Synthesis Of Bimetallic Nanoparticles Research Articles

Synthesis of bio-based nanolubricant using bimetallic nanoparticles to mitigate the surface deterioration of low carbon steel for metalforming industry

Worldwide industries are drawing their attention to the usage of bio-based substances for their operational purposes. Herein, the bimetallic nanoparticles (Bi-MNPs) were synthesised using a unique combination of Zn–Cr in bio-based mustard oil by green route utilizing wet chemical approach. Synthesised Bi-MNPs (0.12–0.15 wt%) were employed in the synthesis of bimetallic bio-based nanolubricant (Bi-BNL), and the impact was also evaluated on low carbon steel (grade SAE1006). The reduction of Bi-MNPs was carried out by green reducing agents and their stabilisation was confirmed by Fourier transform infrared spectroscopy (FTIR). Whereas, the synthesis of Bi-MNPs was followed by Surface plasma resonance (SPR), average size of Bi-MNPs which was about 60 nm and morphology was established using Scanning electron microscopy (SEM). The efficiency of Bi-BNL and impact of Bi-MNPs on the stability of Bi-BNL was investigated by Dynamic light scattering (DLS), Zeta potential (ZP) and comparative study was carried out with reference lubricant. Interestingly, the kinematic viscosity (KV) values of the lubricants are quite compatible, and have linear relationsip with coefficient of friction which is very suitable to conclude the anti-friction and anti-wearing properties. The KV of bio-based oil was monitored under the criteria of standard test method ASTM D445, and the resultant value was compared with the reference oil. The stability of Bi-BNL and its interaction with low carbon metal sheet was also studied; the outcomes were very impressive due to no rust patches, oil spots and surface deterioration on the metal sheet. The paramount creativity of this research work is the modification of bio-based oil via Bi-MNPs for the synthesis of Bi-BNL that offers the best surface quality of low-carbon steel. Cumulatively, these findings of Bi-BNL could be open up new possibilities to explore the bio-based synthesis of lubricants on a comprehensive scale.

The Interplay between Nucleation and the Rates of Chemical Reduction in the Synthesis of Bimetallic Nanoparticles in Microemulsions: A Computer Study

Monte Carlo simulations were conducted to investigate the interaction between nucleation and the rates of chemical reduction in Au/Ag, Au/Pt and Au/Pd nanoparticles prepared in microemulsions using a one-pot method. The impact of nucleation on final nanostructure depends on the critical nucleus size value: at a high critical nucleus size, nucleation becomes the main factor in determining the final nanostructure, even with a very large difference in reduction rates, as seen in the Au/Pd pair. However, when the critical nucleus size is small, the difference in reduction rates of the two metals becomes the key parameter determining the final nanostructure. Furthermore, the relevance of heteroatomic nucleation on the mechanism of nanoparticle formation depends on the difference between the reduction rates of the two metals. Smaller differences, such as in the Au/Ag or Au/Pt pairs, result in a greater impact of heteroatomic nucleation on the final nanostructure. In contrast, in the Au/Pd pair, heteroatomic nucleation becomes less important due to the low availability of Pd until late stages of synthesis. This study provides deeper insight into the complex mechanisms that govern reactions in microemulsions.

Plant-mediated bimetallic nanoparticles synthesis for catalytic degradation of malachite green

Plant-mediated bimetallic nanoparticles synthesis for catalytic degradation of malachite green

Anticancer, antimicrobial and antioxidant activity of CuO–ZnO bimetallic nanoparticles: green synthesised from Eryngium foetidum leaf extract

In the present study, green synthetic pathway was adapted to synthesize CuO–ZnO bimetallic nanoparticles (BNPs) using Eryngium foetidum leaf extract and their anti-cancer activity against MCF7 breast cancer cell lines, anti-microbial activity and in vitro anti-oxidant activity were evaluated. Various bio-active compounds present in leaf extract were responsible for the reduction of CuO–ZnO NPs from respective Cu2+ and Zn2+ metal precursors. In the present study, the involvement of bio-active compounds present in E. foetidum extract before and after green synthesis of BNPs were evaluated for the first time. Rod-shaped and spherical structural morphology of synthesized BNPs were revealed by using FESEM, TEM, and XRD analysis with particle size ranged from 7 to 23 nm with an average size of 16.49 nm. The distribution of Cu and Zn were confirmed by elemental mapping. The green synthesized CuO–ZnO NPs showed significant cytotoxic effect with the inhibition rate 89.20 ± 0.03% at concentration of 500 μg/mL. Again, good antioxidant activity with IC50; 0.253 mg/mL and antimicrobial activity of BNPs were also evaluated with the increasing order of MIC; E. coli (7.81 μg/mL) < B. subtilis (62.5 μg/mL) < S. aureus (31.25 μg/mL).

