Supramolecular Coordination Research Articles

Hierarchical Multi‐Component Self‐Assembly Involving Alkali and Lanthanide(III) Metal Ions and Water Soluble Sulfonated Calix[4]arene

AbstractSolid state structural studies of three supramolecular coordination complexes establish the formation of hetero‐bimetallic two‐ and three‐dimensional ensembles involving sulfonated calix[4]arene, and sodium ions and low nuclearity lanthanide(III) ions. The interplay of components is altered in response to the addition of different auxiliary molecules during crystallisation which is associated with significant changes in the metal coordination environments and overall molecular packing, as established in comparing the structures of complexes of similar cell dimensions with those available in the literature. The sulfonated calixarene form a common self‐assembly array despite different lanthanides being incorporated, as an isostructural series of complexes. Crystallographic analysis shows a continually decreasing trend in the lanthanide–oxygen bond length as the lanthanide atomic number increases. As smaller molecules are incorporated to the hetero‐bimetallic calixarene system, the self‐assembly and the metal coordination environment are perturbed.

Synthesis, Characterization, and Photochemistry of a Ga2L3 Coordination Cage with Dithienylethene-Catecholate Ligands.

Two new photoswitchable dithienylethene (DTE)-catechol ligands, specifically designed for group 13 metal coordination, were synthesized via Suzuki coupling reactions from a dichloro-DTE building block, each with varying longitudinal extensions. The shorter DTE-catechol ligand did not efficiently assemble with Ga3+ metal ions; however, elongation with a phenylene-amide spacer group enabled the successful formation of a novel triply DTE-functionalized coordination [Ga2L3]6- cage. This cage represents a unique example of integrating DTE photoswitches with main group metals in a supramolecular coordination framework. The [Ga2L3]6- cage was thoroughly characterized by NMR spectroscopy, including DOSY hydrodynamic volumetric analyses, high-resolution mass spectrometry, computational DFT, and photochemical analyses. The DFT studies highlighted the structural integrity and dynamic interplay within the helicate and mesocate isomeric forms of the [Ga2L3]6- cage upon photoswitching. While the free ligands exhibited all-photonic reversible switching at up to mM concentrations upon alternating irradiation at 365 and >495 nm, the [Ga2L3]6- cage demonstrated these capabilities under dilute μM conditions, albeit with lower efficiency and fatigue resistance. This behavior highlights the intricate relationship between rigid coordination with main group metals and the flexibility of the photoswitchable DTE ligands within the [Ga2L3]6- cage.

Synergistic impact of nano-supramolecular coordination polymer based on cadmium, ethyl nicotinate and thiocyanate ligands as efficient catalyst to remove harmful elements from wastewater.

Under ultrasonication, cadmium nitrate tetrahydrates, ethyl nicotinate (EN), and potassium thiocyanate as connecting ligand self-assembled to form the nanosized supramolecular coordination polymer (NSCP1) and the crystalline supramolecular coordination polymer (SCP1) [Cd(EN)2(SCN)2]. Single crystal SCP1 X-ray diffraction (XRD) revealed that CdII has an octahedral shape. The network structure of SCP1 is composed of chair conformation cyclic [Cd2(SCN)2] n building blocks that form a one dimensional (1D) chain with bilaterally coordinated EN. The 1D-chain is joined to the other by extensive hydrogen bonds, which arrange the chains into a three-dimensional network. By stacking π-π, the strands are fluttering the three-dimensional (3D) network even more. Several structural characterization methods and spectral analyses were used to analyze SCP1 and NSCP1. The heterogeneous catalysts SCP1 and NSCP1 have been shown to display exceptionally strong catalytic activity against the breakdown of the designated contaminant, indigo carmine (IC) color in very short durations under ultraviolet (UV) or ultrasonic wave conditions. The photoluminescence probing approach was utilized to determine the reactive oxygen species and reaction process using the disodium salt of terephthalic acid.

Metallo-Supramolecular Helicates as Surface-Enhanced Raman Scattering (SERS) Substrates with High Tailorability.

