Synthesis Of Nanocrystals Research Articles

Facile synthesis of Ag2ZrO3 nanocrystals with highly enhanced visible-light photocatalytic activity

Abstract This paper describes the synthesis of Ag2ZrO3 nanocrystals using coprecipitation and microwave-assisted hydrothermal methods. These nanocrystals were characterized by means of X-ray diffraction, micro-Raman spectroscopy, Fourier transform infrared absorption spectroscopy, field emission scanning electron microscopy, and UV–Visible spectroscopy, and their photocatalytic performance for methylene blue degradation under visible-light irradiation has been tested. The X-ray diffraction, micro-Raman spectroscopy, Fourier transform infrared absorption spectroscopy analyses indicate that the Ag2ZrO3 nanocrystals have good crystallinity and no secondary phases. The UV–Visible spectroscopy results showed a variation in the optical band gap values (2.71–2.97 eV) with increasing temperature, which indicates the possible presence of defects in the crystal lattice at a medium range. Field emission scanning electron microscopy images revealed that the nanocrystals have uneven spherical shapes and average particle size around 50–70 nm. The good photocatalytic efficiency can be attributed to defects in the silver zirconate structure capable of forming the active adsorption sites. Finally, we discuss a photocatalytic mechanism to understand the photocatalytic process in cationic dye (methylene blue) degradation in aqueous solution.

Solution-Phase Synthesis of KCl Nanocrystals Templated by PEO-PPO-PEO Triblock Copolymers Micelles.

The current work introduces the synthesis of inorganic salt nano/micro-crystals during the reduction of hydrogen tetrachloroaurate(III) by Pluronic triblock copolymers (P123, PEO20-PPO70-PEO20). The morphologies and component were confirmed using an electron microscope with an electronic differential system (EDS), and the crystal structures were determined with X-ray diffraction (XRD). The morphologies highly depend on the concentrations of Pluronic and pH values. The mean size of the nanocrystal and hollow micro-crystal were controlled typically in the range of 32-150 nm (side length) and 1.4 μm, respectively. Different from the electrospray-ionization (EI) method, a model in which KCl forms a supersaturated solution in the micellar core of Pluronic is used to explain the formation process. This work provides the new insight that inorganic salt nanocrystals could be synthesized with the template of micelles in pure aqueous solutions.

Microwave-assisted Green Synthetic Approach towards Water Dispersible Luminescent PVP-coated Tb3+ and Ce3+/Tb3+-doped KZnF3 Nanocrystals

Background: Perovskite fluoride nanomaterials are an interesting research topic in material science due to their exciting properties like high-temperature superconductivity, magnetic behaviour, piezoelectric behaviour, etc. Doping of lanthanide ions into the perovskite fluoride nanomaterials makes them more promising as they have applications from biological label-ling to multicolor optical devices. Objective: This study aimed to carry out the synthesis of perovskite KZnF3 nanocrystals in an eco-friendly environment with the help of a microwave-assisted route in a shorter reaction time and at low temperatures. Moreover, it aimed to make the nanocrystals water dispersible, illuminating brighter photoluminescence, which was achieved by coating nanocrystals surface with poly(N-vi-nyl-2-pyrrolidone) and doping of different lanthanide ions (Ln= Tb3+ and Ce3+/Tb3+) respectively, into the KZnF3 nanocrystals matrix. Methods: The synthesis of nanocrystals was performed in an environment-friendly microwave-assisted way and under green conditions. For example, in the preparation of Tb3+(5mol%)-doped KZnF3 nanocrystals, 0.95 mmol of Zn(NO3)2 and 0.05 mmol of Tb(NO3)3 were dissolved in 8 mL of distilled water. Then, an 8 mL aqueous solution of KF (3 mmol) was added to it. The entire mixture was stirred well for 15 minutes. About 60 mg of PVP was added to the mixture and stirred for another 15 minutes. Then, a microwave reaction vessel was made by transferring the final reaction mixture into it and kept under microwave irradiation at 90°C temperature for 15 minutes. Finally, the product was cooled to room temperature and collected by centrifugation. Results: Both Tb3+(5mol%)-doped and Ce3+(15mol%)/Tb3+(5mol%) co-doped KZnF3 nanocrystals exhibit very strong green photoluminescence. The structural and optical properties of as-obtained nanocrystals were characterized by PXRD, field emission scanning electron microscopy, Fourier infrared spectroscopy, transmission electron microscopy, thermogravimetric analysis, and photoluminescence spectra. Conclusion: The nanocrystals with uniform cubical morphology having ~60 nm sizes were successfully synthesized. The high photoluminescence efficiency, together with the water dispersibility of the nanocrystals, makes the material useful in many fields of optical devices and offers several biological applications. Moreover, this method could be used to make other lanthanide-doped perovskite fluoride nanocrystals.

