Surface Plasmon Resonance Modes Research Articles

TiO2 multi-leg nanotubes for surface-enhanced Raman scattering

Abstract In the recent past, significant research efforts have been put forth to fabricate cost-effective substrates for surface-enhanced Raman scattering (SERS) applications. Here we propose semiconducting TiO2 multi-leg nanotubes and Au nanoparticle-coated TiO2 multi-leg nanotubes (TiO2 MLNTs and Au/TiO2 MLNTs) as SERS substrates. The unique multi-leg architecture of TiO2 nanotubes demonstrated enhanced light-harvesting properties facilitated by an induced photonic absorption edge. Remarkable high SERS sensitivity is observed towards the detection of Methylene blue (MB), up to nM concentration (E.F. ∼104) using TiO2 MLNTs. The same is attributed to the resonantly matched photonic absorption edge of TiO2 MLNTs with the wavelength of incident laser probe light. On the other hand, the Au nanoparticle coating further leveraged the light absorption ability of TiO2 MLNTs with the aid of localized surface plasmon resonance mode. As such, Au/TiO2 MLNTs showed excellent enhancement in SERS sensitivity (E.F. ∼105 , for nM of MB) facilitated by the synergy between the plasmonic modes of Au and the photonic absorption mode of TiO2 MLNTs. UV-Vis diffuse reflectance and Raman spectroscopy measurements are highlighted to elucidate the light absorption and SERS sensitivity of the TiO2 and Au/TiO2 MLNTs.

GOLD PLASMONIC ARRAY STRUCTURES FOR SENSING APPLICATIONS

This article is devoted to the theoretical study of the plasmonic properties of periodically arranged arrays of gold nanoparticles. The Comsol Multiphysics software, which is based on the finite element method, was used to build 3D numerical models for the simulation and conduct research. In this work the electric field distribution and optical characteristics of the spherical gold nanoparticles array were studied. Individual localized surface plasmon resonance modes are influenced when metallic nanoparticles are in the close proximity and as a result the electric near- fields can couple, resulting in a new hybrid mode. We mainly focused here on the investigation of two crucial questions, particularly, influences of the gap between the nanoparticles and the refractive index of the surrounding medium on the resulting optical response of the gold nanoparticles arrays. The array of periodically arragement gold nanoparticles is characterized by an enhanced local electric field between the nanoparticles, which is inversely proportional to the gap between the particles. The field strength and optical properties (reflection, transmission, and absorption) can be conveniently manipulated by changing the gap between particles. In additional, their potential applications as sensetive plasmonic sensors element have been considered. The studied structure has a significant potential for practical applications due to its wide range of the operating wavelengths and ease of the high-throughput fabrication. In the course of the study, it was established that the change in the distance between the surface of nanoparticles by 1 nm leads to a significant shift in the spectral transmission and reflection curves on the spectral range. In addition, these studies showed that an increase in the distance between the surfaces of nanoparticles leads to the decrease in the near-field interaction between gold nanoparticles in the array. Therefore, the obtained results can be successfully used in the manufacture of highly sensitive plasmon sensors with the possibility of controlling the sensitivity and the working spectral range.

The investigation of the interaction between fluorescent carbon dots labeling silk fibroin using a fluorescence microscope–surface plasmon resonance system

