Surface Of Fibrils Research Articles

Ligand Profiling to Characterize Different Polymorphic Forms of α-Synuclein Aggregates.

The presence of amyloid fibrils is a characteristic feature of many diseases, most famously neurodegenerative disease. The supramolecular structure of these fibrils appears to be disease-specific. Identifying the unique morphologies of amyloid fibrils could, therefore, form the basis of a diagnostic tool. Here we report a method to characterize the morphology of α-synuclein (αSyn) fibrils based on profiling multiple different ligand binding sites that are present on the surfaces of fibrils. By employing various competition binding assays, seven different types of binding sites were identified on four different morphologies of αSyn fibrils. Similar binding sites on different fibrils were shown to bind ligands with significantly different affinities. We combined this information to construct individual profiles for different αSyn fibrils based on the distribution of binding sites and ligand interactions. These results demonstrate that ligand-based profiling can be used as an analytical method to characterize fibril morphologies with operationally simple fluorescence binding assays.

Cationic amphiphilic acrylic copolymer retanning agent for metal-free eco-leather production

Producing metal-free leather is an effective approach to eliminate Cr pollution and achieve sustainable development of the leather industry. However, the high water sorption of the metal-free leather and the mismatching of the charge properties between the metal-free tanned leather and anionic post-tanning chemicals result in the unsatisfactory properties of the leather products, thereby restricting the industrial application of metal-free tanning technologies. Herein, a series of cationic amphiphilic acrylic copolymers (PSD) with different molar ratios of hydrophobic monomer to cationic hydrophilic monomer were synthesized and applied in the retanning of a metal-free tanned leather. PSD can effectively penetrate to the hierarchy of collagen fibril of leather and firmly bind to collagen carboxyls to form a thin hydrophobic coating on the fibril surface due to their small particle size (< 70 nm), excellent surface activity and cationic amine groups (3–27 μmol/g). Molecular dynamics (MD) simulations confirm that the primary driving force between PSD and collagen is electrostatic interaction. MD simulations and water resistance tests demonstrate that the amphiphilic PSD provides the metal-free leather with moderate hydrophobicity, which indicates the upgrade of the comprehensive properties of leather. PSD retanning enhances the uptake rate of anionic dyes and fatliquors (> 90 %) and endows the metal-free leather with excellent filling effect and bright color. The molar ratio of hydrophilic monomer and hydrophobic monomer plays an important role in the performance of PSD. The hydrophobic segments contribute to the hydrophobicity enhancement of leather, and the cationic hydrophilic segments in PSD contribute to the charge regulation of leather and robust binding of post-tanning chemicals. Hence, the multifunctional PSD retanning agents can fulfill the demands for versatile metal-free leather types and promise to boost the sustainable development of the leather industry.

Peptide Amphiphiles as Biodegradable Adjuvants for Efficient Retroviral Gene Delivery.

Retroviral gene delivery is the key technique for in vitro and ex vivo gene therapy. However, inefficient virion-cell attachment resulting in low gene transduction efficacy remains a major challenge in clinical applications. Adjuvants for ex vivo therapy settings need to increase transduction efficiency while being easily removed or degraded post-transduction to prevent the risk of venous embolism after infusing the transduced cells back to the bloodstream of patients, yet no such peptide system have been reported thus far. In this study, peptide amphiphiles (PAs) with a hydrophobic fatty acid and a hydrophilic peptide moiety that reveal enhanced viral transduction efficiency are introduced. The PAs form β-sheet-rich fibrils that assemble into positively charged aggregates, promoting virus adhesion to the cell membrane. The block-type amphiphilic sequence arrangement in the PAs ensures efficient cell-virus interaction and biodegradability. Good biodegradability is observed for fibrils forming small aggregates and it isshown that via molecular dynamics simulations, the fibril-fibril interactions of PAs are governed by fibril surface hydrophobicity. These findings establish PAs as additives in retroviral gene transfer, rivalling commercially available transduction enhancers in efficiency and degradability with promising translational options in clinical gene therapy applications.

