Surface-enhanced Raman Scattering Signal Research Articles

A nano-imprinted graphene oxide-cellulose composite as a SERS active substrate.

Cellulose is a sustainable material capable of forming optically active nanoarrays on its surface. We created a composite of cellulose acetate (CA) and graphene oxide (GO), by mixing GO (0.1 mg mL-1) into CA. This was then imprinted with nanoscale surface features that form Bragg-like modes in resonance with the excitation laser when a thin layer of silver is vapor deposited onto the surface of the substrate. The addition of GO leads to improved surface-enhanced Raman scattering (SERS) signal strengths, obtaining an average SERS signal increase of 1.4-fold following the inclusion of GO. The combination of photonic and electromagnetic effects with charge transfer-based processes that support the SERS chemical mechanism and the possible presence of electromagnetic hot spots from the roughened surface results in an enhanced SERS signal strength when GO is added. This work shows the potential for nanoimprinted graphene oxide/cellulose acetate composites as flexible sensor platforms to detect target molecules.

Novel SERS Probe Based on Ag Nanobean/Cu Foam for Deep-Sea Extreme Environment Biomolecule Detection.

Here, we report on progress made in coupling advances in surface-enhanced Raman scattering (SERS) techniques with a deep-ocean deployable Raman spectrometer. Our SERS capability is provided by development of a Cu foam-loaded silver-nanobean (Ag/Cu foam) which we have successfully coupled to the tip of a Raman probe head capable of insertion into deep-sea sediments and associated fluids. Our purpose is to expand the range of molecular species which can be detected in deep-sea biogeochemical environments, and our initial targets are a series of amino acids reportedly found in pore waters of seep locations. Our work has progressed to the point of a full dock-based end-to-end test of the essential ship tether-ROV-deep-sea Raman system. We show here the initial results from this test as the essential requirement before at sea full ocean depth deployment. We describe in detail the procedures for preparing the Ag/Cu foam bean and demonstrate in our end-to-end test that this, when coupled to the spectrometer probe tip, yields a SERS signal enhancement of 1.2 × 106 for test molecules and detection of amino acids at 10-6 M levels consistent with reported levels of natural occurrence. Each nanobean unit is for single-use sensing since invasion of the sample fluid into the Ag/Cu foam matrix is not reversible. We describe techniques for bean rotation/replacement at depth to allow for multiple analyses at several locations during each ROV dive.

Localized surface plasmon resonance (LSPR) excitation on single silver nanoring with nanoscale surface roughness

With the expansion of the application of high-sensitivity Surface-enhanced Raman scattering (SERS) technique, micro SERS-active substrates with rich optical properties and high-level functions are desired. In this study, silver nanorings with nanoscale surface roughness were fabricated as a new type of enclosed quasi-2D micro-SERS-active substrate. Highly-crystalline spherical and hemispherical silver nanoprotrusions were densely and uniformly distributed over the entire surface of the nanorings. The SERS signals were significantly enhanced on the roughened silver nanorings which were mainly derived from the maximal localized surface plasmon resonance (LSPR) points at the junctions between adjacent coupled nanoprotrusions on the roughened nanorings. The mapping image shows a uniform and intense LSPR enhancement over the nanorings, owing to the uniform and dense distribution of silver nanoprotrusions and the resulting uniform distribution of maximal LSPR points on the roughened nanorings. The dark-field spectra further indicated that the single roughened silver nanoring had significant LSPR enhancement, a wide LSPR frequency-range response, and adaptability for SERS enhancement. Notably, both the measured and simulated results demonstrate that the maximal LSPR enhancement at the junctions between the nanoprotrusions, which are distributed on the inner surface of the silver nanoring, is higher than that on the outer surface because of the plasmon-focusing effect of the enclosed silver nanoring, which leads to the lateral asymmetrical distribution of LSPR intensity, indicating more LSPR and SERS features. These results indicate that single roughened silver nanorings exhibit excellent performance as a new type of enclosed quasi-2D silver nanoring micro-SERS-active substrate, microzone LSPR catalysis, and micro/nanodevices.