The use of fluorescent carbon dots (CDs) as highly precise biolabeling probes has been widespread in the fields of live cell imaging and protein labeling due to their small size and excellent photoluminescence ability to accurately target specific molecules with surface chemical properties. However, there was a lack of research on the interaction between CDs and labeled molecules. In this work, we presented a novel investigation strategy, the fluorescence microscopy-surface plasmon resonance (FM-SPR) system, which combined the use of fluorescence microscopy and wavelength modulation surface plasmon resonance to study the interaction between CDs and labeled molecules in real-time. Using this system, simultaneously recorded the SPR signals and the fluorescence images on the surface of the FM-SPR sensor chip. We observed the dynamic curve and fluorescence images of the interaction between green emissive nitrogen-doped carbon dots (N-CDs) and silk fibroin (SF) in real-time. The kinetic parameters, the quantitative analysis, and the investigation of the binding could be achieved. The results showed a strong linear relationship between the change in SPR signals and the concentration of N-CDs, with a linear coefficient of 0.99913. The linear detection range was 2.5 μg/mL–100 μg/mL, and the real lowest detection limit reached 0.5 μg/mL. Additionally, the green fluorescence points in the imaging region on the FM-SPR sensor chip increased with the concentration of N-CDs, which was consistent with the change in SPR signals. Using this system we also acquired the association rate and dissociation rate of N-CDs to SF which were 2.65 × 10−5/s and 1.52 × 10−5/s, respectively. This demonstrated the effectiveness of our method in quantitatively analyzing SF labeled with N-CDs.

High-performance portable grating-based surface plasmon resonance sensor using a tunable laser at normal incidence

Surface plasmon resonance (SPR) sensors are among the most sensitive sensors. In such devices, a grating is a compelling alternative to a prism for the excitation of a surface plasmon, especially in the development of sensors for point-of-care applications due to their compactness and cost-effectiveness. Here, we demonstrate the use of a tunable laser in a grating-based SPR system for further miniaturization and integration. The tunable laser working at normal incidence replaces spectral and moving components, while also simplifying the optical setup. Normal incidence is conventionally avoided due to the complexity of the control of degenerated SPR modes. We investigate, both computationally and experimentally, the splitting of the SPR modes at small nonzero incidences, which is lacking in previously reported studies. By optimizing the grating configuration, we were able to diminish the SPR mode splitting phenomenon when the excitation was feasible with the normal incidence configuration. The fabricated sensor showed a high sensitivity of 1101.6 nm/RIU. Notably, the figure of merit of the sensor, defined as the ratio between the sensitivity and bandwidth of the SPR dip, was 229.5. The experimental results were consistent with the simulation results. We also demonstrate its capability for detecting low concentrations of glucose and creatinine with the limit of detection of 14.2 and 19.1 mmol/L, respectively.

Enhanced circular dichroism of an X-shaped nanostructure by asymmetric surface plasmon interference

A plasmonic chiral structure, which is a nanostructure composed of noble metals that lacks planar symmetry, demonstrates significant potential for various applications in bio-sensing, optical forces, switching and controlling the photoluminescence, and detecting chiral light. Understanding its fundamental property of circular dichroism (CD) is critical for these applications. Although the surface plasmon resonance (SPR) mode at a specific moment can explain the CD properties of chiral structures, to gain a better understanding of chirality, the mode shape of the SPR on a nanostructure must be analyzed throughout an entire period. Our study proposes an X-shaped nanostructure to investigate the temporal evolution of plasmon resonance in chiral structures. The simulation results demonstrated that our structure exhibited a significant temporal evolution in plasmonic oscillations, providing new insights into the nature of chirality. In addition, we provided a comprehensive theoretical explanation of CD using the Born–Kuhn model. Furthermore, we discovered that the CD in the X-shaped structure was intensified by the asymmetric interference between the structure and underlying gold film substrate.

Manipulation of plasmon dephasing time via the coupling between localized surface plasmon resonance and waveguide modes

Manipulation of plasmon dephasing time of the hybrid modes has gained much attention in recent years, which plays critical roles in many important applications of plasmonics. Here, we manipulate the dephasing time of plasmonic field resulting from coupling of the localized surface plasmon (LSP) of the nanosphere array and the waveguide mode supported by the indium tin oxide film with quasi-normal mode-assisted harmonic oscillator model method. It results in the formation of two distinct modes, transverse electric (TE) and transverse magnetic (TM) modes. Such coupling can significantly modify the dynamics of the original plasmonic modes. The dephasing time of the hybrid plasmon modes, encompassing both TE and TM modes, can be extended from 1.25fs to 4.95fs, which is about 2–7 times compared to that of a single localized surface plasmon resonant mode. More importantly, by changing the structural parameters, we can flexibly manipulate either the dephasing time with a fixed wavelength or the resonant wavelength with a fixed dephasing time.

