Supradetachment Basin Research Articles

Tectono‐sedimentary evolution of high‐displacement crustal‐scale normal faults and basement highs on rifted margins: Klakk Fault Complex and Frøya High, Mid‐Norwegian Margin

AbstractCrustal‐scale high‐displacement (>10 km) normal faults are not captured in existing tectono‐sedimentary models of rift basins. We used 2D and 3D seismic reflection and well data to perform a structural and source‐to‐sink analysis of the southern part of the Klakk Fault Complex and the western part of the Vingleia Fault Complex, Mid‐Norwegian rifted margin. The north–south trending Klakk Fault Complex has a zig‐zag to sinuous plan‐view geometry, forming a series of structural recesses and salients along strike. In cross‐section, the fault complex has a listric to convex‐up or low‐angle planar geometry with displacements above 20 km. This fault complex exhumed basement highs, the Frøya High and Sklinna Ridge, in its footwall and created a series of supradetachment basins, for example, the Rås Basin, in its hanging wall. In contrast, the northeast‐southwest trending Vingleia Fault Complex has a zig‐zag geometry in plan view and planar to listric geometry in cross‐section and displacement of up to 5 km. This fault has the Frøya High in its footwall and the southern Halten Terrace in its hanging wall. Restoration of selected structural cross‐sections shows a prominent fault‐parallel ridge, up to 15 km east of the Klakk Fault Complex interpreted as a palaeodrainage divide. This divide separates steep drainages developed along the west‐dipping footwall scarp to the Klakk Fault Complex, from broader, gentler east‐dipping drainages up to ca. 10 km long developed on a back‐tilted dip slopes along the eastern side of the Frøya High and Sklinna Ridge. Progressive headward erosion of active flank catchments was enhanced around topographically elevated structural salients to the point of capturing previous dip‐slope‐directed drainages during the earliest Cretaceous. A network of submarine canyons develop down‐dip of the drainage catchments along the Klakk Fault Complex scarp, whose geometries and length are controlled by their location with respect to the structural salients or recesses, and the presence of fault terraces. The middle Jurassic‐earliest Cretaceous synrift deposits form two seismic sequences that are filled with five distinctive seismic facies that record the evolution from a linked normal fault during rift climax to a high‐displacement stage. During the high displacement stage, exhumed local continental core complexes formed structural salients, separated along strike by structural recesses at the heads of supradetachment basins. Key elements of the high‐displacement fault stage include (i) the development of structural salients at sites of rift climax displacement maxima, (ii) development of supradetachment basins in rift climax displacement minima and (iii) migration of major depocentres away from the centre of rift climax fault segments. We synthesise these observations into a generic tectono‐sedimentary model for high‐displacement faults.

Fluvial deposits of the Patlanoaya Group in southern Mexico: the stratigraphic record of an Early Mississippian supradetachment basin formed along the margin of Gondwana during the closure of the Rheic Ocean

ABSTRACT The Rheic Ocean closure stratigraphic record in southern Mexico is largely exposed in the Paleozoic Acatlán Complex. One of the most distinctive characteristics of the Acatlán Complex is the presence of high-pressure rocks, interpreted as remnants of the Rheic Ocean and the adjacent continental margin of Gondwana, which were subducted and then exhumed to the surface. Despite its importance in reconstructing the dynamics of the westernmost Rheic Ocean closure, the timing and mechanisms of exhumation of these high-pressure rocks remain debated. Some authors have tentatively interpreted the late Paleozoic, fluvial to marine succession of the Patlanoaya Group in southern Mexico as the sedimentary response to the exhumation of high-pressure rocks of the Acatlán Complex. Therefore, these sedimentary rocks may be particularly helpful in understanding the timing and evolution of high-pressure rocks exhumation during the Rheic Ocean closure. In this work, the tectono-sedimentary evolution of the continental deposits of the Patlanoaya Group was reconstructed, integrating sedimentologic, petrographic, and U-Pb detrital geochronological data to test the different scenarios proposed for the exhumation of the Acatlán Complex high-pressure rocks. Our data suggest that the lower Patlanoaya Group was deposited in an Early Mississippian basin with a two-stage evolution: a phase characterized by debris flow deposits derived from small-scale reliefs composed of low-grade metamorphic rocks and a subsequent phase marked by an NNE-trending fluvial system deposits sourced from low-metamorphic grade rocks of a mylonitic zone. Therefore, the lower Patlanoaya Group deposition was controlled by a major NNE-trending mylonitic shear zone associated with the development of a supradetachment basin linked to the progressive exhumation of high-pressure rocks during an Early Mississippian major extensional event. This work highlights the importance of sedimentary deposits in reconstructing the late Paleozoic history of the Acatlán Complex during the Rheic Ocean closure and the final stage of the Pangea assembly.

