Surface-enhanced Infrared Absorption Spectroscopy Research Articles

Exploring the nanoscale: AFM-IR visualization of cysteine adsorption on gold nanoparticles

This study focuses on the adsorption process of L-cysteine (Cys), a sulfur-containing amino acid, onto monolayers of gold nanoparticles (AuNPs) prepared through distinct protocols on mica substrates. Two types of AuNPs were prepared using two different methods: the first employed a physical approach, which combined the Inert Gas Condensation (IGC) technique with the magnetron sputtering method, while the second utilized a chemical method involving the reduction of tetrachloroauric acid with trisodium citrate (TC). The characterization of AuNPs was performed using transmission electron microscopy (TEM) and atomic force microscopy (AFM), of up to 5 ± 1.3 nm for bare AuNPs obtained through vacuum techniques, and up to 12 ± 5 nm for negatively charged, citrate-stabilized TCAuNPs(−). The application of spectroscopic techniques based on the surface-enhanced effects allows for describing the adsorption process in both micro- and nanoscale systems: Cys/bare AuNPs and Cys/ TCAuNPs(−). The commonly used surface-enhanced Raman spectroscopy (SERS) technique provided insights into adsorption behaviours at the microscale level. In the case of TCAuNPs(−), an interaction involving the lone electron pair of sulfur (S) atom and metal surface, while on the bare AuNPs, S is adsorbed on the surface, but the cleavage of the SH group is not discernible. Nanoscale analysis was complemented using AFM combined with the surface-enhanced infrared absorption spectroscopy (AFM-SEIRA) technique. AFM-SEIRA map indicated the formation of hot spot which were predominantly located between aggregated TCAuNPs(−) and on specific NPs surfaces (area between NPs and gold-coated tip). Results from the SERS and AFM-SEIRA techniques were in good agreement, underscoring the comprehensive understanding achieved through the chosen experimental approach regarding the Cys interactions with layers of AuNPs.

Tailoring the catalytic microenvironment of CuO with hydrophobic CuSA2 for selective CO2 electroreduction to C2+ products

Advancing the Faraday efficiency (FE) and current density of Cu catalyzed electrochemical CO2 reduction (ECR) reaction to produce C2+ products is important for its practical applications. Constructing a hydrophobic interface to regulate the local reaction environment is an effective method to improve the selectivity of C2+ products, but it is limited by the low reaction current density. In this work, we fabricated a novel hydrophobic and ECR active copper stearate (CuSA2) decorated CuO nanoparticle catalyst (CuO/CuSA2) for ECR reaction toward C2+ products. As a result, the CuO/CuSA2 catalyst achieved an FE of 61.33 % and a partial current density of 429.33 mA cm−2 for C2+ products. The CuSA2 and CuO nanoparticle cooperate very well for the formation of C2+ products. The in-situ attenuated total reflectance surface-enhanced infrared absorption spectroscopy (ATR-SEIRAS) and electrochemical adsorption experiments indicated that the hydrophobic CuSA2 regulated the local ECR reaction environment. The local ∗CO2.- and *CO adsorption were strengthened by hydrophobic CuSA2 modification while the H2O adsorption was inhibited. CuO nanoparticle promotes *CO coupling reaction and enhances C2 intermediates (*OCCOH and *OC2H5) adsorption. Hydrophobic CuSA2 and CuO nanoparticle synergistically promote the generation of C2+ products. This work provides new insights into the design of hydrophobic CO2 reduction electrocatalysts for the preparation of C2+ products.

Molecular tuning boosts asymmetric C-C coupling for CO conversion to acetate.

Electrochemical carbon dioxide/carbon monoxide reduction reaction offers a promising route to synthesize fuels and value-added chemicals, unfortunately their activities and selectivities remain unsatisfactory. Here, we present a general surface molecular tuning strategy by modifying Cu2O with a molecular pyridine-derivative. The surface modified Cu2O nanocubes by 4-mercaptopyridine display a high Faradaic efficiency of greater than 60% in electrochemical carbon monoxide reduction reaction to acetate with a current density as large as 380 mA/cm2 in a liquid electrolyte flow cell. In-situ attenuated total reflectance surface-enhanced infrared absorption spectroscopy reveals stronger *CO signal with bridge configuration and stronger *OCCHO signal over modified Cu2O nanocubes by 4-mercaptopyridine than unmodified Cu2O nanocubes during electrochemical CO reduction. Density function theory calculations disclose that local molecular tuning can effectively regulate the electronic structure of copper catalyst, enhancing *CO and *CHO intermediates adsorption by the stabilization effect through hydrogen bonding, which can greatly promote asymmetric *CO-*CHO coupling in electrochemical carbon monoxide reduction reaction.

