Synthesis Of Covalent Organic Frameworks Research Articles

Covalent organic frameworks: spotlight on applications in the pharmaceutical arena.

Covalent organic frameworks (COFs) have much potential in the field of analytical separation research due to their distinctive characteristics, including easy modification, low densities, large specific surface areas and permanent porosity. This article provides a historical overview of the synthesis and broad perspectives on the applications of COFs. The use of COF-based membranes in gas separation, water treatment (desalination, heavy metals and dye removal), membrane filtration, photoconduction, sensing and fuel cells is also covered. However, these COFs also demonstrate great promise as solid-phase extraction sorbents and solid-phase microextraction coatings. In addition to various separation applications, this work aims to highlight important advancements in the synthesis of COFs for chiral and isomeric compounds.

Increasing the Accessibility of Internal Catalytic Sites in Covalent Organic Frameworks by Introducing a Bicontinuous Mesostructure.

Introducing continuous mesochannels into covalent organic frameworks (COFs) to increase the accessibility of their inner active sites has remained a major challenge. Here, we report the synthesis of COFs with an ordered bicontinuous mesostructure, via a block copolymer self-assembly-guided nanocasting strategy. Three different mesostructured COFs are synthesized, including two covalent triazine frameworks and one vinylene-linked COF. The new materials are endowed with a hierarchical meso/microporous architecture, in which the mesochannels exhibit an ordered shifted double diamond (SDD) topology. The hierarchically porous structure can enable efficient hole-electron separation and smooth mass transport to the deep internal of the COFs and consequently high accessibility of their active catalytic sites. Benefiting from this hierarchical structure, these COFs exhibit excellent performance in visible-light-driven catalytic NO removal with a high conversion percentage of up to 51.4 %, placing them one of the top reported NO-elimination photocatalysts. This study represents the first case of introducing a bicontinuous structure into COFs, which opens a new avenue for the synthesis of hierarchically porous COFs and for increasing the utilization degree of their internal active sites.

Downsizing Porphyrin Covalent Organic Framework Particles Using Protected Precursors for Electrocatalytic CO2 Reduction.

Covalent organic frameworks (COFs) are promising electrocatalyst platforms owing to their designability, porosity, and stability. Recently, COFs with various chemical structures are developed as efficient electrochemical CO2 reduction catalysts. However, controlling the morphology of COF catalysts remains a challenge, which can limit their electrocatalytic performance. Especially, while porphyrin COFs show promising catalytic properties, their particle size is mostly large and uncontrolled because of the severe aggregation of crystallites. In this work, a new synthetic methodology for rationally downsized COF catalyst particles is reported, where a tritylated amine is employed as a novel protected precursor for COF synthesis. Trityl protection provides high solubility to a porphyrin precursor, while its deprotection proceeds in situ under typical COF synthesis conditions. Subsequent homogeneous nucleation and colloidal growth yield smaller COF particles than a conventional synthesis, owing to suppressed crystallite aggregation. The downsized COF particles exhibit superior catalytic performance in electrochemical CO2 reduction, with higher CO production rate and faradaic efficiency compared to conventional COF particles. The improved performance is attributed to the higher contact area with a conductive agent. This study reveals particle size as an important factor for the evaluation of COF electrocatalysts and provides a strategy to control it.

Rational Synthesis of Functionalized Covalent Organic Frameworks via Four-Component Reaction.

The construction of function-oriented covalent organic frameworks (COFs) remains a challenge as it requires simultaneous consideration of diversified structures, robust linkage, and tailorable functionalities. Herein, we report the rational synthesis of functionalized COFs via a four-component reaction strategy. Through the four-component Debus-Radziszewski reaction, 11 N-substituted imidazole-based COFs with diversified structures were facilely constructed from readily available building blocks. By forming the N-substituted imidazole linkage, these synthesized COFs displayed ultrastability toward strong acids and base. Moreover, the four components reaction allows the rational synthesis of COFs with tailorable functionalities. As an example, the phosphonate-functionalized COF (LZU-530) was rationally constructed for the efficient adsorption of uranium(VI). The uranium(VI) uptake of LZU-530 reaches up to 95 mg·g-1 in 2 M HNO3, which is the highest uptake of the existing organic porous materials under such harsh conditions. Our results highlight the use of multicomponent reaction for the rational synthesis of robust and functionalized COFs toward targeted applications.

Linker-Guided Growth of Single-Crystal Covalent Organic Frameworks.

