Synchronization Mechanism Research Articles

Negative emotions disrupt intentional synchronization during group sensorimotor interaction.

Emotions play a fundamental role in human interactions and trigger responses in physiological, psychological, and behavioral modalities. Interpersonal coordination often entails attunement between individuals in various modalities. Previous research has elucidated the mechanisms of interpersonal synchronization and the emotions aroused by joint action: cardiac activity aligns in disputing marital couples, spectators share enjoyment in observing live dance performances, and joint finger-tapping evokes positive emotions. However, little is known about the impact of emotions on intentional interpersonal synchronization. To address this problem, we conducted an experiment in 2022 asking 60 participants to engage in a three-way finger-tapping synchronization task. We systematically induced emotional states (positive, neutral, and negative) with social comparison feedback using success-failure manipulations. An analysis of behavior synchronization using the Kuramoto order parameter revealed that negative emotion induction significantly diminished time spent in synchrony compared to positive induction. Moreover, the results exposed incremental struggles in attaining higher levels of synchronization (Q2-Q3) after the induction of negative emotions. These outcomes further substantiate the necessity of integrating the indices of agents' emotions into interpersonal synchronization and coordination models. We discuss the implications of this work for research on interpersonal emotion in joint action and applied outcomes in emotion-aware technologies and interventions. (PsycInfo Database Record (c) 2024 APA, all rights reserved).

Fraud Feature Boosting Mechanism and Spiral Oversampling Balancing Technique for Credit Card Fraud Detection

With the flourishing of the credit card business and Internet technology, the risk of fraudulent credit card transactions is ever-increasing due to the complex information involved in the credit card business. Since the high redundancy of feature information and imbalance of class distribution in transaction data, the performance of the existing machine learning-based models for detecting credit card fraudulent transactions still needs to be improved. Therefore, it is crucial to build fraud detection models for effective feature engineering and sampling techniques. This article proposes a credit card fraud detection model incorporating a fraud feature-boosting mechanism with a spiral oversampling balancing technique (SOBT). Specifically, we present a compound grouping elimination strategy to exclude highly redundant and correlated features from the credit card transaction dataset and improve the data quality. Furthermore, we design a multifactor synchronous embedding mechanism, which combines the performance evaluation metrics of the embedding model for each feature and improves the decision-making ability of each feature for the target domain. Moreover, we propose an SOBT to balance the ratio of legitimate to fraudulent transactions, which improves the ability of the fraud detection model to distinguish legitimate from fraudulent transactions. Extensive experimental results based on two real-world datasets demonstrate that our methods can facilitate efficient credit card fraud detection and achieve better performance than state-of-the-art methods.

Investigating Small Disturbance Stability in Wind Farm Grid-Connected Systems: A Data-Driven Approach

The presence of unknown synchronization characteristics, unclear instability mechanism, and various fault mode evolution laws, lacking corresponding theoretical support and analysis methods and instability criteria, are defined with clear physical concepts. It is still impossible to systematically understand the transient synchronization mechanism of the wind power grid-connected system from the perspective of the whole fault stage. Therefore, this study uniformly reveals its temporary synchronous stability problem and proposes a large/small disturbance adaptive synchronous stability control method, which improves the dynamic characteristics of the wind turbine through the control of the inverter itself to improve the system stability—using different scenarios, such as single doubly-fed wind turbines. The experimental results show that the small disturbance on the AC side significantly impacts the system characteristics, followed by a bit of annoyance on the DC side. The DC side fault will cause a change in system frequency characteristics, especially at the receiving end. However, compared with the Voltage Source Converters-High Voltage Direct Current (VSC-HVDC)system, Modular Multilevel Converters-High Voltage Direct Current (MMC-HVDC) systems operate at a much higher frequency and produce less low-frequency harmonics. This makes them less likely to induce subsynchronous oscillations in the system.

THE POSSIBILITIES OF USING PARALLEL PROGRAMMING USING PYTHON

This article explores the development of parallel software applications using the Python programming language. Parallel programming is becoming increasingly important in the information technology world as multi-core processors and distributed computing become more common. Python provides developers with a variety of tools and libraries for creating parallel applications, including threads, processes, and asynchronous programming. This topic covers the basics of parallel programming in Python, including the principles of thread and process management, error handling, synchronization mechanisms, and resource management. He also considers asynchronous programming using the asyncio library, which allows you to efficiently handle asynchronous tasks. In addition, this topic raises issues of optimization and profiling of parallel applications, as well as explores distributed parallel programming using third-party libraries and frameworks. He also emphasizes the importance of testing and debugging in the context of parallel programming. Research and experiments in parallel programming using Python help developers create high-performance and efficient applications that can effectively use multi-core systems and distributed computing. This article offers an in-depth study that examines how Python is suitable for teaching parallel programming to inexperienced students. The results show that there are obstacles that prevent Python from maintaining its advantages in the transition from sequential programming to parallel.

