Surface Of Condyle Research Articles

Association between condylar surface computed tomography values in the coronal plane and temporomandibular joint disc position in jaw deformity patients: a retrospective study.

This study aimed to examine the relationship between computed tomography (CT) values of the condylar surface in the coronal plane, condylar morphology and the disc positions in the temporomandibular joint (TMJs) in patients with deformities before and after orthognathic surgery. MATERIALS AND METHODS: The maximum CT values (pixel values) on the condylar surface, condylar thickness, condylar width, condylar angle, condylar height, and joint space were measured. TMJ disc position was classified into five types (anterior type, fully covered type, posterior type, anterior disc displacement with [AW] and without reduction [AWO]), using magnetic resonance imaging (MRI), before and 1 year after surgery. Statistical analysis was performed to assess differences between groups and between the pre- and postoperative values. RESULTS: We enrolled 142 TMJs from 71 female patients diagnosed with jaw deformities. Disc position classification did not change after surgery in all TMJ. Significant differences were observed between anterior displacement (AW and AWO) and other types (fully covered type and posterior type) in the lateral CT value and condylar angle before and 1 year after surgery (P < 0.05). CONCLUSIONS: This study demonstrated a strong relationship between condylar surface CT values in the coronal plane and condylar angle with TMJ disc position classification.

Correlations of temporomandibular joint morphology and position using cone-beam computed tomography and dynamic functional analysis in orthodontic patients: A cross-sectional study.

To correlate temporomandibular joint (TMJ) morphology and position with cone-beam computed tomography (CBCT) images, Joint Vibration Analysis (JVA), and Jaw Tracker (JT) to develop a radiation-free, dynamic method for screening and monitoring the TMJ in orthodontic patients. A total of 236 orthodontic patients without symptoms of TMJ disorders who had undergone CBCT were selected for the JVA and JT tests in this cross-sectional study. TMJ position and morphology were measured using a three-dimensional analysis software. JT measurements involved six opening-closing cycles, and JVA measurements were performed using a metronome to guide the mouth opening-closing movements of the patients. The correlations among the three measuring devices were evaluated. Abnormalities in condylar surface morphology affected the mandibular range of motion. The cut-off value results show that when various measurement groups are within a certain range, abnormalities may be observed in morphology (area under the curve, 0.81; P < 0.001). A 300/< 300 Hz ratio ≥ 0.09 suggested abnormal morphology (P < 0.05). Correlations were observed among the maximum opening velocity, maximum vertical opening position, and joint spaces in the JT measurements. Correlations were also observed between the > 300/< 300 Hz ratio, median frequency, total integral, integral < 300 Hz, and peak frequency with joint spaces in the JVA measurements. JT and JVA may serve as rapid, non-invasive, and radiation-free dynamic diagnostic tools for monitoring and screening TMJ abnormalities before and during orthodontic treatment.

Radiographic and Functional Outcome of Depressed Tibial Plateau Fractures Treated with Raft Plate with Bone Graft – A Prospective Study

Tibial plateau fractures are the fractures that involve the articular surface of the tibial condyles. The Schatzker and OA classifications are the most commonly used to classify these fractures. The Schatzker classification system is a widely recognized method used by orthopedic surgeons to categorize tibial plateau fractures into six distinct types. This classification helps in assessing the initial injury, planning the appropriate management strategy, and predicting the prognosis. Each type represents a different pattern of fracture, which can guide treatment decisions and expectations for recovery. These fractures typically result from the external(valgus) or internal(varus) forces on the knee with axial loading. In younger individuals, tibial plateau fractures are most commonly caused by road traffic accidents due to the high-energy impact. However, in elderly patients with osteopenic bone, even a simple fall can lead to these fractures because their bones are more fragile and susceptible to injury. The tibial plateau fractures are intra-articular fractures of the knee joint and are often difficult to treat and have a high complication rate, including early-onset osteoarthritis. Surgery is the preferred modality of treatment for these fractures, along with bone void fillers to address bone defects caused by the injury. At present, there is no consensus on the optimal method of fixation or the void filling to treat such fractures. Techniques of operative management of tibial plateau fractures have become more successful in achieving and maintaining reduction of the fracture. Still, avoiding malalignment of the limb has been shown to be at least as important as articular congruity to long-term joint viability.

