Synorogenic Basins Research Articles

Detrital zircon U-Pb + Hf data supports 2.1 Ga extensional and 2.0 Ga syn-orogenic basin in southwest Rae Province during early Nuna assembly

This study examines the Paleoproterozoic history of supracrustal rocks in the western Canadian Shield to better inform the tectonic history of northern Laurentia. Samples for detrital zircon U-Pb geochronology and Hf isotopes were collected from the western Rae Province, Taltson magmatic zone, and the Great Slave Lake shear zone in order to assess depositional ages, provenance and geodynamic significance of the detrital systems. Samples from the western Rae Province were sourced locally and deposited after 2.1 Ga in a broadly extensional regime, based on widespread source terrane ages and few data near the maximum depositional age as well as coeval regional mafic magmatism and absence of coeval metamorphism. By contrast, the Taltson samples were deposited after 2.0 Ga, have a significant 2.2 to 2.0 Ga detrital source of relatively juvenile material, have young zircon that overlap in age with the Taltson and Thelon orogens, and yield a significant fraction of the dates that are close to the maximum depositional age. These Taltson samples were also derived from western Rae Province sources or Buffalo Head and Chinchaga domain sources and are interpreted to have formed in a contractional or collisional regime coeval with Taltson-Thelon orogeny. The 2.2 to 2.0 Ga detritus was likely derived from reworked ca. 2.3 Ga juvenile source. A sample from the Great Slave Lake shear zone was deposited after 2.0 Ga in a contractional/collisional regime and was sourced from Slave Province crust and Taltson-Thelon plutons. Our data support extension along the western Rae Province margin at ca. 2.1 Ga and distinct histories of the Rae and Slave Provinces prior to their collision at ca. 1.95 Ga. Before 2.1 Ga, the Rae Province may have been attached to the Slave, North China, Bastar, Dharwar, or Sinhghbum cratons.

Identifying and characterizing missing source orogens for syn-orogenic basins based on detrital accessory mineral U-Pb geochronology and trace element geochemistry

Abstract Identifying source orogens for syn-orogenic sediments in dispersed fragments of a supercontinent provides key information on the tectonic evolution of the orogens involved in supercontinent assembly and on paleogeographic reconstruction. An approach using U-Pb geochronology and trace elements of multiple detrital minerals including zircon, rutile, apatite, and monazite has major advantages over detrital zircon studies alone. Application of this multi-pronged approach to Ediacaran and Cambrian clastic sedimentary rocks from the West Cathaysia terrane of the South China block demonstrates that these rocks were deposited in two distinct, but overlapping, syn-orogenic basins related to the assembly of eastern Gondwana. The Ediacaran rocks have detritus likely sourced from the Paterson-Petermann orogen (PPO) in Australia, and the dominant 650–600 Ma populations and trace element compositions of detrital rutile and apatite indicate a significant Ediacaran thermal and high-pressure metamorphic event in the orogen. The appearance of Cambrian and Tonian detrital rutile and apatite populations in the Cambrian rocks indicates derivation from a different source orogen characterized by multiple thermal events, most likely the Kuunga-Pinjarra orogen (KPO). Our data suggest that West Cathaysia was located adjacent to both the PPO and the KPO and support the hypothesis that the PPO was a collisional, rather than a long-lived post-Grenvillian intraplate, orogen. Our data also suggest a poly-metamorphic history for the poorly preserved northern part of the KPO and a larger expanse of Greater India.

Mississippian olistostromes of Iberia revisited: tectonic drivers of synorogenic carbonate platform/reef destruction

This paper reviews the synorogenic basins formed on the Gondwana side of the Variscan Orogen of Iberia, highlighting the widespread occurrence of calciturbiditic formations and olistostromes containing reef limestone olistoliths in Iberia's Variscan basins. Using key examples from the Variscan Orogen for comparison (the Azrou–Khenifra and Rhenohercynian basins), the significance of these olistostromes and flyschoid deposits is discussed. Our tectonic models of the Variscan belt in Iberia propose possible drivers of synorogenic carbonate platform/reef destruction responsible for the origin of calciturbidites and olistostromes. One model proposes the formation of an orogenic plateau via the lateral flow of partially molten orogenic roots in the context of Laurussia–Gondwana convergence following the destruction of the Rheic Ocean and slab retreat of the Gondwana (lower) plate. An alternative model invokes subduction of Palaeotethys oceanic lithosphere beneath the Gondwana (upper) plate. Both emphasize the Mississippian occurrence of a significant thermal anomaly beneath Gondwana that favoured strong lithosphere thinning, creating ideal conditions for synorogenic carbonate platform/reef destruction and the formation of calciturbidite deposits and olistostromes in Iberia. The Variscan palaeotopography would look similar in both situations. Distinguishing between these models is therefore not straightforward, with differences in the kinematics of regional tectonic transport in the superstructure of Mississippian gneiss domes. Thematic collection: This article is part of the Ophiolites, melanges and blueschists collection available at: https://www.lyellcollection.org/topic/collections/ophiolites-melanges-and-blueschists