The C-terminal domain of the antiamyloid chaperone DNAJB6 binds to amyloid-β peptide fibrils and inhibits secondary nucleation

The DNAJB6 chaperone inhibits fibril formation of aggregation-prone client peptides through interaction with aggregated and oligomeric forms of the amyloid peptides. Here, we studied the role of its C-terminal domain (CTD) using constructs comprising either the entire CTD or the first two or all four of the CTD β-strands grafted onto a scaffold protein. Each construct was expressed as WT and as a variant with alanines replacing five highly conserved and functionally important serine and threonine residues in the first β-strand. We investigated the stability, oligomerization, antiamyloid activity, and affinity for amyloid-β (Aβ42) species using optical spectroscopy, native mass spectrometry, chemical crosslinking, and surface plasmon resonance technology. While DNAJB6 forms large and polydisperse oligomers, CTD was found to form only monomers, dimers, and tetramers of low affinity. Kinetic analyses showed a shift in inhibition mechanism. Whereas full-length DNAJB6 activity is dependent on the serine and threonine residues and efficiently inhibits primary and secondary nucleation, all CTD constructs inhibit secondary nucleation only, independently of the serine and threonine residues, although their dimerization and thermal stabilities are reduced by alanine substitution. While the full-length DNAJB6 inhibition of primary nucleation is related to its propensity to form coaggregates with Aβ, the CTD constructs instead bind to Aβ42 fibrils, which affects the nucleation events at the fibril surface. The retardation of secondary nucleation by DNAJB6 can thus be ascribed to the first two β-strands of its CTD, whereas the inhibition of primary nucleation is dependent on the entire protein or regions outside the CTD.

An ankyrin repeat chaperone targets toxic oligomers during amyloidogenesis.

Numerous age-linked diseases are rooted in protein misfolding; this has motivated the development of small molecules and therapeutic antibodies that target the aggregation of disease-linked proteins. Here we explore another approach: molecular chaperones with engineerable protein scaffolds such as the ankyrin repeat domain (ARD). We tested the ability of cpSRP43, a small, robust, ATP- and cofactor-independent plant chaperone built from an ARD, to antagonize disease-linked protein aggregation. cpSRP43 delays the aggregation of multiple proteins including the amyloid beta peptide (Aβ) associated with Alzheimer's disease and α-synuclein associated with Parkinson's disease. Kinetic modeling and biochemical analyses show that cpSRP43 targets early oligomers during Aβ aggregation, preventing their transition to a self-propagating nucleus on the fibril surface. Accordingly, cpSRP43 rescued neuronal cells from the toxicity of extracellular Aβ42 aggregates. The substrate-binding domain of cpSRP43, composed primarily of the ARD, is necessary and sufficient to prevent Aβ42 aggregation and protect cells against Aβ42 toxicity. This work provides an example in which an ARD chaperone non-native to mammalian cells harbors anti-amyloidal activity, which may be exploited for bioengineering.

Development of an α-synuclein positron emission tomography tracer for imaging synucleinopathies

Synucleinopathies are characterized by the accumulation of α-synuclein (α-Syn) aggregates in the brain. Positron emission tomography (PET) imaging of synucleinopathies requires radiopharmaceuticals that selectively bind α-Syn deposits. We report the identification of a brain permeable and rapid washout PET tracer [18F]-F0502B, which shows high binding affinity for α-Syn, but not for Aβ or Tau fibrils, and preferential binding to α-Syn aggregates in the brain sections. Employing several cycles of counter screenings with invitro fibrils, intraneuronal aggregates, and neurodegenerative disease brain sections from several mice models and human subjects, [18F]-F0502B images α-Syn deposits in the brains of mouse and non-human primate PD models. We further determined the atomic structure of the α-Syn fibril-F0502B complex by cryo-EM and revealed parallel diagonal stacking of F0502B on the fibril surface through an intense noncovalent bonding network via inter-ligand interactions. Therefore, [18F]-F0502B is a promising lead compound for imaging aggregated α-Syn in synucleinopathies.

