Switched-capacitor Research Articles

Novel Topology for Modified Boost Series and Parallel Switching Capacitor DC-DC Converter

Theoretical and experimental work for a novel topology of DC-DC boost switching capacitor converter is introduced in this paper. This new design is an adjustment for boost series and parallel topology developed by Makowski. Thus, a comparison between the two designs presented in this paper aims to highlight the improvement in the conversion rate of the boost converter’s output voltage while using the same number and size of capacitors. Converter analyses for both with and without load are presented. Also, a boost converter with a nonlinear ferroelectric capacitor is presented to further increase the boost converter conversion rate using advantages of the ferroelectric capacitors, such as their big dielectric constant and polarization reversal.

Research and optimization of the gain characteristics of cascode amplifiers

Abstract. With the continuous development of IC technology, high-performance operational amplifiers are widely used in various circuit systems such as high-speed Analog-to-Digital Converters (ADCs), Digital-to-Analog Converters (DACs), switched capacitor filters, bandgap voltage reference sources, precision comparators. The amplifier has become the core unit circuit of analog IC and mixed-signal IC design, and its performance directly affects the overall performance of the circuit and system. The design of high-performance operational amplifiers has always been one of the hotspots in the research of analog IC design in order to meet the needs of various application fields. Cascode Amplifier is a classic structure widely used in high-frequency and high-gain electronic circuits. This project aims to study the gain characteristics of cascode amplifiers, explore the main factors affecting their gain, and propose methods to optimize the gain. Through theoretical analysis and simulation, the influence of different parameters on gain is verified. Then the optimization strategy is summarized to provide a reference for actual circuit design.

Enhanced High‐Gain Switched Capacitor DC–DC Converter Optimizing Renewable Energy Integration

ABSTRACTA novel high‐gain switched capacitor (HGSC) DC–DC converter for carbon neutral energy applications is presented in the scientific paper. It consists of two MOSFET switches, and utilization of a simultaneous switching approach for the switches enables simplified control. The switched capacitor (SC) technique is utilized to extract high gain from the proposed HGSC topology; the basic idea is periodic charging and discharging of the capacitor. The proposed HGSC topology operational mode is carried out in Continuous Conduction Mode (CCM) along with the steady‐state analysis, and different switching stages are discussed in detail. Then, an analysis is carried out to demonstrate the proposed HGSC converter's special feature with other high‐gain converters. An averaging state‐space technique is used to determine the suggested converter's dynamics performance, and a small signal analysis is used to verify its stability. Furthermore, the HGSC topology is thoroughly analyzed in terms of power losses. For comparing the practical efficiency of the designed converter, nonidealities voltage gain is derived. The maximum efficiency of 96.7% is obtained at 150 W output power with the help of the dSPACE 1104 controller. Whenever the HGSC converter is fed with an input voltage supply of 20 V. It generates output voltages between 140 and 240 V. Extensive experimental investigation is carried out on a 200 W laboratory prototype model to verify the practicability and feasibility of HGSC DC–DC converter topology.

A Novel High-Gain Multi-Stage Switched-Capacitor-Based DC-DC Boost Converter with Closed-Loop Control

In this manuscript, a direct current (DC) boost converter based on a switched-capacitor circuit with closed-loop control, tailored for applications with high-voltage gain, is introduced. The converter utilizes a network with switching capacitors to enhance voltage gain without relying on inductors, making it ideal for high-voltage scenarios. An active disturbance rejection control (ADRC)-based control scheme is used to maintain output voltage stability in the presence of disturbances. The proposed converter’s functionality and performance are assessed through simulations and experimental tests under various load conditions. A loss analysis, considering the losses from switches and diodes, is provided to determine the net efficiency. The results from both simulations and experiments show that the proposed converter achieves a high-voltage gain, excellent load regulation, and rapid transient response, highlighting its potential for applications that require a high-voltage boosting operation.

An extendable switched‐capacitor based three‐phase multilevel inverter with boosting capability

AbstractThe increasing demand for integrating renewable energy sources necessitates inverter topologies with boosting capabilities. Using inverters with boosting capability and a low number of components to integrate renewable energy sources can reduce costs. This study describes a three‐phase multilevel inverter based on extendable switching capacitors. The use of voltage‐doubling modules permits the development of the inverter's capability. By increasing the number of doubling modules, the number of output voltage levels and boost factor are increased. Furthermore, the study introduces and implements a line voltage‐based pulse width modulation approach developed for the proposed inverter. The operation of the proposed multilevel inverter, along with the pulse width modulation scheme, common mode voltage, and power loss analysis are thoroughly discussed. Additionally, a comparative analysis is provided; highlighting the advantage of reducing the number of power switches in the proposed three‐phase inverter compared to other existing topologies. Finally, a laboratory prototype is developed, operating at a 4 kHz switching frequency and with a 120 V DC‐link voltage. The experimental results corroborate the efficiency and performance of the proposed multilevel inverter, thereby validating its practical applicability.

