Surface-tethered Probes Research Articles

Semiautomated Electrochemical Melting Curve Analysis Device for the Detection of an Osteoporosis Associated Single Nucleotide Polymorphism in Blood.

The detection of single nucleotide polymorphisms (SNPs) is of increasing importance in many areas including clinical diagnostics, patient stratification for pharmacogenomics, and advanced forensic analysis. In the work reported, we apply a semiautomated system for solid-phase electrochemical melting curve analysis (éMCA) for the identification of the allele present at a specific SNP site associated with an increased risk of bone fracture and predisposition to osteoporosis. Asymmetric isothermal recombinase polymerase amplification using ferrocene labeled forward primers was employed to generate single stranded redox labeled amplicons. In a first approach to demonstrate the proof of concept of combining asymmetric RPA with solid-phase éMCA, a simplified system housing a multielectrode array within a polymeric microsystem, sandwiched between two aluminum plates of a heater device, was used. Sample manipulation through the microfluidic channel was controlled by a syringe pump, and an external Ag/AgCl reference electrode was employed. Individual electrodes of the array were functionalized with four different oligonucleotide probes, each probe equivalent in design with the exception of the middle nucleotide. The isothermally generated amplicons were allowed to hybridize to the surface-tethered probes and subsequently subjected to a controlled temperature ramp, and the melting of the duplex was monitored electrochemically. A clear difference between the fully complementary and a single mismatch was observed. Having demonstrated the proof-of-concept, a device for automated éMCA with increased flexibility to house diverse electrode arrays with internal quasi-gold reference electrodes, higher resolution, and broader melting temperature range was developed and exploited for the detection of SNP hetero/homozygosity. Using the optimized conditions, the system was applied to the identification of the allele present at an osteoporosis associated SNP site, rs2741856, in 10 real fingerprick/venous blood samples, with results validated using Sanger sequencing.

Electrochemical Detection of Single-Nucleotide Polymorphism Associated with Rifampicin Resistance in Mycobacterium tuberculosis Using Solid-Phase Primer Elongation with Ferrocene-Linked Redox-Labeled Nucleotides.

Here, we report the electrochemical detection of single-point mutations using solid-phase isothermal primer elongation with redox-labeled oligonucleotides. A single-base mutation associated with resistance to rifampicin, an antibiotic commonly used for the treatment of Mycobacterium tuberculosis, was used as a model system to demonstrate a proof-of-concept of the approach. Four 5′-thiolated primers, designed to be complementary with the same fragment of the target sequence and differing only in the last base, addressing the polymorphic site, were self-assembled via chemisorption on individual gold electrodes of an array. Following hybridization with single-stranded DNA, Klenow (exo-) DNA polymerase-mediated primer extension with ferrocene-labeled 2′-deoxyribonucleoside triphosphates (dNFcTPs) was only observed to proceed at the electrode where there was full complementarity between the surface-tethered probe and the target DNA being interrogated. We tested all four ferrocenylethynyl-linked dNTPs and optimized the ratio of labeled/natural nucleotides to achieve maximum sensitivity. Following a 20 min hybridization step, Klenow (exo-) DNA polymerase-mediated primer elongation at 37 °C for 5 min was optimal for the enzymatic incorporation of a ferrocene-labeled nucleotide, achieving unequivocal electrochemical detection of a single-point mutation in 14 samples of genomic DNA extracted from Mycobacterium tuberculosis strains. The approach is rapid, cost-effective, facile, and can be extended to multiplexed electrochemical single-point mutation genotyping.

Ferrocene-Containing DNA Monolayers: Influence of Electrostatics on the Electron Transfer Dynamics.