Direct observation of secondary nucleation along the fibril surface of the amyloid β 42 peptide

Alzheimer's disease is a neurodegenerative condition which involves heavy neuronal cell death linked to oligomers formed during the aggregation process of the amyloid β peptide 42 (Aβ42). The aggregation of Aβ42 involves both primary and secondary nucleation. Secondary nucleation dominates the generation of oligomers and involves the formation of new aggregates from monomers on catalytic fibril surfaces. Understanding the molecular mechanism of secondary nucleation may be crucial in developing a targeted cure. Here, the self-seeded aggregation of WT Aβ42 is studied using direct stochastic optical reconstruction microscopy (dSTORM) with separate fluorophores in seed fibrils and monomers. Seeded aggregation proceeds faster than nonseeded reactions because the fibrils act as catalysts. The dSTORM experiments show that monomers grow into relatively large aggregates on fibril surfaces along the length of fibrils before detaching, thus providing a direct observation of secondary nucleation and growth along the sides of fibrils. The experiments were repeated for cross-seeded reactions of the WT Aβ42 monomer with mutant Aβ42 fibrils that do not catalyze the nucleation of WT monomers. While the monomers are observed by dSTORM to interact with noncognate fibril surfaces, we fail to notice any growth along such fibril surfaces. This implies that the failure to nucleate on the cognate seeds is not a lack of monomer association but more likely a lack of structural conversion. Our findings support a templating role for secondary nucleation, which can only take place if the monomers can copy the underlying parent structure without steric clashes or other repulsive interactions between nucleating monomers.

PAP(248-286) Conformational Changes during the Lag Phase of Amyloid Fibril Formation.

The initial stage of fibril formation of C-terminal region PAP(248-286) of human seminal plasma protein prostatic acid phosphatase was considered. Amyloid fibrils from the peptide PAP(248-286) are termed as a semen-derived enhancer of viral infection (SEVI) found in abundant quantities in semen. The kinetics of the amyloid fibril formation process consists of two characteristic phases (lag phase/nucleation phase and growth phase/elongation phase). The lag phase can be caused by the presence of mature amyloid fibrils (seeds) in protein solution, so-called secondary nucleation. The secondary nucleation includes interaction of protein monomers with the mature fibril surface that leads to protein spatial structural changes for further amyloid fibril formation. In this work, changes of the PAP(248-286) spatial structure were obtained during the secondary nucleation phase. Pulsed-field gradient (PFG) NMR was used to characterize the behavior of monomeric PAP(248-286) in water solution after PAP(248-286) seed addition. The self-diffusion coefficient showed compactization of the peptide monomer due to fibril-monomer interactions. PAP(248-286) spatial structural changes were detected with the help of high-resolution NMR spectroscopy and molecular dynamics (MD) simulation. The folding of PAP(248-286) occurs due to backbone chain bending in the region of H270 and T275 amino acid residues. Obtained folded conformation of PAP(248-286) emerging in the secondary nucleation process is energetically favorable and retains after monomer-amyloid interaction. The structural changes are associated with localization of PAP(248-286) hydrophobic surface regions, which are probably responsible for peptide monomer-amyloid interactions.

Conformation-Specific Association of Prion Protein Amyloid Aggregates with Tau Protein Monomers.

Protein aggregation into amyloid fibrils is associated with several amyloidoses, including neurodegenerative Alzheimer's and Parkinson's diseases. Despite years of research and numerous studies, the process is still not fully understood, which significantly impedes the search for cures of amyloid-related disorders. Recently, there has been an increase in reports of amyloidogenic protein cross-interactions during the fibril formation process, which further complicates the already intricate process of amyloid aggregation. One of these reports displayed an interaction involving Tau and prion proteins, which prompted a need for further investigation into the matter. In this work, we generated five populations of conformationally distinct prion protein amyloid fibrils and examined their interaction with Tau proteins. We observed that there was a conformation-specific association between Tau monomers and prion protein fibrils, which increased the aggregate self-association and amyloidophilic dye binding capacity. We also determined that the interaction did not induce the formation of Tau protein amyloid aggregates, but rather caused their electrostatic adsorption to the prion protein fibril surface.

