Swelling Test Research Articles

Evaluation of Bioplastic Developed from Corn Starch and Euphorbia antiquorum Latex

Traditional plastic materials have a negative environmental impact and one potential strategy to reduce this rising plastic pollution is to use compostable materials like bioplastic. An experiment was conducted at RVS School of Engineering and Technology, Dindigul to synthesize bioplastic from agricultural products like corn starch, latex of Euphorbia antiquorum and polyvinyl alcohol (PVA). Two sets of blend bioplastic film samples were prepared using solution casting method; Sample A (corn starch + latex of Euphorbia antiquorum) and Sample B (corn starch + latex of Euphorbia antiquorum + PVA). Studies on the degradation properties were carried out by solubility, swelling and soil burial test. The biodegradability of the samples was investigated by soil burial test. Based on this study, the Sample A film without PVA was found to be highly biodegradable as compared to Sample B. The solubility and swelling tests were performed using organic solvents; ammonia, acetic acid, methanol and water. The swelling property of Sample B film showed less percentage of swelling. The solubility test showed that none of the bioplastic samples were completely soluble in any of the organic solvents. Result of this research work indicated that the bioplastic with incorporation of PVA is a better alternative to conventional plastic films.

Preparation and characterization of lysozyme loaded cryogel for heavy metal removal

In the present study, monolithic poly(N-isopropylacrylamide-acrylamide)-acrilic acid (poly(npam-aam)-aac) cryogels were made. Swelling tests, SEM, XRD, and ATR-FTIR analyses revealed distinct cryogel and lysozyme-loaded cryogel properties. The equilibrium swelling degree was 6.2 g H2O/g cryogel. The created poly(npam-aam)-aac with pores of 10–100 μm was obviously seen in SEM images. Lysozyme adsorption capacity on poly(npam-aam)-aac was found to be 260 mg/g at pH 7.4 and 40 °C. After that, we used lysozyme adsorbed cryogel for the removal of the model heavy metal ion (cadmium). A series of pH, duration, and ionic strengths were used to conduct Cd2+ adsorption experiments. The results showed that the new adsorbent had a considerable chemical affinity for Cd2+ ions in its ability to bind them under eye ocular conditions (pH 7.4, 32–36 °C, 0,15 M NaCl). The traditional Langmuir adsorption model was the most suitable, achieving maximum uptake of ∼185 mg/g. Chemical adsorption was found to be the rate-controlling step, and the process was also compatible with the pseudo-second-order model. For the treatment of ocular pathologies, the most effective enzyme, lysozyme, must show its function. That is why there is a need for using lysozyme, and lysozyme is selected as a lignad to adsorb heavy metal ions because of its high heavy metal binding affinity. This material could be used for the treatment of ocular pathologies in the future.

Sodium alginate/Hydroxyapatite/nanocellulose composites: Synthesis and Potentials for bone tissue engineering

Sodium alginate/hydroxyapatite/Nano cellulose (SA/HA/NC) nanocomposite films that possess good biocompatibility for bone tissue engineering are prepared by a simple solution casting. HA is one of the most frequently used bioceramic materials to achieve a high biocompatibility. The bionanocomposite films are analysed by XRD, SEM, EDAX and FTIR studies. XRD confirms the existence of fillers in the polymer. FTIR spectrum shows the different functional modes in the bionanocomposite films. The morphology of fillers and bionanocomposite films are obtained through SEM. The inclusion of NC with different concentrations into the biopolymer film improves the tensile strength. As a result, the loading of 5 wt % of NC and 10 wt% of HA in the SA polymer shows high tensile strength when compared to the pure SA, SA filled with 10 wt% of HA and SA loaded with 10 wt% of HA and inclusion of NC (0.5 and 2.5 wt%). The tensile strength (TS) of bionanocomposite film with 10 wt % of HA is increased by 17%. TS of bionanocomposite film with 0.5 and 2.5 wt% of NC is increased by 177 and 277%, whereas TS of bionanocomposite film loaded 5 wt% of NC is increased by 331%. The swelling, biodegradation and biomineralization tests suggest that this bionanocomposite films are hopeful biomaterials for bone tissue engineering.

