Stent Surface Research Articles

In vitro and in vivo study of antibacterial and anti-encrustation coating on ureteric stents.

To investigate the ability of propolis-coated ureteric stents to solve complications, especially urinary tract infections (UTIs) and crusting, in patients with long-term indwelling ureteric stents through antimicrobial and anti-calculus activities. Polyurethane (PU) ureteric stents were immersed in the ethanol extract of propolis (EEP), a well-known antimicrobial honeybee product, and subjected to chemical, hydrophilic, and seismic tests. The antimicrobial activity of the EEP coating was then examined by in vitro investigation. Proteus mirabilis infection was induced in rats within uncoated and EEP-coated groups, and the infection, stone formation, and inflammation were monitored at various time points. The characterisation results showed that the hydrophilicity and stability of the EEP surface improved. In vitro tests revealed that the EEP coating was biocompatible, could eliminate >90% of bacteria biofilms attached to the stent and could maintain bacteriostatic properties for up to 3 months. The in vivo experiment revealed that the EEP-coating significantly reduced the amount of bacteria, stones, and salt deposits on the surface of the ureteric stents and decreased inflammation in the host tissue. Compared with clinically used PU stents, EEP-coated ureteric stents could better mitigate infections and prevent encrustation. Thus, this study demonstrated that propolis is a promising natural dressing material for ureteric stents.

Polyvinylpyrrolidone hydrogel coating for ureteral stent: Safety and performance evaluation.

Ureteral stents are commonly used in urology. However, complications such as encrustation and infection on the surface of the stent, and injury to the ureteral mucosa can occur after implantation, causing discomfort for patients. We intend to confirm the biosafety of polyvinylpyrrolidone (PVP) hydrophilic coating and its lubrication properties for surface modification of ureteral stents to reduce friction and improve patient comfort. Based on our previous studies, we have developed a PVP hydrophilic coating for surface modification of ureteral stents. We firstly investigated the cytotoxicity, intradermal irritation, delayed type hypersensitivity, and acute systemic reactions of stent coating extracts. We further characterized the break strength, retention strength, and dynamic friction of the stent. The cell survival rate of all experimental groups was greater than 70%. No hypersensitivity reaction, systemic toxicity reaction, or obvious intradermal reaction were observed. The above results indicate that the test results of the modified stent meet the requirements of ISO 10993-5: 2009 (Cytotoxicity); ISO 10993-10:2021 (Sensitization and Irritation); ISO 10993-11:2017 (Acute Systemic Toxicity). After soaking in artificial urine for an extended period, there was no obvious change in its super-slip performance. Our results confirm the safety and lubrication characteristics of PVP hydrophilic coating for ureteral stent surface modification. The performance of this coating has the potential to reduce complications after stent implantation, thereby improving patient comfort, reducing medical burden, and has a good clinical application prospect.

Endothelialization of PTFE-covered stents for aneurysms and arteriovenous fistulas created in canine carotid arteries

To investigate the endothelialization of covered and bare stents deployed in the canine carotid arteries and subclavian arteries for treating experimental aneurysms and arteriovenous fistulas, twenty aneurysms were created in 10 dogs, and 20 fistulas in another 10 dogs. The Willis balloon-expandable covered stent and a self-expandable covered stent were used to treat these lesions, and a self-expandable bare stent was deployed in the subclavian artery for comparison. Followed up for up to 12 months, the gross observation, pathological staining, and scanning electronic microscopic data were analyzed. Two weeks after creation of animal model, thirty self-expandable covered stents and ten balloon-expandable covered stents were deployed. Fifteen bare stents were deployed within the left subclavian arteries. Twenty days after stenting, the aneurysm significantly shrank. At 6 months, the thrombi within the aneurysm cavity were organized. Three to 12 months later, most covered and bare stents were covered by a thin transparent or white layer of endothelial intima. Layers of intima or pseudomembrane were formed on the stent 20–40 days after stent deployment. Over three months, the pseudomembrane became organized, thinner, and merged into the vascular wall. Under scanning electronic microscopy, the surface of covered and bare stents had only deposition of collagen fibers and rare endothelial cells 20–40 days after stenting. From three to ten months, the endothelial cells on the internal surface of stent became mature, with spindle, stripe-like or quasi round morphology along the blood flow direction. Over time, the endothelial cells became mature. In conclusion, three months after deployment in canines’ arteries, the self-expandable bare and covered stents have mostly been covered by endothelial cells which become maturer over time, whereas the balloon-expandable covered stents do not have complete coverage of endothelial cells at three months, especially for protruding stent struts and areas. Over time, the endothelialization will become mature.