Eco-Friendly Synthesis, Characterization, and Biomedical Applications of Biosynthesized Bimetallic Silver-Gold Nanoparticles by Culture Supernatant of Aspergillus niger.

Green synthesis of bimetallic nanoparticles of noble metals is highly desirable in nanomedicine because of their potential use as anticoagulant, thrombolytic and anticancer agents. In this study, it was discovered that the filamentous fungus Aspergillus niger proved effective in producing bimetallic Ag-Au nanoparticles. A. niger culture supernatant was able to produce Ag-AuNPs by reducing the solution of chloroauric acid/silver nitrate (1.0:1.0 mM) within 2 min at 100 °C and pH 8. Experimental Ag-AuNP detection was performed by visually observing the color change to reddish brown. The produced nanoparticles displayed maximal absorbance at 530 nm in UV-vis spectroscopy. According to transmission electron microscopy, most of the nanoparticles were spherical, with a mean diameter of 8-10 nm. The biosynthesis of Ag-AuNPs by A. niger was confirmed by Fourier transform infrared spectroscopy, X-ray diffraction and energy dispersive X-ray analytical techniques. Its zeta potential was discovered to be -34.01 mV. The biosynthesized Ag-AuNPs exhibited effective thrombolytic and antiplatelet aggregation actions by totally preventing and dissolving the blood clot which was verified by microscopic examination, amelioration of blood coagulation assays, and carrageenan-induced tail thrombosis model. The findings verified the effectiveness of biosynthesized Ag-AuNPs as a powerful antitumor agent against HepG2 and A549 cell lines with IC50 values of 15.57 and 27.07 μg/mL, respectively. Crystal violet assay validated the cytopathic effects of Ag-AuNPs on A549 and HepG2 cell lines. Therefore, the produced Ag-AuNPs from A. niger are a promising candidate in the management of thrombosis.

Optimization of Fe/Ni, Fe/Cu bimetallic nanoparticle synthesis process utilizing concentrated Camellia sinensis extract solution and activity evaluation through methylene blue removal reaction

In this study, we introduce a synthesis process of bimetallic nanoparticles (BNPs) Fe/Ni and Fe/Cu utilizing concentrated Camellia sinenis extract that was optimized with a solvent ratio of ethanol/H2O 4/1 (v/v), a metal ratio of 5/1 (w/w), a total polyphenol content (TPC) in the solution of 12.5 g.l−1, pH = 3–4, 25 °C, and the reaction time ranging from 30 min to 50 min. The structural and morphological characteristics of the resulting materials were determined using several techniques, such as scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy-dispersive x-ray spectroscopy (EDX), x-ray diffraction (XRD), and x-ray photoelectron spectroscopy (XPS). The maximum removal efficiency of methylene blue (MB) by BNPs Fe/Ni and Fe/Cu materials was found to be 88.60% and 91.06%, respectively, at a concentration of MB = 25 mg.l−1 and 25 °C. According to the results of the kinetic modeling study, the adsorption process of MB on the two BNPs materials followed second-order kinetics, with the maximum adsorption capacities of MB on Fe/Ni and Fe/Cu BNPs being 26.94 mg.g−1and 28.00 mg.g−1, respectively.

Facile synthesis and surface characterization of platinum and gold bimetallic nanoparticles prepared using hydroalcoholic extract of Bryophyllum Pinnatum: Enhancing efficacy against breast cancer