Green nanocomposite synthesis and application: Electrochemically exfoliated graphene-modified biopolymer as an effective clay swelling inhibitor for water-based drilling muds

The expansion of shale formations causing wellbore instability is a costly challenge in drilling operations. To address this issue, researchers have explored the potential of graphene as a shale swelling inhibitor and fluid loss controller. However, the practical application of graphene has been hindered by settling and limited dispersion in drilling muds. In this study, we present a promising solution using low-cost graphene prepared through simple electrochemical exfoliation of graphite. The resulting graphene was further combined with a natural biopolymer to create a nanocomposite. The nanocomposite, known as electrochemically exfoliated graphene-modified Gum Arabic (GrO-ArG), was evaluated as a fluid loss controller and shale swelling inhibitor in water-based drilling muds. To assess its inhibition potential, linear swelling and capillary suction timer tests were employed using different concentrations of the nanocomposite. Additionally, the performance of the drilling mud was examined through rheology and fluid loss tests. The experimental outcomes revealed that modified graphene showed strong dispersion in the water compared to graphene with minimum settling with time. The modified graphene showed stable dispersion in different pH and salinity solutions. GrO-ArG prominently reduced the linear swelling of bentonite clay (Na-Ben). It was observed that the decline in linear swelling was the function of the concentration of GrO-ArG, such as 1 wt% of ArG-GrO-A and ArG-GrO-B reduced the linear swelling by 37.8% and 43.9% correspondingly as compared to deionized water. The zeta potential measurement confirms the adsorption of GrO-ArG with the Na-Ben. The addition of GrO-ArG also revealed a prominent decrease in fluid loss. After the addition of ArG-GrO-A and ArG-GrO-B, the fluid loss declined from 11.3 mL to 8.2 mL and 7.1 mL respectively. A decrease in shear stress was also observed due to the addition of GrO-ArG in the drilling mud. From the experimental findings, it can be inferred that GrO-ArG is a strong candidate that might serve as an alternate green clay swelling inhibitor and fluid loss controller for water-based drilling muds.

Discriminant Analysis and Data Mining CHAID Decision Tree as Tools to Evaluate the Buffering Effect of Hydroxytyrosol on Reactive Oxygen Species in Rooster Sperm Cryopreservation.

Sperm cryopreservation is effective in safeguarding genetic biodiversity in avian species. However, during this process, spermatozoa are very susceptible to plasma membrane peroxidation in the presence of high concentrations of reactive oxygen species (ROS). To mitigate this effect, the addition of exogenous antioxidants, such as hydroxytyrosol (3,4-dihydroxyphenylethanol; HT), an antioxidant derived from olive oil, to the cryopreservation sperm diluent, could be useful. To verify this, a cryopreservation diluent was supplemented with different concentrations (0 μg/mL, 50 μg/mL, 100 μg/mL, and 150 μg/mL) of HT. For this, semen was collected in 10 replicates from 16 roosters of the Utrerana avian breed, and a pool was prepared with the optimum quality ejaculates in each replicate. After cryopreservation, spermatozoa were thawed and different in vitro semen quality parameters were evaluated. A discriminant canonical analysis (DCA) was carried out and revealed that total motility (TM; Lambda = 0.301, F = 26,173), hypo-osmotic swelling test (HOST; Lambda = 0.338, F = 22,065), and amplitude of lateral head displacement (ALH, Lambda = 0.442; F = 14,180) were the variables with the highest discriminant power. Finally, a chi-squared automatic interaction detection (CHAID) decision tree (DT) was performed excluding fresh semen samples and ROS was found to be the most valuable variable to discriminate between the different established freezing groups. Samples in the absence of HT or with low concentrations of this antioxidant showed less desirable ROS values in cryopreserved rooster semen. The present study could lead to the improvement of cryopreservation techniques for the genetic material of local poultry breeds and optimize the conservation programs of endangered native avian breeds.

