Synthetic Amorphous Silica Research Articles

Critical review of the safety assessment of nano-structured silica additives in food.

The development of nano-materials is viewed as one of the most important technological advances of the 21st century and new applications of nano-sized particles in the production, processing, packaging or storage of food are expected to emerge soon. This trend of growing commercialization of engineered nano-particles as part of modern diet will substantially increase oral exposure. Contrary to the proven benefits of nano-materials, however, possible adverse health effects have generally received less attention. This problem is very well illustrated by nano-structured synthetic amorphous silica (SAS), which is a common food additive since several decades although the relevant risk assessment has never been satisfactorily completed. A no observed adverse effect level of 2500 mg SAS particles/kg body weight per day was derived from the only available long-term administration study in rodents. However, extrapolation to a safe daily intake for humans is problematic due to limitations of this chronic animal study and knowledge gaps as to possible local intestinal effects of SAS particles, primarily on the gut-associated lymphoid system. This uncertainty is aggravated by digestion experiments indicating that dietary SAS particles preserve their nano-sized structure when reaching the intestinal lumen. An important aspect is whether food-borne particles like SAS alter the function of dendritic cells that, embedded in the intestinal mucosa, act as first-line sentinels of foreign materials. We conclude that nano-particles do not represent a completely new threat and that most potential risks can be assessed following procedures established for conventional chemical hazards. However, specific properties of food-borne nano-particles should be further examined and, for that purpose, in vitro tests with decision-making cells of the immune system are needed to complement existing in vivo studies.

Cross-Sectional Study on Nonmalignant Respiratory Morbidity due to Exposure to Synthetic Amorphous Silica.

The aim of this study was to assess the health impact of chronic exposure to synthetic amorphous silica (SAS) on nonmalignant respiratory morbidity. We used multiple linear and logistic regression models and Monte Carlo multimodel analyses of two exposure scenarios to evaluate the effect of cumulative exposure to inhalable SAS dust on symptoms, spirometry, and chest films in 462 male workers from five German SAS-producing plants. Exposure to SAS was associated with a reduction in forced vital capacity (FVC) in one of the two exposure scenarios but had no effect on forced expiratory volume in 1 second (FEV1) or FEV1/FVC in either exposure scenario. Monte Carlo analysis indicated a decline in FVC of -11 mL per 10 mg/m-years exposure (-6 to -0.4). Chest films showed no evidence of pneumoconiosis. This study provides limited evidence of minor dose-related effects of chronic exposure to SAS on lung function.

Genotoxic effects of synthetic amorphous silica nanoparticles in the mouse lymphoma assay.

Synthetic amorphous silica nanoparticles (SAS NPs) have been used in various industries, such as plastics, glass, paints, electronics, synthetic rubber, in pharmaceutical drug tablets, and a as food additive in many processed foods. There are few studies in the literature on NPs using gene mutation approaches in mammalian cells, which represents an important gap for genotoxic risk estimations. To fill this gap, the mouse lymphoma L5178Y/Tk+/− assay (MLA) was used to evaluate the mutagenic effect for five different concentrations (from 0.01 to 150 μg/mL) of two different sizes of SAS NPs (7.172 and 7.652 nm) and a fine collodial form of silicon dioxide (SiO2). This assay detects a broad spectrum of mutational events, from point mutations to chromosome alterations. The results obtained indicate that the two selected SAS NPs are mutagenic in the MLA assay, showing a concentration-dependent effect. The relative mutagenic potencies according to the induced mutant frequency (IMF) are as follows: SAS NPs (7.172 nm) (IMF = 705.5 × 10−6), SAS NPs (7.652 nm) (IMF = 575.5 × 10−6), and SiO2 (IMF = 57.5 × 10−6). These in vitro results, obtained from mouse lymphoma cells, support the genotoxic potential of NPs as well as focus the discussion of the benefits/risks associated with their use in different areas.