Green synthesis of Ag/Yb2O3 nanostructures based-MIP for tamoxifen detection: Advancing from refractometers to sensor

This study presents a novel optical fiber refractometer based on a single smart functional layer of Ag/Yb2O3 nanostructure, synthesized by a green chemistry method using oak fruit extract. The optical phenomena of surface plasmon resonance (SPR) and lossy mode resonance (LMR) were investigated based on the performance of the real and imaginary parts of the dielectric constant function of nanoparticles and nanostructures coated on the optical fiber. The Ag/Yb2O3 nanostructure enhances the LMR phenomenon and acts as an electron mediator for the detection of tamoxifen (TAM) drug, a widely used anticancer agent. The Ag/Yb2O3 nanostructure was coated on a curved optical fiber surface along with a molecularly imprinted polymer (MIP) layer, which provided selective recognition of TAM molecules. The sensor probe showed rapid and reversible adsorption/desorption of TAM, with a high sensitivity of 5.3611 nm/µM and a limit of detection (LOD) and limit of quantification (LOQ) of 0.0987 μM and 0.32902 μM, respectively. The sensor also exhibited good recovery rate and effectiveness in real samples, demonstrating its potential for sensivity applications.

High-sensitivity refractive index sensor based on strong localized surface plasmon resonance.

This study proposes two types of composite structures based on gold nano circular and nano square rings on a gold thin film for plasmonic refractive index sensing. The finite-difference time-domain method was used for simulation and analysis. The nano square ring composite structure showed superior performance, with five surface plasmon resonance modes, and a peak sensitivity and figure of merit in a liquid environment of 1600nm/RIU and 86R I U -1, respectively. The sensing performances of localized surface plasmon resonance modes of both structures are superior to those of the propagating surface plasmon resonance modes. The proposed composite structures can provide a reference for refractive index sensing and have broad application prospects in bio-chemistry.

Electrically tunable and switchable perfect infrared absorber based on ENZ material

In this paper, a dynamically tunable and switchable perfect infrared absorber is put forward, which is composed of a gold ring array, an indium tin oxide (ITO) layer, an alumina (Al2O3) spacer and a continuous Au film from top to bottom. Epsilon-near-zero (ENZ) mode in ITO layer is excited by localized surface plasmon resonance (LSPR) mode of the gold ring. With the increase of the biasing voltage V, the carrier concentration of ITO material decreases, and the absorption peak caused by ENZ resonance blue shifts obviously. Notice that our infrared absorber can realize bidirectional switching of “ON” and “OFF” states at 1210 nm, with modulation depth of 70 % and switching contrast (SC) of 241 %, manifesting its excellent electrical regulation performance. After verification, the switching performance of our absorption structure has a high precision tolerate of the manufacturing process. A clear Fano type absorption curve appears in the wavelength range 1000 nm–1300 nm, under the biasing voltage V of 3.4 V. Moreover, a series of small absorption peaks are produced by Fabry-Pérot (F–P) resonance in the horizontal plane caused by the standing wave in the ENZ layer, and this phenomenon is unexpected. We propose a theoretical interpretation for the absorption mechanism in both cases based on multiple interference model. It is also proved that the proposed infrared absorber is polarization insensitive and exhibits high absorptance (>90 %) over an incident range of 0 deg–60 deg. The electrically tunable absorption switch function makes our absorber have potential in selective thermal emitters, infrared sensors, infrared stealth, beam focusing and other fields.