The core features of covalent organic frameworks (COFs) are crystallinity and porosity. However, the synthesis of single-crystal COFs with monomers of diverse reactivity and adjustment of their pore structures remain challenging. Here, we show that linkers that can react with a node to form single-crystal COFs can guide other linkers that form either COFs or amorphous polymers with the node to gain single-crystal COFs with mixed components, which are homogeneous on the unit cell scale with controlled ratios. With the linker-guided crystal growth method, we created nine types of single-crystal COFs with up to nine different components, which are more complex than any known crystal. The structure of the crystal adapted approximately to that of the main component, and its pore volume could be expanded up to 8.8%. Different components lead to complex and diverse pore structures and offer the possibilities to gain positive synergies, as exemplified by a bicomponent COF with 2200 and 733% SO2 uptake capacity of that of the two pure-component counterparts at 298 K and 0.002 bar. The selectivity for separation of SO2/CO2 ranges from 1230 to 4247 for flue gas based on ideal adsorbed solution theory, recording porous crystals. The bicomponent COF also exhibits a 1300% retention time of its pure-component counterparts for SO2 in a dynamic column breakthrough experiment for deep desulfurization.

Controlled Microwave-Assisted Synthesis of Covalent Organic Frameworks Opens the Way Toward More Suitable Porous Supercapacitor Electrodes

Controlled Microwave-Assisted Synthesis of Covalent Organic Frameworks Opens the Way Toward More Suitable Porous Supercapacitor Electrodes

A New Porphyrin-based Covalent Organic Framework with High Iodine Capture Capacity and I-doping Enhanced Conductivity.

Covalent organic frameworks (COFs) are porous organic materials with well-defined and uniform structure. The material is an excellent candidate as a solid adsorbent for iodine adsorption. In the present study, we report the synthesis of COF with porphyrin moiety, TF-TA-COF, by solvothermal reaction, which was characterized by XRD, solid-state 13 C NMR, IR, TGA, and nitrogen adsorption-desorption analysis. TF-TA-COF showed a high specific surface area of 443 m2 g-1 , and exhibited good adsorption performance for iodine vapor, with an adsorption capacity of 2.74 g g-1 . XPS and Raman spectrum indicated that a hybrid of physisorption and chemisorption took place between host COF and iodine molecules. The electric properties of iodine-loaded TF-TA-COF were also studied. After doped with iodine, the conductivity of the material increased by more than 5 orders of magnitude. The photoconductivity of I2 -doped COF was also studied and TF-TA-COF showed doping-enhanced photocurrent generation.

Facile synthesis of heteroporous covalent organic frameworks with dual linkages: a “three-in-one” strategy

Covalent organic frameworks (COFs) with dual linkages can combine advantages and properties of two distinct connectors, enabling the development of multifunctional materials. However, due to challenges in simultaneously forming two types of linkages, the synthesis of COFs with dual linkages remains a significant challenge. Herein, we propose a “three-in-one” molecular design strategy for synthesizing COFs with dual linkages (4-amino-4"-(2,2-dioxan-1,3-dioxan-5-yl)-[1,1':3',1"-terphenyl]-5'-yl) boronic acid (ADTB)-COF and (4'-amino-5'-(4-(2,2-dioxan-1,3-dioxan-5-yl)phenyl)-[1,1':3',1'-teroxan]-5-yl) boronic acid (ADPB)-COF through reversible condensation between three distinct functionalization groups on the monomer. Benefitting from the abundant micropores and high surface area, ADPB-COF showed excellent selective adsorption capability of C3H8 over CH4 (174, 298 K/1 bar). The present work introduces a new approach for constructing COFs with dual linkages, which greatly simplifies the synthesis process and provides a novel opportunity to develop functional materials based on COFs with multi-linkages.

Covalent Organic Frameworks: Cutting-Edge Materials for Carbon Dioxide Capture and Water Harvesting from Air.

The implacable rise of carbon dioxide (CO2 ) concentration in the atmosphere and acute water stress are one of the central challenges of our time. Present-day chemistry is strongly inclined towards more sustainable solutions. Covalent organic frameworks (COFs), attributable to their structural designability with atomic precision, functionalizable chemical environment and robust extended architectures, have demonstrated promising performances in CO2 trapping and water harvesting from air. In this Review, we discuss the major developments in this field as well as sketch out the opportunities and shortcomings that remain over large-scale COF synthesis, device engineering, and long-term performance in real environments.

Hierarchically Porous Covalent Organic Frameworks: Synthesis Methods and Applications.