Multimethod approach for the detection and characterisation of food-grade synthetic amorphous silica nanoparticles

Synthetic amorphous silica (SAS) has been used as food additive under the code E551 for decades and the agrifood sector is considered a main exposure vector for humans and environment. However, there is still a lack of detailed methodologies for the determination of SAS’ particle size and concentration. This work presents the detection and characterization of NPs in eleven different food-grade SAS samples, following a reasoned and detailed sequential methodology. Dynamic Light Scattering (DLS), Multiangle Light Scattering (MALS), Asymmetric Flow-Field Flow Fractionation (AF4), Inductively Coupled Plasma Mass Spectrometry (ICPMS) and Transmission Electron Microscopy (TEM) were used. The suitability and limitations, information derived from each type of analytical technique and implications related to current EC Regulation 1169/2011 on the provision of food information to consumers are deeply discussed. In general the z-average, AF4 hydrodynamic diameters and root mean square (rms) radii measured were in good agreement. AF4-ICPMS coupling and pre channel calibration with silica NPs standards allowed the reliable detection of NPs below 100nm for ten of eleven samples (AF4 diameters between 20.6 and 39.8nm) and to quantify the mass concentration in seven different samples (at mgL−1 concentration level). TEM characterisation included the determination of the minimum detectable size and subsequent measurement of the equivalent circle diameter (ECD) of primary particles and small aggregates, which were between 10.3 and 20.3nm. Because of the dynamic size application range is limited by the minimum detectable size, all the techniques in this work can be used only as positive tests.

Opinion of the Scientific Committee on Consumer Safety (SCCS) – Revision of the opinion on the safety of the use of Silica, Hydrated Silica, and Silica Surface Modified with Alkyl Silylates (nano form) in cosmetic products

Conclusion of the opinionThe SCCS has concluded that the evidence, both provided in the submission and that available in scientific literature, is inadequate and insufficient to allow drawing any firm conclusion either for or against the safety of any of the individual SAS material, or any of the SAS categories that are intended for use in cosmetic products.As the SCCS has not been able to conclude on the safety of the synthetic amorphous silica (SAS) materials included in the current submission, the Applicant is advised to follow the SCCS Guidance on Risk Assessment of Nanomaterials (SCCS/1484/12).A brief summary is provided to enable/facilitate future evaluation of the SAS materials in cosmetic products.

Physical boundaries within aggregates – differences between amorphous, para‐crystalline, and crystalline Structures

The structural properties of finely divided inorganic materials such as metal and metalloid oxides, silicates or carbonates of both synthetic and natural origin are compared by means of electron microscopy and tomography. The structure of the outer surfaces of various compact or compacted agglomerates may suggest some striking similarities between various amorphous silica on the one hand and crystalline titania and alumina on the other however the details of the interior fine structure are completely different. Inside of the crystalline aggregates of, for example, alumina and titania distinct grain boundaries between the inter-grown primary crystallites exist. Also physical boundaries between different solid phases and crystalline/amorphous transitions in core/shell structures can occur. No physical grain or phase boundaries were found inside of synthetic amorphous silica or para-crystalline carbon black thus, the aggregate is the constituent particle. Synthetic amorphous silica from different production technologies (fumed/pyrogenic, precipitated, aerogel, gel) may exhibit different macro-morphology but distinct similarities of the amorphous silica networks. Computational studies on silica and titania underline the stability of constituent particles and aggregates as observed by means of TEM after dispersing the original materials by ultra-sonication.

Influence of spectral interferences on the results of quartz determination by infrared spectrometry

Determination of quartz by Fourier transform infrared spectrometry (FTIR) is not specific: the obtained results are influenced by matrix components, some of which cause spectral interference. The aim of the study was to evaluate the effect of dust components responsible for spectral interference with quartz on the results of its determinations, and to develop methods to minimize the effects of interferences. Investigation of interferent effects were conducted using respirable dusts: quartz SRM 1878a, cristobalite SRM 1879a, synthetic amorphous silica (Zeosil) and feldspar, albite and kaolinite. For the study 17 mixtures with quartz and interferents at concentrations from 10 to 90% were prepared. Determinations of quartz were carried out by the KBr disc method. In mixtures of quartz with interferents, the results based on bands 798-779 cm-1 were overestimated by 10-55%, while those based on band 695 cm-1 were closer to the true content of quartz. It was found that the best methods able to decrease the impact of spectral interference are: scaled subtraction of IR spectra of feldspar or kaolinite analysed in nonashed samples, correction curve for kaolinite also investigated in nonashed samples with quartz-content calculation based on band 695 cm-1 in mixtures with cristobalite, amorphous silica or kaolinite in ashed samples. The study indicates the need to identify spectral interferences in dust when determining crystalline silica by FT-IR and to take actions to minimize their impact on the obtained results.

