Synthetic Mimics Of Antimicrobial Peptides Research Articles

Combating drug-resistant bacteria with sulfonium cationic poly(methionine).

antibiotic resistance and drug-resistant bacterial infections pose significant threats to public health. Antimicrobial peptides (AMPs) are a promising candidate for related-infection therapy, but their clinical application is limited by their high synthesis cost and susceptibility to protease degradation. To address these issues, cationic poly(α-amino acid)s based on lysine have been developed as synthetic mimics of AMPs. In this study, we introduce a new class of cationic AMP synthetic mimics based on functional poly(methionine)s. We synthesized a series of sulfonium cationic poly(d,l-methionine)s with varying chain lengths via a convenient polymerization on α-amino acid thiocarboxyanhydride (α-NTA) using tert-butyl-benzylamine as the initiator, followed by alkylation with iodomethane. Our optimal methionine polymer demonstrated potent and broad-spectrum antibacterial activity against antibiotic-resistant bacteria, as well as excellent biocompatibility with mammalian cells and rapid bactericidal performance. Our findings suggest that sulfonium poly(methionine)s have the potential to address the challenge of drug-resistant bacterial infections.

Evaluation of the Antimicrobial Activity in Host-Mimicking Media and In Vivo Toxicity of Antimicrobial Polymers as Functional Mimics of AMPs.

Activity tests for synthetic antimicrobial compounds are often limited to the minimal inhibitory concentration assay using standard media and bacterial strains. In this study, a family of acrylamide copolymers that act as synthetic mimics of antimicrobial peptides were synthesized and shown to have a disruptive effect on bacterial membranes and structural integrity through microscopy techniques and membrane polarization experiments. The polymers were tested for their antimicrobial properties using media that mimic clinically relevant conditions. Additionally, their activity was compared in two different strains of the Gram-positive bacterium Staphylococcus aureus and the Gram-negative bacterium Pseudomonas aeruginosa. We showed that the medium composition can have an important influence on the polymer activity as there was a considerable reduction in minimal inhibitory concentrations against S. aureus grown in synthetic wound fluid (SWF), and against P. aeruginosa grown in synthetic cystic fibrosis sputum media (SCFM), compared to the concentrations in standard testing media. In contrast, we observed a complete loss of activity against P. aeruginosa in the serum-containing SWF. Finally, we made use of an emerging invertebrate in vivo model, using Galleria mellonella larvae, to assess toxicity of the polymeric antimicrobials, showing a good correlation with cell line toxicity measurements and demonstrating its potential in the evaluation of novel antimicrobial materials.

Antimicrobial Peptide Mimics for Clinical Use: Does Size Matter?

The search for efficient antimicrobial therapies that can alleviate suffering caused by infections from resistant bacteria is more urgent than ever before. Infections caused by multi-resistant pathogens represent a significant and increasing burden to healthcare and society and researcher are investigating new classes of bioactive compounds to slow down this development. Antimicrobial peptides from the innate immune system represent one promising class that offers a potential solution to the antibiotic resistance problem due to their mode of action on the microbial membranes. However, challenges associated with pharmacokinetics, bioavailability and off-target toxicity are slowing down the advancement and use of innate defensive peptides. Improving the therapeutic properties of these peptides is a strategy for reducing the clinical limitations and synthetic mimics of antimicrobial peptides are emerging as a promising class of molecules for a variety of antimicrobial applications. These compounds can be made significantly shorter while maintaining, or even improving antimicrobial properties, and several downsized synthetic mimics are now in clinical development for a range of infectious diseases. A variety of strategies can be employed to prepare these small compounds and this review describes the different compounds developed to date by adhering to a minimum pharmacophore based on an amphiphilic balance between cationic charge and hydrophobicity. These compounds can be made as small as dipeptides, circumventing the need for large compounds with elaborate three-dimensional structures to generate simplified and potent antimicrobial mimics for a range of medical applications. This review highlight key and recent development in the field of small antimicrobial peptide mimics as a promising class of antimicrobials, illustrating just how small you can go.

Stereochemical Effects on the Antimicrobial Properties of Tetrasubstituted 2,5-Diketopiperazines.

