Surface Of Lipid Bilayer Research Articles

Buffering agents modify the hydration landscape at charged interfaces.

Buffering agents are widely used to stabilise the pH of solutions in soft matter and biological sciences. They are typically composed of weak acids and bases mixed in an aqueous solution, and can interact electrostatically with charged surfaces such as biomembranes. Buffers can induce protein aggregation and structural modification of soft interfaces, but a molecular-level picture is still lacking. Here we use high-resolution atomic force microscopy to investigate the effect of five commonly used buffers, namely 4-(2-hydroxyethyl)piperazine-1-ethanesulfonic acid (HEPES), 2-(N-morpholino)ethanesulfonic acid (MES), monosodium phosphate, saline sodium citrate (SSC) and tris(hydroxymethyl)aminomethane (Tris) on the hydration landscape of Muscovite mica in solution. Mica is an ideal model substrate due to its negative surface charge and identical lattice parameter when compared with gel-phase lipid bilayers. We show that buffer molecules can produce cohesive aggregates spanning over tens of nanometres of the interface. SSC, Tris and monosodium phosphate tend to create an amorphous mesh layer several molecules thick and with no preferential ordering. In contrast, MES and HEPES adopt epitaxial arrangements commensurate with the underlying mica lattice, suggesting that they offer the most suitable solution for high-resolution studies. To confirm that this effect persisted in biologically-relevant interfaces, the experiments were repeated on a silica-supported lipid bilayer. Similar trends were observed for this system using atomic force microscopy as well as ellipsometry. The effect of the buffering agents can be mitigated by the inclusion of salt which helps displace them from the interface.

Anomalous Dynamics of a Lipid Recognition Protein on a Membrane Surface.

Pleckstrin homology (PH) domains are lipid-binding modules present in peripheral membrane proteins which interact with phosphatidyl-inositol phosphates (PIPs) in cell membranes. We use multiscale molecular dynamics simulations to characterize the localization and anomalous dynamics of the DAPP1 PH domain on the surface of a PIP-containing lipid bilayer. Both translational and rotational diffusion of the PH domain on the lipid membrane surface exhibit transient subdiffusion, with an exponent α ≈ 0.5 for times of less than 10 ns. In addition to a PIP3 molecule at the canonical binding site of the PH domain, we observe additional PIP molecules in contact with the protein. Fluctuations in the number of PIPs associated with the PH domain exhibit 1/f noise. We suggest that the anomalous diffusion and long-term correlated interaction of the PH domain with the membrane may contribute to an enhanced probability of encounter with target complexes on cell membrane surfaces.

Supramolecular Protein Immobilization on Lipid Bilayers.

Protein immobilization on surfaces, and on lipid bilayers specifically, has great potential in biomolecular and biotechnological research. Of current special interest is the immobilization of proteins using supramolecular noncovalent interactions. This allows for a reversible immobilization and obviates the use of harsh ligation conditions that could denature fragile proteins. In the work presented here, reversible supramolecular immobilization of proteins on lipid bilayer surfaces was achieved by using the host-guest interaction of the macrocyclic molecule cucurbit[8]uril. A fluorescent protein was successfully immobilized on the lipid bilayer by making use of the property of cucurbit[8]uril to host together a methylviologen and the indole of a tryptophan positioned on the N-terminal of the protein. The supramolecular complex was anchored to the bilayer through a cholesterol moiety that was attached to the methylviologen tethered with a small polyethylene glycol spacer. Protein immobilization studies using a quartz crystal microbalance (QCM) showed the assembly of the supramolecular complexes on the bilayer. Specific immobilization through the protein N-terminus is more efficient than through protein side-chain events. Reversible surface release of the proteins could be achieved by washing with cucurbit[8]uril or buffer alone. The described system shows the potential of supramolecular assembly of proteins and provides a method for site-specific protein immobilization under mild conditions in a reversible manner.

