Surface Energy Research Articles

$$\varvec{\Gamma }$$-Convergence and Stochastic Homogenization of Second-Order Singular Perturbation Models for Phase Transitions

AbstractWe study the effective behavior of random, heterogeneous, anisotropic, second-order phase transitions energies that arise in the study of pattern formations in physical–chemical systems. Specifically, we study the asymptotic behavior, as $$\varepsilon $$ ε goes to zero, of random heterogeneous anisotropic functionals in which the second-order perturbation competes not only with a double well potential but also with a possibly negative contribution given by the first-order term. We prove that, under suitable growth conditions and under a stationarity assumption, the functionals $$\Gamma $$ Γ -converge almost surely to a surface energy whose density is independent of the space variable. Furthermore, we show that the limit surface density can be described via a suitable cell formula and is deterministic when ergodicity is assumed.

Impacts of terrestrial mammalian herbivores on vegetation change in the arctic

AbstractThere are increasing concerns about regional ecosystem shifts in the Arctic due to climate change. Notably, warming-induced increases in Arctic vegetation cover can have important consequences for surface energy balance, habitat changes, permafrost, and more. Mammalian herbivory is an important potential force to counteract this effect. In this systematic literature review, we examine the role of terrestrial mammalian herbivory on warming-induced increases in Arctic vegetation. We analyse the effects of terrestrial mammalian herbivory on vegetation cover, abundance, growth, survival, and ecosystem productivity. Our results show that herbivory has an overall significant negative influence on Arctic vegetation, particularly on vegetation biomass, growth, and productivity, as indicated by the Normalised Difference Vegetation Index (NDVI). Importantly, we demonstrated a significant role of herbivores in controlling carbon dioxide exchange and carbon uptake, whilst acknowledging that the relationship between herbivory and ecosystem productivity is highly complex and site-dependent. Our results confirm the important role that herbivory can play in buffering observed and predicted warming-induced Arctic vegetation increases. We also find that this is strongly affected by plant palatability, trampling occurrence, and herbivore density. Graphical Abstract

How Does Turbulent Organized Structure Influence Surface Energy Balance Closure? A Study Utilizing Large-Eddy Simulation

How Does Turbulent Organized Structure Influence Surface Energy Balance Closure? A Study Utilizing Large-Eddy Simulation

Quantifying the Cooling Effect of Urban Greening Driven by Ecological Restoration Projects in China.

Urban greening (UG) affects local climate by altering surface energy balance, while long-term UG cooling potential, patterns, and contribution to curbing urban warming remain unclear. Here, we designed an novel statistical model to evaluate the cooling potential of UG (CPUG) and created the first CPUG map for China. By exploring the trends in observed and simulated urban surface temperatures (UST), we quantified the CPUG of 0.20 K over the past two decades, which slowed down the warming trend by 14.17% in Chinese cities. We found that the CPUG varied significantly between the urban core and sprawl areas. Specifically, the CPUG in the urban core was approximately 1.01 K, and it contributed to curbing urban warming by 56.08%, which was more than 7.2 times higher than in the sprawl areas, where the CPUG was only 0.14 K and contributed to curbing urban warming by 9.93%. We further revealed that urbanization and major ecological restoration projects are the key factors influencing CPUG, emphasizing the need for anthropogenic vegetation management to curb urban warming. The proposed model in this study provides a powerful tool for quantitatively assessing the impact of long-term UG trends on urban warming. The results of the study are an important reference for building climate-adaptive cities.

Multi‐Material Gradient Printing Using Meniscus‐enabled Projection Stereolithography (MAPS)

AbstractLight‐based additive manufacturing methods are widely used to print high‐resolution 3D structures for applications in tissue engineering, soft robotics, photonics, and microfluidics, among others. Despite this progress, multi‐material printing with these methods remains challenging due to constraints associated with hardware modifications, control systems, cross‐contamination, waste, and resin properties. Here, a new printing platform coined Meniscus‐enabled Projection Stereolithography (MAPS) is reported, a vat‐free method that relies on generating and maintaining a resin meniscus between a crosslinked structure and bottom window to print lateral, vertical, discrete, or gradient multi‐material 3D structures with no waste and user‐defined mixing between layers. MAPS is compatible with a wide range of resins shown and can print complex multi‐material 3D structures without requiring specialized hardware, software, or complex washing protocols. MAPS's ability to print structures with microscale variations in mechanical stiffness, opacity, surface energy, cell densities, and magnetic properties provides a generic method to make advanced materials for a broad range of applications.