Designing SERS nanotags for profiling overexpressed surface markers on single cancer cells: A review

This review focuses on the chemical design and the use of Surface-Enhanced Raman Scattering (SERS)-active nanotags for measuring surface markers that can be overexpressed at the surface of single cancer cells. Indeed, providing analytical tools with true single-cell measurements capabilities is capital, especially since cancer research is increasingly leaning toward single-cell analysis, either to guide treatment decisions or to understand complex tumor behaviour including the single-cell heterogeneity and the appearance of treatment resistance. Over the past two decades, SERS nanotags have triggered significant interest in the scientific community owing their advantages over fluorescent tags, mainly because SERS nanotags resist photobleaching and exhibit sharper signal bands, which reduces possible spectral overlap and enables the discrimination between the SERS signals and the autofluorescence background from the sample itself. The extensive efforts invested in harnessing SERS nanotags for biomedical purposes, particularly in cancer research, highlight their potential as the next generation of optical labels for single-cell studies. The review unfolds in two main parts. The first part focuses on the structure of SERS nanotags, detailing their chemical composition and the role of each building block of the tags. The second part explores applications in measuring overexpressed surface markers on single-cells. The latter encompasses studies using single nanotags, multiplexed measurements, quantitative information extraction, monitoring treatment responses, and integrating phenotype measurements with SERS nanotags on single cells isolated from complex biological matrices. This comprehensive review anticipates SERS nanotags to persist as a pivotal technology in advancing single-cell analytical methods, particularly in the context of cancer research and personalized medicine.

Bilateral efforts to improve SERS detection efficiency of exosomes by Au/Na7PMo11O39 Combined with Phospholipid Epitope Imprinting

Detection of cancer-related exosomes in body fluids has become a revolutionary strategy for early cancer diagnosis and prognosis prediction. We have developed a two-step targeting detection method, termed PS-MIPs-NELISA SERS, for rapid and highly sensitive exosomes detection. In the first step, a phospholipid polar site imprinting strategy was employed using magnetic PS-MIPs (phospholipids-molecularly imprinted polymers) to selectively isolate and enrich all exosomes from urine samples. In the second step, a nanozyme-linked immunosorbent assay (NELISA) technique was utilized. We constructed Au/Na7PMo11O39 nanoparticles (NPs) with both surface-enhanced Raman scattering (SERS) property and peroxidase catalytic activity, followed by the immobilization of CD9 antibodies on the surface of Au/Na7PMo11O39 NPs. The Au/Na7PMo11O39-CD9 antibody complexes were then used to recognize CD9 proteins on the surface of exosomes enriched by magnetic PS-MIPs. Lastly, the high sensitivity detection of exosomes was achieved indirectly via the SERS activity and peroxidase-like activity of Au/Na7PMo11O39 NPs. The quantity of exosomes in urine samples from pancreatic cancer patients obtained by the PS-MIPs-NELISA SERS technique showed a linear relationship with the SERS intensity in the range of 6.21 × 107–2.81 × 108 particles/mL, with a limit of detection (LOD) of 5.82 × 107 particles/mL. The SERS signal intensity of exosomes in urine samples from pancreatic cancer patients was higher than that of healthy volunteers. This bidirectional MIPs-NELISA-SERS approach enables noninvasive, highly sensitive, and rapid detection of cancer, facilitating the monitoring of disease progression during treatment and opening up a new avenue for rapid early cancer screening.

Inflammatory bowel disease alters in vivo distribution of orally administrated nanoparticles: Revealing via SERS tag labeling technique

Nanoparticles (NPs) could be uptake orally and exposed to digestive tract through various sources such as particulate pollutant, nanomedicine and food additive. Inflammatory bowel disease (IBD), as a global disease, induced disruption of the intestinal mucosal barrier and thus altered in vivo distribution of NPs as a possible consequence. However, related information was relatively scarce. Herein, in vivo distribution of typical silica (SiO2) and titania (TiO2) NPs was investigated in healthy and IBD models at cell and animal levels via a surface-enhanced Raman scattering (SERS) tag labeling technique. The labeled NPs were composed of gold SERS tag core and SiO2 (or TiO2) shell, demonstrating sensitive and characteristic SERS signals ideal to trace the NPs in vivo. Cell SERS mapping revealed that protein corona from IBD intestinal fluid decreased uptake of NPs by lipopolysaccharide-induced RAW264.7 cells compared with normal intestinal fluid protein corona. SERS signal detection combined with inductively coupled plasma mass spectrometry (ICP-MS) analysis of mouse tissues (heart, liver, spleen, lung and kidney) indicated that both NPs tended to accumulate in lung specifically after oral administration for IBD mouse (6 out of 20 mice for SiO2 and 4 out of 16 mice for TiO2 were detected in lung). Comparatively, no NP signals were detected in all tissues from healthy mice. These findings suggested that there might be a greater risk associated with the oral uptake of NPs in IBD patients due to altered in vivo distribution of NPs.