Primary aim of the proposed study was to explore the green technique for synthesis of bimetallic nanoparticles of platinum and gold metal by employing Bryophyllum pinnatum hydroalcoholic extract (BrPi-P-G-NPs) to explore their potential medicinal properties. Green synthesised bimetallic nanoparticles were characterized by techniques including UV spectroscopy, XRD, FTIR, SEM, TEM, DSC, Particle size and Zeta Potential analysis. Experimental findings confirmed that BrPi-P-G-NPs demonstrate irregular shape, with an average size 34.5 nm. Zeta potential for BrPi and BrPi-P-G-NPs were found to be −8.1 and −24.1 mV, respectively. At a concentration of 75 µg mL−1, the MTT and trypan blue assays of the BrPi-P-G-NPs revealed a cell inhibition rate of 63.54 % and 60.23 %, respectively. In the MCF-7 cell line, the MTT and trypan blue assays recorded IC50 values of 153.54 and 158.04, respectively, for the BrPi-P-G-NPs at the same concentration. Thus, biologically synthesized BrPi-P-G-NPs demonstrated promising anti-cancer properties against human breast cancer cell lines, while showed no signs of toxicity. The enhanced biological activity of BrPi-P-G-NPs can be attributed to their distinctive properties at the nanoscale, as both exhibit lower polydispersity and nanoparticle size, which contribute to increased reactivity and interactions with biological systems. As a result, these BrPi-P-G-NPs nanoparticles synthesized through the biogenic approach using plant extract of Bryophyllum pinnatum have immense potential for a wide range of pharmaceutical applications.

Influence of the parameters governing antagonistic efficacy of bimetallic Au/Ag nanoparticles synthesized by femtosecond laser ablation

The development of novel antagonistic nanoparticles requires information about the factors that influence the antibacterial and anti-biofilm activity. Even though antibacterial studies relating size and shape of metallic nanoparticles were reported earlier we attempted to comprehend the parameters that control the antibacterial and anti-biofilm efficacy of bimetallic Au/Ag nanoparticles prepared by femtosecond laser ablation. The synthesis of bimetallic nanoparticles was done according to our previous article. Absorption spectra and transmission electron microscopy (TEM) validated the buildup of bimetallic nanoparticles. The samples were investigated for antibacterial activity against Gram negative (Pseudomonas aeruginosa) and Gram positive (Bacillus pumilus, Staphylococcus aureus) microorganisms by agar disc diffusion. Anti-biofilm studies were conducted and the biofilm inhibition percentage was calculated. SEM images clearly support the biofilm inhibition occurring to the microorganisms after the treatment with the nanoparticles. It was observed that the antibacterial and anti-biofilm efficacy of the samples increased with the size, concentration, and composition of the nanoparticles. Considering the morphological aspect, the nanoalloy structure showed better activity compared to the core shell structure. Thus it can be concluded that the size, concentration, composition and morphology are key factors that govern the antibacterial and anti-biofilm effectiveness of the synthesized bimetallic Au/Ag nanoparticles. To our knowledge and belief, this is the first work of its kind discussing all the controlling parameters together. This information could be incorporated while synthesizing nanoparticles for medical applications as coating substances.

Mechanical properties, sustained release, and oxygen scavenging properties of nanocomposite films loaded with bimetallic nanoparticles (Fe2O3/TiO2) in extra virgin olive oil.

The aim of this study was the synthesis of bimetallic nanoparticles based on Fe2O3/TiO2 and its use in the poly(lactic acid) (PLA) films as an oxygen scavenger in extra virgin olive oil (EVOO) packaging. Bimetallic nanocomposites were prepared by two different precipitation methods (precipitation with ammonia and sodium hydroxide). The characteristics of bimetallic nanoparticles precipitated with sodium hydroxide (Na-Ti0.01Fe0.048O0.08) and bimetallic nanoparticles precipitated with ammonia (NH-Ti0.01Fe0.022O0.09) were compared. Relative amounts of elements in bimetallic nanocomposites and their morphological characteristics were determined using field emission scanning electron microscopy coupled with energy-dispersive X-ray spectrometer. Porosity volume and surface area of bimetallic nanoparticles were calculated using adsorption-desorption isotherms and the Brunauer-Emmett-Teller method. The formation/characterization of bimetallic nanoparticles and their location in the matrix of PLA-based nanocomposite film was studied using X-ray diffraction and Fourier transform infrared. In nanocomposite films based on PLA, bimetallic nanoparticles lead to better oxidative stability (peroxide value, p-anisidine index, K232, and K270) of the EVOO and oxygen scavenging during storage compared to free nanoparticles. Mechanical properties of nanocomposite films were improved due to bimetallic nanoparticles, which were better for Na-Ti0.01Fe0.048O0.08. In vitro release modeling of the bimetallic nanoparticles in EVOO proved that Fickian diffusion is the dominant mechanism, and the Peleg model was the best description of the release behavior of nanoparticles.