Antimicrobial drug resistance is a looming health crisis facing us in the modern era, and new drugs are urgently needed to combat this growing problem. Synthetic mimics of antimicrobial peptides have recently emerged as a promising class of compounds for the treatment of persistent microbial infections. In the current study, we investigate five cyclic N-alkylated amphiphilic 2,5-diketopiperazines against 15 different strains of bacteria and fungi, including drug-resistant clinical isolates. Several of the 2,5-diketopiperazines displayed activities similar or superior to antibiotics currently in clinical use, with activities coupled to both the cationic and hydrophobic substituents. All possible stereoisomers of the lead peptide were prepared, and the effects of stereochemistry and amphiphilicity were investigated via 1D and 2D NMR spectroscopy, solution dynamics, and membrane interaction modeling. Clear differences in solution structures and membrane interaction potentials explain the differences seen in the bioactivity and physicochemical properties of each stereoisomer.

Main-chain flexibility and hydrophobicity of ionenes strongly impact their antimicrobial activity: an extended study on drug resistance strains and Mycobacterium.

The spread of antibiotic-resistant pathogens and the resurgence of tuberculosis disease are major motivations to search for novel antimicrobial agents. Some promising candidates in this respect are cationic polymers, also known as synthetic mimics of antimicrobial peptides (SMAMPs), which act through the membrane-lytic mechanism. Development of resistance toward SMAMPs is less likely than toward currently employed antibiotics; however, further studies are needed to better understand their structure–activity relationship. The main objective of this work is to understand the cross-influence of hydrophobicity, main-chain flexibility, and the topology of ionenes (polycations containing a cationic moiety within the main-chain) on activity. To fulfill this goal, a library of ionenes was developed and compared with previously investigated molecules. The obtained compounds display promising activity against the model microorganisms and drug-resistance clinical isolates, including Mycobacterium tuberculosis. The killing efficiency was also investigated, and results confirm a strong effect of hydrophobicity, revealing higher activity for molecules possessing the flexible linker within the polymer main-chain.

Synthetic Mimics of Antimicrobial Peptides for the Targeted Therapy of Multidrug-Resistant Bacterial Infection.

Antibacterial materials are highly demanded in treatment of bacterial infection, especially severe ones with multidrug-resistance. Herein, pH-responsive polypeptide, i.e., poly-L-lysine modified by 1-(propylthio)acetic acid-3-octylimidazolium and citraconic anhydride (PLL-POIM-CA), is synthesized by post-polymerization modification of poly-L-lysine (PLL) with 1-(propylthio)acetic acid-3-octylimidazolium (POIM) and citraconic anhydride (CA). It is observed that PLL-POIM-CA is stable under normal physiological condition, while CA cleaves rapidly at weakly acidic environment like bacterial infectious sites. The hydrolyzed PLL-POIM-CA exhibits excellent broad-spectrum antibacterial activities against Gram-negative bacteria of Escherichia coli and Gram-positive bacteria of Staphylococcus aureus and methicillin-resistant Staphylococcus aureus (MRSA). In particular, the minimum inhibitory concentration (MIC) against multidrug-resistant bacteria like MRSA is as low as 7.8µg mL-1 . Moreover, PLL-POIM-CA exhibits good biocompatibility with mouse fibroblast cells (L929) in vitro and improved hemocompatibility with an HC50 exceeding 5000µg mL-1 . Therefore, PLL-POIM-CA displays an excellent bacteria versus cells selectivity (HC50 /MIC) over 534, which is 53 times higher than natural antimicrobial peptide of indolicidin. It is further demonstrated in vivo that the antimicrobial polypeptide effectively accelerates MRSA-infected wound healing by relieving local inflammatory response. Therefore, this targeted antimicrobial polypeptide has broad application prospects for the treatment of multidrug-resistant bacterial infection.

How Do Polymer Coatings Affect the Growth and Bacterial Population of a Biofilm Formed by Total Human Salivary Bacteria?-A Study by 16S-RNA Sequencing.

Antimicrobial surface modifications are required to prevent biomaterial-associated biofilm infections, which are also a major concern for oral implants. The aim of this study was to evaluate the influence of three different coatings on the biofilm formed by human saliva. Biofilms grown from human saliva on three different bioactive poly(oxanorbornene)-based polymer coatings (the protein-repellent PSB: poly(oxanorbornene)-based poly(sulfobetaine), the protein-repellent and antimicrobial PZI: poly(carboxyzwitterion), and the mildly antimicrobial and protein-adhesive SMAMP: synthetic mimics of antimicrobial peptides) were analyzed and compared with the microbial composition of saliva, biofilms grown on uncoated substrates, and biofilms grown in the presence of chlorhexidine digluconate. It was found that the polymer coatings significantly reduced the amount of adherent bacteria and strongly altered the microbial composition, as analyzed by 16S RNA sequencing. This may hold relevance for maintaining oral health and the outcome of oral implants due to the existing synergism between the host and the oral microbiome. Especially the reduction of some bacterial species that are associated with poor oral health such as Tannerella forsythia and Fusobacterium nucleatum (observed for PSB and SMAMP), and Prevotella denticola (observed for all coatings) may positively modulate the oral biofilm, including in situ.