Relaxation of Loaded ESCRT-III Spiral Springs Drives Membrane Deformation

SummaryESCRT-III is required for lipid membrane remodeling in many cellular processes, from abscission to viral budding and multi-vesicular body biogenesis. However, how ESCRT-III polymerization generates membrane curvature remains debated. Here, we show that Snf7, the main component of ESCRT-III, polymerizes into spirals at the surface of lipid bilayers. When covering the entire membrane surface, these spirals stopped growing when densely packed: they had a polygonal shape, suggesting that lateral compression could deform them. We reasoned that Snf7 spirals could function as spiral springs. By measuring the polymerization energy and the rigidity of Snf7 filaments, we showed that they were deformed while growing in a confined area. Furthermore, we observed that the elastic expansion of compressed Snf7 spirals generated an area difference between the two sides of the membrane and thus curvature. This spring-like activity underlies the driving force by which ESCRT-III could mediate membrane deformation and fission.

High Membrane Curvature Enhances Binding, Conformational Changes, and Fibrillation of Amyloid-β on Lipid Bilayer Surfaces

Aggregation of the amyloid-β (Aβ) protein and the formation of toxic aggregates are the possible pathogenic pathways in Alzheimer's disease. Accumulating evidence suggests that lipid membranes play key roles in protein aggregation, although the intermolecular forces that drive the interactions between Aβ-(1-40) and the membranes vary in different membrane systems. Here, we observed that a high positive curvature of lipid vesicles with diameters of ∼30 nm enhanced the association of Aβ with anionic phosphatidylglycerol membranes in the liquid-crystalline phase and with zwitterionic phosphatidylcholine membranes in the gel phase. The binding modes of Aβ to these membranes differ in terms of the location of the protein on the membrane and of the protein secondary structure. The fibrillation of Aβ was accelerated in the presence of the vesicles and at high protein-to-lipid ratios. Under these conditions, the protein accumulated on the surfaces, as demonstrated by a high (10(7) M(-1)) binding constant. Our findings suggest that packing defects on membranes with high curvatures, such as the intraluminal vesicles in multivesicular bodies and the exosomes, might result in the accumulation of toxic protein aggregates.

Defining the structural characteristics of annexin V binding to a mimetic apoptotic membrane.

Annexin V is of crucial importance for detection of the phosphatidylserine of apoptotic cell membranes. However, the manner in which different amounts of phosphatidylserine at the membrane surface at different stages of apoptosis contribute to binding of annexin V is unclear. We have used a quartz crystal microbalance combined with dissipative monitoring (QCM-D) and neutron reflectivity to characterize binding of human annexin V to supported bilayers of different phospholipid composition. We created model apoptotic bilayers of 1-palmitoyl-2-oleoyl-sn-glycerophosphocholine and 1-palmitoyl-2-oleoyl-sn-glycerophosphoserine (POPS) in the ratios 19:1, 9:1, 6.7:1, 4:1, 3:1, and 2:1 (w/w) in the presence of 2.5 mM CaCl2. QCM-D data revealed that annexin V bound less to supported fluid lipid bilayers with higher POPS content (>25 % POPS). Neutron reflectivity was used to further characterize the detailed composition of lipid bilayers with membrane-bound annexin V. Analysis confirmed less annexin V binding with higher POPS content, that bound annexin V formed a discrete layer above the lipid bilayer with little effect on the overall structure of the membrane, and that the thickness and volume fraction of the annexin V layer varied with POPS content. From these results we show that the POPS content of the outer surface of lipid bilayers affects the structure of membrane-bound annexin V.

Dynamics of the Peripheral Membrane Protein P2 from Human Myelin Measured by Neutron Scattering—A Comparison between Wild-Type Protein and a Hinge Mutant

Myelin protein P2 is a fatty acid-binding structural component of the myelin sheath in the peripheral nervous system, and its function is related to its membrane binding capacity. Here, the link between P2 protein dynamics and structure and function was studied using elastic incoherent neutron scattering (EINS). The P38G mutation, at the hinge between the β barrel and the α-helical lid, increased the lipid stacking capacity of human P2 in vitro, and the mutated protein was also functional in cultured cells. The P38G mutation did not change the overall structure of the protein. For a deeper insight into P2 structure-function relationships, information on protein dynamics in the 10 ps to 1 ns time scale was obtained using EINS. Values of mean square displacements mainly from protein H atoms were extracted for wild-type P2 and the P38G mutant and compared. Our results show that at physiological temperatures, the P38G mutant is more dynamic than the wild-type P2 protein, especially on a slow 1-ns time scale. Molecular dynamics simulations confirmed the enhanced dynamics of the mutant variant, especially within the portal region in the presence of bound fatty acid. The increased softness of the hinge mutant of human myelin P2 protein is likely related to an enhanced flexibility of the portal region of this fatty acid-binding protein, as well as to its interactions with the lipid bilayer surface requiring conformational adaptations.

