Symmetric Pattern Research Articles

Modulations of ocean-atmosphere interactions on squid abundance over Southwest Atlantic

Anthropogenic shifts in seas are reshaping fishing trends, with significant implications for aquatic food sources throughout this century. Examining a 21-year abundance dataset of Argentine shortfin squids Illex argentinus paired with a regional oceanic analysis, we noted strong correlations between squid annual abundance and sea surface temperature (SST) in January and February and eddy kinetic energy (EKE) from March to May in the Southwest Atlantic. A deeper analysis revealed combined ocean-atmosphere interactions, pinpointed as the primary mode in a rotated empirical orthogonal function analysis of SST. This pattern produced colder SST and amplified EKE in the surrounding seas, factors crucial for the unique life stages of squids. Future projections from the CMIP6 archive indicated that this ocean-atmosphere pattern, referred to as the Atlantic symmetric pattern, would persist in its cold SST phase, promoting increased squid abundance. However, rising SSTs due to global warming might counteract the abundance gains. Our findings uncover a previously unrecognized link between squids and specific environmental conditions governed by broader ocean-atmosphere interactions in the Southwest Atlantic. Integrating these insights with seasonal and decadal projections can offer invaluable information to stakeholders in squid fisheries and marine conservation under a changing climate.

Kissing Nevus of Eyelid: A Rare Case Report

Introduction : Kissing nevus, also known as kissing mole, is a rare dermatological condition in the world and characterized by the presence of congenital nevi on both the upper and lower eyelids in symmetrical fashion. Additionally, this report highlights the treatment options available for patients with kissing nevus and discusses the importance of regular monitoring.
 Case Illustration : An 11-year-old female patient came with a complaint of a mole on the upper and lower eyelids since birth. The mole was felt to be getting bigger and starting to bother her. The patient feels insecure with the presence of this mole. The patient underwent nevus excision followed by retroauricular graft placement on the superior and inferior eyelidss. Then a biopsy showed benign nevus. After follow-up, it was found that the graft had grown and there was no necrotic tissue.
 Discussion : Kissing nevus is a rare skin condition that affects babies and young children. It is characterized by two identical birthmarks that appear on either side of the body, such as on the eyelids. Surgery involves removing the birthmarks surgically. Our patient underwent wide excision and palpebral reconstruction.
 Conclusion : Kissing nevuse is a unique skin condition marked by the presence of congenital nevi on both the upper and lower eyelids in a symmetrical pattern. It is worth noting that while treatment may be effective, there is a risk of scarring, infection, and other side effects associated with these procedures.

Comparison of corneal biomechanical parameters in healthy corneas with symmetric and asymmetric bow-tie topographic pattern with inferior and superior steepening.

To compare the corneal biomechanical parameters in healthy corneas with symmetric and asymmetric bow-tie topographic patterns. In this cross-sectional study, 144 eyes were divided based on inferior-superior asymmetry value (I-S) into symmetric (zero I-S: - 0.50 to + 0.50 D) and asymmetric bow-tie topographic patterns with inferior (positive I-S: + 0.51 to + 1.4 D) or superior (negative I-S: - 2.5 to - 0.51 D) steepening. The biomechanical assessment was performed using Corvis ST and ocular response analyzer (ORA). A general linear model univariate analysis was used to compare the parameters, while the central corneal thickness, intraocular pressure, and age were considered covariates. Only the peak distance (PD) at the highest concavity phase (P = 0.007) and tomographic biomechanical index (TBI, P = 0.001) showed statistically significant differences between the three groups. For TBI, this difference was statistically significant between the positive I-S group separately with the zero I-S group (P < 0.001), and with the negative I-S group (P = 0.022). For PD, the significant difference was between the negative I-S group separately with zero I-S (P = 0.019), and positive I-S groups (P = 0.018). There was a statistically significant correlation between the I-S value with PD (r = 0.281, P = 0.001) and TBI (r = 0.170, P = 0.044). Most corneal biomechanical parameters are not statistically significant compared to the zero I-S group. However, superior steepening is associated with a stiffer response based solely on the shorter PD values seen in this group, and the group with the inferior steepening shows the highest or more suspicious values based on TBI.