Tendon collagen fibril morphology and nano-mechanics via atomic force microscopy

Due to the hierarchical structure of tendon tissue (fascicles→fibers→fibrils), it is essential to investigate morphology and mechanics at the nano-scopic level to better understand whole body function. Previous studies investigating changes in tendon mechanics after exercise/disease/unloading have focused on the whole tendon and fascicle levels, but limited data exists on adaptations at the collagen fibril level. Objective: Provide a new method to study previously frozen tendon tissue by investigating collagen fibril 1) morphology, 2) nano-mechanical properties, and 3) elasticity maps using atomic force microscopy (AFM). Hypothesis: This method will provide a reliable way to assess tendon structure and function at the nano-scale. Methods: C57BL/6J mouse tendons from NASA Rodent Research-1 (-80°C) were chemically separated and mounted onto glass slides then mechanically separated into tendon subunit sheets and left to air-dry. Collagen fibril morphology was tested with a JPK Nanowizard 4a in tapping mode with a Tap300Al-G cantilever (tip radius=10nm, k=40N/m). Samples were then rehydrated for mechanical testing in Quantitative Imaging (QI) mode with an SNL-10D cantilever (tip radius=2nm, k=0.06N/m). Force data acquisition took place in liquid with a set point of 2nN and Z-speed of 40μm/s. Force-microscopy (FM) and structural data were processed using JPK Data Processing Software and Gwyddion, respectively. Data: Tendon collagen fibrils exhibited uniform D-periods across 38 fibril sections (D-period: 66nm±2.1, diameter: 63nm±23.5). Quantitative analysis of the force curves (n=30) along the highest point of the fibril revealed an average Young’s Modulus (YM) of 2.53MPa±0.31. Elasticity maps (n=3) highlighting the distribution of mechanical properties were generated using FM data. Results Summary: Our tissue preparation protocol combined with AFM reliably determines collagen fibril morphology and nano-mechanical properties of mouse tendons that were previously frozen. As evidence, we present systematic YM within and across different data sets. In addition, the YM values were found to be consistent with previous measurements in tendon tissue under similar conditions. Elasticity maps produced by analysis of FM data indicate the similarity of YM values across the tendon surface. Tendon fibrils were found to have similar D-periodicity despite the variation in fibril size, which is consistent with previous literature. Conclusions: This research provides a new method to test tendon collagen fibril structure and mechanical properties at the nano-scale, presenting a novel analysis (elasticity maps) showing contrast in YM across the fibril surface. Funding: CSUPERB New Investigator Grant to JRB This is the full abstract presented at the American Physiology Summit 2023 meeting and is only available in HTML format. There are no additional versions or additional content available for this abstract. Physiology was not involved in the peer review process.

The Rigid Core and Flexible Surface of Amyloid Fibrils Probed by Magic-Angle-Spinning NMR Spectroscopy of Aromatic Residues.

Aromatic side chains are important reporters of the plasticity of proteins, and often form important contacts in protein-protein interactions. We studied aromatic residues in the two structurally homologous cross-β amyloid fibrils HET-s, and HELLF by employing a specific isotope-labeling approach and magic-angle-spinning NMR. The dynamic behavior of the aromatic residues Phe and Tyr indicates that the hydrophobic amyloid core is rigid, without any sign of "breathing motions" over hundreds of milliseconds at least. Aromatic residues exposed at the fibril surface have a rigid ring axis but undergo ring flips on a variety of time scales from nanoseconds to microseconds. Our approach provides direct insight into hydrophobic-core motions, enabling a better evaluation of the conformational heterogeneity generated from an NMR structural ensemble of such amyloid cross-β architecture.