Upper-plate response to ridge subduction and oceanic plateau accretion, Washington Cascades and surrounding region: Implications for plate tectonic evolution of the Pacific Northwest (USA and southwestern Canada) in the Paleogene

Abstract The interaction between subduction zones and oceanic spreading centers is a common tectonic process, and yet our understanding of how it is manifested in the geologic record is limited to a few well-constrained modern and ancient examples. In the Paleogene, at least one oceanic spreading center interacted with the northwestern margin of North America. Several lines of evidence place this triple junction near Washington (USA) and southern British Columbia (Canada) in the early to middle Eocene, and we summarize a variety of new data sets that permit us to track the plate tectonic setting and geologic evolution of this region from 65 to 40 Ma. The North Cascades segment of the voluminous Coast Mountains continental magmatic arc experienced a magmatic lull between ca. 60 and 50 Ma interpreted to reflect low-angle subduction. During this period of time, the Swauk Basin began to subside inboard of the paleo-trench in Washington, and the Siletzia oceanic plateau began to develop along the Farallon plate–Kula plate or Farallon plate–Resurrection plate spreading center. Farther east, peraluminous magmatism occurred in the Omineca belt and Idaho batholith. Accretion of Siletzia and ridge-trench interaction occurred between ca. 53 and 49 Ma, as indicated by: (1) near-trench magmatism from central Vancouver Island to northwestern Washington, (2) disruption and inversion of the Swauk Basin during a short-lived contractional event, (3) voluminous magmatism in the Kamloops-Challis belt accompanied by major E-W extension east of the North Cascades in metamorphic core complexes and supra-detachment basins and grabens, and (4) southwestward migration of magmatism across northeastern Washington. These events suggest that flat-slab subduction from ca. 60 to 52 Ma was followed by slab rollback and breakoff during accretion of Siletzia. A dramatic magmatic flare-up was associated with rollback and breakoff between ca. 49.4 and 45 Ma and included bimodal volcanism near the eastern edge of Siletzia, intrusion of granodioritic to granitic plutons in the crystalline core of the North Cascades, and extensive dike swarms in the North Cascades. Transtension during and shortly before the flare-up led to >300 km of total offset on dextral strike-slip faults, formation of the Chumstick strike-slip basin, and subhorizontal ductile stretching and rapid exhumation of rocks metamorphosed to 8–10 kbar in the North Cascades crystalline core. By ca. 45 Ma, the Farallon–Kula (or Resurrection)–North American triple junction was likely located in Oregon (USA), subduction of the Kula or Resurrection plate was established outboard of Siletzia, and strike-slip faulting was localized on the north-striking Straight Creek–Fraser River fault. Motion of this structure terminated by 35 Ma. These events culminated in the establishment of the modern Cascadia convergent margin.

Tectonostratigraphic analysis of the syn-rift infill in the Drava Basin, southwestern Pannonian Basin System

The Drava Basin in the SW Pannonian Basin System (PBS) was initially formed by passive rifting with accompanying sedimentary infill. Although this has been the subject of much previous work, an account of tectonic control has been lacking. Based on cores, wire logging, and seismic data, the tectonostratigraphic interpretation, depositional systems, and control on depositional systems of the syn-rift infill of the eastern part of the Drava Basin were studied. The rifting phase is characterised by the formation of half-grabens, grabens, a sag, and supradetachment basin structures with structural ramp and structural highs. The syn-rift infill can be divided into second-order tectonostratigraphic sequences corresponding to the early and late rift stages. The second-order sequences are further subdivided into third-order tectonostratigraphic sequences formed in response to higher-order tectonic events associated with local rift migration. In contrast to the early-stage structures, the late-stage rift structures are primarily controlled by extensional detachments that represent parts of the Drava Rift Fault System (DRFS). The early syn-rift is characterised by continental deposition through alluvial fans, fan deltas, and lacustrine environments. The late syn-rift stage is characterised by marine deposition in shallow water, fan deltas, and submarine slope-aprons, with deep marine sedimentation and intense volcanic activity. The ramp, basin slopes, and fault scarp slopes represent the major sediment transport pathways involved in the formation of alluvial fans, fan deltas, or submarine slope-aprons. Basinal sedimentation and major depocenters are located within synforms formed by structural lows in the geometry of extensional detachments. This study gives an example of syn-rift tectonic control for the SW part of the PBS and the influence of detachment geometry on basin fill. We have presented an approach based on 3D seismostratigraphic interpretation of tectonostratigraphic sequences, and the correlation of seismic facies with depositional environments developed in a back-arc setting.

