Synchrotron Source Research Articles

Bimodal microstructural characterization of Si powder using X-ray diffraction: the role of peak shape

X-ray diffraction (XRD) characterization of Si powder was carried out using synchrotron and laboratory sources. Microstructural (size-strain) analyses of XRD patterns were carried out using the Rietveld refinement method. Experimentally observed super-Lorentzian shapes of the XRD peaks of Si powder were examined using multimodal profile fitting and bimodal model was found to be adequate. The two components obtained using a bimodal approach are referred as narrow and broad profiles based on their estimated relative peak widths. Peak shapes of crystallite size-dependent parts of narrow and broad profiles were found to be almost Gaussian and Lorentzian in nature, respectively. The simultaneous presence of such peak shapes corresponding to a bimodal microstructure is uncommon in literature. Therefore, in order to explore the role of different natures of XRD peak shapes (size dependent) of the bimodal profiles of Si, detailed microstructural analysis was carried out using the complementary method of whole powder pattern modeling (WPPM) and found to be related to the variance of crystallites' size distribution. Additionally, the effect of instrument resolution (laboratory and synchrotron sources) on the microstructural parameters was also studied. Scanning and transmission electron microscopy were used to characterize the morphology of Si powder and correlate with the microstructural findings of XRD methods.

Radio relics in massive galaxy cluster mergers in the TNG-Cluster simulation

Radio relics are diffuse synchrotron sources in the outskirts of merging galaxy clusters energized by the merger shocks. In this paper, we present an overview of the radio relics in massive cluster mergers identified in the new TNG-Cluster simulation. This is a suite of magnetohydrodynamical cosmological zoom-in simulations of 352 massive galaxy clusters with M500c = 1014.0 − 15.3 M⊙ sampled from a 1 Gpc-sized cosmological box. The simulations were performed using the moving-mesh code AREPO with the galaxy formation model and high numerical resolution consistent with the TNG300 run of the IllustrisTNG series. We post-processed the shock properties obtained from the on-the-fly shock finder to estimate the diffuse radio emission generated by cosmological shockwaves for a total of ∼300 radio relics at redshift z = 0 − 1. TNG-Cluster returned a variety of radio relics with diverse morphologies, encompassing classical examples of double radio relics, single relics, and “inverted” radio relics that are convex to the cluster center. Moreover, the simulated radio relics reproduced both the abundance and statistical relations of observed relics. We find that extremely large radio relics (> 2 Mpc) are predominantly produced in massive cluster mergers with M500c ≳ 8 × 1014 M⊙. This underscores the significance of simulating massive mergers to study giant radio relics similar to those found in observations. We released a library of radio relics from the TNG-Cluster simulation, which will serve as a crucial reference for upcoming next-generation surveys.

Shedding Light on Electrocatalysts: Practical Considerations for Operando Studies with High‐Energy X‐Rays

AbstractOperando studies using high‐energy X‐rays from synchrotron sources are essential for unraveling the complex material transformation that electrocatalysts undergo under operating conditions. This article explores key considerations to perform these experiments and the insights gained from such studies on nanostructured electrocatalysts. Critical factors include optimizing electrochemical performance while obtaining high‐quality X‐ray signals, which often require compromises. The electrochemical operando cell design is crucial, and several different cells are discussed here. Working electrode geometries parallel to the X‐ray beam, probed with a microfocused beam, are emerging as promising solutions for realistic electrochemical performance in operando cells. Careful attention must also be paid to the electrochemical measuring conditions, electrode loading, and beam damage to ensure reliable experiments. When carefully performed and by combining multiple characterization techniques, operando studies with high‐energy X‐rays offer the unique possibility to fully understand the structure of the active electrocatalyst.

Laminography as a tool for imaging large-size samples with high resolution.

Despite the increased brilliance of the new generation synchrotron sources, there is still a challenge with high-resolution scanning of very thick and absorbing samples, such as a whole mouse brain stained with heavy elements, and, extending further, brains of primates. Samples are typically cut into smaller parts, to ensure a sufficient X-ray transmission, and scanned separately. Compared with the standard tomography setup where the sample would be cut into many pillars, the laminographic geometry operates with slab-shaped sections significantly reducing the number of sample parts to be prepared, the cutting damage and data stitching problems. In this work, a laminography pipeline for imaging large samples (>1 cm) at micrometre resolution is presented. The implementation includes a low-cost instrument setup installed at the 2-BM micro-CT beamline of the Advanced Photon Source. Additionally, sample mounting, scanning techniques, data stitching procedures, a fast reconstruction algorithm with low computational complexity, and accelerated reconstruction on multi-GPU systems for processing large-scale datasets are presented. The applicability of the whole laminography pipeline was demonstrated by imaging four sequential slabs throughout an entire mouse brain sample stained with osmium, in total generating approximately 12 TB of raw data for reconstruction.