Der starre Kern und die flexible Oberfläche von Amyloidfibrillen – Magic‐Angle‐Spinning NMR Spektroskopie von aromatischen Resten

AbstractAromatische Seitenketten sind wichtige Indikatoren für die Plastizität von Proteinen und bilden oft entscheidende Kontakte bei Protein‐Protein‐Wechselwirkungen. Wir untersuchten aromatische Reste in den beiden strukturell homologen cross‐β Amyloidfibrillen HET‐s und HELLF mit Hilfe eines spezifischen Ansatzes zur Isotopenmarkierung und Festkörper NMR mit Drehung am magischen Winkel. Das dynamische Verhalten der aromatischen Reste Phe und Tyr deutet darauf hin, dass der hydrophobe Amyloidkern starr ist und keine Anzeichen von “atmenden Bewegungen” auf einer Zeitskala von Hunderten von Millisekunden zeigt. Aromatische Reste, die exponiert an der Fibrillenoberfläche sitzen, haben zwar eine starre Ringachse, weisen aber Ringflips auf verschiedenen Zeitskalen von Nanosekunden bis Mikrosekunden auf. Unser Ansatz bietet einen direkten Einblick in die Bewegungen des hydrophoben Kerns und ermöglicht eine bessere Bewertung der Konformationsheterogenität, die aus einem NMR‐Strukturensemble einer solchen Cross‐β‐Amyloidstruktur hervorgeht.

Morphology-Dependent Interactions between α-Synuclein Monomers and Fibrils.

Amyloid fibrils may adopt different morphologies depending on the solution conditions and the protein sequence. Here, we show that two chemically identical but morphologically distinct α-synuclein fibrils can form under identical conditions. This was observed by nuclear magnetic resonance (NMR), circular dichroism (CD), and fluorescence spectroscopy, as well as by cryo-transmission electron microscopy (cryo-TEM). The results show different surface properties of the two morphologies, A and B. NMR measurements show that monomers interact differently with the different fibril surfaces. Only a small part of the N-terminus of the monomer interacts with the fibril surface of morphology A, compared to a larger part of the monomer for morphology B. Differences in ThT binding seen by fluorescence titrations, and mesoscopic structures seen by cryo-TEM, support the conclusion of the two morphologies having different surface properties. Fibrils of morphology B were found to have lower solubility than A. This indicates that fibrils of morphology B are thermodynamically more stable, implying a chemical potential of fibrils of morphology B that is lower than that of morphology A. Consequently, at prolonged incubation time, fibrils of morphology B remained B, while an initially monomorphic sample of morphology A gradually transformed to B.

Conformational Dynamics of an α-Synuclein Fibril upon Receptor Binding Revealed by Insensitive Nuclei Enhanced by Polarization Transfer-Based Solid-State Nuclear Magnetic Resonance and Cryo-Electron Microscopy.

Many amyloid fibrils associated with neurodegenerative diseases consist of an ordered fibril core (FC) and disordered terminal regions (TRs). The former represents a stable scaffold, while the latter is rather active in binding with various partners. Current structural studies mainly focus on the ordered FC since the high flexibility of TRs hinders structural characterization. Here, by combining insensitive nuclei enhanced by polarization transfer-based 1H-detected solid-state NMR and cryo-EM, we explored the intact structure of an α-syn fibril including both FC and TRs and further studied the conformational dynamics of the fibril upon binding to lymphocyte activation gene 3 (LAG3)─a cell surface receptor that is involved in α-syn fibril transmission in brains. We found that both the N- and C-TRs of α-syn are disordered in free fibrils featuring similar conformation ensembles as those in soluble monomers. While in the presence of the D1 domain of LAG3 (L3D1), the C-TR directly binds to L3D1, meanwhile the N-TR folds into a β-strand and further integrates with the FC, which leads to alteration of the overall fibril structure and surface property. Our work reveals synergistic conformational transition of the intrinsically disordered TRs of α-syn, which sheds light on mechanistic understanding of the essential role of TRs in regulating the structure and pathology of amyloid fibrils.

Evolution of the Cellulose Microfibril through Gamma-Valerolactone-Assisted Co-Solvent and Enzymatic Hydrolysis