Vascular stent with immobilized anti-inflammatory chemerin 15 peptides mitigates neointimal hyperplasia and accelerates vascular healing

Endovascular stenting is a safer alternative to open surgery for use in treating cerebral arterial stenosis and significantly reduces the recurrence of ischemic stroke, but the widely used bare-metal stents (BMSs) often result in in-stent restenosis (ISR). Although evidence suggests that drug-eluting stents are superior to BMSs in the short term, their long-term performances remain unknown. Herein, we propose a potential vascular stent modified by immobilizing clickable chemerin 15 (C15) peptides on the stent surface to suppress coagulation and restenosis. Various characterization techniques and an animal model were used to evaluate the surface properties of the modified stents and their effects on endothelial injury, platelet adhesion, and inflammation. The C15-immobilized stent could prevent restenosis by minimizing endothelial injury, promoting physiological healing, restraining the platelet-leukocyte-related inflammatory response, and inhibiting vascular smooth muscle cell proliferation and migration. Furthermore, in vivo studies demonstrated that the C15-immobilized stent mitigated inflammation, suppressed neointimal hyperplasia, and accelerated endothelial restoration. The use of surface-modified, anti-inflammatory, endothelium-friendly stents may be of benefit to patients with arterial stenosis. Statement of significanceEndovascular stenting is increasingly used for cerebral arterial stenosis treatment, aiming to prevent and treat ischemic stroke. But an important accompanying complication is in-stent restenosis (ISR). Persistent inflammation has been established as a hallmark of ISR and anti-inflammation strategies in stent modification proved effective. Chemerin 15, an inflammatory resolution mediator with 15-aa peptide, was active at picomolar through cell surface receptor, no need to permeate cell membrane and involved in resolution of inflammation by inhibiting inflammatory cells adhesion, modulating macrophage polarization into protective phenotype, and reducing inflammatory factors release. The implications of this study are that C15 immobilized stent favors inflammation resolution and rapid re-endothelialization, and exhibits an inhibitory role of restenosis. As such, it helps the decreased incidence of ISR.

A comparison of endothelial cell growth on commercial coronary stents with and without laser surface texturing

Complete endothelialisation of coronary stents is an important determinant of future thrombotic complications following coronary stenting. Stent surface texture is an important factor that influences endothelial cell growth. With the emergence of second and third generation coronary stents, is limited comparative data describing endothelial cell growth in contemporary stent platforms, and limited data available on approaches used to rapidly modify the surfaces of commercial coronary stents to improve endothelialisation. In this study we have determined the in vitro proliferation of the primary human coronary artery endothelial cells on the commonly used 4 types of commercial coronary stents and found that the inner surface of BioMatrix drug-eluting stents (DES), after eliminating of the polymer and drug coating, had significantly higher endothelial cell proliferation compared to that of other bare metal stents (BMS): Multi-Link8, Integrity and Omega. The surfaces of the 3 types of BMS which are smooth, displayed similar endothelial cell proliferation, suggesting the importance of surface features in manipulating endothelial cell growth. Laser surface texturing was used to create micro/nano patterns on the stents. The laser treatment has significantly increased endothelial proliferation on the inner surfaces of all 4 types of stents, and Multi-Link8 stents displayed the highest (>100%) improvement. The laser textured BioMatrix stents had the highest absolute number of endothelial cells growth. Our results provided useful information in the endothelialisation potential for the commonly used commercial coronary stents and suggested a potential future application of laser surface bioengineering to coronary stents for better biocompatibility of the device.