Phytoconstituents of a traditional herb, Verbascum sinaiticum Benth mediated zinc-ferric bimetallic nanoparticle synthesis and bioactive properties for sustainable application

Verbascum sinaiticum Benth, a traditional medicinal plant renowned for its therapeutic properties, was investigated for its phytochemical composition and bioactivity. Aqueous, hexane, and ethanol extracts were qualitatively and quantitatively analyzed for phytochemicals. The hexane extract exhibited tannins, phenolics, and coumarin, while the ethanol extract displayed phenolics, quinones, coumarin, and saponins. Bimetallic nanoarticles were synthesized by ultrasonication method assisted by the plant extracts and characterized by FTIR spectroscopy,X-Ray diffraction methods and SEM analysis.Characterization studies revealed nanoparticle sizes ranging between 63.54 nm and 91.36 nm, while Gas Chromatography-Mass Spectrometry identified bioactive compounds including 9,12,15-octadecatrienoic acid and hexadecenoic acid. The ethanol and aqueous extracts of V. sinaiticum exhibited a significant range of antibacterial activity against tested gram-positive bacterium (Bacillus subtilis) and both gram-negative bacteria and against Streptococcus mutans and both the gram-negative bacteria respectively. The hexane extract of V. sinaiticum exhibited less activity against Bacillus subtilis (5–11 mm) and Escherichia coli (8–12 mm) and has exhibited significant antibacterial activity against Streptococcus mutans (16–23 mm) and Pseudomonas aeruginosa (15–22 mm). The hexane extract of exhibited a significant range of antifungal activity against Candida albicans and Aspergillus niger, with an average zone of inhibition ranging from 7 mm to 18 mm in diameter.The ethanol extract showed a narrow range of antifungal activity against Aspergillus niger. The aqueous extract exhibited potent antioxidant activity with an EC50 value of 42.3 µg/mL. This comprehensive methodology sheds light on the medicinal potential of Verbascum sinaiticum Benth extract mediated bimetallic nanoparticles and provides insights for further research and applications.

Cytotoxic activity of bimetallic Ag@Se green synthesized nanoparticles using Jerusalem Thorn (Parkinsonia aculeata).

Introduction: The process of green synthesis of metal nanoparticles is considered to be eco-friendly and cost-effective. Methods: In this study, bimetallic Ag@Se-P and Ag@Se-S nanoparticles were synthesized successfully using Parkinsonia aculeata aerial parts and seed extracts. The phytochemical contents in P. aculeata aerial parts and seed aqueous extract serve as reducing and stabilizing capping agents without the need for any chemical stabilization additive in the synthesis of bimetallic nanoparticles. Result and Discussion: The obtained results from UV-vis spectrophotometry, scanning electron microscopy (SEM), X-ray powder diffraction (XRD), energy-dispersive X-ray spectroscopy (EDS), transmission electron microscopy (TEM), and Fourier-transform infrared spectroscopy (FT-IR) confirmed the successful synthesis of bimetallic nanoparticles with cluster irregular spherical morphology, crystalline nature, and average particle sizes of 17.65 and 24.36nm for Ag@Se-S and Ag@Se-P, respectively. The cytotoxicity assessment of greenly synthesized nanomaterials using seed and plant extracts showed cell inhibition >50μg/mL. Ag@Se-S and Ag@Se-P seed and plant extracts significantly reduced LPS-induced inflammation, which was assessed by NO and cytokines IL-1β, IL-6, and TNF-α. The mRNA and protein expression levels of phosphoinositide 3 kinase (PI3K) and nuclear factor kappa B (NFkB) were significantly overexpressed in LPS-induced RAW 264.7 cell lines. Ag@Se-S and Ag@Se-P downregulated the expression of PI3K and NFkB in LPS-induced cell models.

Studies on photocatalytic mineralization of organic pesticides by bimetallic Cu-Zn nanoparticles derived from Zingiber officinaleRoscoe (ginger) using green chemistry approach.

Compared to monometallic nanoparticles, bimetallic nanoparticle synthesis and characterization have attracted more attention due to their superior environmental protection properties. In this study, we discuss the preparation and characterization of Cu-Zn bimetallic nanoparticles using Zinger extract, as well as their potential role in photocatalytic degradation of carbendazim, chlorpyrifos, monocrotophos, and cypermethrin. Surface properties were assessed with SEM and TEM, while UV-VIS, XRD, FTIR, and fluorescence spectroscopy were used to characterize the materials. It was observed that higher pH conditions were more conducive to the development of stable Cu-Zn BMNPs with diameters ranging from 60 to 100nm. UV-VIS spectroscopy showed that the Cu-Zn bimetallic nanoparticles photodegraded 53-95% of the pesticides, monocrotophos, chlorpyrifos, and carbendazim during the 24-72-h incubation period. A number of pesticides may be photocatalytically degraded by primary reactive radicals produced by nanoparticles. We propose that the use of bimetallic nanoparticles could be one alternative strategy for pesticide mineralization.