New Generalized Weibull Inverse Gompertz Distribution: Properties and Applications

In parametric statistical modeling, it is essential to create generalizations of current statistical distributions that are more flexible when modeling actual data sets. Therefore, this study introduces a new generalized lifetime model named the odd Weibull Inverse Gompertz distribution (OWIG). The OWIG is derived by combining the odd Weibull family of distributions with the inverse Gompertz distribution. Essential statistical properties are discussed, including reliability functions, moments, Rényi entropy, and order statistics. The proposed OWIG is particularly significant as its hazard rate functions exhibit various monotonic and nonmonotonic shapes. This enables OWIG to model different hazard behaviors more commonly observed in natural phenomena. OWIG’s parameters are estimated and its flexibility in predicting unique symmetric and asymmetric patterns is shown by analyzing real-world applications from psychology, environmental, and medical sciences. The results demonstrate that the proposed OWIG is an excellent candidate as it provides the most accurate fits to the data compared with some competing models.

High-Power Terahertz Photonic Crystal Surface-Emitting Laser with High Beam Quality

The photonic crystal surface-emitting laser (PCSEL) has attracted much attention due to the advantages of a small far-field divergence angle and high output power. Here, we report a high-power terahertz (THz) photonic crystal laser with high beam quality through the optimization of the absorption boundary condition and the introduction of the symmetrically distributed electrodes. Single-mode surface emission at 3.4 THz with the maximum peak output power of 50 mW is demonstrated. Meanwhile, a high symmetric far-field pattern with C6 symmetry and a small divergence angle is achieved. In this device, the integration of the stable single-mode operation, high beam quality and high output power is realized, which may have great significance for practical applications.

Flow over a single dimple recessed in a flat plate

Direct numerical simulations have been conducted to investigate a zero-pressure-gradient boundary layer flow over a single shallow dimple. Here, the dimple depth to dimple diameter ratio (d/D) as well as the Reynolds number (based on D and free-stream velocity) are fixed at 0.05 and 20 000, respectively. The effect of inlet boundary layer thickness δ on a given dimple is investigated by considering δ/D∈[0.023,0.1]. The flow within the dimple exhibits either a horseshoe vortex (a continuous core line through the two spirals within the dimple) or a tornado-like vortex pair (discontinuous core line). For the given parameter range, four different flow patterns have been identified within the single dimple: (i) a steady symmetric horseshoe vortex pattern for δ/D∈[0.053,0.1], (ii) a steady asymmetric horseshoe vortex pattern for δ/D=0.04, (iii) a quasi-periodic asymmetric horseshoe vortex pattern for δ/D=0.033, and (iv) a mixed horseshoe and tornado-like vortex pattern for δ/D=0.023. The growth of the streamwise vorticity, mainly caused by the tilting of the vertical vorticity, plays a key role in the transition between the different flow patterns. Dimple-induced velocity streaks above the single dimple have been investigated in detail for the first time, showing four different streaks: (i) a high-speed streak above the dimple, (ii) two side-low-speed streaks located outside the dimple span, (iii) two side-high-speed streaks, and (iv) a mid-low-speed streak in between them. These are mainly caused by a flow acceleration effect and a flow diffuser effect over the dimple, as well as a “lift-up” mechanism within the downstream part of the dimple, tilting the boundary layer upward.

Clinical analysis of nonsyndromic oligodontia phenotypes.

To provide references, this study investigated the clinical characteristics of patients with nonsyndromic oligodontia. The information of 178 patients with oligodontia was collected, including histories, oral examinations, and panoramic radiographs. Tooth agenesis characteristics were calculated and evaluated. All the data were statistically analyzed with SPSS 24.0 software. No significant difference in the number of missing teeth was found between sexes nor between the right and left sides, and congenitally missing teeth affected the maxillary arch (P<0.05). The highest prevalence of tooth agenesis was observed in the mandibular second premolars. In the maxillary arch, the most common pattern of tooth agenesis was agenesis of the bilateral first and second premolars. The agenesis of the bilateral second premolars was observed in the mandibular arch. The prevalence of a symmetric pattern between the right and left quadrants was significantly higher than that of matched patterns between the maxillary and mandibular antagonistic quadrants. Approximately 16.85% of patients with nonsyndromic oligodontia were affected by other tooth-related anomalies. The common patterns of tooth agenesis were successfully identified in patients with nonsyndromic oligodontia. Dentists need to provide multidisciplinary treatments for patients with nonsyndromic oligodontia because of variations in occluding and full-mouth tooth agenesis patterns.