Tectonic significance of the late-Ediacaran syn-orogenic basin in the easternmost portion of the Paraguay Belt, Tocantins Province, central Brazil

Sedimentary provenance studies using detrital zircon U–Pb ages represent an important tool to investigate the evolution of orogenic basins and to suggest tectonic settings and paleogeography reconstructions when it comes to supercontinent modeling. Syn-orogenic basins worldwide are characterized by a large proportion of zircons with ages close to the maximum depositional period, reflecting the proximity of recently formed magmatic rocks. In this work, we combine field observations, detrital zircon U–Pb ages, whole-rock Sm–Nd and mica Ar–Ar isotopic analyses to constrain the final tectonic evolution of a restricted basin located in a poorly studied region at the easternmost limit of the Paraguay Belt in the Tocantins Province, central Brazil. The investigated area corresponds to the boundary sector of the Paraguay Belt and the Brasília Belt and is also transected by the strike-slip fault system associated with the Transbrasiliano Lineament. This sector was previously mapped as part of the Cuiaba Group, internal zone of the Paraguay Belt. We provide 465 new detrital zircon U–Pb data with ages distributed from the early Cambrian to the Archean, with approximately 60% of the analyzed grains derived from Ediacaran-Cryogenian sources. The maximum depositional age of the basin is defined at ca. 590 Ma, constrained by the youngest age peak and an evident provenance shift in detrital input in the Paraguay Belt was demonstrated. The syn-orogenic character of the basin is inferred based on the main peak of the detrital zircon population age distribution around 600 Ma, which is very close to the maximum depositional period and points to a short time between erosion, deposition, and burial processes. The muscovite 40Ar/39Ar age of ca. 536–546 Ma obtained for muscovite schist metamorphosed under greenschist facies conditions indicates that the regional thermal regime was maintained up to the early-Cambrian in the area. The minimum fast cooling rate of 25 °C/Myr defined in the investigated area is constrained by the 40Ar/39Ar analysis of biotite (549.16 ± 1.30 Ma) from a syn-to late-kinematic granodiorite intrusion. The very rapid magma emplacement occurred into relatively shallow crustal levels through the associated strike-slip faults. The Transbrasiliano Lineament would have facilitated the rapid unroofing of the study area and therefore the syn-orogenic deposition in a foreland domain at the final phase of West Gondwana amalgamation. The studied metasedimentary rocks represent a transition phase from the passive margin sedimentation (Cuiabá Group) to an orogenic phase, constraining an inversion event in the West Gondwana around ca. 590 Ma. The data provide evidence of a late orogenic basin that was formed contemporaneously with the evolution of an active margin between the Amazonian Craton and the eastern blocks/cratons (São Francisco-Congo and Rio de la Plata cratons and Paranapanema Block) close to Cambrian times. Our results support the existence of the younger Clymene Ocean and the subsequent final assembly of West Gondwana in the Cambrian.

Sensitivity of marginal basins in recording global icehouse and regional tectonic controls on sedimentation. Example of the Cergowa Basin, (Oligocene) Outer Carpathians