A 153-mer target DNA was amplified using ethynyl ferrocene dATP and a tailed forward primer resulting in a duplex with a single-stranded DNA tail for hybridization to a surface-tethered probe. A thiolated probe containing the sequence complementary to the tail as well as a 15 polythimine vertical spacer with a (CH2)6 spacer was immobilized on the surface of a gold electrode and hybridized to the ferrocene-modified complementary strand. Potential step chronoamperometry and cyclic voltammetry were used to probe the potential of zero charge, PZC, and the rate of heterogeneous electron transfer between the electrode and the immobilized ferrocene moieties. Chronoamperometry gives three, well-resolved exponential current–time decays corresponding to ferrocene centers located within 13 Å (4 bases) along the duplex. Significantly, the apparent standard heterogeneous electron transfer rate constant, kappo, observed depends on the initial potential, i.e., the rate of electron transfer at zero driving force is not the same for oxidation and reduction of the ferrocene labels. Moreover, the presence of ions, such as Sr2+, that strongly ion pair with the negatively charged DNA backbone modulates the electron transfer rate significantly. Specifically, kappo = 246 ± 23.5 and 14 ± 1.2 s–1 for reduction and oxidation, respectively, where the Sr2+ concentration is 10 mM, but the corresponding values in 1 M Sr2+ are 8 ± 0.8 and 150 ± 12 s–1. While other factors may be involved, these results are consistent with a model in which a low Sr2+ concentration and an initial potential that is negative of the PZC lead to electrostatic repulsion of the negatively charged DNA backbone and the negatively charged electrode. This leads to the DNA adopting an extended configuration (concertina open), resulting in a slow rate of heterogeneous electron transfer. In contrast, for ferrocene reduction, the initial potential is positive of PZC and the negatively charged DNA is electrostatically attracted to the electrode (concertina closed), giving a shorter electron transfer distance and a higher rate of heterogeneous electron transfer. When the Sr2+ concentration is high, the charge on the DNA backbone is compensated by the electrolyte and the charge on the electrode dominates the electron transfer dynamics and the opposite potential dependence is observed. These results open up the possibility of electromechanical switching using DNA superstructures.

A miRNA biosensor based on localized surface plasmon resonance enhanced by surface-bound hybridization chain reaction

The dysregulation of the concentration of individual circulating microRNAs or small sets of them has been recognized as a marker of disease. For example, an increase of the concentration of circulating miR-17 has been linked to lung cancer and metastatic breast cancer, while its decrease has been found in multiple sclerosis and gastric cancer. Consequently, techniques for the fast, specific and simple quantitation of microRNAs are becoming crucial enablers of early diagnosis and therapeutic follow-up. DNA based biosensors can serve this purpose, overcoming some of the drawbacks of conventional lab-based techniques. Herein, we report a cost-effective, simple and robust biosensor based on localized surface plasmon resonance and hybridization chain reaction. Immobilized gold nanoparticles are used for the detection of miR-17. Specificity of the detection was achieved by the use of hairpin surface-tethered probes and the hybridization chain reaction was used to amplify the detection signal and thus extend the dynamic range of the quantitation. Less than 1 h is needed for the entire procedure that achieved a limit of detection of about 1 pM or 50 amol/measurement, well within the reported useful range for diagnostic applications. We suggest that this technology could be a promising substitute of traditional lab-based techniques for the detection and quantification of miRNAs after these are extracted from diagnostic specimens and their analysis is thus made possible.

Magnetoresistive sensors for measurements of DNA hybridization kinetics \u2013 effect of TINA modifications

We present the use of magnetoresistive sensors integrated in a microfluidic system for real-time studies of the hybridization kinetics of DNA labeled with magnetic nanoparticles to an array of surface-tethered probes. The nanoparticles were magnetized by the magnetic field from the sensor current. A local negative reference ensured that only the specific binding signal was measured. Analysis of the real-time hybridization using a two-compartment model yielded both the association and dissociation constants kon, and koff. The effect of probe modifications with ortho-Twisted Intercalating Nucleic Acid (TINA) was studied. Such modifications have been demonstrated to increase the melting temperature of DNA hybrids in solution and are also relevant for surface-based DNA sensing. Kinetic data for DNA probes with no TINA modification or with TINA modifications at the 5′ end (1 × TINA) or at both the 5′ and 3′ ends (2 × TINA) were compared. TINA modifications were found to provide a relative decrease of koff by a factor of 6-20 at temperatures from 57.5 °C to 60 °C. The values of kon were generally in the range between 0.5-2 × 105 M−1s−1 and showed lower values for the unmodified probe than for the TINA modified probes. The observations correlated well with measured melting temperatures of the DNA hybrids.