3D Evolution of Detachment Fault Systems in Necking Domains: Insights From the Klakk Fault Complex and the Frøya High, Mid‐Norwegian Rifted Margin

AbstractDetachment fault systems typically record displacements in the order of 10s of kilometers. The principles that control the growth of smaller magnitude normal faults are not fully applicable to the evolution of detachment fault systems. We use interpretation of 2D and 3D seismic reflection data from the mid‐Norwegian rifted margin to investigate how the structural evolution of a detachment fault interacted with the effects of isostatic footwall rollback to produce complex 3D geometries and control the configuration of associated supradetachment basins. We further investigate the effects of lateral interaction and linkage of extensional detachment faults on the necking domain configuration. In our study area, the domain‐bounding Klakk Fault Complex demonstrates how successive incision may induce a complex structural relief in response to faulting and fault plane folding. We interpret the previously proposed metamorphic core complex within its footwall as an extension‐parallel turtleback‐structure. The now eroded turtleback is flanked by a major supradetachment basin, connecting two main basin segments. We attribute footwall‐ and turtleback exhumation to Middle Jurassic‐Early Cretaceous rifting. The study area further demonstrates how detachment fault geometries can change during rifting and lead to the formation of younger, successively incising fault splays. Lateral linkage between the original detachment fault plane and these fault splays enables displacement along a detachment fault system consisting of fault segments generated at different stages in time. Implicitly, detachment faults are complex 3D systems that change configuration during their evolution, perpetually controlling associated basin formation, footwall configuration, subsidence and uplift patterns.

Fault growth and orthogonal shortening in transtensional supradetachment basins: Insights from the ‘Old Red’ of western Norway

AbstractFor basins that evolve adjacent to large‐magnitude normal faults, tectonic controls on sedimentation involve isostatic back rotation of an exhuming footwall and, commonly, the evolution of kilometre‐scale extension‐parallel folds. Based on observations from classic localities in western Norway, we propose a three‐stage evolution scenario for transtensional supradetachment basins where the basins become progressively re‐arranged because of core complex exhumation and subsequent orthogonal shortening. Extension‐parallel transverse synclines initially form due to a normal displacement gradient, but when displacements accumulate beyond a certain magnitude, the hanging wall increasingly responds to core complex exhumation and the original depocentre, formed close to the original area of maximum displacement, will become inverted and dismembered above the core complex. Two new synclinal depocentres will develop along the flanks. Because these synclines form by extensional fault growth rather than by shortening, they will be associated with widening of the basin and onlap onto basement at high angles to the maximum elongation trend with overall grain‐size decrease and retrogradational stacking patterns. Further, because these synclines grow away from the evolving core complex, sedimentary units will become asymmetrically distributed inside each syncline in such a way that the oldest deposits in the syncline will be preserved on the flank most proximal to the core complex. In transtensional environments, a third evolutionary stage may involve constrictional strain where extension‐parallel folds and reverse faults produced by orthogonal shortening enhance or interact with other structures. Ultimately, initial extensional sub‐basins may become warped across extension‐parallel folds. Hanging wall deformation will be manifested in shifting accommodation patterns, with depocentres that generally migrate in the direction of the detachment fault. Accommodation patterns initially related to megafault growth may conceptually evolve into depocentres controlled by orthogonal shortening.

Formation and Evolution of Supradetachment Basins During Continental Extension: Insights From the Fuxin Basin in NE China

Supradetachment basins can record the stratigraphy and development of metamorphic core complexes (MCCs). The Fuxin supradetachment basin, which lies immediately to the west of the Yiwulvshan MCC in NE China, provides an excellent opportunity to establish the relationship between supradetachment basins and MCCs. In this study, we conducted field investigations, sedimentary facies analysis, and seismic profile interpretation to decipher the sedimentary processes and structural evolution of the basin and link them to the development of the Yiwulvshan MCC. The Fuxin Basin is filled predominantly by syn-rift volcanic sedimentary and post-rift clastic rocks, which developed in four stages, namely, proto-rift, fault subsidence, transition, and compression. The Fuxin Basin developed simultaneously with the two stages (earlier faulting-dominated and later exhumation stages) of development of the MCC. Erosion of the core of the Yiwulvshan MCC provided clastic material to the Fuxin Basin. Based on multi-stage reconstruction of the formation and evolution of the Fuxin Basin and Yiwulvshan MCC, we propose that rollback of the Paleo-Pacific Plate and retreat of the subduction trench provided the geodynamic setting for the crustal extension that formed the basin and MCC.