Enhanced Electrochemical CO2 Reduction to Formate over Phosphate-Modified In: Water Activation and Active Site Tuning.

Electrochemical CO2 reduction reaction (CO2RR) offers a sustainable strategy for producing fuels and chemicals. However, it suffers from sluggish CO2 activation and slow water dissociation. In this work, we construct a (P-O)δ- modified In catalyst that exhibits high activity and selectivity in electrochemical CO2 reduction to formate. A combination of in-situ characterizations and kinetic analyses indicate that (P-O)δ- has a strong interaction with K+(H2O)n, which effectively accelerates water dissociation to provide protons. In-situ attenuated total reflectance surface-enhanced infrared absorption spectroscopy (ATR-SEIRAS) measurements together with density functional theory (DFT) calculations disclose that (P-O)δ- modification leads to a higher valence state of In active site, thus promoting CO2 activation and HCOO* formation, while inhibiting competitive hydrogen evolution reaction (HER). As a result, the (P-O)δ- modified oxide-derived In catalyst exhibits excellent formate selectivity across a broad potential window with a formate Faradaic efficiency as high as 92.1% at a partial current density of ~200 mA cm-2 and a cathodic potential of -1.2 V vs. RHE in an alkaline electrolyte.

Catalytic, Spectroscopic, and Theoretical Studies of Fe4S4-Based Coordination Polymers as Heterogenous Coupled Proton-Electron Transfer Mediators for Electrocatalysis.

Iron-sulfur clusters play essential roles in biological systems, and thus synthetic [Fe4S4] clusters have been an area of active research. Recent studies have demonstrated that soluble [Fe4S4] clusters can serve as net H atom transfer mediators, improving the activity and selectivity of a homogeneous Mn CO2 reduction catalyst. Here, we demonstrate that incorporating these [Fe4S4] clusters into a coordination polymer enables heterogeneous H atom transfer from an electrode surface to a Mn complex dissolved in solution. A previously reported solution-processable Fe4S4-based coordination polymer was successfully deposited on the surfaces of different electrodes. The coated electrodes serve as H atom transfer mediators to a soluble Mn CO2 reduction catalyst displaying good product selectivity for formic acid. Furthermore, these electrodes are recyclable with a minimal decrease in activity after multiple catalytic cycles. The heterogenization of the mediator also enables the characterization of solution-phase and electrode surface species separately. Surface enhanced infrared absorption spectroscopy (SEIRAS) reveals spectroscopic signatures for an in situ generated active Mn-H species, providing a more complete mechanistic picture for this system. The active species, reaction mechanism, and the protonation sites on the [Fe4S4] clusters were further confirmed by density functional theory calculations. The observed H atom transfer reactivity of these coordination polymer-coated electrodes motivates additional applications of this composite material in reductive H atom transfer electrocatalysis.

Controlling Interfacial Hydrogen Bonding at a Gold Surface: The Effect of Organic Cosolvents.

Water often serves as both a reactant and solvent in electrocatalytic reactions. Interfacial water networks can affect the transport and kinetics of these reactions, e.g., hydrogen evolution reaction and CO2 reduction reaction. Adding cosolvents that influence the hydrogen-bonding (H-bonding) environment, such as dimethyl sulfoxide (DMSO), has the potential to tune the reactivity of these important electrocatalytic reactions by regulating the interfacial local environment and water network. We investigate interfacial H-bonding networks in water-DMSO cosolvent mixtures on gold surfaces by using surface-enhanced infrared absorption spectroscopy and molecular dynamics simulations. Experiments and simulations show that the gold surface is enriched with dehydrated DMSO molecules and the mixture phase-separates to form water clusters. Simulations show a "buckled" water conformation at the surface, further constraining interfacial H-bonding. The small size of these water clusters and the energetically unfavorable H-bond conformations might inhibit H-bonding with bulk water, suppressing the proton diffusion required for efficient hydrogen evolution reaction processes.