In situ quantitative mapping of coding single nucleotide polymorphism on mRNA inside cells by SERS-fluorescence dual-mode probe

Surface Enhanced Raman Scattering (SERS) has potential in nucleic acid detection, but its ability on single nucleotide polymorphisms (SNPs) detection in the early diagnosis of diseases is still limited. In fact, there is few research about in situ detection of coding SNPs which are carried on mRNA. In this paper, we developed SERS-Fluorescence Dual-mode probes to achieve in situ quantitative mapping of intracellular cSNP. The probes were based on Au@Ag core-shell structure that possessed both excellent biocompatibility and localized surface plasmon resonance. Fluorescence can provide a rapid visualization of intracellular cSNP, while SERS can achieve its in situ quantification. The quantitation was conducted by comparing the SERS signals of the reporting molecule p-mercaptobenzoic acid and fluorescent molecule FAM, the detecting limitation of which can be achieved as low as 1.4 fM. This ratiometric detection is more accurate than traditional analysis based on signal intensity directly. It successfully achieved intracellular imaging of the G12D mutation site of KRAS gene in A549 cells, which can help to get the distribution of cSNP in single cell more clearly. And it also demonstrated the good mapping ability for biomolecules (1003 cm−1 for phenylalanine) simultaneously. In conclusion, this kind of probe could be used as a potential tool to monitor cSNP as well as biomolecules in multiple biological processes, which could provide reference for disease prediction.

An ultrasensitive dual-mode approach for AFB1 detection: Colorimetric/label-free SERS aptasensor based on a self-assembled core-shell structured Ag@Au IP6 bifunctional nanozyme

A sensitive and accurate assay of aflatoxin B1 (AFB1) is critically important to ensure food safety. This work designed a dual-mode aptasensor for the convenient and sensitive detection of AFB1 in foodstuff. The aptasensor based on a bifunctional nanozymes was prepared by combining the hybridization chain reaction (HCR) amplification and alkaline phosphatase (ALP)-induced self-assembly reaction. The Ag@Au IP6 nanozyme demonstrated better peroxidase-like activity, effectively initiating the TMB−H2O2 color reaction and facilitating the generation of the blue oxidation product oxTMB. Furthermore, Ag@Au IP6 as a surface-enhanced Raman scattering (SERS) substrate featuring a core-shell structure can notably enhance the Raman signal of oxTMB. When AFB1 existed, the trigger probe exposed and initiated HCR, leading to the introduction of ALP, consequently mediating the generation of Ag@Au IP6 nanozymes, enhancing both SERS signal and colorimetric signal in the TMB-H2O2 system. Consequently, the dual-mode aptasensor is capable of achieving SERS/colorimetric detection with no need for the modification of signal molecules and the replacement of material or reagent. In on-site detection, the visual sensing assay could achieve with collecting and transforming the colorimetric signal to RGB value by a color-assist App in smartphones. Within optimal conditions, the detection limit of dual-mode aptasensor as low as 0.58 pg/L, and with a linear range from 2 pg/L to 200 pg/L, which can meet the needs for AFB1 precise quantification and on-site detection.

Surface-Enhanced Raman Scattering Sensors Employing a Nanoparticle-On-Liquid-Mirror (NPoLM) Architecture.