Global sea-level fall during the late Eocene-Oligocene icehouse, in conjunction with the Alpine orogenesis, resulted in the epicontinental Paratethys Sea formed at the northern margin of the Tethys Ocean. Among the Paratethys sub-basins, the foreland Dukla Basin hosted dark dysoxic Menilite Shales. Within these the lenticular body of deep-marine Cergowa Beds was deposited. Due to its marginal position and orogenic activity, the Cergowa depocenter was sensitive to a broad range of influences reflected by: separation from and re-connection with the Tethys Ocean; reactions to global sea-level change; variations in calcareous nannoplankton palaeoecology and fluctuations in water chemistry; changing sediment gravity flow mechanisms; facies progradation and basin tectonics; palaeotransport direction; and changes in the calcite compensation depth. The proximal north-western part of the Cergowa depocenter consisted of two troughs evolving towards the south-east into an unconfined distal area. This is shown by palaeocurrent patterns changing down current from low-dispersion to fanning out distributions. Sedimentation during the succeeding NP23 nannoplankton zone was controlled by glacio-eustatic shallowing, enhanced by tectonic uplift, both resulting in isolation from the Tethys Ocean, forming a brackish environment affected by fluvial supply. Aggrading sand-rich proximal turbidite facies common at this stage include hyperpycnally-generated sustained turbidites that were sourced from shelf-edge delta, as well as hybrid event beds that reflect erosion of morphologically unbalanced slopes modified by fold-thrust tectonics. Nannoplankton of the succeeding NP24 zone documents normal salinity of an open sea that was reconnected with the Tethys Ocean, which is contrary to the global cooling and related eustatic sea-level lowstand during this time. At this stage, deposits of low-density turbidity currents predominate and form a succession prograding towards the south-east. Therefore, the oceanic reconnection was likely controlled by local subsidence, the rate of which exceeded the rate of deposition, especially in the south-east. The reconnection also influenced the calcite compensation depth level and resulted in an increase in coccolithophore productivity, recorded by laminated pelagic limestone interbeds within the youngest fining-upwards part of the Cergowa Beds succession. This fining-upwards sequence of low-density turbidites reflects retrogradation of the arenaceous material within the distributary system and a transition to mudstone-dominated disoxic facies of the Menilite Beds, being the most productive hydrocarbon and helium source rock unit in the Outer Carpathians. These processes and relationships show that due to the marginal position of the synorogenic basin, the Cergowa Beds record environmental sensitivity to extrabasinal and intrabasinal factors, and a broad range of global, regional, and local influences, thus providing insights applicable to research into the evolution of other basins placed in a similar context.

Development of the Whitehorse trough as a strike-slip basin during Early to Middle Jurassic arc-continent collision in the Canadian Cordillera

Abstract The Whitehorse trough is a synorogenic basin in the northern Cordillera that resulted from arc-collision processes along the northwestern margin of North America, but its filling history and tectonic significance remain uncertain. New detrital zircon U-Pb-Hf isotope analyses of 12 rock samples, including six basal sandstones that sit unconformably on Triassic rocks of Stikinia, were combined with published detrital zircon and fossil data to establish the depositional ages of synorogenic Laberge Group strata in Yukon and test proposed links between Intermontane terrane exhumation and basin-filling events. Laberge Group strata yielded 205–170 Ma and 390–252 Ma detrital zircon populations that indicate derivation from local Late Triassic to Middle Jurassic arc and syncollisional plutons and metamorphosed Paleozoic basement rocks of the Stikinia and Yukon-Tanana terranes. Basal sandstone units have Early Jurassic depositional ages that show the Whitehorse trough filled during early Sinemurian, late Sinemurian to Pliensbachian, and Toarcian subsidence events. Late Triassic to Early Jurassic detrital zircon grains confirm that syncollisional plutons near the northern trough were exhumed at 0.5–7.5 mm/yr and replicate their excursion to subchondritic Hf isotope compositions as a result of increasing crustal contributions from Rhaetian to Sinemurian time. The new detrital zircon data, combined with recent constraints for Triassic–Jurassic metamorphism and magmatism in Yukon, require modification of published forearc to syncollisional basin models for the Whitehorse trough. We reinterpret Jurassic subsidence patterns and architecture of the Whitehorse trough to reflect sinistral transtension within a transform fault system that resulted from the reorganization of subduction after end-on arc collision.

OH-Defects in Detrital Quartz Grains from the Julian Basin (NE Italy and Slovenia): A Fourier Transform Infrared Study

In this study, we analyzed up to 80 detrital quartz grains from four lithic greywackes along the stratigraphic column of the Julian Basin, a synorogenic basin in the southeastern Alps between Italy and Slovenia. Fourier transform infrared spectroscopy of detrital quartz was used to investigate the sample set with interest to its OH-defect speciation and content of each associated substitution. According to several recent studies, OH-defects in quartz are correlated to petrogenetic conditions of the source material and can be used as a provenance tool. The aim of this study is to compare results based on this method with previous studies that used other methods, to better constrain the palaeogeographical reconstruction of sedimentary fluxes. Detrital quartz within the samples of the basin shows different patterns of OH-defects and water content, indicating substantial petrogenetic differences between the sediment source rocks. For the oldest analyzed sample (ca. 66 Ma), the distribution of OH-defects suggests a mixed source between igneous and non-igneous rocks, with a predominance of metamorphic material supply. Another sample (56 Ma) reveals a great variability of OH-defects and water content, indicating that the magmatic component dominates over the metamorphic component. The distribution of OH-defects in the samples at the top of the sequence (52–53 Ma) suggests an almost solely metamorphic source. These results are in line with previous studies based on heavy minerals and geochemistry.