Gradient High-Q Dielectric Metasurfaces for Broadband Sensing and Control of Vibrational Light-Matter Coupling.

Surface-enhanced infrared absorption spectroscopy (SEIRA) has emerged as a powerful technique for ultrasensitive chemical-specific analysis. SEIRA can be realized by employing metasurfaces that can enhance light-matter interactions in the spectral bands of molecular vibrations. Increasing sample complexity emphasizes the need for metasurfaces that can operate simultaneously at different spectral bands, both accessing rich spectral information over a broad band, and resolving subtle differences in the absorption fingerprints through narrow-band resonances. Here, a novel concept of resonance-gradient metasurfaces is introduced, where the required spectral selectivity is achieved via local high-quality-factor (high-Q) resonances, while the continuous coverage of a broad band is enabled by the gradual adjustment of the unit-cell dimensions along the planar structure. The highly tailorable design of the gradient metasurfaces provides flexibility for shaping the spectral sampling density to match the relevant bands of target analytes while keeping a compact device footprint. The versatility of the gradient metasurfaces is demonstrated through several sensing scenarios, including polymer mixture deconvolution, detecting a multistep bioassay, and identification of the onset of vibrational strong coupling regime. The proposed gradient-resonance platform significantly contributes to the rapidly evolving landscape of nonlocal metasurfaces, enabling applications in molecular detection and analysis of fundamental light-matter interaction phenomena.

ATR-SEIRAS Method to Measure Interfacial pH during Electrocatalytic Nitrate Reduction on Cu

This study reports the accuracy and applications of an attenuated total reflectance–surface-enhanced infrared absorption spectroscopy (ATR–SEIRAS) technique to indirectly measure the interfacial pH of the electrolyte within 10 nm of the electrocatalyst surface. This technique can be used in situ to study aqueous electrochemical reactions with a calibration range from pH 1–13, time resolution down to 4 s, and an average 95% confidence interval of 14% that varies depending on the pH region (acidic, neutral, or basic). The method is applied here to electrochemical nitrate reduction at a copper cathode to demonstrate its capabilities, but is broadly applicable to any aqueous electrochemical reaction (such as hydrogen evolution, carbon dioxide reduction, or oxygen evolution) and the electrocatalyst may be any SEIRAS-active thin film (e.g., silver, gold, or copper). The time-resolved results show a dramatic increase in the interfacial pH from pH 2–7 in the first minute of operation during both constant current and pulsed current experiments where the bulk pH is unchanged. Attempts to control the pH polarization at the surface by altering the electrochemical operating conditions—lowering the current or increasing the pulse frequency—showed no significant change, demonstrating the challenge of controlling the interfacial pH.

Modulating surface microenvironment based on Ag-adorned CuO flower-liked nanospheres for strengthening C-‍C coupling during CO2RR

Modulating the surface microenvironment is crucial in strengthening CC coupling, leading to increasing selectivity in the production of multi-carbon (C2+) products during CO2 electroreduction. Herein, we have concentrated on investigating how to control the effect of surface distribution of active components of a series of Ag-decorated CuO, denoted as xAg/yCuO. These catalysts with similar chemical elements and morphology are designed, but they exhibit different selectivity in the CO2 electroreduction process. As a result, the Ag particles in 3Ag/CuO aggregates, while the Ag in 2Ag/2CuO and Ag/3CuO is uniformly distributed on the flower-like CuO nanosphere. Besides, 3Ag/CuO has the highest Faraday efficiency (FE) of CO with a value of 30.9 % at 0.8 V vs. RHE, demonstrating rich-Ag catalysts are beneficial to produce CO. 2Ag/2CuO shows excellent FEC2H4 of 51.4 % at -1.2 V vs. RHE due to the highly dispersed distribution of Ag on the flower-like CuO and higher vacancy O. Ag/3CuO exhibits higher FEH2 compared to other catalysts across a wide potential range, and its minimal impedance is attributed to its exceptional performance in the hydrogen evolution reaction. The proposed reaction pathway for the most effective catalysts 2Ag/2CuO, as determined by in-situ attenuated total reflectance surface-enhanced infrared absorption spectroscopy (ATR-SEIRAS), involves the following steps: CO2 →*CO2−→ *COOH → *CO→ *CHO→ *OCHCHO→ *OCHCH2→ C2H4. These findings demonstrate that controlling the surface structure can influence the local environment to enhance the efficiency of CO2 electroreduction.