Young’s double-slit interference with single hard X-ray photons

Double-slit interference experiments using monochromatic hard X-rays with the energy of 25 keV are presented. The experiments were performed at a synchrotron source with a distance of 110 m between the interferometer and the detector to produce an interference pattern with a sufficiently broad period that could be adequately sampled by a photon-counting detector with 75 micrometre pixels. In the single-particle version of the experiment, over one million image frames with a single registered photon in each one were collected. The sum of these frames showed a clear presence of the interference pattern with the expected period. Subsequent analysis provided an objective estimation of the minimal number of detected photons required to determine, in accordance with the Rose criterion, the presence of the photon interference. Apart from a general theoretical interest, these investigations were aimed at exploring the possibility of medical X-ray phase-contrast imaging in photon-counting regime at minimal radiation doses.

Synchrotron EDXRD strain-temperature measurement during laser welding

Synchrotron EDXRD strain-temperature measurement during laser welding

Benchmarking of X-Ray Fluorescence Microscopy with Ion Beam Implanted Samples Showing Detection Sensitivity of Hundreds of Atoms.

Single impurities in insulators are now often used for quantum sensors and single photon sources, while nanoscale semiconductor doping features are being constructed for electrical contacts in quantum technology devices, implying that new methods for sensitive, non-destructive imaging of single- or few-atom structures are needed. X-ray fluorescence (XRF) can provide nanoscale imaging with chemical specificity, and features comprising as few as 100000 atoms have been detected without any need for specialized or destructive sample preparation. Presently, the ultimate limits of sensitivity of XRF are unknown - here, gallium dopants in silicon are investigated using a high brilliance, synchrotron source collimated to a small spot. It is demonstrated that with a single-pixel integration time of 1 s, the sensitivity is sufficient to identify a single isolated feature of only 3000Ga impurities (a mass of just 350 zg). With increased integration (25 s), 650 impurities can be detected. The results are quantified using a calibration sample consisting of precisely controlled numbers of implanted atoms in nanometer-sized structures. The results show that such features can now be mapped quantitatively when calibration samples are used, and suggest that, in the near future, planned upgrades to XRF facilities might achieve single-atom sensitivity.

A closer look at high-energy X-ray-induced bubble formation during soft tissue imaging.

Improving the scalability of tissue imaging throughput with bright, coherent X-rays requires identifying and mitigating artifacts resulting from the interactions between X-rays and matter. At synchrotron sources, long-term imaging of soft tissues in solution can result in gas bubble formation or cavitation, which dramatically compromises image quality and integrity of the samples. By combining in-line phase-contrast imaging with gas chromatography in real time, we were able to track the onset and evolution of high-energy X-ray-induced gas bubbles in ethanol-embedded soft tissue samples for tens of minutes (two to three times the typical scan times). We demonstrate quantitatively that vacuum degassing of the sample during preparation can significantly delay bubble formation, offering up to a twofold improvement in dose tolerance, depending on the tissue type. However, once nucleated, bubble growth is faster in degassed than undegassed samples, indicating their distinct metastable states at bubble onset. Gas chromatography analysis shows increased solvent vaporization concurrent with bubble formation, yet the quantities of dissolved gasses remain unchanged. By coupling features extracted from the radiographs with computational analysis of bubble characteristics, we uncover dose-controlled kinetics and nucleation site-specific growth. These hallmark signatures provide quantitative constraints on the driving mechanisms of bubble formation and growth. Overall, the observations highlight bubble formation as a critical yet often overlooked hurdle in upscaling X-ray imaging for biological tissues and soft materials and we offer an empirical foundation for their understanding and imaging protocol optimization. More importantly, our approaches establish a top-down scheme to decipher the complex, multiscale radiation-matter interactions in these applications.

PINK: a tender X-ray beamline for X-ray emission spectroscopy.

