Surface Of Silica Nanoparticles Research Articles

Study of the anti-cancer activity of a mesoporous silica nanoparticle surface coated with polydopamine loaded with umbelliprenin

A mesoporous silica nanoparticle (MSN) coated with polydopamine (PDA) and loaded with umbelliprenin (UMB) was prepared and evaluated for its anti-cancer properties in this study. Then UMB-MSN-PDA was characterized by dynamic light scattering (DLS), Field emission scanning electron microscopy (FESEM), Transmission electron microscopy (TEM) and FTIR methods. UV-visible spectrometry was employed to study the percentage of encapsulation efficiency (EE%). UMB-MSN-PDA mediated cell cytotoxicity and their ability to induce programmed cell death were evaluated by MTT, real-time qPCR, flow cytometry, and AO/PI double staining methods. The size of UMB-MSN-PDA was 196.7 with a size distribution of 0.21 and a surface charge of −41.07 mV. The EE% was 91.92%. FESEM and TEM showed the spherical morphology of the UMB-MSN-PDA. FTIR also indicated the successful interaction of the UMB and MSN and PDA coating. The release study showed an initial 20% release during the first 24 h of the study and less than 40% during 168 h. The lower cytotoxicity of the UMB-MSN-PDA against HFF normal cells compared to MCF-7 carcinoma cells suggested the safety of formulation on normal cells and tissues. The induction of apoptosis in MCF-7 cells was indicated by the upregulation of P53, caspase 8, and caspase 9 genes, enhanced Sub-G1 phase cells, and the AO/PI fluorescent staining. As a result of these studies, it may be feasible to conduct preclinical studies shortly to evaluate the formulation for its potential use in cancer treatment.

Chemically Powered Nanomotors with Magnetically Responsive Function for Targeted Delivery of Exosomes.

Janus structure plays a crucial role in achieving chemically driven nanomotors with exceptional motion performance. However, Janus-structured chemically driven nanomotors with magnetic responsiveness are commonly fabricated by sputtering metal films. In the study, a self-assembly technique is employed to asymmetrically modify the surfaces of magnetic silica (SiO2@Fe3O4) nanoparticles with platinum nanoparticles, resulting in the formation of this kind nanomotors. Compared to platinumfilm, platinum nanoparticles exhibit a larger surface area and a higher catalytic activity. Hence, the nanomotors demonstrate improved diffusion capabilities at a significantly lower concentration (0.05%) of hydrogen peroxide (H2O2). Meanwhile, exosomes have gained attention as a potential tool for the efficient delivery of biological therapeutic drugs due to their biocompatibility. However, the clinical applications of exosomes are limited by their restricted tropism. The previously obtained nanomotors are utilized to deliver exosomes, greatly enhancing its targetability. The drug doxorubicin (DOX) is subsequently encapsulated within exosomes, acting as a representative drug model. Under the conditions of H2O2 concentration at the tumor site, the exosomes exhibited a significantly enhanced rate of entry into the breast cancercells. The utilization of the nanomotors for exosomes presents a novel approach in the development of hybrid chemically and magnetically responsive nanomotors.

Effects of Different Surface Functionalizations of Silica Nanoparticles on Mesenchymal Stem Cells.

Physicochemical properties of nanoparticles, such as particle size, surface charge, and particle shape, have a significant impact on cell activities. However, the effects of surface functionalization of nanoparticles with small chemical groups on stem cell behavior and function remain understudied. Herein, we incorporated different chemical functional groups (amino, DETA, hydroxyl, phosphate, and sulfonate with charges of +9.5, + 21.7, -14.1, -25.6, and -37.7, respectively) to the surface of inorganic silica nanoparticles. To trace their effects on mesenchymal stem cells (MSCs) of rat bone marrow, these functionalized silica nanoparticles were used to encapsulate Rhodamine B fluorophore dye. We found that surface functionalization with positively charged and short-chain chemical groups facilitates cell internalization and retention of nanoparticles in MSCs. The endocytic pathway differed among functionalized nanoparticles when tested with ion-channel inhibitors. Negatively charged nanoparticles mainly use lysosomal exocytosis to exit cells, while positively charged nanoparticles can undergo endosomal escape to avoid scavenging. The cytotoxic profiles of these functionalized silica nanoparticles are still within acceptable limits and tolerable. They exerted subtle effects on the actin cytoskeleton and migration ability. Last, phosphate-functionalized nanoparticles upregulate osteogenesis-related genes and induce osteoblast-like morphology, implying that it can direct MSCs lineage specification for bone tissue engineering. Our study provides insights into the rational design of biomaterials for effective drug delivery and regenerative medicine.