Surface-enhanced Raman scattering (SERS) sensors typically employ nanophotonic structures that support high-field confinement and enhancement in hotspots to increase the Raman scattering from target molecules by orders of magnitude. In general, high field and SERS enhancement can be achieved by reducing the critical dimensions and mode volumes of the hotspots to nanoscale. To this end, a multitude of SERS sensors employing photonic structures with nanometric hotspots have been demonstrated. However, delivering analyte molecules into nanometric hotspots is challenging, and the trade-off between field confinement/enhancement and analyte delivery efficiency is a critical limiting factor for the performance of many nanophotonic SERS sensors. Here, a new type of SERS sensor employing solid-metal nanoparticles and bulk liquid metal is demonstrated to form nanophotonic resonators with a nanoparticle-on-liquid-mirror (NPoLM) architecture, which effectively resolves this trade-off. In particular, this unconventional sensor architecture allows for the convenient formation of nanometric hotspots by introducing liquid metal after analyte molecules are efficiently delivered to the surface of gold nanoparticles. In addition, a cost-effective and reliable process is developed to produce gold nanoparticles on a substrate suitable for forming NPoLM structures. These NPoLM structures achieve two orders of magnitude higher SERS signals than the gold nanoparticles alone.

Cation Chain Length of Nonhalogenated Ionic Liquids Matters in Enhancing SERS of Cytochrome c on Zr-Al-Co-O Nanotube Arrays.

Surface-enhanced Raman scattering (SERS) is a remarkably powerful analytical technique enabling trace-level detection of biological molecules. The interaction of a probe molecule with the SERS substrate shows important distinctions in the SERS spectra, providing inherent fingerprint information on the probe molecule. Herein, nonhalogenated phosphonium-based ionic liquids (ILs) containing cations with varying chain lengths were used as trace additives to amplify the interaction between the cytochrome c (Cyt c) and Zr-Al-Co-O (ZACO) nanotube arrays, strengthening the SERS signals. An increased enhancement factor (EF) by 2.5-41.2 times compared with the system without ILs was achieved. The improvement of the SERS sensitivity with the introduction of these ILs is strongly dependent on the cation chain length, in which the increasing magnitude of EF is more pronounced in the system with a longer alkyl chain length on the cation. Comparing the interaction forces measured by Cyt c-grafted atomic force microscopy (AFM) probes on ZACO substrates with those predicted by the extended Derjaguin-Landau-Verwey-Overbeek (XDLVO) theory, the van der Waals forces became increasingly dominant as the chain length of the cations increased, associated with stronger Cyt c-ZACO XDLVO interaction forces. The major contributing component, van der Waals force, stems from the longer cation chains of the IL, which act as a bridge to connect Cyt c and the ZACO substrate, promoting the anchoring of the Cyt c molecules onto the substrate, thereby benefiting SERS enhancement.

A novel ratiometric aptasensor based on SERS for accurate quantification of cardiac troponin I

Cardiac troponin I (cTnI) as a biomarker of acute myocardial infarction (AMI) is directly related to myocardial damage. Here, we proposed a ratiometric aptamer-sensor (aptasensor) for quantifying cTnI based on surface-enhanced Raman scattering (SERS), in which the uniform and high-density gold array was decorated with highly specific aptamer Tro4 to form the capture substrate for target cTnI. Firstly, gold array was labeled with 5, 5’-dithio bis-(2-nitrobenzoic acid) (DTNB) as one SERS signal to effectively realize signal self-calibration. In addition, aptamer Tro6 targeting cTnI and 4-mercaptobenzoic acid (4-MBA) as another SERS signal were anchored to porous gold (pAu) to form a pAu signal probe. In the presence of cTnI, the capture substrate and pAu signal probes could build a typical sandwich structure, thus the ratio of SERS peak intensity (I4-MBA/IDTNB) could be used to quantify cTnI. The ratiometric aptasensor showed a good linearity from 0.001 to 100 ng mL−1 and a low detection limit down to 0.27 pg mL−1. Own to dual signal output and the gold array substrate, the aptasensor exhibited good reproducibility, high sensitivity and accuracy. When the aptasensor was applied to the quantification of cTnI in human serum samples, the detection performance was comparable to that of enzyme-linked immunosorbent assay (ELISA), proving that the sensor has a good prospect in the diagnosis of AMI disease.

Combinatorial Effect of Tricomponent Dual-Rim Nanoring Building Blocks: Label-Free SERS Detection of Biomolecules.