Evolution of a low convergence collisional orogen: a review of Pyrenean orogenesis

The Pyrenees is a collisional orogen built by inversion of an immature rift system during convergence of the Iberian and European plates from Late Cretaceous to late Cenozoic. The full mountain belt consists of the pro-foreland southern Pyrenees and the retro-foreland northern Pyrenees, where the inverted lower Cretaceous rift system is mainly preserved. Due to low overall convergence and absence of oceanic subduction, this orogen preserves one of the best geological records of early orogenesis, the transition from early convergence to main collision and the transition from collision to post-convergence. During these transitional periods major changes in orogen behavior reflect evolving lithospheric processes and tectonic drivers. Contributions by the OROGEN project have shed new light on these critical periods, on the evolution of the orogen as a whole, and in particular on the early convergence stage. By integrating results of OROGEN with those of other recent collaborative projects in the Pyrenean domain (e.g., PYRAMID, PYROPE, RGF-Pyrénées), this paper offers a synthesis of current knowledge and debate on the evolution of this immature orogen as recorded in the synorogenic basins and fold and thrust belts of both the upper European and lower Iberian plates. Expanding insight on the role of salt tectonics at local to regional scales is summarised and discussed. Uncertainties involved in data compilation across a whole orogen using different datasets are discussed, for example for deriving shortening values and distribution.

The Alps-Apennines Interference Zone: A Perspective from the Maritime and Western Ligurian Alps

In SW Piemonte the Western Alps arc ends off in a narrow, E-W trending zone, where some geological domains of the Alps converged. Based on a critical review of available data, integrated with new field data, it is concluded that the southern termination of Western Alps recorded the Oligocene-Miocene activity of a regional transfer zone (southwestern Alps Transfer, SWAT) already postulated in the literature, which should have allowed, since early Oligocene, the westward indentation of Adria, while the regional shortening of SW Alps and tectonic transport toward the SSW (Dauphinois foreland) was continuing. This transfer zone corresponds to a system of deformation units and km-scale shear zones (Gardetta-Viozene Zone, GVZ). The GVZ/SWAT developed externally to the Penninic Front (PF), here corresponding to the Internal Briançonnais Front (IBF), which separates the Internal Briançonnais domain, affected by major tectono-metamorphic transformations, from the External Briançonnais, subjected only to anchizonal metamorphic conditions. The postcollisional evolution of the SW Alps axial belt units was recorded by the Oligocene to Miocene inner syn-orogenic basin (Tertiary Piemonte Basin, TPB), which rests also on the Ligurian units stacked within the adjoining Apennines belt in southern Piemonte. The TPB successions were controlled by transpressive faults propagating (to E and NE) from the previously formed Alpine belt, as well as by the Apennine thrusts that were progressively stacking the Ligurian units, resting on the subducting Adriatic continental margin, with the TPB units themselves. This allows correlation between Alps and Apennines kinematics, in terms of age of the main geologic events, interference between the main structural systems and tectonic control exerted by both tectonic belts on the same syn-orogenic basin.

Unravelling the widening of the earliest Andean northern orogen: Maastrichtian to early Eocene intra‐basinal deformation in the northern Eastern Cordillera of Colombia

AbstractThe onset of deformation in the northern Andes is overprinted by subsequent stages of basin deformation, complicating the examination of competing models illustrating potential location of earliest synorogenic basins and uplifts. To establish the width of the earliest northern Andean orogen, we carried out field mapping, palynological dating, sedimentary, stratigraphic and provenance analyses in Campanian to lower Eocene units exposed in the northern Eastern Cordillera of Colombia (Cocuy region) and compare the results with coeval succession in adjacent basins. The onset of deformation is recorded in earliest Maastrichtian time, as terrigenous detritus arrived into the basin marking the end of chemical precipitation and the onset of clastic deposition produced by the uplift of a western source area dominated by shaly Cretaceous rocks. Disconformable contacts within the upper Maastrichtian to middle Palaeocene succession document increasing supply of quartzose sandy detritus from Cretaceous quartzose rocks exposed in eastern source areas. The continued unroofing of both source areas produced a rapid shift in depositional environments from shallow marine in Maastrichtian to fluvial‐lacustrine systems during the Palaeocene‐early Eocene. Supply of immature Jurassic sandstones from nearby western uplifts, together with localized plutonic and volcanic Cretaceous rocks, caused a shift in Palaeocene sandstones composition from quartzarenites to litharenites. Supply of detrital sandy fragments, unstable heavy minerals and Cretaceous to Ordovician detrital zircons, were derived from nearby uplifted blocks and from SW fluvial systems within the synorogenic basin, instead of distal basement rocks. The presence of volcanic rock fragments and 51–59 Ma volcanic zircons constrain magmatism within the basin. The Maastrichtian–Palaeocene sequence studied here documents crustal deformation that correlates with coeval deformation farther south in Ecuador and Peru. Slab flattening of the subducting Caribbean plate produced a wider orogen (>400 km) with a continental magmatic arc and intra‐basinal deformation and magmatism.