Pilot study on cultural and metagenomic analysis of bile and biliary stentslead to unveiling the key players in stent occlusion

Endoscopic Retrograde Cholangio-Pancreatography (ERCP) with biliary stenting is a minimally invasive medical procedure employed to address both malignant and benign obstructions within the biliary tract. Benign biliary strictures (BBSs), typically arising from surgical interventions such as liver transplants and cholecystectomy, as well as chronic inflammatory conditions, present a common clinical challenge. The current gold standard for treating BBSs involves the periodic insertion of plastic stents at intervals of 3–4 months, spanning a course of approximately one year. Unfortunately, stent occlusion emerges as a prevalent issue within this treatment paradigm, leading to the recurrence of symptoms and necessitating repeated ERCPs. In response to this clinical concern, we initiated a pilot study, delving into the microbial composition present in bile and on the inner surfaces of plastic stents. This investigation encompassed 22 patients afflicted by BBSs who had previously undergone ERCP with plastic stent placement. Our preliminary findings offered promising insights into the microbial culprits behind stent occlusion, with Enterobacter and Lactobacillus spp. standing out as prominent bacterial species known for their biofilm-forming tendencies on stent surfaces. These revelations hold promise for potential interventions, including targeted antimicrobial therapies aimed at curtailing bacterial growth on stents and the development of advanced stent materials boasting anti-biofilm properties.

The interplay between bacterial biofilms, encrustation, and wall shear stress in ureteral stents: a review across scales

Ureteral stents are hollow tubes that are inserted into the ureter to maintain the flow of urine from the kidney to the bladder. However, the use of these indwelling stents is associated with potential complications. Biofilm, an organized consortium of bacterial species embedded within a self-producing extracellular matrix, can attach to the outer and inner surfaces of ureteral stents. Furthermore, encrustation - defined as the buildup of mineral deposits on the stent surface - can occur independently or in parallel with biofilm formation. Both phenomena can cause stent obstruction, which can lead to obstructive pyelonephritis and make stent removal difficult. Understanding the influence of flow on the development of biofilm and encrustation and the impact of small mechanical environmental changes (e.g., wall shear stress distribution) is key to improve the long-term performance of stents. Identifying the optimal stent properties to prevent early bacterial attachment and/or crystal deposition and their growth, would represent a breakthrough in reducing biofilm-/encrustation-associated complications. This review identifies the most prevalent bacterial strains and crystal types associated with ureteral stents, and the process of their association with the stent surface, which often depends on patient comorbidities, stent material, and indwelling time. Furthermore, we focus on the often-overlooked role of fluid dynamics on biofilm and encrustation development in ureteral stents, across a range of physical scales (i.e., from micro- to macro-scale) with the aim of providing a knowledge base to inform the development of safer and more effective ureteral stents.

A Study on the Efficacy and Safety of Pipeline Shield Stents and Nonmodified Surface Flow-Diverting Stents in Patients with Intracranial Aneurysms