Energy harvesting through the triboelectric nanogenerator (TENG) based on polyurethane/cellulose nanocrystal

This study investigates how physical and mechanical properties affect the performance of triboelectric nanogenerators (TENGs). Polyurethane (PU) was prepared using two methods: (i) one-step PU (non-chain extended polyurethane) and (ii) two-step PU (chain extended polyurethane) via the prepolymer method; both types were filled with different concentrations of nanocrystalline cellulose. Mechanical properties significantly influence the deformation at the material interface that occurs during contact or friction. Key surface characteristics, including surface energy, geometry, and physicochemical properties, affect the effective contact area and potential distribution. One-step PU with 0.1 % CNC demonstrates a maximum capacitance of 29.20 pF, a voltage of 2.04 V, an electric current of 0.43 µA and power of 0.89 µW, representing a 74.5 % increase in power compared to the neat one-step PU, exhibits significant potential for TENG applications. Performance improvements are associated with lower concentrations of cellulose nanocrystals, enhanced hydrogen bonding, and beneficial surface energy. The observed enhancements in output are attributed to improved internal polarization from well-dispersed crystalline nanocellulose, increased crystallinity of the soft segment, and reduced charge transfer mechanisms due to amino groups in the chain extender. However, the impact of the molecular structure and conformation of polyurethanes on triboelectrification remains unclear, highlighting the need for theoretical models and experimental data. This research provides a practical approach for developing stretchable triboelectric materials with enhanced mechanical properties, emphasizing the importance of considering factors such as mechanical parameters, nanofiller content, and surface physicochemical properties to optimize TENG design.

Ti3+ Self-Doping of TiO2 Boosts Its Photocatalytic Performance: A Synergistic Mechanism

Pollution remains one of the most significant global challenges. Photocatalysis consists of a new organic pollutant removal technology, with TiO2 widely studied as a photocatalyst in the photocatalytic removal of water pollution. However, intrinsic TiO2 has the disadvantages of weak visible light absorption, low electron separation, and transmission efficiency, as well as few active sites. In this study, anatase-phase Ti3+ self-doped TiO2 (B-TiO2) with a core-shell structure was successfully prepared by forming an amorphous layer rich in oxygen vacancies (OVs) and Ti3+ defects on the TiO2 surface under a nitrogen atmosphere using NaBH4 as a chemical-reducing agent. The visible light absorption performance of the catalyst was notably improved when exposed to light irradiation. The bending of surface energy bands facilitated the separation of photogenerated electron-hole pairs, and the core-shell structure allowed the electron-hole pairs to be transported to the surface of the catalyst and participate in the reaction faster. We observed that 92.86% of Rhodamine B (RhB) was degraded in only 5 min, an increase of 2.73 times that of the degradation rate observed in commercial P25. With extraordinary stability, the photocatalytic efficiency of the catalyst remained at 96.2% after five degradation cycles.

Transfunctional Optical Thin Films via Bioinspired Engineering.

Advanced multifunctional optical films or substrates have continued to develop as essential components in the diverse optical industry. Several functions, including high transparency, self-cleaning ability, structural color, flexibility, and durability, are required to obtain versatile and practical optical films. Herein, we introduce a cicada-wing-inspired transfunctional optical thin film (CITOTF) with nanostructures on both surface nanostructures inspired by the cicada-wings. CITOTFs made of perfluoropolyether (PFPE), which has a low refractive index, low surface energy, and high robustness as a substrate material, are obtained by a well-designed sandwich lithography method. We fabricated two types of CITOTFs depending on the size (300 and 1000 nm) of the surface nanostructure. 300-CITOTF and 1000-CITOTF exhibit high transparency and structural color effects, respectively. Both samples demonstrate self-cleaning ability, flexibility, and long-term stability. The bioinspired transfunctional optical films developed in this study can be used in various optical applications.

Controlling spheroid attachment improves pancreatic beta cell differentiation from human iPS cells.