Carbohydrate-derived amphiphilic macromolecules: a biophysical structural characterization and analysis of binding behaviors to model membranes.

The design and synthesis of enhanced membrane-intercalating biomaterials for drug delivery or vascular membrane targeting is currently challenged by the lack of screening and prediction tools. The present work demonstrates the generation of a Quantitative Structural Activity Relationship model (QSAR) to make a priori predictions. Amphiphilic macromolecules (AMs) “stealth lipids” built on aldaric and uronic acids frameworks attached to poly(ethylene glycol) (PEG) polymer tails were developed to form self-assembling micelles. In the present study, a defined set of novel AM structures were investigated in terms of their binding to lipid membrane bilayers using Quartz Crystal Microbalance with Dissipation (QCM-D) experiments coupled with computational coarse-grained molecular dynamics (CG MD) and all-atom MD (AA MD) simulations. The CG MD simulations capture the insertion dynamics of the AM lipophilic backbones into the lipid bilayer with the PEGylated tail directed into bulk water. QCM-D measurements with Voigt viscoelastic model analysis enabled the quantitation of the mass gain and rate of interaction between the AM and the lipid bilayer surface. Thus, this study yielded insights about variations in the functional activity of AM materials with minute compositional or stereochemical differences based on membrane binding, which has translational potential for transplanting these materials in vivo. More broadly, it demonstrates an integrated computational-experimental approach, which can offer a promising strategy for the in silico design and screening of therapeutic candidate materials.

Ionizable Nitroxides for Studying Local Electrostatic Properties of Lipid Bilayers and Protein Systems by EPR.

Electrostatic interactions are known to play a major role in the myriad of biochemical and biophysical processes. Here, we describe biophysical methods to probe local electrostatic potentials of proteins and lipid bilayer systems that are based on an observation of reversible protonation of nitroxides by electron paramagnetic resonance (EPR). Two types of probes are described: (1) methanethiosulfonate derivatives of protonatable nitroxides for highly specific covalent modification of the cysteine's sulfhydryl groups and (2) spin-labeled phospholipids with a protonatable nitroxide tethered to the polar head group. The probes of both types report on their ionization state through changes in magnetic parameters and degree of rotational averaging, thus, allowing the electrostatic contribution to the interfacial pKa of the nitroxide, and, therefore, the local electrostatic potential to be determined. Due to their small molecular volume, these probes cause a minimal perturbation to the protein or lipid system. Covalent attachment secures the position of the reporter nitroxides. Experimental procedures to characterize and calibrate these probes by EPR, and also the methods to analyze the EPR spectra by simulations are outlined. The ionizable nitroxide labels and the nitroxide-labeled phospholipids described so far cover an exceptionally wide range of ca. 2.5-7.0 pH units, making them suitable to study a broad range of biophysical phenomena, especially at the negatively charged lipid bilayer surfaces. The rationale for selecting proper electrostatically neutral interface for probe calibration, and examples of lipid bilayer surface potential studies, are also described.

Effect of Phosphatidylinositol-Bisphosphate (PIP2) Lipids on Membrane Structure and Forces

It is widely accepted that the interaction between lipid bilayers at closest separation is dominated by a repulsive hydration force arising from the structuring of water molecules on the lipid bilayer surface. This force has been recognized as a major activation energy barrier preventing fusion of bilayers. Our working hypothesis is that the orientation of the hydrogen bond network on the bilayer surface determines the amplitude of the hydration force. We are testing this hypothesis using the 1,2-dioleoyl-sn-glycero-3-phospho-[1′-myo-inositol-4’,5′-bisphosphate](PI(4,5)P2) lipid and its isomers which differ in the position of phosphate groups on the inositol ring. Phosphatidylinositol-bisphosphate (PIP2) lipids are pivotal in signaling and play an important role in exocytosis. Specifically, we have utilized small angle X-ray diffraction (SAXS) and monitored the structural consequences of osmotic pressure in multilamellar suspensions of dioleoylphosphatidylcholine (DOPC) in the presence of PI(4,5)P2. Our preliminary data (powder X-ray diffraction and reconstructed electron density profiles) show that there are notable changes in bilayer structure, particularly the lamellar repeat distance, thickness, and forces in the presence of PI(4,5)P2. We are currently investigating whether the effects of PIP2 lipids are dependent on the phosphate group position, ionic strength, and temperature. Since the relative position of the hydrogen bond acceptor in phosphates are determined by their exact molecular structure, our results will be relevant in the context of molecular recognition involving PIP2 lipids.