Elucidating the Role of Reduction Kinetics in the Phase-Controlled Growth on Preformed Nanocrystal Seeds: A Case Study of Ru.

This study demonstrates the crucial role of reduction kinetics in phase-controlled synthesis of noble-metal nanocrystals using Ru nanocrystals as a case study. We found that the reduction kinetics played a more important role than the templating effect from the preformed seed in dictating the crystal structure of the deposited overlayers despite their intertwined effects on successful epitaxial growth. By employing two different polyols, a series of Ru nanocrystals with tunable sizes of 3-7 nm and distinct patterns of crystal phase were synthesized by incorporating different types of Ru seeds. Notably, the use of ethylene glycol and triethylene glycol consistently resulted in the formation of Ru shell in natural hexagonal close-packed (hcp) and metastable face-centered cubic (fcc) phases, respectively, regardless of the size and phase of the seed. Quantitative measurements and theoretical calculations suggested that this trend was a manifestation of the different reduction kinetics associated with the precursor and the chosen polyol, which, in turn, affected the reduction pathway (solution versus surface) and packing sequence of the deposited Ru atoms. This work not only underscores the essential role of reduction kinetics in controlling the packing of atoms and thus the phase taken by Ru nanocrystals but also suggests a potential extension to other noble-metal systems.

NOVEL APPROACH FOR ONE-POT SELF-ASSEMBLED MONOLAYER PREPARATION OF GOLD TIPPED CdSe/CdS NANORODS

In this study, CdSe/CdS nanorods (NRs) were synthesized via hot injection method to perform simultaneous self-assembly studies with gold tip formation on the nanorods. In this new approach, we propose and demonstrate reductant chemical and gold organosol-free synthesis of gold-tipped nanocrystals on the subphase. Instead of gold organosol usage, gold precursor was prepared by addition of gold source into subphase, and photocatalytic reduction of gold on the tip of nanorods was achieved by exciting the samples under UV-light excitation. Reduction of gold nanoparticles on the tip of NRs was also tried by heating effect, which results in nanopillar formation. The optical properties of these nanorods were determined by spectrophotometric measurements, and gold-tipped nanorods were imaged by TEM analysis. This method enables self-assembly of nanorods and following gold tip formation on the subphase, and it can pave the way to prepare well-defined metal-tipped oriented surfaces that can be used for optical and photocatalysis applications.

Sonochemical Synthesis of Indium Nitride Nanoparticles and Photocatalytic Composites with Titania

Indium nitride is an excellent semiconductor that belongs to the group of III nitride materials. Due to its unique properties, it is applied to various optoelectronic applications. However, its low thermal stability makes it difficult to synthesize. The present study introduces the synthesis of indium nitride nanoparticles, using ultrasound power (sonochemistry). The sonochemical method provides a low-cost and rapid technique for nanomaterial synthesis. InN nanoparticles were produced in only 3 h through the sonochemical reaction of InCl3 and LiN3. Xylene was used as a reaction solvent. X-ray powder diffraction (XRD) as well as high-resolution transmission electron microscopy (HRTEM) were adopted for the characterization of the obtained powder. According to our results, ultrasound contributed to the synthesis of InN nanocrystals in a cubic and a hexagonal phase. The obtained InN nanoparticles were further used to decorate titanium dioxide (TiO2) by means of ultrasound. The contribution of InN nanoparticles on the processes of photocatalysis was investigated through the degradation of methylene blue (MB), a typical organic substance acting in place of an environment pollutant. According to the obtained results, InN nanoparticles improved the photocatalytic activity of TiO2 by 41.8% compared with commercial micrometric titania.