The exploration of novel functionalized supramolecular coordination complexes (SCCs) can enable new applications in domains that include purification and sensing. In this study, employing a coordination-driven self-assembly strategy, we designed and prepared a series of benzochalcogenodiazole-based metallohelicates as high-efficiency charge transfer surface-enhanced Raman scattering (SERS) substrates, expanding the range of applications for these metallohelicates. Through structural modifications, including the substitution of single heteroatoms on ligands, replacement of coordinating metals, and alteration of ligand framework linkages, the Raman performance of these metallohelicates as substrates were systematically optimized. Notably, the SERS enhancement factors (EFs) of the metallohelicate-based SERS substrates were significantly enhanced to levels as high as 1.03 × 107, which rivals the EFs of noble metals devoid of "hot spots". Additionally, the underlying Raman enhancement mechanisms of these metallohelicates have been investigated through a combination of control experiments and theoretical calculations. This study not only demonstrates the utility of metallohelicates as SERS substrates but also offers insights and materials for the development of high-efficiency new charge transfer SERS substrates.

Metallo‐Supramolecular Helicates as Surface‐Enhanced Raman Scattering (SERS) Substrates with High Tailorability

The exploration of novel functionalized supramolecular coordination complexes (SCCs) can enable new applications in domains that include purification and sensing. In this study, employing a coordination‐driven self‐assembly strategy, we designed and prepared a series of benzochalcogenodiazole‐based metallohelicates as high‐efficiency charge transfer surface‐enhanced Raman scattering (SERS) substrates, expanding the range of applications for these metallohelicates. Through structural modifications, including the substitution of single heteroatoms on ligands, replacement of coordinating metals, and alteration of ligand framework linkages, the Raman performance of these metallohelicates as substrates were systematically optimized. Notably, the SERS enhancement factors (EFs) of the metallohelicate‐based SERS substrates were significantly enhanced to levels as high as 1.03 × 107, which rivals the EFs of noble metals devoid of "hot spots". Additionally, the underlying Raman enhancement mechanisms of these metallohelicates have been investigated through a combination of control experiments and theoretical calculations. This study not only demonstrates the utility of metallohelicates as SERS substrates but also offers insights and materials for the development of high‐efficiency new charge transfer SERS substrates.

Supramolecular Binding of Phosphonate Dianions by Nanojars and Nanojar Clamshells.

Despite the widespread use of phosphonates (RPO32-) in various agricultural, industrial, and household applications and the ensuing eutrophication of polluted water bodies, the capture of phosphonate ions by molecular receptors has been scarcely studied. Herein, we describe a novel approach to phosphonate binding using chemically and thermally robust supramolecular coordination assemblies of the formula [RPO3⊂{cis-CuII(μ-OH)(μ-pz)}n]2- (Cun; n = 27-31; pz = pyrazolate ion, C3H3N2-; R = aliphatic or aromatic group). The neutral receptors, termed nanojars, strongly bind phosphonate anions by a multitude of hydrogen bonds within their highly hydrophilic cavities. These nanojars can be synthesized either directly from their constituents or by depolymerization of [trans-CuII(μ-OH)(μ-pz)]∞ induced by phosphonate anions. Electrospray-ionization mass spectrometry, UV-vis and variable-temperature, paramagnetic 1H and 31P NMR spectroscopy, single-crystal X-ray diffraction, along with chemical stability studies toward NH3 and Ba2+ ions, and thermal stability studies in solution are employed to explore the binding of various phosphonate ions by nanojars. Crystallographic studies of 12 different nanojars offer unprecedented structural characterization of host-guest complexes with doubly charged RPO32- ions and reveal a new motif in nanojar chemistry, nanojar clamshells, which consist of phosphonate anion-bridged pairs of nanojars and double the phosphonate-binding capacity of nanojars.

On-Surface Self-Assembly Kinetic Study of Cu-Hexaazatriphenylene 2D Conjugated Metal-Organic Frameworks on Coinage Metals and MoS2 Substrates.

