Synthesis Of Glasses Research Articles

Crystallization and luminescence properties of stable CsPbBr3 Nanocrystals in Li2B4O7 glass

All-inorganic CsPbX3 (X = Cl, Br, and I) perovskite nanocrystals (NCs), have achieved unprecedented advances in opto-electronic applications. However, issues such as poor stability and the volatility of halides in the preparation process continue to hinder their practical applications. Here, lithium tetraborate (Li2B4O7) was chosen as the glass matrix to prepare CsPbBr3 NCs glasses through traditional melting-quenching and heat treatment processes, effectively reducing the glass synthesis temperature to 940 °C. The heat treatment temperature and duration are examined. The Li2B4O7 glass matrix exhibits a uniform structure and high transmittance and CsPbBr3 NCs precipitated uniformly after heat treatment. Among these glasses, the sample heat-treated at 510 °C for 5 h exhibited an optimal photoluminescence quantum yield of 76.1 % and the narrowest full width at half maximum values of 24 nm. Its photoluminescence intensity maintained 96.6 % of its original value after multiple thermal cycles and thermal shocks, demonstrating the sample's robust thermal stability. Finally, by integrating the CsPbBr3 NCs glass sample with a blue chip in simple device packaging, a green light-emitting diode was successfully fabricated, featuring excellent luminescence stability and a color purity of up to 96.4 %, promising for applications in solid-state lighting and display technologies.

Multifaceted biomedical applications of bismuth oxide-doped bioactive glass: Synthesis challenges, characterization and potential clinical implications

Herewith, the present work reports a facile synthesis method of Bi2O3 doped 70 SiO2.30CaO binary bioactive glass system termed as modified Bi-BG (acronymed as mBi-BG) that indicates successful incorporation of Bi3+ into the silicate glassy network, on prior complex formation of the precursor bismuth nitrate salt with acetyl acetone to address the rapid decomposition rate of precursor bismuth nitrate. The binary bioactive glass composition as above mentioned (70 SiO2.30CaO) is named as BG/Control. The synthesis methodology addresses inherent challenges encountered in traditional sol-gel derived bismuth oxide incorporated bioactive glass (Bi-BG) synthesis wherein yellow coloured bismuth oxide gets separated from the glassy network as confirmed by XRD phase analysis. Next, mBi-BG (modified Bi-BG) was synthesized via modifying the sol gel method by introducing a chelating agent acetyl acetone to stabilize the precursor Bi (NO3)3 salt, and was characterized using XRD, FTIR, FESEM-EDX. TG-DSC and BET isotherm. In vitro bioactivity studies illustrate the formation of hydroxyapatite crystals on mBi-BG surface indicating its potential for bone repair and regeneration. Additionally, mBi-BG exhibits significant effect against Staphylococcus aureus (gram-positive) bacterial strain, highlighting its utility in preventing bacterial infections at surgical sites. Radiographic imaging of mBi-BG reveals excellent radiopacity comparable to human bone, rendering it suitable for image-guided surgeries and fluoroscopic procedures. In summary, mBi-BG emerges as a versatile biomaterial with enhanced bioactivity, antibacterial efficacy and radiopacity, thereby offering novel avenues in medical treatment modalities and patient care.

Heavy metal fluoride glasses: A tutorial review

Heavy metal fluoride glasses are the backbone of modern mid-infrared fiber technology. In the last few years, optical fibers made of fluorozirconate, fluoroaluminate, and fluoroindate glasses have reached the high level of reliability that is required for their widespread use in industrial and medical applications, which explains the rapid growth of this technology. In this tutorial review, the author, who was part of the team that discovered heavy metal fluoride glasses exactly fifty years ago, provides a summary of the glass synthesis process and elucidates the most important physical properties of heavy metal fluoride glasses. Finally, a brief overview of their main application areas is presented.