Mild Synthesis of Planar PdPtAuAgCuIr Nanocrystals with Granular Edges for Improved Ethanol Electrooxidation

AbstractWe report a mild, one‐pot synthesis of PdPtAuAgCuIr multimetallic nanocrystals with controlled shapes and explore their applications as the electrocatalysts for ethanol electrooxidation in alkaline medium. The success of current synthesis relies on the co‐reduction of six metal precursors in the presence of octadecylammonium chloride and ascorbic acid at an elevated temperature. The resulting products are featured with an in‐plane core‐shell structure, together with the trigonal/hexagonal plate decorated with granular edges. When serving as EOR electrocatalysts, the carbon‐supported PdPtAuAgCuIr nanocrystals exhibit more than five‐fold increase in mass activity as compared to that of commercial Pt/C, as well as improved reaction kinetics and long‐term durability. DFT calculations disclose that the reduced energy barrier renders the Pd‐based multimetallic catalyst in catalytic performance. The present study provides a feasible strategy to create multimetallic nanocrystals with controlled two‐dimensional morphology under ambient conditions, shedding light for rational design over advanced fuel cell catalysts composed of multimetallic alloy.

Sensitive electrochemical sensing of imidacloprid based on mulberry-like gold-graphene quantum dots hybird as electrode material

The rapid synthesis of gold nanocrystal with high catalytic activity is still a great challenge to improve the analytical performance of electrochemical sensors. In this paper, gold-arginine-threonine functionalized graphene quantum dot hybrid (Au-Arg-Thr-GQD) was synthesized by a simple and fast one-step method using Arg-Thr-GQD as reductant, stabilizer and crosslinker. The Au-Arg-Thr-GQD offers mulberry-shaped structure by the interconnection and self-assembly of Arg-Thr-GQD and small-sized Au nanocrystals. The unique structure significantly improves the catalytic activity of hybrid. Au-Arg-Thr-GQD was used as a sensing material for electrochemical analysis of imidacloprid. Under the optimal conditions, the differential pulse voltammetry peak current linearly increased with the increasing of imidacloprid concentration in the range of 0.1–20 μM with the detection limit of 0.011 μM. The proposed imidacloprid sensor shows high selectivity, good stability and reproducibility, and has been successfully applied to the determination of imidacloprid in cabbage and cucumber samples.

Green synthesis of silver and iron nano composites using aqueous extract of zanthoxylum armatum seeds and their application for removal of acid black 234 dye.

Green nanotechnology has gained attraction in recent years due to the growing awareness of the environmental and health risks associated with traditional methods of nanomaterial synthesis. In the present study, nanocomposite (NCs) of silver and Iron were prepared using Zanthoxylum Armatum seeds aqueous extract which acts as a reducing, stabilizing, and capping agent. The synthesized NCs were characterized using UV/Vis Spectroscopy, powder X-ray diffraction (XRD), Scanning Electron Microscopy (SEM), and EDX. The UV/Vis spectroscopy analysis of the NCs revealed the presence of a surface plasmonic resonance band occurring at 420nm. Examination of the NCs through SEM demonstrated that they exhibited a nearly spherical morphology, with an average particle diameter measuring 54.8nm. The crystalline nature of these NCs was verified through X-ray diffraction (XRD), and the calculation of crystallite size using the Scherrer-Debye equation yielded a value of 12.6nm. The adsorption ability of newly synthesized nanocomposites was investigated against Acid Black 234 Dye. The results showed that a 0.5g of NCs dose at pH 4 removed 99.3% of 10mg/L of Acid Black 234 Dye within 60min. Based on the findings of this research, it can be inferred that the that Ag-Fe NCs synthesized from Zanthoxylum Armatum seeds aqueous extract hold significant potential for addressing environmental pollution caused by Acid Black 234 Dye. The NCs were used as adsorbent for the removal of Acid Black 234 dye from the wastewater sample and showed 98% removal of dye from the commercial sample within 60min. In this context, the research highlights that the environmentally friendly synthesis of Ag-Fe nanocrystals (Ag-Fe NCs) using Zanthoxylum Armatum as a mediator offers an efficient and cost-effective solution for mitigating environmental pollution.