Supramolecular coordination self-assembly on solid surfaces provides an effective route to form two-dimensional (2D) metal-organic frameworks (MOFs). In such processes, surface-adsorbate interaction plays a key role in determining the MOFs' structural and chemical properties. Here, we conduct a systematic study of Cu-HAT (HAT = 1,4,5,8,9,12-hexaazatriphenylene) 2D conjugated MOFs (c-MOFs) self-assembled on Cu(111), Au(111), Ag(111), and MoS2 substrates. Using scanning tunneling microscopy and density functional theory calculations, we found that the as-formed Cu3HAT2 c-MOFs on the four substrates exhibit distinctive structural features including lattice constant and molecular conformation. The structural variations can be attributed to the differentiated substrate effects on the 2D c-MOFs, including adsorption energy, lattice commensurability, and surface reactivity. Specifically, the framework grown on MoS2 is nearly identical to its free-standing counterpart. This suggests that the 2D van der Waals (vdW) materials are good candidate substrates for building intrinsic 2D MOFs, which hold promise for next-generation electronic devices.

Thermal-Sensitive Supramolecular Coordination Complex Formed by Orthogonal Metal Coordination and Host-Guest Interactions for an Electrical Thermometer.

Supramolecular coordination complexes (SCCs) are popular for their structural diversity and functional adaptability, which make them suitable for a wide range of applications. Photophysical and mechanical performance of SCCs are the most attractive characteristics, yet their ionically conductive behavior and potential in electrical sensing have been rarely investigated. This study reports a well-designed SCC that integrates orthogonal metal coordination and host-guest interactions to achieve sensitive electrical thermal sensing. Owing to the thermodynamic nature of the host-guest interaction, the SCC encounters thermally induced disassembly, leading to significantly enhanced ion mobility and thus allowing for the precise detection of minor temperature variation. The SCC-based thermometer is then fabricated with the assistance of 3D printing and demonstrates good accuracy and reliability in monitoring human skin temperature and real-time temperature changes of mouse during the whole anesthesia and recovery process. Our findings provide an innovative strategy for developing electrical thermometers and expand the current application scope of SCCs in electrical sensing.

Retrospective Analysis of Structure-Property Relationship of Emergent Metallo-Supramolecular Polymer Networks.

Metallo-supramolecular polymer networks (MSPNs) are fabricated from the crosslinking of polymers by discrete supramolecular coordination complexes. Due to the availability of various coordination complexes, e. g., 2D macrocycles and 3D nanocages, the MSPNs have been recently developed with broadly tunable visco-elasticity and enriched functions inherited from the coordination complexes. The coordination complexes possess enriched topologies and unique structural relaxation dynamics, rendering them the capability to break the traditional tradeoffs of polymer systems for the design of materials with enhanced mechanical performance. The structure-property relationship studies are critical for the material-by-design of MSPNs, while the spatiotemporal investigations are desired for the exploration of dynamics information. The work summarizes recent studies on the unique ligand-exchange kinetics and the multi-level structural relaxation dynamics of MSPNs. The MSPNs' mechanical properties can be quantitatively correlated with the dynamics for understanding the structure-property relationship. This concept will not only serve to attract more researchers to engage in the study of the structure-activity relationship of MSPNs but also inspire innovative research findings pertaining to the application of MSPNs.

Highly robust supramolecular polymer networks crosslinked by a tiny amount of metallacycles

Supramolecular polymeric materials have exhibited attractive features such as self-healing, reversibility, and stimuli-responsiveness. However, on account of the weak bonding nature of most noncovalent interactions, it remains a great challenge to construct supramolecular polymeric materials with high robustness. Moreover, high usage of supramolecular units is usually necessary to promote the formation of robust supramolecular polymeric materials, which restrains their applications. Herein, we describe the construction of highly robust supramolecular polymer networks by using only a tiny amount of metallacycles as the supramolecular crosslinkers. A norbornene ring-opening metathesis copolymer with a 120° dipyridine ligand is prepared and self-assembled with a 60° or 120° Pt(II) acceptor to fabricate the metallacycle-crosslinked polymer networks. With only 0.28 mol% or less pendant dipyridine units to form the metallacycle crosslinkers, the mechanical properties of the polymers are significantly enhanced. The tensile strengths, Young’s moduli, and toughness of the reinforced polymers reach up to more than 20 MPa, 600 MPa, and 150 MJ/m3, respectively. Controllable destruction and reconstruction of the metallacycle-crosslinked polymer networks are further demonstrated by the sequential addition of tetrabutylammonium bromide and silver triflate, indicative of good stimuli-responsiveness of the networks. These remarkable performances are attributed to the thermodynamically stable, but dynamic metallacycle-based supramolecular coordination complexes that offer strong linkages with good adaptive characteristics.