Supradetachment basins in necking domains of rifted margins: Insights from the Norwegian Sea

AbstractSupradetachment basins at passive rifted margins are a key witness of major‐continental extension, and they may preserve a record from which the amount and rates of extension and metamorphic core complex exhumation may be reconstructed. These basins have mainly been recognised in back‐arc and orogenic collapse settings, with few examples from rifted margins. Using 2D and 3D seismic reflection, wellbore, and gravity anomaly data, we here characterise the three‐dimensional structural and tectonosedimentary evolution of a spoon‐shaped supradetachment basin that was formed in the necking domain of a rifted margin, at the southern limit of the Møre and Vøring segments of the Norwegian rifted margin. The basin, with an areal extent of ca. 2400 km2, and a landward‐rotated syn‐tectonic succession up to ca. 30 km thick (true stratigraphic thickness), is separated from footwall continental margin core complex basement culminations by major large‐offset (>30 km) normal fault complexes characterised by a cross‐sectional geometry whereby an upper, steeper part of the fault gives way to a low‐angle detachment fault at depth. These fault complexes are associated with a tectonic thinning of the continental crust to ca. 11 km, compared with a crustal thickness of ca. 27 km in the proximal domain. The basin is filled by a succession of pre‐, syn‐ and post‐tectonic deposits, that accumulated over time as the basin evolved over a series of rift‐ and detachment faulting events. The 30 km thick syn‐tectonic succession reflects deposition during two separate rifting events, which are disconnected by deposits reflecting a relative short period of tectonic quiescence. The results are discussed in light of examples of supradetachment basins on other rifted margins globally, as well as in the context of the evolution of the Norwegian margin overall.

Late Paleozoic supradetachment basin configuration in the southwestern Barents Sea—Intrabasement seismic facies of the Fingerdjupet Subbasin

AbstractLate to post‐Caledonian, Devonian extension remains unresolved in the SW Barents Sea, despite considerable knowledge from onshore Norway, East Greenland and Svalbard. We analyse intrabasement seismic facies in high‐resolution 3D and reprocessed 2D data to investigate evidence for Caledonian deformation and post‐Caledonian detachment faulting in the central SW Barents Sea. These results are compared to published potential field models and analogue field studies from onshore Svalbard and Bjørnøya, substantiating that structures inherited from post‐orogenic extension influenced the Late Paleozoic and Mesozoic basin evolution. The Late Paleozoic Fingerdjupet Subbasin is underlain by a NNE‐striking, ESE‐dipping extensional detachment fault that records a minimum eastwards displacement of 22 km. The detachment fault and associated shear zone(s) separate post‐orogenic metamorphic core complexes from the syn‐tectonic deposits of a presumed Devonian supradetachment basin. Spatial variability in isostatically induced doming likely governed Devonian basin configurations. Pronounced footwall corrugations and faults splaying from the detachment indicate eastward extensional transport. This ultimately led to two interacting but subsequent, east‐stepping detachments. Local reactivation of the detachment systems controlled the extent of Carboniferous carbonate and evaporite basins in the Bjarmeland Platform area. Further, the Mesozoic Terningen Fault Complex and Randi Fault Set testify to how the inherited Devonian structural template continued to control spatial localisation and extent of rift structures during subsequent periods of extensional faulting in the Fingerdjupet Subbasin.

Basement-decoupled hyperextension rifting: The tectono-stratigraphic record of the salt-rich Pyrenean necking zone (Arzacq Basin, SW France)

AbstractHalf grabens and supra-detachment basins correspond to end-member basin types of magma-poor rift settings, each of them showing a characteristic stratigraphic architecture. The occurrence of a basement-cover décollement has been shown to drastically change the stratigraphic architecture of half graben basins, however, the effect of such basement-cover décollement remains to be documented in supra-detachment basins formed during hyper-extension. We investigate the tectono-stratigraphic record of the Arzacq Basin (SW France) recording the formation of a salt-rich Cretaceous hyperextended rift system. Combining 2-D and 3-D seismic reflection calibrated from well data, we show that this basin is an asymmetric syn-rift extensional syncline growing above a pre-kinematic salt layer. By mapping the sub-salt basement, we show that the formation of this syncline is controlled by the South-Arzacq Fault (SAF), soling in the sub-salt basement. Based on crosscutting relationships and the observed southward migration of syn-rift depocenters, this N110°-striking, 20°-dipping structure accommodates >10 km of thick-skinned extension. The overlying supra-salt cover coherently glided, following the basement geometry. The 3-D segmentation of the SAF and the sub-salt stratigraphic architecture of the Arzacq Basin suggest a roughly dip-slip kinematic. A post-kinematic kilometer-scale uplift is documented on the southern side of the Arzacq Basin. It may result from the increasing lithospheric thinning and thermal support at the end of asymmetric hyperextension. As salt commonly occurs in extensional settings, we believe that our description of the tectono-stratigraphic record of a basement-decoupled supra-detachment basin has global applicability to unleash the tectono-stratigraphic evolution of worldwide hyper-extended rifted margins.