The mechanics of tissue-engineered temporomandibular joint discs: Current status and prospects for enhancement.

The temporomandibular joint (TMJ) disc is an essential protective but vulnerable fibrocartilage. Their high mechanical strength is vital in absorbing loads, reducing friction, and protecting the condylar surface. Many diseases can lead to the destruction or degeneration of the mechanical function of the TMJ disc. Unfortunately, conservative treatment is ineffective in restoring the defective mechanical properties of the discs. Tissue engineering has been investigated as a promising alternative treatment approach to approximate the properties of native tissue. However, it is difficult for tissue-engineered discs to obtain sufficient mechanical properties. Several approaches have been proposed to improve the mechanical properties of tissue-engineered constructs. In this review, we summarized the mechanical properties of native TMJ discs and discussed the current mechanical testing methods. We then summarized the current advances in improving the mechanical properties of TMJ disc tissue-engineered constructs. Moreover, existing challenges and outbreak directions are discussed. This review assists future research in better understanding the mechanical properties of both native and tissue-engineered TMJ discs. It provides new insights into future mechanical property enhancement for TMJ disc tissue engineering.

Analysis of Variation in Sagittal Curvature of the Femoral Condyles.

In designing femoral components, which restore native (i.e., healthy) knee kinematics, the flexion-extension (F-E) axis of the tibiofemoral joint should match that of the native knee. Because the F-E axis is governed by the curvature of the femoral condyles in the sagittal plane, the primary objective was to determine the variation in radii of curvature. Eleven high accuracy three-dimensional (3D) femur models were generated from ultrahigh resolution CT scans. The sagittal profile of each condyle was created. The radii of curvature at 15 deg increments of arc length were determined based on segment circles best-fit to ±15 deg of arc at each increment. Results were standardized to the radius of the best-fit overall circle to 15 deg-105 deg for the femoral condyle having a radius closest to the mean radius. Medial and lateral femoral condyles exhibited multiradius of curvature sagittal profiles where the radius decreased at 30 deg flexion by 10 mm and at 15 deg flexion by 8 mm, respectively. On either side of the decrease, radii of segment circles were relatively constant. Beyond the transition angles where the radii decreased, the anterior-posterior (A-P) positions of the centers of curvature varied 4.8 mm and 2.3 mm for the medial and lateral condyles, respectively. A two-radius of curvature profile approximates the radii of curvature of both native femoral condyles, but the transition angles differ with the transition angle of the medial femoral condyle occurring about 15 deg later in flexion. Owing to variation in A-P positions of centers of curvature, the F-E axis is not strictly fixed in the femur.

Dissolving magnesium hydroxide implants enhance mainly cancellous bone formation whereas degrading RS66 implants lead to prominent periosteal bone formation in rabbits

Bone fractures often require internal fixation using plates or screws. Normally, these devices are made of permanent metals like titanium providing necessary strength and biocompatibility. However, they can also cause long-term complications and may require removal. An interesting alternative are biocompatible degradable devices, which provide sufficient initial strength and then degrade gradually. Among other materials, biodegradable magnesium alloys have been developed for craniofacial and orthopaedic applications. Previously, we tested implants made of magnesium hydroxide and RS66, a strong and ductile ZK60-based alloy, with respect to biocompatibility and degradation behaviour. Here, we compare the effects of dissolving magnesium hydroxide and RS66 cylinders on bone regeneration and bone growth in rabbit condyles using microtomographical and histological analysis. Both magnesium hydroxide and RS66 induced a considerable osteoblastic activity leading to distinct but different spatio-temporal patterns of cancellous and periosteal bone growth. Dissolving RS66 implants induced a prominent periosteal bone formation on the medial surface of the original condyle whereas dissolving magnesium hydroxide implants enhance mainly cancellous bone formation. Especially periosteal bone formation was completed after 6 and 8 weeks, respectively. The observed bone promoting functions are in line with previous reports of magnesium stimulating cancellous and periosteal bone growth and possible underlying signalling mechanisms are discussed. Statement of significanceBiodegradable magnesium based implants are promising candidates for use in orthopedic and traumatic surgery. Although these implants are in the scientific focus for a long time, comparatively little is known about the interactions between degrading magnesium and the biological environment. In this work, we investigated the effects of two degrading cylindrical magnesium implants (MgOH2 and RS66) both on bone regeneration and on bone growth. Both MgOH2 and RS66 induce remarkable osteoblastic activities, however with different spatio-temporal patterns regarding cancellous and periosteal bone growth. We hypothesize that degradation products do not diffuse directionless away, but are transported by the restored blood flow in specific spatial patterns which is also dependent on the used surgical technique.