Detecting weakly adsorbing molecules via label-free surface-enhanced Raman scattering (SERS) has presented a significant challenge. To address this issue, we propose a novel approach for creating tricomponent SERS substrates using dual-rim nanorings (DRNs) made of Au, Ag, and CuO, each possessing distinct functionalities. Our method involves depositing different metals on Pt nanoring skeletons to obtain each nanoring with varying surface compositions while maintaining a similar size and shape. Next, the mixture of these nanorings is transferred into a monolayer assembly with homogeneous intermixing on a solid substrate. The surface of the CuO DRNs has dangling bonds (Cu2+) that facilitate the strong adsorption of carboxylates through the formation of chelating bonds, while the combination of Au and Ag DRNs significantly enhances the SERS signal intensity through a strong coupling effect. Notably, the tricomponent assemblies enable the successful SERS-based analysis of biomolecules such as amino acids, proteins, nucleobases, and nucleotides.

Surface-Enhanced Raman Scattering Based on Sb2S3 Microstructures via Femtosecond Laser Direct Writing.

The noble-metal-free surface-enhanced Raman scattering (SERS) substrates have gained significant attention due to their abundant sources, signal uniformity, biocompatibility, and chemical stability. However, the lack of controllable synthesis and fabrication methods for high-SERS-activity noble-metal-free substrates hinders their practical applications. In this study, we demonstrate the use of a femtosecond laser direct writing technique to precisely manipulate and modify microstructures, resulting in enhanced SERS signals from Sb2S3 nonmetal-oxide semiconductor materials. Compared with unpatterned Sb2S3 samples, the Sb2S3 microstructures exhibited up to a 16-fold increase in Raman scattering intensity. Interestingly, our results indicate that the femtosecond laser can induce a transformation in the crystalline state of Sb2S3 and significantly enhance the Raman spectrum signal within the Sb2S3 microstructures. This enhancement is also highly dependent on the period and depth of the microstructures, possibly due to the cavity effects, resulting in a stronger local field enhancement.

Dual-Modal Colorimetric and Surface-Enhanced Raman Scattering (SERS)-Based Lateral Flow Immunoassay for Ultrasensitive Detection of SARS-CoV-2 Using a Plasmonic Gold Nanocrown.

The 2019 coronavirus disease (COVID-19) outbreak created an unprecedented need for rapid, sensitive, and cost-effective point-of-care diagnostic tests to prevent and mitigate the spread of the SARS-CoV-2 virus. Herein, we demonstrated an advanced lateral flow immunoassay (LFIA) platform with dual-functional [colorimetric and surface-enhanced Raman scattering (SERS)] detection of the spike 1 (S1) protein of SARS-CoV-2. The nanosensor was integrated with a specially designed core-gap-shell morphology consisting of a gold shell decorated with external nanospheres, a structure referred to as gold nanocrown (GNC), labeled with a Raman reporter molecule 1,3,3,1',3',3'-hexamethyl-2,2'-indotricarbocyanine iodide (HITC) to produce a strong colorimetric signal as well as an enhanced SERS signal. Among the different plasmonics-active GNC nanostructures, the GNC-2 morphology, which has a shell decorated with an optimum number and size of nanospheres, produces an intense dark-blue colorimetric signal and ultrahigh SERS signal. The limit of detection (LOD) of the S1 protein via colorimetric detection LFIA was determined to be 91.24 pg/mL. On the other hand, the LOD for the SERS LFIA method was more than three orders of magnitude lower at 57.21 fg/mL. Furthermore, we analyzed the performance of the GNC-2 nanosensor for directly analyzing the S1 protein spiked in saliva samples without any sample pretreatment and achieving the LOD as low as 39.65 fg/mL using SERS-based plasmonics-enhanced LFIA, indicating ultrahigh detection sensitivity. Overall, our GNC nanosensor showed excellent sensitivity, reproducibility, and rapid detection of the SARS-CoV-2 S1 protein, demonstrating excellent potential as a promising point-of-care platform for the early detection of respiratory virus infections.

Development of surface-enhanced Raman scattering-sensing Method by combining novel Ag@Au core/shell nanoparticle-based SERS probe with hybridization chain reaction for high-sensitive detection of hepatitis C virus nucleic acid.

