Synkinematic Sedimentation Research Articles

Deformation, evolution and controls of halokinetic megaflaps driven by vertically-stacked and laterally-shifting depocenters

Megaflaps comprise steeply dipping to overturned panels of the oldest suprasalt strata flanking steep diapirs, and represent the roofs of early inflated salt. These large-scale structures result from salt-sediment interaction at minibasin scales and entail multiple kilometres of folding and vertical relief. They are divided into two end-member types (halokinetic and contractional) and form by some combination of limb rotation and kink-band migration. They can be difficult to image and interpret adjacent to flaring diapirs and beneath allochthonous salt due to steep bedding dips and suboptimal illumination.Using physical models, we investigate halokinetic megaflaps driven by differential loading. Models with vertically-stacked vs. laterally-shifting loading above a prekinematic layer have been run to determine the main processes and mechanisms controlling the growth and kinematic evolution of megaflaps. Parameters such as the thickness of the prekinematic cover, the width of the proto-salt wall, the synkinematic sedimentation rate, and variations in the mechanical properties of the prekinematic cover have been tested to evaluate their role in megaflap generation. The experimental results demonstrate that in absence of tectonic forces, halokinetic megaflaps are generated by a combination of 1) an early increase of pressure-head gradient between two adjacent minibasins with different rates of sedimentation and subsidence, and 2) the disappearance of this gradient that occurs when welding occurs beneath the more quickly subsiding minibasin. The geometry, kinematic evolution, and degree of small-scale deformation of the megaflaps in our analogue models are consistent with both exposed (e.g., Paradox Basin) and seismically imaged halokinetic megaflaps (e.g., deepwater northern Gulf of Mexico).

Post-salt carbonates control salt-tectonic minibasin formation

Abstract Salt tectonics on passive margins are driven by sediment loading and gliding with minimal influence from basement-involved tectonics and is associated with variable and complex salt structures, such as minibasins and diapirs. A major enigma in salt tectonics is the origin of load-driven diapir-flanked minibasins, synclinal depocenters formed by localized subsidence of synkinematic sediments into salt. How can less-dense clastic sediments sink into the denser salt, promoting diapirism at their flanks? We use two-dimensional numerical modeling of lithospheric extension including syn- and post-rift sedimentation to understand the evolution of salt-tectonic minibasins along rifted passive margins. Our results show that these minibasins are driven by deposition of dense early post-salt carbonates and then amplified during progradation of less-dense and compacting clastics. In contrast, basin-scale salt flow driven by clastic progradation alone, without deposition of early post-salt carbonates, does not produce minibasins as observed on salt-bearing passive margins.

A Snapshot of the Earliest Stages of Normal Fault Growth

Observations of how faults lengthen and accrue displacement during the very earliest stages of their growth are limited, reflecting the fact that the early syn-kinematic sediments that record this growth are often deeply buried and difficult to image with geophysical data. Here, we use borehole and high-quality 3D seismic reflection data from SW Barents Sea, offshore Norway to quantify the lateral propagation (c. 0.38 – 3.4 mm/year) and displacement accumulation (c. 0.0062 – 0.025 mm/year) rates (averaged over 6.2 Myr) for several long (up to 43 km), moderate displacement (up to 155 m), syn-kinematic faults that we argue provide a unique, essentially ‘fossilised’ snapshot of the earliest stage of fault growth. We show that lateral propagation rates were up to 300 times faster than displacement rates during the initial ~25% of fault lifespan, suggesting that these faults lengthened much more rapidly than they accrued displacement. Our inference of rapid lengthening is also supported by geometric observations including: (i) low Dmax/Lmax (<0.01) scaling relationships, ii) high (>5) length/height aspect ratios, iii) broad, bell-shaped throw-length profiles, and iv) hangingwall depocenters forming during deposition of the first seismically detectable stratigraphic unit spanning the length of the fault. We suggest that the high ratio between lateral propagation rate and displacement rate is likely due to relative immaturity of the studied fault system, an interpretation that supports the ‘constant-length’ fault growth model. Our results highlight the need to document both displacement and lateral propagation rates to further our understanding of how faults evolve across various temporal and spatial scales.