Whey Protein Isolate/Calcium Silicate Hydrogels for Bone Tissue Engineering Applications-Preliminary In Vitro Evaluation.

Whey protein isolate (WPI) hydrogels are attractive biomaterials for application in bone repair and regeneration. However, their main limitation is low mechanical strength. Therefore, to improve these properties, the incorporation of ceramic phases into hydrogel matrices is currently being performed. In this study, novel whey protein isolate/calcium silicate (WPI/CaSiO3) hydrogel biomaterials were prepared with varying concentrations of a ceramic phase (CaSiO3). The aim of this study was to investigate the effect of the introduction of CaSiO3 to a WPI hydrogel matrix on its physicochemical, mechanical, and biological properties. Our Fourier Transform Infrared Spectroscopy results showed that CaSiO3 was successfully incorporated into the WPI hydrogel matrix to create composite biomaterials. Swelling tests indicated that the addition of 5% (w/v) CaSiO3 caused greater swelling compared to biomaterials without CaSiO3 and ultimate compressive strength and strain at break. Cell culture experiments demonstrated that WPI hydrogel biomaterials enriched with CaSiO3 demonstrated superior cytocompatibility in vitro compared to the control hydrogel biomaterials without CaSiO3. Thus, this study revealed that the addition of CaSiO3 to WPI-based hydrogel biomaterials renders them more promising for bone tissue engineering applications.

Zinc ions and ciprofloxacin-encapsulated chitosan/poly(ɛ-caprolactone) composite nanofibers promote wound healing via enhanced antibacterial and immunomodulatory

Antibacterial and anti-inflammatory nanofibrous membranes have attracted extensive attention, especially for the cutaneous wound treatment. In this study, zinc ions and ciprofloxacin-encapsulated chitosan/poly(ɛ-caprolactone) (CS/PCL) electrospun core-shell nanofibers were prepared by employing zinc ions-coordinated chitosan as the shell, and ciprofloxacin-functionalized PCL as the core. The morphology and core-shell structure of the as-prepared composite nanofibers were examined by SEM and TEM, respectively. The physical structure and mechanical property of the electrospun membrane were explored by FTIR, swelling, porosity and tensile test. Tensile strength of the zinc ions-coordinated CS/PCL composite nanofibers was enhanced to ca. 16 MPa. Meanwhile, the composite nanofibers can rapidly release of ciprofloxacin during 11 days and effectively suppress above 98 % of S. aureus proliferation. Moreover, the composite nanofibers exhibited excellent guide cell alignment and cyto-activity, as well as significantly down-regulated the inflammation factors, IL-6 and TNF-α in vitro. Animal experiments in vivo showed that the zinc ions-coordinated CS/PCL membrane by means of the synergistic effect of ciprofloxacin and active zinc ions, could significantly alleviate macrophage infiltration, promote collagen deposition and accelerate the healing process of wounds.

Antioxidant Activity of Fermented Red Bean Extract on Sperm Quality of Mice Exposed to Cigarette Smoke