Regenerative medicine using human induced pluripotent stem cells (hiPSCs) is available for treating type 1 diabetes; however, the efficiency and maturation of hiPSC differentiation into pancreatic beta cells requires improvement. Various protocols, including three-dimensional (3D) culture, have been developed to improve differentiation efficiency and maturation. Several methods for 3D culture have been reported; however, they require costly and complicated equipment, special materials, and complicated operations. To solve these problems, we developed a simple 3D culture method under static conditions using a cyclo-olefin polymer (COP) characterized by high moisture barrier properties, low surface energy, and hydrophobicity. Using this 3D method and our simple and low-cost protocol, we found that differentiation into the definitive endoderm (DE) was better when the spheroids were attached. Therefore, upon the addition of Y-27632, attached spheroids with unique shapes and cavities were formed, and the differentiation efficiency into DE increased. During DE differentiation, the attachment of spheroids to the substrate and their subsequent floating improved differentiation efficiency. We found that the amount of C-peptide in spheroids differentiated using COP dishes was greater than that in rotary culture. Furthermore, INSULIN was highly expressed in areas with low cell density, suggesting that the unique shape of the spheroids made from COP dishes improved differentiation efficiency. Our study suggests that a device-free, simple 3D culture method that controls spheroid attachment improves the efficiency of hiPSC differentiation into pancreatic beta cells.

Sensitivity of the Northern Hemisphere Warming Trend to Snowpack Variability

Abstract A marked decrease in land surface snow cover within the Northern Hemisphere under global warming will warm the atmosphere near the land surface. However, minimal information exists regarding the contribution of snowpack variation to interannual surface air temperature variability. The current study investigates the effects caused by snow water equivalent (SWE) change on surface air temperature (SAT). To this end, an SWE pacemaker experiment of land–atmosphere coupling (AMIP-type) is undertaken for the period 1901–2010, during which the Model for Interdisciplinary Research on Climate, version 6 (MIROC6), atmospheric general circulation model’s SWE is continuously nudged toward SWE derived from an land-only (LMIP-type) experiment. Compared to a reference MIROC6 simulation without SWE nudging, the spatial correlation of 1980–2010 interannual SWE trends in our experiment with those in GlobSnow observation data increased by 0.31 over the Northern Hemisphere. Similarly, the linear correlation of interannual SAT with reanalysis data is greater by 0.04, 0.04, 0.08, and 0.07 for autumn, winter, spring, and summer over the region from the reference experiment, respectively. It is shown that due to this SWE nudging, the modeled interannual SAT change in the Northern Hemisphere becomes more accurate. Through a surface energy budget analysis, changes in SAT are attributed to changes in surface albedo, soil evaporation, and soil temperature. Areas of greater contribution of SWE variability to SAT variability appear to shift from south to north areas as snow melts. These results highlight surface albedo, snow hydrological, and land heat storage effects through which the SWE interannual trend on the land surface significantly controls atmospheric air temperature variability near the land surface. Significance Statement This study investigates the contribution of land snowpack to surface air temperature in the Northern Hemisphere using a climate model updated with observation-based estimates of snow water equivalent. A marked decrease in snowpack under global warming is expected to warm the atmosphere near the land surface. Variations in surface albedo, soil evaporation, and soil temperature through the snow–soil–atmosphere processes during the early snow-melting season are crucial for accurately simulating surface air temperature in the Northern Hemisphere. Moreover, terrestrial snowpack is a significant factor in global warming rates.

Electrochemical nucleation and growth kinetics: insights from single particle scanning electrochemical cell microscopy studies.

The kinetics of particle nucleation and growth are critical to a wide variety of electrochemical systems. While studies carried out at the single particle level are promising for improving our understanding of nucleation and growth processes, conventional analytical frameworks commonly employed in bulk studies may not be appropriate for single particle experiments. Here, we present scanning electrochemical cell microscopy (SECCM) studies of Ag nucleation and growth on carbon and indium tin oxide (ITO) electrodes. Statistical analyses of the data from these experiments reveal significant discrepancies with traditional, quasi-equilibrium kinetic models commonly employed in the analysis of particle nucleation in electrochemical systems. Time-dependent kinetic models are presented capable of appropriately analysing the data generated via SECCM to extract meaningful chemical quantities such as surface energies and kinetic rate constants. These results demonstrate a powerful new approach to the analysis of single particle nucleation and growth data which could be leveraged in differentiating behavior within spatially heterogeneous systems.