Addressing output ripples in low-power CMOS-based multistage DC-DC boost converters for self-powered electrochemical sensors applications

In modern electronic systems, the DC-DC converter plays a pivotal role by facilitating the conversion of direct current (DC) from one voltage level to another. Given the diverse voltage requirements of contemporary chips, a single chip may encompass multiple circuitry groupings, each necessitating specific voltage levels for optimal functionality. To address this need, voltage converters are essential, whether it involves increasing the voltage (Boost converter), decreasing the voltage level (Buck converter), or performing both functions (Buck-boost converter). This paper presents a novel multistage DC-DC converter designed to minimize voltage ripples. The proposed three-stage DC-DC converter is supplied with a 1.5-V input and achieves a four-boost ratio. The cascaded architecture integrates switching capacitors and a gyrator, complemented by a terminating low-pass filter, resulting in a minimal voltage ripple of 0.0003 % relative to the maximum output voltage. Notably, integrating the gyrator enables an inductorless CMOS-based architecture, significantly reducing layout area to 30 × 140 μm2. Furthermore, the converter's transient response was simulated, yielding a response time of 90 ms.

Design Considerations for Power-Efficient Fully Integrated 3:1 Switched Capacitor DC-DC Converter for PV Modules

This article presents a power-efficient DC-DC converter based on a switched-capacitor (SC) cell in power management systems supplied for fully integrated photovoltaic (PV) modules. These modules shall provide high-performance point-of-load voltage regulation. The primary objective of this study is to better utilize capacitance and switches by selecting a proper SC topology in order to improve the power efficiency of SC converters. A general steady-state performance model is investigated to optimize and compare a variety of SC DC-DC topologies. The investigation method relies on a charge-multiplier approach and considers the impact of area constraint on capacitors. To identify the most suitable topology for a given conversion ratio, the performance-limit metrics of SC converters are calculated. The analysis provides framework to determine optimum switch size and switching frequency for a two-phase 3:1 series–parallel converter for a target load current of 10 mA implemented on a 22 nm process technology. The results shows that a minimum of 250 MHz switching frequency is desirable for achieving a target efficiency greater than 85% while maintaining the minimum output voltage of 0.34 V. The analysis results are verified through MATLAB and PSpice-based simulations.

Constructing High-Performance and Versatile Liquid-Solid Triboelectric Nanogenerator with Inflatable Columnar Units

Abstract The use of water resources for energy generation has become increasingly prevalent, encompassing the conversion of kinetic energy from streams, tides, and waves into renewable electrical power. Water energy sources offer numerous benefits, including widespread availability, stability, and the absence of carbon dioxide and other greenhouse gas emissions, making them a clean and environmentally friendly form of energy. In this work, we develop a droplet-based liquid-solid triboelectric nanogenerator (LS-TENG) using sophisticatedly designed inflatable columnar structures with inner and outer dual-electrode. This device can be utilized to harvest both the internal droplet-rolling mechanical energy and the external droplet-falling mechanical energy, capable of assembling into various structures for versatile applications. The design incorporates a combined structure of both internal and external TENG to optimize output performance via multiple energy harvesting strategies. The internal structure features a dual-electrode columnar-shaped LS-TENG, designed to harvest fluid kinetic energy from water droplet flowing. By leveraging the back-and-forth motion of a small amount of water within the air column, mechanical energy can be collected, achieving a maximum mass power density of 9.02 W/Kg and an energy conversion efficiency of 10.358%. The external component is a droplet-based LS-TENG, which utilizes a double-layer capacitor switch effect elucidated with an equivalent circuit model. Remarkably, without the need for pre-charging, a single droplet can generate over 140 V of high voltage, achieving a maximum power density of 7.35 W·m² and an energy conversion efficiency of 22.058%. The combined LS-TENG with sophisticated inflatable columnar structure can simultaneously collect multiple types of energy in high efficacy, exhibiting great significance in potential applications such as TENG aeration rings, inflatable lifejacket, wind energy harvesting, gas-column TENG tents, and green houses.