Role of Electrolyte pH on Water Oxidation for Iridium Oxides.

Understanding the effect of noncovalent interactions of intermediates at the polarized catalyst-electrolyte interface on water oxidation kinetics is key for designing more active and stable electrocatalysts. Here, we combine operando optical spectroscopy, X-ray absorption spectroscopy (XAS), and surface-enhanced infrared absorption spectroscopy (SEIRAS) to probe the effect of noncovalent interactions on the oxygen evolution reaction (OER) activity of IrOx in acidic and alkaline electrolytes. Our results suggest that the active species for the OER (Ir4.x+-*O) binds much stronger in alkaline compared with acid at low coverage, while the repulsive interactions between these species are higher in alkaline electrolytes. These differences are attributed to the larger fraction of water within the cation hydration shell at the interface in alkaline electrolytes compared to acidic electrolytes, which can stabilize oxygenated intermediates and facilitate long-range interactions between them. Quantitative analysis of the state energetics shows that although the *O intermediates bind more strongly than optimal in alkaline electrolytes, the larger repulsive interaction between them results in a significant weakening of *O binding with increasing coverage, leading to similar energetics of active states in acid and alkaline at OER-relevant potentials. By directly probing the electrochemical interface with complementary spectroscopic techniques, our work goes beyond conventional computational descriptors of the OER activity to explain the experimentally observed OER kinetics of IrOx in acidic and alkaline electrolytes.

Diblock Copolymers of Methacryloyloxyethyl Phosphorylcholine and Dopamine Methacrylamide: Synthesis and Real-Time Adsorption Dynamics by SEIRAS and RAIRS.

Amphiphilic diblock copolymers containing a block of 2-methacryloyloxyethyl phosphorylcholine (MPC) with unique properties to prevent nonspecific protein adsorption and enhance lubrication in aqueous media and a block of dopamine methacrylamide (DOPMA) distinguished by excellent adhesion performance were synthesized by reversible addition fragmentation chain transfer (RAFT) polymerization for the first time. The DOPMA monomer with an acetonide-protected catechol group (acetonide-protected dopamine methacrylamide (ADOPMA)) was used, allowing the prevention of undesirable side reactions during polymerization and oxidation during storage. The adsorption behavior of the diblock copolymers with protected and unprotected catechol groups on gold surfaces was probed using attenuated total reflection (ATR)-Fourier transform infrared (FTIR) spectroscopy, surface-enhanced infrared absorption spectroscopy (SEIRAS), and reflection-absorption infrared spectroscopy (RAIRS). The copolymers pMPC-b-pADOPMA demonstrated physisorption with rapid adsorption and ultrasound-assisted desorption, while the copolymers pMPC-b-DOPMA exhibited chemical adsorption with slower dynamics but a stronger interaction with the gold surface. SEIRAS and RAIRS allowed proving the reorientation of the diblock copolymers during adsorption, demonstrating the exposure of the pMPC block toward the aqueous phase.

Novel water/oxygen cycle reaction photo fuel cell for solar conversion and pollutant detection: Based on selective 2-electron collaborative catalysis process

New typed photovoltaic devices, represented by water/oxygen cycle based photo fuel cells (PFCs) as a promising strategy to resolve the fossil energy crisis, have attracted extensive attention for the ideal photo energy conversion and utilization efficiency, spontaneous operation, and miniaturized devices. However, they still have limitations such as low oxygen reduction efficiency and poor stability caused by the complex structure of the cathode. In this work, a synergetic and fast 2-electron water/oxygen cycle reaction based dual-photoelectrode fuel cell (DPFC) is constructed with molecularly imprinted (MI)-CdS/ZnO nanorods (NRs) as photoanode and p-type organic semiconductor polythiophene (pTTh) as photocathode for the first time. The larger self-bias and simple structure endow the device higher open circuit potential (EOCV = 1.07 ± 0.08 V) and ideal output power density (Pmax = 60.5 ± 2.1 μW·cm−2). Attributed to the synergistic reaction effects, the 2-electron water/oxygen cycle is realized by the photocathode-generated H2O2 to serve as shuttle molecule, with outstanding cyclic stability (96 %) in 64 h continuous irradiation. Moreover, a portable self-powered sensor for the typical environmental pollutant atrazine is successfully developed based on this DPFC. A very wide concentration range (0.002 to 50 nM) and a super low detection limit (0.19 pM) is achived via a digital multimeter without the assistance of any signal amplifier. The mechanism, pathway, and active site of the selective reduction process are studied by the attenuated total reflection surface-enhanced infrared absorption spectroscopy (ATR-SEIRAS). This work has proposed a cheap and regulatable new way to convert and utilize solar energy and provided theoretical guidance for achieving economic power generation and the sensing strategy of self-powered sensors.