Role of surface grain refinement in AZ31 Mg alloy by shot peening on surface energy, biomineralization and degradation behavior

Grain refinement of magnesium (Mg) alloys to improve their performance as potential candidates for degradable implant applications is a promising strategy in the field of materials engineering. Surface properties play an important role in promoting higher implant tissue interactions which dictate the healing rate of the fractured bone. In the present work, AZ31 Mg alloy was subjected to shot peening by using steel balls of 2 mm diameter. From the microstructural studies carried out at the cross section, fine grain structure was observed up to 50 μm depth from the surface. Grain refinement up to ∼1.5 μm was achieved at the surface of shot peened AZ31. X-ray diffraction analysis confirms the development of non-basal texture at the surface. Increased surface energy was measured by contact angle measurements for the shot peened AZ31. Higher hardness was measured from the surface in the thickness direction of the AZ31 after shot peening. Corrosion behavior assessed by potentiodynamic polarization tests indicated marginally increased corrosion resistance for shot peened AZ31. In vitro bioactivity studies carried out in simulated body fluids demonstrated higher mineral depositions and lower weight loss for the surface grain refined AZ31. The results demonstrate the potential of shot peening to promote higher biomineralization and to control the degradation in improving the performance of biodegradable AZ31 Mg alloy.

Experiment of droplet anisotropic wetting behavior on micro-grooved PDMS membranes.

Wetting behavior of droplets on a substrate with micro-grooves plays a key role in super-hydrophobicity. This paper aims to study the influence of groove width, droplet size, and surface tension on the anisotropic wetting behavior of droplets on micro-grooved PDMS membranes. Three types of PDMS membranes are made by mold replication. Profiles of droplets along the circumferential direction are observed by HD camera, and the 3D model of the droplet is reconstructed. Capillary forces at the three-phase contact line are obtained using the surface tension integration method. Additionally, liquid's wetting depth within the micro-grooves is calculated using an interfacial free energy equilibrium approach. The experiment shows that the micro-grooved PDMS membrane has anisotropic constrain to droplets due to wetting depth change in micro-grooves. Meta-equilibrium states at the three-phase contact line are influenced not only by substrate free energy, but also by wetting depth, interface pressure, and substrate structure.

Synthesis of Ferrocene‐Containing Schiff Bases Based on 3‐Aminopropyltriethoxysilane Oligomers for Covalent Modification of Glass Surfaces and Creation of Soft Magnetic Materials

ABSTRACTA ferrocene‐containing oligoorganosiloxane with a number‐average degree of polymerization of 8.8 and a number‐average molecular weight of 3200 is synthesized by hydrolytic condensation of 3‐aminopropyltriethoxysilane followed by chemical modification of the resulting oligomer with acetylferrocene. Its structure is characterized by MALDI‐TOF, NMR and IR spectroscopy. 1H NMR spectroscopy shows the predominance of more thermodynamically stable units containing anti‐configuration Schiff bases. Using IR spectroscopy as well as experimental determination of surface energy and its polar (acid–base) and dispersion components, the covalent immobilization of ferrocene‐containing oligoorganosiloxane on a glass surface after heating at 110°C is shown. The formed coating provides hydrophobization, acid–base indifference of the glass surface and serves as a precursor for the formation of magnetically soft materials after pyrolysis in argon already at 350°C. The main stages of ferrocene‐containing oligoorganosiloxane thermal destruction in an inert atmosphere and the formation of a mixture of iron and silicon oxides during its thermal oxidative destruction are established by combination of TGA/DTA, IR spectroscopy and elemental analysis. The proposed approach opens up new possibilities for functionalizing silicates surfaces, creating magnetic glasses, as well as regulating surface energy and its components.

Adsorption Structure-Activity Correlation in the Photocatalytic Chemistry of Methanol and Water on TiO2(110).

