Surface-immobilized Enzymes Research Articles

Enzymatic Reaction in a Capillary Microreactor with Surface-Immobilized Enzyme

Enzymatic Reaction in a Capillary Microreactor with Surface-Immobilized Enzyme

Electrochemical biosensing platform based on AuNWs/rGO-CMC-PEDOT:PSS composite for the detection of superoxide anion released from living cells

Detection of superoxide anion (O2·-) levels holds significant importance for the diagnosis and even clinical treatments of oxidative stress-related diseases. Herein, we prepared a composite electrode material to encapsulate copper-zinc superoxide dismutase (SOD1) for biosensing of O2·-. The sensing material consists of gold nanowires (AuNWs), reduced graphene oxide (rGO), carboxymethyl cellulose (CMC) and PEDOT:PSS. CMC provides abundant -COOH to bind SOD1, with a high adsorption coverage of 1.499 × 10−9 mol cm−2 on the sensor surface. rGO and PEDOT endow the composite with significant conductivity, whereas PSS has antifouling capability. Moreover, AuNWs exhibit excellent electrical conductivity and a high aspect ratio, which promotes electron transfer, and ultimately enhances the catalytic performance of the enzyme. Meanwhile, SOD1(Cu2+) catalyzes the dismutation of O2·- to O2 and H2O2, and H2O2 is then electrochemically oxidized to generate amperometric signals for determination of O2·-. The sensor demonstrates outstanding detection performance for O2·- with a low detection limit of 2.52 nM, and two dynamic ranges (14.30 nM–1.34 μM and 1.34 μM–42.97 μM) with corresponding sensitivity of 0.479 and 0.052 μA μM−1cm−2, respectively. Additionally, the calculated apparent Michaelis constant (Kmapp) of 1.804 μM for SOD1 demonstrates the outstanding catalytic activity and the surface-immobilized enzyme's substrate affinity. Furthermore, the sensor shows the capability to dynamically detect the level of O2·- released from living HepG2 cells. This study provides an inovative design to obtain a biocompatible electrochemical sensing platform with plenty of immobilization sites for biomolecules, large surface area, high conductivity and flexibility.

Ultrasensitive Detection of Hydrogen Peroxide Using Methylene Blue Grafted on Molecular Wires as Nanozyme with Catalase-like Activity.

In this study, we present the development of an electrochemical sensor designed for ultrasensitive detection of endogenous H2O2. This sensor relies on signal amplification achieved through nanozyme activity exhibited by methylene blue (MB) grafted onto a peptide support. The sensor exhibited excellent selectivity and sensitivity, with a limit of detection of 18 nM and a linear detection range of 20-200 nM. Thus, we have validated the concept of the MB-peptide system, serving as both an electroactive label and a catalyst for H2O2 decomposition under electrochemical conditions. The implemented signal amplification system enables the rapid detection of H2O2, with an overall assay time of 1-2 min, a significant improvement compared to amperometric detection using surface-immobilized enzymes.

Glycerol Flow through a Shielded Coil Induces Aggregation and Activity Enhancement of Horseradish Peroxidase

Glycerol has found its applications as a heat-transfer fluid in heat exchangers, and as a component of functional liquids in biosensor analysis. Flowing non-aqueous fluids are known to be able to induce electromagnetic fields due to the triboelectric effect. These triboelectrically generated electromagnetic fields can affect biological macromolecules. Horseradish peroxidase (HRP) is widely employed as a convenient model object for studying how external electric, magnetic, and electromagnetic fields affect enzymes. Herein, we have studied whether the flow of glycerol in a ground-shielded cylindrical coil affects the HRP enzyme incubated at a 2 cm distance near the coil’s side. Atomic force microscopy (AFM) has been employed in order to study the effect of glycerol flow on HRP at the nanoscale. An increased aggregation of HRP on mica has been observed after the incubation of the enzyme near the coil. Moreover, the enzymatic activity of HRP has also been affected. The results reported that their application can be found in biotechnology, food technology and life sciences applications, considering the development of triboelectric generators, enzyme-based biosensors and bioreactors with surface-immobilized enzymes. Our work can also be of interest for scientists studying triboelectric phenomena, representing one more step toward understanding the mechanism of the indirect action of the flow of a dielectric liquid on biological macromolecules.

