Surface-electrode Ion Trap Research Articles

Distance scaling of electric-field noise in a surface-electrode ion trap

We investigate anomalous ion-motional heating, a limitation to multi-qubit quantum-logic gate fidelity in trapped-ion systems, as a function of ion-electrode separation. Using a multi-zone surface-electrode trap in which ions can be held at five discrete distances from the metal electrodes, we measure power-law dependencies of the electric-field noise experienced by the ion on the ion-electrode distance $d$. We find a scaling of approximately $d^{-4}$ regardless of whether the electrodes are at room temperature or cryogenic temperature, despite the fact that the heating rates are approximately two orders of magnitude smaller in the latter case. Through auxiliary measurements using application of noise to the electrodes, we rule out technical limitations to the measured heating rates and scalings. We also measure frequency scaling of the inherent electric-field noise close to $1/f$ at both temperatures. These measurements eliminate from consideration anomalous-heating models which do not have a $d^{-4}$ distance dependence, including several microscopic models of current interest.

Measurement of Heating Rates in a Microscopic Surface-Electrode Ion Trap**Supported by the National Natural Science Foundation of China under Grant Nos Y5Z2111001, 91421111 and 11674360.

We report measurement of heating rates of ions confined in our home-made microscopic surface-electrode trap by a Doppler recooling method. The ions are trapped with approximately above the surface, and are subjected to heating due to various noises in the trap. There are 3–5 ions involved to measure the heating rates precisely and efficiently. We show the heating rates in variance with the number and the position of the ions as well as the radio-frequency power, which are helpful for understanding the trap imperfection.

Optimised surface-electrode ion-trap junctions for experiments with cold molecular ions

We discuss the design and optimisation of two types of junctions between surface-electrode radiofrequency ion-trap arrays that enable the integration of experiments with sympathetically cooled molecular ions on a monolithic chip device. A detailed description of a multi-objective optimisation procedure applicable to an arbitrary planar junction is presented, and the results for a cross junction between four quadrupoles as well as a quadrupole-to-octupole junction are discussed. Based on these optimised functional elements, we propose a multi-functional ion-trap chip for experiments with translationally cold molecular ions at temperatures in the millikelvin range. This study extends complex chip-based trapping techniques to Coulomb-crystallised molecular ions with potential applications in mass spectrometry, spectroscopy, controlled chemistry and quantum technology.

Creating equally spaced linear ion string in a surface-electrode trap by feedback control

A feedback control method for producing an equidistant ion string in a surface-electrode ion trap has been experimentally demonstrated. This method features three advantages: (i) The optimal voltage can be constrained within the specified reachable range. (ii) The height of trapped ions from the trap surface can be maintained at the same value when strings with different number of ions or with different ion spacings are to be trapped. (iii) This method is resistant to a stray electric field near the trap. By this method, the asymmetry of the ion string caused by a stray field is minimized. The robustness of trapping a variable number of ions at the same potential and the dependency of the axial frequency on the number of ions are also investigated experimentally. This work would be a practical method to create a linear ion string with a large number of ions and may find applications in large-scale quantum computing, quantum simulation, and phase transition studies utilizing homogeneous ion strings.

Automating quantum experiment control

The field of quantum information processing is rapidly advancing. As the control of quantum systems approaches the level needed for useful computation, the physical hardware underlying the quantum systems is becoming increasingly complex. It is already becoming impractical to manually code control for the larger hardware implementations. In this chapter, we will employ an approach to the problem of system control that parallels compiler design for a classical computer. We will start with a candidate quantum computing technology, the surface electrode ion trap, and build a system instruction language which can be generated from a simple machine-independent programming language via compilation. We incorporate compile time generation of ion routing that separates the algorithm description from the physical geometry of the hardware. Extending this approach to automatic routing at run time allows for automated initialization of qubit number and placement and additionally allows for automated recovery after catastrophic events such as qubit loss. To show that these systems can handle real hardware, we present a simple demonstration system that routes two ions around a multi-zone ion trap and handles ion loss and ion placement. While we will mainly use examples from transport-based ion trap quantum computing, many of the issues and solutions are applicable to other architectures.

Optimization of parameters of a surface-electrode ion trap and experimental study of influences of surface on ion lifetime

In this paper we report the optimal design and fabrication of a gold-on-silica linear segmented surface-electrode ion trap. By optimizing the thickness and width of the electrodes, we improved the trapping ability and trap scalability. By using some practical experimental operation methods, we successfully minimized the trap heating rate. Consequently, we could trap a string of up to 38 ions, and a zigzag structure with 24 ions, and transport two trapped ions to different zones. We also studied the influences of the ion chip surface on the ion lifetime. The excellent trapping ability and flexibility of operation of the planar ion trap shows that it has high feasibility for application in the development a practical quantum information processor or quantum simulator.