Comparison of occlusal dental wear and degenerative alterations of the temporomandibular joint in two medieval populations from Central Europe

AbstractOsteoarthritis (OA) is a degenerative joint disease commonly identified in archaeological human remains. This condition primarily affects stress‐bearing joints, which include the temporomandibular joints (TMJs). Comparing dental status and degenerative alterations of the TMJs of individuals is crucial for understanding the role of the former in increasing predisposition to temporomandibular OA. The combination of visual and radiologic observations allows for a more in‐depth assessment of TMJ‐OA in archaeological specimens. A comparative study between tooth wear and the extent of degenerative signs on mandibular condylar surfaces was conducted on individuals from two medieval cemeteries in central Europe (Früebergstrasse in Baar and Dalheim). OA, tooth wear, and AMTL were evaluated in 41 individuals comprising both adult specimens as well as those of a more advanced age. Condylar OA was diagnosed in 14 individuals (Baar, n = 7; Dalheim, n = 7). No specific sex predisposition for OA in TMJs was found in the study's sample. Tooth wear was more severe in individuals with condyles affected by OA than in individuals whose condyles showed no degenerative signs. Although dental occlusion could not be evaluated, tooth wear values seem to point to diverse mastication patterns when there is unilateral or bilateral manifestation of mandibular OA in the two medieval populations under study.

Identifying iliotibial band graft length and incision site may minimise the potential risk of harming adjacent structures: A novel approach for surgeon guidance.

The Iliotibial band (ITB) is a fibrous thickening of the fascia lata originating at the iliac crest and inserting at Gerdy's tubercle on the lateral tibia. The ITB significantly contributes to lateral knee stabilisation. Due to its size, tensile strength and easy access, it is widely used in orthopaedic surgery as an autograft during reconstruction procedures. Although ITB harvesting may result in complications, such as reduced knee extension or hip flexion, no safety margins or guidelines have been proposed for the procedure. Our aim was to determine the maximal safe length of an ITB graft, that is, that does not harm the lateral collateral ligament (LCL), tensor fasciae latae (TFL), gluteus maximus (GM) or adjacent structures, and reduce the complication rate. The study included 50 lower limbs of 25 human cadavers, previously fixed in 10% formalin solution. The inclusion criterion was the lack of visible signs of surgical interventions in the study region. Forty lower limbs were included in the study: 16 female (mean age 83.1 ± 3.4 years) and 24 male (mean age 84.2 ± 6.8 years). Dissection was performed with a previously established protocol. Morphometric measurements were then obtained twice by two researchers. The mean femur length was 404.8 mm [female (F) = 397.3 mm, male (M) = 409.9 mm, standard deviation (SD): F = 23.8 mm, M = 24.1 mm]. The mean ITB length was 318.9 mm (F = 309.4 mm, M = 325.2 mm, SD: F = 25.7 mm, M = 33.7 mm). Longer femurs were associated with longer ITB (p < 0.05). The mean distance from the insertion of the GM to the myofascial junction of TFL and ITB was 34.6 mm (F = 34.5 mm, M = 34.6 mm, SD: F = 3.2 mm, M = 3.3 mm). The longer femurs or ITBs demonstrated a greater distance from GM insertion to the myofascial junction of the TFL and ITB (p < 0.05). ITB grafts longer than 21 cm may contribute to the greater risk of TFL rupture. Based on simple measurements of the femur length, the surgeon may assess approximate ITB length, and thus assess the length of the maximal graft length. Moreover, to avoid harming the LCL, the incision should be performed 5 cm proximal to the articular surface of the lateral femoral condyle or 13 mm proximal to the lateral femoral epicondyle. Such preparation and preoperative planning may greatly reduce the risk of complications during ITB harvesting, while performing, for instance, the over-the-top technique for anterior cruciate ligament reconstruction in skeletally immature patients. Basic I.

