Surface-enhanced Infrared Absorption Spectroscopy Research Articles

Surface-Enhanced Infrared Absorption Spectroscopy by Resonant Vibrational Coupling with Plasmonic Metal Oxide Nanocrystals.

Coupling between plasmonic resonances and molecular vibrations in nanocrystals (NCs) offers a promising approach for detecting molecules at low concentrations and discerning their chemical identities. Metallic NC superlattices can enhance vibrational signals under far-field detection by generating a myriad of intensified electric field hot spots between the NCs. Yet, their effectiveness is limited by the fixed electron concentration dictated by the metal composition and inefficient hot spot creation due to the large mode volume. Doped metal oxide NCs, such as tin-doped indium oxide (ITO), could overcome these limitations by enabling broad tunability of resonance frequencies in the mid-infrared range through independent variation of size and doping concentration. This study investigates the potential of close-packed ITO NC monolayers for surface-enhanced infrared absorption by quantifying trends in the coupling between their plasmon modes and various molecular vibrations. We show that maximum vibrational signal intensity occurs in monolayers composed of larger, more highly doped NCs, where the plasmon resonance peak lies at higher frequency than the molecular vibration. Using finite element and mutual polarization methods, we establish that near-field enhancement is stronger on the low-frequency side of the plasmon resonance and for more strongly coupled plasmonic NCs, thus rationalizing the design rules we experimentally uncovered. Our results can guide the development of optimal metal oxide NC-based superstructures for sensing target molecules or modifying their chemical properties through vibrational coupling.

A surface-enhanced infrared absorption spectroscopy (SEIRA) multivariate approach for atrazine detection

A green, fast and effective multivariate method for the determination of atrazine (ATZ) was developed using conventional infrared equipment furnished with an attenuated total reflectance module (ATR-IR), providing limit of detection (LOD) and limit of quantification (LOQ) in the ranges from 1.9 to 4.6 µg/mL and from 5.6 to 14 µg/mL, respectively. Furthermore, the surface-enhanced infrared absorption (SEIRA) approach was investigated to improve the sensitivity of the measurements and detect ATZ at low concentrations, addressing the compatibility with reference methods. To this end, a substrate formed by silver selenide quantum dots stabilized with mercaptopropionic acid (Ag2Se/MPA), synthesized in aqueous medium by an one-pot synthesis, was used. The spectral data were investigated by univariate and multivariate calibrations, allowing to calculate the enhancement factor (EF) and the multivariate enhancement factor (MEF), respectively. The SEIRA strategy proved to be able to enhance the atrazine signal up to 86-fold, allowing the detection of ATZ at concentrations as low as 0.001 µg/mL.

Sulfur-Bridged Asymmetric CuNi Bimetallic Atom Sites for CO2 Reduction with High Efficiency.

Double-atom catalysts (DACs) with asymmetric coordination are crucial for enhancing the benefits of electrochemical carbon dioxide reduction and advancing sustainable development, however, the rational design of DACs is still challenging. Herein, this work synthesizes atomically dispersed catalysts with novel sulfur-bridged Cu-S-Ni sites (named Cu-S-Ni/SNC), utilizing biomass wool keratin as precursor. The plentiful disulfide bonds in wool keratin overcome the limitations of traditional gas-phase S ligand etching process and enable the one-step formation of S-bridged sites. X-ray absorption spectroscopy (XAS) confirms the existence of bimetallic sites with N2Cu-S-NiN2 moiety. In H-cell, Cu-S-Ni/SNC shows high CO Faraday efficiency of 98.1% at -0.65V versus RHE. Benefiting from the charge tuning effect between the metal site and bridged sulfur atoms, a large current density of 550mAcm-2 can be achieved at -1.00V in flow cell. Additionally, in situ XAS, attenuated total reflection surface-enhanced infrared absorption spectroscopy (ATR-SEIRAS), and density functional theory (DFT) calculations show Cu as the main adsorption site is dual-regulated by Ni and S atoms, which enhances CO2 activation and accelerates the formation of *COOH intermediates. This kind of asymmetric bimetallic atom catalysts may open new pathways for precision preparation and performance regulation of atomic materials toward energy applications.