ConspectusPhotocatalysis, a process involving light absorption (band gap excitation), charge separation, interfacial charge transfer, and surface redox reactions, has attracted intensive attention because of the potential applications in solar to fuel conversion. Despite the great efforts devoted to the design of materials and optimization of charge separation and overall efficiency, the molecular mechanism of photocatalytic reactions, for example, water oxidation, is still unclear, mainly because of the complexity of powder catalysts and the aqueous environment which prevent the direct experimental detection of adsorption sites, surface species, and charge/energy transfer dynamics. Without direct evidence, the charge transfer and elementary reaction steps remain elusive, and misleading conclusions are sometimes drawn. For instance, the positively charged 5-fold coordinated Ti sites (Ti5cs) on TiO2 surfaces are argued to propel holes and therefore cannot be active sites for oxidative reactions, regardless of the demonstration by scanning tunneling microscopy (STM). Direct site-specific measurements are thus highly demanded. Surface science studies, which rely on well-defined single crystals and ultrahigh vacuum based techniques, can identify the active sites and active species at the catalyst surfaces and measure the interfacial electronic structure and energy of desorbing species for charge transfer analysis, providing direct evidence for investigating the photocatalytic reaction mechanism at the molecular level.In this Account, the elementary photocatalytic chemistry of methanol and water on TiO2, which are investigated by surface science techniques such as atom-resolved STM, ensemble-averaged mass spectrometer based temperature-programmed desorption/time-of-flight spectroscopy, and photoelectron spectroscopy in combination with theoretical calculations, will be described. Both methanol and water can be photocatalytically oxidized at Ti5cs, producing adsorbed formaldehyde and gaseous •OH radicals, respectively, under ultraviolet (UV) light irradiation. The photocatalytic activity shows salient adsorption structure including adsorption site (terminal/bridging), adsorption state (molecular/dissociative) and adsorption configuration (monomer/cluster) dependence, which comes from the ability to generate terminal anions which are capable of capturing photogenerated holes and exhibit superior photocatalytic activity over their parent molecules. These studies reveal the origin of the correlation between photocatalytic activity and adsorption structure of CH3OH and H2O on TiO2 surfaces and suggest that the simple criteria widely used to analyze the feasibility of charge transfer, i.e., the relative position of the band edges and the molecular orbitals of adsorbates, should be replaced by the change of Gibbs free energy of the charge trapping reaction from the thermodynamic point of view. These results contribute to the fundamental understanding of photocatalysis. Based on our research, future state-resolved and time-resolved studies can provide deeper insight into the charge and energy transfer and transient intermediate species, which will benefit the depiction of the overall photocatalytic reactions, for example, the photocatalyzed oxygen evolution reaction from water.

Improvement of dispersants on nano carbon black-modified cement paste: performance, microstructure and carbon footprint

The agglomeration of nano carbon black (NCB), driven by its high specific surface energy, limits the fundamental performance of cementitious materials and hinders the broader application of functional cementitious materials in engineering domains. NCB-modified cement (NC) has a low snow-melting efficiency, resulting in high energy consumption and excessive CO2 emissions. Herein, this study innovatively proposed a method of using dispersants to overcome the above issue and systematically introduced the effects of three dispersants, polycarboxylic acid superplasticizer (PCE), tannic acid (TA), and sodium dodecyl sulfate (SDS), on NC. The dispersity of dispersant-NCB suspension was analyzed firstly, and then the performance of fresh paste, mechanical properties, resistivity, snow-melting speed and LCA of NC were explored. Experimental results indicated that, in terms of suspension stability, SDS was the most effective, followed by TA, while PCE exhibited the least efficacy. Furthermore, all three dispersants improved the fluidity of NC to varying degrees. However, PCE and TA demonstrated a retardation effect on the setting time, whereas SDS facilitated a reduction in the setting time of NC. From the point of view of mechanical properties, the use of these dispersants not only augmented the mechanical strength of the NC but also decreased its electrical resistivity. The uniform dispersion of SDS at the microstructural level of NCB had also been found. When the PCE content is 0.2%, TA content is 0.4%, and SDS content is 0.4%, the mechanical strength and resistivity of NC were the best. NC with dispersant TA melted snow three times faster than the control group, reducing snow-melting energy consumption. Moreover, LCA analysis showed that the addition of dispersants also reduced carbon emissions.

Mechanical and surface characterisation of additively manufactured polyetheretherketone for the tribo test

Purpose The additive manufacturing process, such as fused filament fabrication based on material extrusion, fabricates the samples layer-by-layer. The various parameters in the process significantly affect the dimensions, structure and mechanical properties of the fabricated parts. The purpose of this paper is to investigate the surface and mechanical properties that can affect the contact characteristics with other materials during tribological tests. Design/methodology/approach The investigation of 3D-printed Polyetheretherketone (PEEK) includes the measurement of dimensions, microhardness, surface roughness, surface energy and tensile strength to define material characteristics. The crystallinity is measured using an X-ray diffractometer to understand the hardness behaviour. Findings The printing parameters affect its surface roughness, hardness and crystallinity. This change in parameters such as layer thickness and infill density impacts mechanical properties such as hardness and surface roughness, which will influence the contact mechanism with the counter body during any tribological test. The change in a single parameter during the sample fabrication and the change in the surface and mechanical properties are observed. Research limitations/implications The material cost plays an important role in conducting numerous destructive tests, which is a major limitation to conducting parameter optimisation by varying more parameters. The study is limited to the as-fabricated samples rather than finished samples and without any heat treatment. Achieving optimal parameters is integral to the success of additive manufacturing, ensuring the production of components with consistent performance. Practical implications The study aims at the application of 3D-printed PEEK for bush or journal bearings that can be directly used in practice. The mechanical properties discussed in this paper can fill the gap between theory and practice. Social implications The research provides all fundamental properties, including the printing parameters and their effect on the dimensions and surface structure, which are required to understand the material and its use. The results are consistent as at least four samples were tested for tribological behaviour. The conclusion is updated as per suggestions. Originality/value The study outlines the relationship between the change in layer thickness and infill density with changes in surface energy, surface roughness, hardness and tensile strength. The deformation and adhesion during the friction test depend on these properties.