Mathematical modeling of temperature-induced circadian rhythms

The central circadian pacemaker in the suprachiasmatic nuclei (SCN) aligns the phase and period of autonomous molecular oscillators in peripheral cells to daily light/dark cycles via physiological, neuronal, hormonal, and metabolic signals. Among different entrainment factors, temperature entrainment has been proposed as an essential alternative for inducing and sustaining circadian rhythms in vitro. While the synchronization mechanisms for hormones such as glucocorticoids have been widely studied, little is known about the crucial role of body temperature as a systemic cue. In this work, we develop a semi-mechanistic mathematical model describing the entrainment of peripheral clocks to temperature rhythms. The model incorporates a temperature sensing-transduction cascade involving a heat shock transcription factor-1 (HSF1) and heat shock response (HSR) pathway to simulate the entrainment of clock genes. The model is used to investigate the mammalian temperature entrainment and synchronization of cells subject to temperature oscillations of different amplitudes and magnitudes and examine the effects of transitioning between temperature schedules. Our computational analyses of the system’s dynamic responses reveal that 1) individual cells gradually synchronize to the rhythmic temperature signal by resetting their intrinsic phases to achieve coherent dynamics while oscillations are abolished in the absence of temperature rhythmicity; 2) alterations in the amplitude and period of temperature rhythms impact the peripheral synchronization behavior; 3) personalized synchronization strategies allow for differential, adaptive responses to temperature rhythms. Our results demonstrate that temperature can be a potent entrainer of circadian rhythms. Therefore, in vitro systems subjected to temperature modulation can serve as a potential tool for studying the adjustment or disruption of circadian rhythms.

Дослідження проблем синхронізації та захисту даних при реалізації багатопоточних програм

The issue of shared data usage by threads is especially relevant in modern multi-core and multiprocessor systems. The main problems of implementing multithreaded programs are race conditions, deadlocks, and thread starvation. The aim of the work is to solve the problem of thread racing in multithreaded calculations of resource-intensive tasks with parallel access to shared data using appropriate synchronization mechanisms, such as mutexes. A multithreaded algorithm for implementing a typical task of processing large data arrays with protection of the critical area in concurrent programs running on multiprocessor and multi-core systems has been developed and researched.

Parallel multi‐rate simulation scheme for modular multilevel converter‐based high‐voltage direct current with accurate simulation of high‐frequency characteristics and field programmable gate array‐based implementation

AbstractThe real‐time simulation of the modular multilevel converter‐based high‐voltage direct current (MMC‐HVDC) transmission system has become a popular research topic. However, in order to meet the real‐time performance, the real‐time simulation technology will cause additional simulation errors for MMC‐HVDC, especially on its frequency characteristics. Therefore, a parallel multi‐rate simulation scheme for MMC‐HVDC is developed in this work to ensure accurate simulation of high‐frequency characteristics. Firstly, a non‐error method based on converter transformer decoupling is proposed to decouple the converter and alternating current system; direct current transmission line decoupling and arm decoupling methods are used to achieve decoupling among and within converters. A multi‐rate data synchronous mechanism is established by considering the differences among high‐frequency characteristics caused by delayed data interaction. Secondly, the computing architectures of the primary system solver and modular multilevel converter controller are designed based on a field programmable gate array (FPGA). The real‐time simulation platform for a four‐terminal true bipolar MMC‐HVDC is constructed based on the FPGA array. Thirdly, the factors in multi‐rate simulation affecting the simulation accuracy of high‐frequency characteristics are analysed. The simulator is shown to be accurate in steady and dynamic states. The authors also verify its applicability for further research on high‐frequency resonance based on control experiments.