IntroductionFew studies have compared the Pipeline Shield stents with previous generations of flow-diverting stents (FDs) for treating unruptured intracranial aneurysms (UIA). This study aimed to evaluate the efficacy and safety of Pipeline Shield stents and FDs without modified surfaces. Materials and MethodsThe present evaluation is a retrospective cohort study of patients endovascularly treated with Pipeline Shield stents or flow-diverting (FD) stents without modified surfaces for UIA between January 2014 and June 2022. The data analyzed was obtained from the anonymized database of the institution's Interventional Radiology service. Results147 patients with 155 UIA were included. 96 of them were treated with Pipeline Shield stents and 59 with FDs without modified surfaces. The aneurysms treated with Pipeline Shield stents had higher six-month (OKM D; 87.5 % vs. 71.4 %, p-value: 0.025) and one-year (OKM D; 82.5 % vs. 63.0 %, p-value: 0.047) occlusion rates than aneurysms treated using FDs without modified surfaces. No differences between the devices were found at the one-year follow-up in ischemic stroke (p-value: 0.939) and hemorrhagic complications (p-value: 0.559). ConclusionPipeline Shield stents demonstrated superior complete occlusion rates (OKM D) at both the six-month and one-year follow-up assessments when compared to non-modified surface FDs. There were no significant differences in the safety profiles between the two types of stents with regard to thromboembolic complications and ischemic events. Further research with larger study populations is necessary to validate these findings.

A Versatile Passivated Protein‐Adsorption Platform for Rapid Healing of Vascular Stents by Modulating the Microenvironment

AbstractBiodegradable stents have paved the way to treat coronary artery disease. However, rapid reendothelialization is required to solve the problems of mismatched degradation rates, localized inflammation, and insufficient biocompatibility. Herein, a novel passivated protein‐adsorption coating is synthesized by coordination chelation, oxidation, cross‐linking, polymerization, and deposition of dopamine, (‐)‐epigallocatechin gallate (EGCG), and copper ions (Cu2+) using two‐electron oxidation. This coating exhibits hierarchical functionality, that is, at the macroscale, its superhydrophilicity conveys antifouling ability; whereas at the microscale, the active groups (quinone‐, amino‐, hydroxyphenyl groups and aromatic ring) facilitate protein adsorption. Antifouling ability prevents acute thrombosis and inflammation and maintains initial microenvironment stability post‐implantation. The active groups facilitate gradual endothelial cells (ECs) adhesion. Meanwhile, the decomposition of nitric oxide (NO) donors to release NO is catalyzed by Cu2+, and EGCG alleviates or prevents oxidative stress damage, inflammatory responses, thrombosis formation, and excessive smooth muscle cells proliferation in the stent microenvironment. This provides favorable conditions for the rapid and healthy growth of ECs. This study proposes a novel strategy for rapid neointima formation comprising healthy ECs on the surfaces of biodegradable stents by depositing a passivated protein‐adsorption coating (polydopamine/EGCG/Cu), opening new possibilities for the efficient treatment of coronary artery disease.

Histological Features of In-Stent Restenosis after Iliac Vein Thrombus Removal and Stent Placement in a Goat Model

PurposeTo establish an animal model for in-stent restenosis (ISR) after postthrombotic iliac vein stent placement and characterize histopathological changes in tissue within the stented vein. Materials and MethodsIliac vein thrombosis was induced using balloon occlusion and thrombin injection in 8 male Boer goats. Mechanical thrombectomy and iliac vein stent placement were performed 3 days after thrombosis induction. Restenosis was evaluated by venography and optical coherence tomography (OCT) at 1 and 8 weeks after stent placement, and stent specimens were taken for pathological examination after the animals were euthanized. ResultsThrombosis induction was successful in all 8 goats, with >80% iliac vein occlusion. After thrombus removal, OCT revealed considerable venous intimal thickening and a small number of mural thrombi. Neointimal hyperplasia with thrombus formation was observed in all goats 1 week after stent implantation; the degree of ISR was 15%–33%. At 8 weeks, the degree of ISR was 21%–32% in 3 goats, and stent occlusion was observed in 1 goat. At 1 week, the neointima predominantly consisted of fresh thrombi. At 8 weeks, proliferplastic fibrotic tissue and smooth muscle cells (SMCs) were predominant, and the stent surfaces were endothelialized in 2 of 3 goats and partially endothelialized in 1 goat. ConclusionsIn the goat model, postthrombotic neointimal hyperplasia in the venous stent may result from time-dependent thrombus formation and organization, accompanied by migration and proliferation of SMCs, causing ISR. These results provide a basis to further explore the mechanism of venous ISR and promote the development of venous stents that reduce neointimal hyperplasia.