Uncovering the Dissociative Adsorption of the Leveler Janus Green B on Cu Electrodes at the Molecular Level.

The interfacial adsorption structure of an organic leveler decides its functionality in Cu interconnect electroplating and is yet far from clear. In this work, in situ attenuated total reflection surface-enhanced infrared absorption spectroscopy (ATR-SEIRAS) and electrochemical quartz crystal microbalance (EQCM) in conjunction with density functional theory (DFT) calculations are applied to unravel the interfacial adsorption of the classic dye leveler Janus Green B (JGB) at a Cu electrode and understand its polarization property against Cu electrodeposition from an adsorption structure perspective. ATR-SEIRAS measurements and DFT calculations reveal that the N=N bond of the JGB molecule splits via reductive hydrogenation, forming two fragments of contrasting adsorption configurations. JGB exhibits the strongest inhibition effect on Cu deposition among all the tested additives including individual and mixed fragments, due to the highest coverage of organic adsorbates from JGB dissociation, as measured by EQCM. This work highlights the advantage of surface sensitive analytical tools in understanding the structure-performance of levelers.

Electrochemical Synthesis of Urea: Co-Reduction of Nitrite and Carbon Dioxide on Binuclear Cobalt Phthalocyanine.

Exploration of molecular catalysts with the atomic-level tunability of molecular structures offers promising avenues for developing high-performance catalysts for the electrochemical co-reduction reaction of carbon dioxide (CO2) and nitrite (NO2 -) into value-added urea. In this work, a binuclear cobalt phthalocyanine (biCoPc) catalyst is prepared through chemical synthesis and applied as a C─N coupling catalyst toward urea. Achieving a remarkable Faradaic efficiency of 47.4% for urea production at -0.5V versus reversible hydrogen electrode (RHE), this biCoPc outperforms many known molecular catalysts in this specific application. Its unique planar macromolecular structure and the increased valence state of cobalt promote the adsorption of nitrogenous and carbonaceous species, a critical factor in facilitating the multi-electron C─N coupling. Combining highly sensitive in situ attenuated total reflection surface-enhanced infrared absorption spectroscopy (ATR-SEIRAS) with density functional theory (DFT) calculations, the linear adsorbed CO (COL) and bridge adsorbed CO (COB) is captured on biCoPc catalyst during the co-reduction reaction. COB, a pivotal intermediate in the co-reduction from CO2 and nitrite to urea, is evidenced to be labile and may be attacked by nitrite, promoting urea production. This work demonstrates the importance of designing molecular catalysts for efficient co-reduction of CO2 and nitrite to urea.

A supported Ni2 dual-atoms site hollow urchin-like carbon catalyst for synergistic CO2 electroreduction

Dual-atoms catalysts (DACs), while inheriting the advantages of maximum atom utilization ratio and excellent selectivity of single-atom catalysts (SACs), can better enhance the catalytic activity through the synergy of adjacent atoms. Therefore, DACs are considered to be very potential catalysts for CO2 to CO conversion. Its catalytic activity is greatly influenced by the coordination environment and morphology. Here, hollow urchin-like NiNC catalysts (Ni-NC(HU)-x, x = 100, 50, 25, 0) were synthesized using urchin-like nickel particles as template. By adjusting the amount of additional nitrogen source, the percentage content of pyridinic-N was adjusted as well as further affecting the coordination environment. Among them, Ni-NC(HU)-50, which had the highest content of pyridinic-N, formed a dual-atoms coordination structure and had the best catalytic performance that the CO Faradaic efficiency (FECO) reached 97.2 % at −0.9 V vs. reversible hydrogen electrode (RHE) and sustained above 95 % within 50 h. In-situ attenuated total reflectance surface-enhanced infrared absorption spectroscopy (ATR-SEIRAS) and density functional theory (DFT) calculations showed that Ni-NC(HU)-50 exhibited the best performance of CO2 reduction reaction (CO2RR) by lowering the *COOH formation free energy barrier and its favorable dual desorption mechanism of *COL and *COB.