Dynamics of cuticle-associated transcript profiles during moulting of the bed bug Cimexlectularius

The bed bug Cimex lectularius is a worldwide human pest. The sequenced genome allows molecular analyses of all aspects of bed bug biology. The present work was conducted to contribute to bed bug cuticle biology. As in other insect species, the C. lectularius cuticle consists of the three horizontal layers procuticle, epicuticle and envelope. To analyse the genes needed for the establishment of the stratified cuticle, we studied the expression pattern of 42 key cuticle-related genes at the transition of the penultimate nymphal stage to adult animals when a new cuticle is formed. Based on gene expression dynamics, in simplified model, we distinguish two key events during cuticle renewal in C. lectularius. First, upon blood feeding, modulation of ecdysone signalling culminates in the transcriptional activation of the transcription factor Clec-Ftz-F1 that possibly controls the expression of 32 of the 42 genes tested. Second, timed expression of Clec-Ftz-F1 seems to depend also on the insulin signalling pathway as RNA interference against transcripts of the insulin receptor delays Clec-Ftz-F1 expression and stage transition. An important observation of our transcript survey is that genes needed for the construction of the three cuticle layers are largely expressed simultaneously. Based on these data, we hypothesise a considerable synchronous mechanism of layer formation rather than a strictly sequential one. Together, this work provides a basis for functional analyses of cuticle formation in C. lectularius.

Multi-level digital twin-driven kitting-synchronized optimization for production logistics system

The kit production mode is favored by many manufacturing companies due to its ability to meet customized and personalized customer demands through versatile combinations. However, it also poses significant challenges to production management. In the production process, companies need to consider not only horizontal coordination between upstream and downstream stages of the production logistics system (production, transportation, warehousing) but also vertical coordination of production progress for different products within the kit. Moreover, they must address various dynamic disturbances during production operations. This paper proposes an intelligent kit production management platform to tackle these challenges. It adopts a multi-level digital twin architecture as the platform control structure, a "two-stage three-level" synchronization mechanism as the qualitative control mechanism, and the target cascade method based on genetic algorithms as the quantitative solution foundation. This platform enables synchronized control of kit production in dynamic environments. Finally, through a case study simulation, the feasibility and effectiveness of the proposed approach are verified. The study also explores the impact of varying magnitudes of dynamics at different times of occurrence on the production logistics system, providing valuable insights for management practices.

FPGAs memory synchronization and performance evaluation using the open computing language framework

<p>One advantage of the open computing language (OpenCL) software framework is its ability to run on different architectures. Field programmable gate arrays (FPGAs) are a high-speed computing architecture used for computation acceleration. This work develops a set of eight benchmarks (memory synchronization functions, explained in this study) using an OpenCL framework to study the effect of memory access time on overall performance when targeting the general FPGA computing platform. The results indicate the best synchronization mechanism to be adopted to synthesize the proposed design on the FPGA computation architecture. The proposed research results also demonstrate the effectiveness of using a task-parallel model approach to avoid using high-cost synchronization mechanisms within proposed designs that are constructed on the general FPGA computation platform.</p>

Enable Precise Timing with Clock Ensemble in Packet Networks

The need for accurate and reliable time is increasingly important for network infrastructures with precise timing requirements. Traditional time distribution in networks is carried out through dedicated synchronization networks, whose networking mode may limit the applicability of time synchronization for emerging applications in terms of synchronization performance, cost-effectiveness, and reliability. This paper introduces a new concept of Network Clock Ensemble (NCE) and explores the feasibility of constructing an innovative mechanism for network time synchronization. Specifically, an NCE scheme is proposed based on a software-defined time synchronization network architecture to obtain time accuracy and stability by forming a synergistic effect between clocks in packet networks. The NCE model and method are used to reveal the precise timing mechanism. Simulation experiments and numerical analysis results show that our scheme can achieve significant performance improvements in terms of time accuracy and stability. Furthermore, with the improvement of the network time synchronization performance, the NCE results gradually approximate the Clock Ensemble (CE) results in the actual test, further verifying the effectiveness and feasibility of the proposed scheme.

FPGA-Based Real-Time Synchronous Parallel System for Underwater Acoustic Positioning and Navigation

With the development of autonomous underwater vehicles, the research of underwater acoustic positioning and navigation technology is becoming increasingly important. However, most underwater positioning systems use the traditional acoustic response synchronization method, which leads to insufficient positioning real-time performance and refresh rate. To solve this problem, this paper proposes a real-time global synchronization mechanism with high-precision atomic clocks, which can realize one positioning through one-way propagation, so that the positioning efficiency is at least doubled. To further improve the positioning accuracy, an M-sequence-based phase offset modulation method is proposed to facilitate beacon identification. Consequently, a normalized signal matching capture algorithm against Doppler effect is designed, and the positioning solution is fused with the real-time sound ray bending compensation mechanism. Based on the above content, we developed an FPGA-based real-time synchronous parallel underwater positioning and navigation (RSPUPN) system, which uses FPGA+MCU architecture to accelerate signal processing operations in a low-power and parallel way. The test results in the South China Sea show that the operating range of the system can reach 8 km, the positioning refresh rate can reach 0.2 Hz, and the relative average position error is 0.25%, confirming the effectiveness of the designed system in industrial applications.