Ytterbium femtosecond fiber laser ablation synthesis of silicon nanocrystals in water: Laser frequency and pulse energy dependence

The utilization of femtosecond laser pulses in synthesizing spherical silicon nanocrystals (SiNCs) poses great potential in producing stable nanostructures with chemically pure surfaces and easy-to-manipulate optical properties. In this work, we present an approach that enhances the production and optical quality of surfactant-free spherical SiNCs synthesized in water by ablating silicon wafers with ytterbium fiber femtosecond laser operating at different pulse energies and repetition rates. By further post-synthesis laser treatment of SiNCs suspensions, fragmentation of larger aggregates is observed leading to absorption broadening and absorption-band blueshift. Furthermore, the increase in the repetition rate, from 1 to 500 kHz, of laser pulses having energies of 20 and 240 μJ leads to a decrease in the Si wafer ablation efficiency from 35 to 1.15 pg/pulse; and from 440 to 5.2 pg/pulse, respectively. Using laser pulses with energy of 240 μJ and a repetition rate of 50 kHz results in maximum SiNCs productivity of 33 mg/h. The dependence of the nanostructures's size and ablation efficiency on the pulse energy and repetition rate is attributed to thermal effects on the Si/water interface and within the water layer illuminated by the strong laser radiation.

Heterogeneous Coprecipitation of Nanocrystals with Metals on Substrates.

ConspectusThe heterogeneous coprecipitation of nanocrystals with metals on substrates plays a significant role in both natural and engineered systems. Due to the small dimensions and thereby the large specific surface area, nanocrystal coprecipitation with metals, which is ubiquitous in natural settings, exerts drastic effects on the biogeochemical cycling of metals on the earth's crust. Meanwhile, the controlled synthesis of nanocrystals with metal doping to achieve tunable size/composition enables their broad applications as adsorbents and catalysts in many engineered settings. Despite their importance, complex interactions among aqueous ions/polymers, nanocrystals, substrates, and metals are far from being well-understood, leaving the controlling mechanisms for nanocrystal formation with metals on substrates uncovered.In this Account, we discuss our systematic investigation over the past 10 years of the heterogeneous formation of representative nanocrystals with metals on typical substrates. We chose Fe(OH)3 and BaSO4 as representative nanocrystals. Mechanisms for varied metal coprecipitation were also investigated for both types of nanocrystals (i.e., Fe, Al, Cr, Cu, and Pb)(OH)3 and (Ba, Sr)(SO4, SeO4, and SeO3)). Bare SiO2 and Al2O3, as well as those coated with varied organics, were selected as geologically or synthetically representative substrates. Through the integration of state-of-the-art nanoscale interfacial characterization techniques with theoretical calculations, the complex interactions during nanocrystal formation at interfaces were probed and the controlling mechanisms were identified.For BaSO4 and Fe(OH)3 formation on substrates, the local supersaturation levels near substrates were controlled by Ba2+ adsorption and the electrostatic attraction of Fe(OH)3 monomer/polymer to substrates, respectively. Meanwhile, substrate hydrophobicity controlled the interfacial energy for the nucleation of both nanocrystals on (in)organic substrates. Metal ions' (i.e., Cr/Al/Cu/Pb) hydrolysis constants and substrates' dielectric constants controlled metal ion adsorption onto substrates, which altered the surface charges of substrates, thus controlling heterogeneous Fe(OH)3 nanocrystal formation on substrates by electrostatic interactions. The sizes and compositions of heterogeneous (Fe, Cr)(OH)3 and (Ba, Sr)(SO4, SeO4, SeO3) formed on substrates were found to be distinct from those of homogeneous precipitates formed in solution. The substrate (de)protonation could alter the local solution's pH and the substrates' surface charge; substrates could also adsorb cations, affecting local Fe/Cr/Ba/Sr ion concentrations at solid-water interfaces, thus controlling the amount/size/composition of nanocrystals by tuning their nucleation/growth/deposition on substrates. From slightly supersaturated solution, homogeneous coprecipitates of microsized (Ba, Sr)(SO4, SeO4, SeO3) formed through growth, with little Sr/Se(VI) incorporation due to higher solubilities of SrSO4 and BaSeO4 over BaSO4. While cation enrichment near substrates made the local solution highly supersaturated, nanosized coprecipitates formed on substrates through nucleation, with more Sr/Se(VI) incorporation due to lower interfacial energies of SrSO4 and BaSeO4 over BaSO4. The new insights gained advanced our understanding of the biogeochemical cycling of varied elements at solid-water interfaces and of the controlled synthesis of functional nanocrystals.