Enhanced optical sensing with metal-insulator-metal nanohole arrays integrated with silver nanoparticles

The field of plasmonic sensing has witnessed rapid advancements in recent years. This work proposes an innovative methodology that employs metal–insulator-metal (MIM) nanohole arrays integrated with ring-shaped silver nanoparticles (AgNPs) to serve as an effective plasmonic refractive index sensor. The hybrid substrates are prepared using a combination of nanosphere lithography (NSL), reactive ion etching, and an enhanced plasmonic site-selective photocatalytic reaction, ensuring large-area fabrication, high throughput, and cost-effectiveness. The resonance peaks observed in the visible-NIR spectra are attributed to the coupling of surface plasmon resonance modes between MIM structures and AgNPs. The resonance wavelength exhibits sensitively to changes in the surrounding medium within the refractive index range of 1 to 1.5, with a remarkable sensitivity of 835 nm/RIU. Our findings reveal the significant potential of this technology for advancing optical sensing applications.

Epsilon-near-zero material-based bi-layer metamaterials for selective mid-infrared radiation

Selective mid-infrared (MIR) radiation is highly desirable in many applications. However, there are still great challenges to simultaneously achieve MIR camouflage and radiative cooling utilizing simple structure. This work theoretically and experimentally proposes a bi-layer metamaterial composed of aluminum doped zinc oxide (AZO) nanoparticles embedded in Al2O3 matrix on the aluminum film. The bi-layer metamaterial exhibits high performance in MIR camouflage with radiative cooling, a low emissivity ( = 0.11, = 0.20) in atmospheric windows and a high emissivity ( = 0.81) in non-atmospheric windows. The interaction of the epsilon-near-zero (ENZ) mode and localized surface plasmon resonance (LSPR) mode is responsible for the perfect emission over the wavelength range of 5–8 m. Additionally, the proposed selective MIR emitter supports large-angle incidence and has great polarization insensitivity. This demonstrates that epsilon-near-zero material-based bi-layer metamaterial is highly promising for the development of selective mid-infrared radiation.

Metasurface Absorbers with Film-Coupled Au Nanoclusters to Achieve Broadband and Polarization-Independent Absorption of UV-Vis Light.

Metasurface absorbers (MAs) have attracted widespread interest in the recent study of subwavelength artificial optical metasurfaces, although most reported MAs suffer from the actualities of costly and time-consuming fabrications, narrow working bandwidth, polarization-dependent responses, etc., somewhat limiting their practical applications. Herein, we introduce a facile and low-cost method to fabricate MAs with excellent absorption performances via the self-assembly of synthesized Au nanoclusters (NCs) on a Au film spaced by a nanoscale-thick dielectric SiO2. Interestingly, the proposed MAs with well-designed Au film-coupled Au NCs (i.e., an appropriate surface coverage of Au NCs and the compatible thickness of the SiO2 spacer) exhibited a measured average absorbance above 90% within a broad UV-vis wavelength band (200-800 nm). In addition, owing to the MAs' topological symmetry, their UV-vis absorption behaviors presented polarization insensitivity with the incident light angles ranging from 20 to 50°. It has been demonstrated that the excited different surface plasmon resonance modes between Au NCs and the adjacent Au film were vital; in addition, the light-trapping effects from "V"-shaped structures of Au NCs were favorable for the designed MAs with enhanced light absorption. We believe that such MAs and the potential self-assembly fabrication strategy may facilitate scalable optical applications such as photothermalvoltaics, ultraviolet protection, optical storage, and sensing.

Perfect Solar Absorber Based on Four-Step Stacked Metamaterial

Solar absorbers are of great significance in the development of new energy technologies. However, the current approaches are mostly complex and fail to achieve high absorption rates across a wide range of wavelengths. Here, we propose a four-step stacked metamaterial solar absorber that achieves near-perfect absorption. Our four-step stacked absorber (FSSA) boasts an average absorption rate of 96.32% from 499 nm to 2348.3 nm, and a high average absorption rate of 94.96% from 300 nm to 2500 nm. Electromagnetic mode analysis and the impedance matching theory were employed to analyze the designed FSSA, which revealed that the high absorption rates are due to the propagating surface plasmon resonance (PSPR) and localized surface plasmon resonance (LSPR) modes. The FSSA offers broadband, high absorption rates, and high spectrum selectivity. Additionally, the structural parameters are adjusted to optimize the proposed perfect solar absorber. This proposed absorber can have promising applications in the renewable energy industry.