Non-invasive, ultrasensitive detection of glucose in saliva using metal oxide transistors

Transistor-based biosensors represent an emerging technology for inexpensive point-of-care testing (POCT) applications. However, the limited sensitivity of the current transistor technologies hinders their practical deployment. In this study, we developed tri-channel In2O3/ZnO heterojunction thin-film transistors (TFTs) featuring the surface-immobilized enzyme glucose oxidase to detect glucose in various biofluids. This unusual channel design facilitates strong coupling between the electrons transported along the buried In2O3/ZnO heterointerface and the electrostatic perturbations caused by the interactions between glucose and surface-immobilized glucose oxidase. The enzyme selectively binds to glucose, causing a change in charge density on the channel surface. By exploring this effect, the solid-state biosensing TFT (BioTFT) can selectively detect glucose in artificial and real saliva over a wide range of concentrations from 500 nM to 20 mM with limits of detection of ∼365 pM (artificial saliva) and ∼416 nM (real saliva) in less than 60 s. The specificity of the sensor towards glucose has been demonstrated against various interfering species in artificial saliva, further highlighting its unique capabilities. Moreover, the BioTFTs exhibited good operating stability upon storage for up to two weeks, with relative standard deviation (RSD) values ranging from 2.36% to 6.39% for 500 nM glucose concentration. Our BioTFTs are easy to manufacture with reliable operation, making them ideal for non-invasive POCT applications.

Expression of phenylalanine ammonia lyase as an intracellularly free and extracellularly cell surface-immobilized enzyme on a gut microbe as a live biotherapeutic for phenylketonuria.

Phenylketonuria (PKU), a disease resulting in the disability to degrade phenylalanine (Phe) is an inborn error with a 1 in 10,000 morbidity rate on average around the world which leads to neurotoxicity. As an potential alternative to a protein-restricted diet, oral intake of engineered probiotics degrading Phe inside the body is a promising treatment, currently at clinical stage II (Isabella, et al., 2018). However, limited transmembrane transport of Phe is a bottleneck to further improvement of the probiotic’s activity. Here, we achieved simultaneous degradation of Phe both intracellularly and extracellularly by expressing genes encoding the Phe-metabolizing enzyme phenylalanine ammonia lyase (PAL) as an intracellularly free and a cell surface-immobilized enzyme in Escherichia coli Nissle 1917 (EcN) which overcomes the transportation problem. The metabolic engineering strategy was also combined with strengthening of Phe transportation, transportation of PAL-catalyzed trans-cinnamic acid and fixation of released ammonia. Administration of our final synthetic strain TYS8500 with PAL both displayed on the cell surface and expressed inside the cell to the PahF263S PKU mouse model reduced blood Phe concentration by 44.4% compared to the control EcN, independent of dietary protein intake. TYS8500 shows great potential in future applications for PKU therapy.Supporting InformationThe supporting information is available online at 10.1007/s11427-021-2137-3. The supporting materials are published as submitted, without typesetting or editing. The responsibility for scientific accuracy and content remains entirely with the authors.

Self-Immobilized Putrescine Oxidase Biocatalyst System Engineered with a Metal Binding Peptide.