Colloidal Synthesis of Hollow Double Perovskite Nanocrystals and Their Applications in X-ray Imaging.

Rare earth-based halide double perovskites are regarded as an emerging class of X-ray scintillation materials. However, the majority of related scintillator applications are still focused on single crystal and powder systems; the application of nanocrystal (NC) scintillators is rarely reported. Here, we present the synthesis of high-purity Cs2NaTbCl6 NCs by an improved hot-injection method. Interestingly, hollow Cs2NaTbCl6 NCs are observed, the monitoring of the growth process indicates that micrometer-sized NaCl is the initial product, and then the NaCl would convert into Cs2NaTbCl6 NCs through the diffusion of Cs+ and Tb3+ into NaCl lattice, and the faster outward diffusion of Na+ results in the formation of hollow NCs. The double perovskite NCs exhibit green light emission, and the photoluminescence intensity can be significantly enhanced through Ce3+ doping. In particular, the Cs2NaTbCl6:5%Ce3+ scintillator exhibits a linear response and a low detection limit of 79.09 nGy/s when exposed to X-rays. Furthermore, a flexible scintillator film for X-ray imaging is prepared by mixing NCs with polymer, showing a high spatial resolution imaging capability of 10 lp/mm. This work provides a new strategy for hollow perovskite NCs and may shed light on the synthesis of related hollow NCs and their applications in X-ray detection.

The 2023 Nobel Prize in Chemistry: Quantum dots

The 2023 Nobel Prize in Chemistry was awarded to Aleksey I. Ekimov (prize share 1/3), Louis E. Brus (prize share 1/3), and Moungi G. Bawendi (prize share 1/3) for groundbreaking inventions in the field of nanotechnology, i.e., for the discovery and synthesis of semiconductor nanocrystals, also termed quantum dots, that exhibit size-dependent physicochemical properties enabled by quantum size effects. This feature article summarizes the main milestones of the discoveries and developments of quantum dots that paved the road to their versatile applications in solid-state lighting, display technology, energy conversion, medical diagnostics, bioimaging, and image-guided surgery.

Design Synthesis of Low-Silica SAPO-34 Nanocrystals by Constructing Isomorphous Core-Shell Structure: An Effective Catalyst for Improving Catalytic Performances in Methanol-to-Olefins Reaction.