The effects of multiple probes on the hybridization of target DNA on surfaces.

DNA microarrays have disruptive potential in many fields including genetics and medicine, but the technology has yet to find widespread clinical use due to poor reliability. Microarrays work on the principle of hybridization and can only be as dependable as this process is reliable. As such, a significant amount of theoretical research has been done to understand hybridization on surfaces on the molecular level. Previous simulations of a target strand with a single, surface-tethered probe molecule have yielded valuable insights, but such is an ideal system and little is known about the effects of multiple probes-a situation that more closely approximates the real system. This work uses molecular simulation to determine the specific differences in duplex stability between one, three, six, and nine tethered probes on a surface. The results show that it is more difficult for a single target to hybridize to a probe as the number of probes on the surface increases due to crowding effects; however, once hybridized, the duplex is more stable than when fewer probes are present. The data also indicate that hybridization of a target to a probe on the face of a group of probes is more stable than hybridization to probes at the edge or center locations. Taken as a whole, the results offer new insights into the cause of the poor reproducibility exhibited by microarrays.

DNA biosensor based on hybridization refractory mutation system approach for single mismatch detection

We report on a simple approach to enhance solid-phase hybridization-based single base mismatch discrimination at high ionic strength based on the deliberate insertion of a natural DNA base mismatch in the surface-tethered probe. A large drop in hybridization signal of single base mismatched alleles using the designed probe as compared with the conventional probe, from 80% to less than 25% of the signal obtained with the fully complementary, non-mutation-containing sequence, when using colorimetric detection was further improved to 20% when using electrochemical detection, attributable to a difference of spacing of immobilized probes. Finally, the designed probe was used for the electrochemical detection of the DQA1*05:05 allele amplified from real human blood samples.

Electrochemical genosensors for the detection of Bonamia parasite. Selection of single strand-DNA (ssDNA) probes by simulation of the secondary structure folding

A post-PCR nucleic acid work by comparing experimental data, from electrochemical genosensors, and bioinformatics data, derived from the simulation of the secondary structure folding and prediction of hybridisation reaction, was carried out in order to rationalize the selection of ssDNA probes for the detection of two Bonamia species, B. exitiosa and B. ostreae, parasites of Ostrea edulis.Six ssDNA probes (from 11 to 25 bases in length, 2 thiolated and 4 biotinylated) were selected within different regions of B. ostreae and B. exitiosa PCR amplicons (300 and 304 bases, respectively) with the aim to discriminate between these parasite species. ssDNA amplicons and probes were analyzed separately using the “Mfold Web Server” simulating the secondary structure folding behaviour. The hybridisation of amplicon–probe was predicted by means of “Dinamelt Web Server”. The results were evaluated considering the number of hydrogen bonds broken and formed in the simulated folding and hybridisation process, variance in gaps for each sequence and number of available bases. In the experimental part, thermally denatured PCR products were captured at the sensor interface via sandwich hybridisation with surface-tethered probes (thiolated probes) and biotinylated signalling probes. A convergence between analytical signals and simulated results was observed, indicating the possibility to use bioinformatic data for ssDNA probes selection to be incorporated in genosensors.