Smoking has a negative effect on fertilization as it decreases sperm quality. The current research aimed to investigate the effect of fermented red bean (Phaseolus vulgaris L.) extract on sperm motility, viability, and plasma membrane integrity of white mice (Mus musculus) exposed to cigarette smoke. The red beans were subjected to a 36-hour fermentation process using Rhizopus spp. Then, methanol was extracted by maceration method for 24 hours until maceration was obtained. In this study, 25 male white mice aged 3 months were randomly divided into 5 groups of 5 mice. Group C (negative control) was given 0.5 mL of carboxymethyl cellulose natrium (CMC Na) 1% solution orally without unfiltered cigarette smoke exposure, and group C+ (positive control) was given 0.5 mL of CMC Na 1% solution orally and unfiltered cigarette smoke exposure. Treatment groups T1, T2, and T3 were orally given fermented red bean extract at doses of 26 mg/kg Body weight (BW), 52 mg/kg BW, and 104 mg/kg BW, respectively, and then were exposed to unfiltered cigarette smoke. For 36 days, treatment groups (except the negative control) were subjected to the inhalation of smoke from an unfiltered cigarette containing a nicotine dose of 2.2 mg. The exposure period lasted for 20 minutes each day. Each group was put into a cigarette smoke-exposing box. The sperm motility (observing the forward movement of spermatozoa), the sperm viability (examining the color of the sperm head), and the sperm plasma membrane integrity (observing the tail shape using the hypoosmotic swelling test) were then evaluated. The findings indicated significant differences in sperm motility, viability, and plasma membrane integrity of each group with positive control. A dose of 104 mg/kg BW of fermented red bean extract had the best potential to maintain sperm motility (70%), viability (82.13%), and plasma membrane integrity (61.93%) of mice exposed to unfiltered cigarette smoke.

Effect of using Oil Shale Ash on geotechnical properties of cement-stabilized expansive soil for pavement applications

Expansive soil is considered an engineering problem that may cause cracks and distresses in structures and roads. Due to its swelling potential and low unconfined strength, expansive soil causes failures in structures and leads to financial losses. Oil Shale Ash “OSA” is the byproduct of the combustion of the oil shale rock to produce electricity. Instead of dumping OSA materials into landfills, which has several negative environmental implications and cost burdens, utilizing these materials as building materials might alleviate the environmental concerns caused by their disposal. This research investigates the possibility of experimentally using the by-products Oil Shale Ash (OSA) and Portland Cement (PC) to enhance the geotechnical properties of problematic expansive soil. OSA and cement have been added to the soil, where OSA is used in four percentages by dry weight of soil (10%, 20%, 25%, 30%), and cement is used in three percentages (2%, 4%, 6%). A laboratory test program was implemented, including Atterberg limits, compaction test, unconfined compressive strength test (UCS), swell test, linear shrinkage test, and California Bearing Ratio (CBR) test. The results showed that OSA and cement have reduced the expansive natural soil's swelling potential, plasticity index, and linear shrinkage. Also, the UCS and CBR values of treated soil have improved significantly. Pavement analyses demonstrated that OSA-cement-stabilized soil could be a suitable stabilization agent for the subgrade and base layers in constructing pavements.

Hyaluronic acid/diminazene aceturate combination ameliorates osteoarthritic anomalies in a rodent model: a role of the ACE2/Ang1-7/MasR axis

The implication of the tissue-localized renin-angiotensin system (RAS) in the pathogenesis of osteoarthritis (OA) has been documented in the last decades. A combination of intraarticular (IA) corticosteroid and hyaluronic acid (HYAL) is approved for pain relief in patients with mild to moderate OA. Combining HYAL with an activator of angiotensin-converting enzyme 2, diminazen aceturate (DIZE), was evaluated in this study for its therapeutic potential. Monosodium iodoacetate was used to induce OA. The effects of daily administration of DIZE versus once-per-week IA injection of HYAL and a combination of both drugs for 21 days on OA deformities in rats’ knees were observed. Evaluation of motor activities, pain, and inflammatory response was done using rotarod, knee bend, and knee swelling tests. RAS components, inflammatory biomarkers, and oxidative stress mediators were measured in the knee joint. X-ray radiological examination and histopathological investigations were used to assess joint degeneration and regeneration. Levels of both inflammatory and oxidative markers in knee joint homogenate of OA rats rose, and these increments were mostly improved by the three therapies with a more prominent effect of the drug combination, an effect that was also reflected in the behavioral tests. RAS markers have shown better responsiveness to the combination therapy over both drugs individually, showing a pronounced increase in the angiotensin 1–7 amount. Both radiological and histopathology investigations came to confirm the biochemical results, nominating a combination of HYAL and DIZE as a possible therapeutic option for OA.

