Building Systems Research Articles

Design & Analysis of Non-Linear Property of Material for Semi-Rigit, Fixed & Flexible Structural Frames

During an earthquake, failure of structure starts off-evolved at factors of weak spot. This weak point arises due to discontinuity in mass, stiffness and geometry of structure. The systems having this discontinuity are termed as irregular systems. Irregular structures contribute a massive portion of city infrastructure. The effect of vertically irregularities within the seismic overall performance of systems will become definitely vital. The main objective of the analysis is to study the behavior of flat slab system in vertical irregular multi-storied building against different forces acting on it during earthquake. Also, the objective of analysis is to study the structural behavior of shear wall – flat slab interaction with opening. The analysis is made between in the three types of G+9 storey building with 0 % vertical irregularity, 200 % vertical irregularity and 300% vertical irregularity. In all these building’s shear wall is provided with & without 20% opening. Total 15 modeled are studied and their results were compared. Key Words: Flat slab, Vertical Geometric Irregularity, Shear wall with opening, Response Spectrum analysis, STAAD Pro2007

Collective hydrogen stand-alone renewable energy systems for buildings in Spain. Towards the self-sufficiency

The article examines the feasibility of implementing standalone hydrogen-based renewable energy systems in Spanish residential buildings, specifically analyzing the optimization of a solar-battery and solar-hydrogen system for a building with 20 dwellings in Spain. The study initially assesses two standalone setups: solar-battery and solar-hydrogen. Subsequently, it explores scenarios where these systems are connected to the grid to only generate and sell surplus energy. A scenario involving grid connection for self-consumption without storage serves as a benchmark for comparison. All system optimizations are designed to meet energy demands without interruptions while minimizing costs, as determined by a techno-economic analysis. The systems are sized using custom software that incorporates an energy management system and employs the Jaya algorithm for optimization. The findings indicate that selling surplus energy can be economically competitive and enhance the efficiency of grid-connected self-consumption systems, representing the study's main innovation. The conclusion highlights the economic and technical potential of an autonomous hybrid energy system that includes hydrogen, with the significant remaining challenge being the development of a regulatory framework to support its technical feasibility in Spain.

Embodied Carbon Impacts of Building Envelope Systems

Abstract As buildings become more energy efficient due to stringent building codes, the emphasis on reducing the embodied carbon (EC) in the built environment has become significant. Studies predict that between 2020 and 2050, new buildings will surpass operational emissions with higher embodied emissions in their initial decade and throughout their life cycle. To meet decarbonization targets, reducing EC through low-carbon, high-performance building designs and grid decarbonization is crucial. This research analyzes the embodied carbon intensity of 26 commonly used envelope systems of large buildings in Ontario’s Greater Toronto and Hamilton Area (GTHA) using the attributional life cycle assessment (ALCA) methodology. Results highlight the impact of cladding materials, insulation layers, and backup structures on EC. The study ranks envelope assemblies based on their EC intensity (ECI), providing insights for designers to balance operational and embodied emissions. Noteworthy findings include the relatively high ECI of floor systems compared to exterior wall and roof systems. It also emphasized the challenges in assessing the environmental impacts of wood-based products and the need for uncertainty analysis and transparent reporting. The study contributes to understanding EC in building envelopes, guiding design teams toward low-carbon structures and more informed decision-making. As research progresses, recommendations include consequential analysis, assessing biogenic carbon impacts, and material durability studies for a deeper insight on the environmental impacts of building envelope materials.

Sustainable concrete structures by optimising structural and concrete mix design

ABSTRACT Sustainable concrete construction can be achieved by combining optimised structural designs with low-carbon concrete (LCC). This paper demonstrates the importance of sustainable construction by analysing various design options for a typical suspended slab system in high-rise buildings. Pearson (2020) noted that concrete slabs make up approximately 47% of the embodied carbon (EC) in commercial and residential structures, with slabs alone comprising around 70% of the total concrete volume in residential buildings. This presents an opportunity to reduce EC through structural design choices. The analysis in this paper involved designing a post-tensioned (PT) flat slab system for a residential development in Sydney and then re-designing it as a reinforced concrete (RC) slab by adjusting slab thickness and reinforcement system. A key finding was that transitioning from an RC to a PT slab resulted in a 44% total EC reduction when using a 100% General Purpose Cement (GPC) blend. Further EC reductions can be achieved by implementing LCC. The chosen LCC blend for this study is 23% Fly Ash, 23% Ground Granulated Blast Furnace Slag, and 54% Cement (FA/GGBFS/GPC), demonstrating a 36% reduction in EC compared to a 100% GPC blend while maintaining acceptable workability, constructability, mechanical, and durability properties.