A high-flux beamline optimized for non-resonant X-ray emission spectroscopy (XES) in the tender X-ray energy range has been constructed at the BESSY II synchrotron source. The beamline utilizes a cryogenically cooled undulator that provides X-rays over the energy range 2.1 keV to 9.5 keV. This energy range provides access to XES [and in the future X-ray absorption spectroscopy (XAS)] studies of transition metals ranging from Ti to Cu (Kα, Kβ lines) and Zr to Ag (Lα, Lβ), as well as light elements including P, S, Cl, K and Ca (Kα, Kβ). The beamline can be operated in two modes. In PINK mode, a multilayer monochromator (E/ΔE ≃ 30-80) provides a high photon flux (1014 photons s-1 at 6 keV and 300 mA ring current), allowing non-resonant XES measurements of dilute substances. This mode is currently available for general user operation. X-ray absorption near-edge structure and resonant XAS techniques will be available after the second stage of the PINK commissioning, when a high monochromatic mode (E/ΔE ≃ 10000-40000) will be facilitated by a double-crystal monochromator. At present, the beamline incorporates two von Hamos spectrometers, enabling time-resolved XES experiments with time scales down to 0.1 s and the possibility of two-color XES experiments. This paper describes the optical scheme of the PINK beamline and the endstation. The design of the two von Hamos dispersive spectrometers and sample environment are discussed here in detail. To illustrate, XES spectra of phosphorus complexes, KCl, TiO2 and Co3O4 measured using the PINK setup are presented.

High-pressure X-ray photon correlation spectroscopy at fourth-generation synchrotron sources.

A new experimental setup combining X-ray photon correlation spectroscopy (XPCS) in the hard X-ray regime and a high-pressure sample environment has been developed to monitor the pressure dependence of the internal motion of complex systems down to the atomic scale in the multi-gigapascal range, from room temperature to 600 K. The high flux of coherent high-energy X-rays at fourth-generation synchrotron sources solves the problems caused by the absorption of diamond anvil cells used to generate high pressure, enabling the measurement of the intermediate scattering function over six orders of magnitude in time, from 10-3 s to 103 s. The constraints posed by the high-pressure generation such as the preservation of X-ray coherence, as well as the sample, pressure and temperature stability, are discussed, and the feasibility of high-pressure XPCS is demonstrated through results obtained on metallic glasses.

Modelling the power threshold and optimum thermal deformation of indirectly liquid-nitrogen cryo-cooled Si monochromators.

Maximizing the performance of crystal monochromators is a key aspect in the design of beamline optics for diffraction-limited synchrotron sources. Temperature and deformation of cryo-cooled crystals, illuminated by high-power beams of X-rays, can be estimated with a purely analytical model. The analysis is based on the thermal properties of cryo-cooled silicon crystals and the cooling geometry. Deformation amplitudes can be obtained, quickly and reliably. In this article the concept of threshold power conditions is introduced and defined analytically. The contribution of parameters such as liquid-nitrogen cooling efficiency, thermal contact conductance and interface contact area of the crystal with the cooling base is evaluated. The optimal crystal illumination and the base temperature are inferred, which help minimize the optics deformation. The model has been examined using finite-element analysis studies performed for several beamlines of the Diamond-II upgrade.

Dual Beam microfocus high-energy tomography: Towards multimodal and faster laboratory experiments

This paper discusses the development of a Dual Beam microfocus high-energy X-ray tomography system for laboratory experiments, aiming to enhance temporal resolution and multimodal capabilities. Initially, X-ray computed tomography (XRCT) in materials science, particularly using synchrotron sources, provided valuable insights into microstructures. Digital volume correlation (DVC) emerged as a tool for measuring displacement fields during in situ XRCT tests. High-speed XRCT became possible with synchrotrons, but laboratory devices still face limitations due to moderate X-ray flux. This paper describes the design and implementation of a new dual high-energy X-ray tomograph with two twin beamlines. The paper also covers the first in situ dual-beam experiment involving the in situ compression test of an aluminium foam sample. It discusses calculating DVC displacement fields from radiographs, comparing them to control tomographic scans, and assessing their quality. The paper explores the potential for deforming initial scans using DVC fields, both from radiographs and tomographic scans. The approach shows reasonable quantitative agreement with control scans but does not capture rotational motion along the vertical axis.

Synchrotron-source micro-x-ray computed tomography for examining butterfly eyes.