In vitro and in vivo antibacterial properties of peptide AMC-109 impregnated wound dressings and gels.

Synthetic mimics of antimicrobial peptides (AMPs) is a promising class of molecules for a variety of antimicrobial applications. Several hurdles must be passed before effective systemic infection therapies with AMPs can be achieved, but the path to effective topical treatment of skin, nail, and soft tissue infections appears less challenging to navigate. Skin and soft tissue infection is closely coupled to the emergence of antibiotic resistance and represents a major burden to the healthcare system. The present study evaluates the promising synthetic cationic AMP mimic, AMC-109, for treatment of skin infections in vivo. The compound is evaluated both in impregnated cotton wound dressings and in a gel formulation against skin infections caused by Staphylococcus aureus and methicillin resistant S. aureus. Both the ability to prevent colonization and formation of an infection, as well as eradicate an ongoing infection in vivo with a high bacterial load, were evaluated. The present work demonstrates that AMC-109 displays a significantly higher antibacterial activity with up to a seven-log reduction in bacterial loads compared to current clinical standard therapy; Altargo cream (1% retapamulin) and Fucidin cream (2% fusidic acid) in the in vivo wound models. It is thus concluded that AMC-109 represents a promising entry in the development of new and effective remedies for various skin infections.

Recent advances in design of antimicrobial peptides and polypeptides toward clinical translation.

The recent outbreaks of infectious diseases caused by multidrug-resistant pathogens have sounded a piercing alarm for the need of new effective antimicrobial agents to guard public health. Among different types of candidates, antimicrobial peptides (AMPs) and the synthetic mimics of AMPs (SMAMPs) have attracted significant enthusiasm in the past thirty years, due to their unique membrane-active antimicrobial mechanism and broad-spectrum antimicrobial activity. The extensive research has brought many drug candidates into clinical and pre-clinical development. Despite tremendous progresses have been made, several major challenges inherent to current design strategies have slowed down the clinical translational development of AMPs and SMAMPs. However, these challenges also triggered many efforts to redesign and repurpose AMPs. In this review, we will first give an overview on AMPs and their synthetic mimics, and then discuss the current status of their clinical translation. Finally, the recent advances in redesign and repurposing AMPs and SMAMPs are highlighted.

Poly(oxanorbornene)-Coated CdTe Quantum Dots as Antibacterial Agents.

In this study, synthetic mimics of antimicrobial peptides based on poly(oxanorbornene) molecules (or PONs) were used to coat CdTe quantum dots (QDs). These PONs-CdTe QDs were investigated for their activity against Escherichia coli, a bacterium with antibiotic resistant strains. At the same time, the antibacterial activity of the PONs-CdTe QDs was compared to the antibacterial activity of free PONs and free CdTe QDs. The observed antibacterial activity of the PONs-CdTe QDs was additive and concentration dependent. The conjugates had a significantly lower minimum inhibitory concentration (MIC) than the free PONs and QDs, particularly for PONs-CdTe QDs which contained PONs of high amine density. The maximum activity of PONs-CdTe QDs was not realized by conjugating PONs with the highest intrinsic antibacterial activity (i.e., the lowest MIC in solution as free PONs), indicating that the mechanism of action for free PONs and PONs-CdTe QDs is different. Equally important, conjugating PONs to CdTe QDs decreased their hemolytic activity against red blood cells compared to free PONs, lending to higher therapeutic indices against E. coli. This could potentially enable the use of higher, and therefore more effective, PONs-QDs concentrations when addressing bacterial contamination, without concerns of adverse impacts on mammalian cells and organisms.

Stimulus-Responsive Polyzwitterionic Surfaces Made from Itaconic Acid: Self-Triggered Antimicrobial Activity, Protein Repellency, and Cell Compatibility.