Determining kinematic order and relative age of faulting via flexural‐kinematic restoration: A case study in far western Nepal

AbstractForward modeled, balanced cross sections that account for the flexural response to thrust loading and erosional unloading can verify and refine the kinematic sequence of deformation in fold‐thrust belts as well as help assess the validity of a balanced cross section. Results from flexural‐kinematic reconstructions that indicate either the cross section, the kinematic order or both are invalid include: (a) a predicted final topography that is dramatically different from the actual topography; (b) large normal fault or thrust fault bounded synorogenic basins that are not present in the mapped geology; and/or (c) an exhumation history that is not consistent with provenance records in the basin or measured thermochronometers. Where detailed measured foreland basin sections exist, flexural‐kinematic modeling of fold‐thrust belt deformation, including out‐of‐sequence (OOS) faults can predict a foreland basin evolution that can be compared to measured data. The modeling process creates a “pseudostratigraphy” in the modeled foreland. The pseudostratigraphy and predicted provenance of each modeled stratigraphic increment can be directly compared to measured stratigraphic sections. We present a case study using two cross sections through the Himalaya of far western Nepal (Api and Simikot) to assess the validity of the section geometries and the resulting kinematic histories, displacement rates, flexural wave response and predicted provenance for both sections. Insights from combining the flexural‐kinematic models with existing stratigraphic data include: (a) Changing the order of proposed OOS and normal faults to earlier in the evolution of the fold‐thrust belt was necessary to reproduce the foreland provenance data. We argue that OOS thrust and normal faults in the Api section occurred between 11 and 4 Ma. (b) Published shortening estimates for the Simikot cross section are too high (>50 km), resulting in unrealistic shortening rates up to 80 mm/yr between 25 and 20 Ma. (c) Flexural forward models with and without an additional sediment loading modeling step indicate that while sediment loading does not have a measurable effect on the magnitude and location of erosion within the fold‐thrust belt, it does have a small effect on accumulation rates and thus the predicted age of stratigraphic boundaries when compared to measured stratigraphic thicknesses and age. Thickness difference range from 0.2 to 0.5 km and can result in predicted age differences of ca. 1 Ma. Accounting for both flexural isostacy and erosion can eliminate unviable kinematic sequences and when combined with provenance data from measured stratigraphic sections, can provide insight into the order, age and rate of deformation.

Understanding Structural Style of Onshore Timor Basin from Detailed Fieldwork

Hydrocarbon exploration in Eastern Indonesia region is mainly concentrated in the related convergent area such as Timor Basin. This area is characterized by the development of complex imbricate thrust-fold-belt deformation involving sedimentary sequence from the Australia continental margin. However, the exploration has not been successfully found the potential economic reserve. Our study utilized extensive and detailed fieldwork campaign  presents the structural style on the onshore region of the Timor Basin. Thick-skinned and thin-skinned thrust faults are both presents in West Timor area divided by the syn-orogenic basin. The change in decolement surface is likely to be caused by inversion structures under the thrust sheets. Our present interpretations indicate that these inversion anticlines structure are likely to occur both onshore and offshore.