Collective synchronization through noise cancellation.

After decades of study, there are only two known mechanisms to induce global synchronization in a population of oscillators: Deterministic coupling and common forcing. The inclusion of independent noise in these models typically serves to drive disorder, increasing the stability of the incoherent state. Here we show that the reverse is also possible. We propose and analyze a simple general model of purely noise coupled oscillators. In the first explicit choice of noise coupling, we find the linear response around incoherence is identical to that of the paradigmatic Kuramoto model but exhibits binary phase locking instead of full coherence. We characterize the phase diagram, stationary states, and approximate low-dimensional dynamics for the model, revealing the curious behavior of this mechanism of synchronization. In the second minimal case we connect the final synchronized state to the initial conditions of the system.

BEANet: An Energy-efficient BLE Solution for High-capacity Equipment Area Network

The digital transformation of factories has greatly increased the number of peripherals that need to connect to a network for sensing or control, resulting in a growing demand for a new network category known as the Equipment Area Network (EAN). The EAN is characterized by its cable-free, high-capacity, low-latency, and low-power features. To meet these expectations, we present BEANet , a novel solution designed specifically for EAN that combines a two-stage synchronization mechanism with a time division protocol. We implemented the system using commercially available Bluetooth Low Energy (BLE) modules and evaluated its performance. Our results show that the network can support up to 150 peripherals with a packet reception rate of 95.4%, which is only 0.9% lower than collision-free BLE transmission. When the cycle time is set to 2 s, the average transmission latency for all peripherals is 0.1 s, while the power consumption is 18.9 μW, which is only half that of systems using LLDN or TSCH. Simulation results also demonstrate that BEANet has the potential to accommodate over 30,000 peripherals under certain configurations.

Synchronizing TSN Devices via 802.1AS over 5G Networks

The 3GPP release 16 integrates TSN functionality into 5G and standardizes various options for TSN time synchronization over 5G such as transparent mode and bridge mode. The time domains for the TSN network and the 5G network are kept separate with an option to synchronize either of the networks to the other. The TSN time synchronization over 5G is possible either by using the IEEE 1588 generalized Precision Time Protocol (gPTP) based on UDP/IP multicast or via IEEE 802.1AS based on Ethernet PDUs. The INET and Simu5G simulation frameworks, which are both based on the OMNeT++ discrete event simulator, are widely used for simulating TSN and 5G networks. The INET framework comprises the 802.1AS based time synchronization mechanism, and Simu5G provides the 5G user plane carrying IP PDUs. We modified the 802.1AS-based synchronization model of INET so that it works over UDP/IP. With that, it is possible to synchronize TSN slaves (connected to 5G UEs), across a 5G network, with a TSN master clock, present within a TSN network, that is connected to the 5G core network. Our simulation results show that 500 microseconds of synchronization accuracy can be achieved with the corrected asymmetric propagation delay of uplink and downlink between the gNodeB (gNB) and the User Equipment (UE). Furthermore, the synchronization accuracy can be improved if the delay difference between uplink and downlink is known.

TJ-FlyingFish: An Unmanned Morphable Aerial–Aquatic Vehicle System

In this paper, we present in this work a fairly complete process for developing an unmanned aerial–aquatic vehicle system, TJ-FlyingFish, which includes an innovative design methodology of the aerial–aquatic platform and the cross-medium localization, dynamics modeling, and flight control systems. The development faces the challenge how to manipulate locomotion effectively in both water and air which presents substantial differences in fluid properties. Additionally, there are difficulties in perception and navigation because of the discontinuity of mediums. To cope with these challenges, we designed an innovative unmanned aerial–aquatic vehicle with an optimized dual-speed and tilting propulsion configuration. The rotors/propellers operate in different ranges of rotating speed in the two different mediums, providing sufficient thrust and ensuring output efficiency. Besides, thrust vectoring is achieved by rotating each propulsion unit around its mounted arm, facilitating agile underwater cruising. Another key component of our approach is a sophisticated multi-sensor-based cross-medium localization system that combines SLAM, sensor synchronization, and data capture mechanisms, enabling seamless transitions between aerial and aquatic environments, and supporting autonomous operations. The results are fully validated through actual flight experiments.

