Synergistic Effect Research Articles

Machine learning-assisted dual-atom sites design with interpretable descriptors unifying electrocatalytic reactions

Low-cost, efficient catalyst high-throughput screening is crucial for future renewable energy technology. Interpretable machine learning is a powerful method for accelerating catalyst design by extracting physical meaning but faces huge challenges. This paper describes an interpretable descriptor model to unify activity and selectivity prediction for multiple electrocatalytic reactions (i.e., O2/CO2/N2 reduction and O2 evolution reactions), utilizing only easily accessible intrinsic properties. This descriptor, named ARSC, successfully decouples the atomic property (A), reactant (R), synergistic (S), and coordination effects (C) on the d-band shape of dual-atom sites, which is built upon our developed physically meaningful feature engineering and feature selection/sparsification (PFESS) method. Driven by this descriptor, we can rapidly locate optimal catalysts for various products instead of over 50,000 density functional theory calculations. The model’s universality has been validated by abundant reported works and subsequent experiments, where Co-Co/Ir-Qv3 are identified as optimal bifunctional oxygen reduction and evolution electrocatalysts. This work opens the avenue for intelligent catalyst design in high-dimensional systems linked with physical insights.

MoS2@Fe3O4 prepared by γ-ray in situ reduction for enhancing the fire safety and mechanical properties of EVA/MCA composites

The high flammability of ethylene vinyl acetate copolymers (EVA) limits its important applications in fire safety, and the addition of highly effective flame retardants can improve this deficiency. Melamine cyanurate (MCA) has limited carbon-forming ability and therefore is often combined with other flame retardants to achieve synergistic flame retardant effects and thus improve the flame retardancy of EVA. Therefore, in this study, MoS2@Fe3O4 hybrid materials were synthesized by in-situ growth of molybdenum disulfide (MoS2) and ferric oxide (Fe3O4) and their structures were characterized using various techniques. The hybrids were blended with melamine cyanurate (MCA) into ethylene vinyl acetate copolymer (EVA) by melt blending method to reduce the fire hazard. The EVA composites with 1.0 wt% MoS2@Fe3O4 blends significantly improved the coke residue and limiting oxygen index values to 22.5 % and 23.2 %, while their peak heat release rate, total heat release, and total smoke release were reduced by 62.5 %, 11.7 %, and 35.3 %, respectively, as compared to pure EVA. The results suggest that the use of MoS2@Fe3O4 hybrids in combination with MCA is a promising strategy for the development of advanced flame-retardant materials.

Tribological behavior of Ni-based composite coatings produced by cold spray

The current experiment examined the friction and wear characteristics of Ni-based composite coatings developed by cold spray route. In the developed coatings, fixed concentration of MoS2 (10 wt. %) and varying concentrations of Ag (5, 10, and 15 wt. %) were incorporated to evaluate the lubricating potential of reinforcing elements. The specimens were slid in various working regimes of loads (6, 11, 16, & 21 N) and at a fixed sliding speed of 0.3 m/s under room temperature (RT). According to the investigation, all participating composite coatings have revealed a lower coefficient of friction (COF) and wear rate as the testing load increased from 6 to 16 N, beyond which a reverse trend was recorded till 21 N. However, composite coating with 10 wt. % Ag has shown excellent tribological properties in terms of the lowest COF (0.29) as well as wear rate (4.0 × 10−5 mm3/Nm) at 16 N and 0.3 m/s. The superior tribological characteristics of the aforesaid coating have been explained and well connected to the synergistic effect of solid lubricants (Ag and MoS2) as well as the optimal weight percent of Ag in the creation of tribo layer on the wear track.