ARGET-ATRP-Mediated Grafting of Bifunctional Polymers onto Silica Nanoparticles Fillers for Boosting the Performance of High-Capacity All-Solid-State Lithium-Sulfur Batteries with Polymer Solid Electrolytes.

The shuttle effect in lithium-sulfur batteries, which leads to rapid capacity decay, can be effectively suppressed by solid polymer electrolytes. However, the lithium-ion conductivity of polyethylene oxide-based solid electrolytes is relatively low, resulting in low reversible capacity and poor cycling stability of the batteries. In this study, we employed the activator generated through electron transfer atom transfer radical polymerization to graft modify the surface of silica nanoparticles with a bifunctional monomer, 2-acrylamide-2-methylpropanesulfonate, which possesses sulfonic acid groups with low dissociation energy for facilitating Li+ migration and transfer, as well as amide groups capable of forming hydrogen bonds with polyethylene oxide chains. Subsequently, the modified nanoparticles were blended with polyethylene oxide to prepare a solid polymer electrolyte with low crystallinity and high ion conductivity. The resulting electrolyte demonstrated excellent and stable electrochemical performance, with a discharge-specific capacity maintained at 875.2 mAh g-1 after 200 cycles.

Ordered Mesoporous Silica Delivering siRNA as Cancer Nanotherapeutics: A Comprehensive Review.

Nanosized mesoporous silica has emerged as a promising flexible platform delivering siRNA for cancer treatment. This ordered mesoporous nanosized silica provides attractive features of well-defined and tunable porosity, structure, high payload, and multiple functionalizations for targeted delivery and increasing biocompatibility over other polymeric nanocarriers. Moreover, it also overcomes the lacunae associated with traditional administration of drugs. Chemically modified porous silica matrix efficiently entraps siRNA molecules and prevents their enzymatic degradation and premature release. This Review discusses the synthesis of silica using the sol-gel approach and the advantages with different silica mesostructure. Herein, the factors affecting the synthesis of silica at nanometer scale, shape, porosity and nanoparticle surface modification are also highlighted to attain the desired nanostructured silica carriers. Additional emphasis is given to chemically modified silica delivering siRNA, where the silica nanoparticle surface was modified with different chemical moieties such as amine modified with (3-aminoropyl) triethoxysilane, polyethylenimine, chitosan, poly(ethylene glycol), and cyclodextrin polymer modification to attain high therapeutic loading, improved dispersibility and biocompatibility. Upon systemic administration, ordered mesoporous nanosized silica encounters blood cells, immune cells, and organs mainly of the reticuloendothelial system (RES). Thereby, biocompatibility and biodistribution of silica based nanocarriers are deliberated to design principles for smart and efficacious nanostructured silica-siRNA carriers and their clinical trial status. This Review further reports the future scopes and challenges for developing silica nanomaterial as a promising siRNA delivery vehicle demanding FDA approval.

Kinetic Model for the Heterogeneous Biocatalytic Reactions Using Tethered Cofactors.

Understanding the mechanism of interfacial enzyme kinetics is critical to the development of synthetic biological systems for the production of value-added chemicals. Here, the interfacial kinetics of the catalysis of β-nicotinamide adenine dinucleotide (NAD+)-dependent enzymes acting on NAD+ tethered to the surface of silica nanoparticles (SiNPs) has been investigated using two complementary and supporting kinetic approaches: enzyme excess and reactant (NAD+) excess. Kinetic models developed for these two approaches characterize several critical reaction steps including reversible enzyme adsorption, complexation, decomplexation, and catalysis of the surface-bound enzyme/NAD+ complex. The analysis reveals a concentrating effect resulting in a very high local concentration of enzyme and cofactor on the particle surface, in which the enzyme is saturated by surface-bound NAD, facilitating a rate enhancement of enzyme/NAD+ complexation and catalysis. This resulted in high enzyme efficiency within the tethered NAD+ system compared to that of the free enzyme/NAD+ system, which increases with decreasing enzyme concentration. The role of enzyme adsorption onto solid substrates with a tethered catalyst (such as NAD+) has potential for creating highly efficient flow biocatalytic systems.