Analysis of the technical and economic aspects of gas engine heat pumps in various climates in Iran

Due to the scarcity of fossil fuels and the potential for energy shortages, the use of energy-efficient devices is of utmost importance. There is an increasing trend in the utilization of heat pumps in air conditioning systems (heating/cooling) for both residential and commercial buildings. This article focuses on the analysis of the technical and economic aspects of gas engine heat pumps (GEHP) in various climates throughout Iran. The evaluation of this article revolves around two perspectives: that of the consumers and the government. The implementation of GEHP has been carefully considered from the consumers' perspective to ensure it does not have any negative effects on them. Additionally, from the government's point of view, the available resources are considered, and the supply of electricity and gas, along with their cost and energy consumption, are thoroughly investigated by the Ministries of Energy and Petroleum. The findings indicate that, from the consumers' perspective, the economic efficiency of GEHP can be up to 11 times higher than that of electric heat pumps (EHP). Moreover, from the government's viewpoint, GEHP leads to a reduction of over 92 % in electricity consumption, 5 % in gas consumption, and 92 % in annual expenses for the Ministry of Energy. Furthermore, the implementation of GEHP increases the income of the Ministry of Petroleum by 9.8 times.

Application of Building Management System for Sustainable Buildings: Museums Case Study

Application of Building Management System for Sustainable Buildings: Museums Case Study

Opposing approaches for enhancing energy efficiency in buildings

Abstract This paper proposes two opposing approaches for enhancing energy efficiency in buildings as a part of combating climate change and summarizes interim outcomes from two ongoing research projects. The first project focuses on adopting sustainable design methodologies in new buildings, and the second one aims at ’greening’ old but otherwise economically viable and usable buildings. Finally, the paper points to the potential for an integrated platform for efficient energy management system for buildings for clients and/or owners, albeit with addressing a range of issues.

Livmats Pavilion: Design and Development of a Novel Building System Based on Natural Fibres Coreless-Wound Structural Components for Applications in Architecture

Robotic coreless filament winding with natural fibres and bio-based resin systems offers potential solutions to address productivity and sustainability challenges in the construction sector. Their use in modular, prefabricated structures enables efficient, controlled, and eco-friendly production, yielding high-quality building components with minimal production waste. Plant fibres like flax provide good strength and stiffness while requiring less non-renewable energy compared to traditional fibres like glass or carbon. This research focuses on the use and implementation of flax fibre for coreless filament wound structural components by describing the conceptualization, design, fabrication, and assembly of a full-scale architectural demonstrator, the livMats Pavilion.

Comparative Analysis of Framed-Tube & Braced-Tube System in Tall Buildings Using ETABS

Abstract: Since the rigid frame became popular in the first half of the 20th century, tall buildings with structural systems have evolved. The development of underlying frameworks for tall structures lays on reasonable realism, economy of material utilization, effortlessness and polish, and worry for constructability. We are now able to build buildings that are ever higher thanks to cutting-edge building materials, sophisticated computational software, and sturdy structural systems. The rationale behind the creation of structural systems for tall buildings is to achieve architectural expression, ensure safety and serviceability, and make rational and effective use of materials. The use of composite structures, which combine the advantages of various materials, has been the trend in structural systems for tall buildings. In both static and dynamic conditions, these high-rise structures ought to be able to withstand a variety of lateral loads, such as wind load and earthquake load. This study examines the responses of the Framed Tube, Braced Tube, structural systems to various parameters such as Story displacement, Story drift, Story shear, and time period. The analysis focuses on 60-story structures situated in Seismic Zone III with medium soil conditions. The static analysis of the structures is conducted using the linear static method, which involves wind load calculations using the force coefficient method. On the other hand, the dynamic analysis is performed using the response spectrum method, with wind load calculations carried out using the gust factor calculation method.