Adaptive Reactive Power Management with Thyristor-Controlled Transformer and Fixed Capacitor

The objective of this article is to develop and analyse a thyristor-controlled transformer with a fixed capacitor for reactive power compensation in power systems. Reactive power compensation is crucial for enhancing the efficiency and stability of power systems by reducing power losses, improving voltage profiles, and minimizing equipment stress. Traditional compensation methods often rely on fixed capacitors, reactors, or static VAR compensators, but these systems lack the flexibility required for dynamic control of reactive power under varying load conditions. The proposed approach integrates a thyristor-controlled transformer with fixed capacitors, allowing for precise, real-time adjustment of reactive power flow. The novelty of this article lies in the hybrid configuration of the thyristor-controlled transformer and fixed capacitor, which provides a cost-effective and robust solution compared to conventional systems. Unlike traditional methods that depend solely on switching capacitors or reactors, the use of thyristors allows for fine-tuning of reactive power, offering improved performance under variable loading conditions without the need for complex control algorithms. This setup enhances the adaptability of reactive power management, thus maintaining optimal power factor and voltage regulation. The findings from the simulation and experimental results demonstrate significant improvements in power factor correction, voltage stabilization, and reduction in harmonic distortion. The proposed system exhibits a faster response time and greater control accuracy compared to existing compensation techniques. These advantages make the thyristor-controlled transformer with a fixed capacitor a promising alternative for power utilities seeking to enhance the operational efficiency and reliability of their networks. This article contributes to the advancement of reactive power compensation technologies, providing a scalable solution suitable for modern power system.

Research on a Thirteen-Level Switched Capacitor Inverter with Low Switching Loss

This paper presents a 13-level switched capacitor inverter with a novel modulation method designed to minimize the number of switches and significantly reduce switching losses. The inverter stands out for its simplicity, requiring only ten semiconductor switches to generate 13 levels. A key feature is the inherent self-voltage balancing of the capacitors, which eliminates the need for additional control mechanisms. The inverter’s unique architecture, comprising high-voltage and low-voltage modules, enables modulation using a hybrid PWM approach that combines step waveform modulation with level-shifted PWM (LS-PWM). This innovative technique dramatically lowers the switching frequency of the high-voltage module’s switches, independent of the carrier frequency, thereby limiting the number of switches in high-frequency operation and achieving substantial reductions in switching losses. This paper provides a detailed analysis of the inverter’s operating modes, voltage-balancing mechanisms, and parameter calculations. The advantages of the topology presented in this paper are demonstrated by comparison. Finally, the simulation and experimental results confirm the practicality and effectiveness of the proposed inverter and its modulation strategy.

RF NEMS switches based on graphene for low pull-in voltage and excellent RF performance

This study introduces a novel graphene RF NEMS capacitive switch and conducts an extensive analysis of its RF performance using CST and COMSOL Multiphysics software. The switch’s characteristic impedance matching is accomplished through a coplanar waveguide (CPW) structure, incorporating a dielectric layer topped with conductive graphene beam electrodes. Simulation results reveal that the monolayer graphene RF NEMS switch maintains an insertion loss of 0.003 ~ 0.015 dB and an isolation greater than 40 dB across an ultra-wideband (UWB) frequency range of DC ~ 140 GHz. Moreover, the switch demonstrates a switching time of 4.03 ps at a pull-in voltage of 1 V. The performance of multilayer graphene RF NEMS switches was also evaluated. The study further investigates the operational mechanism of the graphene RF NEMS switch and performs finite element analysis on the proposed design. The graphene RF NEMS switch discussed herein offers significant advantages, including minimal size, lightweight, cost-effectiveness, low pull-in voltage, rapid response time, excellent RF performance, and reduced space consumption in circuitry. Its potential applications span a range from L to F bands, encompassing data storage, communication systems, sensors, remote sensing and military uses.

Hybrid switched‐capacitor‐based boost DC–DC converter with reduced voltage stress

AbstractThis article presents the new hybrid switched‐capacitor (SC)‐based transformerless DC–DC converter with a high step‐up capability and common ground features. The proposed hybrid SC‐based converter provides low voltage stress across semiconductor devices to utilize MOSFETs with lower Rdson and low voltage ratings. In addition, the diodes in SC cells with low voltage stress can reduce the reverse recovery power loss of the converter. Thus, the overall efficiency of the proposed hybrid SC‐based converter can be increased. The converter circuit, operating principle, and design guidelines of the proposed hybrid SC‐based converter are discussed. To confirm the performance of the proposed hybrid SC‐based converter, a detailed comparison study with the conventional hybrid SC converter is also presented. Finally, a laboratory prototype with 200 W and 25 to 200 V is set up to verify the effectiveness of the proposed hybrid SC‐based converter.