Synergistic effects of oxidative and acid stress on bacterial membranes of Escherichia coli and Staphylococcus simulans

Oxidative stress in combination with acid stress has been shown to inactivate a wide spectrum of microorganisms, including multi-resistant bacteria. This occurs e.g. in phagolysosomes or during treatment by cold atmospheric pressure plasmas (CAP) and possibly depends on the cell membrane. We therefore explored the effects of CAP-generated reactive oxygen and nitrogen species (RONS) on bacterial growth inhibition and membranes in neutral and acidic suspensions. We observed that growth inhibition was most efficient when bacteria were treated by a mix of short and long-lived RONS in an acidic environment. Membrane packing was affected mainly upon contact with short-lived RONS, while also acidity strongly modulated packing. Under these conditions, Gram-negative bacteria displayed large potassium release while SYTOX Green influx remained marginal. Growth inhibition of Gram-negative bacteria correlated well with outer membrane (OM) permeabilization that occurred upon contact with short and/or long-lived RONS in synergy with acidity. In Gram-positive bacteria, CAP impaired membrane potential possibly through pore formation upon contact with short-lived RONS while formation of membrane protein hydroperoxides was probably involved in these effects. In summary, our study provides a wide perspective on understanding inactivation mechanisms of bacteria by RONS in combination with acidity.

Theoretical Prediction of Enhanced Hydrogen Evolution Reaction Electrocatalysts Based on Tantalum Phosphide.

Ta-based transition metal catalysts have shown significant catalytic activity for the hydrogen evolution reaction (HER) in recent studies. However, the application of tantalum phosphide (TaP) in the HER has not been documented. Herein, a systematic study of TaP catalysts was performed through density functional theory (DFT). The performance of TaP (004) for the HER was predicted. Thermodynamic analyses of Ta-terminated and P-terminated surfaces with adsorbed hydrogen atoms were conducted, and the HER mechanism on TaP (004) surfaces was carefully investigated. Theoretical results revealed that TaP (004) exhibits excellent HER activity (ΔGH* = 0.0456 eV), and both the Ta-terminated and P-terminated surfaces follow the Volmer-Heyrovsky mechanism under acidic conditions, with the Volmer step being the rate-determining step. A mixed surface strategy was also applied to explore the synergistic effects of Ta-terminated and P-terminated surfaces, which enhanced the HER activity. Additionally, the study screened dopants to assess their impact on the HER activity, revealing that doping with S, Ni, Co, Fe, and Cr could improve the HER performance.

Interpregnancy interval, air pollution, and the risk of low birth weight: a retrospective study in China

BackgroundBoth interpregnancy intervals (IPI) and environmental factors might contribute to low birth weight (LBW). However, the extent to which air pollution influences the effect of IPIs on LBW remains unclear. We aimed to investigate whether IPI and air pollution jointly affect LBW.MethodsA retrospective cohort study was designed in this study. The data of birth records was collected from the Jiangsu Maternal Child Information System, covering January 2020 to June 2021 in Nantong city, China. IPI was defined as the duration between the delivery date for last live birth and date of LMP for the subsequent birth. The maternal exposure to ambient air pollutants during pregnancy—including particulate matter (PM) with an aerodynamic diameter of ≤ 2.5 μm (PM2.5), PM10, ozone (O3), nitrogen dioxide (NO2), sulfur dioxide (SO2) and carbon monoxide (CO)—was estimated using a hybrid kriging-LUR-RF model. A novel air pollution score was proposed, assessing combined exposure to five pollutants (excluding CO) by summing their concentrations, weighted by LBW regression coefficients. Multivariate logistic regression models were used to estimate the effects of IPI, air pollution and their interactions on LBW. Relative excess risk due to interaction (RERI), attributable proportion of interaction (AP) and synergy index (S) were utilized to assess the additive interaction.ResultsAmong 10, 512 singleton live births, the LBW rate was 3.7%. The IPI-LBW risk curve exhibited an L-shaped pattern. The odds ratios (ORs) for LBW for each interquartile range increase in PM2.5, PM10, O3 and the air pollution score were 1.16 (95% CI: 1.01–1.32), 1.30 (1.06–1.59), 1.22 (1.06–1.41), and 1.32 (1.10–1.60) during the entire pregnancy, respectively. An additive interaction between IPI and PM2.5 was noted during the first trimester. Compared to records with normal IPI and low PM2.5 exposure, those with short IPI and high PM2.5 exposure had the highest risk of LBW (relative risk = 3.53, 95% CI: 1.85–6.49, first trimester).ConclusionThe study demonstrates a synergistic effect of interpregnancy interval and air pollution on LBW, indicating that rational birth spacing and air pollution control can jointly improve LBW outcomes.