Energy Consumption at Accommodation Buildings: A Case Study of a Boutique Hotel-Abdera

Global environmental problems such as decreasing biodiversity, natural disasters, climate change, and energy consumption are among the main concerns of the countries. Approximately 50% of the energy consumed worldwide is spent on architectural construction, use, and operation. The increase in energy consumption in buildings especially has taken the reduction of carbon footprint and the importance of energy efficiency to the fore. Physical environment, climate, orientation, envelope, and material properties are among the different factors in determining energy consumption in buildings. The share of tourism activities in total emissions is estimated to be 5%. However, it is also stated that tourism buildings have a share of 21 % of C02 emissions. This work aimed to research the energy consumption of a boutique hotel in Abdera, Greece. ArchiCAD, Graphisoft, and EcoDesigner software were used in the analysis of findings, and suggestions were put forward. Energy consumption and environmental effects were investigated when active solar systems (Solar Thermal Panel /STP (30 m2), Photovoltaic Panel/PV (30 m2)) were added to the roof surface (total 60 m2 Panel) of the building. The analysis showed that the addition of active solar systems by 30% could reduce emissions. In Greece, which is located in a very favorable region in terms of geographical features, it is very important to use solar potential with integrated systems in buildings to provide energy needs.

Modeling HVAC degradation due to climate shocks and stresses using dynamic Bayesian networks

The impact of climate conditions on infrastructure is a major concern for the sustainability of built environment. Two main issues that add uncertainty and complexity in climate-change impact are of interest: multiple hazard types and non-stationarity of climate actions. This paper proposes an approach using dynamic Bayesian networks to assess the reliability of a building system considering both gradual and extreme climate factors over the service life of the asset. The methodology is illustrated on a case study that examine an HVAC system, considering overheating fault and degradation risk. Compared to conventional Markov model, the results show stochastic dependence in the degradation process at different time instants and hence affect the variability of degradation. The proposed approach includes economic-based impact analysis to determine costs and payoffs accrued as the consequences. By integrating climate stress and shock and accounting for dynamic changes of the hazard, this method helps decision-makers in identifying and prioritizing adaptation strategies for building system under climate change.

COMPARATIVE EXERGY ANALYSIS OF ADIABATIC AND ISOTHERMAL HUMIDIFICATION IN A DIRECT-FLOW CENTRAL AIR CONDITIONING SYSTEM

Central air conditioning systems of buildings and structures are significant consumers of electric and thermal energy of different temperature levels and are the least economical in terms of energy consumption. When designing these systems, due attention is not always paid to assessing their energy efficiency and no variant design is carried out with a comparison of the relevant indicators. This is due to the lack of proven engineering methods. The exergy method of analysing energy-consuming systems provides a correct numerical assessment of energy efficiency and enables a comparative analysis of circuit solutions and system elements. In contrast to the energy method, the peculiarity of the exergy method in relation to air conditioning systems is the possibility of taking into account all available mass and energy flows in the system in exergy units. The extension of the exergy method to systems for creating and maintaining a microclimate in buildings and structures has not yet acquired the status of practical engineering support. This article presents an example of an exergy analysis based on the original methodology for comparing methods of humidification in a central air conditioning system for a public building in order to select the best method in terms of energy efficiency. Two traditional methods of air humidification for the cold season - adiabatic and isothermal - were used for the study and comparison. The results of analytical studies are presented in the form of relative values of exergy.

Deep learning-based automated tile defect detection system for Portuguese cultural heritage buildings

A prominent feature in Portuguese historic architecture is Portugal’s azulejos or tiles that cover cultural heritage buildings with colorful patterns. However, tiles are prone to deterioration due to the quality of masonry materials, exposure over time, and natural and human factors. A careful approach is necessary to detect and assess tile damage in time to conserve cultural heritage. Deep learning (DL) methods are applied to detect deterioration and damage by automating vision-based monitoring. This study uses the You Only Look Once (YOLO), method to detect deterioration in tiles automatically. To obtain the initial dataset, over 5000 images of damage were collected, including cracks, craters, glaze detachment, and tile lacunae, as well as images with no defects. Additionally, a MobileNet model was used for binary classification of damaged and intact tiles to compare classification and detection approaches. Through the fine-tuning of hyperparameters and updating the dataset, an overall accuracy of over 72% for YOLO (multiple classification) and 97% accuracy for binary classification was achieved, demonstrating the adequacy of the tool for real-world applications.