Comparative anatomy is an important tool for investigating evolutionary relationships among species, but the lack of scalable imaging tools and stains for rapidly mapping the microscale anatomies of related species poses a major impediment to using comparative anatomy approaches for identifying evolutionary adaptations. We describe a method using synchrotron source micro-x-ray computed tomography (syn-μXCT) combined with machine learning algorithms for high-throughput imaging of Lepidoptera (i.e., butterfly and moth) eyes. Our pipeline allows for imaging at rates of ~15 min/mm3 at 600 nm3 resolution. Image contrast is generated using standard electron microscopy labeling approaches (e.g., osmium tetroxide) that unbiasedly labels all cellular membranes in a species-independent manner thus removing any barrier to imaging any species of interest. To demonstrate the power of the method, we analyzed the 3D morphologies of butterfly crystalline cones, a part of the visual system associated with acuity and sensitivity and found significant variation within six butterfly individuals. Despite this variation, a classic measure of optimization, the ratio of interommatidial angle to resolving power of ommatidia, largely agrees with early work on eye geometry across species. We show that this method can successfully be used to determine compound eye organization and crystalline cone morphology. Our novel pipeline provides for fast, scalable visualization and analysis of eye anatomies that can be applied to any arthropod species, enabling new questions about evolutionary adaptations of compound eyes and beyond.

Growth of ultimate high-density scintillating films for high-resolution X-ray imaging at synchrotrons

Scintillators are X-ray to visible light converters applied in X-ray imaging detectors used at synchrotrons. Drastically improved performances of the 4th generation synchrotron sources enable us to perform X-ray imaging experiments at higher energies. For high spatial resolution X-ray imaging (micrometer to submicrometer), thin scintillating films are required. Consequently, especially for high X-ray energies (30keV to 100keV), the detection efficiency is limited due to the low X-ray absorption efficiency of the thin films. We have used Liquid Phase Epitaxy (LPE) to grow thin films of one of the ultimate high-density materials, Lu2Hf2O7:Eu3+, which demonstrate scintillating properties and thus combine high spatial resolution and maximized absorption efficiency. X-ray imaging experiments demonstrate that the Modulation Transfer Function (MTF) reaches 10% at 900 lp/mm, and radiographs visually confirm the promising imaging properties. We present structural, luminescent, and scintillation characterization of Lu2Hf2O7:Eu thin films grown on ZrO2:Y substrates, showing that the films crystallize in the disordered fluorite structure and the europium ions incorporate into the structure and enhance the luminescence intensity. This contribution is a first step toward developing promising ultra-dense, hafnate-based scintillating screens for high spatial resolution X-ray imaging.

Increased spatial coherence length from an asymmetric crystal reflection at grazing exit.

Coherent X-ray imaging is an active field at synchrotron sources. The images rely on the available coherent flux over a limited field of view. At many synchrotron beamlines a double-crystal monochromator (DCM) is employed in a standard nondispersive arrangement. For coherent diffraction imaging it is advantageous to increase the available field of view by increasing the spatial coherence length (SCL) of a beam exiting such a DCM. Here, Talbot interferometry data together with ray-tracing simulations for a (+ - - +) four-reflection experimental arrangement are presented, wherein the first two reflections are in the DCM and the final fourth reflection is asymmetric at grazing exit. Analyses of the interferometry data combined with the simulations show that compared with the beam exiting the DCM a gain of 76% in the SCL was achieved, albeit with a factor of 20 reduction in flux density, which may not be a severe penalty at a synchrotron beamline. Previous efforts reported in the literature to increase the SCL that employed asymmetric crystal diffraction at grazing incidence are also discussed. A much reduced SCL is found presently in simulations wherein the same asymmetric crystal is set for grazing incidence instead of grazing exit. In addition, the present study is compared and contrasted with two other means of increasing the SCL. These are (i) focusing the beam onto an aperture to act as a secondary source, and (ii) allowing the beam to propagate in vacuum an additional distance along the beamline.

Scattered high-energy synchrotron radiation at theKARA visible-light diagnostic beamline.

To characterize an electron beam, visible synchrotron light is often used and dedicated beamlines at synchrotron sources are becoming a more common feature as instruments and methods for the diagnostics are, along with the accelerators, further developed. At KARA (Karlsruhe Research Accelerator), such a beamline exists and is based on a typical infrared/visible-light configuration. From experience at such beamlines no significant radiation was expected (dose rates larger than 0.5 µSv h-1). This was found not to be the case and a higher dose was measured which fortunately could be shielded to an acceptable level with 0.3 mm of aluminium foil or 2.0 mm of Pyrex glass. The presence of this radiation led to further investigation by both experiment and calculation. A custom setup using a silicon drift detector for energy-dispersive spectroscopy (Ketek GmbH) and attenuation experiments showed the radiation to be predominantly copper K-shell fluorescence and is confirmed by calculation. The measurement of secondary radiation from scattering of synchrotron and other radiation, and its calculation, is important for radiation protection, and, although a lot of experience exists and methods for radiation protection are well established, changes in machine, beamlines and experiments mean a constant appraisal is needed.