Plasmonic Fluorescence Sensors in Diagnosis of Infectious Diseases.

The increasing demand for rapid, cost-effective, and reliable diagnostic tools in personalized and point-of-care medicine is driving scientists to enhance existing technology platforms and develop new methods for detecting and measuring clinically significant biomarkers. Humanity is confronted with growing risks from emerging and recurring infectious diseases, including the influenza virus, dengue virus (DENV), human immunodeficiency virus (HIV), Ebola virus, tuberculosis, cholera, and, most notably, SARS coronavirus-2 (SARS-CoV-2; COVID-19), among others. Timely diagnosis of infections and effective disease control have always been of paramount importance. Plasmonic-based biosensing holds the potential to address the threat posed by infectious diseases by enabling prompt disease monitoring. In recent years, numerous plasmonic platforms have risen to the challenge of offering on-site strategies to complement traditional diagnostic methods like polymerase chain reaction (PCR) and enzyme-linked immunosorbent assays (ELISA). Disease detection can be accomplished through the utilization of diverse plasmonic phenomena, such as propagating surface plasmon resonance (SPR), localized SPR (LSPR), surface-enhanced Raman scattering (SERS), surface-enhanced fluorescence (SEF), surface-enhanced infrared absorption spectroscopy, and plasmonic fluorescence sensors. This review focuses on diagnostic methods employing plasmonic fluorescence sensors, highlighting their pivotal role in swift disease detection with remarkable sensitivity. It underscores the necessity for continued research to expand the scope and capabilities of plasmonic fluorescence sensors in the field of diagnostics.

Oxygen Vacancies Alter Methanol Oxidation Pathways on NiOOH.

A thorough comprehension of the mechanism underlying the methanol oxidation reaction (MOR) on Ni-based catalysts is critical for future electrocatalytic design and development. However, the mechanism of MOR on these materials remains a matter of controversy. Herein, we combine in situ surface-enhanced infrared absorption spectroscopy (SEIRAS) and density functional theory (DFT) calculations to identify the active sites and determine the mechanism of MOR on monometallic Ni-based catalysts in alkaline media. The SEIRAS results show that formate and (bi)carbonate are formed after the commencement of the MOR with potential-dependent relative distributions. These spectroscopic results are in good agreement with the DFT-computed reaction profiles over an oxygen vacancy, suggesting that the MOR mainly proceeds through the formate-involving pathway, in which the early consumption of methanol yields formate as the major product, while increasing potential drives further oxidation of formate to (bi)carbonate. We also find a parallel pathway for the generation of (bi)carbonate at high potentials that bypasses the formation of formate. The two main pathways are thermodynamically more feasible than the one predominantly reported in the literature for MOR on NiOOH that involves CHO and/or CO as key intermediates. These DFT results are supported by spectroscopic evidence showing that no band associated with CHO or CO can be detected by SEIRAS, which is attributed to the nature of the oxygen vacancies as the active sites, suppressing deep dehydrogenation of CH2O to CHO. This work thus shows the promising role of defect engineering in promoting the electrocatalytic MOR activity and selectivity.

Monitoring SEIRAS on a Graphitic Electrode for Surface-Sensitive Electrochemistry: Real-Time Electrografting.