Spectral optical performance of phase-change-material-filled glass-block system: Experimental evaluation and comparative exploration

Research on sustainable building design is pushing boundaries to introduce innovative solutions that enhance energy efficiency and improve user comfort. The integration of phase-change materials (PCMs) into transparent façade elements has gained substantial attention; however, its widespread application in current construction practices remains limited. This study examined the solar/light transmittance of PCM-based materials embedded in transparent façade elements, focusing on providing and comparing the optical properties of modular glass blocks integrated with PCM measured experimentally in a laboratory setting. Optical properties of multi-layer and non-homogeneous systems represent a more complex problem in terms of proper characterisation. To overcome this limitation, more comprehensive approaches can be considered, including integrating spheres to perform measurements on the complex nonhomogeneous glass system. This study employed spectrophotometric measurements within the visible and near-infrared (NIR) spectra by two different measurements methods: a direct method and one using an integrating sphere. Additionally, the investigation was based on a comparison between clear and various PCM-filled glass blocks. The results demonstrated that the direct method facilitated reliable spectral transmittance measurements with deviations not exceeding 3 %. In addition, the results revealed that paraffinic PCM glass blocks in liquid phases could achieve up to 90 % of light transmission and act as a highly transparent system in the visible region compared with conventional air-based glass blocks (up to 77 %). However, in the NIR region, the spectral transmission of PCM glass blocks was reduced by half (around 46 %). Depending on the PCM type in solid phases, the visible transmission is significantly reduced, which is from 5 % to a maximum of 19 %. This study contributes to the expanding knowledge base on adaptive building systems, particularly those related to PCM integration in transparent façade components.

ATP-EMTP simulation of lightning protection system for multi-storey building

Multi-storey buildings with occupied highly technological instruments have more attraction possibilities of a lightning stroke than ordinary residential buildings. A protection system against lightning is necessary for these buildings and the level of the protection system performance is an issue to be examined. In this study, a protection system for a three-storey building is simulated in Alternative Transient Program-Electromagnetic Transients Program (ATP-EMTP). Distributed-parameter line models are used for the conductors of the protective system by modelling vertical conductors as nonuniform lines. The currents flowing in the critical conductors and the voltages at some critical points resulting by a lightning stroke are computed. The conventional lighting parameters required for structural protection such as lightning peak current, current rise time and time interval for the current flowing are determined. The effect of the radius of conductors in the protection system on the surge response is investigated.

Targeted Therapy of Tumors and Cancer Stem Cells based on Oxidant-Regulated Redox Pathway and its Mechanism.

A malignant tumor is a frequent and common disease that severely threatens human health. Many mechanisms, such as cell signaling pathway, anti-apoptosis mechanism, cell stemness, metabolism, and cell phenotype, have been studied to explain the reasons for chemotherapy, radioresistance, and tumor recurrences in antitumor treatment. Cancer stem cells (CSCs) are important tumor cell subclasses that can potentially organize and regulate stem cell properties. Growing evidence suggests that CSCs can initiate tumors and constitute a significant factor in metastasis, recurrence, and treatment resistance. The inability to completely target and remove CSCs is a considerable obstacle in tumor treatment. Therefore, drugs and therapeutic strategies that can effectively intervene with CSCs are essential for the treatment of different tumor types. However, the current strategies and efficacy of targeted elimination of CSCs are very limited. Oxidative stress has been recognized to play a crucial role in cancer pathophysiology. Moreover, reactive oxygen species (ROS) production and imbalance of the built-in cellular antioxidant defense system are hallmarks of tumor and cancer etiology. The current paper will focus on the regulation and mechanism behind oxidative stress in tumors and cancer stem cells and its tumor therapy applications. Additionally, the article discusses the role of CSCs in causing tumor treatment resistance and recurrence based on a redox perspective. The study also emphasizes that targeted modulation of oxidative stress in CSCs has great potential in tumor therapy, providing novel prospects for tumor therapy.