Robust image descriptor for machine learning based data reduction in serial crystallography.

Serial crystallography experiments at synchrotron and X-ray free-electron laser (XFEL) sources are producing crystallographic data sets of ever-increasing volume. While these experiments have large data sets and high-frame-rate detectors (around 3520 frames per second), only a small percentage of the data are useful for downstream analysis. Thus, an efficient and real-time data classification pipeline is essential to differentiate reliably between useful and non-useful images, typically known as 'hit' and 'miss', respectively, and keep only hit images on disk for further analysis such as peak finding and indexing. While feature-point extraction is a key component of modern approaches to image classification, existing approaches require computationally expensive patch preprocessing to handle perspective distortion. This paper proposes a pipeline to categorize the data, consisting of a real-time feature extraction algorithm called modified and parallelized FAST (MP-FAST), an image descriptor and a machine learning classifier. For parallelizing the primary operations of the proposed pipeline, central processing units, graphics processing units and field-programmable gate arrays are implemented and their performances compared. Finally, MP-FAST-based image classification is evaluated using a multi-layer perceptron on various data sets, including both synthetic and experimental data. This approach demonstrates superior performance compared with other feature extractors and classifiers.

Simulations of dislocation contrast in dark-field X-ray microscopy.

Dark-field X-ray microscopy (DFXM) is a full-field imaging technique that non-destructively maps the structure and local strain inside deeply embedded crystalline elements in three dimensions. In DFXM, an objective lens is placed along the diffracted beam to generate a magnified projection image of the local diffracted volume. This work explores contrast methods and optimizes the DFXM setup specifically for the case of mapping dislocations. Forward projections of detector images are generated using two complementary simulation tools based on geometrical optics and wavefront propagation, respectively. Weak and strong beam contrast and the mapping of strain components are studied. The feasibility of observing dislocations in a wall is elucidated as a function of the distance between neighbouring dislocations and the spatial resolution. Dislocation studies should be feasible with energy band widths of 10-2, of relevance for fourth-generation synchrotron and X-ray free-electron laser sources.

Unraveling grain growth of metallic tungsten: Investigating the nanoscale realm of hydrogen reduction of tungsten oxides

This paper focuses on the experimental observation of tungsten grain evolution during the process of hydrogen reduction of tungsten trioxide. The objective is to gain insights into the grain size distribution (GSD) evolution and morphology changes of metallic tungsten. The study employs an amalgamation of conventional characterization techniques – such as TGA, SEM-EDS, TEM and XRD – alongside cutting-edge techniques like phase contrast nano-tomography from synchrotron sources. Conducted as a quasi in-situ study, this research offers the opportunity to observe the transient evolution of the formed metallic tungsten phase within its precursor WO2 particles. The paper presents and discusses quantitative results concerning the evolution of GSD and morphological changes, encompassing growth rates of both crystallites and grains of the synthesized metallic phase. Additionally, the quasi in-situ study highlights the dependence of grain size on water concentration during the reduction process. The qualitative and quantitative findings contribute to a more nuanced understanding of the kinetics of grain growth of metallic tungsten and offer insights into the intricate interplay between reduction parameters, GSD evolution and morphological changes. Gaining a deeper understanding of the underlying mechanisms driving the changes in GSD establishes a foundation for predictive theory with immediate academic and industrial impact.

Efficient in situ screening of and data collection from microcrystals in crystallization plates.

A considerable bottleneck in serial crystallography at XFEL and synchrotron sources is the efficient production of large quantities of homogenous, well diffracting microcrystals. Efficient high-throughput screening of batch-grown microcrystals and the determination of ground-state structures from different conditions is thus of considerable value in the early stages of a project. Here, a highly sample-efficient methodology to measure serial crystallography data from microcrystals by raster scanning within standard in situ 96-well crystallization plates is described. Structures were determined from very small quantities of microcrystal suspension and the results were compared with those from other sample-delivery methods. The analysis of a two-dimensional batch crystallization screen using this method is also described as a useful guide for further optimization and the selection of appropriate conditions for scaling up microcrystallization.