Synergistic Active Heterostructure Design for Enhanced Two Electron Oxygen Reduction via Chemical and Electrochemical Reconstruction of Heterosulfides

AbstractTransition metal sulfides, particularly heterostructures, represent a promising class of electrocatalysts for two electron oxygen reduction (2e− ORR), however, understanding the dynamic structural evolution of these catalysts during alkaline ORR remains relatively unexplored. Herein, NiS2/In2.77S4 heterostructure was synthesized as a precatalyst and through a series of comprehensive ex situ and in situ characterizations, including X‐ray absorption spectroscopy, Raman spectroscopy, transient photo‐induced voltage measurements, electron energy loss spectroscopy, and spherical aberration‐corrected electron microscopy, it was revealed that nickel/indium (oxy)hydroxides (NiOOH/In(OH)3) could be evolved from the initial NiS2/In2.77S4 via both electrochemical and chemical‐driven methods. The electrochemical‐driven phase featured abundant bridging oxygen‐deficient [NiO6]‐[InO6] units at the interfaces of NiOOH/In(OH)3, facilitating a synergistic effect between active Ni and In sites, thus enabling an enhanced alkaline 2e− ORR capability than that of chemical‐driven process. Remarkably, electrochemically induced NiOOH/In(OH)3 exhibited exceptional performance, achieving H2O2 selectivity of >90 % across the wide potential window (up to 0.4 V) with a peak selectivity of >99 %. Notably, within the three‐electrode flow cell, a current density of 200 mA cm−2 was sustained over 20 h, together with an impressive Faradaic efficiency of ~90 % during the whole cycle process.

Organic waste recycling application increases N availability and mitigates N2O emission without crop yield penalty in the North China Plain

IntroductionAgricultural organic waste recycling can supply nutrients for crop production and partially replace chemical nitrogen fertilizers, which is beneficial for waste management and environmental protection. Nevertheless, comprehensive evaluation of the effects of different organic materials applications on crop yield and the environment is limited.MethodsTherefore, in this study, a comprehensive investigation of the synergistic effects of straw, pig manure, and biogas residue recycling on the wheat (Triticum aestivum L.) and maize (Zea mays L.) systems was carried out in the North China Plain. Field experiments were conducted from 2019 to 2021, comprising five treatments: straw (ST), pig manure (PM), and biogas residue (BR) partially replacing chemical nitrogen fertilizer, sole application of chemical nitrogen fertilizer (CF), and a control with no nitrogen application (WN).Results and discussionThe results showed that organic materials significantly increased soil total nitrogen (3.04%–9.10%) and N recovery efficiency (REN; 42.21%–44.99%), but pig manure was more beneficial in increasing crop yields (3.50%), especially wheat yields (8.72%), and REN was significantly higher than that of the other treatments. Organic materials performed differently in wheat and maize seasons, and wheat yield could be improved by organic materials return. Organic materials stimulated N2O emission in wheat season (4.28%–32.20%), while biogas residue inhibited the N2O emission in maize season (47.47%). The negative effect of straw and biogas residue on yield decreased with increasing years of return, and pig manure continued to contribute to yield. In conclusion, pig manure is the optimal alternative that can increase crop yield, soil N content, and REN without stimulating N2O emissions.