Allochthonous salt advance recorded by the adjacent syn-kinematic sedimentation: Example from the Les Avellanes diapir (South Central Pyrenees)

Allochthonous salt advance recorded by the adjacent syn-kinematic sedimentation: Example from the Les Avellanes diapir (South Central Pyrenees)

Identification of Quaternary alluvial-fan deposits (Rügen, SW Baltic Sea): Significance for recognition of syn-kinematic sedimentation in glacitectonic complexes

We present a detailed study of an alluvial fan accumulated in a piggyback basin syn-kinematically to the emergence of a Weichselian glacitectonic complex (Jasmund peninsula, SW Baltic Sea). Although sediments formed contemporaneously with glacitectonic events have already been documented, a systematic approach is missing so far. Facies, architecture and distribution of alluvial-fan deposits are identified here as key features for analyzing glacitectonic complexes.The deposition of those syn-kinematic deposits was controlled by the progradation of thrust-faults and the resulting morphologic changes of both the thrust-bounded ridges and the adjacent piggyback basins. Another controlling factor is the episodic high runoff of meltwater discharge (glacial lake outburst flood, jökulhlaup) from lakes near the ice front. Sheetflood and debris-flow processes dominated the sedimentation and gave way to alluvial-fan, fan-delta and glacifluvial deposits. A stepwise rotation of the depositional plain within the piggyback basin is indicated by internal unconformities and the distinct converging stratal geometry. Based on three luminescence ages the development of the syn-kinematic alluvial-fan sequence and consequently of the glacitectonic complex took place between 21 and 19 ka during a late Weichselian readvance of the Scandinavian Ice Sheet. The overall results are summarized in a seven-stage genetic model, beginning with the initial glacitectonic phase and ending with the overfilled piggyback basin and subsequent overriding of the structure by the glacier front. With the presented criteria, the successive growth of the alluvial-fan deposits can be linked directly with the emergence of a glacitectonic complex formed during an ice advance.

Structural architecture and tectonic evolution of Haimour block, Gulf of Aqaba, Egypt: An example of multiphase deformed stepover

A unique outcrop of a dilational NNE-oriented stepover takes place between two left-stepping NE sinistral faults at the Haimour block along the western margin of the Gulf of Aqaba basin. Detailed surface geological mapping was achieved in order to unravel structural architecture and deformation style of the Haimour stepover (HSO). The HSO comprises N- to NNE- oriented transtensional and normal faults that affect all the sedimentary succession including the syn-kinematic sediments. Contrarily, the southern part includes a remarkable push-up structure that comprises NNE-to NE-oriented compressional structures affecting the Upper Cretaceous rock units. The southern end of the HSO is marked by a NNE-oriented Principal Displacement Zone (PDZ), which encloses NNE- and NE-oriented sinistral faults. Structural analysis of field data considering the previous analogue and numerical models indicates a well-developed basin side-walls and basin cross-fault zone of the HSO. Additionally, divergent-oblique slip model (30° transtension) is suggested for the HSO. The proposed tectonic model of the HSO revealed that the initiation of the pull-apart basin took place during the Oligocene times concurrently with the opening of the Red Sea rift and continued to the Post-Miocene times. The outcomes of this study provide a model for architecture and evolution of similar structural style along Gulf of Aqaba and Dead Sea Transform. Moreover, the proposed architecture of the HSO should provide an analogue for subsurface mapping and exploration at strike-slip zones.

Influence of Regional Erosion and Sedimentary Loading on Fault Activities in Active Fold-Thrust Belts: Insights From Discrete Element Simulation and the Southern and Central Longmen Shan Fold-Thrust Belt