Collaborative deployment of multiple reinforcement methods for network‐loss reduction in distribution system with seasonal loads

AbstractThe integration of seasonal loads, such as cereal baking and aquatic‐product processing loads, often leads to significant voltage deviations and severe peak loads of the distribution system during specific periods, resulting in increased network losses. Traditional approaches for reducing network losses are becoming less effective and cost‐efficient due to the spatiotemporally uneven distribution characteristics of seasonal loads. To address this issue, this study proposes an optimisation model that collaboratively integrates mobile energy storage, switching capacitors, and tie lines to minimise annual network losses in special planning scenarios affected by seasonal loads. The deployment strategies of multiple reinforcement methods are thoroughly analysed, greatly enhancing the explainability and feasibility of the collaborative deployment model. Then, the proposed model is reformulated to a mixed‐integer linear programming model using the inscribed regular dodecagon approximation approach, thereby making it trackable for state‐of‐the‐art solvers. To illustrate the effectiveness of the model, case studies are conducted on a unique 55‐bus distribution system located in East China, which contains feeders with substantial seasonal variation aquaculture loads and with general loads. The effectiveness of multiple reinforcement methods is thoroughly analysed through detailed numerical results. Furthermore, a sensitivity analysis of the investment budget is conducted.

A 0.075 mm2 BJT-based temperature sensor with a one-point trimmed 3[formula omitted] inaccuracy of ±0.97 °C from −40 °C to 120 °C

This paper presents a bipolar junction transistor (BJT)-based CMOS temperature sensor for high accuracy, small-scale area, and low power consumption. A structure with a feedback amplifier biasing NPN transistors, combined with dynamic element matching (DEM), is proposed to avoid the effects of errors arising from the limited current gain of substrate PNP transistors in deep-submicron processes. Moreover, the switched capacitor (SC) integrators employ two single-stage cascode amplifiers for alternating cyclic sampling and integration, effectively simplifying the circuit design and reducing the operating voltage. The proposed sensor is fabricated with a standard 180 nm CMOS process, occupying an active chip area of 0.075 mm2. It consumes 39.1 μW of power at room temperature, operating with a supply voltage of 1.8 V. The measurements indicate that the sensor exhibits an inaccuracy of ±0.97 °C (3σ) across the temperature range from −40 °C to 120 °C following a single-point temperature calibration.

Switch Capacitor–Based High Step‐Up Three‐Port DC–DC Converter for Fuel Cell/Battery Integration

ABSTRACTAddressing issues of low input voltage in new energy generation systems such as fuel cells, a high step‐up three‐port DC–DC converter for fuel cell/battery hybrid power supply system is proposed. The proposed converter is evolved from Boost three‐port converter, and switch capacitor structure and diode capacitor voltage doubling unit are employed to achieve high voltage gain and low voltage stress. The three ports are connected to fuel cell, battery and load respectively, among which the flow of energy is realized. The steady state performance of this converter in various operating states and design of parameter are presented. Primary competitive advantages compared to similar converters include high voltage gain, continuous input current and its feature of common ground. Moreover, control strategy and compensators under three operating modes are designed to achieve stable output voltage and battery protection. Finally, a 100 W experimental prototype with 15 V input voltage and 24 V battery voltage is established to verify the stable and dynamic performance of the proposed converter.

A new fault-tolerant converter for renewable energy applications with improved reliability

With power converters consisting of several components, the reliability of a power converter becomes a major concern. With a switched-capacitor (SC) integrated into multilevel inverter (MLI) topologies, the chances of faults is more due to a much larger number of components than the MLI topologies with multiple isolated dc voltage sources. In this article, several SC-based 5L-MLI topologies have been analyzed for their performance with open-circuit fault (OCF), and based on the analysis, three 5L fault-tolerant MLI topologies have been proposed. The analysis for the proposed topologies have been carried out in terms of power loss analysis using PLECS software and power quality analysis using MATLAB software for different fault case scenarios. Further, the proposed 5L topologies have been compared with a similar state-of-the-art. A hardware prototype has been developed, and results have been discussed for various operating conditions.

Operator-Based Triboelectric Nanogenerator Power Management and Output Voltage Control.