French nuclear glass synthesis: Focus on liquid waste dissolution kinetics

In France, high-level nuclear wastes are confined in glass using a calcination-vitrification process. The waste can also be vitrified by liquid feeding, which imply to add directly the liquid waste. In this study, we focus on nuclear waste vitrification process by direct liquid feeding in order to decipher the dissolution kinetics of the waste in the molten glass. We propose an experimental and analytical protocol to study the dissolution in the solid glass frit of the liquid waste dried beforehand during the glass melting process. This methodology allows to: i) identify the intermediate reaction phases which formed and dissolved during the process; ii) characterizes the evolution of waste element concentrations in the dried waste as a function of time and temperature on glass obtained after cooling; iii) define kinetic parameters relative to the process of intermediate reaction phases dissolution in the molten glass. The three main intermediate reaction phases formed and dissolved in function of temperature are Ca-REE (Rare Earth Elements)- silicate, Ce- oxide and Zr- oxide. At each temperature step (800 to 1200 °C) the evolution of REE (La, Ce, Nd and Pr) and Zr concentrations in the glass samples obtained after cooling shows a fast increase followed by a stabilization in time, which reflects the fast dissolution of the dried waste in the molten glass, i.e. the fast dissolution of intermediate reaction phases. The molten glass is completely homogeneous at classical synthesis temperature (1200 °C). A parameterization methodology of element concentration evolution as a function of time and temperature is proposed here in order to define the kinetic parameters corresponding to the dried waste dissolution (i.e. concentration at a given time t, maximal concentration at a given temperature, characteristic time and activation energy). The results show that the activation related to the formation and dissolution processes of the intermediate reaction phases, i.e. whether they constitute intermediate compounds formed in temperature by the interaction between the dried waste and the glass frit, and the phases formed without reacting with the glass frit, directly in the dried waste during heat treatment.

Impact of SnO2 doping on spectroscopic characteristics of the SnO2-Na2O-CoO-B2O3 borate glass matrix

The role of tin oxide (SnO2) on the structure-optical features of borate glasses containing low cobalt oxide impurities was studied. The study was carried out on a glass system [x SnO2 – (80-x) B2O3 – 19.5 Na2O – 0.5 CoO]; x = 0.0, 0.5, 1.0, 2.0 and 3.0 mol%. Glass synthesis was carried out by the melt-quench technique. Structure and optical absorption spectroscopy were carried out to explore the optical transitions of Co cations inside the present glass matrix. The obtained results indicate that, with the further addition of SnO2 content, the molar volume decreased from 31.675 cm3/mol to 29.147 cm3/mol. FTIR studies indicated the basic structural units of trigonal BO3 units and BO4 tetrahedra. Herein also, additional contents of tin oxide increased the nonbridging oxygen contents. The reason behind such increment is attributed to the existence of Sn4+ ions in octahedral coordination acting as network modifiers. Optical absorption spectra indicated the existence of Co ions in both Co2+ and Co3+ oxidation states. Moreover, the existence of significant SnO2 concurred with the significant blue shift in the visible absorption bands and red shift in near infrared absorption bands. The positions absorption bands of Co ions were analyzed in the context of ligand field parameters determinations. The obtained data of the crystal field splitting parameter (10Dqt) showed decreased values from 3451 cm−1 to 3364 cm−1 with more SnO2 addition. While Racah parameter B values were also, attained showing increased values from 967 cm−1 to 985 cm−1 when additional SnO2 is added. Further, the impacted role of SnO2 addition on the structural and optical properties of the present glasses was finally estimated.

Synthesis of new synthetic hybrid glasses using metallic nano-particles and rare-earth: Effect of plasmonic diluents

