Surface Level Research Articles

Comprehensive theoretical study of the effects of facet, oxygen vacancies, and surface strain on iron and cobalt impurities in different surfaces of anatase TiO2.

We report the results of systematic ab initio modelling of various configurations of iron and cobalt impurities embedded in the (110), (101), and (100) surfaces of anatase TiO2, with and without oxygen vacancies. The simulation results demonstrate that incorporation into interstitial voids at the surface level is significantly more favourable than other configurations for both iron and cobalt. The calculations also demonstrate the crucial effect of the facet as well as the lesser effects of other factors, such as vacancies and strain on the energetics of defect incorporation, magnetic moment, bandgap, and catalytic performance. It is further shown that there is no tendency towards the segregation or clustering of impurities on the surface. The calculated free energies of the hydrogen evolution reaction in acidic media predict that iron impurities embedded in the (101) surface of anatase TiO2 can be a competitive catalyst for this reaction.

Numerical simulation of the stress-strain state near the injection well at deep disposal facilities for liquid radioactive waste

Relevance. The need to predict deformations of the earth's surface near injection wells pumping liquid radioactive waste, as well as their stability when pressure changes in the well during injection. Aim. To perform a numerical analysis of the stress-strain state of the structural elements of the injection well and the surrounding rock mass using the finite element method, to determine the magnitude of the deformations of the earth's surface and define the stability of the well and the strength of the cement stone at the maximum injection pressure of liquid radioactive waste. Objects. Near-wellbore zone of one of the injection wells located at the liquid radioactive waste injection site. Methods. Numerical finite element method for calculating the stress-strain state of the near-wellbore zone, taking into account the distribution of the elastic properties of rocks along the simulated section and the main structural elements of the well. Results. The authors have developed the numerical finite element scheme of one of the injection wells, taking into account its main structural elements, as well as allowing you to set the pressure distribution within the exploited horizon during the injection of waste. In the model, the distribution of the elastic properties of rocks along the section was set, taking into account their lithological features. The authors carried out the analysis of the hydrodynamic parameters of the well operation and determined the maximum pressure at the wellhead during the injection of liquid radioactive waste, equal to 1.71 MPa. Numerical modeling of the stress-strain state of the near-wellbore zone was performed in two stages: for the conditions of an idle well and taking into account the pressure distribution at the maximum waste injection pressure. The distribution of vertical displacements at the level of the earth's surface, as well as at the top of the operational horizon at the maximum pressure of liquid radioactive waste injection, is obtained. It is shown that at such a pressure, the largest uplifts will be: on the earth's surface – 4.5 cm, on the top of the production horizon – 11 cm. An assessment of the stability of the well structural elements at a maximum waste injection depth of 280 m, corresponding to the maximum pressure, showed that the stresses in the well and cement stone are much lower than the values that can lead to their violation. For cement stone, the safety factor at a maximum pressure of 1.71 MPa was equal to 7.8.

Integrated Anomaly Detection and Early Warning System for Forest Fires in the Odisha Region

The present study aims to develop a random forest algorithm-based classifier to predict the occurrence of fire events using observed meteorological parameters a day in advance. We considered the skin temperature, the air temperature close to the surface, the humidity close to the surface level, and soil moisture as important meteorological factors influencing forest fire occurrence. Twenty additional parameters were derived based on these four parameters that account for the energy exchanged in sensible and latent forms and the change in parameters in recent trends. We used the mutual information approach to identify critical meteorological parameters that carry significant information about fire occurrence the next day. The top nine parameters were then fed as input to the random forest algorithm to predict fire/no fire the next day. The weighted data sampling and SMOTE techniques were employed to address the class imbalance in the fire data class. Both techniques correctly classified fire incidents well, given the meteorological input from the previous days. This study also showed that as the class imbalance increases to 1:9, the performance based on the precision, recall, F1 score, and accuracy are maximum, showing the model’s ability to perform with class imbalance. Both techniques helped the random forest algorithm forecast fire instances as the data sample size increased.