Double Carbon-Species Coated Porous Silicon Anode Induced by Interfacial Energy Reduction for Lithium-Ion Batteries.

The rapid development of electric vehicles necessitates high-energy density Li-ion batteries for extended range. Silicon is a promising alternative to graphite anodes due to its high capacity; however, its substantial volume expansion during cycling leads to continuous growth of the solid electrolyte interphase and significant capacity fading. This study addresses these issues by designing a porous Si structure combined with a double carbon-species coating layer, induced by low interfacial energy in a scalable process. Carbon and graphene are located on Si surfaces, forming a close interface that maintains electrical contact, suppresses lithium consumption, and enhances charge transfer properties. The composite anode with a double carbon-species coating on Si demonstrates rapid stabilization with increasing coulombic efficiency, achieving a specific capacity of 1,814 mAh g-1 at 0.2 C and a high-rate capability of 1,356 mAh g-1 at 10C. Additionally, in a full-cell configuration with LiFePO4, it recorded a specific capacity of 161 mAh g-1 at 0.2 C. These results show the potential of porous Si with a carbon-graphene coating for stable, high-capacity operation in Li-ion batteries, offering new insights into high-performance electrochemical systems. Moreover, the double carbon-species coating derived from a scalable surface chemistry-based process presents a realistic alternative for industrial applications.

Oriented and Continuous Phase Epitaxy Enabled by A Highly Dendrite‐Resistant Plane Toward Super‐High Areal Capacity Zinc Metal Batteries

AbstractUnstable Zn metal anodes with dendrites/side reactions are becoming the main obstacle to the practical application of zinc‐based aqueous batteries. Epitaxial growth has been considered to be an effective strategy for solving these issues, especially for inducing the (002) plane growth. Nonetheless, the (002)‐textured Zn is difficult to achieve highly stable Zn anode under high capacity resulting from its large lattice distortion. Herein, the Cu single atom anchored polymeric carbon nitride (Cu@PCN) is synthesized by a facile thermal polymerization method. Serving as multifunctional protective layer on Zn surface, the Cu@PCN can provide massive nucleation sites at a nano‐level and uniformize the electron distribution through coordination engineering. Optimizing the coordination structures of single Cu and N atoms within the carbon matrix enables a redistribution for electric field and regulates ion flux. More importantly, this coordination strategy with single atoms is first reported to customize oriented and continuous phase epitaxy along highly dendrite‐resistant Zn(101) plane by reducing (101) surface energy. This pattern of oriented dense deposition leads to stable and reversible Zn plating/stripping is achieved, which delivers an extended cycling life of 550 h at 10 A cm−2, 20 mAh cm−2. The practical full cell also displays stable performance for 1200 cycles.

Biocompatibility and antibacterial properties of medical stainless steel and titanium modified by alumina and hafnia films prepared by atomic layer deposition.

New methods for producing surfaces with suitable biocompatible properties are desirable due to increasing demands for biomedical devices. Stainless steel 316 L and cp- titanium specimens were coated with thin films of alumina and hafnia deposited using the atomic layer deposition method at two temperatures, 180 and 260 °C. The morphology of the films was analysed using scanning electron microscopy, and their surface energies were determined based on drop contact angle measurements. Biocompatibility assays performed using mesenchymal stem cells were evaluated by incubating the specimens and then exposing their extracts to the cells or directly seeding cells on the specimen surfaces. No detrimental effect was noticed for any of the specimens. Antibacterial properties were tested by directly incubating the specimens with the bacteria Staphylococcus aureus. Overall, our data show that all prepared films were biocompatible. Alumina films deposited on cp-titanium at 260 °C outperform the other prepared and tested surfaces regarding antiadhesive properties, which could be related to their low surface energy.