Physical boundaries within aggregates – differences between amorphous, para‐crystalline, and crystalline Structures

The structural properties of finely divided inorganic materials such as metal and metalloid oxides, silicates or carbonates of both synthetic and natural origin are compared by means of electron microscopy and tomography. The structure of the outer surfaces of various compact or compacted agglomerates may suggest some striking similarities between various amorphous silica on the one hand and crystalline titania and alumina on the other however the details of the interior fine structure are completely different. Inside of the crystalline aggregates of, for example, alumina and titania distinct grain boundaries between the inter‐grown primary crystallites exist. Also physical boundaries between different solid phases and crystalline/amorphous transitions in core/shell structures can occur. No physical grain or phase boundaries were found inside of synthetic amorphous silica or para‐crystalline carbon black thus, the aggregate is the constituent particle. Synthetic amorphous silica from different production technologies (fumed/pyrogenic, precipitated, aerogel, gel) may exhibit different macro‐morphology but distinct similarities of the amorphous silica networks. Computational studies on silica and titania underline the stability of constituent particles and aggregates as observed by means of TEM after dispersing the original materials by ultra‐sonication.

Conference Program: 43rd Annual Conference of the European Teratology

Synthetic amorphous silica is a nanostructured material, which is produced and used in a wide variety of technological applications and consumer products. No regulatory prenatal toxicity studies with this substance were reported yet. Therefore, synthetic amorphous silica was tested for prenatal toxicity, according to OECD guideline 414 in Wistar rats following oral (gavage) administration at the dose levels 0, 100, 300, or 1000 mg/kg bw/d from gestation day 6–19. At gestation day 20, all pregnant animals were examined by cesarean section. Numbers of corpora lutea, implantations, resorptions, live and dead fetuses were counted. Fetal and placental weights were determined. Fetuses were examined for external, visceral and skeletal abnormalities. No maternal toxicity was observed at any dose level. Likewise, administration of the test compound did not alter cesarean section parameters and did not influence fetal or placental weights. No compound-related increase in the incidence of malformations or variations was observed in the fetuses. The no observed adverse effect level (NOAEL) was 1000 mg/kg bw/d.

Reduction of Acute Inflammatory Effects of Fumed Silica Nanoparticles in the Lung by Adjusting Silanol Display through Calcination and Metal Doping.

The production of pyrogenic (fumed) silica is increasing worldwide at a 7% annual growth rate, including expanded use in food, pharmaceuticals, and other industrial products. Synthetic amorphous silica, including fumed silica, has been generally recognized as safe for use in food products by the Food and Drug Administration. However, emerging evidence from experimental studies now suggests that fumed silica could be hazardous due to its siloxane ring structure, high silanol density, and "string-of-pearl-like" aggregate structure, which could combine to cause membrane disruption, generation of reactive oxygen species, pro-inflammatory effects, and liver fibrosis. Based on this structure-activity analysis (SAA), we investigated whether calcination and rehydration of fumed silica changes its hazard potential in the lung due to an effect on silanol density display. This analysis demonstrated that the accompanying change in surface reactivity could indeed impact cytokine production in macrophages and acute inflammation in the lung, in a manner that is dependent on siloxane ring reconstruction. Confirmation of this SAA in vivo, prompted us to consider safer design of fumed silica properties by titanium and aluminum doping (0-7%), using flame spray pyrolysis. Detailed characterization revealed that increased Ti and Al doping could reduce surface silanol density and expression of three-membered siloxane rings, leading to dose-dependent reduction in hydroxyl radical generation, membrane perturbation, potassium efflux, NLRP3 inflammasome activation, and cytotoxicity in THP-1 cells. The reduction of NLRP3 inflammasome activation was also confirmed in bone-marrow-derived macrophages. Ti doping, and to a lesser extent Al doping, also ameliorated acute pulmonary inflammation, demonstrating the possibility of a safer design approach for fumed silica, should that be required for specific use circumstances.