Borophosphate-based glass materials have the potential to revolutionize optical technology because of their outstanding optical properties, long-lasting nature, and cost-effectiveness. The present research addresses the intricate functions of rare earth and metallic nanoparticles (NPs) in borophosphate glass, which have significant potential for optical photonic and medical applications by incorporating Dy3+ ions and Cu NPs. We developed novel hybrid glasses through the melt-quenching technique, which includes the creation of functional groups and the establishment of bonds between P2O5 and B2O3, as confirmed by FTIR and Raman spectroscopy. UV–visible absorption spectra were used to identify the presence of Cu⁺ and Cu (Saeed et al., 2021) [2]⁺ ions and Cu nanoparticles, with the absorption peaks indicating their respective states. Furthermore, the underlying mechanisms of energy transfer in a glass matrix that is co-doped with dysprosium ions (Dy3+) have been studied. The experimental findings of this research not only provide valuable information about the physical properties of borophosphate glass but also emphasize the collaborative relationship between the rare-earth ion and copper nano-powders. The Tauc plot analysis demonstrated a correlation between the concentration of Cu and Dy dopants and a decrease in the energy band gap of the glass. This suggests that these dopants influence the electronic structure of the glass. This study opens up possibilities for creating innovative photonic materials with customized optical attributes.

Synthesis of Bulk-Nucleated Glass–Ceramics and Porous Glass–Ceramic Composites through Utilization of Fly Ashes

Synthesis of Bulk-Nucleated Glass–Ceramics and Porous Glass–Ceramic Composites through Utilization of Fly Ashes

Nearly close-packed atomic arrangements in BaTi2O5 glass

Recent advancements in glass synthesis have led to the creation of novel oxide glasses without tetrahedral corner-sharing networks. Of particular interest are glasses with high atomic packing densities, showcasing improved functionalities. Conventional analyses revealed the presence of not only four-coordinated polyhedra but also five- or six-coordinated polyhedra, which are connected via corner-sharing, edge-sharing, or face-sharing linkages. This study adapted the reduced atomic arrangement (RAA) method to analyze densely packed oxide glasses. The RAA method revealed a near-close-packed structure within a 10 Å range throughout BaTi2O5 glass, with Ba2+ and O2− ions arranged accordingly. Moreover, the structural model derived from relaxing the closest-packed arrangement via molecular dynamics simulations faithfully replicated the X-ray diffraction data. These findings suggest that minor deviations from the closest-packed atomic arrangement can initiate glass formation without corner-sharing tetrahedral networks. The RAA method proves highly effective in understanding glass formation mechanisms in unconventional oxide glasses.

A sol-gel templating route for the synthesis of hierarchical porous calcium phosphate glasses containing zinc

Hierarchical porous phosphate-based glasses (PPG) have great potential in biomedicine. Micropores (pore size <2 nm) increase the surface area, mesopores (pore size 2–50 nm) facilitate the absorption and diffusion of therapeutic ions and molecules making them ideal controlled delivery systems, while macropores (pore size >50 nm) facilitate the movement and diffusion of cells and fluids. In addition, the bioresorbability of PPG allows for their complete solubility in body fluid, alongside simultaneous formation of new tissue. Making PPG via the traditional melt-quenching (MQ) synthesis method used for phosphate-based glasses (PG), is not straightforward. Hence, we present here a route for preparing such glasses using a combination of sol-gel (SG) and templating methods. Hierarchical PPG in the P2O5–CaO–Na2O system with the addition of 1, 3 and 5 mol % of Zn2+ were prepared with pore dimensions ranging from the micro-to the macro scales using Pluronic 123 (P123) as a surfactant. The presence of micropores (0.30–0.46 nm), mesopores (1.75–9.35nm) and macropores (163–207 nm) was assessed via synchrotron-based Small-Angle X-ray Scattering (SAXS), with the presence of the latter two confirmed by Scanning Electron Microscopy (SEM). Structural characterisation performed using 31P solid state magic angle spinning nuclear magnetic resonance (MAS NMR) and Fourier Transform Infrared (FTIR) spectroscopies shows the presence of Q2, Q1 and Q0 phosphate species with a predominance of Q1 species in all compositions. Dissolution studies in deionised (DI) water confirm that controlled release of phosphates, Ca2+, Na+ and Zn2+ is achieved over a period of 7 days. In particular, the release of Zn2+ is proportional to its loading, making its delivery particularly easy to control.