In this paper, an operator-based voltage control method for TENGs is investigated, achieving output voltage tracking without compensators and uncertainty suppression using robust right coprime factorization. Initially, a comprehensive simulation-capable circuit model for TENGs is developed, integrating their open-circuit voltage and variable capacitance characteristics. This model is implemented to simulate the behavior of TENGs with a rectifier bridge and capacitive load. To address the high-voltage, low-current pulsating nature of TENG outputs, a storage capacitor switching model is designed to effectively transfer the pulsating energy. This switching model is directly connected to a buck converter and operates under a unified control strategy. A complete TENG power management system was established based on this model, incorporating an operator theory-based control strategy. This strategy ensures steady output voltage under varying load conditions without using compensators, thereby reducing disturbances. Simulation results validate the feasibility of the proposed TENG system and the efficacy of the control strategy, providing a robust framework for optimizing TENG energy harvesting and management systems with significant potential for practical applications.

An Enhanced Voltage Gain Techniques in Quadratic Boost Converters - A Systematic Review

High voltage gain non-isolated boost DC-DC converters are widely employed in applications such as hybrid electric vehicles, aircraft power supplies, photovoltaic (PV) systems and fuel cells (FC) applications. The use of conventional boost converters in high-gain applications is affected by their practical limitation on their voltage gain. Several boost converter topologies based on different voltage lift techniques have been studied and reported; them is quadratic boost converter (QBC). These converters have recently emerged as an interesting topology because of the quadratic nature of their voltage gain, simple among structure and simple control scheme. Recently modified topologies of QBC employing different voltage lift techniques aimed at further enhancing their performance are reported. This paper is aimed at presenting a review on the advances in quadratic boost converters topologies. In this article, QBC are categorized into five groups: magnetically coupled based on coupled-inductor (CI), switch-inductor (SI), switch-inductor switch-capacitor (SC-SI), switch-capacitor (SC), and soft-switching QBC. Furthermore, the paper makes a comprehensive comparison of various QBC in terms of voltage conversion ratio, total component count, input current ripples and voltage stress across switching devices.

A novel high step‐up, low switching voltage stress DC‐DC converter using leakage inductance for resonant boosting

AbstractA DC‐DC converter with high boost and low switching voltage stress is proposed by combining switched capacitor (SC) and coupled inductor (CL) techniques based on a conventional boost circuit. The design methodology of this converter includes substituting SC for a single switch in the boost converter, combining CL, and integrating a resonant boost circuit for absorbing leakage inductance. The improved power switch topology in this design has lower voltage stress, lower diode current stress, fewer total components, and common ground than other conventional DC‐DC converters. The operating modes and steady state analysis of the converter are provided in terms of leakage inductance utilization, with component stress derivation and theoretical efficiency analysis. In addition, comparisons with other dc‐dc converters are made. Subsequently, experiments were conducted on a 200 W DC‐DC converter prototype to verify the reliability of the converter.

Multi-Timescale Voltage Regulation for Distribution Network with High Photovoltaic Penetration via Coordinated Control of Multiple Devices

The high penetration of distributed photovoltaics (PV) in distribution networks (DNs) results in voltage violations, imbalances, and flickers, leading to significant disruptions in DN stability. To address this issue, this paper proposes a multi-timescale voltage regulation approach that involves the coordinated control of a step voltage regulator (SVR), switched capacitor (SC), battery energy storage system (BESS), and electric vehicle (EV) across different timescales. During the day-ahead stage, the proposed method utilizes artificial hummingbird algorithm optimization-based least squares support vector machine (AHA-LSSVM) forecasting to predict the PV output, enabling the formulation of a day-ahead schedule for SVR and SC adjustments to maintain the voltage and voltage unbalance factor (VUF) within the limits. In the intra-day stage, a novel floating voltage threshold band (FVTB) control strategy is introduced to refine the day-ahead schedule, enhancing the voltage quality while reducing the erratic operation of SVR and SC under dead band control. For real-time operation, the African vulture optimization algorithm (AVOA) is employed to optimize the BESS output for precise voltage regulation. Additionally, a novel smoothing fluctuation threshold band (SFTB) control strategy and an initiate charging and discharging strategy (ICD) for the BESS are proposed to effectively smooth voltage fluctuations and expand the BESS capacity. To enhance user-side participation and optimize the BESS capacity curtailment, some BESSs are replaced by EVs for voltage regulation. Finally, a simulation conducted on a modified IEEE 33 system validates the efficacy of the proposed voltage regulation strategy.