One-step pulsed laser deposition of carbon/metal oxynitride composites for supercapacitor application

Abstract Advanced material composite of nanocarbons and metal-based materials provides a synergistic effect to obtain excellent electrochemical charge-storage performance and other properties. Herein, 3D porous carbon-metal oxynitride nanocomposites with tunable carbon/metal and oxygen/nitrogen ratio are synthesized uniquely by simultaneous ablation from two different targets by single-step pulsed laser deposition at room temperature. Co-ablation of titanium and vanadium nitride targets together with graphite allowed us to synthesize carbon-metal oxynitride porous nanocomposite and exploit them as a binder-free thin film supercapacitor electrode in aqueous electrolyte. We show that the elemental composition ratio and hence the structural properties can be tuned by selecting target configuration and by manipulating the ablation position. We investigate how this tuning capability impacts their charge-storage performances. We anticipate the utilization of as-synthesized various composites in a single PLD production run as next-generation active materials for flexible energy storage and optoelectronic applications.

Biosensor Based on ZIF-67-HRP and MWCNTs Nanocomposite Modified Glass Carbon Electrode for the Detection of Luteolin in Vegetables.

Luteolin has various pharmacological properties, including anti-inflammatory, antioxidant, and antitumor characteristics. Due to its potential value in drugs and functional foods, it is important to develop an efficient method for detecting luteolin. In this work, the poor selectivity of existing luteolin nonenzymatic sensors was solved by translating the enzyme-catalyzed reaction from bulk solution to the surface of a horseradish peroxidase (HRP) modified electrode through an electrocatalytic oxidation process. Here, we modified the surface of a glassy carbon electrode (GCE) with metal-organic frameworks (MOFs; ZIF-67 here, abbreviated as ZIF), functional nanomaterials, and HRP and finally covered it with Nafion (NF). In this case, luteolin acts as a hydrogen donor, and the electrode acts as a hydrogen acceptor; the oxidation reaction occurs on the electrode surface. The use of ZIF-67 ensured the conformational stability of HRP to ensure the selectivity and anti-interference property, and SDS-dispersed multiwalled carbon nanotubes (MWCNTs) enhanced the electrode conductivity. The use of NF avoids shedding of the electrode material during the testing process. A UV-vis spectrophotometer was used to study the selectivity of luteolin by HRP and the compatibility between HRP and ZIF. The materials were characterized and analyzed by scanning electron microscopy and transmission electron microscopy. Due to the synergistic effect of these nanomaterials, the linear range of NF/ZIF-HRP/MWCNTs-SDS/GCE was 1.0 × 10-2 to 6.0 μM, with detection limits of 25.3 nM (S/N = 3). The biosensor showed long-term stability and reproducibility, with a relative standard deviation of 4.2% for the peak current (n = 5). Finally, the biosensor was successfully used to detect luteolin in carrots, celery, and cauliflower.

Association of inflammation/nutrition-based indicators with Parkinson’s disease and mortality