Flavin oxidases are valuable biocatalysts for the oxidative synthesis of a wide range of compounds, while at the same time reduce oxygen to hydrogen peroxide. Compared to other redox enzymes, their ability to use molecular oxygen as an electron acceptor offers a relatively simple system that does not require a dissociable coenzyme. As such, they are attractive targets for adaptation as cost-effective biosensor elements. Their functional immobilization on surfaces offers unique opportunities to expand their utilization for a wide range of applications. Genetically engineered peptides have been demonstrated as enablers of the functional assembly of biomolecules at solid material interfaces. Once identified as having a high affinity for the material of interest, these peptides can provide a single step bioassembly process with orientation control, a critical parameter for functional immobilization of the enzymes. In this study, for the first time, we explored the bioassembly of a putrescine oxidase enzyme using a gold binding peptide tag. The enzyme was genetically engineered to incorporate a gold binding peptide with an expectation of an effective display of the peptide tag to interact with the gold surface. In this work, the functional activity and expression were investigated, along with the selectivity of the binding of the peptide-tagged enzyme. The fusion enzyme was characterized using multiple techniques, including protein electrophoresis, enzyme activity, and microscopy and spectroscopic methods, to verify the functional expression of the tagged protein with near-native activity. Binding studies using quartz crystal microbalance (QCM), nanoparticle binding studies, and atomic force microscopy studies were used to address the selectivity of the binding through the peptide tag. Surface binding AFM studies show that the binding was selective for gold. Quartz crystal microbalance studies show a strong increase in the affinity of the peptide-tagged protein over the native enzyme, while activity assays of protein bound to nanoparticles provide evidence that the enzyme retained catalytic activity when immobilized. In addition to showing selectivity, AFM images show significant differences in the height of the molecules when immobilized through the peptide tag compared to immobilization of the native enzyme, indicating differences in orientation of the bound enzyme when attached via the affinity tag. Controlling the orientation of surface-immobilized enzymes would further improve their enzymatic activity and impact diverse applications, including oxidative biocatalysis, biosensors, biochips, and biofuel production.

Stability-Controllable Self-Immobilization of Carbonic Anhydrase Fused with a Silica-Binding Tag onto Diatom Biosilica for Enzymatic CO2 Capture and Utilization.

Exploiting carbonic anhydrase (CA), an enzyme that catalyzes the hydration of CO2, is a powerful route for eco-friendly and cost-effective carbon capture and utilization. For successful industrial applications, the stability and reusability of CA should be improved, which necessitates enzyme immobilization. Herein, the ribosomal protein L2 (Si-tag) from Escherichia coli was utilized for the immobilization of CA onto diatom biosilica, a promising renewable support material. The Si-tag was redesigned (L2NC) and genetically fused to CA from the marine bacterium Hydrogenovibrio marinus (hmCA). One-step self-immobilization of hmCA-L2NC onto diatom biosilica by simple mixing was successfully achieved via Si-tag-mediated strong binding, showing multilayer adsorption with a maximal loading of 1.4 wt %. The immobilized enzyme showed high reusability and no enzyme leakage even under high temperature conditions. The activity of hmCA-L2NC was inversely proportional to the enzyme loading, while the stability was directly proportional to the enzyme loading. This discovered activity-stability trade-off phenomenon could be attributed to macromolecular crowding on the highly dense surface of the enzyme-immobilized biosilica. Collectively, our system not only facilitates the stability-controllable self-immobilization of enzyme via Si-tag on a diatom biosilica support for the robust, facile, and green construction of stable biocatalysts, but is also a unique model for studying the macromolecular crowding effect on surface-immobilized enzymes.

Investigating the Effect of Two-Point Surface Attachment on Enzyme Stability and Activity.

Immobilization on solid supports provides an effective way to improve enzyme stability and simplify downstream processing for biotechnological applications, which has been widely used in research and in applications. However, surface immobilization may disrupt enzyme structure due to interactions between the enzyme and the supporting substrate, leading to a loss of the enzyme catalytic efficiency and stability. Here, we use a model enzyme, nitroreductase (NfsB), to demonstrate that engineered variants with two strategically positioned surface-tethering sites exhibit improved enzyme stability when covalently immobilized onto a surface. Tethering sites were designed based on molecular dynamics (MD) simulations, and enzyme variants containing cysteinyl residues at these positions were expressed, purified, and immobilized on maleimide-terminated self-assembled monolayer (SAM) surfaces. Sum frequency generation (SFG) vibrational spectroscopy and attenuated total reflection Fourier transform infrared (ATR-FTIR) spectroscopy were used to deduce the NfsB enzyme orientations, which were found to be consistent with those predicted from the MD simulations. Thermal stability analyses demonstrated that NfsB variants immobilized through two tethering sites exhibited generally improved thermal stability compared with enzymes tethered at only one position. For example, NfsB enzyme chemically immobilized via positions 423 and 111 exhibits at least 60% stability increase compared to chemically immobilized NfsB mutant via a single site. This research develops a generally applicable and systematic approach using a combination of simulation and experimental methods to rationally select protein immobilization sites for the optimization of surface-immobilized enzyme activity and stability.