Catalytic Peculiarity of Alkali Metal Cation-Free Electrode/Polyelectrolyte Interfaces Toward CO2 Reduction.

A prominent feature of modern electrochemical technologies, such as fuel cells and electrolysis, is the employing of polyelectrolytes instead of liquid electrolytes. Unlike the well-studied electrode/liquid electrolyte interfaces, however, the catalytic characteristics of electrode/polyelectrolyte interfaces remain largely unexplored, mostly due to the lack of reliable probing methods. Herein, we report a universally applicable approach to investigating electrocatalytic reactions at electrode/polyelectrolyte interfaces under normal electrochemical conditions. By coating a thin layer of anion-exchange membrane (AEM) onto the electrode surface, solutions with bulky organic cations were well separated, thus a pure electrode/polyelectrolyte interface can be established in a regular electrochemical setup and studied using in situ spectroscopies, e.g., attenuated total reflectance surface-enhanced infrared absorption spectroscopy (ATR-SEIRAS). We found that the blank Au surface was inert toward the CO2 reduction reaction (CO2RR) in the absence of alkali metal cations, whereas coating with an AEM can dramatically turn on the catalytic activity. ATR-SEIRAS revealed that the hydrogen bond network of water at the Au/AEM interface was enhanced in comparison to that on the blank Au surface, which facilitated the hydrogenation process of the CO2RR. These findings further our fundamental understanding of the catalytic behavior of electrode/polyelectrolyte interfaces and benefit the development of relevant electrochemical technologies.

Insights into Electrochemical CO2 Reduction on Metallic and Oxidized Tin Using Grand-Canonical DFT and In Situ ATR-SEIRA Spectroscopy.

Electrochemical CO2 reduction (CO2R) to formate is an attractive carbon emissions mitigation strategy due to the existing market and attractive price for formic acid. Tin is an effective electrocatalyst for CO2R to formate, but the underlying reaction mechanism and whether the active phase of tin is metallic or oxidized during reduction is openly debated. In this report, we used grand-canonical density functional theory and attenuated total reflection surface-enhanced infrared absorption spectroscopy to identify differences in the vibrational signatures of surface species during CO2R on fully metallic and oxidized tin surfaces. Our results show that CO2R is feasible on both metallic and oxidized tin. We propose that the key difference between each surface termination is that CO2R catalyzed by metallic tin surfaces is limited by the electrochemical activation of CO2, whereas CO2R catalyzed by oxidized tin surfaces is limited by the slow reductive desorption of formate. While the exact degree of oxidation of tin surfaces during CO2R is unlikely to be either fully metallic or fully oxidized, this study highlights the limiting behavior of these two surfaces and lays out the key features of each that our results predict will promote rapid CO2R catalysis. Additionally, we highlight the power of integrating high-fidelity quantum mechanical modeling and spectroscopic measurements to elucidate intricate electrocatalytic reaction pathways.

Spectroscopic studies under properties of chlorpromazine conjugated to gold nanoparticles