Structural, optical and luminescent properties of Tm3+-doped phosphate oxyfluoride glasses for blue emission solid state devices

In this work, the visible luminescence of P2O5-KF-Al2O3 glasses with Tm2O3 was studied. The Tm3+ ion can have a strong blue emission, which allows the development of LEDs in this color region. This study refers to the synthesis of oxyfluorophosphate glasses, 38P2O5+(50-x)KF+12Al2O3+xTm2O3 (PKAl:Tm), with x = 0.25, 0.50, 0.75, and 1.00 mol%, by the melt-quenching method. The prepared materials showed amorphous characteristics verified by XRD data. The absorption spectra shown six main bands characteristic of Tm3+ ions, from ground state 3H6 to excited levels 3F4, 3H4, 3H5, 3F3,2, 1G4 and 1D2, in which the intensities increased with the concentration of Tm2O3. In the FTIR spectra, it was verified that the profiles of the PKAl samples are similar to glasses based on phosphate systems. The Judd-Ofelt parameters were calculated, where for PKAl glasses the trend was Ω2>Ω4>Ω6. The excitation spectra of PKAl:Tm glasses shown an intense band centered at 358 nm (3H6→1D2). The luminescence spectra with excitation at 358 nm shown two bands at 453 nm (1D2→3F4), and 480 nm (1G4→3H6); the highest emission intensity was observed to the sample doped with 0.75 mol% of Tm2O3. The calculated CIE diagram shown that the doped samples have coordinates close to the primary blue color, which favors the application for the development of blue LEDs and wLEDs. The decay curves for the 1D2 level were fitted by single exponential with lifetime values decreasing with increasing concentration of Tm2O3. These results show that the PKAl:Tm glasses are potential candidates for applications in LEDs.

Cold Pressing of Perovskite-ZIF Glass Interpenetrating Networks with Stable Photoelectric Response.

The protection of lead halide perovskite within a stable matrix normally leads to the loss of semiconducting properties. Here, we report the synthesis of perovskite-ZIF glass interpenetrating networks via a cold pressing method, which allows the advantages of bright photoluminescence, high photoconductivity and environmental stability. This hybrid architecture has provided a novel design strategy for the real-world application of perovskite-based devices.

Unlocking the potential of multicomponent mesoporous bioactive glass nanoparticles: An approach to enhanced ion therapy

This work presents the synthesis and characterization of a multicomponent mesoporous bioactive glass (MMBG) derived from the composition of 58S glass modified with copper, zinc, and boron. Morphological data revealed the presence of spherical particles with an average size of 616 nm and a specific surface area of 295 m2·g−1. X-ray diffractogram analysis confirmed the lack of long-range order in the MMBG, indicating the presence of a disordered vitreous structure characteristic of glass. The structural scenario of the bioactive glass MMBG reveals a characteristic configuration of borosilicate glasses, where the [BO4] polyhedra, along with SiO4 tetrahedra, constitute the backbone of the glassy matrix. Concerning zinc and copper ions, they function similarly to calcium in compensating for the remaining negative charges within the borosilicate network, behaving as typical network-modifying ions. The presence of these heavy ions, coupled with the formation of the borosilicate network in MMBG, led to a 20 % increase in density compared to 58S glass. Additionally, alterations in the chemical composition and structure of MMBG resulted in a reduction in molar volume compared to 58S, indicating a decrease in the volume occupied by one mole of oxygen in the glass matrix, thereby increasing the oxygen packing density. The pH studies reveal that changes in the chemical composition of MMBG did not compromise its chemical reactivity in aqueous environments. The capability of MMBG glass to act as a bioactive agent for ion therapy is evidenced by its ability to deliver Zn and Cu ions, as substantiated by the gradual disappearance of absorption in wavenumber range of 690–470 cm−1, attributed to the vibration of Zn-O and Cu-O bonds. Preliminary in vitro assay for bioactivity in SBF revealed that the formation of apatite layer on the surface of MMBG glass was notably thicker and denser compared to 58S glass. This result highlights the superior bioactive response of the MMBG bioactive glass, indicating its potential as an exceptionally favorable material for various biomedical applications.