Simultaneous Observation of the Orientation and Activity of Surface-Immobilized Enzymes.

Surface immobilized enzymes have been widely used in many applications such as biosensors, biochips, biofuel production, and biofuel cell construction. Many factors dictate how enzymes' structure, activity, and stability may change when immobilized, including surface functionalization, immobilization chemistry, nature of the solid support, and enzyme surface density. To better understand how immobilization affects enzyme structure and activity, we have developed a method to measure both surface-sensitive protein vibrational spectra and enzymatic activity simultaneously. To accomplish this, an optical/fluorescence microscope was incorporated into a sum frequency generation (SFG) spectrometer. Using β-glucosidase (β-Glu) as a model system, enzymes were covalently tethered to a self-assembled monolayer surface using cysteine-maleimide chemistry. Their orientations were determined by SFG spectroscopy, with a single native cysteine residue oriented toward the functionalized surface, and activity measured simultaneously using a fluorogenic substrate resorufin β-d-glucopyranoside, with a loss of activity of 53% as compared to comparable solution measurements. Measuring β-Glu activity and orientation simultaneously provides more accurate information for designing and further improving enzymatic activity of surface-bound enzymes.

Engineered Surface-Immobilized Enzyme that Retains High Levels of Catalytic Activity in Air

In the absence of aqueous buffer, most enzymes retain little or no activity; however, "water-free" enzymes would have many diverse applications. Here, we describe the chemically precise immobilization of an enzyme on an engineered surface designed to support catalytic activity in air at ambient humidity. Covalent immobilization of haloalkane dehalogenase on a surface support displaying poly(sorbitol methacrylate) chains resulted in ∼40-fold increase in activity over lyophilized enzyme powders for the gas-phase dehalogenation of 1-bromopropane. The activity of the immobilized enzyme in air approaches 25% of the activity obtained in buffer for the immobilized enzyme. Poly(sorbitol methacrylate) appears to enhance activity by replacing protein-water interactions, thereby preserving the protein structure.

Enzyme immobilization on biomaterial surfaces for prevention of pseudomonas aeruginosa biofilms