Four groups of discrete element models (DEMs) were set-up to simulate and analyze the influence of regional erosion and sedimentary loading on the formation and spatial-temporal evolution of faults in the southern and central Longmen Shan (LMS) active fold-thrust belt. The interior characteristics of faults in the southern and central LMS fold-thrust belt were also evaluated during the interaction of tectonic processes and surface processes according to the stress-strain analysis from DEM results. The results showed that synkinematic erosion promoted the reactivation of pre-existing faults in thrust wedges and also retarded the formation and development of new incipient faults in the pre-wedge regions. Meanwhile, synkinematic sedimentation also delayed the development of new incipient faults in the pre-wedge regions by promoting the development of thrust faults in the front of thrust wedges, causing these thrust wedges in supercritical stages with relatively narrow wedge lengths. According to these DEM results, we infer that: 1) The characteristics of erosion and sedimentation in the central and southern LMS have important influences on the activities of large faults which are extended into the deep detachment layer; 2) Besides differential erosion, the differential sedimentary loading may also be one of the important factors for the along-strike differential evolution of the LMS fold-thrust belt. This kind of differential deposition may lead to differential fault activity and uplift in the interior thrust wedge and pre-wedge region in the central and southern LMS; 3) Compared to the northern LMS, the central LMS and southern LMS is more conducive to the occurrence of earthquakes, because of synkinematic sedimentation (such as the growth of Chengdu plain) has a greater blocking effect on the stress propagation and strain convergence on the fault planes of front faults of an active thrust wedge.

Characterization of the accommodation zones along restraining and releasing bends from analogue modelling simulating the seagap fault, off-shore Tanzania

The study aims to understand geometry and evolution of accommodation zones along restraining and releasing bends in strike slip systems which is often complex and characterized by sharp change in polarity, resulting in a difficult characterization of traps location. A batch of sandbox modelling experiments was performed using a layered scaled sand material. The setup parameters of the wooden baseplates used in the first two experiments (SS1 and SS2) are basement offset of 6.5 cm/3 cm, 90°/90° stepovers in releasing and restraining bends of total 96 cm length and 25 cm width. The third experiment (SS3) was performed with basement offset of 6.5 cm/3 cm, 156°/126° stepovers in releasing and restraining bends of total 96 cm length and 25 cm width. The experiments were performed with special attention to the role of syn-kinematic sedimentation and the pre-existing structure of the basement. A sequence of pop-up and pull-apart structures was produced. Along the main structures, complex fault trend was compatible with a sinistral riedel distribution and a counterclockwise rotation of pre-existent elements. Change of fault's polarity at depth and dip direction flipping of high angle faults in accommodation zones were clearly observed. Even more, progressive propagation of the pop-up structures produces a spectacular inversion of adjacent extensional structures. Comparing results of the model with the Seagap fault zone, it is possible to put in evidence similar fault orientation and distribution. Internal structures developed were strongly influenced by syn-kinematic sedimentation as observed by characteristic helicoidal shape of growth faults. The analogue models clearly describe how boundary faults of the pull-apart basin along a paired bend, initially characterized by a normal kinematic can be subsequently inverted in the later stages, which can potentially have a strong impact on the petroleum system.

Syn-kinematic sedimentation between ice margin-parallel thrust-bounded ridges of the Glacitectonic Complex of Jasmund (Rügen Island, SW Baltic Sea, Weichselian)

Piggyback basins are common and well-studied features of thrust belts, but they are also known to form in front of advancing ice sheets. However, these glacitectonically developed basins and their syn-glacitectonic fillings have so far received little attention. Here, we present a detailed study of a cliff section on Jasmund peninsula, SW Baltic Sea, where syn-kinematic deposits of Late Weichselian age (MIS2) accumulated in a piggyback basin. Sedimentological analyses, including micromorphology and field studies, resulted in a distinction of at least five tectono-depositional sequences of syn-glacitectonic basin fills. The sediment record indicates a stepwise evolution of the basin, controlled by propagating thrust faults and the resulting thrust-bound ridge morphology. A fast-changing depositional environment with glacifluvial, glacilacustrine, alluvial fan and fan delta depositional systems, show a rapid transformation of the overall morphology of the study area. The main controlling factors are the propagating thrust faults (determining anticline and syncline orientations) and the advancing ice margin, which caused sudden changes or even temporal obstruction of the meltwater drainage system. The proposed stages of basin evolution illustrate the dynamic formation and stepwise syn-tectonic fill of piggyback basins in glacitectonic complexes. Our evolutionary model will increase our understanding of basin fills on glacitectonic thrust- and fold-belts that were formed by approaching ice sheets in ice-marginal settings.