The ubiquity of graphitic materials in electrochemistry makes it highly desirable to probe their interfacial behavior under electrochemical control. Probing the dynamics of molecules at the electrode/electrolyte interface is possible through spectroelectrochemical approaches involving surface-enhanced infrared absorption spectroscopy (SEIRAS). Usually, this technique can only be done on plasmonic metals such as gold or carbon nanoribbons, but a more convenient substrate for carbon electrochemical studies is needed. Here, we expanded the scope of SEIRAS by introducing a robust hybrid graphene-on-gold substrate, where we monitored electrografting processes occurring at the graphene/electrolyte interface. These electrodes consist of graphene deposited onto a roughened gold-sputtered internal reflection element (IRE) for attenuated total reflectance (ATR) SEIRAS. The capabilities of the graphene-gold IRE were demonstrated by successfully monitoring the electrografting of 4-amino-2,2,6,6-tetramethyl-1-piperidine N-oxyl (4-amino-TEMPO) and 4-nitrobenzene diazonium (4-NBD) in real time. These grafts were characterized using cyclic voltammetry and ATR-SEIRAS, clearly showing the 1520 and 1350 cm-1 NO2 stretches for 4-NBD and the 1240 cm-1 C-C, C-C-H, and N-Ȯ stretch for 4-amino-TEMPO. Successful grafts on graphene did not show the SEIRAS effect, while grafting on gold was not stable for TEMPO and had poorer resolution than on graphene-gold for 4-NBD, highlighting the uniqueness of our approach. The graphene-gold IRE is proficient at resolving the spectral responses of redox transformations, unambiguously demonstrating the real-time detection of surface processes on a graphitic electrode. This work provides ample future directions for real-time spectroelectrochemical investigations of carbon electrodes used for sensing, energy storage, electrocatalysis, and environmental applications.

Multi-band Metasurface-Driven Surface-Enhanced Infrared Absorption Spectroscopy for Improved Characterization of in-Situ Electrochemical Reactions.

Surface-enhanced spectroscopy techniques are the method-of-choice to characterize adsorbed intermediates occurring during electrochemical reactions, which are crucial in realizing a green and sustainable future. Characterizing species with low coverage or short lifetimes has so far been limited by low signal enhancement. Recently, single-band metasurface-driven surface-enhanced infrared absorption spectroscopy (SEIRAS) has been pioneered as a promising technology to monitor a single vibrational mode during electrochemical CO oxidation. However, electrochemical reactions are complex, and their understanding requires the simultaneous monitoring of multiple adsorbed species in situ, hampering the adoption of nanostructured electrodes in spectro-electrochemistry. Here, we develop a multi-band nanophotonic-electrochemical platform that simultaneously monitors in situ multiple adsorbed species emerging during cyclic voltammetry scans by leveraging the high resolution offered by the reproducible nanostructuring of the working electrode. Specifically, we studied the electrochemical reduction of CO2 on a Pt surface and used two separately tuned metasurface arrays to monitor two adsorption configurations of CO with vibrational bands at ∼2030 and ∼1840 cm-1. Our platform provides a ∼40-fold enhancement in the detection of characteristic absorption signals compared to conventional broadband electrochemically roughened platinum films. A straightforward methodology is outlined starting with baselining our system in a CO-saturated environment and clearly detecting both configurations of adsorption. In contrast, during the electrochemical reduction of CO2 on platinum in K2CO3, CO adsorbed in a bridged configuration could not be detected. We anticipate that our technology will guide researchers in developing similar sensing platforms to simultaneously detect multiple challenging intermediates, with low surface coverage or short lifetimes.

Mechanistic insights into C-C coupling in electrochemical CO reduction using gold superlattices

Developing in situ/operando spectroscopic techniques with high sensitivity and reproducibility is of great importance for mechanistic investigations of surface-mediated electrochemical reactions. Herein, we report the fabrication of highly ordered rhombic gold nanocube superlattices (GNSs) as substrates for surface-enhanced infrared absorption spectroscopy (SEIRAS) with significantly enhanced SEIRA effect, which can be controlled by manipulating the randomness of GNSs. Finite difference time domain simulations reveal that the electromagnetic effect accounts for the significantly improved spectroscopic vibrations on the GNSs. In situ SEIRAS results show that the vibrations of CO on the Cu2O surfaces have been enhanced by 2.4 ± 0.5 and 18.0 ± 1.3 times using GNSs as substrates compared to those on traditional chemically deposited gold films in acidic and neutral electrolytes, respectively. Combined with isotopic labeling experiments, the reaction mechanisms for C-C coupling of CO electroreduction on Cu-based catalysts are revealed using the GNSs substrates.

Nanostructured Black Silicon as a Stable and Surface-Sensitive Platform for Time-Resolved In Situ Electrochemical Infrared Absorption Spectroscopy.