Anomalous Dynamics of Pleckstrin Homology Domains on Lipid Membrane Surfaces

Association and diffusion of peripheral proteins to the cell membrane during many signaling and trafficking events in the cell occurs via lipid-binding modules e.g. pleckstrin homology (PH) domains. PH domains are a highly structurally conserved family of proteins which is believed to associate with various phosphatidyl inositol phosphates (PIPs) molecules in the plasma membrane thus initiating multiple signaling cascades. Despite the available structural and functional data for a variety of different PH domains the diffusive and interacting dynamics of these proteins with the lipid membrane and in particular with PIP molecules has been veiled. Using a coarse-grained molecular dynamics simulation approach, we investigate the localization and dynamic of different PH domains on a lipid bilayer surface of complex phospholipid composition. Our results demonstrate that the different PH domains associate with the PIP molecules in the membrane via a highly positively charged loop in good agreement with available experimental data. We also show that translational and rotational diffusion of PH domains on the lipid membrane surface exhibit transient sub-diffusion. Moreover, we find that fluctuations of the number of PIPs binding with the PH domains exhibit 1/f noise. Constructing a dichotomous process for the number of the PIPs, we find that the process can be regarded as a correlated renewal process where residence times are correlated.

Self-reproduction of nanoparticles through synergistic self-assembly.

We describe a self-reproduction mechanism of nanometer-sized particles (i.e., nanodiscs) through chemical ligation of the precursors and self-assembly of the building blocks. The ligation reaction was accelerated on lipid bilayer surfaces, and the products spontaneously assembled into nanodiscs with lipid molecules. With the increase in the number of nanodiscs, a rapid proliferation of the nanodiscs occurred through the spatial rearrangements of the molecules between the pre-existing nanodiscs and the unreacted materials, rather than template- or complex-enhanced ligation of the precursors. The subsequent process of surface-enhanced ligation of integrated precursors matured the nanoparticles into identical copies of the pre-existing assembly. Our study showed that the synergistic self-assembly mechanism probably underlie the self-replication principles for heterogeneous multimolecular systems.

Soft perforation of cardiolipin-containing planar lipid bilayer membrane by cytochrome c and H(2)O(2).

The release of cytochrome c (cyt c) from mitochondria is responsible for initiation of cell apoptosis. Although extramitochondrial proteins are thought to initiate this release, the exact mechanism remains unclear. Cyt c binds to and penetrates lipid bilayer membranes of specific phospholipid cardiolipin (CL) contained in mitochondria. We present here the experimental results of monitoring planar BLM (pBLM) from mixtures of azolectin and of CL (4/1 by moles) by triangle voltage pulses of 100 mV in amplitude and frequency of 2 Hz. The BLM were modified by a successive addition of cyt c and of H(2)O(2) in water solution. It is shown that the addition of cyt c alone leads to a stepwise increase in the ionic conductance of the pBLM, indicating the appearance of transmembrane pores. Pore lifetimes then reached several seconds at an average pore diameter of ~2 nm. Current-voltage characteristics were then linear and passed through the origin which is characteristic for broad, nonselective ion pores. Subsequent addition of H(2)O(2) caused a dramatic increase in transmembrane current at retention of average pore size constant. Observed increase in membrane current is due to growth of a number of pores in an open state. We suggest that hydrogen peroxide in the presence of cyt c promotes a peroxidation of membrane phospholipids to form lysolipids, the embedding of which stabilizes the edge of the pore and the surface of lipid bilayer.

Highly hydrated deformable polyethylene glycol-tethered lipid bilayers.