Exploring Authentication Paradigms in the Internet of Things: A Comprehensive Scoping Review

In the rapidly expanding domain of the Internet of Things (IoT), ensuring the implementation of robust security measures such as authentication has become paramount to safeguarding sensitive data and maintaining the integrity of connected devices. Symmetry in the IoT commonly denotes the uniformity or equilibrium in data distribution and processing across devices or nodes in a network. Leveraging symmetric patterns can enhance the robustness and scalability of IoT authentication. This scoping review aims to provide a comprehensive overview of recent developments in authentication techniques within the IoT paradigm. It subsequently presents recent research on various IoT authentication schemes, organized around several key research questions. The objective is to decipher the intricacies associated with authentication in the IoT by employing a multi-criteria classification approach. This involves a comprehensive analysis of existing authentication protocols, delineating their respective advantages and disadvantages, and gaining insights into the associated security concerns. The research questions highlighted in the review aim to probe the present scenario of authentication systems utilized in IoT, with a focus on identifying trends and discerning shifts. This review synthesizes insights from scholarly articles to provide a roadmap for future research in IoT authentication. It functions as a valuable resource for establishing theoretical foundations and provides practical implications applicable to practitioners, policymakers, and researchers alike. By elucidating the intricacies of IoT authentication, this review cultivates a profound understanding of the transformative potential and the multifaceted challenges. It establishes the foundation for resilient security measures essential for the sustainable growth of the Internet of Things.

Efficient Phase-Only Symmetric Pattern Synthesis for Linear and Circular Planar Arrays via Phase Perturbation in Low-Dimensional Space

Efficient Phase-Only Symmetric Pattern Synthesis for Linear and Circular Planar Arrays via Phase Perturbation in Low-Dimensional Space

Relating Tropical Cyclone Intensification Rate to Precipitation and Convective Features in the Inner Core

Abstract Using Tropical Rainfall Measuring Mission Microwave Imager observations of global tropical cyclones (TCs) from 1998 to 2013, relationships between TC intensification rate and inner-core convective and precipitation parameters are examined by decoupling the dependency of these parameters on TC intensity and that on TC intensification rate. A total of 16 TC intensity change–intensity categories are categorized based on the initial intensity and 24-h future intensity change. The results show that the TC inner-core mean rain rate, convective intensity, and stratiform rain occurrence, and axisymmetric index of convective intensity increase significantly with TC intensification rate for each TC intensity category. The symmetry of rain rate and stratiform rainfall occurrence also increase significantly with TC intensification rate for each intensity category, except from slowly intensifying (SI) to rapidly intensifying (RI) group when the initial intensity is major hurricane. The RI major hurricanes have significantly more asymmetric rainfall distribution and distribution of stratiform rainfall occurrence than those of SI major hurricanes. For TCs with initial intensity in tropical depression, tropical storm, and major hurricane categories, the RI group has a significantly more asymmetric pattern of shallow precipitation/convection occurrence in the inner core than the SI group, while it has a significantly more symmetric pattern of deep convection occurrence than the SI group. The inner-core size, as quantified by the radius of maximum azimuthal mean rainfall decreases with both TC intensification rate and TC intensity.

A Tree Attenuation Factor Model for a Low-Power Wide-Area Network in a Ruby Mango Plantation

Ruby mangoes are a cultivar with a thick skin, firm texture, red color, no splinters, and thin seeds that is grown in eastern Thailand for export. Implementing a low-power wide-area network (LPWAN) for smart agriculture applications can help increase the crop quality or yield. In this study, empirical path loss models were developed to help plan a LPWAN, operating at 433 MHz, of a Ruby mango plantation in Sakaeo, eastern Thailand. The proposed models take advantage of the symmetric pattern of Ruby mango trees cultivated in the plantation by using tree attenuation factors (TAFs) to consider the path loss at the trunk and canopy levels. A field experiment was performed to collect received signal strength indicator (RSSI) measurements and compare the performance of the proposed models with those of conventional models. The proposed models demonstrated a high prediction accuracy for both line-of-sight and non-line-of-sight routes and performed better than the other models.

The Application of Frieze Groups and Crystallographic Groups in Generating Batak Toba Ornament Motifs Using a Matlab Graphical User Interface

Gorga is a carving or sculpture typically found on the exterior of a Toba Batak traditional house. The Batak people use fractal (geometric) dimensions in Batak gorga carvings. In mathematics, repetitive and symmetrical patterns in planes that result from transformations are included in the plane symmetry groups. Ethnomathematics is a cultural approach to the concept of mathematics. A frieze group can be defined as a symmetrical group which arises from a unidirectional translation and subsequently generates a linear pattern that recurs exclusively in a single direction. There are seven different pattern types in the frieze groups. Meanwhile, crystallographic patterns are flat two-dimensional patterns that form a lattice. There are 17 crystallographic types of patterns with five different types of unit lattices. The purpose of this study is to generate motifs for Batak ornaments based on frieze groups and crystallographic groups using a Matlab Graphical User Interface (GUI). A total of 119 new motifs were generated based on seven types of patterns in the frieze groups, namely, F1,F2,F3,F4,F5,F6, and F7. Meanwhile, in the crystallographic groups, 153 new motifs were generated based on nine types of patterns, namely, p1,p2,pm,pg,cm,pmg,pmm,cmm, and pgg. To keep with trends, the new motifs generated can be used in everyday life as decorations or business symbols that are characteristic of the Toba Batak region.