A sustained‐release gel film based on chitosan for treating cutaneous candidiasis

AbstractHydrogels have been widely used in wound dressings owing to their biocompatibility and bacteriostatic properties. In this study, a chitosan‐citric acid gel film was prepared using chitosan as the raw material and citric acid as the acid solvent and cross‐linking agent. In addition, to increase the antibacterial effect of the gel film, ketoconazole/β‐cyclodextrin inclusion complex was prepared by inclusion technology and added to the gel film to prepare a chitosan‐citric acid sustained‐release gel film loaded with ketoconazole/β‐cyclodextrin inclusion complex for treating cutaneous candidiasis. The physical and chemical properties of the chitosan‐citric acid gel films were investigated using infrared spectroscopy, x‐ray diffraction, water vapor transmittance test, thermal analysis, and swelling tests. Drug release, antibacterial, and toxicity tests of the chitosan‐citric acid gel film loading with ketoconazole/β‐cyclodextrin inclusion complex were carried out in vitro. The composite film showed good sustained drug release behavior, antibacterial effects, and biocompatibility in vitro. These results support that the chitosan‐citric acid hydrogel has great potential as a gel wound dressing for the treatment of cutaneous candidiasis.

Inovasi Pembuatan Plafon Ramah Lingkungan dengan Substitusi Serat Daun Nanas dan Serbuk Daun Tembakau

Ceiling with a mixture of pineapple leaf fibers and tobacco powder as a substitute for gypsum flour is a new innovation that has physical and mechanical properties of ceilings that are better than conventional ceilings. The materials used in making this ceiling are gypsum flour, pineapple leaf fiber, tobacco leaf powder, epoxy resin, and distilled water. The types of tests carried out on this gypsum ceiling are flexural strength tests, density tests, thickness swelling tests, and water absorption tests. To compare between conventional ceilings and ceilings with added materials such as pineapple leaf fiber and tobacco leaf powder. The test was carried out after the gypsum ceiling reached the age of 7 days which was placed at room temperature. The flexural strength test was carried out with 5 specimens, while the thickness swelling test and water absorption test were carried out with 2 specimens. In the manufacture of this test object, there are as many as 3 variations, where variation A is a conventional ceiling which means 0% mixture. Then variation B with a mixture of 2% for pineapple leaf fiber and 1% for shot leaf powder. Furthermore, the last variation is variation C with a mixture of 5% pineapple leaf fiber and 1% tobacco leaf powder. The result of the test is that the optimal test object is produced with characteristics according to SNI 01-4449-2006, namely in variation B where variation B has a flexural strength value of 71.66% better than conventional ceilings, 0.79% better in density testing compared to conventional ceilings, and 4.7% better than the water absorption value of conventional ceilings.

Lysophosphatidic Acid Signalling Regulates Human Sperm Viability via the Phosphoinositide 3-Kinase/AKT Pathway.

Lysophosphatidic acid (LPA) signalling is essential for maintaining germ cell viability during mouse spermatogenesis; however, its role in human spermatozoa is unknown. We previously demonstrated that peroxiredoxin 6 (PRDX6) calcium-independent phospholipase A2 (iPLA2) releases lysophospholipids such as LPA or arachidonic acid (AA) and that inhibiting PRDX6 iPLA2 activity impairs sperm cell viability. The exogenous addition of LPA bypassed the inhibition of PRDX6 iPLA2 activity and maintained the active phosphoinositide 3-kinase (PI3K)/AKT pathway. Here, we aimed to study PI3K/AKT pathway regulation via LPA signalling and protein kinases in maintaining sperm viability. The localization of LPARs in human spermatozoa was determined using immunocytochemistry, and P-PI3K and P-AKT substrate phosphorylations via immunoblotting. Sperm viability was determined using the hypo-osmotic swelling test. LPAR1, 3, 5 and 6 were located on the sperm plasma membrane. The inhibition of LPAR1-3 with Ki16425 promoted the impairment of sperm viability and decreased the phosphorylation of PI3K AKT substrates. Inhibitors of PKC, receptor-type PTK and PLC impaired sperm viability and the PI3K/AKT pathway. Adding 1-oleoyl-2-acetyl-snglycerol (OAG), a cell-permeable analog of diacylglycerol (DAG), prevented the loss of sperm viability and maintained the phosphorylation of PI3K. In conclusion, human sperm viability is supported by LPAR signalling and regulated by PLC, PKC and RT-PTK by maintaining phosphorylation levels of PI3K and AKT substrates.