Strong Correlation Between Femoral Condyle Radius of Curvature and Anterior-Posterior Length

Background: The radius of curvature (ROC) of the femoral condyle is a factor in potential cartilage incongruities following osteochondral allograft (OCA) transplantation. Accurate restoration of the chondral surface may be achievable by using “best-fit” donor-recipient matching based on linear femorotibial dimensions, such as the femoral condyle anterior-posterior length (APL), femoral condyle width (lateral-medial length, LML), femoral hemicondyle width (HCW), and tibial plateau width (TPW), particularly if they correlate well with the ROC. This study aimed to investigate the correlative relationship between femorotibial dimensions and the ROC. Methods: Computed tomography (CT) scans from 49 patients (31 men 28 ± 10 years old and 18 women 27 ± 6 years old) were analyzed. Axial images were used for APL and LML measurements, while coronal images were used for HCW and TPW. True sagittal images of the medial femoral condyle (MFC) and lateral femoral condyle (LFC) were used to calculate their individual ROCs by determining the best-fit circles along the condylar surface. Linear regression models were used to determine the relationship between the femorotibial dimensions and ROC. Measurements were repeated for a randomly selected subset of the data, and intraclass correlation coefficients (ICCs) were calculated to investigate intra- and interobserver reliability. Results: All femorotibial dimensions showed significant correlations with the MFC and LFC ROCs (p &lt; 0.01). The ROC correlations with femorotibial dimensions were found to be in the following descending order: APL (R2 ≥ 0.83), LML (R2 ≥ 0.52), TPW (R2 ≥ 0.36), and HCW (R2 ≥ 0.27). The intra- and interobserver reliabilities for the APL (ICC &gt; 0.98) and ROC (ICC &gt; 0.94) were excellent. Conclusions: The ROC was strongly correlated with the APL of the MFC and LFC. Donor-recipient APL matching in OCA transplantation may provide a level of matching similar to that achievable by direct ROC measurements. Clinical Relevance: Determining the most predictive femorotibial dimension for ROC restoration in the OCA matching process may improve clinical outcomes, particularly for patients with large osteochondral lesions.

Comprehensive 3-dimensional Positional and Morphological Analyses of Condyle and Glenoid Fossa in Patients with Skeletal Class II Malocclusion following Bimaxillary Orthognathic Surgery.

This study aimed to comprehensively and quantitatively characterize 3-dimensional (3D) positional and morphological changes of the condyle and glenoid fossa in patients with skeletal Class II malocclusion treated with bimaxillary orthognathic surgery. Twenty eligible patients treated at our institution from January 2016 to December 2021 with more than 12 months of postoperative follow-up were retrospectively enrolled. Radiographic data of cone-beam computed tomography (CBCT) for each patient were collected at 3 stages: 1 week preoperatively (T0), immediately after surgery (T1), and at least 12 months postoperatively (T2). Positional changes, surface and volumetric alterations of condyle, and bone remodeling in glenoid fossa were measured and compared based on voxel- and surface registrations in visual 3D methods. Most patients exhibited a tendency for condyles to shift posteriorly, laterally, superiorly, and rotated outward, downward, and forward immediately after surgery. Posterior, medial, superior movement and outward, upward, and backward rotation of condyles were observed during follow-up (T1-T2). Bone resorption frequently occurred in the posterior area of condylar surfaces, while bone remodeling was more common in the anterior region of the glenoid fossa. Reduced volume of the condyle was found in most cases, which was not associated with the amount of mandibular advancement. Overall, the condyle and its corresponding glenoid fossa remained relatively stable during the follow-up. Our results reveal positional and morphological alterations in the condyle and the glenoid fossa after bimaxillary orthognathic surgery in patients with skeletal class II malocclusion. These changes predominantly fall within the spectrum of physical adaption.