Early post-rift confined turbidite systems in a supra-detachment basin: Implications for the early to middle Miocene basin evolution and hydrocarbon exploration of the Pannonian Basin

Understanding the interplay of sedimentation and deformation style is essential to develop an adequate model of the evolutionary history of an extensional sedimentary basin. Due to their volume and temporal extent, late post-rift deposits are often in the focus of research; however, early post-rift deposits are less studied. The aim of the study is to reconstruct the tectono-sedimentary evolution of a syn -rift to early post-rift succession in the hanging wall of a low-angle detachment zone and to recognize the effects of this deformation style on turbidity current pathways and depocenters. The small Őri sub-basin of the western part of the Miocene Pannonian basin is used as a study area where the oldest early post-rift turbidites of ~15–12.8 Ma occurred. These sediments were deposited in a supradetachment setting, where inherited and actively forming structures controlled the sediment pathways and accommodation of both the distally and locally sourced marine turbidites. Seismic data, well logs and core information were integrated to identify and analyze unconformities, structural elements, and turbidite deposits. Syn-rift, early post-rift and late post-rift system tracts were identified. The syn -rift/post-rift unconformity is a result of combined eustatic sea level drop and the change in deformation intensity. The main low-angle detachment fault, orthogonal hanging wall transfer faults and related folds together controlled the complex synformal shape of the basin, which was related to major corrugations of the footwall detachment. Four turbidite phases were distinguished based on upward increasing sand content, areal extent, reservoir quality, and degree of confinement as the turbidity currents reached the basin margins. (1) Small fans deflected by transfer faults developed, followed by (2) an axial turbidite system that reached an anticline and was deflected by it. (3) Lateral confinement by the anticline increased significantly and thick sandstone bodies with abrupt pinch-outs formed, while the influence of smaller faults diminished. (4) The axial turbidite systems covered the basin floor and their interaction with basin margins created continuous sand bodies of confined character. The sand fairways and types of confinement of a supra-detachment basin differ from high-angle normal fault systems. The exhumed metamorphic rocks provided the sediment, and the extension-parallel antiformal and synformal corrugations acted as lateral confinement. The gentle back-tilt of the detachment hanging wall block exerted a frontal confinement for the extensive turbidite system at the distal part of the basin, but the gentle NE-ward dip over the detachment still permitted long run-out distances. • Combination of eustasy and tectonics leads to syn-rift-early post-rift unconformity. • Corrugation fold of a detachment creates an intricate topography for sediment flows. • Deformation activity decreases during deposition of early post-rift turbidites. • Lateral, frontal confinement of turbidity currents controls reservoirs quality. • Differences between sand fairways in high- and low-angle extensional systems.

Crustal exhumation and depocenter migration from the Alpine orogenic margin towards the Pannonian extensional back-arc basin controlled by inheritance