ObjectiveThe study explores the association between inflammation/nutrition-based indicators, Parkinson’s disease (PD), and all-cause mortality among adult participants.MethodsThe analysis included 38,091 participants from National Health and Nutrition Examination Survey (NHANES) 1999–2018. Inflammation/nutrition-based indicators were derived from a comprehensive set of parameters, including neutrophil-albumin ratio (NAR), prognostic nutritional index (PNI), monocyte-albumin ratio (MAR), red cell distribution width-albumin ratio (RAR), hemoglobin, albumin, lymphocyte, and platelet (HALP) score, advanced lung cancer inflammation index (ALI), geriatric nutrition risk index (GNRI), and controlling nutritional status (CONUT) score. PD status was determined based on self-reported anti-parkinsonian medication use. Mortality data were obtained from the National Death Index, linked up to December 30, 2019.ResultsAfter multivariate adjustment, all inflammation/nutrition-based indicators showed significant associations with all-cause mortality among adult participants. The random survival forest emphasized the importance of inflammation/nutrition-based indicators and their components in predicting mortality, with PNI and RAR being the most important indicators for predicting all-cause mortality. Individuals with PD have a significantly higher risk of all-cause mortality compared to those without PD (HR = 1.747 [1.363–2.238], P < 0.001) among adults. Additionally, elevated levels of inflammation/nutrition-based indicators are associated with a higher risk of all-cause mortality among individuals with PD compared to those without PD. This suggested a synergistic effect of PD and elevated levels of inflammatory/nutritional indicators on mortality risk. Specifically, individuals with PD and elevated NAR (HR = 2.066 [1.398–3.052], P < 0.001), MAR (HR = 2.249 [1.612–3.138], P < 0.001), RAR (HR = 1.617 [1.179–2.218], P = 0.003), ALI (HR = 1.763 [1.225–2.537], P = 0.002) and CONUT (HR = 2.221 [1.434–3.440], P < 0.001), and not elevated PNI (HR = 1.771 [1.295–2.423], P < 0.001), HALP (HR = 1.738 [1.242–2.432], P = 0.001), and GNRI (HR = 2.689 [1.898–3.811], P < 0.001) have a substantially higher risk of mortality compared to those without PD.ConclusionInflammation and nutrition status play crucial roles in predicting all-cause mortality among adults, particularly in the context of PD. The study underscores the importance of considering both factors in mortality risk assessment and provides valuable insights for future research and clinical practice.

Synergistic hydration mechanism of steel slag-metakaolin based on ionic dissolution properties combined with industrial CT analysis

Replacing cement with solid waste materials is a key approach to preserving natural resources and mitigating carbon dioxide emissions. In this research, we explored elemental complementation as an eco-friendly and low-carbon approach to develop composite cementitious materials (CCMs) by partially substituting cement with steel slag (SS) and metakaolin (MK), thereby overcoming the low reactivity of SS and facilitating its broader application. We scrutinized the synergistic effects of SS-MK CCMs on parameters such as solubility, water demand, setting time, compressive strength, the formation of hydration products, and microstructure. Employing a suite of analytical techniques, including Inductively Coupled Plasma Optical Emission Spectrometer (ICP-OES), X-ray Diffraction (XRD), Fourier Transform Infrared Spectroscopy (FT-IR), Scanning Electron Microscopy (SEM), measurement of hydration heat, and X-ray computed tomography. The findings revealed that the alkaline environment produced by SS-cement powder promoted the breakdown of Si-O and Al-O bonds within MK, facilitating both the early hydration process and the development of strength.MK compensates for the lack of strength caused by the slow hydration of SS in the early stage, while the SS accelerated a pozzolanic reaction of MK, leading to a 28d compressive strength of 54.77 MPa for the composite, while the 28d strength of SS20 was 39.74 MPa; MK effectively utilized portlandite, enhancing the hydration of SS and increasing the production of calcium silicate hydrate, which optimized the pore structure and improved sphericity. Furthermore, the SS-MK CCMs addressed the issues of f-CaO excess and prolonged setting times in the SS-cement system, while also ameliorating the high calcium demand and reduced fluidity in the MK-cement system. Additionally, its lower cumulative heat release from hydration enhances the material’s volumetric stability. This study presents a strategy for the large-scale application of SS and contributes to the value-added, eco-friendly use of industrial solid wastes.

Molecularly imprinted polymer gel with superior recognition and adsorption capacity for amphenicol antibiotics in food matrices

A molecular-imprinted polymer (MIP) gel with high effective recognition of amphenicol antibiotics was synthesized for the first time based on layered double hydroxide (LDH) as the support and initiator, and functionalized β-cyclodextrin (β-CD) as the functional monomer. The synergistic effect of molecular imprinting recognition and β-CD host-guest affinity enabled MIP gel to exhibit excellent selectivity (imprinted factors: 3.9–9.4) and high adsorption capacity (28.9–75.4 mg g−1) for amphenicol antibiotics. Different adsorption isotherms and kinetics models were followed, suggesting heterogeneous single-layer recognition and chemical adsorption. After 5 cycles of adsorption and desorption, the adsorption capacity of MIP gel retained above 83.6 %, demonstrating favorable reproducibility and stability. Under optimal conditions, the method validation showed a satisfactory limit of detection (5–10 μg L−1), good correlation (r2 > 0.9967), and respectable recovery (82.6–105.3 %). The MIP gel was applied to extract amphenicol antibiotics from food matrices, achieving recoveries in the range of 78.3–104.5 %. Importantly, the recognition mechanism was studied in detail using density functional theory. Therefore, the established method demonstrates high sensitivity and can be applied as a new tactic for detecting amphenicol antibiotics in food matrices.