Characterizing surface pressure and wind fields of typhoons approaching Hong Kong

In this paper, 17 severe typhoons that have affected Hong Kong are simulated using an advanced numerical atmospheric simulation system - Weather Research and Forecasting model (WRF). The simulated surface pressure and wind fields of these typhoons are validated against a wide range of field observations. Then azimuth-dependent models for the radius of maximum winds and the Holland parameter are established statistically at the surface level. It is observed that the shape parameter of the Holland pressure model is smaller at the surface than that at the gradient level. And the Holland wind field model cannot well reproduce the simulated radial wind profiles due to the complexities of nonuniform surface conditions and typhoon dynamics. It is found that the modified Rankine model provides satisfactory estimates of typhoon wind speeds in Hong Kong. Additionally, wind field asymmetries of typhoons approaching Hong Kong are highly correlated with the typhoon track velocity, vertical wind shear and the angle between them. The proposed statistical models and identified characteristics of wind field asymmetries of typhoons will provide useful information for rapidly assessing typhoon wind hazards.

Bimolecular Passivation-Dipole Bridge for Highly Efficient Inverted Perovskite Solar Cells with Low Nonradiative Recombination Loss.

Constructing charge-selective heterointerface with minimized defect state and matched energy level alignment is essential to reduce nonradiative recombination for achieving high-performance perovskite solar cells (PSCs). Herein, a bimolecular passivation-dipole bridge comprised of sodium phenylmethanesulfonate (SPM) and 2-phenylethylammonium iodide (PEAI) is carefully developed to regulate perovskite heterointerface. SPM passivates defect states and upshifts Fermi level (EF) of perovskite surface, and subsequent PEAI further induces additional negative dipole and causes the surface EF of perovskite pinning to negative polaron transport state of electron transport layer PCBM, which significantly promotes electron extraction at the perovskite electron-selective contact. These advantages are confirmed by a remarkably improved efficiency from 21.74% for control to 25.12% for treated PSC with excellent stability. Moreover, corresponding nonradiative recombination loss impressively diminishes from 123 to 70 meV, and charge transport-induced fill factor loss is only 3.00%. This work provides a promising approach via passivation-energetic synergy for engineering perovskite heterointerface toward highly efficient and stable PSCs.

Modelling Marine Heatwaves Impact on Shallow and Upper Mesophotic Tropical Coral Reefs

Abstract Coral reefs ecosystems, often compared to rain forests for their high biodiversity, are threatened by ocean warming causing coral bleaching when the symbiotic relationship between dinoflagellates and corals breaks under high ocean temperatures. Thermal stress from marine heatwaves occur both at the surface and subsurface with subsurface marine heatwaves lasting longer with potentially higher cumulative intensities. However, global coral bleaching models generally ignore the differences in thermal stress between surface and sea-bed levels. Here, we define marine heatwaves at sea-bed level to model coral bleaching with daily resolution from May 6th 1993 to December 31st 2023, for 9944 tropical coral reefs between 0 and 50m depths. We show that deeper reefs experience on average higher thermal stress and bleaching compared to surface reefs. Using surface temperature data to model bleaching for deeper corals underestimates bleaching intensities by an average of 6 ± 9% compared to the subsurface calibrated model. Our study is a starting point for more accurate coral bleaching modelling, providing additional evidence to reshape our perception of deeper coral reefs as potential refugees from climate change. 

Salmonella Typhimurium infection inhibits macrophage IFNβ signaling in a TLR4-dependent manner.