Scientific studies have demonstrated that conjugates of anticancer drugs with metal nanoparticles (MeNPs) lead to a more effective deactivation of tumor cells compared to free drugs. Similarly, it has been established that conjugates of antibiotics with MeNPs exhibit higher biocidal activity against bacteria than their unbound counterparts. However, limited information is available regarding conjugates formed from drugs other than anticancer and antibiotics. Therefore, our research aims to develop synthesis methods for conjugates of chlorpromazine (CPZ), a neuroleptic, with gold nanoparticles (AuNPs). CPZ-AuNP conjugates were prepared through a ligand exchange reaction conducted on the surface of quasi-spherical, negatively charged citrate-stabilized TC-AuNPs with an average size of 55 ± 5 nm. UV–vis spectroscopy was employed to determine the stability range of the conjugates under controlled conditions of pH and ionic strength. Based on electrokinetic measurements, it was observed that the zeta potential of CPZ-AuNP conjugates strongly depends on the amount of CPZ adsorbed on the TC-AuNP surface. Additionally, the conjugates exhibited an isoelectric point at pH 8.8. Surface-enhanced Raman spectroscopy (SERS) and surface-enhanced infrared absorption spectroscopy (SEIRA) were employed to elucidate the adsorption structure of CPZ on TC-AuNPs. The interpretation of the spectra was conducted based on the Raman and FTIR spectra of CPZ, along with calculations performed using Density Functional Theory (DFT). The results indicated that CPZ primarily interacts with the TC-AuNP surface through the angularly oriented phenothiazine ring and the propylene bridge. Furthermore, it was demonstrated that the C-N-C fragment is perpendicular to the surface of the TC-AuNP with which it interacts. The findings from this analysis suggest the potential for further research on the use of these conjugates in biomedical applications.

How valinomycin transports water across the bilayer: effect of the cation in the electrolyte

Surface-enhanced infrared absorption spectroscopy (SEIRAS) was employed to investigate the structure of the interfacial water in the 1,2-diphytanoyl-sn-glycero-3-phosphocholine (DPhPC)/valinomycin floating bilayer on the gold surface in two electrolytes with different cations, KClO4 and NaClO4. The SEIRAS studies indicate that interfacial water adopts different structures in the bilayer with different cations. The structure of interfacial water in the DPhPC/valinomycin bilayer in the NaClO4 solution is similar to water in the DPhPC bilayer (without valinomycin), while the structure of water in the bilayer in the KClO4 solution has a high amount of disordered hydrogen bond network. The results of the present study confirm that valinomycin selectively transports K+ across the lipid bilayer as an ion pair and that the ion pair is bonded to residual water that is released into the submembrane region.

Enhanced Electrochemical CO2 Reduction to Formate over Phosphate-Modified In: Water Activation and Active Site Tuning.

Electrochemical CO2 reduction reaction (CO2RR) offers a sustainable strategy for producing fuels and chemicals. However, it suffers from sluggish CO2 activation and slow water dissociation. In this work, we construct a (P-O)δ- modified In catalyst that exhibits high activity and selectivity in electrochemical CO2 reduction to formate. A combination of in situ characterizations and kinetic analyses indicate that (P-O)δ- has a strong interaction with K+(H2O)n, which effectively accelerates water dissociation to provide protons. In situ attenuated total reflectance surface-enhanced infrared absorption spectroscopy (ATR-SEIRAS) measurements together with density functional theory (DFT) calculations disclose that (P-O)δ- modification leads to a higher valence state of In active site, thus promoting CO2 activation and HCOO* formation, while inhibiting competitive hydrogen evolution reaction (HER). As a result, the (P-O)δ- modified oxide-derived In catalyst exhibits excellent formate selectivity across a broad potential window with a formate Faradaic efficiency as high as 92.1 % at a partial current density of ~200 mA cm-2 and a cathodic potential of -1.2 V vs. RHE in an alkaline electrolyte.