Disposable electrochemical DNA-array for PCR amplified detection of hazelnut allergens in foodstuffs

An electrochemical low-density DNA-array has been designed and implemented to be used in combination with polymerase chain reaction (PCR) in order to investigate the presence of hazelnut major allergens (Cor a 1.04, Cor a 1.03) in foodstuff. Unmodified PCR products were captured at the sensor interface via sandwich hybridization with surface-tethered probes and biotinylated signalling probes. The resulting biotinylated hybrids were coupled with a streptavidin–alkaline phosphatase conjugate and then exposed to a α-naphthyl phosphate solution. Differential pulse voltammetry was finally used to detect the α-naphthol signal. The detection limits for Cor a 1.03 and Cor a 1.04 were 0.3 and 0.1 nmol L −1, respectively (R.S.D. 10%). The optimized conditions were used to test several commercially available foodstuffs, claiming to contain or not the targeted nuts. The results were compared with those obtained with classical ELISA tests.

Switchable DNA interfaces for the highly sensitive detection of label-free DNA targets.

We report a method to detect label-free oligonucleotide targets. The conformation of surface-tethered probe nucleic acids is modulated by alternating electric fields, which cause the molecules to extend away from or fold onto the biased surface. Binding (hybridization) of targets to the single-stranded probes results in a pronounced enhancement of the layer-height modulation amplitude, monitored optically in real time. The method features an exceptional detection limit of <3 x 10(8) bound targets per cm(2) sensor area. Single base-pair mismatches in the sequences of DNA complements may readily be identified; moreover, binding kinetics and binding affinities can be determined with high accuracy. When driving the DNA to oscillate at frequencies in the kHz regime, distinct switching kinetics are revealed for single- and double-stranded DNA. Molecular dynamics are used to identify the binding state of molecules according to their characteristic kinetic fingerprints by using a chip-compatible detection format.

Disposable electrochemical genosensor for the simultaneous analysis of different bacterial food contaminants

This paper deals with the use of an electrochemical genosensor array for the rapid and simultaneous detection of different food-contaminating pathogenic bacteria. The method includes PCR amplification followed by analysis of the amplicons by hybridisation with toxin-specific oligonucleotide probes. A screen-printed array of four gold electrodes, modified using thiol-tethered oligonucleotide probes, was used. Unmodified PCR products were captured at the sensor interface via sandwich hybridisation with surface-tethered probes and biotinylated signaling probes. The resulting biotinylated hybrids were coupled with a streptavidin-alkaline phosphatase conjugate and then exposed to an alpha-naphthyl phosphate solution. Differential pulse voltammetry was finally used to detect the alpha-naphthol oxidation signal. Mixtures of DNA samples from different bacteria were detected at the nanomolar level without any cross-interference. The selectivity of the assay was also confirmed by the analysis of PCR products unrelated to the immobilised probes.

Steric Factors Controlling the Surface Hybridization of PCR Amplified Sequences

This study elucidated the hybridization behavior of surface-bound oligonucleotides to their longer PCR-amplified targets. The screen-printed gold surface of disposable electrodes was the platform onto which thiol-tethered oligonucleotides (21-mer) were immobilized by chemisorption. As a model case, approximately 600-bp amplicons were studied. Surface hybridization was monitored by means of an enzyme-linked assay with electrochemical detection. Use of different surface-tethered probe sequences over a wide range of surface densities was explored to achieve the highest duplex yield. Both the surface coverage by the probe and its relative position on the target strand were found to control the efficiency of capture of the target sequence. Interfacial hybridization occurred with the highest efficiency for a probe coverage of approximately 2.9 x 10(12) molecules/cm2 and when the 3' end of the amplicon was involved. An unusual (bell-shaped) response/amplicon concentration profile was additionally found. It was hypothesised that when the amount of solution-phase target is relatively high, random collisions make reannealing of the approximately 600-bp strands favored over formation of the surface-tethered probe-amplicon complex. This paper also describes a strategy to enhance the sensitivity of enzyme-linked hybridization assays. Such a strategy relies on formation, around the long target sequence, of dendritic-like structures, which could offer multiple anchoring points for the enzyme conjugate. The results shown in this work might have great significance for the practical application of hybridization to oligonucleotide chips.