Type I Interferons (IFNs) generally have a protective role during viral infections, but their function during bacterial infections is dependent on the bacterial species. Legionella pneumophila, Shigella sonnei and Mycobacterium tuberculosis can inhibit type I IFN signaling. Here we examined the role of type I IFN, specifically IFNβ, in the context of Salmonella enterica serovar Typhimurium (STm) macrophage infections and the capacity of STm to inhibit type I IFN signaling. We demonstrate that IFNβ has no effect on the intracellular growth of STm in infected bone marrow derived macrophages (BMDMs) derived from C57BL/6 mice. STm infection inhibits IFNβ signaling but not IFNγ signaling in a murine macrophage cell line. We show that this inhibition is independent of the type III and type VI secretion systems expressed by STm and is also independent of bacterial phagocytosis. The inhibition is Toll-like receptor 4 (TLR4)-dependent as the TLR4 ligand, lipopolysaccharide (LPS), alone is sufficient to inhibit IFNβ-mediated signaling. Cells downregulated their surface levels of IFNα/β receptor 1 (IFNAR1) in response to LPS, which may be mediating our observed inhibition. Lastly, we examined this inhibition in the context of TLR4-deficient BMDMs as well as TLR4 RNA interference and we observed a loss of inhibition with LPS stimulation as well as STm infection. In summary, we show that macrophages exposed to STm have reduced IFNβ signaling via crosstalk with TLR4 signaling, which may be mediated by reduced host cell surface IFNAR1, and that IFNβ signaling does not affect cell-autonomous host defense against STm.

Palmitoylation regulates norepinephrine transporter uptake, surface localization, and total expression with pathogenic implications in postural orthostatic tachycardia syndrome.

Postural orthostatic tachycardia syndrome (POTS) is an adrenergic signaling disorder characterized by excessive plasma norepinephrine, postural tachycardia, and syncope. The norepinephrine transporter (NET) modulates adrenergic homeostasis via the reuptake of extracellular catecholamines and is implicated in the pathogenesis of adrenergic and neurological disorders. In this study, we reveal NET is palmitoylated in male Sprague-Dawley rats and Lilly Laboratory Cell Porcine Kidney (LLC-PK1) cells. S-palmitoylation, or the addition of a 16-carbon saturated fatty acid, is a reversible post-translational modification responsible for the regulation of numerous biological mechanisms. We found that LLC-PK1 NET is dynamically palmitoylated, and that inhibition with the palmitoyl acyltransferase (DHHC) inhibitor, 2-bromopalmitate (2BP) results in decreased NET palmitoylation within 90 min of treatment. This result was followed closely by a reduction in transport capacity, cell surface, and total cellular NET expression after 120 min of treatment. Increasing 2BP concentrations and treatment time revealed a nearly complete loss of total NET protein. Co-expression with individual DHHCs revealed a single DHHC enzyme, DHHC1, promoted wild-type (WT) hNET palmitoylation and elevated NET protein levels. The POTS-associated NET mutant, A457P, exhibits dramatically decreased transport capacity and cell surface levels which we have confirmed in the current study. In an attempt to recover A457P NET expression, we co-expressed the A457P variant with DHHC1 to drive expression as seen with the WT protein but instead saw an increase in NET N-terminal immuno-detectable forms and fragments. Elimination of a potential palmitoylation site at cysteine 44 in the N-terminal tail of hNET resulted in a low expression phenotype mimicking the A457P hNET variant. Further investigation of A457P NET palmitoylation and surface expression is necessary, but our preliminary novel findings reveal palmitoylation as a mechanism of NET regulation and suggest that dysregulation of this process may contribute to the pathogenesis of adrenergic disorders like POTS.

Evaluation of the water quality of an artificial inter-andean lake in northern Peru

Lake Burlan, a lentic ecosystem artificially created by untreated runoff from adjacent rice fields, is located in the Amazon region within the dry forests of northern Peru. This body of water plays a fundamental role in agriculture and recreational activities in the area, which are fundamental to the local economy. This research aimed to evaluate the water quality of Lake Burlan using the Water Quality Index of Peru (WQI-PE). In addition, both spatial and depth variations of limnological parameters and trace elements were determined. The WQI-PE was calculated at seven sampling stations at two depths (surface level and one meter), using 18 limnological parameters and nine trace elements. The WQI-PE assessment indicated that the lake water quality ranged from poor to fair for both depths. Statistical analysis showed that nine limnological parameters and five trace elements showed spatial differences across seven sampling stations, while three limnological parameters and two trace elements showed depth-dependent variations. Concentrations of arsenic, cadmium, mercury, and lead were in exceedance of the national and international standards on environmental water quality. Therefore, the water quality of Lake Burlan is affected mainly by the impact of the surrounding rice fields and recreational activities. This research establishes a starting point for future monitoring to assist in the implementation of prevention and mitigation.