A functional monomer carrying a carboxylate and a protected primary ammonium group is synthesized from itaconic acid. When copolymerized with dimethyl acrylamide and 4-methacryloyloxybenzophenone, cross-linkable polyzwitterions are obtained. These are converted to surface-attached polyzwitterion networks by simultaneous UV-triggered C,H insertion reactions. The resulting polyzwitterion-coated substrates were studied by surface plasmon resonance spectroscopy measurements, ζ potential and various biological assays. They were (expectedly) protein repellent, yet at the same time (and unexpectedly) cell-adhesive and antimicrobially active. This was attributed to stimulus-responsiveness of the polyzwitterion (confirmed by the ζ potential measurements), which enables charge adjustment at different pH values. When protonated, the polyzwitterions become amphiphilic polycations and, in this state, kill bacteria upon contact like their parent structures (polymer-based synthetic mimics of antimicrobial peptides, SMAMPs).

Asymmetrically Substituted Poly(diitaconates) Obtained by Reversible Addition‐Fragmentation Chain Transfer (RAFT) Polymerization: Synthesis, Copolymerization Parameters, and Antimicrobial Activity

AbstractAsymmetrically substituted poly(diitaconate) copolymers are synthesized from 1‐((N‐tert‐butoxycarbonyl)‐2‐aminoethyl)‐4‐propyl diitaconate (PrIA) and different comonomers (N,N‐dimethyl‐acrylamide, DMAA; acrylic acid; or ((N‐tert‐butoxycarbonyl)‐2‐aminoethyl)methacrylate) by reversible addition–fragmentation chain transfer polymerization (RAFT). The RAFT copolymerization parameters of PrIA and DMAA are rDMAA = 0.49 and rPrIA = 0.17, compared to rDMAA = 0.52 and rPrIA = 0.54 obtained by free radical copolymerization (FRP). Thus, the RAFT process has a stronger trend to alternating polymerization than the FRP process. The polydispersity index of the RAFT copolymers is around 1.2–1.8, compared to 2.8–2.9 for the corresponding FRP copolymers. After removal of the tert‐butoxycarbonyl protective groups, antimicrobially active synthetic mimics of antimicrobial peptides are obtained. The thus activated poly(PrIA‐co‐DMAA) copolymers (repeat unit ratio 1:1) have an increasing activity against Escherichia coli and Staphylococcus aureus with increasing molar mass. The RAFT copolymers are slightly more active and less toxic than comparable FRP polymers, leading to a higher selectivity for bacteria over mammalian cells. Higher molar fractions of PrIA in poly(PrIA‐co‐DMAA) copolymers (up to 80 mol%) do not increase their antimicrobial activity; reduction of the BuIA content in poly(BuIA‐DMAA) (down to 10 mol%) leads to a loss of activity against both E. coli and S. aureus.

Structure-Activity Study of Antibacterial Poly(ester urethane)s with Uniform Distribution of Hydrophobic and Cationic Groups.

Infections associated with antibiotic-resistant bacteria have become a threat to the global public health. Antimicrobial polymers, which are synthetic mimics of antimicrobial peptides, have gained increasing attention, as they may have a lower chance of inducing resistance. The cationic-hydrophobic balance and distribution of cationic and hydrophobic moieties of these polymers is known to have a major effect on antimicrobial activity. We studied the properties of a series of facially amphiphilic antimicrobial surfactant-like poly(ester urethane)s with different hydrophobic pendant groups (P1, P2, and P3) and cationic groups distributed uniformly along the polymer chain. These polymers exhibited bactericidal activity against Gram-negative Escherichia coli and Pseudomonas aeruginosa, as well as Gram-positive Staphylococcus aureus and Staphylococcus epidermidis. Microscopy and dye release assays demonstrated that these polymers cause membrane disruption, which is dependent on the cationic-hydrophobic ratio in the polymer. Membrane permeability assays revealed that these polymers can permeabilize the outer membrane of E. coli and damage the cytoplasmic membrane of both E. coli and S. aureus. In addition, our results indicate that the three polymers exhibit a different extent of membrane disruption against E. coli. P1 caused minor damage to the cytoplasmic membrane integrity, but it was able to dissipate the cytoplasmic membrane potential, leading to cell death. P2 and P3 depolarized the cytoplasmic membrane and also caused significant damage to the cytoplasmic membrane. Overall, we showed a new class of broad-spectrum bactericidal polymers whose membrane disrupting ability against E. coli correlates with the structural differences of the hydrophobic pendant groups.