A non-residue surface modification strategy for active-targeting fluorescent silica nanoparticles to cellular organelles.

Silica nanoparticles (SiNPs) with a chemically modified surface typically have a complicated chemical composition, which can significantly differ from their intended design. In this study, we systematically studied the effects of two surface modification methods on active-targeting of intracellular organelles of SiNPs: (1) the widely used step-by-step approach, which involves modifying SiNPs in two steps, i.e., the outer surface of SiNPs was firstly modified with amino groups and then these amino groups were linkedwith targeting groups, and (2) a newly developed one-step approach in which the ligand-silane complex is initially synthesized, followed by chemically immobilizing the complex on the surface of SiNPs. In the one-step approach, the molar ratio of reactants was precisely tuned so that there are no reactive groups left on the outer surface of SiNPs. Two essential organelles, mitochondria and the nucleus, were selected to compare the targeting performances of SiNPs synthesized via these two approaches. By characterizing physicochemical properties, including structural properties, the number of amino groups, surface charge, polydispersity, and cell colocalization, we demonstrated that SiNPs synthesized via the one-step approach with no residual linkage groups on their surface showed significantly improved mitochondria- and nucleus-targeting performances. This precise control of surface properties allows for optimized biological behavior and active-targeting efficiency of SiNPs. We anticipate that such simple and efficient synthetic strategies will enable the synthesis of effective SiNPs for active-targeting organelles in various biological applications.

PH-responsive composite nanomaterial engineered from silica nanoparticles and luminescent mitochondrion-targeted Pt(II) complex as anticancer agent

The present work introduces a pH-dependent adsorption of water-soluble Pt(II) complex with diimine and alkynylphosphonium ligands ([Pt]2+) onto a surface of silica nanoparticles (SN-OH) as a strategy to develop a carrier function with an acidification-driven release of the complex. The adsorption of the complex onto a negatively charged silica surface shifts the equilibrium between dimeric and monomeric complex forms. The surface loading of [Pt]2+ is efficient at pH 7.0, and the acidification to pH 4.5 triggers the complex release. The interaction of [Pt]2+ with bovine serum albumin (BSA) influences the cell internalization and intracellular pathway of the complex, as well as the formation of the [Pt]2+-loaded SN-OH protein corona. The cytotoxicity data for the series of cancer and normal cell lines reveal the loading of [Pt]2+ into SN-OH as an efficient route for lower cytotoxicity and greater anticancer specificity of the nanoparticles compared to the complex. The flow cytometry and confocal microscopy methods reveal similarities in the cell internalization and intracellular pathway of [Pt]2+ and the [Pt]2+-loaded nanoparticles. The mitochondrial localization of [Pt]2+ and the [Pt]2+-loaded SN-OH does not cause noticeable changes in the membrane potential of mitochondria, and the cytotoxicity of [Pt]2+ in both forms is due to a non-apoptotic mechanism of cell death. Both the cytotoxicity and increased anticancer specificity of nanoparticles are associated with their carrier function, which is more pronounced in cancer cells with overdeveloped lysosomal compartments compared to normal ones.

PVDF-HFP Based, Quasi-Solid Nanocomposite Electrolytes for Lithium Metal Batteries.