Event Abstract Back to Event Enzyme immobilization on biomaterial surfaces for prevention of pseudomonas aeruginosa biofilms Dalal Asker1, 2, Tarek Awad1, Perrin Baker3, Lynne Howell3, 4 and Benjamin Hatton1 1 University of Toronto, Materials Science and Engineering, Canada 2 Alexandria University, Food Science & Technology Department, Egypt 3 Hospital for Sick Children, Canada 4 University of Toronto, Dept. of Biochemistry, Canada Introduction: Implanted devices are at significant risk of developing bacterial biofilm-associated infections. Approximately 60% of all hospital-acquired infections (HAIs) are the result of biofilm formation on implanted medical devices and the bacterium Pseudomonas aeruginosa is one of the most prevalent isolated pathogens. Bacterial biofilms are communities of bacteria encased within a protective extracellular matrix. Exopolysaccharides (EPS) are the predominant component of biofilm matrix for many bacteria, contributing to initial adhesion, architecture, and resistance. Bacteria in biofilm are highly tolerant to antibiotics and can evade the host immune system. Recently we identified and produced several recombinant glycoside hydrolases that selectively target and hydrolyze biofilm EPS. Two of these enzymes - PslGh, and PelAh - hydrolyze the Psl and Pel polysaccharides from P. aeruginosa, respectively, and were found to be effective in solution at disrupting the biofilms from lab, clinical and environmental isolates. Current antibiotic therapy and antimicrobial surfaces are ineffective against biofilm infections. Therefore, we aim to use surface-immobilized enzymes as a means of preventing biofilm formation on implanted medical devices such as endotracheal tubes. Materials and Methods: We tested the immobilization of PslGh onto polymer biomaterial surfaces as a means of preventing biofilm growth for P. aeruginosa in long term static and flow culture. The enzyme was covalently bound with glutaraldehyde cross-linking to glass and PDMS surfaces and its attachment confirmed by ATR-FTIR and contact angle measurements. To evaluate anti-biofilm efficacy, our biomaterial surfaces were incubated in P. aeruginosa culture that overexpresses the Psl polysaccharide for varying duration. Fluorescence microscopy and fluorescent dyes (SYTOX Green) were used and for quantitative analysis, we used turbidity and crystal violet staining methods. Results and Discussion: The covalently-bound PslGh inhibited both cell attachment and biofilm formation of the P. aeruginosa (Psl-dependent) cells (Fig 1a), compared with the control (i.e., no enzyme) or a catalytically inactive enzyme (Fig. 1b) over a 24 hour period. This indicates that the anti-biofilm activity of PslGh is directly related its catalytic activity. The covalently-immobilized PslGh enzyme was also effective at preventing biofilm formation for an 8 day static culture. Quantitative analysis using crystal violet straining indicated significant anti-biofilm activity for the immobilized PslG, as compared with the control sample. Conclusion: These results indicate the high specificity of PslGh in targeting the Psl exopolysacchride in P. aeruginosa biofilms, which appears to greatly inhibit bacterial colonization and biofilm growth, even when the enzyme is covalently-immobilized on the polymer surface. Figure 1. Inhibition of P. aeruginosa (Psl-dependent) biofilm attachment and formation by covalently-attached PslGh on PDMS samples. (a) untreated PDMS; (b) catalytically-inactive mutant PslGh (mPslGh) covalently immobilized on PDMS; and (c) PslGh covalently immobilized on PDMS. Images were observed with 20X dry objectives. Scale bars, 40 µm. Keywords: Bacteria, Implant, biofunctionalization, bioactive interface, enzyme Conference: 10th World Biomaterials Congress, Montréal, Canada, 17 May - 22 May, 2016. Presentation Type: New Frontier Oral Topic: Interfacial phenomena Citation: Asker D, Awad T, Baker P, Howell L and Hatton B (2016). Enzyme immobilization on biomaterial surfaces for prevention of pseudomonas aeruginosa biofilms. Front. Bioeng. Biotechnol. Conference Abstract: 10th World Biomaterials Congress. doi: 10.3389/conf.FBIOE.2016.01.00131 Copyright: The abstracts in this collection have not been subject to any Frontiers peer review or checks, and are not endorsed by Frontiers. They are made available through the Frontiers publishing platform as a service to conference organizers and presenters. The copyright in the individual abstracts is owned by the author of each abstract or his/her employer unless otherwise stated. Each abstract, as well as the collection of abstracts, are published under a Creative Commons CC-BY 4.0 (attribution) licence (https://creativecommons.org/licenses/by/4.0/) and may thus be reproduced, translated, adapted and be the subject of derivative works provided the authors and Frontiers are attributed. For Frontiers’ terms and conditions please see https://www.frontiersin.org/legal/terms-and-conditions. Received: 27 Mar 2016; Published Online: 30 Mar 2016. Login Required This action requires you to be registered with Frontiers and logged in. To register or login click here. Abstract Info Abstract The Authors in Frontiers Dalal Asker Tarek Awad Perrin Baker Lynne Howell Benjamin Hatton Google Dalal Asker Tarek Awad Perrin Baker Lynne Howell Benjamin Hatton Google Scholar Dalal Asker Tarek Awad Perrin Baker Lynne Howell Benjamin Hatton PubMed Dalal Asker Tarek Awad Perrin Baker Lynne Howell Benjamin Hatton Related Article in Frontiers Google Scholar PubMed Abstract Close Back to top Javascript is disabled. Please enable Javascript in your browser settings in order to see all the content on this page.