Synchronization enhancement subjected to adaptive blinking coupling.

Synchronization holds a significant role, notably within chaotic systems, in various contexts where the coordinated behavior of systems plays a pivotal and indispensable role. Hence, many studies have been dedicated to investigating the underlying mechanism of synchronization of chaotic systems. Networks with time-varying coupling, particularly those with blinking coupling, have been proven essential. The reason is that such coupling schemes introduce dynamic variations that enhance adaptability and robustness, making them applicable in various real-world scenarios. This paper introduces a novel adaptive blinking coupling, wherein the coupling adapts dynamically based on the most influential variable exhibiting the most significant average disparity. To ensure an equitable selection of the most effective coupling at each time instance, the average difference of each variable is normalized to the synchronous solution's range. Due to this adaptive coupling selection, synchronization enhancement is expected to be observed. This hypothesis is assessed within networks of identical systems, encompassing Lorenz, Rössler, Chen, Hindmarsh-Rose, forced Duffing, and forced van der Pol systems. The results demonstrated a substantial improvement in synchronization when employing adaptive blinking coupling, particularly when applying the normalization process.

A novel DC‐link voltage synchronous control with enhanced inertial capability for full‐scale power conversion wind turbine generators

AbstractThe new power system is characterized by high penetration of renewable energy sources and a high proportion of power electronics (namely, double‐high). The grid‐forming control is an effective method to improve the grid‐connected stability of wind turbine generators (WTGs) in the “double‐high” grid. The control method based on the DC‐link voltage can effectively realize the grid‐forming control for WTGs. However, there is a disadvantage that the DC‐link voltage cannot be maintained at the given value. To address this, the grid synchronization mechanism of DC‐link voltage is explored and the specific implementation of a novel DC‐link voltage synchronous control applicable to full‐scale power conversion WTGs is proposed. Then, the boundary of the inertial coefficient is probed through the state‐space method. And a compensation control is proposed to enlarge the inertial response capability based on the mechanism of damping characteristics. Finally, the PSCAD/EMTDC simulation and RTLAB hardware‐in‐loop experiment show that the synchronization frequency can accurately map the grid frequency changes in real‐time under the premise that the DC‐link voltage remains constant. In addition, the inertial coefficient can be increased by more than five times with the compensation strategy, which can enhance the support capability of the WTGs to the power grid.

Implementasi Load Balancing dengan HAProxy di Sistem Informasi Akademik UIN Sunan Kalijaga

Efficiently managing academic information systems (AIS) is essential for educational institutions to provide reliable services to students and faculty. This research explores the integration of HAProxy load balancing and file synchronization techniques to optimize the performance of AIS. HAProxy is employed to distribute incoming requests across multiple backend servers, and the backend will call web service to access the data saved in the database to facilitate seamless data sharing and access. Additionally, file synchronization mechanisms are implemented to maintain consistency across scripts used in the backend system. The study conducts performance evaluations and benchmarks to assess the impact of HAProxy load balancing and file synchronization on AIS responsiveness and reliability. The results reveal significant system scalability and fault tolerance improvements, reducing downtime and enhancing user experience. This research contributes to optimizing academic information systems, enhancing their ability to handle increased loads, and ensuring the efficient delivery of educational services.

An Axiomatic Basis for Computer Programming on the Relaxed Arm-A Architecture: The AxSL Logic

Very relaxed concurrency memory models, like those of the Arm-A, RISC-V, and IBM Power hardware architectures, underpin much of computing but break a fundamental intuition about programs, namely that syntactic program order and the reads-from relation always both induce order in the execution. Instead, out-of-order execution is allowed except where prevented by certain pairwise dependencies, barriers, or other synchronisation. This means that there is no notion of the 'current' state of the program, making it challenging to design (and prove sound) syntax-directed, modular reasoning methods like Hoare logics, as usable resources cannot implicitly flow from one program point to the next. We present AxSL, a separation logic for the relaxed memory model of Arm-A, that captures the fine-grained reasoning underpinning the low-overhead synchronisation mechanisms used by high-performance systems code. In particular, AxSL allows transferring arbitrary resources using relaxed reads and writes when they induce inter-thread ordering. We mechanise AxSL in the Iris separation logic framework, illustrate it on key examples, and prove it sound with respect to the axiomatic memory model of Arm-A. Our approach is largely generic in the axiomatic model and in the instruction-set semantics, offering a potential way forward for compositional reasoning for other similar models, and for the combination of production concurrency models and full-scale ISAs.