Salt tectonics and controls on halokinetic-sequence development of an exposed deepwater diapir: The Bakio Diapir, Basque-Cantabrian Basin, Pyrenees

This work evaluates growth strata adjacent to the Bakio Diapir in the Basque Pyrenees, aiming to discuss the application of halokinetic-sequence concepts, mainly developed in shallow-water to subaerial environments, to deepwater depositional settings. This is one of the few exposed passive diapirs developed in deepwater environments, with both synkinematic carbonate and siliciclastic strata. Thus, considering that large hydrocarbon producing areas are located in salt provinces developed in deepwater environments, this study is of interest not only to researchers in salt tectonics, but also to industry geoscientists focusing on hydrocarbon exploration and production. We present a 3D analysis of this outstanding salt structure by integrating detailed geological cartography, high-resolution bathymetry, seismic, and well data. The resulting reconstruction enables us to trace the extent of the diapir offshore and decipher its evolution from its formation as a salt wall developed above the overlap of two basement-involved faults until its squeezing during the Pyrenean compression. But more significantly, it allows us to discern the roles played by bathymetry, subsidence, and sedimentation type in the configuration of halokinetic sequences developed in deepwater environments. Thus, our study shows that: 1) the geometry of halokinetic sequences is defined by the thickness of the roof edges, the dip of the salt-sediment interface in the limbs of the active drape fold, and the onlap angle of the synkinematic sediments over the salt; 2) the roof thickness is controlled not only by the ratio between salt-rise and regional sediment-accumulation rate, but also by the water depth of the diapir roof and the depositional environment that can promote vertical aggradation of a supra-diapir carbonate buildup; and 3) high surface slopes and consequent debrites are not exclusive to, and characteristic of, hook halokinetic sequences and tabular composite halokinetic sequences.

Geochronology, sedimentology and paleosol analysis of a Miocene, syn-orogenic, volcaniclastic succession (La Pava Formation) in the north Patagonian foreland: Tectonic, volcanic and paleoclimatic implications

The initial infill of the Patagonian Broken Foreland is related to Miocene, syn-orogenic, volcaniclastic successions accommodated in intermontane basins. In the last years several works have paid attention to these successions due to their role in the comprehension of the timing of deformation, the relationship between arc-volcanism and the environmental signals, and the climate changes related to the growth of the orogen. In this paper we perform the U-Pb geochronology and the sedimentologic and paleosols analyses of a Miocene, syn-orogenic, volcaniclastic succession (La Pava Formation) located at the northern part of Patagonian Broken Foreland. The results indicate that the syn-kinematic sedimentation (evidenced by growth strata and progressive unconformities) proceeded between ~19 Ma to ~14 Ma, associated with arc-derived volcaniclastic deposits, under alluvial conditions with profuse paleosols development. The facies analysis combined with the paleosols and provenance studies indicate episodic and cyclic supply of pyroclastic materials, which were mainly delivered from the catchment area of the system, affected by explosive volcanism. A succession of stacked paleosols was recorded into 3 sections, bounded by unconformities, which record from Alfisols-like, Vertisol-like to Andisols-like paleosols. Paleosols variations were related to the effects of tectonic events, climate changes or to the increase of volcanic supply in comparison to soil-forming processes. The results obtained in this work are considered substantial to unravel the tectonic, volcanic and paleoclimatic framework of the North Patagonian Andes.

Growth of triangle zone fold-thrusts within the NW Borneo deep-water fold belt, offshore Sabah, southern South China Sea