Covalent organic frameworks (COFs) with high porosity have garnered considerable interest for various applications owing to their robust and customizable structure. However, conventional COFs are hindered by their narrow pore size, which poses limitations for applications such as heterogeneous catalysis and guest delivery that typically involve large molecules. The development of hierarchically porous COF (HP-COF), featuring a multi-scale aperture distribution, offers a promising solution by significantly enhancing the diffusion capacity and mass transfer for larger molecules. This review focuses on the recent advances in the synthesis strategies of HP-COF materials, including topological structure design, in-situ templating, monolithic COF synthesis, defect engineering, and crystalline self-transformation. The specific operational principles and affecting factors in the synthesis process are summarized and discussed, along with the applications of HP-COFs in heterogeneous catalysis, toxic component treatment, optoelectronics, and the biomedical field. Overall, this review builds a bridge to understand HP-COFs and provides guidance for further development of them on synthesis strategies and applications.

Tetrazine-Linked Covalent Organic Frameworks With Acid Sensing and Photocatalytic Activity.

The first synthesis and comprehensive characterization of two vinyl tetrazine-linked covalent organic frameworks (COF), TA-COF-1 and TA-COF-2, are reported. These materials exhibit high crystallinity and high specific surface areas of 1323 and 1114 m2 g-1. The COFs demonstrate favorable band positions and narrow band gaps suitable for light-driven applications. These advantages enable TA-COFs to act as reusable metal-free photocatalysts in the arylboronic acids oxidation and light-induced coupling of benzylamines. In addition, these TA-COFs show acid sensing capabilities, exhibiting visible and reversible color changes upon exposure to HClsolution, HCl vapor, and NH3 vapor. Further, the TA-COFs outperform a wide range of previously reported COF photocathodes. The tetrazine linker in the COF skeleton represents a significant advancement in the field of COF synthesis, enhancing the separation efficiency of charge carriers during the photoreaction and contributing to their photocathodic properties. TA-COFs can also degrade 5-nitro-1,2,4-triazol-3-one (NTO), an insensitive explosive present in industrial wastewater, in 20 min in a sunlight-driven photocatalytic process; thus, revealing dual functionality of the protonated TA-COFs as both photodegradation and Brønsted acid catalysts. This pioneering work opens new avenues for harnessing the potential of the tetrazine linker in COF-based materials, facilitating advances in catalysis, sensing, and other related fields.

Atomically dispersed Ni active sites on covalent organic frameworks for heterogeneous metallaphotocatalytic C–N cross-coupling

Covalent organic frameworks (COFs) have been acknowledged as a potential platform for heterogeneous photoredox cross-coupling due to their excellent chemical stability, admirable controllability, and extremely prominent surface area. However, synthesizing COFs with bidentate ligand units and utilizing active sites remain a grand challenge. Herein, we report a promising new family of 2,6-pyridinedicarboxaldehyde-bis-(p-aminophenylimine)-based two-dimensional (2D) COFs (PP-COF) using an amine monomer and classic tri-aldehydes. On this basis, dispersed Ni single-atom sites were immobilized on three-types imine-based bi-coordinated 2D COFs (Ni SAS-PP-COF) as heterogeneous dual photoredox catalysts for photo/Ni dual-catalyzed C–N cross-coupling between aryl bromides and alkyl/sulfo amines. Under solar energy irradiation, PP-COF could absorb light to generate electrons and holes, then the photogenerated electrons are transferred to Ni sites to reduce divalent nickel to monovalent nickel. Monovalent nickel is necessary to drive the nickel catalytic cycle. Due to the increased charge separation and abundant active sites, the state-of-the-art Ni SAS-PP-COFs catalyst achieves excellent catalytic performance in comparison of pristine PP-COF. The heterogeneous Ni SAS-PP-COF catalytic system not only confirms the prospect of COFs as potential photoredox/transition-metal dual catalysts, but also provides in-depth insights into the synthesis of functional COFs toward practical metallaphotocatalytic application.

The development of catalysts and auxiliaries for the synthesis of covalent organic frameworks.