The formation and deformation history of back-arc basins play a critical role in understanding the tectonics of plate interactions. Furthermore, opening of extensional back-arc basins during the overall convergence between Africa and Europe is a fundamental process in the overall tectonic evolution of the Mediterranean and adjacent areas. In this frame, Miocene tectonic evolution of the western Pannonian Basin of Central Europe and its connection to inherited Cretaceous structures of the Eastern Alpine nappes are presented. Revision of published and addition of new structural and thermochronological data, as well as seismic profiles from the western Pannonian Basin is complemented by high-resolution thermo-mechanical numerical modeling in order to propose a new physically consistent tectono-sedimentary model for the basin evolution. The onset of extension is dated as ~25–23 Ma, and higher rates are inferred between 19 and 15 Ma at the south-western part of the area (Pohorje, Kozjak Domes, Murska Sobota Ridge, and Mura-Zala Basin). Rift initiation involved the exhumation of the middle part of the Austroalpine nappe pile along low-angle detachment faults and mylonite zones. The Miocene low-angle shear zones could reactivate major Cretaceous thrust boundaries, the exhumation channel of ultra-high-pressure rocks of the Pohorje Dome, or Late Cretaceous extensional structures. Miocene extension was associated with granodiorite and dacite intrusions between 18.64 and 15 Ma. The Pohorje pluton intruded at variable depth from ~4 to 16–18 km and experienced ductile stretching, westward tilting, and asymmetric exhumation of its eastern side. Terrestrial early Miocene (Ottnangian to Karpatian, 19–17.25 Ma) syn-rift depositional environment in supradetachment basins evolved to near-shore and bathyal one by the middle Miocene (Badenian, 15.97–12.8 Ma). Deformation subsequently migrated eastwards to the western part of the Transdanubian Range (Keszthely Hills) and to newly formed grabens. In this formerly emerged terrestrial area active faulting started at 15–14.5 Ma and continued through the late Miocene almost continuously up to ~8 Ma but basically terminated in the Mura-Zala Basin by ~15 Ma (early Badenian). These observations suggest a ~200 km shift of active faulting, basin formation, and related syn-tectonic sedimentation from the SW (Pohorje and Mura-Zala Basin) toward the Pannonian Basin center. Building on the above described observational and modeling data makes the Pannonian Basin an ideal natural laboratory for understanding the coupling between deep Earth and surface processes.

Two-phase Himalayan extension recorded in the Late Miocene-Pleistocene Gyirong Basin, south Tibet

The Late Miocene-Pleistocene Gyirong Basin in the central Himalaya provides a record of basin evolution in response to tectonic extension within the active Himalaya orogen. The up to ~550-m-thick basin fill can be subdivided, from bottom to top, into four stratigraphic units with distinctly different lithofacies associations: alluvial fan, debris flow, lacustrine-fan delta, and braided river. Analysis of the stratigraphic pattern, provenance, and detrital zircon UPb geochronology of the basin fill indicates significant changes of depositional sources and tectonic boundary conditions through time. The alluvial fan deposits in the Oma sub-basin, which unconformably overlie the Tethyan strata, show northward paleoflow directions, detrital zircon UPb ages >400 Ma, and low subsidence rates. The unconformably overlying debris conglomerates show westward paleoflow directions, younger detrital zircon UPb ages of 15–37 Ma, and high subsidence rates. The abrupt changes in depositional source and tectonic subsidence indicate that the basin evolved from a supradetachment basin related to east-trending northward normal faults in the hanging wall of the South Tibetan Detachment to a rift basin that was mainly controlled by a major north-trending normal fault along the eastern basin margin from ~10–9 Ma onwards. We propose that initial basin formation is the result of N-S extension related to faulting along the South Tibetan Detachment, which was immediately followed by E-W extension of the Himalaya orogen in response to decoupling of the Himalayan crust related to India underthrusting beneath Asia.

Rifting of Collapsed Orogens: Successive Incision of Continental Crust in the Proximal Margin Offshore Norway

AbstractStructures related to orogenic “collapse” may provide an important template for reactivation during later rifting. In the proximal rifted margin offshore Norway, the tectono‐sedimentary template related to collapse of the Caledonian mountain belt became widely eroded but inherited metamorphic core complexes and detachment faults evolved further in Late Paleozoic and Earliest Mesozoic time and became associated with very significant crustal thinning. The earliest rifting mode was dominated by structures that mimic the Devonian post‐Caledonian template and comprised a suite of Late Paleozoic to Early Triassic metamorphic core complexes, detachment faults, and supradetachment basins. The deep structure indicates necking of brittle over remnant ductile crust, and we document how the main decoupling level utilized by the earliest rifting structures were cut by a suite of steeper, more deeply incising set of seaward‐ and landward‐dipping Triassic faults. The latter exploited deep shear zones related to the previous intracrustal necking, enabling changes in polarity over short distances. The change from a core complex mode of extension to one involving more deeply incising faults took place prior to deposition of the Late Triassic‐Early Jurassic interrift succession and pre‐dated the main phase of lithospheric‐scale necking associated with Jurassic‐Cretaceous extension. The latter phase of large‐magnitude faulting commenced with reactivation of seaward‐dipping, deeply incised faults inherited from early rifting as well as structures related to the phase of Devonian post‐orogenic transtension. The current study demonstrates that great structural complexity and significant magnitudes of extension may be present in proximal margins, in particular those developed along collapsed orogens.