AbstractThe NW Borneo deep-water fold-and-thrust belt, offshore Sabah, southern South China Sea, contains a structurally complex region of three to four seafloor ridges outboard of the shelf-slope break. Previous studies have suggested the seafloor ridges formed either above shale diapirs produced by mass movement of overpressured shales (i.e., mobile shale) or above an imbricate fold-and-thrust array. Here, we performed tectonostratigraphic analyses on a petroleum industry three-dimensional (3-D) seismic volume that imaged the full growth stratal record. We show fold growth history, deformation styles, along-strike structural variabilities, and synkinematic sedimentation during triangle zone–style fold growth. Nine seismic horizons within growth strata were mapped and correlated to petroleum industry seismostratigraphy. Synkinematic sedimentation interactions with growing folds and near-surface strains were analyzed from seismic attribute maps. We interpret that the seafloor structures were formed by imbricate thrusts above multiple detachments. We estimate ∼8 km minimum shortening since the late Miocene ca. 10 Ma. The folds show oversteepened fold forelimbs, back-rotated backlimbs, and forward-vergent (NW to NNW) “blind” thrust ramps that terminate within the growth strata. Fold cores show evidence of internal shear. Immature folds show detachment fold geometries, whereas mature folds show forelimb break thrusts, type I triangle zones, and rotated forward-vergent roof thrusts. Thrust linkages spaced ∼10 km apart were exploited as thrust top synkinematic sedimentation pathways; the linkages also partition near-surface strains. Our comprehensive, three-dimensional documentation of triangle zone fold growth and sedimentation in a deep-water fold belt highlights internal shear, multiple detachments, and opposite thrust vergence; mobile shales are not required to explain the deformation.

Syn-kinematic strata influence the structural evolution of emergent fold–thrust belts

Abstract Whether thrusts are ramp-dominated and form imbricate fans or run out onto the syn-orogenic surface, forming ‘thrust-allochthons’, is governed by the activity of secondary ‘upper’ detachments along the syn-orogenic surface, activations of which are inhibited by syn-kinematic sedimentation at the thrust front. In the northern Apennines, where thrust systems are ramp-dominated and form an emergent imbricate fan, syn-kinematic sedimentation was abundant and accumulated ahead and above each thrust. In the southern Apennines, the far-travelled Lagronegro allochthon achieved its high displacements (>65 km) while the foredeep basin received little sediment. The imbricate fan at the front of the main Himalayan arc developed within a foredeep that experienced high rates of syn-kinematic sedimentation. In contrast, further west, the Salt Range Thrust emerged into a distal, weakly developed foredeep with significantly reduced rates of sediment accumulation. Displacements were strongly localized onto this thrust (c. 25 km displacement) which activated an upper detachment along the syn-orogenic surface. It is an arrested thrust-allochthon. Lateral variations into the adjacent, ramp-dominated but still salt-detached, Jhelum fold-belt are marked by increases in syn-kinematic sedimentation. As sedimentation styles can vary in space and time, individual thrusts and thrust systems can evolve from being allochthon prone to imbricate dominated.

Influence of Syntectonic Sedimentation and Décollement Rheology on the Geometry and Evolution of Orogenic Wedges: Analog Modeling of the Kuqa Fold‐and‐Thrust Belt (NW China)

AbstractContractional deformation in the outer parts of fold‐and‐thrust belts is in part controlled by the presence of syntectonic sediments and multiple décollements (e.g., the Apennines, the Appalachians, the Pyrenees, the Zagros, or the Sub‐Andean and Kuqa fold‐and‐thrust belts). To better understand the influence of these parameters in the kinematic evolution of fold‐and‐thrust systems, we carried out an experimental study including four 3‐D sandbox models inspired by one of the previously mentioned prototypes, the Kuqa fold‐and‐thrust belt. This belt contains two décollements: a weak synorogenic salt layer and a deeper, preorogenic, and frictionless décollement (i.e., organic‐rich shales) showing along strike variations of rheology. The experimental results show that increasing synkinematic sedimentation rate (i) generates a progressive change from distributed to localized deformation and (ii) delays the development of frontal contractional structures detached on the salt, favoring the formation and reactivation of more hinterland thrusts and backthrusts. With respect to the rheology, our study reveals that as the viscosity of the prekinematic décollement increases, (i) the deformation propagates more slowly toward the foreland, and (ii) the underlying thrust stack becomes broader and lower and has a gentler thrust taper angle. The rheology of the prekinematic décollement defines the distribution and geometry of the structures detached on it that in turn influence the development of overlying, salt‐detached structures. Subsalt structures can (i) determine the areal extent of the salt and therefore of any fold‐and‐thrust system detached on it and (ii) hamper or even prevent the progressive foreland propagation of deformation above the salt.