Highly sensitive and label-free protein immunoassay-based biosensor comprising infrared metamaterial absorber inducing strong coupling

A mid-infrared label-free immunoassay-based biosensor is an effective device to help identify and quantify biomolecules. This biosensor employs a surface-enhanced infrared absorption spectroscopy, which is a highly potent sensing technique for detecting minute quantities of analytes. In this study, a biosensor was constructed using a metamaterial absorber, which facilitated strong coupling effects. For maximum coupling effect, it is necessary to enhance the near-field intensity and the spatial and spectral overlap between the optical cavity resonance and the vibrational mode of the analyte. Due to significant peak splitting, conventional baseline correction methods fail to adequately analyze such a coupling system. Therefore, we employed a coupled harmonic oscillation model to analyze the spectral distortion resulting from the peak splitting induced by the strong coupling effect. The proposed biosensor with a thrombin-binding aptamer-based immunoassay could achieve a limit of detection of 267.4 pM, paving the way for more efficient protein detection in clinical practice.

Enhancing Electrocatalytic CO2-to-CO Conversion by Weakening CO Binding through Nitrogen Integration in the Metallic Fe Catalyst.

Metallic iron (Fe) typically demonstrates the unfavorable catalytic activity for the CO2 reduction reaction (CO2RR), mainly attributed to the excessively strong binding of CO products on Fe sites. Toward this end, we employed an effective approach involving electronic structure modulation through nitrogen (N) integration to enhance the performance of the CO2RR. Here, an efficient catalyst has been developed, composed of N-doped metallic iron (Fe) nanoparticles encapsulated in a porous N-doped carbon framework. Notably, this N-integrated Fe catalyst displays significantly enhanced performance in the electrocatalytic reduction of CO2, yielding the highest CO Faradaic efficiency of 97.5% with a current density of 6.68 mA cm-2 at -0.7 V versus the reversible hydrogen electrode. The theoretical calculations, combined with the in situ attenuated total reflection surface-enhanced infrared absorption spectroscopy study, reveal that N integration modulates the electron density around Fe, resulting in the weakening of the binding strength between the Fe active sites and *CO intermediates, consequently promoting the desorption of CO and the overall CO2RR process.

Tailoring the catalytic microenvironment of CuO with hydrophobic CuSA2 for selective CO2 electroreduction to C2+ products

Advancing the Faraday efficiency (FE) and current density of Cu catalyzed electrochemical CO2 reduction (ECR) reaction to produce C2+ products is important for its practical applications. Constructing a hydrophobic interface to regulate the local reaction environment is an effective method to improve the selectivity of C2+ products, but it is limited by the low reaction current density. In this work, we fabricated a novel hydrophobic and ECR active copper stearate (CuSA2) decorated CuO nanoparticle catalyst (CuO/CuSA2) for ECR reaction toward C2+ products. As a result, the CuO/CuSA2 catalyst achieved an FE of 61.33 % and a partial current density of 429.33 mA cm−2 for C2+ products. The CuSA2 and CuO nanoparticle cooperate very well for the formation of C2+ products. The in-situ attenuated total reflectance surface-enhanced infrared absorption spectroscopy (ATR-SEIRAS) and electrochemical adsorption experiment indicated that the hydrophobic CuSA2 regulated the local ECR reaction environment. The local ∗CO2.- and *CO adsorption were strengthened by hydrophobic CuSA2 modification while the H2O adsorption was inhibited. CuO nanoparticle promotes *CO coupling reaction and enhances C2 intermediates (*OCCOH and *OC2H5) adsorption. Hydrophobic CuSA2 and CuO nanoparticle synergistically promote the generation of C2+ products. This work provides new insights into the design of hydrophobic CO2 reduction electrocatalysts for the preparation of C2+ products.

Exploring the nanoscale: AFM-IR visualization of cysteine adsorption on gold nanoparticles