Determining the source of placer gold in the Anaconda metamorphic core complex supradetachment basin using detrital zircon U-Pb geochronology, western Montana, USA

Abstract Despite the widespread occurrence and economic significance of gold placer deposits, modern provenance studies of placer sediments remain largely qualitative. This study applies detrital zircon (DZ) geochronology to determine the source of zircon in placer deposits. We then evaluate the provenance of the zircon to assess whether the gold might have been derived from the same sources, thereby providing a case study of the use of DZ geochronology applied to placers. We present a new set of DZ U-Pb ages (n = 1058) and Lu-Hf (n = 61) isotopic data from four placer deposit samples collected from the Pioneer District of western Montana (USA). Each of the four samples yielded similar age spectra, with a range of U-Pb ages between 3000 and 25 Ma. We interpret that ≥250 Ma zircons were recycled from the Mesoproterozoic Belt Supergroup, Paleozoic–Mesozoic sedimentary rocks, and the Upper Cretaceous–Paleocene Beaverhead Group. Our 237 DZ U-Pb ages ≤250 Ma reveal two prominent age-probability peaks centered at ca. 69 Ma and ca. 26 Ma, which we interpret to record first-cycle derivation from the Royal stock and nearby Dillon Volcanics, respectively. We evaluate these data using an inverse Monte Carlo DZ unmixing model that calculates relative contributions from plausible source units, determining a 12% contribution from the Royal stock and a 43% contribution from the Beaverhead Group. A current absence of the Beaverhead Group in the hypothesized source region suggests complete erosion of the unit into the placer-bearing basin. Detrital zircon geochronology, Hf isotopic data, and the unmixing modeling results offer the first zircon-based support for previous interpretations that the Late Cretaceous Royal stock precipitated gold along its contact with overlying Proterozoic–Mesozoic sedimentary strata. Subsequent exhumation and erosion of the lode source led to gold deposition in the Anaconda metamorphic core complex supradetachment basin during the late Oligocene–late Miocene. The worldwide occurrence of gold placer deposits with unknown source areas provides abundant opportunity to apply these techniques elsewhere.

From Caledonian Collapse to North Sea Rift: The Extended History of a Metamorphic Core Complex

AbstractExtensional systems evolve through different stages due to changes in the rheological state of the lithosphere. It is crucial to distinguish ductile structures formed before and during rifting, as both cases have important but contrasting bearings on the structural evolution. To address this issue, we present the illustrative ductile‐to‐brittle structural history of a metamorphic core complex (MCC) onshore and offshore western Norway. Combining geological field mapping with newly acquired 3‐D seismic reflection data, we correlate two distinct onshore basement units (BU1 and BU2) to corresponding offshore basement seismic facies (SF1 and SF2). Our interpretation reveals two 40 km wide domes (one onshore and one offshore), which both show characteristic kilometer‐scale, westward plunging upright folds. The gneiss domes fill antiformal culminations in the footwall of a >100 km long, shallowly west dipping, extensional detachment. Overlying Caledonian nappes and Devonian supradetachment basins occupy saddles of the hyperbolic detachment surface. Devonian collapse of the Caledonian orogen formed dome and detachment geometries. During North Sea rifting, brittle reactivation of the MCC resulted in complex fault patterns deviating from N‐S strike dominant at the eastern margin of the rift. Around 61°N, only minor N‐S faults (<100 m throw) cut through the core of the MCC. Major rift faults (≤5 km throw), on the other hand, reactivated the detachment and follow the steep flanks of the MCC. This highlights that inherited ductile structures can locally alter the orientation of brittle faults formed during rifting.

South China Sea documents the transition from wide continental rift to continental break up

During extension, the continental lithosphere thins and breaks up, forming either wide or narrow rifts depending on the thermo-mechanical state of the extending lithosphere. Wide continental rifts, which can reach 1,000 km across, have been extensively studied in the North American Cordillera and in the Aegean domain. Yet, the evolutionary process from wide continental rift to continental breakup remains enigmatic due to the lack of seismically resolvable data on the distal passive margin and an absence of onshore natural exposures. Here, we show that Eocene extension across the northern margin of the South China Sea records the transition between a wide continental rift and highly extended (<15 km) continental margin. On the basis of high-resolution seismic data, we document the presence of dome structures, a corrugated and grooved detachment fault, and subdetachment deformation involving crustal-scale nappe folds and magmatic intrusions, which are coeval with supradetachment basins. The thermal and mechanical weakening of this broad continental domain allowed for the formation of metamorphic core complexes, boudinage of the upper crust and exhumation of middle/lower crust through detachment faulting. The structural architecture of the northern South China Sea continental margin is strikingly similar to the broad continental rifts in the North American Cordillera and in the Aegean domain, and reflects the transition from wide rift to continental breakup.