Adaptive infrared patterns for microscopic surface reconstructions.

Multi-zoom microscopic surface reconstructions of operating sites, especially in ENT surgeries, would allow multimodal image fusion for determining the amount of resected tissue, for recognizing critical structures, and novel tools for intraoperative quality assurance. State-of-the-art three-dimensional model creation of the surgical scene is challenged by the surgical environment, illumination, and the homogeneous structures of skin, muscle, bones, etc., that lack invariant features for stereo reconstruction. An adaptive near-infrared pattern projector illuminates the surgical scene with optimized patterns to yield accurate dense multi-zoom stereoscopic surface reconstructions. The approach does not impact the clinical workflow. The new method is compared to state-of-the-art approaches and is validated by determining its reconstruction errors relative to a high-resolution 3D-reconstruction of CT data. 200 surface reconstructions were generated for 5 zoom levels with 10 reconstructions for each object illumination method (standard operating room light, microscope light, random pattern and adaptive NIR pattern). For the adaptive pattern, the surface reconstruction errors ranged from 0.5 to 0.7 mm, as compared to 1-1.9 mm for the other approaches. The local reconstruction differences are visualized in heat maps. Adaptive near-infrared (NIR) pattern projection in microscopic surgery allows dense and accurate microscopic surface reconstructions for variable zoom levels of small and homogeneous surfaces. This could potentially aid in microscopic interventions at the lateral skull base and potentially open up new possibilities for combining quantitative intraoperative surface reconstructions with preoperative radiologic imagery.

Application of Cadna/A software to the prediction of traffic noise on residential envelope sound insulation

The primary issue influencing residential structures' interior sound insulation environments is urban traffic noise. When choosing sound insulation for residential windows and doors, it is essential to consider the influence of road traffic noise. In conjunction with the examples, a three-dimensional simulation prediction model is created early on using Cadna/A software, and it is configured in accordance with the measured data of the road environmental noise to predict the sound pressure level of the outer surface of the residential building's enclosure structure at various locations and floors. This serves as a foundation for choosing the residential building's interior sound-insulated windows and doors as well as for the building's construction. In order to confirm that interior doors and windows are structurally sound-insulated, sound insulation measurements of typical residential sample buildings are made later in the building process.It offers some reference value for using Cadna/A in the assessment and forecasting of traffic noise's impact on the soundproofing of residential building envelopes.

Modulation of ADAM17 Levels by Pestiviruses Is Species-Specific.

Upon host cell infection, viruses modulate their host cells to better suit their needs, including the downregulation of virus entry receptors. ADAM17, a cell surface sheddase, is an essential factor for infection of bovine cells with several pestiviruses. To assess the effect of pestivirus infection on ADAM17, the amounts of cellular ADAM17 and its presence at the cell surface were determined. Mature ADAM17 levels were reduced upon infection with a cytopathic pestivirus bovis (bovine viral diarrhea virus, cpBVDV), pestivirus suis (classical swine fever virus, CSFV) or pestivirus giraffae (strain giraffe), but not negatively affected by pestivirus L (Linda virus, LindaV). A comparable reduction of ADAM17 surface levels, which represents the bioactive form, could be observed in the presence of E2 of BVDV and CSFV, but not LindaV or atypical porcine pestivirus (pestivirus scrofae) E2. Superinfection exclusion in BVDV infection is caused by at least two proteins, glycoprotein E2 and protease/helicase NS3. To evaluate whether the lowered ADAM17 levels could be involved in superinfection exclusion, persistently CSFV- or LindaV-infected cells were challenged with different pestiviruses. Persistently LindaV-infected cells were significantly more susceptible to cpBVDV infection than persistently CSFV-infected cells, whilst the other pestiviruses tested were not or only hardly able to infect the persistently infected cells. These results provide evidence of a pestivirus species-specific effect on ADAM17 levels and hints at the possibility of its involvement in superinfection exclusion.