Case report of a new technique for with posterior cruciate ligament avulsion fractures treated with a mini transverse incision

Posterior cruciate ligament (PCL) is a strong stabilising ligament of the knee joint originating from posterior part of Intercondylar eminence oof tibia and attaches to the anterior part of medial surface of lateral condyle of femur. The PCL plays a major role in knee stabilization, and are statistically one of the rarest injuries around the knee. Due to the surrounding neurovascular elements in the popliteal space, very few open approaches to repair such injury were performed. The ‘‘safe transverse mini-incision approach’’ to PCL avulsion fracture is a simple approach, does not require exploration of the neurovascular elements, and produced satisfactory results in the majority of patients.

Does adjunctive fixation in conjunction with miniplate affect condylar position and morphology after mandibular advancement through bilateral sagittal split ramus osteotomy? A retrospective 3-dimensional CT comparative study

To minimize condylar positional and morphological changes after mandibular advancement through bilateral sagittal split ramus osteotomy (BSSRO), surgeons add either a bicortical screw or a two-hole plate distal to the conventional single miniplate. Since there have been no previous studies investigating the effect of this combination, our study aimed to evaluate the short- and long-term effects of these adjunctive fixation methods (AFM) on condylar positional and morphological changes after mandibular advancement through BSSRO.This retrospective cohort study included consecutive patients with retruded mandibles who were treated in the Department of Orthognathic and TMJ Surgery at West China Hospital of Stomatology, Sichuan University. The patients were divided into two groups based on the primary predictor variable, which was the addition of AFM — either a single bicortical screw or a two-hole plate in addition to the single miniplate. The primary outcome variable was the condylar positional and morphological changes after mandibular advancement through BSSRO. Three-dimensional facial CT scans were obtained at three different time points (preoperatively — T0, 1 week postoperatively — T1, and 1 year postoperatively — T2) and analyzed using ITK-SNAP, 3D Slicer, and SlicerSALT software. Intergroup comparisons were conducted with an independent t-test, with a p-value of <0.05 considered significant. Correlations between the variables were estimated by Pearson correlation. The study comprised 51 patients (32 females, 19 males; mean age 25.13 ± 4.24 years), involving a total of 81 condyles (21 unilateral and 60 bilateral).There was a significant difference in long-term condylar displacement in favor of AFM along with a single miniplate (p < 0.001). The bicortical screw group recorded less condylar displacement than the two-hole plate group horizontally (0.11 mm vs 0.22 mm) and sagittally (0.03 mm vs 0.17 mm), but more vertically (0.85 mm vs 0.03 mm). Bone formation associated with AFM occurred on all condylar surfaces, compared with only three surfaces in the single miniplate group.The adjunctive method in addition to the single miniplate fixation method showed less condylar displacement and more bone apposition after mandibular advancement through BSSRO. The follow-up duration variable was the only significant determinant for volumetric changes in the condyle.

Degenerative Temporomandibular Disorders: An Assessment of Bone Trabecular Structure Using Fractal Analysis in Digital Panoramic Radiographs.