Covalent organic frameworks (COFs) have recently seen significant advancements. Large quantities of structurally & functionally oriented COFs with a wide range of applications, such as gas adsorption, catalysis, separation, and drug delivery, have been explored. Recent achievements in this field are primarily focused on advancing synthetic methodologies, with catalysts playing a crucial role in achieving highly crystalline COF materials, particularly those featuring novel linkages and chemistry. A series of reviews have already been published over the last decade, covering the fundamentals, synthesis, and applications of COFs. However, despite the pivotal role that catalysts and auxiliaries play in forming COF materials and adjusting their properties (e.g., crystallinity, porosity, stability, and morphology), limited attention has been devoted to these essential components. In this Critical Review, we mainly focus on the state-of-the-art progress of catalysts and auxiliaries applied to the synthesis of COFs. The catalysts include four categories: acid catalysts, base catalysts, transition-metal catalysts, and other catalysts. The auxiliaries, such as modulators, oxygen, and surfactants, are discussed as well. This is then followed by the description of several specific applications derived from the utilization of catalysts and auxiliaries. Lastly, a perspective on the major challenges and opportunities associated with catalysts and auxiliaries is provided.

Adsorption of typical dyes in water by sponge based covalent organic frameworks: Pore size and mechanism

This study addressed the ambiguity surrounding the relationship between the pore size of covalent organic frameworks (COFs) and their adsorption capacity and rate. To achieve this, we synthesized COFs with five distinct pore sizes (COF1-COF5) and conducted a comprehensive analysis using kinetic models. Our findings indicated that the adsorption capacity and rate of methyl orange (MO) increased linearly with the pore size of COFs, from 1.25 nm to 2.57 nm. Notably, COF3, with a pore size of 2.57 nm, exhibited the highest adsorption performance for MO, boasting an impressive capacity of 43.07 mg/g. Furthermore, we tackled the challenge of COFs powder recovery by employing a one-pot synthesis method to create SP-COFs, where COFs powder was loaded onto polyurethane sponge. Through rigorous adsorption and analytical experiments, we demonstrated that SP-COF3 achieved rapid recovery while efficiently adsorbing MO, maintaining a high removal efficiency of over 95% even after 8 reuse cycles. The mechanism underlying MO adsorption on SP-COF3 was attributed to electrostatic interaction and hydrogen bonding, with the possibility of π-π interaction also being considered. Overall, this study provides valuable new insights into the tailored synthesis of COFs with specific structures and functionalities, shedding light on the crucial relationship between pore size and adsorption behavior. The development of SP-COFs presents a promising approach to enhance the practical application of COFs as highly efficient adsorbents.

Tannin-assisted interfacial polymerization towards COF membranes for efficient dye separation.

Membrane separation has been shown to have significant potential in addressing the global shortage of clean water. Covalent organic frameworks (COFs) have gained significant attention in the field of membrane separation due to their structural stability and controllable pore size. Here, a modification of polyethersulfone ultrafiltration membranes with TA-assisted COFs is prepared by interfacial polymerization and co-deposition. Intriguingly, in comparison to the conventional COF synthesis method, the interfacial polymerization reaction used n-butanol as the oil-phase monomer to prevent substrate corrosion. More importantly, the TA-assisted co-deposition not only introduces a large number of environmentally friendly hydrophilic groups to enhance the hydrophilicity of the membrane surface, but also the phenolic hydroxyl group contained in TA generates a quinone group upon oxidation. This group can undergo a Michael addition reaction with the amine group, followed by interfacial polymerization to regulate the COFs pore size. Consequently, the optimized membrane exhibited a high permeation flux of 122.03 L m-2 h-1 bar-1 without altering the pore size structure of the original membranes and demonstrated separation performance for various dyes (Mw: 300-1300 g mol-1), with a retention rate of over 98%. Despite multiple filtrations of methyl blue dye, the membrane prepared by simple rinsing still exhibited high retention rates (>98%) with exceptional stability and retention performance. The optimized membrane demonstrated good hydrophilicity and dye separation performance, indicated promising potential for dye separation applications.

Recent progress in the synthesis and applications of covalent organic framework-based composites.

Covalent organic frameworks (COFs) have historically been of interest to researchers in different areas due to their distinctive characteristics, including well-ordered pores, large specific surface area, and structural tunability. In the past few years, as COF synthesis techniques developed, COF-based composites fabricated by integrating COFs and other functional materials including various kinds of metal or metal oxide nanoparticles, ionic liquids, metal-organic frameworks, silica, polymers, enzymes and carbon nanomaterials have emerged as a novel kind of porous hybrid material. Herein, we first provide a thorough summary of advanced strategies for preparing COF-based composites; then, the emerging applications of COF-based composites in diverse fields due to their synergistic effects are systematically highlighted, including analytical chemistry (sensing, extraction, membrane separation, and chromatographic separation) and catalysis. Finally, the current challenges associated with future perspectives of COF-based composites are also briefly discussed to inspire the advancement of more COF-based composites with excellent properties.

A comprehensive review of covalent organic frameworks (COFs) and their derivatives in environmental pollution control.