Research on ash accumulation surface measurement methods based on the dot laser principle

Dust collectors are essential environmental protection equipment in thermal power plants. However, in recent years, collapses caused by excessively high material levels in the ash hopper in dust collectors have increased frequently, resulting in serious casualties and significant economic losses. The level gauge of the ash hopper is a crucial device for detecting the material level in the ash hopper and plays a vital role in preventing the ash hopper from collapsing due to excessive material load. However, level gauges of the ash hopper currently in use have various problems. Laser-ranging technology is characterized by concentrated energy, a small divergence angle, and the ability to penetrate dust. We have proposed a new material-level measurement method based on the dot matrix laser ranging principle. This method utilizes dot-matrix laser ranging and visualizes the optimized measurement data to ultimately derive information about the material surface's morphology and level. A physical hopper model is used to conduct verification experiments on various material surface morphologies, material levels, and the material hanging on the hopper wall. The results indicate that this method can accurately identify the material level and the material hanging on the hopper wall, preventing false alarms due to “false material levels.”

Exploring Electrolyte Adsorption on the Different Types of Layered Cathode Surfaces in Lithium-Ion Batteries via a Universal Neural Network Potential Method.

LiNi x Mn y Co z O2 (NCM) is a promising cathode material for lithium-ion batteries. Their long-term stability and impedance growth as cycles are strongly influenced by the properties of the cathode electrolyte interface (CEI), formed by the reaction between the electrolyte and electrode surface. Understanding of these interactions at the atomic level of the NCM electrode surface and electrolyte will provide a new strategic approach for the design of a highly functional CEI layer. In this study, we explored the influence of Ni content in transition metal layers on surface energies under different synthetic conditions and terminations using a density functional theory (DFT) validated universal neural network potential (UNNP) method. Furthermore, we investigated the adsorption of ethylene carbonate (EC) and dimethyl carbonate (DMC) on the most favorable NCM surfaces. EC and DMC displayed similar adsorption energy trends; however, differences were observed in the preferred configurations, which can affect the formation of the CEI.

Cultivating flexibility: the relationship between flexible organizational values, participation climate, and job attitudes from an employee perspective

AbstractAdopting a flexible organizational culture have the potential to be a remedy for organizations that face globalization, technological advancements, and higher expectations from the workforce. However, research on the mechanism between organizational culture and its outcomes remain understudied. This study adopts an employee-centric approach, suggesting that employees’ perception of a participation climate act as a mediator between flexible organizational culture values (clan and adhocracy values) and employees’ organizational commitment and readiness for change. Cross-sectional data was collected from 619 police employees and analyzed by a two-step structural equation modeling approach. The results supports participation climate as a mediator. Participation climate partially mediated the relationship between clan culture and organizational commitment, adhocracy culture and organizational commitment, and adhocracy culture and readiness for change. Full mediation was found for the relationship between clan culture and readiness for change. Theoretically, this study provides supporting evidence of a relationship between employees’ perceptions of flexible organizational values and a climate for participation, grounded in the notion that organizational climate is the surface level manifestation of organizational culture. Practically, the results offer valuable insight for leaders and organizations who seek knowledge on flexible values, participation climate, employee commitment and readiness for change.

СВЯЗИ МЕЖГОДОВЫХ ВАРИАЦИЙ СРЕДНЕМЕСЯЧНЫХ УРОВНЕЙ КАСПИЯ, А ТАКЖЕ СУММ АТМОСФЕРНЫХ ОСАДКОВ В ЕГО БАССЕЙНЕ И ИХ ИЗМЕНЕНИЯ ПРИ СОВРЕМЕННОМ ПОТЕПЛЕНИИ КЛИМАТА