재난안전관리체계 평가모형을 활용한 다중이용시설 안전관리 사례 연구

This study was conducted on the safety management of multi-use facilities using a disaster safety management system evaluation model, focusing on the case of Company A. Sports facilities within multi-use facilities are used by an unspecified number of people and require quick judgment and initial response from safety managers in the event of an emergency. In the event of an emergency such as a fire, it is important to respond to the delay in evacuation time for users of sports facilities on the top floor. The building managed by Company A has facilities such as a swimming pool, fitness center, sauna, indoor golf course, and yoga𐄁pilates room located on the top floor. We analyzed Company A's case of sports facilities in a building that is both a complex building and a multi-use facility. The building in question is located in Seoul, and the safety management case of Company A was studied in the following order building safety organization and system establishment, safety management capabilities, safety management activities, education and training, and evaluation feedback. Through this, we studied key management issues and vulnerabilities requiring safety in multi-use facilities, as well as cases of fire drills and evacuation measures to prepare for disaster occurrences, and focused on the safety management system of multi-use facilities and conducted research on sports facilities within multi-use facilities safety and improvement measures were derived. By applying Company A's safety management best practices to the research model, the company's safety management can be effectively analyzed and examined. Through this study, we would like to make suggestions so that safety managers of buildings with sports facilities in multi-use facilities can use them as a reference.

Post-earthquake building services downtime distribution: a case study of the 2016 Kumamoto, Japan, earthquake

Seismic damage to building services systems, that is, mechanical, electrical, and plumbing systems in buildings related to energy and indoor environments, affects the functionality of buildings. Assessing post-earthquake functionality is useful for enhancing the seismic resilience of buildings via improved design. Such assessments require a model for predicting the time required to restore building services. This study analyzes the downtime data for 250 instances of damage to building services components caused by the 2016 Kumamoto earthquake in Japan, presumably obtained from buildings with minor or no structural damage. The objectives of this study are (1) to determine the empirical downtime distribution of building services components and (2) to assess the dependence of the downtime on explanatory variables. A survival analysis, which is a statistical technique for analyzing time-to-event data, reveals that (1) the median downtime of building services components was 90 days and, 7 months after the earthquake, the empirical non-restoration probability was approximately 32%, (2) the services type and the building use are explanatory variables having a statistically significant effect on the downtime of building services components, (3) the log-logistic regression model reasonably captures the trend of the restoration of building services components, (4) medical and welfare facilities and hotels restored building services components relatively quickly, and (5) the 7-month restoration probability was observed to be highest for electrical systems, followed by sanitary systems, then heating, ventilation, and air conditioning systems, and finally life safety systems. These results provide useful information to support the resilience-based seismic design of buildings.

Electric Vehicle Charging Infrastructure Study for Apartment Buildings

Changes in the engine type of cars aimed at climate goals also have an impact on the habit of electricity consumption at home. Charging electric cars from the residential grid also increases the total electricity consumption of the residential building. If all apartment owners in an apartment building want to charge their electric car at the same time, this may create a situation where the main protection of the apartment building is activated. The purpose of this research is to identify possible options to avoid this problem, based on different real-life data. For example: adding an energy storage to the electrical system of an apartment building is seen as one solution. Also supplement of an energy management software to the electrical and battery bank system to enables residents to schedule and prioritize their electric car charging times to avoid simultaneous high-demand periods. This system can also be used to optimize electricity distribution and consumption in apartment buildings under volatile electricity price conditions.

Innovations in architectural and environmental design: From methodologies to technology and cultural sensitivity

This comprehensive paper delves into the multifaceted world of contemporary architectural and environmental design, exploring an array of methodologies that emphasize sustainability, technological innovation, and socio-cultural integration. It begins by discussing the Integrated Design Process (IDP), which fosters early-stage collaboration across various disciplines, illustrated by the example of Seattles Bullitt Center. The paper then explores the principles of Biophilic Design, highlighting its positive impacts on human health and well-being, as seen in Singapores Khoo Teck Puat Hospital. The concept of Adaptive Reuse is explored next, emphasizing its role in sustainable urban development, with the Tate Modern in London serving as a case study. Further, the paper examines Green Building Technologies, Digital Design and Simulation Tools like BIM, and Smart Building Systems, showcasing their contributions to sustainable and efficient building management. The final sections discuss the importance of Community Engagement, Cultural Sensitivity in Design, and Inclusive Design, stressing the need for architecture that resonates with community values and is accessible to all. Through these discussions, the paper provides an insightful look into the current trends and future directions in architecture and environmental design, advocating for a holistic approach that balances functionality, sustainability, and cultural relevance.