Composite polymer electrolytes are systems of choice for future solid-state lithium metal batteries (LMBs). Poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) is among the most interesting matrices to develop new generation quasi-solid electrolytes (QSEs). Here it is reported on nanocomposites made of PVDF-HFP and pegylated SiO2 nanoparticles. Silica-based hybrid nanofillers are obtained by grafting chains of poly(ethylene glycol) methyl ether (PEG) with different molecular weight on the surface of silica nanoparticles. The functionalized nanofiller improves the mechanical, transport and electrochemical properties of the QSEs, which show good ionic conductivity values and high resistance against dendrite penetration, ensuring boosted long and safe device operation. The most promising result is obtained by dispersing 5wt% of SiO2 functionalized with short PEG chains (PEG750 , Mw = 750gmol-1 ) in the PVDF-HFP matrix with an ease solvent-casting procedure. It shows ionic conductivity of 0.1mScm-1 at 25°C, more than 250h resistance to stripping/plating, and impressive results during cycling tests in LMB with LiFePO4 cathode.

Assembly of Zinc‐Single‐Site‐Containing Silica Nanoparticles to Supraparticle Powders with Destructibility to Serve as Filler and Vulcanization Activator in Rubbers

AbstractThe vulcanization process is widely used in industry for tire manufacturing. Therefore, zinc oxide is commonly utilized as an activator material, but unreacted zinc oxide remains in the final products and can be released into the environment with a significant impact. To reduce the amount of required zinc and to prevent leaching from tire material, zinc single site‐containing silica fillers are interesting candidates. In these materials, zinc sites are anchored on the surface of silica nanoparticles through their complexation with functionalized aminosilanes. Based on these, a novel powder sample is prepared via spray‐drying. The obtained supraparticles allow for a homogeneous distribution of the filler nanoparticles in the rubber matrix via their disintegration during the incorporation process. All synthesis steps are carried out in ethanol and water, respectively, at very mild temperatures to account for sustainability demands. As core of this study, the role of zinc ions and their amino‐complexation in nanoparticle dispersion stability and in supraparticle formation during spray‐drying is elucidated. Additionally, the superior performance of supraparticles as activator in rubber vulcanization is demonstrated. These show a higher curing efficiency, leading to lower curing time (−70%), higher torque values (+15%), and improved dynamic mechanical properties compared to the conventional ZnO activator.

Surfactant-free synthesis of mesoporous silica materials (Using tetraetylorthosilicate and oleic acid): Preparation, characterization, and catalytic applications

Mesoporous silica nanoparticles (MSNs), one of the important porous materials, have attracted enormous interest due to their exceptional physical and chemical properties. The present study describes a non-surfactant templating route to mesoporous silica materials with large surface areas (617 m2 g−1) and pore volumes (0.6374 cm3 g−1) using the oleic acid template that plays two important roles: as a catalyst for hydrolysis of silicon alkoxide and well-defined three-dimensional arrangement of silica nanospheres (as a natural). The silica was calcined and studied using several techniques such as FE-SEM, FT-IR, XRD, TEM, and BET. Afterward, the surfaces of the mesoporous silica nanoparticles (MSNs) were modified and used as a catalyst for synthesizing pyrazolopyranopyrimidines and pyrido[2,3-d:6,5-d]dipyrimidines.

Development of amine-functionalized fluorescent silica nanoparticles from coal fly ash as a sustainable source for nanofertilizer

Scaling up the synthesis of fluorescent silica nanoparticles to meet the current demand in diverse applications involves technological limitations. The present study relates to the hydrothermal synthesis of water-soluble, crystalline, blue-emitting amine-functionalized silica nanoparticles from coal fly ash sustainably and economically. This study used tertiary amine (trimethylamine) to prepare amine-functionalized fluorescent silica nanoparticles, enhancing fluorescence quantum yield and nitrogen content for nanofertilizer application. The TEM and FESEM studies show that the silica nanoparticles have a spherical morphology with an average diameter of 4.0 nm. The x-ray photoelectron and Fourier transform infrared spectroscopy studies reveal the presence of the amine group at the surface of silica nanoparticles. The silica nanoparticles exhibit blue fluorescence with an emission maximum of 454 nm at 370 nm excitation and show excitation-dependent emission properties in the aqueous medium. With the perfect spectral overlap between silica nanoparticle emission (donor) and chlorophyll absorption (acceptor), fluorescent silica nanoparticles enhance plant photosynthesis rate by resonance energy transfer. This process accelerates the photosynthesis rate to improve the individual plant’s quality and growth. These findings suggested that the fly ash-derived functionalized silica nanoparticles could be employed as nanofertilizers and novel delivery agents.