Construction and biocompatibility evaluation of MOF/S-HA composite coating on the surface of magnesium alloy vascular stent

In recent years, functional molecules such as metal-organic frameworks (MOFs), hyaluronic acid (HA) and heparin have been widely studied in the field of surface modification of cardiovascular and cerebrovascular implant materials. However, magnesium (Mg) alloy scaffolds, which are used as implanted materials, have difficulties such as poor cell compatibility, insufficient endothelialization, and remodeling of the blood–brain barrier. In this study, MOF-Cu formed after chelating organic ligand catechol (HPT) and Cu(II) was coated by Sulfonated hyaluronic acid (S-HA) on the surface of ZE21B Mg alloy to form a composite coating, which not only inherited the excellent anticoagulant and anti-inflammatory properties of S-HA, but also significantly improved the bio-compatibility of the coating by reasonably regulating the concentration of Nitric oxide (NO) catalytic release, promoted the proliferation, migration and expression of specific factors in endothelial cells (ECs), regulated the transformation of smooth muscle cells (SMCs) to contractile phenotypes. And it has important and remarkable performance in promoting the transformation of macrophage (MA) into anti-inflammatory M2 phenotype. These results provide important research strategies for Mg alloy vascular stents materials in remodeling blood–brain barrier, relaxing cerebrovascular vessels, inhibiting inflammatory responses, and maintaining cardiovascular and cerebrovascular elasticity.

Hypercholesterolemia exacerbates in-stent restenosis in rabbits: Studies of the mitigating effect of stent surface modification with a CD47-derived peptide

Background and aimsHypercholesterolemia (HC) has previously been shown to augment the restenotic response in animal models and humans. However, the mechanistic aspects of in-stent restenosis (ISR) on a hypercholesterolemic background, including potential augmentation of systemic and local inflammation precipitated by HC, are not completely understood. CD47 is a transmembrane protein known to abort crucial inflammatory pathways. Our studies have examined the interrelation between HC, inflammation, and ISR and investigated the therapeutic potential of stents coated with a CD47-derived peptide (pepCD47) in the hypercholesterolemic rabbit model. MethodsPepCD47 was immobilized on metal foils and stents using polybisphosphonate coordination chemistry and pyridyldithio/thiol conjugation. Cytokine expression in buffy coat-derived cells cultured over bare metal (BM) and pepCD47-derivatized foils demonstrated an M2/M1 macrophage shift with pepCD47 coating. HC and normocholesterolemic (NC) rabbit cohorts underwent bilateral implantation of BM and pepCD47 stents (HC) or BM stents only (NC) in the iliac location. ResultsA 40 % inhibition of cell attachment to pepCD47-modified compared to BM surfaces was observed. HC increased neointimal growth at 4 weeks post BM stenting. These untoward outcomes were mitigated in hypercholesterolemic rabbits treated with pepCD47-derivatized stents. Compared to NC animals, inflammatory cytokine immunopositivity and macrophage infiltration of peri-strut areas increased in HC animals and were attenuated in HC rabbits treated with pepCD47 stents. ConclusionsAugmented inflammatory responses underlie severe ISR morphology in hypercholesterolemic rabbits. Blockage of initial platelet and leukocyte attachment to stent struts through CD47 functionalization of stents mitigates the pro-restenotic effects of hypercholesterolemia.