Semi-analytical model for quasi-double-layer surface electrode ion traps

To realize scale quantum processors, the surface-electrode ion trap is an effective scaling approach, including single-layer, double-layer, and quasi-double-layer traps. To calculate critical trap parameters such as the trap center and trap depth, the finite element method (FEM) simulation was widely used, however, it is always time consuming. Moreover, the FEM simulation is also incapable of exhibiting the direct relationship between the geometry dimension and these parameters. To eliminate the problems above, House and Madsen et al. have respectively provided analytic models for single-layer traps and double-layer traps. In this paper, we propose a semi-analytical model for quasi-double-layer traps. This model can be applied to calculate the important parameters above of the ion trap in the trap design process. With this model, we can quickly and precisely find the optimum geometry design for trap electrodes in various cases.

Integrated optical addressing of an ion qubit.

The long coherence times and strong Coulomb interactions afforded by trapped ion qubits have enabled realizations of the necessary primitives for quantum information processing and the highest-fidelity quantum operations in any qubit to date. Although light delivery to each individual ion in a system is essential for general quantum manipulations and readout, experiments so far have employed optical systems that are cumbersome to scale to even a few tens of qubits. Here we demonstrate lithographically defined nanophotonic waveguide devices for light routing and ion addressing that are fully integrated within a surface-electrode ion trap chip. Ion qubits are addressed at multiple locations via focusing grating couplers emitting through openings in the trap electrodes to ions trapped 50 μm above the chip; using this light, we perform quantum coherent operations on the optical qubit transition in individual 88Sr+ ions. The grating focuses the beam to a diffraction-limited spot near the ion position with 2 μm 1/e2 radius along the trap axis, and we measure crosstalk errors between 10-2 and 4 × 10-4 at distances 7.5-15 μm from the beam centre. Owing to the scalability of the planar fabrication technique employed, together with the tight focusing and stable alignment afforded by the integration of the optics within the trap chip, this approach presents a path to creating the optical systems required for large-scale trapped-ion quantum information processing.

Universal control of ion qubits in a scalable microfabricated planar trap

We demonstrate universal quantum control over chains of ions in a surface-electrode ion trap, including all the fundamental operations necessary to perform algorithms in a one-dimensional, nearest-neighbor quantum computing architecture. We realize both single-qubit operations and nearest-neighbor entangling gates with Raman laser beams, and we interleave the two gate types. We report average single-qubit gate fidelities as high as 0.970(1) for two-, three-, and four-ion chains, characterized with randomized benchmarking. We generate Bell states between the nearest-neighbor pairs of a three-ion chain, with fidelity up to 0.84(2). We combine one- and two-qubit gates to perform quantum process tomography of a cnot gate in a two-ion chain, and we report an overall fidelity of 0.76(3).

Error compensation of single-qubit gates in a surface-electrode ion trap using composite pulses

The fidelity of laser-driven quantum logic operations on trapped ion qubits tend to be lower than microwave-driven logic operations due to the difficulty of stabilizing the driving fields at the ion location. Through stabilization of the driving optical fields and use of composite pulse sequences, we demonstrate high fidelity single-qubit gates for the hyperfine qubit of a $^{171}\text{Yb}^+$ ion trapped in a microfabricated surface electrode ion trap. Gate error is characterized using a randomized benchmarking protocol, and an average error per randomized Clifford group gate of $3.6(3)\times10^{-4}$ is measured. We also report experimental realization of palindromic pulse sequences that scale efficiently in sequence length.

Experimental demonstration of a surface-electrode multipole ion trap

We report on the design and experimental characterization of a surface-electrode multipole ion trap. Individual microscopic sugar particles are confined in the trap. The trajectories of driven particle motion are compared with a theoretical model, both to verify qualitative predictions of the model and to measure the charge-to-mass ratio of the confined particle. The generation of harmonics of the driving frequency is observed as a key signature of the nonlinear nature of the trap. We remark on possible applications of our traps, including to mass spectrometry.

Structural and energetic properties of molecular Coulomb crystals in a surface-electrode ion trap

Cold molecular ions are of great interest for applications in cold collision studies, chemistry, precision spectroscopy and quantum technologies. In this context, sympathetic cooling of molecular ions by the interaction with laser-cooled atomic ions is a powerful method to cool their translational motion and achieve translational temperatures in the millikelvin range. Recently, we implemented this method in a surface-electrode ion trap. The flexibility in shaping the trapping potentials offered by the surface-electrode structure enabled us to generate planar bicomponent Coulomb crystals and spatially separate the molecular from the atomic ions. Here, we present a detailed description of the fabrication and simulation of the trap as well as a theoretical and experimental investigation of the structural and energetic properties of the Coulomb crystals obtained in the device. We discuss in more detail the separation of different ion species using static electric fields and explore the effects of trap anharmoncities on the shape of bicomponent crystals.

An ion trap built with photonic crystal fibre technology.

We demonstrate a surface-electrode ion trap fabricated using techniques transferred from the manufacture of photonic-crystal fibres. This provides a relatively straightforward route for realizing traps with an electrode structure on the 100 micron scale with high optical access. We demonstrate the basic functionality of the trap by cooling a single ion to the quantum ground state, allowing us to measure a heating rate from the ground state of 787 ± 24 quanta/s. Variation of the fabrication procedure used here may provide access to traps in this geometry with trap scales between 100 μm and 10 μm.