In the modern period, the level of the Caspian Sea water surface is rapidly decreasing, which creates significant problems for the population and economy of all countries of the Caspian region. Therefore, improvement of the methods for forecasting its further changes is an urgent problem of hydrology, meteorology and ecology. It is generally accepted that the main reasons for the current decline in the Caspian Sea level are the influence of anthropogenic factors and climatic changes on the dynamics of its water balance components. A significant component of the incoming part of this balance is the amount of precipitation falling in the territory of the Caspian basin. One of the methods used for forecasting the Caspian Sea level is multiple regression analysis. The validity of the forecasts obtained with its help depends on the significance of the relationships between the studied process in the future and the factors monitored in the present and in the past that are taken into account in their development. The article assesses the significance of statistical correlations between interannual variations in the average monthly background levels of the Caspian Sea and the dynamics of precipitation amounts in its basin, as well as its changes during the period of modern climate warming. The ERA 5 reanalysis information was used as factual material on precipitation. Information on the levels was obtained from literary sources. It was found that in the period of 1979-2021 the conclusion on the significance of the relationships under consideration was characterized by the reliability of at least 0.95 only if the changes in precipitation amounts corresponded to May. As the time shift between the analyzed process and this factor increases from 0 to 36 months, their correlation remains positive and significant, but slightly weakens. During the period of modern climate warming, the revealed correlation also became weaker, which allows us to doubt its significance even in the near future. There were also identified the Caspian basin areas for which, on the contrary, the considered relationship strengthened during the same period. It implies that the probability of the scenario in which they remain significant in the future is higher than that of other scenarios. Therefore, it is reasonable to take the identified relationships into account when forecasting changes in the average level of the Caspian Sea.

Deepening awareness of inequities: investigating an advocacy project in early childhood teacher education

ABSTRACT An important goal for early childhood teacher education is to prepare teachers who advocate for policies leading to greater equity for families, young children, and the early childhood profession. This study investigated the extent to which an early childhood policy and advocacy course with an embedded advocacy project increased undergraduate students’ knowledge about inequities in early childhood as well as their attitudes toward adopting an active role in advocating for equitable child and family policies. Qualitative analysis of written reflections revealed that the project increased students’ knowledge about equity issues at a surface level and, for some students, more deeply, especially relating to specific topics of project focus. A few students even described new insights for equity-minded leadership. Several students also became more aware of inequities beyond their own project and articulated a commitment to recognize and address inequities through advocacy. Implications for early childhood teacher preparation are discussed.

Assessing Mechanochemical Properties of Acrylonitrile Butadiene Styrene (ABS) Items in Cultural Heritage Through a Multimodal Spectroscopic Approach.

A multimodal spectroscopic approach is proposed to correlate the mechanical and chemical properties of plastic materials in art and design objects, at both surface and subsurface levels, to obtain information about their conservation state and to monitor their degradation. The approach was used to investigate the photo-oxidation of acrylonitrile butadiene styrene (ABS), a plastic commonly found in many artistic and design applications, using ABS-based LEGO bricks as model samples. The modifications of the chemical and viscoelastic properties of ABS during photoaging were monitored by correlative Brillouin and Raman microspectroscopy (BRaMS), combined with portable and noninvasive broad-range external reflection infrared (IR) spectroscopy and nuclear magnetic resonance (NMR) relaxometry, directly applicable in museums. BRaMS enabled combined measurements of Brillouin light scattering and Raman spectroscopy in a microspectroscopic setup, providing for the coincident probe of the chemical and mechanical changes of ABS at the sample surface. NMR relaxometry allowed for noninvasive measurements of relaxation times and depth profiles which are directly related to the molecular mobility of the material. Complementary chemical information was acquired by external reflection IR spectroscopy. The simultaneous probe of the chemical and mechanical properties by this multimodal spectroscopic approach enabled us to define a decay model of ABS in terms of compositional changes and variation of stiffness and rigidity occurring with photodegradation. The knowledge acquired on LEGO samples has been used to rate the conservation state of ABS design objects noninvasively investigated by external reflection Fourier transform IR spectroscopy and NMR relaxometry offered by the MObile LABoratory (MOLAB) platform of the European Research Infrastructure of Heritage Science.