Enhanced efficacy of combined VEGFR peptide–drug conjugate and anti-PD-1 antibody in treating hepatocellular carcinoma

This study aimed to design a VEGFR-targeting peptide–drug conjugate with the ability to decrease tumor burden and suppress tumor angiogenesis, and to further evaluate the therapeutic effect of anti-PD-1 antibody in HCC therapy. A VEGFR-targeting peptide VEGF125 − 136 (QR) was conjugated with a lytic peptide (KLU) to form a peptide–drug conjugate QR-KLU. And the efficacy of QR-KLU in combination with anti-PD-1 antibody for HCC therapy in vivo and in vitro were evaluated. QR-KLU inhibited the proliferation and migration of mouse HCC cell line (Hepa1–6) cells under normoxic and hypoxic conditions in a dose-dependent manner. In the subcutaneous Hepa1–6 tumor model, QR-KLU combined with the anti-PD-1 antibody substantially inhibited tumor growth, promoted tumor necrosis, and prolonged the survival time of tumor-bearing mice. QR-KLU substantially inhibited hypoxia-induced expression of VEGF, promoted tumor vascular normalization, and increased cluster of differentiation 8+ (CD8+) T cell infiltration in the tumor. In addition, QR-KLU and anti-PD-1 antibody demonstrated a strong synergistic effect in promoting the activation of intratumoral CD8+ T cells, reducing the expression of immune-inhibitory factors, and increasing the expression of immune-stimulatory factors. This study proposed a novel approach for enhancing the efficacy of anti-PD-1 antibody using a VEGFR-targeting peptide–drug conjugate in HCC therapy.

Synergistic Active Heterostructure Design for Enhanced Two Electron Oxygen Reduction via Chemical and Electrochemical Reconstruction of Heterosulfides.

Transition metal sulfides, particularly heterostructures, represent a promising class of electrocatalysts for two electron oxygen reduction (2e- ORR), however, understanding the dynamic structural evolution of these catalysts during alkaline ORR remains relatively unexplored. Herein, NiS2/In2.77S4 heterostructure was synthesized as a precatalyst and through a series of comprehensive ex-situ and in-situ characterizations, including X-ray absorption spectroscopy, Raman spectroscopy, transient photo-induced voltage measurements, electron energy loss spectroscopy, and spherical aberration-corrected electron microscopy, it was revealed that nickel/indium (oxy)hydroxides (NiOOH/In(OH)3) could be evolved from the initial NiS2/In2.77S4 via both electrochemical and chemical-driven methods. The electrochemical-driven phase featured abundant bridging oxygen-deficient [NiO6]-[InO6] units at the interfaces of NiOOH/In(OH)3, facilitating a synergistic effect between active Ni and In sites, thus enabling an enhanced alkaline 2e- ORR capability than that of chemical-driven process. Remarkably, electrochemically induced NiOOH/In(OH)3 exhibited exceptional performance, achieving H2O2 selectivity of >90% across the wide potential window (up to 0.4 V) with a peak selectivity of >99%. Notably, within the flow cell, a current density exceeding 200 mA cm-2 was sustained for over 20 h, together with an impressive Faradaic efficiency of approximately 90% and a hydrogen peroxide production rate surpassing 4 mol g-1 h-1.