It is well known that low-silica SAPO-34, with an extra porosity (meso- and/or macropores) system, affords excellent catalytic performance in the methanol-to-olefins (MTO) reaction, while the direct synthesis of low-silica SAPO-34 with a hierarchical structure is difficult to achieve, principally because the crystal impurities are usually formed under a low silica content in a gel precursor. Herein, low-silica SAPO-34 nanocrystals were successfully fabricated for the first time by constructing an isomorphous core-shell structure in an epitaxial growth manner. In which, low-silica, ultrasmall nanosquare-shaped SAPO-34 crystals with the same growth orientation along the (100) crystal plane compactly grow on the monocrystal SAPO-34 cores. Crucially, the external surface acid properties of the core SAPO-34 with the Si-rich outer layer are effectively modified by the low-silica SAPO-34 shell. Furthermore, the growth process and Si-substitution mechanism of the shell zeolite were comprehensively investigated. It was found that with the prolonged crystallization time, more and more coordinated Si(4Al) and Si(3Al) structures via two substitution mechanisms (SM2 and SM3) are generated in the nanocrystalline SAPO-34 shell, which endow moderate acidity of the core-shell SAPO-34. Compared to the uncoated SAPO-34, the core-shell SAPO-34 performs a longer lifespan and a higher average selectivity of light olefins (ethylene plus propylene) when applied to the MTO reaction, which is attributed to the positive effects of the luxuriant interstitial pores offering a fast diffusion channel and the moderate acid density depressing the hydrogen transfer reaction of light olefins. This work provides new insights into the fabrication of low-silica SAPO-34 nanocrystals, which are based on the rational design of the isomorphous core-shell zeolite.

Size-Controlled Cu3VSe4 Nanocrystals as Cathode Material in Platinum-Free Dye-Sensitized Solar Cells.

In this work, we report the first single-step, size-controlled synthesis of Cu3VSe4 cuboidal nanocrystals, with the longest dimension ranging from 9 to 36 nm, and their use in replacing the platinum counter electrode in dye-sensitized solar cells. Cu3VSe4, a ternary semiconductor from the class of sulvanites, is theoretically predicted to have good hole mobility, making it a promising candidate for charge transport in solar photovoltaic devices. The identity and crystalline purity of the Cu3VSe4 nanocrystals were validated by X-ray powder diffraction (XRD) and Raman spectroscopy. The particle size was determined from the XRD data using the Williamson-Hall equation and was found in agreement with the transmission electron microscopy imaging. Based on the electrochemical activity of the Cu3VSe4 nanocrystals, studied by cyclic voltammetry, the nanomaterials were further employed for fabricating counter electrodes (CEs) in Pt-free dye-sensitized solar cells. The counter electrodes were prepared from Cu3VSe4 nanocrystals as thin films, and the charge transfer kinetics were studied by electrochemical impedance spectroscopy. The work demonstrates that Cu3VSe4 counter electrodes successfully replace platinum in DSSCs. CEs fabricated with the Cu3VSe4 nanocrystals having an average particle size of 31.6 nm outperformed Pt, leading to DSSCs with the highest power conversion efficiency (5.93%) when compared with those fabricated with the Pt CE (5.85%).

Alkylammonium Halides for Phase Regulation and Luminescence Modulation of Cesium Copper Iodide Nanocrystals for Light-Emitting Diodes.

All-inorganic cesium copper halide nanocrystals have attracted extensive attention due to their cost-effectiveness, low toxicity, and rich luminescence properties. However, controlling the synthesis of these nanocrystals to achieve a precise composition and high luminous efficiency remains a challenge that limits their future application. Herein, we report the effect of oleylammonium iodide on the synthesis of copper halide nanocrystals to control the composition and phase and modulate their photoluminescence (PL) quantum yields (QYs). For CsCu2I3, the PL peak is centered at 560 nm with a PLQY of 47.3%, while the PL peak of Cs3Cu2I5 is located at 440 nm with an unprecedently high PLQY of 95.3%. Furthermore, the intermediate-state CsCu2I3/Cs3Cu2I5 heterostructure shows white light emission with a PLQY of 66.4%, chromaticity coordinates of (0.3176, 0.3306), a high color rendering index (CRI) of 90, and a correlated color temperature (CCT) of 6234 K, indicating that it is promising for single-component white-light-emitting applications. The nanocrystals reported in this study have excellent luminescence properties, low toxicity, and superior stability, so they are more suitable for future light-emitting applications.