Multi-directional unitarity and maximal entanglement in spatially symmetric quantum states

We consider dual unitary operators and their multi-leg generalizations that have appeared at various places in the literature. These objects can be related to multi-party quantum states with special entanglement patterns: the sites are arranged in a spatially symmetric pattern and the states have maximal entanglement for all bipartitions that follow from the reflection symmetries of the given geometry. We consider those cases where the state itself is invariant with respect to the geometrical symmetry group. The simplest examples are those dual unitary operators which are also self dual and reflection invariant, but we also consider the generalizations in the hexagonal, cubic, and octahedral geometries. We provide a number of constructions and concrete examples for these objects for various local dimensions. All of our examples can be used to build quantum cellular automata in 1+1 or 2+1 dimensions, with multiple equivalent choices for the “direction of time”.

Strengthened ENSO Amplitude Contributed to Regime Shift in the Hadley Circulation

AbstractUnderstanding the variability in the Hadley circulation (HC) changes is crucial for understanding ocean‐atmosphere interactions. In this study, the variability in the boreal winter HC in the last 4 decades is explored using multiple reanalyzes and model simulations. The results show that regime shift occurred in the leading mode of HC variability. The primary mode of the recent HC is dominated by an equatorially symmetrical pattern, which was considered the second mode in previous studies. The regime shift in HC variability is mainly due to the El Niño–Southern Oscillation (ENSO), which explains both the spatiotemporal variation and formation of HC variability. Moreover, the abilities of the models to reproduce HC variability is subject to their ability to simulate ENSO variability, suggesting that the ENSO has become a more important modulator of the HC variability in recent decades, and additional research is warranted to evaluate future climate changes and potential effects on the HC.

Mechanical manipulation for ordered topological defects.

Randomly distributed topological defects created during the spontaneous symmetry breaking are the fingerprints to trace the evolution of symmetry, range of interaction, and order parameters in condensed matter systems. However, the effective mean to manipulate topological defects into ordered form is elusive due to the topological protection. Here, we establish a strategy to effectively align the topological domain networks in hexagonal manganites through a mechanical approach. It is found that the nanoindentation strain gives rise to a threefold Magnus-type force distribution, leading to a sixfold symmetric domain pattern by driving the vortex and antivortex in opposite directions. On the basis of this rationale, sizeable mono-chirality topological stripe is readily achieved by expanding the nanoindentation to scratch, directly transferring the randomly distributed topological defects into an ordered form. This discovery provides a mechanical strategy to manipulate topological protected domains not only on ferroelectrics but also on ferromagnets/antiferromagnets and ferroelastics.

Wideband close perfect meta surface absorber for solar photovoltaic and optical spectrum applications

The leading research challenge is to develop a meta-surface absorber design for optimal performance across ultraviolet, visible, and near-infrared wavelengths. In ongoing research, a meta-surface absorber is being introduced, designed to achieve near-perfect absorption of 99% across the 250–2500 nm UV–Vis-NIR spectrum for both Transverse electric (TE) and Transverse magnetic (TM) polarized waves. The aimed design features a symmetrical resonator pattern, resulting in a polarization-insensitive absorption response. Additionally, the absorption response demonstrates robustness when altering the geometric parameters of the meta-surface unit cell. Precise simulation and modelling of the proposed meta-surface absorber are achieved by Employing a Finite Difference Frequency Domain (FDFD) solver, coupled with the Finite Integration Technique (FIT) and a tetrahedral mesh component. Verification of absorption characteristics is conducted through three frameworks: impedance matching, interference, and an equivalent circuit model. The suggested meta-structure design exhibits a uniform absorption response, as determined through considerations of impedance matching, interference theory, and the equivalent circuit theory. The PCR value is significantly lower than recent studies, reinforcing that the proposed meta-surface primarily serves as an absorber, not a polarization converter. The absorption response of the suggested meta-structure design remains consistent across the range of electromagnetic wave polarization angles from 0 to 90 for both TE and TM waves. Furthermore, the absorption response of the proposed design demonstrates stability up to an incident angle of 70 for electromagnetic waves. The distribution of electric and magnetic fields, along with surface current density on the proposed design, validates the existence of localized, propagating, and cavity surface plasmon resonance. These collectively create anti-parallel current flow, leading to the absorption of incident EM waves. Furthermore, the suggested design achieves a solar energy thermal conversion efficiency of 99% across the operational spectrum at a working temperature of 573 K, substantiating its potential for use as a solar absorber. Thus, this study presents a meta-structure unit cell that addresses the challenge with near-perfect absorption, polarization independence, and angle robustness. Applications include photodetection, thermal mapping, solar harvesting, and photo-trapping.