Prenatal toxicity of synthetic amorphous silica nanomaterial in rats

Synthetic amorphous silica is a nanostructured material, which is produced and used in a wide variety of technological applications and consumer products. No regulatory prenatal toxicity studies with this substance were reported yet. Therefore, synthetic amorphous silica was tested for prenatal toxicity, according to OECD guideline 414 in Wistar rats following oral (gavage) administration at the dose levels 0, 100, 300, or 1000mg/kg bw/d from gestation day 6-19. At gestation day 20, all pregnant animals were examined by cesarean section. Numbers of corpora lutea, implantations, resorptions, live and dead fetuses were counted. Fetal and placental weights were determined. Fetuses were examined for external, visceral and skeletal abnormalities. No maternal toxicity was observed at any dose level. Likewise, administration of the test compound did not alter cesarean section parameters and did not influence fetal or placental weights. No compound-related increase in the incidence of malformations or variations was observed in the fetuses. The no observed adverse effect level (NOAEL) was 1000mg/kg bw/d.

Oral two-generation reproduction toxicity study with NM-200 synthetic amorphous silica in Wistar rats.

Synthetic amorphous silica (SAS) like NM-200 is used in a wide variety of technological applications and consumer products. Although SAS has been widely investigated the available reproductive toxicity studies are old and do not cover all requirements of current OECD Guidelines. As part of a CEFIC-LRI project, NM-200 was tested in a two-generation reproduction toxicity study according to OECD guideline 416. Male and female rats were treated by oral gavage with NM-200 at dose levels of 0, 100, 300 and 1000mg/kg bw/day for two generations. Body weight and food consumption were measured throughout the study. Reproductive and developmental parameters were measured and at sacrifice (reproductive) organs and tissues were sampled for histopathological analysis. Oral administration of NM-200 up to 1000mg/kg bw/day had no adverse effects on the reproductive performance of rats or on the growth and development of the offspring into adulthood for two consecutive generations. The NOAEL was 1000mg/kg body weight per day.

Genotoxicity of synthetic amorphous silica nanoparticles in rats following short-term exposure. Part 1: oral route.

Synthetic amorphous silica (SAS) in its nanosized form is now used in food applications although the potential risks for human health have not been evaluated. In this study, genotoxicity and oxidative DNA damage of two pyrogenic (NM-202 and 203) and two precipitated (NM-200 and -201) nanosized SAS were investigated in vivo in rats following oral exposure. Male Sprague Dawley rats were exposed to 5, 10, or 20 mg/kg b.w./day for three days by gavage. DNA strand breaks and oxidative DNA damage were investigated in seven tissues (blood, bone marrow from femur, liver, spleen, kidney, duodenum, and colon) with the alkaline and the (Fpg)-modified comet assays, respectively. Concomitantly, chromosomal damage was investigated in bone marrow and in colon with the micronucleus assay. Additionally, malondialdehyde (MDA), a lipid peroxidation marker, was measured in plasma. When required, a histopathological examination was also conducted. The results showed neither obvious DNA strand breaks nor oxidative damage with the comet assay, irrespective of the dose and the organ investigated. Similarly, no increases in chromosome damage in bone marrow or lipid peroxidation in plasma were detected. However, although the response was not dose-dependent, a weak increase in the percentage of micronucleated cells was observed in the colon of rats treated with the two pyrogenic SAS at the lowest dose (5 mg/kg b.w./day). Additional data are required to confirm this result, considering in particular, the role of agglomeration/aggregation of SAS NMs in their uptake by intestinal cells.

Genotoxicity of synthetic amorphous silica nanoparticles in rats following short-term exposure. Part 2: intratracheal instillation and intravenous injection.