Objectification or experience? A critical examination of fundamental pedagogical categories in digital health education

The increasing use of digital media and technologies in sports pedagogical settings comes along with fundamental changes in basic sports pedagogical categories such as body, movement, and experience (Ruin & Giese, 2023). In health education in particular, digital devices are playing a growingly important role (McCall et al., 2018). Thereby digitalisation offers multi-layered and sometimes paradoxical opportunities and risks for health education. On the one hand, tools can help people to actively look after their own health by providing them with differentiated information about their bodies, for example. On the other hand, the information provided by such tools is always pre-formatted, limited to certain factors, subject to measurement errors and mostly geared towards young, healthy and trained men and therefore not very sensitive to the specific concerns of other groups of people. To date these opportunities and risks have not been sufficiently discussed from a sports pedagogical perspective. To gain a deeper understanding of these changes, in this theoretical contribution the mechanisms, opportunities and challenges created by digital health education in physical education are examined with a focus on the use of tools such as wearables. Based on a Bildung-oriented perspective (Wibowo et al. 2023) the possibilities and limits for digital health education in physical education are examined in a first step at the surface level, before a deeper investigation of body, movement, and experience in a digitalised world is undertaken. Bildung-theory serves as a critical background for assessing the (in)appropriateness of pedagogical interventions. This enables critical reflection at a structural level. The investigation reveals that the use of digital technologies run the risk of going hand in hand with reductionist images of humankind and a narrow understanding of education. This tends to reduce people to functional objects that are intended to increase their human capital in the interests of society, which is not pedagogically appropriate. At the same time, however, using digital technologies in digital health education opens up opportunities for experiencing differences between supposedly objective and subjective views of one’s own body and movement behaviour. This has the potential to lead to Bildung processes in which the relationship between oneself and the world is profoundly questioned. An example of the impetus for such a process could be when two children are doing the same activity and feel quite similar, but notice through a device that their bodies react in noticeably different ways. This opens up new horizons for exploring the complexity of the connections between physical activity, physical reactions and one’s own well-being. Exploring such potential of a Bildung oriented digital health education in a differentiated way can be identified as a fundamental future task of sports pedagogy. References McCall, M., Spencer, E., Owen, H., Roberts, N., & Heneghan, C. (2018). Characteristics and efficacy of digital health education: An overview of systematic reviews. Health Education Journal, 77(5), 497–514. https://doi.org/10.1177/0017896918762013 Ruin, S., & Giese, M. (2023). What is real? (Re-)Locating body, movement and experience in an increasingly digitized world. Current Issues in Sport Science, 8(3), Article 002. https://doi.org/10.36950/2023.3ciss002 Wibowo, J., Krieger, C., Gaum, C., & Dyson, B. (2023). Bildung: A German student-centered approach to health and physical education. European Physical Education Review, 29(2), 233-250. https://doi.org/10.1177/1356336X221133060

Reliable measurement of auditory-driven gamma synchrony with a single EEG electrode: A simultaneous EEG-MEG study

ObjectiveAuditory-driven gamma synchrony (GS) is linked to the function of a specific cortical circuit based on a parvalbumin+ and pyramidal neuron loop. This circuit is impaired in neuropsychiatric conditions (i.e. schizophrenia, Alzheimer's disease, stroke etc.) and its relevance in clinical practice is increasingly being recognized. Auditory stimulation at a typical gamma frequency of 40 Hz can be applied as a ‘stress test’ of excitation/inhibition (E/I) of the entire cerebral cortex, to drive GS and record it with magnetoencephalography (MEG) or high-density electroencephalography (EEG). However, these two techniques are costly and not widely available. Therefore, we assessed whether a single EEG electrode is sufficient to provide an accurate estimate of the auditory-driven GS level of the entire cortical surface while expecting the highest correspondence in the auditory and somatosensory cortices. MethodsWe measured simultaneous EEG-MEG in 29 healthy subjects, utilizing 3 EEG electrodes (C4, F4, O2) and a full MEG setup. Recordings were performed during binaural exposure to auditory gamma stimulation and during silence. We compared GS measurement of each of the three EEG electrodes separately against full MEG mapping. Time-resolved phase locking value (PLVt) was computed between EEG signals and cortex reconstructed MEG signals. ResultsDuring auditory stimulation, but not at rest, EEG captures a significant amount of GS, especially from both auditory cortices and motor-premotor regions. This was especially true for frontal (C4) and central electrodes (F4). Discussion and ConclusionsWhile hd-EEG and MEG are necessary for accurate spatial mapping of GS at rest and during auditory stimulation, a single EEG channel is sufficient to detect the global level of GS. These results have great translational potential for mapping GS in standard clinical settings.