Size-Controlled Oxide Perovskite Nanocrystal Synthesis: Design, Optimization, and Mechanism Insights

Size-Controlled Oxide Perovskite Nanocrystal Synthesis: Design, Optimization, and Mechanism Insights

One-step synthesis of highly fluorescent perovskite nanocrystals in antisolvent for bioimaging

All inorganic perovskite nanocrystals (CsPbX3 NCs) have excellent optical properties with high quantum yield, size tunable absorption and emission spectra which makes them popular for a wide variety of applications. All the commonly used synthesis techniques, such as hot injection and ligand assisted reprecipitation method (LARP), use ‘good’ solvent such as dimethyl formamide, dimethyl sulfoxide or octadecene to dissolve the precursor salts. The CsPbX3 NCs formation is triggered either by rapid injection of the dissolved precursor salt in hot mixture (hot injection) or by adding a ‘good’ solvent into a ‘poor’ solvent (LARP) that induces crystallization. Here, we present an alternative synthesis of CsPbX3 perovskite nanocrystals in an antisolvent system, instead of a ‘good’ solvent. Crystallization in the antisolvent is induced by adding a trace amount of water, leading to the formation of highly bright CsPbX3 nanocrystals. This method resulted in a maximum photoluminescent quantum yield of ∼91%. Furthermore, these CsPbBr3 NCs can be modified to create core–shell structures with polymers such as silica, in the same pot. Encapsulating the NCs within a protective silica shell resulted in vastly superior water stability compared to the bare NCs. The silica coated CsPbBr3 NCs showed strong fluorescence in water were used to label breast cancer cells, thereby demonstrating its potential as an optical contrast agent for advanced bioimaging applications. Overall, this synthesis approach requires minimal steps and time, and can be carried out in an ambient atmosphere, thereby increasing its versatility and practicality, which is particularly attractive in low-resource settings.

Facile microwave‐assisted hydrothermal synthesis of zinc phosphate nanocrystals as electrode material for high‐rate performance aqueous and non‐aqueous zinc‐ion batteries

AbstractExploring suitable and economically efficient cathode materials for zinc‐ion batteries plays a vital role in combating current challenges and achieving practical applications. Herein, Zn3(PO4)2 nanoparticles with exceptional battery properties were produced via microwave‐assisted hydrothermal synthesis. The synthesis was conducted at different microwave heating times (3, 5, 10, and 15 min) at a fixed temperature of 200°C. The structural properties of synthesized Zn3(PO4)2 were studied via XRD, FESEM‐EDS, and TEM studies, while the electrochemical parameters were evaluated through CV, GCD, and EIS in a standard 3‐electrode system with 1 M KOH as an electrolyte at a room temperature. The electrochemical results show that Zn3(PO4)2 synthesized at 10 min microwave heating time reported the best electrochemical performance with a specific capacity value of 38.90 and 31.89 C/g at a scan rate of 10 mV/s and current density of 1 A/g, respectively. Furthermore, a stability test of the synthesized electrode material reported an excellent cyclability of the electrode with 79% retention of the initial value of its specific capacity after 1000 cycles.

Controlling Phase in Colloidal Synthesis.

A fundamental precept of chemistry is that properties are manifestations of the elements present and their arrangement in space. Controlling the arrangement of atoms in nanocrystals is not well understood in nanocrystal synthesis, especially in the transition metal chalcogenides and pnictides, which have rich phase spaces. This Perspective will cover some of the recent advances and current challenges. The perspective includes introductions to challenges particular to chalcogenide and pnictide chemistry, the often-convoluted roles of bond dissociation energies and mechanisms by which precursors break down, using very organized methods to map the synthetic phase space, a discussion of polytype control, and challenges in characterization, especially for solving novel structures on the nanoscale and time-resolved studies.