A Comprehensive Study on the Effect of Highly Thermally Conductive Fillers on Improving the Properties of SBR/BR-Filled Nano-Silicon Nitride.

The effect of silicon nitride (Si3N4) as a thermally conductive material on the mechanical, microstructural, and physical properties as well as kinetics of the curing reaction of styrene-butadiene rubber/butadiene rubber (SBR/BR) was investigated in this work. The results showed an improvement in tensile, hardness, and compression features of the composite due to the presence of Si3N4. The properties were enhanced with the filler loading content; somehow, the composite including Si3N4 = 6 parts per hundred (phr) had the most significant performance, an increase of ∼15 and 20% in the maximum strain and toughness of the composite, respectively, an increase of almost 7% in the hardness, and an ∼13% reduction in the compression set. Also, the filler led to an increase in the crosslink density (calculated via the Flory-Rehner equation using swelling test) by 7.12 × 10-5 mol/g, proving the increment of the covalent bonds between the polymer chains during the curing reaction. The kinetic consideration revealed a reduction in the scorch and optimum curing times by ∼40 and ∼25%, respectively. In order to describe the kinetics of curing reaction of SBR/BR-Si3N4, an autocatalytic model based on the Kamal-Sourour model was applied on the rheometry results. The calculated kinetic parameters indicated that the thermally conductive Si3N4 accelerated the curing reaction by ∼40%, particularly at Si3N4 = 6 phr. After 6 phr of Si3N4, agglomeration of the filler particles decreased its performance.

Effect of Beetroot Juice Supplementation on Muscle Soreness and Performance Recovery after Exercise-Induced Muscle Damage in Female Volleyball Players.

Beetroot juice (BRJ) contains various bioactive compounds suggested to be effective in improving athlete recovery. However, the number of studies evaluating the effects of BRJ on recovery and muscle soreness (MS) indicators in female athletes is limited. Therefore, the present study aimed to determine the effects of BRJ consumption on the performance recovery indicators and MS after exercise-induced muscle damage (EIMD) in female volleyball players. Twelve young female volleyball players were evaluated in this study. We utilized a randomized, cross-over, and double-blind design during two phases with a 30-day interval (wash-out). During each phase, EIMD was performed first, followed by BRJ or placebo (PLA) supplementation for two days (eight servings of 50 mL). Recovery monitoring of performance indicators and MS was performed after EIMD. The results of wall-sit, V sit and reach (VSFT), vertical jump height (VJH), pressure pain threshold (PPT), and thigh swelling (Sw-T) tests were recorded 48 h after EIMD. Also, the Perceived Muscle Soreness was recorded using the visual analog scale (VAS) 12 (MS-12 h), 24 (MS-24 h), and 48 (MS-48 h) hours after EIMD. The data were analyzed using two-way repeated measures of ANOVA at p < 0.05. Compared to PLA, BRJ supplementation improves wall-sit performance after EIMD (p < 0.05), while reducing Sw-T and perceived muscle soreness (p < 0.05). However, no significant difference was observed between PLA and BRJ in VJH and VSFT performance after EIMD (p > 0.05). Our findings indicate that the consumption of BRJ in female volleyball players can be useful for improving some recovery indicators, such as muscle endurance, perceived muscle soreness, and tissue edema, after EIMD.