Molecular-Level Insights into Orientation-Dependent Changes in the Thermal Stability of Enzymes Covalently Immobilized on Surfaces

Surface-immobilized enzymes are important for a wide range of technological applications, including industrial catalysis, drug delivery, medical diagnosis, and biosensors; however, our understanding of how enzymes and proteins interact with abiological surfaces on the molecular level remains extremely limited. We have compared the structure, activity, and thermal stability of two variants of a β-galactosidase attached to a chemically well-defined maleimide-terminated self-assembled monolayer surface through a unique cysteinyl residue. In one case the enzyme is attached through an α helix and in the other case through an adjacent loop. Both enzymes exhibit similar specific activities and adopt similar orientations with respect to the surface normal, as determined by sum-frequency generation and attenuated total reflectance FT-IR spectroscopies. Surprisingly, however, the loop-tethered enzyme exhibits a thermal stability 10 °C lower than the helix-tethered enzyme and 13 °C lower than the enzyme in free solution. Using coarse-grain models, molecular dynamics simulations of the thermal unfolding of the surface-tethered enzymes were able to reproduce these differences in stability. Thus, revealing that tethering through the more flexible loop position provides more opportunity for surface residues on the protein to interact with the surface and undergo surface-induced unfolding. These observations point to the importance of the location of the attachment point in determining the performance of surface-supported biocatalysts and suggest strategies for optimizing their activity and thermal stability through molecular simulations.

Surface immobilization of a protease through an inhibitor-derived affinity ligand: a bioactive surface with defensive properties against an inhibitor.

The concept of enzyme immobilization via an inhibitor-derived peptide was developed. This method of immobilization was shown to be advantageous over physical adsorption and covalent bonding in retaining the enzymatic activity. Moreover, the surface-immobilized enzyme exhibited resistance against its inhibitor due to the occupation of an inhibitor binding site on the enzyme.

Characterization and osteogenic activity of a silicatein/biosilica-coated chitosan-graft-polycaprolactone

Several attempts have been made in the past to fabricate hybrid materials that display the complementary properties of the polyester polycaprolactone (PCL) and the polysaccharide chitosan (CHS) for application in the field of bone regeneration and tissue engineering. However, such composites generally have no osteogenic activity per se. Here we report the synthesis of a chitosan-graft-polycaprolactone (CHS-g-PCL) and its subsequent characterization, including crystallinity, chemical structure and thermal stability. Upon surface-functionalization of CHS-g-PCL with osteogenic biosilica via the surface-immobilized enzyme silicatein, protein adsorption, surface morphology and wettability were assessed. Finally, the cultivation of osteoblastic SaOS-2 cells on the surface-functionalized CHS-g-PCL was followed by analyses of cell viability, mineral deposition and alkaline phosphatase activity. These characterizations revealed a composite that combines the versatile properties of CHS-g-PCL with the osteogenic activity of the silicatein/biosilica coating and, hence, represents an innovative alternative to conventionally used CHS/PCL composites for biomedical applications, where stable bone–material interfaces are required.

Self-powered enzyme micropumps.

Non-mechanical nano- and microscale pumps that function without the aid of an external power source and provide precise control over the flow rate in response to specific signals are needed for the development of new autonomous nano- and microscale systems. Here we show that surface-immobilized enzymes that are independent of adenosine triphosphate function as self-powered micropumps in the presence of their respective substrates. In the four cases studied (catalase, lipase, urease and glucose oxidase), the flow is driven by a gradient in fluid density generated by the enzymatic reaction. The pumping velocity increases with increasing substrate concentration and reaction rate. These rechargeable pumps can be triggered by the presence of specific analytes, which enables the design of enzyme-based devices that act both as sensor and pump. Finally, we show proof-of-concept enzyme-powered devices that autonomously deliver small molecules and proteins in response to specific chemical stimuli, including the release of insulin in response to glucose.