Supramolecular Coordination Complexes for Synergistic Cancer Therapy.

Supramolecular coordination complexes (SCCs) are predictable and size-tunable supramolecular self-assemblies constructed through directional coordination bonds between readily available organic ligands and metallic receptors. Based on planar and 3D structures, SCCs can be mainly divided into two categories: metallacycles (e.g., rhomboidal, triangular, rectangular, and hexagonal) and metallacages (e.g., tetrahedral, hexahedral, and dodecahedral). The directional coordination bonds enable the efficient formation of metallacycles and metallacages with well-defined architectures and geometries. SCCs exhibit several advantages, including good directionality, strong interaction force, tunable modularity, and good solution processability, making them highly attractive for biomedical applications, especially in cellular imaging and cancer therapy. Compared with their molecular precursors, SCCs demonstrate enhanced cellular uptake and a strengthened tumor accumulation effect, owing to their inherently charged structures. These properties and the chemotherapeutic potential inherent to organic platinum complexes have promoted their widespread application in antitumor therapy. Furthermore, the defined structures of SCCs, achieved via the design modification of assembly elements and introduction of different functional groups, enable them to combat malignant tumors through multipronged treatment modalities. Because the development of cancer-treatment methodologies integrated in clinics has evolved from single-modality chemotherapy to synergistic multimodal therapy, the development of functional SCCs for synergistic cancer therapy is crucial. While some pioneering reviews have explored the bioapplications of SCCs, often categorized by a specific function or focusing on the specific metal or ligand types, a comprehensive exploration of their synergistic multifunctionality is a critical gap in the current literature.In this Account, we focus on platinum-based SCCs and their applications in cancer therapy. While other metals, such as Pd-, Rh-, Ru-, and Ir-based SCCs, have been explored for cancer therapy by Therrien and Casini et al., platinum-based SCCs have garnered significant interest, owing to their unique advantages in antitumor therapy. These platinum-based SCCs, which enhance antitumor efficacy, are considered prominent candidates for cancer therapies owing to their desirable properties, such as potent antitumor activity, exceptionally low systemic toxicity, active tumor-targeting ability, and enhanced cellular uptake. Furthermore, diverse diagnostic and therapeutic modalities (e.g., chemotherapy, photothermal therapy, and photodynamic therapy) can be integrated into a single platform based on platinum-based SCCs for cancer therapy. Consequently, herein, we summarize our recent research on platinum-based SCCs for synergistic cancer therapy with particular emphasis on the cooperative interplay between different therapeutic methods. In the Conclusions section, we present the key advancements achieved on the basis of our research findings and propose future directions that may significantly impact the field.

Supramolecular coordination platinum metallacycle–based multilevel wound dressing for bacteria sensing and wound healing

The exploitation of novel wound healing methods with real-time infection sensing and high spatiotemporal precision is highly important for human health. Pt-based metal-organic cycles/cages (MOCs) have been employed as multifunctional antibacterial agents due to their superior Pt-related therapeutic efficiency, various functional subunits and specific geometries. However, how to rationally apply these nanoscale MOCs on the macroscale with controllable therapeutic output is still challenging. Here, a centimeter-scale Pt MOC film was constructed via multistage assembly and subsequently coated on a N,N'-dimethylated dipyridinium thiazolo[5,4-d]thiazole (MPT)-stained silk fabric to form a smart wound dressing for bacterial sensing and wound healing. The MPT on silk fabric could be used to monitor wound infection in real-time through the bacteria-mediated reduction of MPT to its radical form via a color change. The MPT radical also exhibited an excellent photothermal effect under 660 nm light irradiation, which could not only be applied for photothermal therapy but also induce the disassembly of the Pt MOC film suprastructure. The highly ordered Pt MOC film suprastructure exhibited high biosafety, while it also showed improved antibacterial efficiency after thermally induced disassembly. In vitro and in vivo studies revealed that the combination of the Pt MOC film and MPT-stained silk can provide real-time information on wound infection for timely treatment through noninvasive techniques. This study paves the way for bacterial sensing and wound healing with centimeter-scale metal-organic materials.

Pt(II)/Pd(II)-Based Metallosupramolecular Architectures as Light Harvesting Systems and their Applications.