Предиктивное моделирование эксплуатационных свойств пеностекла с использованием моделей машинного обучения на основе линейной регрессии

Building construction requires the use of efficient thermal insulation materials such as foam glass in view of energy conservation. The paper considers predictive modelling of the performance properties of foam glass using machine learning models. The paper presents a mathematical description of the additives impact in the charge on the properties of foam glass. Nine charge compositions for foam glass synthesis were developed and their main microstructure parameters were determined. The authors tested the regression models using the JupyterNotebook software environment and the SciKit-Learn library in the Python programming language. The paper analyses the regression equation coefficients and estimates the modelling error. The obtained results confirm the effectiveness of predictive modelling of foam glass performance properties on the basis of linear regression.

Термічне розширення аморфних халькогенідних матеріалів в околі температури склування

The patterns of thermal expansion of chalcogenide materials in the temperature range from room temperature to the beginning of deformation of the samples under the action of the measured force of the dilatometer cell were investigated. Above the glass transition temperature, the coefficient of linear thermal expansion of stabilized samples increases dramatically. For tempered glasses, the course of the temperature dependences of the relative elongation of the samples significantly depends on their thermal history and is of a complex nature. According to dilatometric measurements, the characteristic temperatures of the glass transition interval were determined, a qualitative assessment of structural changes was made depending on the temperature-time regimes of synthesis and annealing of chalcogenide glasses.

Synthesis, optical, and gamma attenuation properties of lead-doped borosilicate glasses

Synthesis, optical, and gamma attenuation properties of lead-doped borosilicate glasses

Synthesis, structural, and optical behavior of erbium-doped silicophosphate glasses for photonics applications.

Erbium-incorporated silicophosphate glasses are very desirable in principal sectors such as photonics, optoelectronics, lasers, and illuminating diodes. The focus of the current investigation has been on determining how the erbium dopant affects the optical, physical, and structural characteristics of the silicophosphate-based glasses. The pure silicophosphate glasses and doped with various contents of erbium were prepared by the sol-gel process in this work. The noncrystalline character of the glasses synthesized was confirmed by the XRD patterns that were obtained. The optical measurement showed that the addition of trivalent erbium ions resulted in an increase in the refractive index of the samples and a decrease in their energy band gap values. It demonstrated the presence of P-O-P linkage stretching vibration modes that were both symmetrical and asymmetrical, P-O in PO4 bending vibration modes, OH group elongating and flexure vibrations, and P-O-H water absorption in glasses. The theoretical values of the optical basicity (Ʌth) increased from 0.465 to 0.472, while the values of the interaction parameter (A) decreased from 0.218 to 0.214 . Silicophosphate glasses doped with trivalent erbium ions show promise as optoelectronic and optical filter system materials.

Unveiling dual crystallization peaks in Zn2P2O7 glass: Insights into stability, nucleation, and growth kinetics

This study reports on the successful synthesis of Zn2P2O7 glass using the conventional melt-quenching method. The state of the material has been investigated using X-ray Diffraction (XRD) and Differential Scanning Calorimetry (DSC), to verify its amorphous and glassy state with the onset of two distinct crystallization peaks. These peaks were indicative of the transition to α-Zn2P2O7 and γ-Zn2P2O7 phases during the annealing process, a finding that was supported by Fourier-transform infrared spectroscopy (FTIR) analysis. This marked the inaugural occasion where the stabilization of both Zn2P2O7 phases from their respective annealed glassy state was achieved. The crystallization kinetics and associated parameters of Zn2P2O7 glass were deeply delved into, with various models including Kissinger, Ozawa, and the Matusita-Sakka approach. The applied models elucidate the mechanisms of growth and nucleation within the glass matrix. This kinetic study provided valuable insights into the crystallization process, revealing that α-Zn2P2O7 is both kinetically and thermally more stable than the γ-phase. However, it is less thermodynamically stable compared to the γ-phase. Besides, the study of phase transformations and crystallization kinetics was enhanced by the analysis of the Avrami index.