A gold@silica core–shell nanoparticle-based surface-enhanced Raman scattering biosensor for label-free glucose detection

The gold nanostar@silica core–shell nanoparticles conjugated with glucose oxidase (GOx) enzyme molecules have been developed as the surface-enhanced Raman scattering (SERS) biosensor for label-free detection of glucose. The surface-immobilized GOx enzyme catalyzes the oxidation of glucose, producing hydrogen peroxide. Under laser excitation, the produced H2O2 molecules near the Au nanostar@silica nanoparticles generate a strong SERS signal, which is used to measure the glucose concentration. The SERS signal of nanostar@silica∼GOx nanoparticle-based sensing assay shows the dynamic response to the glucose concentration range from 25μM to 25mM in the aqueous solution with the limit of detection of 16μM. The sensing assay does not show any interference when glucose co-exists with both ascorbic acid and uric acid. The sensor can be applied to a saliva sample.

Molecular Orientation of Enzymes Attached to Surfaces through Defined Chemical Linkages at the Solid–Liquid Interface

The immobilization of enzymes on solid supports is widely used in many applications, including biosensors, antifouling coatings, food packaging materials, and biofuel cells. Enzymes tend to lose their activity when in contact with a support surface, a phenomenon that has been attributed to unfavorable orientation and (partial) unfolding. In this work, specific immobilization of 6-phospho-β-galactosidase (β-Gal) on a self-assembled monolayer (SAM) containing maleimide end groups and oligo(ethylene glycol) spacer segments was achieved through a unique cysteinyl residue. A systematic means to characterize the interfacial orientation of immobilized enzymes has been developed using a combination of sum frequency generation vibrational spectroscopy and attenuated total reflectance FTIR-spectroscopy. The possible orientations of the immobilized β-Gal were determined and found to be well-correlated with the tested activity of β-Gal. This study will impact the development of an increasingly wide range of devices that use surface-immobilized enzymes as integral components with improved functions, better sensitivity, enhanced stability, and longer shelf life.

Enzymatically Enhanced Guided Tissue Regeneration

In order to improve the efficacy of mem- branes used for guided tissue regeneration treatments, collagen membranes were surface-modified with the pro-mineralization enzyme alkaline phosphatase (ALP). ALP was surface-immobilized using electrostatic spray deposition (ESD) to preserves the biological activity of the enzyme. Initially, the optimal ALP-deposition time was assessed using ALP-activity assays and an immersion exper- iment with subsequent measurements on calcium deposi- tion. These initial experiments demonstrated that optimally efficient membranes were obtained with an ALP deposition time of 30 minutes. Subsequently, ALP-coated and non- coated controls were enrolled in a cell culture experiment with primary rat bone marrow derived osteoblast-like cells. ALP-coated membranes demonstrated to have no effect on cell proliferation and morphology, but significantly accel- erated the mineralization of the extracellular matrix. These results show the potential of ALP as a surface-immobilized active enzyme in biomaterial research and justify animal experimental work on this topic to obtain in vivo data.

Dynamic display of biomolecular patterns through an elastic creasing instability of stimuli-responsive hydrogels

Surfaces with physicochemical properties that can be modulated using external stimuli offer great promise for designing responsive or adaptive materials. Here, we describe biocompatible dynamic scaffolds based on thin hydrogel coatings that reversibly hide and display surface chemical patterns in response to temperature changes. At room temperature, the gel absorbs water, triggering an elastic creasing instability that sequesters functionalized regions within tight folds in the surface. Deswelling at approximately 37 degrees C causes the gel surface to unfold, thereby regenerating the biomolecular patterns. Crease positions are directed by topographic features on the underlying substrate, and are translated into two-dimensional micrometre-scale surface chemical patterns through selective deposition of biochemically functionalized polyelectrolytes. We demonstrate specific applications of these dynamic scaffolds--selective capture, sequestration and release of micrometre-sized beads, tunable activity of surface-immobilized enzymes and reversible encapsulation of adherent cells--which offer promise for incorporation within lab-on-a-chip devices or as dynamic substrates for cellular biology.