Synergistic Enhancement Mechanism of High Electron Density and Localized Surface Plasmons for Strong Light‐Matter Interactions

Abstract2D layered semiconductor materials hold the potential to address the crucial technical challenges of poor signal uniformity and low repeatability of traditional metal plasmonic nanostructures in sensing, which hinder quantitative detection and analysis in molecular detection. However, the ultra‐low light absorption efficiency and electronic state density intrinsically result in their inferior sensitivity compared with those of conventional metal plasmonic nanostructures. Therefore, the integration of the classical back‐gate modulation strategy and surface plasmon resonance into 2D heterostructures is proposed. This integration aims to control the interaction between the surface sensing material of the heterostructure and target molecules from the perspective of surface electronic state density and optical absorption efficiency. The sensitivity (≈10−12 m) of as‐designed MoS2/graphene/Ag heterojunction is comparable to that of advanced metal plasmonic nanostructures, and the corresponding enhancement factor (EF, 1.71 × 104) is much higher than that of most heterojunction‐based and metal‐semiconductor coupled devices. This study uncovers the internal mechanism of the surface plasmon effect and high electronic state density in enhancing light‐matter interactions, and provides an alternative avenue for high‐performance surface‐enhanced devices.

Magnetic Field Sensor Based on Magnetic Optical Surface Plasmon Resonance

Surface plasmon resonance with high sensitivity is widely used in molecular dynamics detection. Herein, a magneto‐optic surface plasmon resonance (MOSPR) sensor based on Au/Co/Au thin film for detecting magnetic fields is developed. The strong coupling between the magneto‐optical waveguide mode and the surface plasmon resonance mode is analyzed and the linear relationship between the reflectivity of the MOSPR sensor and the magnetic field is established. The response, response–recovery time, and dispersion relationship for different magnetic fields are also numerically simulated. Additionally, experimental data on the MOSPR sensor's response to magnetic fields at room temperature (25 °C) are obtained. During the experiment, a differential signal in the light path is applied to reduce the noise generated by the environment. The results demonstrate that the MOSPR sensor exhibits high response, ultrafast response time, and long‐term stability. The study provides a promising approach for detecting magnetic fields with high sensitivity and accuracy.

Design of an agile optical switcher based on a 1D silver plasmonic nanograting filled with a nonlinear Kerr material

In this paper, we investigate the nonlinear optical response characteristics of a metallic nanograting with nonlinear Kerr media within its slits using the finite element method. The proposed nanograting system is illuminated by a nanosecond Gaussian pulse laser under normal incidence and the electric filed pointing across the slits. The results show a perfect linear absorption at resonance wavelength thanks to the coupling of the surface plasmon resonance (SPR) mode and photon cavity mode. We simulate the transient nonlinear absorption variation of the system when the pulse laser is set up at either resonance or off-resonance wavelengths. The results indicate that the unit linear absorption drastically decreases by increasing the laser fluence around the center of the pulse. Interestingly, one can also enhance the weak linear off-resonance absorption to the value of unit by increasing the pulse laser fluence. The higher the laser fluence, the higher the maximum absorption contrast between linear and nonlinear regimes occurs owing to the nonlinear Kerr effect. Indeed, when the laser fluence reaches a critical value, it can excite the Kerr nonlinearity, which changes the coupling strength of SPR mode and the photon cavity mode leading to the absorption adjustment in the nanograting. These properties indicate the possibility of utilizing the proposed nanograting in dual functional absorber and nonabsorber systems, which make it an appropriate candidate for agile optical switching devices.