Cathodic Deposition‐Assisted Synthesis of Thin Glass MOF Films for High‐Performance Gas Separations

AbstractGlass metal–organic framework (MOF) films can be fabricated from their crystalline counterparts through a melt‐quenching process and are prospective candidates for gas separation because of the elimination of the grain boundaries in crystalline MOF films. However, current techniques are limited to producing glass MOF films with a thickness of tens of micrometers, which leads to ultralow gas permeances. Here, we report a novel cathodic deposition‐assisted synthesis of glass ZIF‐62 films with a thickness as low as ~1 μm. Electrochemical analyses and deposition experiments suggest that the cathodic deposition can lead to pure crystalline ZIF‐62 films with a controllable thickness of ~2 μm to ~15 μm. Accordingly, glass ZIF‐62 films with a thickness of ~1 μm to ~10 μm can be obtained after a thermal treatment. The fabricated defect‐free glass ZIF‐62 film measuring 2 μm in thickness shows a remarkable CO2/N2 and CO2/CH4 selectivity of 31.4 and 33.4, respectively, with a CO2 permeance which is over 30 times higher than the best‐performing glass ZIF‐62 films in literature.

Synthesis of eco-friendly borosilicate glass with Eu3+ dopants: Harnessing recovered silica gel waste for reddish-orange emission materials

In this study, recovered silica gel waste (RSGW) is used as a key raw material to create borosilicate glass doped with Eu3+ ions in a new and environmentally friendly way. The glass compositions were fabricated using the melt quenching method, with different amounts of RSGW and a constant 1.0 mol% Eu3+ doping concentration. The study shows that increasing the doping concentration of RSGW improves the glass density and rigidity while reducing the molar volume, indicating enhanced glass stability. Photoluminescence and X-ray luminescence analyses confirm that the optimal composition with 50 mol% RSGW exhibits the strongest emission. Based on the phonon sideband analysis, the host glasses have a phonon energy of 966.53 cm− 1. An X-ray absorption near-edge structure (XANES) analysis showed that most of the europium ions were in the 3+ oxidation state. The CIE 1931 chromaticity investigation shows the x,y color coordinates at (0.645, 0.351) in the reddish-orange region. To optimize the doping concentration of Eu2O3, it was determined that a fixed concentration of 50 mol% RSGW created the most suitable mixture. Both luminescence emission spectra exhibit strong luminescence, with a peak emission wavelength of 615 nm (⁵D0→⁷F2), confirming concentration quenching in both photoluminescence and x-ray luminescence at a concentration of 1.0 mol%. The study explores potential applications of this novel material in photonics and suggests that this eco-friendly synthesis approach holds great promise for sustainable and efficient production of reddish-orange emission materials.

Rational Design of Nitride Phosphor-In-Glass with Robust Stability and Photoluminescence Performance.

Phosphor-in-glass represents a promising avenue for merging the luminous efficiency of high-quality phosphor and the thermal stability of a glass matrix. Undoubtedly, the glass matrix system and its preparation are pivotal factors in achieving high stability and preserving the original performance of embedded phosphor particles. In contrast to the well-established commercial Y3Al5O12:Ce3+ oxide phosphor, red nitride phosphor, which plays a critical role in high-quality lighting, exhibits greater structural instability during the high-temperature synthesis of inorganic glasses. A telluride glass with a refractive index (RI = 2.15@615 nm) akin to that of nitride phosphor (∼2.19) has been devised, demonstrating high efficiency in photon utilization. The lower glass-transition temperature plays a crucial role in safeguarding phosphor particles against erosion resulting from exposure to high-temperature melts. Phosphor-in-glass retains 93% of the quantum efficiency observed for pure phosphor. The assembled white light-emitting diodes module has precise color tuning capabilities, achieving an optimal color rendering index of 93.7, a luminous efficacy of 80.4 lm/W, and a correlated color temperature of 5850 K. These outcomes hold potential for advancing the realm of inorganic package and high-quality white light illumination.