The development of artificial light-harvesting systems mimicking the natural photosynthesis method is an ever-growing field of research. Numerous systems such as polymers, metal complexes, POFs, COFs, supramolecular frameworks etc. have been fabricated to accomplish more efficient energy transfer and storage. Among them, the supramolecular coordination complexes (SCCs) formed by non-covalent metal-ligand interaction, have shown the capacity to not only undergo single and multistep energy migration but also to utilize the harvested energy for a wide variety of applications such as photocatalysis, tunable emissive systems, encrypted anti-counterfeiting materials, white light emitters etc. This review sheds light on the light-harvesting behavior of both the 2D metallacycles and 3D metallacages where design ingenuity has been executed to afford energy harvesting by both donor ligands as well as metal acceptors.

Pt(II)/Pd(II)‐Based Metallosupramolecular Architectures as Light Harvesting Systems and their Applications

AbstractThe development of artificial light‐harvesting systems mimicking the natural photosynthesis method is an ever‐growing field of research. Numerous systems such as polymers, metal complexes, POFs, COFs, supramolecular frameworks etc. have been fabricated to accomplish more efficient energy transfer and storage. Among them, the supramolecular coordination complexes (SCCs) formed by non‐covalent metal‐ligand interaction, have shown the capacity to not only undergo single and multistep energy migration but also to utilize the harvested energy for a wide variety of applications such as photocatalysis, tunable emissive systems, encrypted anti‐counterfeiting materials, white light emitters etc. This review sheds light on the light‐harvesting behavior of both the 2D metallacycles and 3D metallacages where design ingenuity has been executed to afford energy harvesting by both donor ligands as well as metal acceptors.

Rhodium-Catalyzed Asymmetric Macrocyclization towards Crown Ethers Using Hydroamination of Bis(allenes).

Enantiomerically enriched crown ethers (CE) exhibit strong asymmetric induction in phase transfer catalysis, supramolecular catalysis and molecular recognition processes. Traditional methods have often been used to access these valuable compounds, which limit their diversity and consequently their applicability. Herein, a practical catalytic method is described for the gram scale synthesis of a class of chiral CEs (aza-crown ethers; ACEs) using Rh-catalyzed hydroamination of bis(allenes) with diamines. Using this approach, a wide range of chiral vinyl functionalized CEs with ring sizes ranging from 12 to 36 have been successfully prepared in high yields of up to 92 %, dr of up to >20 : 1 and er of up to >99 : 1. These vinyl substituted CEs allow for further diversification giving facile access to various CE derivatives as well as to their three-dimensional analogues using ring-closing metathesis. Some of these chiral CEs themselves display high potential for use in asymmetric catalysis.

Rhodium‐Catalyzed Asymmetric Macrocyclization towards Crown Ethers Using Hydroamination of Bis(allenes)

AbstractEnantiomerically enriched crown ethers (CE) exhibit strong asymmetric induction in phase transfer catalysis, supramolecular catalysis and molecular recognition processes. Traditional methods have often been used to access these valuable compounds, which limit their diversity and consequently their applicability. Herein, a practical catalytic method is described for the gram scale synthesis of a class of chiral CEs (aza‐crown ethers; ACEs) using Rh‐catalyzed hydroamination of bis(allenes) with diamines. Using this approach, a wide range of chiral vinyl functionalized CEs with ring sizes ranging from 12 to 36 have been successfully prepared in high yields of up to 92 %, dr of up to >20 : 1 and er of up to >99 : 1. These vinyl substituted CEs allow for further diversification giving facile access to various CE derivatives as well as to their three‐dimensional analogues using ring‐closing metathesis. Some of these chiral CEs themselves display high potential for use in asymmetric catalysis.

Covalent Post-Synthetic Modification of Metal-Organic Cages: Concepts and Recent Progress.

Metal-organic cages (MOCs) are supramolecular coordination complexes that have internal cavities for hosting guest molecules and exhibiting various properties. However, the functions of MOCs are limited by the choice of the building blocks. Post-synthetic modification (PSM) is a technique that can introduce new functional groups and replace existing ones on the MOCs without changing their geometry. Among many PSM methods, covalent PSM is a promising approach to modify MOCs with tailored structures and functions. Covalent PSM can be applied to either the internal cavity or the external surface of the MOCs, depending on the functionality expected to be customized. However, there are still some challenges and limitations in the field of covalent PSM of MOCs, such as the balance between the stability of MOCs and the harshness of organic reactions involved in covalent PSMs. This concept article introduces the organic reaction types involved in covalent PSM of MOCs, their new applications after modification, and summarizes and provides an outlook of this research field.