This study focuses on the adsorption process of L-cysteine (Cys), a sulfur-containing amino acid, onto monolayers of gold nanoparticles (AuNPs) prepared through distinct protocols on mica substrates. Two types of AuNPs were prepared using two different methods: the first employed a physical approach, which combined the Inert Gas Condensation (IGC) technique with the magnetron sputtering method, while the second utilized a chemical method involving the reduction of tetrachloroauric acid with trisodium citrate (TC). The characterization of AuNPs was performed using transmission electron microscopy (TEM) and atomic force microscopy (AFM), of up to 5 ± 1.3 nm for bare AuNPs obtained through vacuum techniques, and up to 12 ± 5 nm for negatively charged, citrate-stabilized TCAuNPs(−). The application of spectroscopic techniques based on the surface-enhanced effects allows for describing the adsorption process in both micro- and nanoscale systems: Cys/bare AuNPs and Cys/ TCAuNPs(−). The commonly used surface-enhanced Raman spectroscopy (SERS) technique provided insights into adsorption behaviours at the microscale level. In the case of TCAuNPs(−), an interaction involving the lone electron pair of sulfur (S) atom and metal surface, while on the bare AuNPs, S is adsorbed on the surface, but the cleavage of the SH group is not discernible. Nanoscale analysis was complemented using AFM combined with the surface-enhanced infrared absorption spectroscopy (AFM-SEIRA) technique. AFM-SEIRA map indicated the formation of hot spot which were predominantly located between aggregated TCAuNPs(−) and on specific NPs surfaces (area between NPs and gold-coated tip). Results from the SERS and AFM-SEIRA techniques were in good agreement, underscoring the comprehensive understanding achieved through the chosen experimental approach regarding the Cys interactions with layers of AuNPs.

Molecular tuning boosts asymmetric C-C coupling for CO conversion to acetate.

Electrochemical carbon dioxide/carbon monoxide reduction reaction offers a promising route to synthesize fuels and value-added chemicals, unfortunately their activities and selectivities remain unsatisfactory. Here, we present a general surface molecular tuning strategy by modifying Cu2O with a molecular pyridine-derivative. The surface modified Cu2O nanocubes by 4-mercaptopyridine display a high Faradaic efficiency of greater than 60% in electrochemical carbon monoxide reduction reaction to acetate with a current density as large as 380 mA/cm2 in a liquid electrolyte flow cell. In-situ attenuated total reflectance surface-enhanced infrared absorption spectroscopy reveals stronger *CO signal with bridge configuration and stronger *OCCHO signal over modified Cu2O nanocubes by 4-mercaptopyridine than unmodified Cu2O nanocubes during electrochemical CO reduction. Density function theory calculations disclose that local molecular tuning can effectively regulate the electronic structure of copper catalyst, enhancing *CO and *CHO intermediates adsorption by the stabilization effect through hydrogen bonding, which can greatly promote asymmetric *CO-*CHO coupling in electrochemical carbon monoxide reduction reaction.

Catalytic, Spectroscopic, and Theoretical Studies of Fe4S4-Based Coordination Polymers as Heterogenous Coupled Proton-Electron Transfer Mediators for Electrocatalysis.

Iron-sulfur clusters play essential roles in biological systems, and thus synthetic [Fe4S4] clusters have been an area of active research. Recent studies have demonstrated that soluble [Fe4S4] clusters can serve as net H atom transfer mediators, improving the activity and selectivity of a homogeneous Mn CO2 reduction catalyst. Here, we demonstrate that incorporating these [Fe4S4] clusters into a coordination polymer enables heterogeneous H atom transfer from an electrode surface to a Mn complex dissolved in solution. A previously reported solution-processable Fe4S4-based coordination polymer was successfully deposited on the surfaces of different electrodes. The coated electrodes serve as H atom transfer mediators to a soluble Mn CO2 reduction catalyst displaying good product selectivity for formic acid. Furthermore, these electrodes are recyclable with a minimal decrease in activity after multiple catalytic cycles. The heterogenization of the mediator also enables the characterization of solution-phase and electrode surface species separately. Surface enhanced infrared absorption spectroscopy (SEIRAS) reveals spectroscopic signatures for an in situ generated active Mn-H species, providing a more complete mechanistic picture for this system. The active species, reaction mechanism, and the protonation sites on the [Fe4S4] clusters were further confirmed by density functional theory calculations. The observed H atom transfer reactivity of these coordination polymer-coated electrodes motivates additional applications of this composite material in reductive H atom transfer electrocatalysis.