Electron-deficient CoO induced charge redistribution on CuCoO-NC nanohybrid for electrocatalytic reduction of nitrate to ammonia

The use of electrochemical tactics to reduce nitrate to the valorized product ammonia has become the hot topic. Recently, the synergistic effect of metal/metal oxide is provided to significantly enhance the electrocatalytic performance of nitrate reduction as opposed to monometallic catalyst. In this work, a reticulated fibre structure with Cu/CoO nanoparticles (CuxCoyO-NC) was prepared for electrocatalytic nitrate reduction (NO3-RR) to ammonia. The optimized catalyst (Cu1Co1O-NC) displayed brilliant performance for NO3-RR with high Faraday efficiency (FE) of 97.9 %, the excellent NH3 yield rate of 0.45 mmol h−1 cm−2, prominent NH3 selectivity of 98.4 % and efficient NO3– conversion of 99.2 % at −0.79 V vs reversible hydrogen electrode (RHE). Besides, Cu1Co1O-NC also exhibits the potential for uranium recovery from simulated wastewater containing nitrate and uranyl ions with a total yield of 508 mg ammonium diuranate after i-t measurement for 6 times. This work not only provides an efficient catalyst for reduction nitrate but also proposes the sustainable method for uranium containing sewage realizing nitrogen cycle.

Atomically dispersed Zn sites on N-doped carbon boosted transesterification of symmetrical organic carbonates with biomass-derived alcohols

Transesterification of symmetrical organic carbonates with alcohols to access the unsymmetrical ones is a highly attractive strategy for upgrading biomass-derived alcohols. Robust, facile-prepared, and cost-effective catalytic materials remain highly desirable for this route. Herein, we designed several Zn-based catalysts (denoted as Zn@C-T, where T represented the pyrolysis temperature) by the pyrolysis of Zn-based coordination polymer at different temperatures. Very interestingly, the prepared Zn@C-900 could efficiently catalyze the transesterification of diethyl carbonate (DEC) with various biomass-derived alcohols to synthesize the corresponding unsymmetrical organic carbonates with high yields (>95 %), resulting from the atomically dispersed ZnNx sites on the N-doped carbon. Notably, good catalytic activity could be obtained at a low temperature of 80 °C, representing the major breakthrough. Detailed investigations indicated that the excellent performance of Zn@C-900 originated mainly from the synergistic effect of Zn (to activate DEC) and N (to activate the alcohols) in the ZnNx sites. This work provided a promising efficient catalyst for low-temperature production of unsymmetrical organic carbonates via transesterification of DEC.

Investigating the Effects of Transition Metals and Activated Carbon on Hydrogenation Characteristics of Severely Deformed ZK60 Processed by High-Energy Ball Milling

The synergic effects of activated carbon and transition metals on the hydrogenation characteristics of commercial ZK60 magnesium alloy were investigated. Severe plastic deformation was performed using equal-channel angular pressing with an internal die angle of 120° and preheating at 300 °C. The ZK60 alloy samples were processed for 12 passes using route BA. The deformed ZK60 alloy powder was blended with activated carbon and different concentrations of transition metals (Ag, Pd, Co, Ti, V, Ti) using high-energy ball milling for 20 h at a speed of 1725 rpm. The amount of hydrogen absorbed and its kinetics were calculated using Sievert’s apparatus at the higher number of cycles at a 300 °C ab/desorption temperature. The microstructure of the powder was analyzed using an X-ray diffractometer and scanning electron microscope. The results indicated that 5 wt% activated carbon presented the maximum hydrogen absorption capacity of 6.2 wt%. The optimal hydrogen absorption capacities were 7.1 wt%, 6.8 wt%, 6.7 wt%, 6.64 wt%, 6.65 wt%, and 7.06 wt% for 0.5 Ag, 0.3 Co, 0.1 Al, 0.5 Pd, 2 Ti, and 0.5 V, respectively. The hydrogen absorption capacities were reduced by 35.21%, 26.47%, 41.79%, 21.68%, 26.31%, and 26.34% after 100 cycles for 5C0.5Ag, 5C0.3Co, 5C0.1Al, 5C0.5Pd, 2Ti, and 5C0.5V, respectively. Hydrogen absorption kinetics were significantly improved so that more than 90% of hydrogen was absorbed within five minutes.