Passivation protein-adhesion platform promoting stent reendothelialization using two-electron-assisted oxidation of polyphenols

Superhydrophilic surfaces play an important role in nature. Inspired by this, scientists have designed various superhydrophilic materials that are widely used in the field of biomaterials, such as PEG molecular brushes and zwitterionic materials. However, superhydrophilic coatings with only anti-fouling properties do not satisfy the requirements for rapid reendothelialization of cardiovascular stent surfaces. Herein, a novel polyphenol superhydrophilic surface with passivated protein-adsorption properties was developed using two-electron oxidation of dopamine and polyphenols. This coating has a multiscale effects: 1) macroscopically: anti-fouling properties of superhydrophilic; 2) microscopically: protein adhesion properties of active groups (quinone-, amino-, hydroxyphenyl groups and aromatic ring). Polyphenols not only enhance the ability of coating to passivate protein-adsorption, but also make the coating have polyphenol-related biological functions. Therefore, the polyphenol and passivated protein-adsorption platform together maintain the stability of the scaffold microenvironment. This, in turn, provides favorable conditions for the growth of endothelial cells on the scaffold surface. In vivo implantation of the coated stents into the abdominal aorta resulted in uniform and dense endothelial cells covering the surface of the neointima. Moreover, new endothelial cells secreted large amounts of functional endothelial nitric oxide synthase like healthy endothelial cells. These results indicate that the polyphenol superhydrophilic coating potentially resists intra-stent restenosis and promotes surface reendothelialization. Hence, polyphenol superhydrophilic coatings with passivated protein-adsorption properties constructed by two-electron-assisted oxidation are a highly effective and versatile surface-modification strategy for implantable cardiovascular devices.

Effect of co-trimoxazole and N-acetylcysteine alone and in combination on bacterial adherence on ureteral stent surface

To assess the effect of co-trimoxazole and N-acetylcysteine (NAC), alone and in combination, on bacterial adherence to biofilm formed on ureteral stent surfaces. This prospective randomized study was conducted on 636 patients who underwent double J ureteral stent insertion after variable urological procedures. Patients were randomized into four groups: A (n = 165), no antibiotics or mucolytics during stent indwelling; B (n = 153), oral NAC (200 mg/day for children aged < 12 years old and 600 mg/day for adults) during stent indwelling; C (n = 162), oral co-trimoxazole (2 mg TMP/kg/day) during stent indwelling; and D (n = 156), both oral NAC and co-trimoxazole during stent indwelling. Two weeks following double J stent (JJ stent) insertion, urinalysis was performed on all patients and urine culture was done for all the patients at the day of double J stent removal. The stent was removed 2 weeks postoperatively, and a stent segment sized 3–5 cm from the bladder segment of the stent was sent for culture. Positive stent cultures were found in 63.6% (105/165), 43.1% (66/153), 37% (60/162), and 19.2% (30/156) patients of groups A, B, C, and D, respectively. E. coli was the organism most commonly isolated from the stent culture in all groups. The combination of co-trimoxazole and NAC was more effective in reducing bacterial adherence on ureteral stent surfaces than either alone.

Preliminary Investigation on Efficacy and Safety of Substance P-Coated Stent for Promoting Re-Endothelialization: A Porcine Coronary Artery Restenosis Model.

Current polymer-based drug-eluting stents (DESs) have fundamental issues about inflammation and delayed re-endothelializaton of the vessel wall. Substance-P (SP), which plays an important role in inflammation and endothelial cells, has not yet been applied to coronary stents. Therefore, this study compares poly lactic-co-glycolic acid (PLGA)-based everolimus-eluting stents (PLGA-EESs) versus 2-methacryloyloxyethyl phosphorylcholine (MPC)-based SP-eluting stents (MPC-SPs) in in-vitro and in-vivo models. The morphology of the stent surface and peptide/drug release kinetics from stents were evaluated. The in-vitro proliferative effect of SP released from MPC-SP is evaluated using human umbilical vein endothelial cell. Finally, the safety and efficacy of the stent are evaluated after inserting it into a pig's coronary artery. Similar to PLGA-EES, MPC-SP had a uniform surface morphology with very thin coating layer thickness (2.074μm). MPC-SP showed sustained drug release of SP for over 2weeks. Endothelial cell proliferation was significantly increased in groups treated with SP (n = 3) compared with the control (n = 3) and those with everolimus (n = 3) (SP: 118.9 ± 7.61% vs. everolimus: 64.3 ± 12.37% vs. the control: 100 ± 6.64%, p < 0.05). In the animal study, the percent stenosis was higher in MPC-SP group (n = 7) compared to PLGA-EES group (n = 7) (MPC-SP: 28.6 ± 10.7% vs. PLGA-EES: 16.7 ± 6.3%, p < 0.05). MPC-SP group showed, however, lower inflammation (MPC-SP: 0.3 ± 0.26 vs. PLGA-EES: 1.2 ± 0.48, p < 0.05) and fibrin deposition (MPC-SP: 1.0 ± 0.73 vs. PLGA-EES: 1.5 ± 0.59, p < 0.05) around the stent strut. MPC-SP showed more increased expression of cluster of differentiation 31, suggesting enhanced re-endothelialization. Compared to PLGA-EES, MPC-SP demonstrated more decreased inflammation of the vascular wall and enhanced re-endothelialization and stent coverage. Hence, MPC-SP has the potential therapeutic benefits for the treatment of coronary artery disease by solving limitations of currently available DESs.