Synthesis and Bioactivity of Polymer-Based Synthetic Mimics of Antimicrobial Peptides (SMAMPs) Made from Asymmetrically Disubstituted Itaconates.

A series of asymmetrically disubstituted diitaconate monomers is presented. Starting from itaconic anhydride, functional groups could be placed selectively at the two nonequivalent carbonyl groups. By using 2D NMR spectroscopy, it was shown that the first functionalization step occurred at the carbonyl group in the β position to the double bond. These monomers were copolymerized with N,N-dimethylacrylamide (DMAA) to yield polymer-based synthetic mimics of antimicrobial peptides (SMAMPs). They were obtained by free radical polymerization, a metal-free process, and still maintained facial amphiphilicity at the repeat unit level. This eliminates the need for laborious metal removal and is advantageous from a regulatory and product safety perspective. The poly(diitaconate-co-DMAA) copolymers obtained were statistical to alternating, and the monomer feed ratio roughly matched that of the repeat unit content of the copolymers. Investigations of varied R group hydrophobicity, repeat unit ratio, and molecular mass on antimicrobial activity against Escherichia coli and on compatibility with human keratinocytes showed that the polymers with the longest R groups and lowest DMAA content were the most antimicrobial and hemolytic. This is in agreement with the biological activity of previously reported SMAMPs. Thus, the design concept of facial amphiphilicity has successfully been transferred, but the selectivity of these polymers for bacteria over mammalian cells still needs to be optimized.

Antibacterial Polymers – A Mini Review

Multidrug resistance of pathogenic bacteria is a major health concern. Deterioration in the discovery of novel antibiotics exacerbates the situation even further. Antimicrobial polymers could have a significant role in this global effort to fight back this problem. This review paper focuses on the recent advances in the synthesis of membrane-active antimicrobial polymers, their classification and mode of action. Amphiphilic antimicrobial polymers, which are synthetic mimics of antimicrobial peptides, have received much attention as they have lower susceptibility for developing resistance than other small molecular antibiotics. In addition, control over their structural parameters – like hydrophobicity/ hydrophilicity balance, cationicity, molecular weight, functional groups, degree of polymerization, chain length – may enhance their antimicrobial activities while minimizing toxicity to mammalian cells.

Short Cationic Antimicrobial Peptides Display Superior Antifungal Activities toward Candidiasis and Onychomycosis in Comparison with Terbinafine and Amorolfine.

Novel antifungals are in high demand due to the challenges associated with resistant, persistent, and systemic fungal infections. Synthetic mimics of antimicrobial peptides are emerging as a promising class of compounds for antifungal treatment. In the current study, five synthetic cationic antimicrobial tripeptides were evaluated as antifungal therapeutics against 24 pathogenic strains of fungi. Three of the peptides displayed strong general antifungal properties at low micromolar inhibitory concentrations. The most promising peptide, compound 5, was selected and evaluated as an antifungal remedy for Candida albicans candidiasis in a human skin model and for the treatment of Trichophyton rubrum induced onychomycosis in an infected human nail model. Compound 5 was shown to display antifungal properties and a rapid mode of action superior to those of both the commercial comparators Loceryl and Lamisil. Compound 5 was also active against a clinical isolate of Candida albicans with acquired fluconazole resistance.

Synthetic Mimics of Antimicrobial Peptides (SMAMPs) in Layer‐by‐Layer Architectures: Possibilities and Limitations

Polymer‐based synthetic mimics of antimicrobial peptides (SMAMPs) show promising antimicrobial activity in solution and as surface‐attached networks. In this paper, their potential as active ingredients in layer‐by‐layer (LbL) assemblies is evaluated. These consist of the weak, anionic polyelectrolyte poly(acrylic acid), and either the hydrophobic butyl SMAMP or the hydrophilic diamine SMAMP (both of which are cationic, weak polyelectrolytes). In situ surface plasmon resonance spectroscopy is used to optimize the LbL assembly conditions. An “overshooting” is observed when depositing the SMAMP layer. Zeta potential measurements show that the layer charge inversion is reduced at each build‐up step due to layer interpenetration. Thus, the positive charge of LbL assemblies with SMAMPs as the top layer is low; a significant part is consumed to maintain layer stability. This leads to reduced antimicrobial activity. Fine‐tuning of the assembly and post‐treatment conditions leads to SMAMP‐PAA LbL systems with optimized antimicrobial activity and stability. image

Development of a standardized and safe airborne antibacterial assay, and its evaluation on antibacterial biomimetic model surfaces.