Sensitivity-Tunable Terahertz Liquid/Gas Biosensor Based on Surface Plasmon Resonance with Dirac Semimetal

In this paper, we study the sensitivity-tunable terahertz (THz) liquid/gas biosensor in a coupling prism–three-dimensional Dirac semimetal (3D DSM) multilayer structure. The high sensitivity of the biosensor originates from the sharp reflected peak caused by surface plasmon resonance (SPR) mode. This structure achieves the tunability of sensitivity due to the fact that the reflectance could be modulated by the Fermi energy of 3D DSM. Besides, it is found that the sensitivity curve depends heavily on the structural parameters of 3D DSM. After parameter optimization, we obtained sensitivity over 100°/RIU for liquid biosensor. We believe this simple structure provides a reference idea for realizing high sensitivity and a tunable biosensor device.

Highly sensitive SPR curvature sensor based on graded-index fiber.

At present, fiber curvature sensors based on surface plasmon resonance (SPR) are mostly of the multimode fiber core type or cladding type. These types have many SPR modes, resulting that the sensitivity cannot be adjusted and is difficult to improve. In this Letter, a highly sensitive SPR curvature sensor based on graded-index fiber is proposed. The light-injecting fiber is eccentrically connected with the graded-index fiber to inject single-mode light. Due to the self-focusing effect, the light beam propagates in the graded-index multimode fiber with a cosine trajectory, and the cosine beam contacts the flat grooved sensing region fabricated on the graded-index fiber to generate SPR. Due to the single transmission mode of the proposed fiber SPR sensor, the curvature sensing sensitivity is greatly improved. By changing the light injection position of the graded-index multimode fiber, the sensitivity can be adjusted. The proposed curvature sensing probe has a high sensitivity and can identify the bending direction. When bending in the X direction, the sensitivity reaches 5.62 nm/m-1, and when bending in the - X direction, the sensitivity reaches 4.75 nm/m-1, which provides a new scheme for highly sensitive and directionally identifiable curvature measurement.

Study on the Transmission and the Field Enhancement of Bi-Rhombic Aperture Arrays Structure

This paper presents a new bi-rhombic aperture arrays structure (BAAs) that exhibits high transmission and extraordinary field enhancement. Through numerical simulation and theoretical analysis, the surface plasmon resonance mode and a quasi-FP resonance mode within the structure are approved to enhance the optical transmittance effectively. The transmission spectrum and the charge distribution of the resonance mode shows that the gap size and the bi-rhombic aperture short axis have a significant effect on shiftting of the spectrum without damping the transmission peak of the wave, enabling the achievement of both high transmission and high field enhancement. The optimized structure achieved a transmittance of 85% and a maximum enhancement factor of 18000. Besides that, an ultra-wide spectrum transmission in the near to mid-infrared was attained by adjusting the aperture structure. At wavelengths larger than mid-infrared, the transmittance can avoid damping, and the adjusted device is primarily sensitive to the lattice constant in one- direction. These results suggest that the proposed BAAs has significant potential for various applications in nanophononics, infrared sensing, and biomedical imaging.

Enhanced upconversion luminescence using long-range surface plasmon resonance mode with prism coupler

In the study, we present the significant enhancement of the upconversion luminescence by taking advantage of long-range surface plasmon resonance mode. Compared with the reflection enhanced upconversion luminescence of Ag film, the intensity of upconversion luminescence enhanced by long-range surface plasmon resonance mode is improved 100 times. Additionally, the finite-difference time-domain simulation indicates that the incident light energy can concentrate in the upconversion nanoparticles doped dielectric layer at the long-range surface plasmon resonance mode, which the maximum electric field enhancement factor |E|2/|E0|2 can reach to 58. The experimental result shows that the upconversion luminescence enhancement is related to the thickness of doped Polymethylmethacrylate (PMMA) layer. Furthermore, due to the excited upconversion luminescence having high directionality, it is shown that the strong upconversion luminescence could be received at the specific angle.