Evidence for an Early Silurian Synorogenic Basin Within the Metamorphic Hinterland of the North Atlantic Caledonides: Insights From the U‐Pb Zircon Geochronology of the Funzie Conglomerate, Shetland, Scotland

AbstractThe spectacular kilometer‐thick Funzie Conglomerate is a deformed and metamorphosed high‐energy sedimentary deposit that occurs in Shetland (Scottish Caledonides). Its age and tectonic significance in relation to Early Ordovician (485–475 Ma) and Late Ordovician (450–445 Ma) accretionary orogenic events and the culminating Silurian (430–425 Ma) continental collision and closure of the Iapetus Ocean have hitherto been unknown. U‐Pb zircon dating indicates that the clast population of the conglomerate was derived from easterly sources comprising Neoproterozoic metasedimentary rocks and the northern extension of the Ordovician‐Silurian Midland Valley Arc that formed during Iapetus closure. A lower age limit of 440 Ma is indicated by the ages of the youngest matrix detrital zircon grains and the youngest granitic clast. Deformation and metamorphism of the conglomerate is attributed to sinistrally oblique extension at ca. 430 Ma that excised at least 10 km of crustal section. Sedimentation of the conglomerate is therefore constrained to a 10‐myr time span (440–430 Ma). The tectonic setting is interpreted as a synorogenic basin that received detritus from, and was buried by, advancing thrust nappes during the Early Silurian collision of Laurentia and Baltica. Tectonic burial was followed rapidly by ductile deformation during oblique extensional unroofing of the metamorphic pile and accounts for preservation of the Funzie Conglomerate as a rare example of a synorogenic basin within the metamorphic hinterland of the North Atlantic Caledonides.

A petrochronological approach for the detrital record: Tracking mm-sized eclogite clasts in the northern Canadian Cordillera

Sutures recording the accretion history of the Canadian Cordillera terranes are poorly preserved. The Whitehorse trough syn-orogenic basin formed during early Mesozoic terrane accretion at the western margin of Laurentia and contains a ∼300 m thick horizon that includes eclogite clasts possibly sourced from a suture zone. By applying petrochronological micro-analytical techniques to the mm-diameter eclogite clasts, including thermobarometry and in situ rutile thermochronology, as well as detrital zircon geochronology and thermal diffusion modeling, we constrain a source-to-sink path for the clasts. The eclogite clasts likely reached peak metamorphic conditions of 2.2–2.9 GPa and ≥800 °C, cooled through Pb closure in rutile during Early Jurassic at ≥610 °C and were deposited into the basin by latest Pliensbachian/earliest Toarcian. This history implies minimum mean cooling and exhumation rates on the order of ∼38 °C/myr and ∼4.1 km/myr, respectively, consistent with rates reported for subduction-related eclogite worldwide. We suggest the most likely source for the clasts is the suture between the Yukon–Tanana and Stikinia terranes, involving a latest Triassic collision, followed by rapid Early Jurassic exhumation of the lower plate Yukon–Tanana terrane, either by buoyant extrusion or in a plate boundary zone metamorphic core complex. Our study demonstrates that micro-analytical techniques used for petrochronology can be applied to very small lithic clasts in the sedimentary record towards the tectonic reconstruction of accretionary orogens.

Provenance shift from a continental margin to a syn-orogenic basin in the Neoproterozoic Araxá nappe system, southern Brasília belt, Brazil

In the southern Brasília belt of central Brazil, prominent east-verging systems of stacked nappes caused the thrusting and tectonic interleaving of metasedimentary rocks of different provenance, age and metamorphism. Detrital zircon U-Pb analysis of metasedimentary rocks of the Araxá Group show very distinct age spectra and provenance patterns for samples collected in different sites of the Brasília belt. While samples collected in the external zone of the belt yielded zircon age peaks mainly from 790 Ma to 2.5 Ga, samples of the internal zone of the belt, close to the Goiás Magmatic Arc, yielded important age peaks around 650 Ma. This suggests an important provenance shift recorded by the metasedimentary rocks of the Araxá nappe system. The lower and easternmost rocks might represent the western passive margin of the São Francisco paleocontinent, and thus are correlated to the Canastra Group, while the upper and westernmost rocks show a striking influence of the late Cryogenian (ca. 650 Ma) continental magmatic arc of the Brasília belt, and thus were probably deposited in a syn-orogenic basin. The variability of source areas is also recorded by distinct Sm-Nd TDM ages, between 1.4 Ga and 2.0 Ga, and 87Sr/86Sr ratios from 0.719 to 0.891. Low-grade metasedimentary rocks of the Ibiá Group in the Araxá nappe system show even younger detrital zircons, around 580 Ma, suggesting they were deposited after the metamorphic peak of the Brasília belt and represent the erosion of the thrust fronts during late-stage nappe extrusion and stacking. Therefore, the Araxá nappe system is actually composed of a tectonically interleaved package of metasedimentary rocks deposited in distinct basins during distinct evolutionary stages and, finally, assembled and metamorphosed during collisional thrusting. Recognizing such metasedimentary rocks that are petrographically similar but show distinct deposition timing, sediment source and tectonic setting is an important challenge to understand the evolution of the Brasília belt in the scenario of West Gondwana amalgamation.