Design Optimization for Anharmonic Linear Surface-Electrode Ion Trap

An accurate and rapid method is proposed to optimize anharmonic linear surface-electrode ion trap design. Based on the method, we analyze the impact of the architectural parameters, including the width, number, and applied voltage of prerequisite active electrodes, on the number and spacing of trapped ions. Sets of optimal anharmonic trap design are given. Then the optimal designs are verified by using an ant colony optimization algorithm. The results show that the maximum ion position errors and maximum ion spacing errors are less than 1 μm up to 80. The mean of the maximum errors is nearly linear with respect to the number of trapped ions.

A flexible optimization method for scaling surface-electrode ion traps

Recent advances in scaling surface-electrode ion trap have demonstrated optimization of critical components, such as junctions and loading slots. In this study, a flexible method to systematically optimize the shape of radio frequency (rf) rails in different components was proposed. The rf rails were discretized in the electrostatic calculation; thus, the spatial fields of different components can be accumulated according to the superposition principle. The optimization process was accomplished by placing artificial control points along the edges of the rf rails, providing controllable degree of freedom. The locations of these control points were modified using ant colony optimization, which employs a proposed hybrid multi-objective function. The proposed method was verified with three kinds of components: an X junction, a Y junction, and a loading slot. Compared with the results obtained using non-optimized cases and the existing methods, the proposed method produced favorable results in maintaining the ion height and minimizing the axial pseudopotential barrier and rf noise heating. The proposed method can also be used to optimize other scaling components of surface-electrode ion traps.

Transformed composite sequences for improved qubit addressing

Selective laser addressing of a single atom or atomic ion qubit can be improved using narrow-band composite pulse sequences. We describe a Lie-algebraic technique to generalize known narrow-band sequences and introduce sequences related by dilation and rotation of sequence generators. Our method improves known narrow-band sequences by decreasing both the pulse time and the residual error. Finally, we experimentally demonstrate these composite sequences using ${}^{40}{\mathrm{Ca}}^{+}$ ions trapped in a surface-electrode ion trap.

Sympathetic cooling of molecular ions in a surface-electrode ion trap

We report the sympathetic cooling and Coulomb crystallization of molecular ions above the surface of an ion-trap chip. N$_2^+$ and CaH$^+$ ions were confined in a surface-electrode radiofrequency ion trap and cooled by the interaction with laser-cooled Ca$^{+}$ ions to secular translational temperatures in the millikelvin range. The configuration of trapping potentials generated by the surface electrodes enabled the formation of planar bicomponent Coulomb crystals and the spatial separation of the molecular from the atomic ions on the chip. The structural and thermal properties of the Coulomb crystals were characterized using molecular dynamics simulations. The present study extends chip-based trapping techniques to Coulomb-crystallized molecular ions with potential applications in mass spectrometry, cold chemistry, quantum information science and spectroscopy.

Ion traps fabricated in a CMOS foundry

We demonstrate trapping in a surface-electrode ion trap fabricated in a 90-nm CMOS (complementary metal-oxide-semiconductor) foundry process utilizing the top metal layer of the process for the trap electrodes. The process includes doped active regions and metal interconnect layers, allowing for co-fabrication of standard CMOS circuitry as well as devices for optical control and measurement. With one of the interconnect layers defining a ground plane between the trap electrode layer and the p-type doped silicon substrate, ion loading is robust and trapping is stable. We measure a motional heating rate comparable to those seen in surface-electrode traps of similar size. This demonstration of scalable quantum computing hardware utilizing a commercial CMOS process opens the door to integration and co-fabrication of electronics and photonics for large-scale quantum processing in trapped-ion arrays.

Heating rates and ion-motion control in aY-junction surface-electrode trap

We measure ion heating following transport throughout a Y-junction surface-electrode ion trap. By carefully selecting the trap voltage update rate during adiabatic transport along a trap arm, we observe minimal heating relative to the anomalous heating background. Transport through the junction results in an induced heating between 37 and 150 quanta in the axial direction per traverse. To reliably measure heating in this range, we compare the experimental sideband envelope, including up to fourth-order sidebands, to a theoretical model. The sideband envelope method allows us to cover the intermediate heating range inaccessible to the first-order sideband and Doppler recooling methods. We conclude that quantum information processing in this ion trap will likely require sympathetic cooling in order to support high fidelity gates after junction transport.

Characterization of Fluorescence Collection Optics Integrated with a Microfabricated Surface Electrode Ion Trap

One of the outstanding challenges for ion trap quantum information processing is to accurately detect the states of many ions in a scalable fashion. In the particular case of surface traps, geometric constraints make imaging perpendicular to the surface appealing for light collection at multiple locations with minimal cross-talk. In this report we describe an experiment integrating Diffractive Optic Elements (DOE's) with surface electrode traps, connected through in-vacuum multi-mode fibers. The square DOE's reported here were all designed with solid angle collection efficiencies of 3.58%; with all losses included a detection efficiency of 0.388% (1.02% excluding the PMT loss) was measured with a single Ca+ ion. The presence of the DOE had minimal effect on the stability of the ion, both in temporal variation of stray electric fields and in motional heating rates.