Introduction Fractal analysis has proved to be a salient tool to quantitatively assess the qualitative changes in the bone trabeculae of patients with hyperparathyroidism, osteoporosis, and various temporomandibular disorders, including osteoarthritis (OA) and rheumatoid arthritis of temporomandibular joint (TMJ), in several previous studies. The purpose of this study was to use fractal analysis to assess alterations in the trabecular pattern of the mandibular condyle in patients with degenerative temporomandibular disorders. Materials and methods This study comprised 98 subjects with 49 subjects in the study group and 49 subjects in the control group, aged 18-50 years. Age and sex in the control group were matched to those in the case group. The subjects were assessed clinically with the Diagnostic Criteria for Temporomandibular Disorders. Digital panoramic X-ray equipment with set parameters of 70 kvp, 8 mA, and 16-second exposure duration was used to take panoramic radiographs. Fractal analysis was done and the calculated fractal dimension value was obtained usingImageJ version 1.48 software (National Institutes of Health, Bethesda, MD). The same observer used Muir and Goss's method to rate the total degenerative changes in the condylar surfaces, which were substantiated by the calculated fractal dimension value. The data were statistically analyzed. Results The results revealed a significant difference (p-value = 0.041) between the mean fractal valuein the case group's (1.35) and the control group's (1.38) left sides whereas the differences in the mean fractal values between the case and control groups on the right side was not significant (p-value = 0.49). Conclusion It is recommended to use the fractal dimension value and the total degenerative severity score together to quantify degenerative changes in the TMJ OA rather than exclusively relying on fractal value.

On the feasibility of minimally invasive Le Fort I with patient-specific implants: Proof of concept

A novel approach to Le Fort I osteotomy is presented, integrating patient-specific implants (PSIs), osteosynthesis and cutting guides within a minimally invasive surgical framework, and the accuracy of the procedure is assessed through 3D voxel-based superimposition. The technique was applied in 5 cases. Differences between the surgical plan and final outcome were evaluated as follows: a 2-mm color scale was established to assess the anterior surfaces of the maxilla, mandible and chin, as well as the condylar surfaces. Measurements were made at 8 specific landmarks, and all of them showed a mean difference of less than 1 mm. In conclusion, the described protocol allows for minimally invasive Le Fort I osteotomy using PSIs. Besides, although the accuracy of the results may be limited by the small sample size, the findings are consistent with those reported in the literature. A prospective comparative study is needed to obtain statistically significant results and draw meaningful conclusions.

Comparative analysis of temporomandibular joint morphology in degenerative joint disease: A cone-beam CT study in patients with and without arthralgia

ObjectivesThis cross-sectional study aimed to compare, by using Cone-Beam Computed Tomography (CBCT), temporomandibular joint (TMJ) morphology among patients with degenerative joint disease (DJD) with or without arthralgia, as well as a control group. Methods: Thirty-one patients and their respective CBCT TMJ exams were assessed. These individuals were selected from an Orofacial Pain Service and classified into three groups based on the Diagnostic Criteria for Temporomandibular Disorders (DC/TMD): group 1 (10 patients with TMJ DJD and arthralgia), group 2 (11 patients with TMJ DJD without pain), and group 3 (the control group, consisting of 10 healthy individuals without any signs or symptoms of TMD). A second examiner, who was calibrated and blinded for the patient's diagnosis, evaluated the CBCT images. Results: Group 1 showed a statistically significant association with the variables of erosion (p = 0.003) and osteophyte (p = 0.04) on the condyle surface, as well as concentric condyle position with reduced joint space (p = 0.01). The Kappa concordance index between the clinical diagnosis of DC/TMD and CBCT images was k = 0.134 (p ≤ 0.001). Conclusion: The presence of erosion, osteophyte, and concentric condyle position with reduced joint space was statistically associated with DJD and ongoing TMJ joint pain.

Mechanical Influence of Edentulous Mandibular Morphology on Peri-implant Bone in Implant Prosthetics: Threedimensional Finite Element Analysis.

The purpose of this study was to examine the mechanical influence of edentulous mandibular morphology on peri-implant bone in implant prosthetics by finite element analysis. Computed tomographic data from 25 patients with edentulous mandibles were selected and the radius of mandibular curvature and the height of the mandible at the midline were measured in order to clarify the morphological characteristics of the mandible. From the measurement, two patients with the smallest and largest radii of the mandible were selected. Two types of three-dimensional finite element models consisting of the edentulous mandible (small and large radius), superstructure (a cantilever bridge), implants, and abutments were created. Four implants were inserted between the right and left mental foramina. The upper surface of the mandibular condyle was constrained, and a vertical load of 100 N was applied on the occlusal surface of the right first molar. Three-dimensional finite element analysis of each model was performed to examine the mechanical influence of the edentulous mandibular morphology on the peri-implant bone. Measurement of mandibular morphology in CT images indicated that the lower the mandibular height was, the larger was the radius of the anterior mandibular curvature. Finite element analysis revealed that a higher equivalent stress was generated in the peri-implant bone of the model with a larger radius of curvature than that of the model with a smaller radius of curvature. The highest equivalent stress in the mandible was generated in the distal margin of the peri-implant bone posterior to the loaded side of the large radius of curvature model. The mandibular morphology had a mechanical influence on the peri-implant bone.