Advances in Fabrication Technologies for the Development of Next-Generation Cardiovascular Stents.

Coronary artery disease is the most prevalent cardiovascular disease, claiming millions of lives annually around the world. The current treatment includes surgically inserting a tubular construct, called a stent, inside arteries to restore blood flow. However, due to lack of patient-specific design, the commercial products cannot be used with different vessel anatomies. In this review, we have summarized the drawbacks in existing commercial metal stents which face problems of restenosis and inflammatory responses, owing to the development of neointimal hyperplasia. Further, we have highlighted the fabrication of stents using biodegradable polymers, which can circumvent most of the existing limitations. In this regard, we elaborated on the utilization of new fabrication methodologies based on additive manufacturing such as three-dimensional printing to design patient-specific stents. Finally, we have discussed the functionalization of these stent surfaces with suitable bioactive molecules which can prove to enhance their properties in preventing thrombosis and better healing of injured blood vessel lining.

Efficacy and safety of self-made covered coronary stent in the treatment of coronary artery perforation

ObjectiveTo observe the efficacy and safety of self-made covered coronary stent in the treatment of coronary artery perforation.MethodsCovered coronary stent was prepared by wrapping 3 M film on the surface of coronary stents. The beagle dogs were divided into control group and experimental group. A drug-eluting stent (DES) was implanted in the control group. The covered stent was applied to block the coronary branches of beagle dogs. The CaIMR value after stent placement was calculated by FlashAngio software. The effect of blocking the coronary branches on blood flow was observed by coronary angiography (CAG). The condition of the implanted stent was observed by optical coherence tomography (OCT), and the histopathologic examination of the coronary vessel implanted stent was performed by HE staining.ResultsThe best number of layers was 2. Compared with the control group, the CaIMR of the experimental group increased (p < 0.05). A lot of in-stent thrombosis were found in the experimental group and obvious blood flow obstruction during follow-up. HE staining showed that stents implanted in the two groups adhered well to the wall of the blood vessel, but in-stent thrombosis and intimal hyperplasia were founded in the experimental group, while the in-stent restenosis was not founded.ConclusionThe self-made coronary covered stent can effectively block the leakage caused by coronary perforation, but the stent endothelialization is poor, which easily causes stent thrombosis and restenosis, so it is not recommended as a routine remedy.

Design and use of an ex vivo peripheral simulating bioreactor system for pharmacokinetic analysis of a drug coated stent.