Utilization of organoclay amended bentonite for hydraulic barrier applications under adverse electrolyte environment

Inorganic ions such as sodium and calcium are often found in industrial leachates, municipal solid waste leachates and deep geological repositories, which can significantly impact the geotechnical properties of hydraulic barrier materials. Researchers have suggested the utilization of organoclays as landfill liner amendments, especially when the liner is in contact with organic contaminants. This study focuses on the impact of inorganic salts (NaCl and CaCl2) on the geotechnical properties, such as consistency limits, swelling, and hydraulic conductivity of organoclay-amended bentonite (BOC) liners. Different concentrations of salt solutions (0, 0.1 N and 1 N) were selected for the execution of Atterberg limits, free swell tests, and oedometer tests. The surface charge characteristics of bentonite and organoclay were attained with the aid of zeta potential measurements. The variation in the surface topographies of soil samples at different electrolyte conditions was analyzed with the help of scanning electron microscope images. The addition of organoclays significantly reduced bentonite's swelling characteristics and liquid limit due to the unique hydrophobic and organophilic attributes of organoclay but increased the hydraulic conductivity. However, the influence of inorganic salts on the geotechnical parameters of organoclay-amended bentonites showed less variance than that of bentonite. Also, no soil samples exceeded the limiting hydraulic conductivity criteria required for landfill liners, i.e. 1 × 10−9 m/s. Hence, organoclay-amended bentonites could potentially be utilized for hydraulic barrier applications even in an electrolytic environment without compromising the hydraulic conductivity criteria.

Effect of calcined clay on the improvement of compaction, swell and microstructural characteristics of expansive soil

Expansive soil is problematic soil because its alternate swell shrink behaviour depends on the presence of water. Soil stabilization technique was widely adopted to alter the characteristics of the expansive soil which is suitable for construction. Among the various soil stabilization techniques, chemical stabilization was found to be more suitable method of sustainable stabilizing the soil due to its effective and timely reaction with the chemical compound. Calcined form of clay material is used as an admixture to study the effects on the improvement of soil properties. Calcined Clay (CC) is added into the virgin soil with different percentages of 2%,4%,6%,8% and 10% under varying 1,3,7,14,28 and 60 days of curing by conducting experiments such as standard proctor test, Free Swell test to analyse the compaction characteristics and swelling behaviour of the soil. In addition to that the X-Ray Diffraction (XRD) and Scanning Electron Microscope (SEM) on virgin and treated soil were studied by varying 2% incremental of CC up to 10% at 28 days of curing. From the test results it shows the variation in the compaction characteristics by rising in Maximum Dry Density (MDD) and reduction in Optimum Moisture Content (OMC) that merges at 8% as an optimum to develop the soil behaviour and from the free swell test, it was found that the Free Swell Index (FSI) of the soil decrease from 210 to 80 at 10% calcined clay added soil and the Mineralogical studies also show the variation in the compounds. Thus, this naturally available calcined clay was used to improve the soil Compaction and swell characteristics that influences the reduction in deformation and increase in shear strength of soil which helped to minimize the environmental problem as well as one of the effective admixtures to improve the expansive soil characteristics.

Re-Assemblable, Recyclable, and Self-Healing Epoxy Resin Adhesive Based on Dynamic Boronic Esters.

Thermosetting adhesives are commonly utilized in various applications. However, covalent cross-linked networks prevent thermosetting adhesives from being re-assembled, which necessitates higher machining precision. Additionally, the primary raw materials used in adhesive preparation are derived from non-renewable petroleum resources, which further constrain adhesive development. In this study, a recyclable adhesive was developed by incorporating dynamic boronic esters into epoxy resin derived from soybean oil. The successful synthesis of epoxidized soybean oil and boronic esters was confirmed through the analysis of proton nuclear magnetic resonance spectra and differential scanning calorimetry results. Swelling tests and tensile curves demonstrated the presence of covalently cross-linked networks. Self-healing and reprocessing experiments indicated that the cross-linked network topology could be re-assembled under mild conditions.