Detrital zircon geochronology (U-Pb LA-ICP-MS) of syn-orogenic basins in SW Gondwana: New insights into the Cryogenian-Ediacaran of Porongos Complex, Dom Feliciano Belt, southern Brazil

The Dom Feliciano Belt represents the major geotectonic unit in southeastern South America, being part of the Neoproterozoic western Gondwana. The Porongos Complex comprises the southernmost Brazilian supracrustal sequence of this belt, overlying the Paleoproterozoic Encantadas gneiss (c. 2.2–2.0 Ga). Until recently, these rocks were traditionally interpreted as a single early Neoproterozoic (Tonian, c. 790 Ma) basin.Here we present new U-Pb detrital zircon ages for the Capané Antiform, located in the northern part of the Porongos Complex. The central sector, interpreted as a basement domain, shows both pronounced Paleoproterozoic (2.2–2.0 Ga) and Neoproterozoic (Tonian, 830–780 Ma) age peaks. The latter accounted for the rift-related Porongos succession that is tectonically imbricated with basement rocks. In contrast, metavolcano-sedimentary units from the eastern and western sectors reflect predominant Cryogenian-Ediacaran provenance (peaks at 615–580 Ma).This new detrital zircon signature challenges the traditional view of a single Neoproterozoic depositional episode for the Porongos Complex by implying two different sequences termed Porongos I and II of Tonian and Ediacaran ages, respectively. The Porongos I sequence is made up of mica schist from the central sector, showing Tonian maximum depositional ages. On the contrary, the younger volcano-sedimentary units of the two peripheral sectors display the Porongos II sequence deposited in a Cryogenian-Ediacaran basin. The Porongos I sequence may have evolved in an extensional setting as a marginal basin with rift-related units, whereas Porongos II formed during compression related to active thrusting, which resulted from the collision with the Pelotas Batholith.Therefore, the present age data combined with previously published geochronological, stratigraphic, and tectonic data sets identify the Capané Antiform as a key area to understand the tectonic evolution of the Porongos Complex. Its protracted evolution has recorded a tectonic history of more than 200 million years, lasting from the break-up of Rodinia to the Gondwana amalgamation.

Stratigraphic and tectonic control of deep-water scarp accumulation in Paleogene synorogenic basins: a case study of the Súľov Conglomerates (Middle Váh Valley, Western Carpathians)

Abstract The Súľov Conglomerates represent mass-transport deposits of the Súľov-Domaniža Basin. Their lithosomes are intercalated by claystones of late Thanetian (Zones P3 - P4), early Ypresian (Zones P5 - E2) and late Ypresian to early Lutetian (Zones E5 - E9) age. Claystone interbeds contain rich planktonic and agglutinated microfauna, implying deep-water environments of gravity-flow deposition. The basin was supplied by continental margin deposystems, and filled with submarine landslides, fault-scarp breccias, base-of-slope aprons, debris-flow lobes and distal fans of debrite and turbidite deposits. Synsedimentary tectonics of the Súľov-Domaniža Basin started in the late Thanetian - early Ypresian by normal faulting and disintegration of the orogenic wedge margin. Fault-related fissures were filled by carbonate bedrock breccias and banded crystalline calcite veins (onyxites). The subsidence accelerated during the Ypresian and early Lutetian by gravitational collapse and subcrustal tectonic erosion of the CWC plate. The basin subsided to lower bathyal up to abyssal depth along with downslope accumulation of mass-flow deposits. Tectonic inversion of the basin resulted from the Oligocene - early Miocene transpression (σ1 rotated from NW-SE to NNW-SSE), which changed to a transpressional regime during the Middle Miocene (σ1 rotated from NNE-SSW to NE-SW). Late Miocene tectonics were dominated by an extensional regime with σ3 axis in NNW-SSE orientation.