MEK inhibitor trametinib combined with PI3K/mTOR inhibitor BEZ-235 as an effective strategy against NSCLC through impairment of glucose metabolism

The MAPK and PI3K/AKT/mTOR pathways are aberrantly activated in non-small cell lung cancer (NSCLC) patients, but therapeutic efficacy of NSCLC using trametinib (MEK inhibitor) or BEZ-235 (dual PI3K/mTOR inhibitor) alone is still unsatisfactory. Therefore, in this study, we aimed to determine whether the combination of trametinib with BEZ-235 exerted synergistic effects against NSCLC in both in vitro and in vivo models, and we preliminarily explored the effect of this combination therapy on glucose metabolism. Our results showed that trametinib combined with BEZ-235 could better inhibit cell proliferation and colony formation, induce G0/G1 phase arrest and apoptosis, and suppress cell invasion and migration compared with the single agent. The combination index demonstrated that trametinib and BEZ-235 exerted strong synergistic effects. Additionally, trametinib and BEZ-235 exhibited synergistic antitumor effects in vivo. Furthermore, trametinib and BEZ-235 synergistically downregulated the expression of related proteins in the MAPK and PI3K/AKT/mTOR pathways, and decreased glucose consumption and lactic acid production through suppressing the expressions of glucose transporter 1 (GLUT1) and lactate dehydrogenase A (LDHA). These data imply that simultaneous inhibition of the MAPK and PI3K/AKT/mTOR pathways using trametinib combined with BEZ-235 could synergistically impair glucose metabolism, resulting in an obvious synergistic therapeutic effect against NSCLC.

Multifunctional EGCG@ZIF-8 Nanoplatform with Photodynamic Therapy/Chemodynamic Therapy Antibacterial Properties Promotes Infected Wound Healing.

Damaged skin is susceptible to invasion by harmful microorganisms, especially Staphylococcus aureus and Escherichia coli, which can delay healing. Epigallocatechin-3-gallate (EGCG) is a natural compound known for effectively promoting wound healing and its potent anti-inflammatory effects. However, its application is limited due to its susceptibility to oxidation and isomerization, which alter its structure. The use of zeolitic imidazolate framework-8 (ZIF-8) can effectively tackle these issues. This study introduces an oxygen (O2) and hydrogen peroxide (H2O2) self-supplying ZIF-8 nanoplatform designed to enhance the bioavailability of EGCG, combining photodynamic therapy (PDT) and chemodynamic therapy (CDT) to improve antibacterial properties and ultimately accelerate wound healing. For this purpose, EGCG and indocyanine green (ICG), a photosensitizer, were successively integrated into a ZIF-8, and coated with bovine serum albumin (BSA) to enhance biocompatibility. The outer layer of this construct was further modified with manganese dioxide (MnO2) to promote CDT and calcium peroxide (CaO2) to supply H2O2 and O2, resulting in the final nanoplatform EGCG-ICG@ZIF-8/BSA-MnO2/CaO2 (EIZBMC). In in vitro experiments under 808 nm laser, EIZBMC exhibited synergistic antibacterial effects through PDT and CDT. This combination effectively released reactive oxygen species (ROS), which mediated oxidative stress to inhibit the bacteria. Subsequently, in a murine model of wound infection, EIZBMC not only exerted antibacterial effects through PDT and CDT but also alleviated the inflammatory condition and promoted the regeneration of collagen fibers, which led to accelerated wound healing. Overall, this research presents a promising approach to enhancing the therapeutic efficacy of EGCG by leveraging the synergistic antibacterial effects of PDT and CDT. This multifunctional nanoplatform maximizes EGCG's anti-inflammatory properties, offering a potent solution for promoting infected wound healing.