Exposure of Hoffa Fractures Is Improved by Posterolateral and Posteromedial Extensile Approaches: A Qualitative and Quantitative Anatomical Study.

The current literature lacks recommendations regarding surgical approaches to best visualize and reduce Hoffa fractures. The aims of this study were to (1) define surgical corridors to the posterior portions of the lateral and medial femoral condyles and (2) compare the articular surface areas visible with different approaches. Eight fresh-frozen human cadaveric knees (6 male and 2 female donors; mean age, 68.2 ± 10.2 years) underwent dissection simulating 6 surgical approaches to the distal femur. The visible articular surface areas for each approach were marked using an electrocautery device and subsequently analyzed using image-processing software. The labeled areas of each femoral condyle were statistically compared. At 30° of flexion, visualization of the posterior portions of the lateral and medial femoral condyles was not possible by lateral and medial parapatellar approaches, as only the anterior 29.4% ± 2.1% of the lateral femoral condyle and 25.6% ± 2.8% of the medial condyle were exposed. Visualization of the lateral femoral condyle was limited by the posterolateral ligamentous structures, hence a posterolateral approach only exposed its central (13.1% ± 1.3%) and posterior (12.4% ± 1.1%) portions. Posterolateral extension by an osteotomy of the lateral femoral epicondyle significantly improved the exposure to 53.4% ± 2.7% and, when combined with a Gerdy's tubercle osteotomy, to 70.9% ± 4.1% (p < 0.001). For the posteromedial approach, an arthrotomy between the anteromedial retinaculum and the superficial medial collateral ligament, and one between the posterior oblique ligament and the medial gastrocnemius tendon, allowed visualization of the central (13.5% ± 2.2%) and the posterior (14.6% ± 2.3%) portions of the medial femoral condyle, while a medial femoral epicondyle osteotomy significantly improved visualization to 66.1% ± 5.5% (p < 0.001). Visualization of the posterior portions of the femoral condyles is limited by the specific anatomy of each surgical corridor. Extension by osteotomy of the femoral epicondyles and Gerdy's tubercle significantly improved articular surface exposure of the femoral condyles. Knowledge of the surgical approach-specific visualization of the articular surface of the femoral condyles might be helpful to properly reduce small Hoffa fragments.

Association of Stability and Size of Unhealed Area With Failure After Internal Fixation for Osteochondritis Dissecans Lesions of the Knee: Radiological Evaluation Using Computed Tomography