Diffusion of Water Molecules on the Surface of Silica Nanoparticles─Insights from Nuclear Magnetic Resonance Relaxometry.

1H spin-lattice nuclear magnetic resonance (NMR) relaxation experiments have been performed for water dispersions of functionalized silica nanoparticles of diameters of 25 and 45 nm. The experiments have been performed in a broad frequency range spanning 3 orders of magnitude, from 10 kHz to 10 MHz, versus temperature, from 313 to 263 K. On the basis of the data, two-dimensional translation diffusion (diffusion close to the nanoparticle surface within a layer of the order of a few diameters of water molecules) has been revealed. The translational correlation times as well as the residence life times on the nanoparticle surface have been determined. It has turned out that the residence lifetime is temperature-independent and is on the order of 5 × 10-6 s for the smaller nanoparticles and by about a factor of 3 longer for the larger ones. The translational correlation time for the case of 25 nm nanoparticles is also temperature-independent and yields about 6 × 10-7 s, while for the dispersion of the larger nanoparticles, the correlation times changed from about 8 × 10-7 s at 313 K to about 1.2 × 10-6 s at 263 K. In addition to the quantitative characterization of the two-dimensional translation diffusion, correlation times associated with bound water molecules have been determined. The studies have also given insights into the population of the bound and diffusing water on the surface water fractions.

Development of a prototype of a theranostic system based on silica nanoparticles with immobilized fluorescent dyes and VEGF targeting ligand.

Background. Administration of certain drugs causes undesirable effects associated with the systemic effect of the active substance on the entire body. Selective targeting of the drug to the affected tissue promotes a selective increase in the concentration of the substance in the area of interest, thereby reducing the systemic effect and enhancing the local therapeutic effect.Objective. Development of a targeted delivery system for theranostic agents using recombinant human vascular endothelial growth factor type A (rhVEGF-A121) as a targeting ligand.Design and method. To create the theranostic complex, commercially available reagents were used: the recombinant protein rhVEGF-A121 (cat.#: PSG140-10, LLC CyStorLab, Skolkovo, Russia) and fumed silica Aerosil (A-200, Degussa AG, Germany). The tosyl spacer that interconnects both components was synthesized in the laboratory. Protein conjugation with fluorophores was also carried out in-house. Indocyanine green (ICG; Sigma-Aldrich, USA) and rhodamine B (JSC Lenreaktiv, St. Petersburg, Russia) were taken for immobilization.Results. In the course of the work, functionalization of silica nanoparticles (SiNPs) with a tosyl spacer was carried out, conjugates of SiNPs with rhVEGF-A121 were synthesized, and theranostic constructs based on SiNPs were obtained, including rhVEGF-A121 as a targeting ligand, and ICG/Rhodamine B as a visualizing label.Conclusion. In the presented study, a prototype of a complex for targeted delivery of a theranostic agent to tissues with an active angiogenesis process, for example, to tumor and ischemic tissues, was developed. To solve the problem, we immobilized on the surface of SiNP a recombinant protein of human vascular endothelial growth factor (rhVEGF) to use as a guide ligand. Such a synthetic construct will help to deliver diagnostic and/ or medicinal substances packed in SiNP directly to cells that overexpress extracellular specific receptors of the VEGFR family. In subsequent in vivo experiments, delivery efficiency will be assessed by tissue accumulation of the fluorophores ICG and rhodamine B, which have been conjugated to the targeting ligand protein. The physicochemical characteristics of the obtained samples were studied by the methods of spectrophotometry and dynamic light scattering.