Synthetic amorphous silica nanomaterials (SAS) are extensively used in food and tire industries. In many industrial processes, SAS may become aerosolized and lead to occupational exposure of workers through inhalation in particular. However, little is known about the in vivo genotoxicity of these particulate materials. To gain insight into the toxicological properties of four SAS (NM-200, NM-201, NM-202, and NM-203), rats are treated with three consecutive intratracheal instillations of 3, 6, or 12 mg/kg of SAS at 48, 24, and 3 hrs prior to tissue collection (cumulative doses of 9, 18, and 36 mg/kg). Deoxyribonucleic acid (DNA) damage was assessed using erythrocyte micronucleus test and the standard and Fpg-modified comet assays on cells from bronchoalveolar lavage fluid (BALF), lung, blood, spleen, liver, bone marrow, and kidney. Although all of the SAS caused increased dose-dependent changes in lung inflammation as demonstrated by BALF neutrophilia, they did not induce any significant DNA damage. As the amount of SAS reaching the blood stream and subsequently the internal organs is probably to be low following intratracheal instillation, an additional experiment was performed with NM-203. Rats received three consecutive intravenous injections of 5, 10, or 20 mg/kg of SAS at 48, 24, and 3 hrs prior to tissue collection. Despite the hepatotoxicity, thrombocytopenia, and even animal death induced by this nanomaterial, no significant increase in DNA damage or micronucleus frequency was observed in SAS-exposed animals. It was concluded that under experimental conditions, SAS induced obvious toxic effects but did cause any genotoxicity following intratracheal instillation and intravenous injection.

In vivo genotoxic effects of four different nano-sizes forms of silica nanoparticles in Drosophila melanogaster

Although the use of synthetic amorphous silica (SAS) is steady increasing, scarce information exists on its potential health risk. In particular few and conflictive data exist on its genotoxicity. To fill in this gap we have used Drosophila melanogaster as in vivo model test organism to detect the genotoxic activity of different SAS with different primary sizes (6, 15, 30 and 55nm). The wing-spot assay and the comet assay in larvae haemocytes were used, and the obtained results were compared with those obtained with the microparticulated form (silicon dioxide). All compounds were administered to third instar larvae at concentrations ranging from 0.1 to 10mM. No significant increases in the frequencies of mutant spots were observed in the wing-spot assay with any of the tested compounds. On the other hand, significant dose-dependent increases in the levels of primary DNA damage, measured by the comet assay, were observed for all the SAS evaluated but mainly when high doses (5 and 10mM) were used. These in vivo results contribute to increase the database dealing with the potential genotoxic risk associated to SAS nanoparticles exposure.

Characterization of Synthetic Amorphous Silica (SAS) Used in the Ceramics Industry

Silica (SiO2) is one of the most important inputs for the food, pharmaceutics, polymer composite, and ink manufacturing industries. In ceramic materials, fine silica particles are widely used as a packing and sintering aid and to produce other raw materials like mullite (3Al2O3·2SiO2) and silicon carbide (SiC). As most of the silica sources found in nature have relatively low purity and nonhomogeneous properties, use of synthetic grades of silica is necessary in applications such as refractories and technical ceramics that require better control of product composition and microstructure. This paper describes a systematic comparison of four grades of synthetic amorphous silica (SAS) used in technical ceramics. The evaluated SAS materials were formulated by different methods (sodium silicate precipitation, SiCl4 pyrolysis, extraction from rice husks, and physical deposition of silicon vapour). Differences in the physicochemical and thermal and microstructural characterization of each material are related to the principles and techniques involved in their manufacture. The study verified that synthesis conditions strongly influenced the composition and physical properties of the tested SAS samples.