Low-density lipoproteins, resveratrol and quercetin as alternative additives to improve boar semen cooling.

Low-density lipoproteins (LDL), quercetin (Q) and resveratrol (R) have been used for sperm preservation to improve sperm quality in different species. To evaluate the effects of LDL, Q and R during the cooling of boar semen. Fifteen boar semen samples were diluted in a BTS extender supplemented with the treatments: LDL at 6%, Q at 10 μM (Q10), 30 μM (Q30) and 50 μM (Q50), or R at 10 μM (R10), 30 μM (R30) and 50 μM. A control without supplementation was included. The semen was stored by cooling at 16°C for 96 h. Every 24 h, sperm motility and kinetics were evaluated using a computer-assisted sperm analyzer (IVOS). At 24 and 96 h of cooling, functional membrane integrity and mitochondrial membrane potential (ΔΨM) of sperm were evaluated by the hypoosmotic swelling test (HOST) an flow cytometry with JC-1 probe, respectively, LDL improved progressive motility of sperm during cooling. Likewise, LDL increased average path velocity (VAP) and straight-line velocity (VSL) and/or curvilinear velocity (VCL) during the first 48 h of cooling. The use of Q between 10 and 30 μM caused a reduction in total motility, progressive motility and amplitude of the lateral head displacement during the entire cooling period, as well as a decrease in VAP, VSL and VCL at 96 h of cooling. LDL, Q10, Q30 and Q50 modulated mitochondrial activity by reducing high-ΔΨM sperm at 0 and 96 h of cooling. During the cooling of the boar semen prior to artificial insemination, the parameters of sperm quality that could influence fertility decrease; however, the inclusion of antioxidants and additives that protect the plasma membrane, such as LDL, could mitigate the damaging effects on spermatozoa. It is concluded that LDL can improve the motility and kinetics of boar semen during cooling while it could modulating the sperm's mitochondrial activity. On the contrary, Q could alter the motility and kinetics of boar sperm during the cooling period.

MWCNTs Decorated with TiO2 as Highly Performing Filler in the Preparation of Nanocomposite Membranes for Scalable Photocatalytic Degradation of Bisphenol A in Water.

Bisphenol A (BPA), an endocrine-disrupting compound with estrogenic behavior, is of great concern within the scientific community due to its high production levels and increasing concentration in various surface aquifers. While several materials exhibit excellent capacity for the photocatalytic degradation of BPA, their powdered nature and poor chemical stability render them unsuitable for practical application in large-scale water decontamination. In this study, a new class of nanocomposite membranes based on sulfonated polyethersulfone (sPES) and multiwalled carbon nanotubes decorated with TiO2 nanoparticles (MWCNTs-TiO2) were investigated as efficient and scalable photocatalysts for the photodegradation of BPA in aqueous solutions. The MWCNTs-TiO2 hybrid material was prepared through a facile and inexpensive hydrothermal method and extensively characterized by XRD, Raman, FTIR, BET, and TGA. Meanwhile, nanocomposite membranes at different filler loadings were prepared by a simple casting procedure. Swelling tests and PFG NMR analyses provided insights into the impact of filler introduction on membrane hydrophilicity and water molecular dynamics, whereas the effectiveness of the various photocatalysts in BPA removal was monitored using HPLC. Among the different MWCNTs-TiO2 content nanocomposites, the one at 10 wt% loading (sP-MT10) showed the best photoactivity. Under UV irradiation at 254 nm and 365 nm for 240 min, photocatalytic oxidation of 5 mg/L bisphenol A by sP-MT10 resulted in 91% and 82% degradation, respectively. Both the effect of BPA concentration and the membrane regenerability were evaluated, revealing that the sP-MT10 maintained its maximum BPA removal capability over more than 10 cycles. Our findings indicate that sP-MT nanocomposite membranes are versatile, scalable, efficient, and highly reusable photocatalysts for the degradation of BPA, as well as potentially for other endocrine disruptors.