The relationship between cellular microstructure and the mechanical properties of styrene/methyl methacrylate copolymer‐silica nanocomposite foams prepared by a supercritical CO2 blowing agent

AbstractStyrene/methyl methacrylate (St/MMA) copolymer‐silica nanocomposite foams were prepared using supercritical CO2 as blowing agent, and the relationships between their cellular microstructure and mechanical properties were investigated. The effects of nanosilica content, size, and surface chemistry on the foam's microstructure and properties were examined. Dispersion and distribution of silica nanoparticles with different surface chemistry in St/MMA copolymer nanocomposites were discussed. To determine the most suitable copolymer composition for incorporating silica nanoparticles, some operating conditions such as temperature and pressure were primarily examined to study their effects on the microstructure of resulting foams. In compressive mechanical properties of final foams, a considerably high value was obtained for the compressive strength of the foams of up to 9.5 MPa. The prepared low‐density (below 0.2 g/cm3) St/MMA copolymer microcellular foams can be used in green lost foam iron casting processes.Highlights Styrene/methyl methacrylate copolymer‐silica nanocomposite foams were prepared via supercritical CO2. Foams' cell size was changed by changing silica nanoparticle surface chemistry and size. The uniform cellular microstructure was achieved by nanosilica size increment. Increasing nanoparticle size improved the foam's mechanical properties. Low‐density foams were achieved for potential application in lost foam casting.

Silica Nanoparticle Exposure Implicates β-Amyloid (1-42) Inbound and the Accelerating Alzheimer's Disease Progression in Mice Overexpressing Mutated Forms of Human Amyloid Precursor Protein and Presenilin 1 Genes.

The increasing nanoparticle (NP) applications in the biomedical field have become an emerging concern regarding human health. NP exposure may play a role in the accelerating Alzheimer's disease (AD) progression; however, the etiology of this disorder is complex and remains largely unclear. Here, we identified that intravenous injection of silica NPs (SiNPs) caused the blood-brain barrier breakdown via downregulating tight junction-related gene expressions. Meanwhile, SiNPs upregulate the transport receptor for advanced glycation end products (RAGE) that govern the β-amyloid (Aβ) influx to the brain; however, low-density lipoprotein receptor-related protein 1 (LRP1) that controls the efflux of Aβ from the brain was not affected. Consequently, an increase in Aβ burden in the brain of SiNP-challenged APP/PS1 mice was found. Intriguingly, plasma apolipoprotein E (ApoE) adsorbed on the surface of SiNPs partially relieves this effect. Using ApoE knockout (ApoE-/-) mice, we confirmed that SiNPs covered with serum without ApoE showed further elevated AD symptoms. Together, this study offered a compilation of data to support the potential risk factors of NP exposure and AD pathology.

Morphological and structural design through hard-templating of PGM-free electrocatalysts for AEMFC applications.

This study delves into the critical role of customized materials design and synthesis methods in influencing the performance of electrocatalysts for the oxygen reduction reaction (ORR) in anion exchange membrane fuel cells (AEMFCs). It introduces a novel approach to obtain platinum-free (PGM-free) electrocatalysts based on the controlled integration of iron active sites onto the surface of silica nanoparticles (NPs) by using nitrogen-based surface ligands. These NPs are used as hard templates to form tailored nanostructured electrocatalysts with an improved iron dispersion into the carbon matrix. By utilizing a wide array of analytical techniques including infrared and X-ray photoelectron spectroscopy techniques, X-ray diffraction and surface area measurements, this work provides insight into the physical parameters that are critical for ORR electrocatalysis with PGM-free electrocatalysts. The new catalysts showed a hierarchical structure containing a large portion of graphitic zones which contribute to the catalyst stability. They also had a high electrochemically active site density reaching 1.47 × 1019 sites g-1 for SAFe_M_P1AP2 and 1.14 × 1019 sites g-1 for SEFe_M_P1AP2, explaining the difference in performance in fuel cell measurements. These findings underscore the potential impact of a controlled materials design for advancing green energy applications.

The preparation of a boronate affinity-based controlled oriented imprinting coating on a silica nanoparticle surface for the separation and purification of shikimic acid in herbal medicine.