Background: Open reduction and internal fixation (ORIF) has been widely performed because the osteochondral component of the osteochondritis dissecans (OCD) lesion is the most suitable for reconstructing the joint structure. Purpose: To evaluate radiological healing in terms of reconstructed bony structure after ORIF with bone graft by computed tomography (CT), to identify preoperative prognostic factors for failure, and to determine the cutoff value of radiological healing for risk of failure. Study Design: Case-control study; Level of evidence, 3. Methods: A retrospective cohort study of 42 patients (44 knees) who underwent internal fixation with bone graft for OCD lesions of the knee from 2004 to 2018 was conducted. All patients were evaluated 6 months postoperatively, and if not healed 6 months after surgery, they were evaluated by CT periodically thereafter. Radiological healing was judged according to the following 3 criteria: (1) reossification of the OCD lesion, (2) bony continuity between the OCD lesion and basal floor, and (3) reconstructed bony surface of the femoral condyle reconstructed to match the normal joint. Then, the percentage of the radiological healing area was calculated as the ratio of the healing length to the total lesion length. The nonhealing area was calculated by multiplying the sum of the total nonhealing length. Clinical failure was defined as any definitive reoperation for the same OCD lesion, such as fragment excision, or a cartilage restoration procedure. After 6 months, all eligible patients underwent arthroscopy to check for protrusion of the absorbable pin into the joint; the removal of an absorbable pin protruding into the joint was not considered a failure. Results: Clinical failure was recorded for 4 cases (9.1%). The mean overall percentage of the radiological healing area of OCD 6 months after ORIF with bone graft was 79.5% ± 24.4%, and the mean overall nonhealing area at 6 months was 87.8 ± 107.9 mm2. The percentages of radiological healing area of stable (International Cartilage Regeneration & Joint Preservation Society OCD II) lesions and femoral condylar (lateral femoral condyle + medial femoral condyle) lesions were significantly lower than unstable lesions and femoral groove lesions, respectively (P = .01 and P = .03, respectively). On receiver operating characteristic curve analysis, the cutoff points for predicting a significantly increased risk of failure were 33.9% (sensitivity, 100%; specificity, 100%; area under the curve, 1) for the percentage of radiological healing area and 222.9 mm2 (sensitivity, 95%; specificity, 100%; area under the curve, 0.956) for the nonhealing area 6 months postoperatively. Conclusion: A stable lesion and a femoral condylar lesion were the predictors of poor radiological healing on CT images 6 months after ORIF with bone graft. The risk of failure was increased significantly in cases with only approximately one-third of the lesion healed or in cases with large nonhealing areas at 6 months postoperatively.

Rim plate fixation for a rare fracture pattern of the lateral femoral condyle: A case report.

Osteochondral fractures of the lateral femoral condyle caused by lateral patella dislocation have been rarely reported. The AO/OTA Classification is not suitable for this uncommon injury. Comminution of the anterior cartilage surface of the lateral condyle with bone impaction is challenging to reduce and repair accurately, leading to uncertainty in joint function recovery. The treatment for this rare fracture is not commonly reported. We, herein, report a unique case where the lateral condyle osteochondral fracture occurred alongside patellar dislocation and instability of the patellofemoral joint. Autogenous bone grafting, open reduction, and internal fixation with a rim plate resulted in a satisfactory outcome.

Arthroscopic Electromechanical Assessment of Human Articular Cartilage Injury Correlates with ICRS Scores.

This study aimed to conduct arthroscopic evaluation of cartilage electromechanical properties and establish their correlation with International Cartilage Repair Society (ICRS) grading scores. In 18 patients, quantitative parameter (QP) measurements were taken on the weight-bearing surface of the medial femoral condyle. Adjacently, the same site was graded using ICRS scores (0-4). Electromechanical QPs for ICRS grades 0 to 3 were obtained during arthroscopy, while complete grade 4 injuries were assessed using femur cartilage-bone blocks from knee arthroplasty. The QP values for ICRS grades 0 to 2 were compared with grades 3 and 4 using Welch t test. The corresponding QP values were assigned to ICRS grades 0 to 4 and compared using Welch ANOVA (analysis of variance). Pearson's coefficient evaluated QP-ICRS grade relationship. Healthy grade 0 cartilage displayed a mean QP value of 10.5 (±2.8 SD, n = 4). The ICRS grade 1 and grade 2 injuries were associated with QP values of 12 (±0.7, n = 2) and 13.25 (±1.77, n = 2), respectively. The grade 3 defects had QP values of 20.43 (±4.84, n = 4), whereas complete grade 4 defects showed electromechanical values of 30.17 (±2.19, n = 6). Significant differences in QP values were observed between ICRS grades 0 to 2 (mean QP 11.56 ± 2.3, n = 8) and grades 3 and 4 (26.27 ± 6, n = 10; P < 0.0001). Pearson's correlation coefficient of 0.9 indicated a strong association between higher ICRS cartilage injury grades and elevated QP values (P < 0.0001). Arthroscopic electromechanical QP assessment robustly correlates with ICRS scores. The QP values for ICRS grades 0 to 2 are significantly lower, compared with grades 3 and 4.