Analogue modeling of large-transport thrust faults in evaporites-floored basins: Example of the Chazuta Thrust in the Huallaga Basin, Peru

The Huallaga Basin is a deformed foreland basin located in North Peru. The basin comprises several syntectonic depocenters. The most significant is the Biabo Syncline located at the back of the Chazuta Thrust, a long, flat-floored thrust detaching on an evaporitic décollement, which has accommodated more than 40 km of horizontal displacement. The hangingwall of the Chazuta Thrust has remained remarkably intact with little or no internal deformation and has incorporated a large volume of evaporites at its base.In order to unravel the formation and evolution of this thrust, we conducted a series of physical experiments that tested the role of various parameters. The goal is to investigate a system in which most of the deformation is accommodated in the frontal part of the chain (Chazuta Thrust), whereas deformation of the thrust sheet itself remains minor.Results from our experimental investigations suggest that the three key parameters that have allowed for such a long-lived, large-slip frontal thrust to operate are (1) the wedge-shaped syn-kinematic sedimentation, (2) the presence of the Biabo Syncline, which acted as a bulldozer pushing the evaporites forward, forcing their distal inflation and (3) the erosion at the front that favored farther advance of the frontal thrust, dragging passively large volumes of evaporites along with it.

Weld kinematics of syn-rift salt during basement-involved extension and subsequent inversion: Results from analog models

Scaled analog models based on extensional basins with synrift salt show how basement topography exerts a control factor on weld kinematics during the extension and inversion phases. In the case of basement-involved extension, syn-rift salt thickness differences may lead to variable degrees of extensional decoupling between basement topography and overburden, which in turn have a strong impact on the development of salt structures. With ongoing extension and after welding, the basin kinematics evolves toward a coupled deformation style. The basin architecture of our experimental results record the halokinetic activity related to growing diapirs and the timing of weld formationduring extension. Moreover, the structures that result from anysubsequent inversion of these basins strongly depends on the inherited welds and salt structures. While those basins are uplifted,the main contractional deformation during inversion is absorbed by the pre-existing salt structures, whose are squeezed developing secondary welds that often evolve into thrust welds. The analysis of our analog models shows that shortening of diapirs is favored by: i) basement topography changes that induce reactivation of primary welds as thrust welds; ii) reactivation of the salt unit as a contractional detachment and iii) synkinematic sedimentation during basin inversion. Finally, in this article, we also compare two natural examples from the southern North Sea that highlight deformation patterns very similar to those observed in our analog models.

From axial parallel to orthogonal groundwater flow during fold amplification: insights from carbonate concretion development during the growth of the Quattro Castella Anticline, Northern Apennines, Italy

This paper is based on a multidisciplinary field and laboratory study of carbonate concretions developed in poorly lithified Quaternary, syn-kinematic sediments along the Quattro Castella Anticline, Northern Apennines, Italy. The studied concretions consist of both tabular (parallel to bedding) and elongate single to coalescent concretionary bodies oriented at different angles to the bedding throughout the exposed stratigraphic succession. The dimensions of the concretions range from a few centimetres for single elongate concretions up to several metres for tabular to coalescent concretions. Field observations and petrophysical data indicate that the concretions developed preferentially in sediments characterized by mean grain sizes of 90–290 μm and a permeability ranging from 7 × 10 2 to 7 × 10 4 mD. Carbon and oxygen stable isotope analyses in conjunction with the petrographic investigations indicate that the precipitation of concretionary calcite occurred in a meteoric vadose realm during early eogenesis and subsequently in a meteoric phreatic environment. Diagenetic data and concretion patterns in syn-tectonic sediments suggest they formed during the lateral propagation of the anticline, which, in turn, promoted a change in the local topographic–hydraulic gradient from fold axial parallel to fold orthogonal. The integrated analysis of carbonate concretions provides a useful tool with which to unravel the palaeo-fluid flow history and therefore to predict fluid circulation patterns in folded siliciclastic rocks. Supplementary material: Complete isotopic data from both hand samples and thin sections, together with statistical analysis, scanning electron microscope cement images and grain size distributions with the standard operative procedure tests performed, and detailed permeability measurements are available at https://doi.org/10.6084/m9.figshare.c.4087019