The realization of a solid-supported lipid bilayer acting as a workbench for the study of membrane processes is a difficult task. For robustness, the bilayer has to be tethered to the substrate. At the same time, diffusion of the lipids and plastic deformations of the membrane should not be obstructed. Furthermore, a highly hydrated surrounding is mandatory. Here, we show that grafting of a polyethylene glycol-lipid construct (PEG2000-DSPE) to a silicon oxide surface via multiple-step silane chemistry and subsequent deposition of lipids by spin-coating result in a cushioned membrane that has the desired properties. Neutron and X-ray reflectometry measurements are combined to access thickness, density, and hydration of the bilayer and the PEG cushion. We observe a spacer of 55 Å thickness between lipid bilayer and silicon-oxide surface with a rather high hydration of up to 90 ± 3% water. While 11.5 ± 3% of the lipids are grafted to the surface, as determined from the neutron data, the diffusion constant of the lipids, as probed by diffusion of 0.5% Texas Red labeled lipids, remains rather large (D = 2.1 ± 0.1 μm(2)/s), which is a reduction of only 12% compared to a supported lipid bilayer reference without immobilized lipids. Finally, AFM indentation confirms the plastic behavior of the membrane against deformation. We show that rupture of the bilayer does not occur before the deformation exceeds 40 Å. Altogether, the presented PEG-tethered lipid bilayer mimics the deformability of natural cell membranes much better than standard solid-supported lipid bilayers.

Preparation of mica supported lipid bilayers for high resolution optical microscopy imaging.

Supported lipid bilayers (SLBs) are widely used as a model for studying membrane properties (phase separation, clustering, dynamics) and its interaction with other compounds, such as drugs or peptides. However SLB characteristics differ depending on the support used. Commonly used techniques for SLB imaging and measurements are single molecule fluorescence microscopy, FCS and atomic force microscopy (AFM). Because most optical imaging studies are carried out on a glass support, while AFM requires an extremely flat surface (generally mica), results from these techniques cannot be compared directly, since the charge and smoothness properties of these materials strongly influence diffusion. Unfortunately, the high level of manual dexterity required for the cutting and gluing thin slices of mica to the glass slide presents a hurdle to routine use of mica for SLB preparation. Although this would be the method of choice, such prepared mica surfaces often end up being uneven (wavy) and difficult to image, especially with small working distance, high numerical aperture lenses. Here we present a simple and reproducible method for preparing thin, flat mica surfaces for lipid vesicle deposition and SLB preparation. Additionally, our custom made chamber requires only very small volumes of vesicles for SLB formation. The overall procedure results in the efficient, simple and inexpensive production of high quality lipid bilayer surfaces that are directly comparable to those used in AFM studies.

Intercalation of Bovine Serum Albumin Coated Gold Clusters Between Phospholipid Bilayers: Temperature-Dependent Behavior of Lipid-AuQC@BSA Assemblies with Red Emission and Superlattice Structure

A method has been developed to encapsulate bovine serum albumin (BSA)-coated gold quantum clusters (AuQC@BSA) in a multilamellar system of dipalmitoylphosphatidylcholine (DPPC). Results have shown that intercalation of AuQC@BSA particles into lipid bilayers occurs in the presence of CaCl2. Intense red photoluminescence emission was observed after encapsulation of the clusters. A well-defined structure was found with periodic distances drastically larger than that in the pure DPPC/water system. Although Ca(2+) ions can change the dipole characteristics of the lipid bilayer surface, leading to unbinding between the bilayers of multilamellar DPPC/water system, the repulsion is shielded in the presence of AuQC@BSA particles. A coherent superlattice structure evolves due to mixed Ca(2+)-DPPC and Ca(2+)-AuQC@BSA interactions. Studies at different temperatures have suggested a correlation between the luminescence properties of the clusters and phase transition of the lipid layers. The temperature-dependent behavior assumes the connection between the coating and the lipid bilayer surface. Temperature-dependent features of lipid intercalated Au clusters provide new opportunities in their application.

Dynamic Assembly/Disassembly Processes of Photoresponsive DNA Origami Nanostructures Directly Visualized on a Lipid Membrane Surface

Here, we report the direct visualization of the assembly/disassembly processes of photoresponsive DNA origami nanostructures which can be placed on a lipid bilayer surface. The observation relies on controlled interactions between the bilayer components and cholesterol moieties introduced to the hexagonal origami structures, one of whose outer edges carries Azo-ODNs. The bilayer-placed hexagonal dimer was disassembled into monomer units by UV irradiation, and reversibly assembled again during visible light irradiation. These dynamic processes were directly monitored with high-speed atomic force microscopy. The successful application of our approach should facilitate studies of interactive and functional behaviors of various DNA nanostructures.