Taste-masked orodispersible tablets of cyclosporine self-nanoemulsion lyophilized with dry silica

The aim of the current study was to investigate the effects of formulation parameters on the disintegration, water absorption and dissolution characteristics of cyclosporine A (CyA) loaded self-emulsifying drug delivery system (SEDDS) in an orodispersible compacts. Its taste masking efficiency was also attempted using an electronic tongue. ODTs were prepared by freeze-drying liquid SEDDS and synthetic amorphous silica suspension followed by direct compression. The influences of the compression forces and super-disintegrant were evaluated to optimize tablet characteristics. The liquid SEDDS was characterized by vesicular size of 48.5 nm, polydispersity index of 0.95, turbidity of 40.7 NTU and rapid CyA dissolution and emulsification rate. The results of micrometric studies demonstrated an acceptable flow, hardness and friability to indicate good mechanical strength of ODTs. The interaction and Pareto charts demonstrated a greater effect of low compression force to increase the porosity and facilitate the disintegration rather than the deformation action of the super-disintegrant. Super-disintegrant level was the most important factor affecting the dissolution parameter followed by the compression force then their interaction effect. Moreover, as indicated by Euclidean distance values and discrimination indices, the unpalatable taste and aversion taste of CyA to stimuli were masked in its optimized SEDDS incorporated ODTs.

Novel insights into the risk assessment of the nanomaterial synthetic amorphous silica, additive E551, in food

This study presents novel insights in the risk assessment of synthetic amorphous silica (SAS) in food. SAS is a nanostructured material consisting of aggregates and agglomerates of primary particles in the nanorange (<100 nm). Depending on the production process, SAS exists in four main forms, and each form comprises various types with different physicochemical characteristics. SAS is widely used in foods as additive E551. The novel insights from other studies relate to low gastrointestinal absorption of SAS that decreases with increasing dose, and the potential for accumulation in tissues with daily consumption. To accommodate these insights, we focused our risk assessment on internal exposure in the target organ (liver). Based on blood and tissue concentrations in time of two different SAS types that were orally and intravenously administered, a kinetic model is developed to estimate the silicon concentration in liver in (1) humans for average-to-worst-case dietary exposure at steady state and (2) rats and mice in key toxicity studies. The estimated liver concentration in humans is at a similar level as the measured or estimated liver concentrations in animal studies in which adverse effects were found. Hence, this assessment suggests that SAS in food may pose a health risk. Yet, for this risk assessment, we had to make assumptions and deal with several sources of uncertainty that make it difficult to draw firm conclusions. Recommendations to fill in the remaining data gaps are discussed. More insight in the health risk of SAS in food is warranted considering the wide applications and these findings.

Uranium incorporation into amorphous silica.

High concentrations of uranium are commonly observed in naturally occurring amorphous silica (including opal) deposits, suggesting that incorporation of U into amorphous silica may represent a natural attenuation mechanism and promising strategy for U remediation. However, the stability of uranium in opaline silicates, determined in part by the binding mechanism for U, is an important factor in its long-term fate. U may bind directly to the opaline silicate matrix, or to materials such as iron (hydr)oxides that are subsequently occluded within the opal. Here, we examine the coordination environment of U within opaline silica to elucidate incorporation mechanisms. Precipitates (with and without ferrihydrite inclusions) were synthesized from U-bearing sodium metasilicate solutions, buffered at pH ∼ 5.6. Natural and synthetic solids were analyzed with X-ray absorption spectroscopy and a suite of other techniques. In synthetic amorphous silica, U was coordinated by silicate in a double corner-sharing coordination geometry (Si at ∼ 3.8-3.9 Å) and a small amount of uranyl and silicate in a bidentate, mononuclear (edge-sharing) coordination (Si at ∼ 3.1-3.2 Å, U at ∼ 3.8-3.9 Å). In iron-bearing synthetic solids, U was adsorbed to iron (hydr)oxide, but the coordination environment also contained silicate in both edge-sharing and corner-sharing coordination. Uranium local coordination in synthetic solids is similar to that of natural U-bearing opals that retain U for millions of years. The stability and extent of U incorporation into opaline and amorphous silica represents a long-term repository for U that may provide an alternative strategy for remediation of U contamination.

0025 Assessment and estimates of exposure to synthetic amorphous silica at five German production plants

ObjectivesSynthetic amorphous silicas (SAS) are nanostructured polymorphs of silicon dioxide. We compared two different exposure assessments.MethodThis study estimated cumulative exposure to inhalable SAS dust in 484 male workers from five...