Salt flow direction and velocity during subsalt normal faulting and syn-kinematic sedimentation—implications from analytical calculations

Salt flow direction and velocity during subsalt normal faulting and syn-kinematic sedimentation—implications from analytical calculations

3D seismic investigation of the structural and stratigraphic characteristics of the Pagasa Wedge, Southwest Palawan Basin, Philippines, and their tectonic implications

The Pagasa Wedge is a poorly imaged deepwater orogenic wedge that has been variously interpreted as representing an accretionary prism, a former accretionary prism modified by thrusting onto a thinned continental margin, and a gravity-driven fold-thrust belt. This study, using 2D and 3D seismic data, together with well information indicates that at least the external part of the wedge is dominantly composed of mass transport complexes, capped by syn-kinematic sediments that have thrusts and normal faults superimposed upon them. Drilling shows that despite stratigraphic repetition of Eocene Middle Miocene units, there is stratigraphic omission of Oligocene and Early Miocene units. This absence suggests that mass transport processes have introduced the Eocene section into the wedge rather than tectonic thrusting. The accretionary prism stage (Oligocene) of the Central Palawan Ophiolite history appears to be marked by predominantly north-vergent deformation. The Deep Regional Unconformity (∼17 Ma) likely indicates the approximate time when obduction ceased in Palawan. The Pagasa Wedge is a late-stage product of the convergence history that was active in its final phase sometime above the top of the Nido Limestone (∼16 Ma) and the base of the Tabon Limestone in the Aboabo-A1X well (∼9 Ma). The top of the wedge is traditionally associated with the Middle Miocene Unconformity (MMU), However the presence of multiple unconformities, diachronous formation tops, local tectonic unconformities and regional diachronous events (e.g. migrating forebulges) all suggest simply giving a single age (or assigning a single unconformity, such as the MMU as defining the top of the Pagasa Wedge is inappropriate. The overall NE-SW trend of the wedge, and the dominant NW transport of structures within the wedge diverge from the more northerly transport direction determined from outcrops in Palawan, and also from the Nido Limestone in the SW part of the Pagasa Wedge. Possibly this NW transport direction is more related to gravity-driven structures responding to uplift of NE-SW Dangerous Grounds margin during the Middle Miocene (related to slab breakoff?) than it is to thrusting rooted in a plate boundary. The final modification of the wedge occurred when the effects of compression deformation on the wedge had largely ended, but gravity processes (in particular mass transport and normal faulting) still operated.

Extensional fold-related fracturing in the Armeña rollover (Cotiella Massif, Southern Pyrenees)

The Cotiella Upper Cretaceous Basins in the central southern Pyrenees host an outstandingly exposed extensional fault system and related folds which developed by the extensional gravitational collapse of the post-rift carbonate platform above relic Upper Triassic salt at the southern margin of the Bay of Biscay-Pyrenean rift system.Among the Cotiella extensional structures, the Armena rollover involves more than 3 km of middle Coniacian to lower Santonian wedge-shaped syn-kinematic sediments which are overlying upper Albian to lower Coniacian pre-kinematic strata detached above an Upper Triassic salt layer. Although the rollover was partially inverted during the Pyrenean orogeny, its first order extensional architecture and the associated syn-extensional fracture pattern are well preserved.Both the hanging-wall and foot-wall of the NE-dipping Armena fault exposes two sets of bed-perpendicular joints which oriented about parallel (longitudinal) and perpendicular (transverse) to the fault, respectively. Spatial distribution and reactivation pattern of longitudinal joints indicate their early to syn-folding origin, where widespread longitudinal jointing occurred firstly as part of the regional extensional framework, affecting the entire rock volume with a rather constant density. Later, laterally decreasing fault-propagation rate caused the development of a hanging-wall syncline, preferentially developed at the lateral termination of the rollover.There, folding of strata above the slowly propagating fault's tip was ensured by development of further longitudinal joints that underwent shearing during the later stage of fault-propagation.