Molecular Dynamics Studies of PEGylated Antimicrobial Peptides with Lipid Bilayers

We performed all-atom molecular dynamics (MD) simulations of polyethylene glycol (PEG)-grafted magainin 2 and tachyplesin I with lipid bilayers. In the simulations of PEGylated magainin 2 and tachyplesin I in water, both peptides are wrapped by PEG chains because of the interaction between oxygens of PEGs and the cationic residues of peptides. The α-helical structure of PEGylated magainin 2 is broken, while β-sheet of PEGylated tachyplesin I keeps stable, similar to the structural behavior of unPEGylated peptides, in agreement with experiments. Simulations of PEGylated peptides with lipid bilayers show that PEG chains block the electrostatic interaction between cationic residues of peptides and anionic phosphates of lipids, leading to the less binding of the peptide to the bilayer surface, which is observed more significantly for magainin 2 than for tachyplesin I. Since the random-coiled magainin 2 can be more completely covered by PEGs than does the β-sheet tachyplesin I, the PEGylation effect on the decreased binding is larger for magainin 2, showing the dependence of PEGylation on the peptide structure. These results qualitatively support that PEGylated magainin 2 and tachyplesin I have the different extents of the membrane-permeabilizing activity on lipid bilayer surface.

B Cell Receptor Clustering and Signaling Activation are Modulated by Physical Parameters of the Surface

Antigen binding to the B cell receptor (BCR) induces receptor aggregation into signaling microclusters, actin dynamics and cell spreading, which trigger B cell signaling activation. Recent studies have shown that gathering of surface attached antigen is important for B cell signaling. B cells gather antigen from a variety of sources which may have different physical characteristics such as mobility, stiffness or topography. However, the effect of these parameters on BCR clustering and signaling activation is not understood. We have studied the interaction of B cells with BCR ligand coated surfaces to investigate the physical parameters affecting BCR microcluster formation, cell spreading and signaling activation. Using high-resolution TIRF microscopy of live cells, we followed the movement and spatial organization of BCR clusters and the dynamics of actin as well as the associated signaling on surfaces with different physical properties. Using glass and lipid bilayer surfaces, we found that both immobile and mobile ligands are able to crosslink BCRs and induce clustering. However, B cells interacting with mobile ligands (on lipid bilayer) displayed greater signaling than those interacting with immobile ligands (on glass). Quantitative analysis revealed that mobile ligands enabled BCR clusters to move farther and merge more efficiently than immobile ligands. We also investigated the effect of substrate topography and substrate stiffness on BCR and actin dynamics. Quantitative analysis showed that these parameters were associated with differences in actin remodeling and spreading behavior. Our results indicate that B cells are highly sensitive to a range of physical parameters during cell spreading and signaling activation.

Ligand Mobility Regulates B Cell Receptor Clustering and Signaling Activation

Antigen binding to the B cell receptor (BCR) induces receptor clustering, cell spreading, and the formation of signaling microclusters, triggering B cell activation. Although the biochemical pathways governing early B cell signaling have been well studied, the role of the physical properties of antigens, such as antigen mobility, has not been fully examined. We study the interaction of B cells with BCR ligands coated on glass or tethered to planar lipid bilayer surfaces to investigate the differences in B cell response to immobile and mobile ligands. Using high-resolution total internal reflection fluorescence (TIRF) microscopy of live cells, we followed the movement and spatial organization of BCR clusters and the associated signaling. Although ligands on either surface were able to cross-link BCRs and induce clustering, B cells interacting with mobile ligands displayed greater signaling than those interacting with immobile ligands. Quantitative analysis revealed that mobile ligands enabled BCR clusters to move farther and merge more efficiently than immobile ligands. These differences in physical reorganization of receptor clusters were associated with differences in actin remodeling. Perturbation experiments revealed that a dynamic actin cytoskeleton actively reorganized receptor clusters. These results suggest that ligand mobility is an important parameter for regulating B cell signaling.