Attenuated total reflection surface-enhanced infrared absorption spectroscopy (ATR-SEIRAS) is a powerful method for probing interfacial chemical processes. However, SEIRAS-active nanostructured metallic thin films for the in situ analysis of electrochemical phenomena are often unstable under biased aqueous conditions. In this work, we present a surface-enhancing structure based on etched black Si internal reflection elements with Au-coatings for in situ electrochemical ATR-SEIRAS. Using electrochemical potential-dependent adsorption and desorption of 4-methoxypyridine on Au, we demonstrate that black Si-based substrates offer advantages over commonly used structures, such as electroless-deposited Au on Si and electrodeposited Au on ITO-coated Si, due to the combination of high stability, sensitivity, and conductivity. These characteristics are especially valuable for time-resolved measurements where stable substrates are required over extended times. Furthermore, the low sheet resistance of Au layers on black Si reduces the RC time constant of the electrochemical cell, enabling a significantly higher time resolution compared to that of traditional substrates. Thus, we employ black Si-based substrates in conjunction with rapid- and step-scan Fourier transform infrared (FTIR) spectroscopy to investigate the adsorption and desorption kinetics of 4-methoxypyridine during in situ electrochemical potential steps. Adsorption is shown to be diffusion-limited, which allows for the determination of the mean molecular area in a fully established monolayer. Moreover, no significant changes in the peak ratios of vibrational modes with different orientations relative to the molecular axis are observed, suggesting a single adsorption mode and no alteration of the average molecular orientation during the adsorption process. Overall, this study highlights the enhanced performance of black Si-based substrates for both steady-state and time-resolved in situ electrochemical ATR-SEIRAS, providing a powerful platform for kinetic and mechanistic investigations of electrochemical interfaces.

Kinetics Conditioning of (Electro) Chemically Stable Zn Anode with pH Regulation Toward Long-Life Zn-Storage Devices.

The safety, low cost, and high power density of aqueous Zn-based devices (AZDs) appeal to large-scale energy storage. Yet, the presence of hydrogen evolution reaction (HER) and chemical corrosion in the AZDs leads to local OH- concentration increasement and the formation of Znx SOy (OH)z •nH2 O (ZHS) by-products at the Zn/electrolyte interface, causing instability and irreversibility of the Zn-anodes. Here, a strategy is proposed to regulate OH- by introducing a bio-sourced/renewable polypeptide (ɛ-PL) as a pH regulator in electrolyte. The consumption of OH- species is evaluated through in vitro titration and cell in vivo in situ attenuated total reflection surface-enhanced infrared absorption spectroscopy at a macroscopic and molecular level. The introduction of ɛ-PL is found to significantly suppress the formation of ZHS and associated side reactions, and reduce the local coordinated H2 O of the Zn2+ solvation shell, widening electrochemical stable window and suppressing OH- generation during HER. As a result, the inclusion of ɛ-PL improves the cycle time of Zn/Zn symmetrical cells from 15 to 225h and enhances the cycle time of aqueous Zn- I2 cells to 1650h compared to those with pristine electrolytes. This work highlights the potential of kinetical OH- regulation for by-product and dendrite-free AZDs.

Effective free-standing electrodes with refined structure via sputtering Ti sublayer and altering working pressure for electrocatalytic benzaldehyde hydrogenation

Highly effective free-standing electrocatalysts are demanded to reduce biomass-oriented aldehydes to alcohols. Magnetron sputtering is efficient to produce film-based catalysts, but depositing transition metals on carbon fiber paper (CFP) faces the challenge of weak adhesion. Here we introduced a strategy with sputtered Ti as a sublayer to enhance the adhesion between Ni and CFP, and systematically studied the changes in morphology and catalytic performances. Different from the dense structure of Ni directly sputtered on CFP, the Ni on Ti sublayer demonstrates a column-channel architecture, and shows fast electron/ion transfer and stable structure during the reaction. Moreover, the microstructure of Ni film was further modified by regulating the working pressure during sputtering. The enhanced electrocatalytic performance with Ti sublayer is ascribed to the higher adhesion strength, the faster electron/ion transfer and the enriched local concentration of hydronium ions, which are confirmed by electrochemical impedance spectroscopy and in-situ surface-enhanced infrared absorption spectroscopy.