Covalent organic frameworks (COFs) have gained considerable attention due to their design possibilities as the molecular organic building blocks that can stack in an atomically precise spatial arrangement. Since the inception of COFs in 2005, there has been a continuous expansion in the product range of COFs and their derivatives. This expansion has led to the evolution of three-dimensional structures and various synthetic routes, propelling the field towards large-scale preparation of COFs and their derivatives. This review will offer a holistic analysis and comparison of the spatial structure and synthesis techniques of COFs and their derivatives. The conventional methods of COF synthesis (i.e., ultrasonic chemical, microwave, and solvothermal) are discussed alongside the synthesis strategies of new COFs and their derivatives. Furthermore, the applications of COFs and their derived materials are demonstrated in air, water, and soil pollution management such as gas capture, catalytic conversion, adsorption, and pollutant removal. Finally, this review highlights the current challenges and prospects for large-scale preparation and application of new COFs and the derived materials. In line with the United Nations Sustainable Development Goals (SDGs) and the needs of digital-enabled technologies (AI and machine learning), this review will encompass the future technical trends for COFs in environmental pollution control.

Tailored Design of a Water-Based Nanoreactor Technology for Producing Processable Sub-40Nm 3D COF Nanoparticles at Atmospheric Conditions.

Covalent organic frameworks (COFs) are crystalline materials with intrinsic porosity that offer a wide range of potential applications spanning diverse fields. Yet, the main goal in the COF research area is to achieve the most stable thermodynamic product while simultaneously targeting the desired size and structure crucial for enabling specific functions. While significant progress is made in the synthesis and processing of 2D COFs, the development of processable 3D COF nanocrystals remains challenging. Here, a water-based nanoreactor technology for producing processable sub-40nm 3D COF nanoparticles at ambient conditions is presented. Significantly, this technology not only improves the processability of the synthesized 3D COF, but also unveils exciting possibilities for their utilization in previously unexplored domains, such as nano/microrobotics and biomedicine, which are limited by larger crystallites.

Defects and Disorder in Covalent Organic Frameworks for Advanced Applications

AbstractCrystalline porous organic polymers (CPPs) or covalent organic frameworks (COFs), are composed by light elements linked by covalent bonds. Despite the remarkable progress attained, there are still bottlenecks limiting further development, some of them related to the presence of defects during their synthesis as well as in‐depth understanding of structure of active centers and/or details of the reaction mechanism. Indeed, very often the proposed structures are far from reality because defects and disorders have not been considered. The present review provides an illustrative overview of “defects and disorder in COFs”. These defects include those not only generated during the synthesis and manipulation of COFs, but also lack of crystallinity, stacking disorder and network vacancies. The review starts giving general remarks on organic COFs and their synthetic methods, followed by different methods to play and manage defects, how to minimize them or how to take advantage of them to gain new properties and applications. Selected characterization techniques to quantify defective structures and active sites in COFs are also presented. Finally, the challenges and future opportunities in the field have been summarized in the last section.

Solvent-free mechanochemical synthesis of a sodium disulfonate covalent organic framework for simultaneous highly efficient selective capture and sensitive fluorescence detection of fluoroquinolones

Covalent organic frameworks (COFs) have great adsorption potential due to their tunable pore size and pore architecture as well as tailorable functionalities. However, the green and rapid synthesis of COFs with excellent adsorption properties remains a great challenge. Here, we presented a solvent-free and facile mechanochemical approach for the synthesis of COFs. The as-prepared COF TpBD-(SO3Na)2 containing sulfonate ions exhibited good thermal and chemical stability and can serve as an effective adsorbent for selective capture of fluoroquinolone antibiotics (FQs) benefiting from the ionic interface and abundant negatively charged sites. The maximum adsorption capacities of norfloxacin, enoxacin, and ciprofloxacin were 1709.6, 1661.5, and 1362.8 mg g−1, respectively, which outperformed those of other reported adsorbents. The adsorption mechanism was deeply explored through characterizations combined with density functional theory calculations, proving the synergistic adsorption effects of TpBD-(SO3Na)2 and FQs, including π-π* interactions, electrostatic interactions, and hydrogen bonding. Moreover, a fluorescence detection platform for FQs was developed based on the fluorescence signal of sodium disulfonate TpBD-(SO3Na)2. The limit of detection of norfloxacin was 8 nmol/L with a linear range from 0.03 to 6 μmol/L. This research provides a new strategy for the green synthesis of COFs and expands their application in the synchronous detection and removal of FQs in aquatic environments.