Shikimic acid (SA) is one of the most effective drugs against the A (H1N1) virus and has high medicinal value. Additionally, it has the ability to generate non-toxic herbicides and antimicrobial medications. The extraction from plants has proven to be the main route of production of SA with economic benefits and environmental efficiency. Therefore, it is necessary to perform purification of SA from these herbal medicines before quantifying it. In this study, researchers employed a boronate affinity-based controlled oriented surface imprinting technique to produce molecularly imprinted polymers (MIPs) as highly effective solid phase extraction (SPE) adsorbents for the isolation and purification of SA. 3-Fluoro-4-formylphenylboronic acid functionalized silica nanoparticles were used as supporting materials for immobilizing SA. Poly(2-anilinoethanol) with a higher hydrophilic domain can be used as an effective imprinting coating. The prepared SA-imprinted silica nanoparticles exhibited several significant results, such as good specificity, high binding capacity (39.06 ± 2.24 mg g-1), moderate binding constant (6.61 × 10-4 M-1), fast kinetics (8 min) and low binding pH (pH 5.0) toward SA. The replication of SA-imprinted silica nanoparticles was deemed satisfactory. The SA-imprinted silica nanoparticles could be still reused after seven adsorption-desorption cycles, which indicated high chemical stability. In addition, the recoveries of the proposed method for SA at three spiked level analysis in star aniseed and meadow cranesbill were 96.2% to 109.0% and 91.6% to 103.5%, respectively. The SA-imprinted silica nanoparticles that have been prepared are capable of identifying the target SA in real herbal medicines. Our approach makes sample pre-preparation simple, fast, selective and efficient.

Enhanced adaptation to salinity stress in lentil seedlings through the use of trehalose-functionalized silica nanoparticles (TSiNPs): Exploring silica-sugar absorption and oxidative balance

Silica nanoparticles (SiNPs) confer better growth and development of plants under salinity stress. Moreover, the surface-functionalization of SiNPs with bioactive molecules is expected to enhance its efficacy. The present study thus aimed to modify the surface of SiNPs, by attaching a bioactive molecule (trehalose) to obtain TSiNPs. The successful surface functionalization was confirmed using FTIR, XRD, and EDS. The spherical shape and amorphous nature of the nanoparticles were confirmed using SEM. The TEM image analysis revealed that the size of SiNPs and TSiNPs ranged between 20-50 nm and 200–250 nm, respectively. A novel bioassay experiment designed to study the release of silica and trehalose from nanoparticles elucidated that the TSiNPs improved the release and uptake of silica. Also, trehalose uptake significantly improved after 72 h of application due to enhanced release of trehalose from TSiNPs. Further, this study also aimed to investigate the potential benefits of SiNPs and TSiNPs in promoting the growth and development of plants under salinity stress. In this context, the nanoparticles were applied to the saline-stressed (0, 200, 300 mM) lentil seedlings for the in-planta experiments. The results revealed that both SiNPs and TSiNPs improved the growth of seedlings (shoot, and root length), ionic balance (K+/Na+ ratio), and osmolyte status (sugars, proline, glycine betaine, trehalose). Additionally, increased antioxidant enzyme activities helped scavenge ROS (H2O2, O2.-) generated in NaCl-stressed seedlings, ultimately improving the membrane integrity (by reducing MDA and EL). However, the TSiNPs exhibited a much-enhanced activity in stress alleviation compared to the SiNPs.

Human lung cell cytotoxicity of antibacterial-loaded silica nanoparticles

Silica nanoparticles (SiNPs) are extensively used in multiple biomedical and drug delivery applications. We synthesized, characterized, and assessed the role of SiNP size in several human cell types. SiNPs of different sizes (60 nm, 100 nm, and 300 nm) were synthesized via the Stöber method and their surface was modified by the grafting of ligands (-OH bare, –NH2 amino, and –SH thiol) using organosilane chemistry. SiNPs size, dispersity, and surface were determined by scattering electron microscopy (SEM), hydrodynamic diameter by dynamic light scattering (DLS), and surface grafting by Fourier-transform infrared spectroscopy (FT-IR). Results show no evident cytotoxicity in the tested concentrations and time-courses, up to 30 ppm and 72 h on human cervical (HeLA), lung (A549) and glioblastoma (U251) cells. Fluorescent; rhodamine-labeled SiNPs grafted with positively charged groups were taken up more at greater amounts than unfunctionalized-SiNPs. Rifampicin and vancomycin loading was suitable only in thiolated-SiNPs. SiNPs loaded with rifampicin released the drug and were active against Staphylococcus aureus cultures in a concentration-dependent manner, suggesting that SiNPs could be used for bacterial infections treatment where the localized antibiotic release is desired.