Green Synthesis of Bimetallic Nanoparticles and its Catalytic Activity of Multicomponent Reactions and Antibacterial Activity

AbstractThis present research work focuses on synthesizing Ag−Cu bimetallic nanoparticles utilizing an aqueous extract leaf of Excoecaria agallocha, employing a green synthesis route. The incorporation of silver (Ag) with copper (Cu) induces synergistic effects that enhance reaction kinetics and reduce the multicomponent reaction time. The catalysts synthesized through this environmentally friendly approach were thoroughly characterized using various analytical techniques, including HR‐TEM, XRD, SEM‐EDX, UV‐Vis Spectrophotometry, and FT‐IR. The UV‐visible spectrum displayed a peak at 257 nm, while the FT‐IR spectrum exhibited peaks at 574 cm−1, indicative of bimetallic peak reductions attributed to the influence of plant metabolites. HR‐TEM and XRD revealed the crystalline with (111), (200), (111), (200), and (220) plane values and shapes of BMNPs. Furthermore, the Ag−Cu bimetallic nanoparticles demonstrated outstanding catalytic performance with high product yield, along with notable reusability and recyclability and excellent antimicrobial activity when compared with commercial antibacterial chloramphenicol.

A comprehensive review on biogenic synthesis of bimetallic nanoparticles and their application as catalytic reduction of 4-nitrophenol

A comprehensive review on biogenic synthesis of bimetallic nanoparticles and their application as catalytic reduction of 4-nitrophenol

Fabrication of Au-Ag Bimetallic Nanoparticles Using Pulsed Laser Ablation for Medical Applications: A Review.

In recent years, the synthesis of Au-Ag bimetallic nanoparticles has garnered immense attention due to their potential applications in diverse fields, particularly in the realm of medicine and healthcare. The development of efficient synthesis methods is crucial in harnessing their unique properties for medical applications. Among the synthesis methods, pulsed laser ablation in a liquid environment has emerged as a robust and versatile method for precisely tailoring the synthesis of bimetallic nanoparticles. This manuscript provides an overview of the fundamentals of the pulsed laser ablation in a liquid method, elucidating the critical factors involved. It comprehensively explores the pivotal factors influencing Au-Ag bimetallic nanoparticle synthesis, delving into the material composition, laser parameters, and environmental conditions. Furthermore, this review highlights the promising strides made in antibacterial, photothermal, and diagnostic applications. Despite the remarkable progress, the manuscript also outlines the existing limitations and challenges in this advanced synthesis technique. By providing a thorough examination of the current state of research, this review aims to pave the way for future innovations in the field, driving the development of novel, safe, and effective medical technologies based on Au-Ag bimetallic nanoparticles.

Lemongrass and Lemon Monometallic and Bimetallic Nanoparticles Synthesis and Their Applications

Lemongrass and Lemon Monometallic and Bimetallic Nanoparticles Synthesis and Their Applications

Clove bud extract mediated green synthesis of bimetallic Ag–Fe nanoparticles: Antimicrobial, antioxidant and dye adsorption behavior and mechanistic insights of metal ion reduction

Metal nanoparticle synthesis by metal ion reduction from plant extract has paid immense attention to researchers owing to its low cost, easy synthesis and eco-friendly nature compared to other biological methods. Compared to monometallic nanoparticles, syntheses of bimetallic nanoparticles have great importance due to the possibility of better performance of bimetallic nanoparticles compared to their monometallic counterpart. To explore this possibility, we synthesized bimetallic Ag–Fe nanoparticles of different compositions using aqueous phase co-reduction of Ag+ and Fe3+ metal ions in different ratios by clove (Syzygium aromaticum) flower bud extract. Prepared nanoparticles were characterized by Ultraviolet–visible spectroscopy, powder X-ray diffraction and Scanning Electron Microscopic studies, etc. All bimetallic nanoparticles exhibited multifaceted applications as antimicrobial agents, antioxidants and dye adsorbents. Among the different nanoparticles, bimetallic nanoparticles having Ag–Fe ratio 80:20 exhibit better performance for antimicrobial and dye adsorption activity than mono as well as other bimetallic nanoparticles. As depicted by the powder X-ray diffraction study, the synergy between metals is attributed to the prevention of oxidation of silver to silver oxide in the presence of iron. However, antioxidant activity is directly related to silver content as both silver and silver oxide exhibit almost similar antioxidant properties. The synergy between the metals in bimetallic nanoparticles provided the opportunity to enhance the activity of nanomaterials for various applications along with lowering the cost. Besides the synthesis and activity study of bimetallic nanoparticles, we tried to provide theoretical evidence for the mechanism of metal ion reduction by Eugenol (a major phytochemical present in the clove extract). Structural optimization and thermodynamic parameter calculation using DFT methods suggest that eugenol is preferred to oxidize itself and theoretically calculated reduction potential is ∼ -3.40V at 300K in the gaseous phase.