Controlling Interfacial Hydrogen Bonding at a Gold Surface: The Effect of Organic Cosolvents.

Water often serves as both a reactant and solvent in electrocatalytic reactions. Interfacial water networks can affect the transport and kinetics of these reactions, e.g., hydrogen evolution reaction and CO2 reduction reaction. Adding cosolvents that influence the hydrogen-bonding (H-bonding) environment, such as dimethyl sulfoxide (DMSO), has the potential to tune the reactivity of these important electrocatalytic reactions by regulating the interfacial local environment and water network. We investigate interfacial H-bonding networks in water-DMSO cosolvent mixtures on gold surfaces by using surface-enhanced infrared absorption spectroscopy and molecular dynamics simulations. Experiments and simulations show that the gold surface is enriched with dehydrated DMSO molecules and the mixture phase-separates to form water clusters. Simulations show a "buckled" water conformation at the surface, further constraining interfacial H-bonding. The small size of these water clusters and the energetically unfavorable H-bond conformations might inhibit H-bonding with bulk water, suppressing the proton diffusion required for efficient hydrogen evolution reaction processes.

Gradient High-Q Dielectric Metasurfaces for Broadband Sensing and Control of Vibrational Light-Matter Coupling.

Surface-enhanced infrared absorption spectroscopy (SEIRA) has emerged as a powerful technique for ultrasensitive chemical-specific analysis. SEIRA can be realized by employing metasurfaces that can enhance light-matter interactions in the spectral bands of molecular vibrations. Increasing sample complexity emphasizes the need for metasurfaces that can operate simultaneously at different spectral bands, both accessing rich spectral information over a broad band, and resolving subtle differences in the absorption fingerprints through narrow-band resonances. Here, a novel concept of resonance-gradient metasurfaces is introduced, where the required spectral selectivity is achieved via local high-quality-factor (high-Q) resonances, while the continuous coverage of a broad band is enabled by the gradual adjustment of the unit-cell dimensions along the planar structure. The highly tailorable design of the gradient metasurfaces provides flexibility for shaping the spectral sampling density to match the relevant bands of target analytes while keeping a compact device footprint. The versatility of the gradient metasurfaces is demonstrated through several sensing scenarios, including polymer mixture deconvolution, detecting a multistep bioassay, and identification of the onset of vibrational strong coupling regime. The proposed gradient-resonance platform significantly contributes to the rapidly evolving landscape of nonlocal metasurfaces, enabling applications in molecular detection and analysis of fundamental light-matter interaction phenomena.

ATR-SEIRAS Method to Measure Interfacial pH during Electrocatalytic Nitrate Reduction on Cu

This study reports the accuracy and applications of an attenuated total reflectance–surface-enhanced infrared absorption spectroscopy (ATR–SEIRAS) technique to indirectly measure the interfacial pH of the electrolyte within 10 nm of the electrocatalyst surface. This technique can be used in situ to study aqueous electrochemical reactions with a calibration range from pH 1–13, time resolution down to 4 s, and an average 95% confidence interval of 14% that varies depending on the pH region (acidic, neutral, or basic). The method is applied here to electrochemical nitrate reduction at a copper cathode to demonstrate its capabilities, but is broadly applicable to any aqueous electrochemical reaction (such as hydrogen evolution, carbon dioxide reduction, or oxygen evolution) and the electrocatalyst may be any SEIRAS-active thin film (e.g., silver, gold, or copper). The time-resolved results show a dramatic increase in the interfacial pH from pH 2–7 in the first minute of operation during both constant current and pulsed current experiments where the bulk pH is unchanged. Attempts to control the pH polarization at the surface by altering the electrochemical operating conditions—lowering the current or increasing the pulse frequency—showed no significant change, demonstrating the challenge of controlling the interfacial pH.