The ultrasensitive detection of hepatitis C virus (HCV) nucleic acid is crucial for the early diagnosis of hepatitis C. In this study, by combining Ag@Au core/shell nanoparticle (Ag@AuNP)-based surface-enhanced Raman scattering (SERS) tag with hybridization chain reaction (HCR), a novel SERS-sensing method was developed for the ultrasensitive detection of HCV nucleic acid. This SERS-sensing system comprised two different SERS tags, which were constructed by modifying Ag@AuNP with a Raman reporter molecule of 4-ethynylbezaldehyde, two different hairpin-structured HCR sequences (H1 or H2), and a detection plate prepared by immobilizinga capture DNA sequence onto the Ag@AuNP layer surface of the detection wells. When thetarget nucleic acid was present, the two SERS tags were captured on the surface of the Ag@AuNP-coated detection well to generate many "hot spots" through HCR, forming a strong SERS signal and realizing the ultrasensitive detection of thetarget HCV nucleic acid. The limit of detection of the SERS-sensing method for HCV nucleic acid was 0.47 fM, and the linear range was from 1 to 105 fM.

Ultrasensitive SERS quantitative detection of antioxidants via diazo derivatization reaction and deep learning for signal fluctuation mitigation

Synthetic antioxidants serve as essential protectors against oxidation and deterioration of edible oils, however, prudent evaluation is necessary regarding potential health risks associated with excessive intake. The direct adsorption of antioxidants onto conventional surface-enhanced Raman scattering (SERS) substrates is challenging due to the presence of phenolic hydroxyl groups in their molecular structures, resulting in weak Raman scattering signals and rendering direct SERS detection difficult. In this study, a diazo derivatization reaction was employed to enhance SERS signals by converting antioxidant molecules into azo derivatives, enabling the amplification of the weak Raman scattering signals through the strong vibrational modes induced by the N = N double bond. The resulting diazo derivatives were characterized using UV–visible absorption and infrared spectroscopy, confirming the occurrence of diazo derivatization of the antioxidants. The proposed method successfully achieved the rapid detection of three commonly used synthetic antioxidants, namely butylated hydroxyanisole (BHA), tert-butylhydroquinone (TBHQ), and propyl gallate (PG) on interfacial self-assembled gold nanoparticles. Furthermore, rapid predictions of BHA, PG, and TBHQ within the concentration range of 1 × 10−6 to 2 × 10−3 mol/L were achieved by integrating a convolutional neural network model. The predictive range of this model surpassed the traditional quantitative method of manually selecting characteristic peaks, with linear coefficients (R2) of 0.9992, 0.9997, and 0.9997, respectively. The recovery of antioxidants in real soybean oil samples ranged from 73.0 % to 126.4 %. Based on diazo derivatization, the proposed SERS method eliminates the need for complex substrates and enables the analysis and determination of synthetic antioxidants in edible oils within 20 min, providing a convenient analytical approach for quality control in the food industry.

Reversible Thermoelectric Regulation of Electromagnetic and Chemical Enhancement for Rapid SERS Detection.

Actively controlling surface-enhanced Raman scattering (SERS) performance plays a vital role in highly sensitive detection or in situ monitoring. Nevertheless, it is still challenging to achieve further modulation of electromagnetic enhancement and chemical enhancement simultaneously in SERS detection. In this study, a silver nanocavity structure with graphene as a spacer layer is coupled with thermoelectric semiconductor P-type gallium nitride (GaN) to form an electric-field-induced SERS (E-SERS) for dual enhancement. After applying the electric field, the intensity of SERS signals is further enhanced by over 10 times. The thermoelectric field enables fast and reproducible doping of graphene, thereby modulating its Fermi level over a wide range. The thermoelectric field also regulates the position of the plasmon resonance peak of the silver nanocavity structure, rendering synchronous dual electromagnetic and chemical regulation. Additionally, the method enables the trace detection of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). A detailed theoretical analysis is performed based on the experimental results and finite-element calculations, paving the way for the fabrication of high-efficient E-SERS substrates.