Bacterial infection of biomaterials is a major concern in medicine, and different kinds of antimicrobial biomaterial have been developed to deal with this problem. To test the antimicrobial performance of these biomaterials, the airborne bacterial assay is used, which involves the formation of biohazardous bacterial aerosols. We here describe a new experimental set-up which allows safe handling of such pathogenic aerosols, and standardizes critical parameters of this otherwise intractable and strongly user-dependent assay. With this new method, reproducible, thorough antimicrobial data (number of colony forming units and live-dead-stain) was obtained. Poly(oxonorbornene)-based Synthetic Mimics of Antimicrobial Peptides (SMAMPs) were used as antimicrobial test samples. The assay was able to differentiate even between subtle sample differences, such as different sample thicknesses. With this new set-up, the airborne bacterial assay was thus established as a useful, reliable, and realistic experimental method to simulate the contamination of biomaterials with bacteria, for example in an intraoperative setting.

Two interdependent mechanisms of antimicrobial activity allow for efficient killing in nylon-3-based polymeric mimics of innate immunity peptides

Novel synthetic mimics of antimicrobial peptides have been developed to exhibit structural properties and antimicrobial activity similar to those of natural antimicrobial peptides (AMPs) of the innate immune system. These molecules have a number of potential advantages over conventional antibiotics, including reduced bacterial resistance, cost-effective preparation, and customizable designs. In this study, we investigate a family of nylon-3 polymer-based antimicrobials. By combining vesicle dye leakage, bacterial permeation, and bactericidal assays with small-angle X-ray scattering (SAXS), we find that these polymers are capable of two interdependent mechanisms of action: permeation of bacterial membranes and binding to intracellular targets such as DNA, with the latter necessarily dependent on the former. We systemically examine polymer-induced membrane deformation modes across a range of lipid compositions that mimic both bacteria and mammalian cell membranes. The results show that the polymers' ability to generate negative Gaussian curvature (NGC), a topological requirement for membrane permeation and cellular entry, in model Escherichia coli membranes correlates with their ability to permeate membranes without complete membrane disruption and kill E. coli cells. Our findings suggest that these polymers operate with a concentration-dependent mechanism of action: at low concentrations permeation and DNA binding occur without membrane disruption, while at high concentrations complete disruption of the membrane occurs. This article is part of a Special Issue entitled: Interfacially Active Peptides and Proteins. Guest Editors: William C. Wimley and Kalina Hristova.

Nature-inspired antimicrobial polymers--assessment of their potential for biomedical applications.

We explored the potential of poly(oxonorbornene)-based synthetic mimics of antimicrobial peptides (SMAMPs), a promising new class of antimicrobial polymers with cell-selectivity and low resistance development potential, for clinical applications. We evaluated their antimicrobial activity against a panel of seven clinical and regulatory relevant bacteria strains, and tested their toxicity with two different kinds of primary human cells. For the antimicrobial activity, we performed the minimum inhibitory concentration (MIC) assay and determined the minimum bactericidal concentration (MBC) according to the NCCLS guidelines. The results revealed specific problems that may occur when testing the antimicrobial activity of amphiphilic cationic polymers, and confirmed the working hypothesis that the more hydrophilic SMAMP polymers in our portfolio were ‘doubly selective’, i.e. they are not only selective for bacteria over mammalian cells, but also for Gram-positive over Gram-negative bacteria. The data also showed that we could improve the broad-band activity of one SMAMP, and in combination with the results from the cell toxicity experiments, identified this polymer as a promising candidate for further in-vitro and in-vivo testing. Transmission electron studies revealed that the cellular envelopes of both E. coli and S. aureus were severely damaged due to SMAMP action on the bacterial membrane, which strengthened the argument that SMAMPs closely resemble antimicrobial peptides. To test cell toxicity, we used the traditional hemolysis assay with human red blood cells, and the novel xCelligence assay with primary human fibroblasts. The data reported here is the first example in which a hemolysis assay is benchmarked against the xCelligence assay. It revealed that the same trends were obtained using these complementary methods. This establishes the xCelligence assay with primary human cells as a useful tool for SMAMP characterization.