Biomass recalcitrance during deconstruction remains a key bottleneck to affordable biomass processing technologies. A clear connection between the cell wall structure and biomass deconstruction is necessary to understand how lignocellulosic material is broken down to valuable monomeric components. Here, we monitor changes in the cellulose microfibril domains of poplar, sorghum, and switchgrass throughout gamma-valerolactone (GVL)–water co-solvent pretreatment and enzymatic hydrolysis using solid-state 13C cross-polarization magic angle spinning nuclear magnetic resonance spectroscopy (CP/MAS 13C-NMR) and wide-angle X-ray scattering (WAXS). Spectral fitting of NMR peaks corresponding to different cellulose microenvironments at the C4 carbon center suggests that a mildly acidic GVL–water co-solvent pretreatment of poplar leads to nearly full removal of xylan–cellulose linkages, which primes the cellulose for enzymatic attack. The spectral fitting also suggests that the pretreatment causes significant depletion of the inaccessible fibril surface domains with an increase in more thermally stable crystalline resonances (Iβ). WAXS confirmed a decrease in the lattice spacing between (200) crystalline planes with increasing co-solvent pretreatment severity. These results are interpreted as an opening of bound microfibril surfaces previously inaccessible to the co-solvent system, which leaves behind a more thermally stable, crystalline domain that is potentially prone to relaxation and recrystallization. Full conversion of residual GVL-pretreated biomass was achieved after the GVL co-solvent pretreatment at 140 °C using a commercial enzyme cocktail, CTec2, which contains different cellulases and other enzymes. Spectral fitting of enzymatically hydrolyzed samples by a single engineered cellulase, CelR, suggests that the residual cellulose recalcitrance is mainly due to the inability of CelR to digest the Iβ crystalline domain present in pretreated samples. This work helps to provide new information regarding the structure of the cell wall and recalcitrance throughout GVL–water mild acidolysis and CelR enzymatic biomass deconstruction by tracking the evolution of structural domains within the cellulose microfibril. This work further directs recommendations for improving the conversion and sugar yields in future studies. Our findings inform inquiry into larger questions of cellulose recalcitrance through GVL pretreatment and CelR enzymatic hydrolysis and give insight into subsequent required steps for full cellulose conversion with attention to the most recalcitrant cellulose structures.

Electroabsorption and Stark Fluorescence Spectroscopies of Thioflavin T.

Thioflavin T (ThT) is a typical fluorescent marker for detecting the formation of amyloid fibrils, because its fluorescence intensity increases by more than 2 orders of magnitude upon complexation with the fibrils. Strong electrostatic fields on protein surfaces are known to be a significant factor in chemical reactions and biological functions. Therefore, ThT bound to amyloid fibrils must experience strong electric fields. This study employed electroabsorption and Stark fluorescence spectroscopies to clarify the effects of external electric fields on the photophysics of ThT. The absorption spectrum shows two bands ascribed to locally excited (LE) and charge transfer (CT) states. Coupling between the LE and CT states is enhanced in the presence of an external electric field, resulting in fluorescence quenching. The electric field strength of the amyloid fibril surface was inferred from the fluorescence quenching efficiency of ThT.

Grass xylan structural variation suggests functional specialization and distinctive interaction with cellulose and lignin.

Xylan is the most abundant non-cellulosic polysaccharide in grass cell walls, and it has important structural roles. The name glucuronoarabinoxylan (GAX) is used to describe this variable hemicellulose. It has a linear backbone of β-1,4-xylose (Xyl) residues that may be substituted with α-1,2-linked (4-O-methyl)-glucuronic acid (GlcA), α-1,3-linked arabinofuranose (Araf), and sometimes acetylation at the O-2 and/or O-3 positions. The role of these substitutions remains unclear, although there is increasing evidence that they affect the way xylan interacts with other cell wall components, particularly cellulose and lignin. Here, we used substitution-dependent endo-xylanase enzymes to investigate the variability of xylan substitution in grass culm cell walls. We show that there are at least three different types of xylan: (i) an arabinoxylan with evenly distributed Araf substitutions without GlcA (AXe); (ii) a glucuronoarabinoxylan with clustered GlcA modifications (GAXc); and (iii) a highly substituted glucuronoarabinoxylan (hsGAX). Immunolocalization of AXe and GAXc in Brachypodium distachyon culms revealed that these xylan types are not restricted to a few cell types but are instead widely detected in Brachypodium cell walls. We hypothesize that there are functionally specialized xylan types within the grass cell wall. The even substitutions of AXe may permit folding and binding on the surface of cellulose fibrils, whereas the more complex substitutions of the other xylans may support a role in the matrix and interaction with other cell wall components.