Purines recognition and quantitative analysis by surface-enhanced Raman spectroscopy

The common quantification methods of purines, including high-performance liquid chromatography, micellar electrokinetic chromatography, reverse phase ion pair chromatography, and capillary zone electrophoresis, have been used for the analysis of purines. These conventional techniques are limited by long operation times, large sample volumes, requirements for pretreatment and separation processes, or sophisticated, bulky and expensive equipment. Here, we have developed a simple method to prepare a probe for the quantitative analysis of purines using the surface-enhanced Raman scattering (SERS) method. The SERS probe is a rough Ag wire obtained with simple electrochemical treatment, which is optimized to reach the maximum SERS signal enhancement. The Raman enhancement factor (EF) of Ag wire after roughening can reach ∼106. Under optimized conditions, the rough Ag wire is capable of recognizing four purine bases (namely, guanine, adenine, hypoxanthine, and xanthine) in the range of 10−5 to 10−1 mg/mL with a linear relationship between SERS intensity of signature peak and purine concentration. The recovery rate of each purine base is higher than 80% in the mixture of four purines. The overall method was successfully applied to the monitoring of the level of purines in marketplace beer beverages. The novel wire-based SERS sensor used with portable Raman spectroscopy is prospective in diet safety and personalized point-of-care medical detection.

Recyclable Fe3O4@SiO2@PEI-DTC@Au-Ag nanocomposites as a SERS platform for sensitive detection of thiram on fruit surfaces

Equipped with surface-enhanced Raman scattering (SERS) effect and magnetic manipulation capacity, a new paradigm of recyclable SERS substrates based on Fe3O4 nanoparticles (NPs) @SiO2@PEI-DTC adhesive layer @Au-Ag alloy quantum dots (QDs) were successfully prepared via engineering hydrothermal and seed deposition techniques. The SERS performance and uniformity of those substrates with different gold-silver (Au-Ag) weight ratios were evaluated by 4-aminothiophenol (4-ATP) molecules, revealing that the relative standard deviations (RSDs) of all substrates were less than 12 %, with the optimal SERS substrate achieving an enhancement factor (EF) of up to 1.39 × 105. This phenomenon can be attributed to the magnetic core and plasmonic resonance properties of Au-Ag alloy QDs, which result in abundant interparticle hotspots in the Fe3O4@SiO2@PEI-DTC@Au-Ag (FSPAA) nanocomposites. Furthermore, the optimal FSPAA nanocomposite was employed as a SERS substrate for rapid non-destructive detection of thiram on fruit surfaces. The SERS signal intensity exhibited a robust manifesting a linear association with thiram concentration within the span of 1 × 10−4 to 1 × 10−9 M, and the minimal detectable concentration was 1.04 × 10−10 M. The FSPAA core–shell nanocomposites exhibit high reusability and reliability and hold great promise for the practical applications in on-site assessment of food/environmental safety, as well as in spectroscopic identification of molecules adsorbed onto fruit surfaces.

Off-resonance high-performance surface-enhanced Raman scattering-active substrate by trapping gold nanoparticles using Bessel beam

The surface-enhanced Raman scattering (SERS) technique provides outstanding molecular fingerprint identification and high sensitivity of analytes. Herein, colloidal sphere-shaped gold nanoparticles (Au-NPs) trapped in concentric rings of the Bessel beam generated from the optical fiber-based negative axicon has been reported as a SERS substrate. With the trapping of Au-NPs, the SERS ability of colloidal Au-NPs improved, and the average enhancement factor (AEF) of the rhodamine-6G (R6G) and 4-aminothiophenol (4-ATP) molecules can reach up to the order of 107. Control experiments were also carried out with the trapping of Au-NPs by Gaussian beam illumination, without any illumination of the light and with the trapping of Au-NPs by the Bessel beam illumination on a silver (Ag)-coated silicon (Si) substrate with a self-assembled monolayer (SAM) of 4-ATP. Theoretical studies were also carried out using the finite element method (FEM) to identify the hotspots generated in the gaps formed between the Au-NPs, leading to an enhancement in the SERS signal of the molecules, and the results were consistent with the experimentally determined AEFs. The obtained results demonstrate that the proposed SERS technique is stable. This study has significant potential applications in clinical diagnosis, food safety, environment safety, chemical sensing, and biosensing.