Breathing Metal-Organic Frameworks Supported by an Arsenic-Bridged 4,4'-Bipyridine Ligand.

Bent ligands bridged by heteroatoms have drawn significant interest as supramolecular coordination architectures. Traditionally, divalent group 16 elements are preferred over trivalent group 15 elements because of the anticipated steric hindrance. In this study, we explore metal-organic frameworks (MOFs) based on dipyridinoarsoles (DPAs), 4,4'-bipyridines bridged with an arsenic atom. An MOF with methyl-substituted DPA collapsed upon solvent removal, whereas that with phenyl-substituted DPA demonstrated breathing behavior due to guest molecule adsorption/desorption. In contrast, MOFs using the phosphorus analogue dipyridinophosphole exhibit inferior adsorption and lack breathing behavior. This is the first study to investigate the interplay among substituents, bridging elements, and dynamic behavior in MOFs using bent group 15 ligands.

A Nanoscale Trans-Platinum(II)-Based Supramolecular Coordination Self-Assembly with a Distinct Anticancer Mechanism.

Drug resistance significantly hampers the clinical application of existing platinum-based anticancer drugs. New platinum medications that possess distinct mechanisms of action are highly desired for the treatment of Pt-resistant cancers. Herein, a nanoscale trans-platinum(II)-based supramolecular coordination self-assembly (Pt-TCPP-BA) is prepared via using trans-[PtCl2(pyridine)(NH3)] (transpyroplatin), tetracarboxylporphyrin (TCPP), and benzoic acid (BA) as building blocks to combat drug resistance in platinum-based chemotherapy. Mechanistic studies indicate that Pt-TCPP-BA shows a hydrogen-peroxide-responsive dissociation behavior along with the generation of bioactive trans-Pt(II) and TCPP-Pt species. Different from cisplatin, these degradation products interact with DNA via interstrand cross-links and small groove binding, and induce significant upregulation of cell-death-related proteins such as p53, cleaved caspase 3, p21, and phosphorylated H2A histone family member X in cisplatin-resistant cancer cells. As a result, Pt-TCPP-BA exhibits potent killing effects against Pt-resistant tumors both in vitro and in vivo. Overall, this work not only provides a new platinum drug for combating drug-resistant cancer but also offers a new paradigm for the development of platinum-based supramolecular anticancer drugs.

The impact of environmentally friendly supramolecular coordination polymers as carbon steel corrosion inhibitors in HCl solution: synthesis and characterization

Two 3D-supramolecular coordination polymers (SCP1 & SCP2) have been synthesized and characterized by physicochemical and spectroscopic methods. In a solution of 1.0 M HCl, SCPs were used to prevent corrosion of carbon steel (CS). The inhibition productivity (%η) rises as the synthetic inhibitor dose rises, and the opposite is true as the temperature rises. The study was carried out using chemical (mass loss, ML) and electrochemical ( potentiodynamic polarization, PDP and electrochemical impedance microscopy, EIS) techniques, which showed %η reached to 93.1% and 92.5% for SCP1 & SCP2, respectively at 21 × 10−6 M, 25 °C. For the polarization results, SCPs behave as mixed-type inhibitors. With increasing doses of SCPs, the charge transfer resistance grew and the double layer's capacitance lowered. The creation of a monolayer on the surface of CS was demonstrated by the finding that the adsorption of SCPs on its surface followed the Henry adsorption isotherm. The parameters of thermodynamics were computed and explained. The physical adsorption of SCPs on the surface of CS is shown by the lowering values of free energy (∆Goads < − 20 kJ mol−1) and increasing the activation energy (E*a) values in presence of SCP1 & SCP2 than in their absence. Atomic force microscope (AFM) and scanning electron microscopy (SEM) demonstrated the development of a protective thin film of SCPs precipitated on the surface of CS. There is a strong matching between results obtained from experimental and theoretical studies. Results from each approach that was used were consistent.