Deconvoluting binding sites in amyloid nanofibrils using time-resolved spectroscopy.

Steady-state fluorescence spectroscopy has a central role not only for sensing applications, but also in biophysics and imaging. Light switching probes, such as ruthenium dipyridophenazine complexes, have been used to study complex systems such as DNA, RNA, and amyloid fibrils. Nonetheless, steady-state spectroscopy is limited in the kind of information it can provide. In this paper, we use time-resolved spectroscopy for studying binding interactions between amyloid-β fibrillar structures and photoluminescent ligands. Using time-resolved spectroscopy, we demonstrate that ruthenium complexes with a pyrazino phenanthroline derivative can bind to two distinct binding sites on the surface of fibrillar amyloid-β, in contrast with previous studies using steady-state photoluminescence spectroscopy, which only identified one binding site for similar compounds. The second elusive binding site is revealed when deconvoluting the signals from the time-resolved decay traces, allowing the determination of dissociation constants of 3 and 2.2 μM. Molecular dynamic simulations agree with two binding sites on the surface of amyloid-β fibrils. Time-resolved spectroscopy was also used to monitor the aggregation of amyloid-β in real-time. In addition, we show that common polypyridine complexes can bind to amyloid-β also at two different binding sites. Information on how molecules bind to amyloid proteins is important to understand their toxicity and to design potential drugs that bind and quench their deleterious effects. The additional information contained in time-resolved spectroscopy provides a powerful tool not only for studying excited state dynamics but also for sensing and revealing important information about the system including hidden binding sites.

Role of Hydrophobicity at the N-Terminal Region of Aβ42 in Secondary Nucleation.

The self-assembly of the amyloid β 42 (Aβ42) peptide is linked to Alzheimer's disease, and oligomeric intermediates are linked to neuronal cell death during the pathology of the disease. These oligomers are produced prolifically during secondary nucleation, by which the aggregation of monomers is catalyzed on fibril surfaces. Significant progress has been made in understanding the aggregation mechanism of Aβ42; still, a detailed molecular-level understanding of secondary nucleation is lacking. Here, we explore the role of four hydrophobic residues on the unstructured N-terminal region of Aβ42 in secondary nucleation. We create eight mutants with single substitutions at one of the four positions─Ala2, Phe4, Tyr10, and Val12─to decrease the hydrophobicity at respective positions (A2T, A2S, F4A, F4S, Y10A, Y10S, V12A, and V12S) and one mutant (Y10F) to remove the polar nature of Tyr10. Kinetic analyses of aggregation data reveal that the hydrophobicity at the N-terminal region of Aβ42, especially at positions 10 and 12, affects the rate of fibril mass generated via secondary nucleation. Cryo-electron micrographs reveal that most of the mutants with lower hydrophobicity form fibrils that are markedly longer than WT Aβ42, in line with the reduced secondary nucleation rates for these peptides. The dominance of secondary nucleation, however, is still retained in the aggregation mechanism of these mutants because the rate of primary nucleation is even more reduced. This highlights that secondary nucleation is a general phenomenon that is not dependent on any one particular feature of the peptide and is rather robust to sequence perturbations.

Structure-Based Discovery of Small-Molecule Inhibitors of the Autocatalytic Proliferation of α-Synuclein Aggregates.

The presence of amyloid fibrils of α-synuclein is closely associated with Parkinson's disease and related synucleinopathies. It is still very challenging, however, to systematically discover small molecules that prevent the formation of these aberrant aggregates. Here, we describe a structure-based approach to identify small molecules that specifically inhibit the surface-catalyzed secondary nucleation step in the aggregation of α-synuclein by binding to the surface of the amyloid fibrils. The resulting small molecules are screened using a range of kinetic and thermodynamic assays for their ability to bind α-synuclein fibrils and prevent the further generation of α-synuclein oligomers. This study demonstrates that the combination of structure-based and kinetic-based drug discovery methods can lead to the identification of small molecules that selectively inhibit the autocatalytic proliferation of α-synuclein aggregates.