Cenozoic exhumation in the Qilian Shan, northeastern Tibetan Plateau: Evidence from detrital fission track thermochronology in the Jiuquan Basin

AbstractThe India‐Asia collision resulted in the Cenozoic framework of faults, ranges, and tectonic basins and the high topography of the northeastern Tibetan Plateau, but how and when these features formed remains poorly understood, leading to conflicting tectonic models. However, information on the tectonic evolution of these active orogenic belts is well preserved in synorogenic basin sediments. In this study, we carefully analyze the detrital apatite fission track ages of Cenozoic synorogenic sediments from the Jiuquan Basin to decipher the entire exhumation process of the adjacent Qilian Shan throughout the Cenozoic. Our data indicate that initially rapid Cenozoic exhumation occurred in the Qilian Shan during the late Paleocene‐early Eocene (~60–50 Ma), almost synchronous with the India‐Asia collision. The Qilian Shan subsequently experienced long‐lived exhumation that continued until at least the middle Miocene (~45–10 Ma). During this period of exhumation in the Qilian Shan, tectonic deformation occurred throughout the northeastern Tibetan Plateau. The early Cenozoic deformation in the northeastern Tibetan Plateau may have been caused by the transfer of tectonic stress from the distant India‐Asia collision boundary through the complex lithospheric environment of the Tibetan Plateau. The present tectonic configuration and topography of the Qilian Shan and the northeastern Tibetan Plateau likely became established since the middle Miocene and after the long‐lived deformation began in the early Cenozoic.

Reconciling regional continuity with local variability in structure, uplift and exhumation of the Timor orogen

Along-strike variations in orogenic development can be difficult to constrain. Resulting assumptions projecting similarity or variability along strike can lead to erroneous conclusions at the orogen scale. Young orogens provide opportunities to document limits of along-strike projection and test factors that may control lateral variability. Here we present new constraints on the history of uplift, exhumation and shortening in the Timor orogen from West Timor, Indonesia. Structural mapping documents a foreland thrust stack of Jurassic-Miocene Australian margin strata and a hinterland antiformal stack of Permo-Triassic Australian continental units duplexed below Banda Arc lithosphere. Biostratigraphy within the piggyback Central Basin reveals earliest deepwater synorogenic deposition at 5.57–5.53Ma, uplift from lower to middle bathyal depths at 3.35–2.58Ma, and uplift from middle to upper bathyal depths at 2.58–1.30Ma. Hinterland Permo-Triassic strata yield apatite (U-Th)/He ages of 0.33–2.76Ma, apatite fission track ages of 2.19–3.53Ma and partially reset zircon (U-Th)/He ages. These thermochronology ages are youngest or most strongly reset in the center of the antiformal stack and yield modeled exhumation rates of 0.45–3.31km/Myr. A balanced cross section reveals a minimum of 300km of shortening including 210km of Australian continental subduction below the Banda forearc. When compared to published results from Timor-Leste, these data show that the timing of initial collision, synorogenic basin uplift, and total shortening amount were broadly similar across the island. Therefore, despite along-strike changes in orogen morphology and significant small-scale spatial variability in deformation, first-order structural similarity dominates at large scales. We suggest that along-strike variations in orogen morphology are due to changes in the distribution of deformation within the orogen driven by differences in backstop strength, internal wedge strength and basal décollement friction as well as the presence of the wedge-top Central Basin in West Timor.

Tonian to early Cryogenian synorogenic basin of the São Gabriel Terrane, Dom Feliciano Belt, southernmost Brazil

ABSTRACTA provenance and stratigraphic study of the Neoproterozoic Pontas do Salso Complex (PSC), western portion of the Dom Feliciano Belt (DFB), was conducted with U–Pb zircon geochronological analysis of the metasediments and the host rocks. The U–Pb isotopic data from detrital zircon of the metasediments indicate the source from the latest Middle Tonian to Late Cryogenian (between 897 and 684 Ma) and maximum depositional age of 685 ± 18 Ma in an arc-related basin setting adjacent in the Sao Gabriel Arc. The metasediments of the PSC form an elongated body in the N35°E direction and occur in the central portion of the São Gabriel Terrane (SGT), which is constituted by ophiolitic complexes and arc-related rocks, generated probably during the final consolidation of Rodinia supercontinent, although this question is still open. Low- to medium-K calc-alkaline, metaluminous affinity, and trace-element geochemistry suggest that the chemical composition of the protoliths was generated from metasomatized mantle sources in subduction zones. The PSC is composed of meta-arkoses, with subordinate metaconglomerates and metapelites. The meta-arkoses are disposed in plane-parallel layers, which also internally feature small-scale cross-bedding structures. The matrix has a blastopsammitic, poorly selected, fine to coarse texture, and hexagonal quartz and plagioclase porphyroclasts with superimposed thermal metamorphism. The polymict metaconglomerates are matrix-supported, with 15–55% of clasts of metavolcanic rocks, metasediments, undeformed granites, and quartz veins. The metapelites comprise mainly muscovite phyllites with syn-tectonic garnet and chloritoid porphyroblasts. The PSC represents a sedimentary succession deposited on an arc-related basin formed during the collapse and uplift of the SGT.