Exploring Pt-Pd Alloy Nanoparticle Cluster Formation through Conventional Sizing Techniques and Single-Particle Inductively Coupled Plasma-Sector Field Mass Spectrometry.

Accurate characterization of Pt-Pd alloy nanoparticle clusters (NCs) is crucial for understanding their synthesis using Gas-Diffusion Electrocrystallization (GDEx). In this study, we propose a comprehensive approach that integrates conventional sizing techniques-scanning electron microscopy (SEM) and dynamic light scattering (DLS)-with innovative single-particle inductively coupled plasma-sector field mass spectrometry (spICP-SFMS) to investigate Pt-Pd alloy NC formation. SEM and DLS provide insights into morphology and hydrodynamic sizes, while spICP-SFMS elucidates the particle size and distribution of Pt-Pd alloy NCs, offering rapid and orthogonal characterization. The spICP-SFMS approach presented enables detailed characterization of Pt-Pd alloy NCs, which was previously challenging due to the absence of multi-element capabilities in conventional spICP-MS systems. This innovative approach not only enhances our understanding of bimetallic nanoparticle synthesis, but also paves the way for tailoring these materials for specific applications, marking a significant advancement in the field of nanomaterial science.

Nanoparticle embedded cellulosic film: Synergistic influence on antibacterial activity and sustainable agronomic evaluation

The development of biohybrid nanocellulosic film was successfully achieved with synthesis of bimetallic nanoparticles from Vaccinium vitis idaea L. and their hybridization onto cellulose film. The characterization of biohybrid nanocellulosic film showed increased mechanical strength and conductivity. The developed film demonstrated antibacterial activity against medically important pathogens with highest activity was observed against A. baumannii strain and E. coli was less susceptible. Additionally, the film exhibited improved seed germination rate of Oryza Savita and showed catalytic activity in safranin dye degradation. Furthermore, the biohybrid nanocellulosic film extended the shelf life of tomato by preventing microbial spoilage and retained the freshness. Overall, the results obtained in the present investigation are promising with multiplicative properties of the films.

Biosynthesis of Ag@Au bimetallic nanoparticles from Hymenaea courbaril extract (Jatobá) and nonlinear optics properties

Green synthesis of metal nanoparticles (NPMs) has been considered an innovative and sustainable alternative to produce metallic nanoparticles, due to the use of biological structures or parts thereof as reducing and stabilizing agents. This study reports, for the first time, the use of leaf extract from Hymenaea courbaril (Jatobá) as a reducing and stabilizing agent in the synthesis of bimetallic nanoparticles (Ag@AuNPs) in different proportions. Also, the nonlinear optical properties were investigated with continuous laser excitation at 532 nm by Thermal lens spectroscopy and Z-scan technique. The leaf extract is composed of chemical groups such as tannins, flavonoids, and others, confirmed by infrared spectroscopy, responsible for the process of chemical reduction. The UV–VIS spectra confirmed the formation of nanoparticles, through the presence of typical Surface Plasmon Resonance (SPR) bands characteristic of these nanostructures, ranging from 433 nm to 508 nm, depending on the proportion of silver and gold precursors. The nanostructures have an average hydrodynamic radius value of 48 nm and all exhibit a negative surface charge. TEM analysis shows that the Ag@AuNPs were spherical-like shape. The thermo-optical properties were investigated using thermal lens spectroscopy and showed thermal diffusivity values in the range of (8–10) × 10−4 cm2/s, depending on the SPR position. The Z-scan technique shows that the nonlinear refractive index is negative, and we observe the reverse saturable absorption. The results obtained indicate that these nanostructures have potential for nonlinear optics and photothermal applications.