A neutron fluence map of the Los Alamos National Laboratory Godiva IV critical assembly

A neutron fluence map and a total ionizing dose map of the Los Alamos National Laboratory Godiva IV fast burst critical assembly was generated using passive reactor dosimetry, comprised of sulfur pellets and thermoluminescent dosimeters. Godiva IV is an unmoderated, fast burst, critical assembly constructed of approximately 65 kg of highly enriched uranium fuel alloyed with 1.5 % molybdenum for strength. [1] The mapping was performed during a single 75.6 ºC temperature rise burst operation, with the top and sides of the cylindrical Godiva-IV Top Hat covered in passive dosimetry. Dosimetry was placed in a symmetric pattern around the Top Hat, with higher concentrations near the control rods and burst rod. A specific portion of the lower quadrant of the burst rod was mapped to confirm a testing region where the neutron fluence varied by no more than ± 5%. The results will be used to assess the neutron, gamma, and total ionizing dose environment in three-dimensional space around the assembly for higher fidelity experiment placement, active dosimetry positioning, and radiation field characterization.

Control of Low-Level Wind on the Diurnal Cycle of Tropical Coastal Precipitation

Abstract To understand how coastal precipitation is controlled by the low-level background wind, we performed comprehensive analysis using the 17-yr observations of the TRMM PR over the entire region of the tropics. We classified the data according to the direction (onshore or offshore) and strength of the cross-shore wind. Under weak winds, the contribution of the diurnal cycle to total precipitation is large, indicating that thermally forced precipitation with a symmetrical propagation pattern with opposite sign across the coastline is dominant. As the background wind strengthens, the contribution of the diurnal cycle reduces owing to the predominance of mechanical forcing; however, the effect of the diurnal cycle remains nonnegligible with an asymmetrical propagation pattern across the coastline. Using the linear theory of the sea–land-breeze circulation, we demonstrated that the difference in propagation is attributable to gravity waves excited by the land–ocean surface heating difference. Under weak winds, symmetrical diurnal phase propagation is caused by the two symmetrical modes of landward and seaward gravity waves. Under stronger background winds, in addition to the Doppler-shifted landward and seaward modes, waves propagating toward the upwind side in the flow-relative frame but with slow group velocity are advected to the downwind near the coastline, forming another mode that moves slowly in the downwind direction. The superposition of the three modes leads to asymmetrical propagation of precipitation with varying phase speed depending on the distance from the coastline.

A COMPACT HONEYCOMB-STRUCTURED RECONFIGURABLE ANTENNA WITH COPLANAR WAVEGUIDE FEED FOR MULTIBAND WIRELESS APPLICATIONS

The design and implementation of reconfigurable antennas in wireless applications play a tremendous role in minimizing the hardware size of wireless devices. An antenna with the potential to vary its frequency of operation, radiation pattern, and polarization according to the requirement is known as a reconfigurable antenna. Here a novel honeycomb-structured frequency and pattern-reconfigurable monopole antenna has been designed. A honeycomb structure provides better bandwidth as it has multiple edges; angles of the hexagon allow for more efficient radiation and reception of electromagnetic waves and it offers a symmetric radiation pattern. It is compact, with higher packing density. A lowcost FR-4 substrate with a thickness of 1.5 mm and a compact size of 25 mm &amp;times; 42 mm is used in the design. The antenna can be operated in four modes using two PIN diodes. In mode 0 it can resonate at 2.4 GHz, which is commonly used for Wi-Fi and Bluetooth communication, while in mode 1 it operates at 2.8 GHz and 1.8 GHz for mobile communication. In mode 2 it operates at 2.7 GHz as well as 1.8 GHz, and in mode 3, it works at 1.8 GHz and 3.6 GHz for WiMAX communication. This antenna has a peak gain value of 3.99 dBi. Thus, by changing the geometry/structure, antenna performance can be improved. The proposed design is fabricated on FR-4 substrate material, and the parameters such as return loss (S&lt;sub&gt;11&lt;/sub&gt;) and bandwidth are validated. The simulated results and the measured results match well.

3D-printed High-gain Multisection DRA with Symmetric Radiation Pattern

3D-printed High-gain Multisection DRA with Symmetric Radiation Pattern