Currently, there are no ex vivo systems that can model the motion of peripheral arteries and allow for the evaluation of pharmacokinetics (PK) of endovascular devices. The objective of this study was to develop a novel peripheral simulating bioreactor system to evaluate drug pharmacokinetics of stents. We utilized 3D-printed and off-the-shelf components to construct a peripheral-simulating bioreactor system capable of mimicking the motion of peripheral arteries. Servo motors were primarily used to shorten/elongate, twist, and bend explanted porcine carotid arteries. To evaluate the pharmacokinetics in the bioreactor, drug-eluting stents were deployed within explanted arteries and subjected to vascular motion along with pulsatile flow conditions. Following 30 min and 24 h, the arteries were removed, and paclitaxel levels were measured. Scanning electron microscopy was also performed to evaluate the stent surface. Arterial paclitaxel levels of the stent-treated arteries were found to be higher at 30 min than at 24 h following pulsatile and no vascular motion and even higher at 24 h following pulsatile flow and vascular motion. The residual drug on the stent significantly decreased from 30 min to 24 h. Scanning electron microscopy confirmed the loss of paclitaxel coating at 24 h and greater disturbance in stents under peripheral motion versus pulsatile only. This system represents the first ex vivo system to determine the PK of drug-eluting stents under physiological flow and vascular motion conditions. This work provides a novel system for a quick and inexpensive preclinical tool to study acute drug tissue concentration kinetics of drug-releasing interventional vascular devices designed for peripheral applications.

Surface Engineering of Bioactive Coatings for Improved Stent Hemocompatibility: A Comprehensive Review.

Cardiovascular diseases continue to be a major contributor to illness and death on a global scale, and the implementation of stents has given rise to a revolutionary transformation in the field of interventional cardiology. The thrombotic and restenosis complications associated with stent implantation pose ongoing challenges. In recent years, bioactive coatings have emerged as a promising strategy to enhance stent hemocompatibility and reduce thrombogenicity. This review article provides an overview of the surface engineering techniques employed to improve the hemocompatibility of stents and reduce thrombus formation. It explores the mechanisms underlying thrombosis and discusses the factors influencing platelet activation and fibrin formation on stent surfaces. Various bioactive coatings, including anticoagulant agents, antiplatelet agents, and surface modifications, are discussed in detail, highlighting their potential in reducing thrombogenicity. This article also highlights a multitude of surface modification techniques which can be harnessed to enhance stent hemocompatibility including plasma treatment, physical vapor deposition (PVD), chemical vapor deposition (CVD), and electrodeposition. These techniques offer precise control over surface properties such as roughness, charge, and composition. The ultimate goal is to reduce platelet adhesion, tailor wettability, or facilitate the controlled release of bioactive agents. Evaluation methods for assessing hemocompatibility and thrombogenicity are also reviewed, ranging from in vitro assays to animal models. Recent advances in the field, such as nanotechnology-based coatings and bioactive coatings with controlled drug release systems, are highlighted. Surface engineering of bioactive coatings holds great promise for enhancing the long-term outcomes of stent implantation by enhancing hemocompatibility and reducing thrombogenicity. Future research directions and potential clinical applications are discussed, underscoring the need for continued advancements in this field.

Antimicrobial and Antiproliferative Coatings for Stents in Veterinary Medicine-State of the Art and Perspectives.

Microbial colonization in veterinary stents poses a significant and concerning issue in veterinary medicine. Over time, these pathogens, particularly bacteria, can colonize the stent surfaces, leading to various complications. Two weeks following the stent insertion procedure, the colonization becomes observable, with the aggressiveness of bacterial growth directly correlating with the duration of stent placement. Such microbial colonization can result in infections and inflammations, compromising the stent's efficacy and, subsequently, the animal patient's overall well-being. Managing and mitigating the impact of these pathogens on veterinary stents is a crucial challenge that veterinarians and researchers are actively addressing to ensure the successful treatment and recovery of their animal patients. In addition, irritation of the tissue in the form of an inserted stent can lead to overgrowth of granulation tissue, leading to the closure of the stent lumen, as is most often the case in the trachea. Such serious complications after stent placement require improvements in the procedures used to date. In this review, antibacterial or antibiofilm strategies for several stents used in veterinary medicine have been discussed based on the current literature and the perspectives have been drawn. Various coating strategies such as coating with hydrogel, antibiotic, or other antimicrobial agents have been reviewed.