Supradetachment to rift basin transition recorded in continental to marine deposition; Paleogene Bandar Jissah Basin, NE Oman

AbstractA transition from supradetachment to rift basin signature is recorded in the ~1,500 m thick succession of continental to shallow marine conglomerates, mixed carbonate‐siliciclastic shallow marine sediments and carbonate ramp deposits preserved in the Bandar Jissah Basin, located southeast of Muscat in the Sultanate of Oman. During deposition, isostatically‐driven uplift rotated the underlying Banurama Detachment and basin fill ~45° before both were cut by the steep Wadi Kabir Fault as the basin progressed to a rift‐style bathymetry that controlled sedimentary facies belts and growth packages. The upper Paleocene to lower Eocene Jafnayn Formation was deposited in a supradetachment basin controlled by the Banurama Detachment. Alluvial fan conglomerates sourced from the Semail Ophiolite and the Saih Hatat window overlie the ophiolitic substrate and display sedimentary transport directions parallel to tectonic transport in the Banurama Detachment. The continental strata grade into braidplain, mouth bar, shoreface and carbonate ramp deposits. Subsequent detachment‐related folding of the basin during deposition of the Eocene Rusayl and lower Seeb formations marks the early transition towards a rift‐style basin setting. The folding, which caused drainage diversion and is affiliated with sedimentary growth packages, coincided with uplift‐isostasy as the Banurama Detachment was abandoned and the steeper Marina, Yiti Beach and Wadi Kabir faults were activated. The upper Seeb Formation records the late transition to rift‐style basin phase, with fault‐controlled sedimentary growth packages and facies distributions. A predominance of carbonates over siliciclastic sediments resulted from increasing near‐fault accommodation, complemented by reduced sedimentary input from upland catchments. Hence, facies distributions in the Bandar Jissah Basin reflect the progression from detachment to rift‐style tectonics, adding to the understanding of post‐orogenic extensional basin systems.

Büyük Menderes Granbeni'nin Rolling Hinge (Yuvarlanan Reze) Modelinde Supra-Detachment (Sıyrılma Üstü) Havzadan Rift Havzasına Evrimi

Two types of basins developed in the Western Anatolian extensional tectonic system during the Miocene- Quaternary interval, supra-detachment and rift basins, in the form of a rolling-hinge mechanism. In this study, stratigraphic and structural data on the presence of a rolling-hinge model in the area between Buharkent-Buldan on the northern edge of the Buyuk Menderes Graben are presented for the first time and the geological evolution of the graben is discussed. In the light of obtained field data, the Miocene-Quaternary sequences deposited on the northern edge of the Buyuk Menderes Graben were evaluated under 4 main sedimentary packages, which are separated from each other by angular and/or intrabasinal unconformities. These are the Lower-Middle Miocene (1st Package) and the Middle-Upper Miocene (2nd Package) which were deposited in the supra-detachment basin, and the Plio- Quaternary 3rd and 4th packages formed in the rift basin. The structural elements that provide the basin formation and deformation of the region are the Miocene Buyuk Menderes Detachment Fault, the Pio-Quaternary Gokdere Fault, and the Holocene Buharkent Fault Segment that cuts the youngest graben basin-fill located in the most eastern part of the Buyuk Menderes Fault System. The main fault contacts of the supra-detachment basins characterizing the Miocene period are represented by a structural boundary of gneisses and schists belonging to the Menderes Massif, which is a relict of the effective compressional tectonic products of the Eocene–Oligocene interval. Due to the effectiveness of low-angle faults in the Menderes Massif until the end of Pliocene, a high rate of extension occurred; because of this, the crust thickness was reduced. As a result of cooling of the crust during Quaternary, the supra-detachment basin system was replaced by a rift system and the Menderes Massif was divided into blocks along the high-angle boundary faults of the rift basin. Field observations and kinematic analysis reveal that tectonic structures on the northern margin of the Buyuk Menderes Graben evolved from low-angle to high-angle normal faulting, and were rejuvenated southward parallel to the basin propagation in a rolling-hinge model. Thus, the basin formation also evolved from being supra-detachment to the rift type.

Late Cenozoic tectono-sedimentary evolution of the Ulukışla Basin: progressive basin development in south-central Turkey

The Ulukisla Basin is one of the most important late Cretaceous-Cenozoic basins in central Anatolia. The basin is surrounded by the Bolkar Mountains of Tauride Platform in the south, the Nigde Massif of Central Anatolian Crystalline Complex to the north, and the Ecemis Fault Zone and Aladag Mountains in the east. The fact that time interval proposed for the formation of Ulukisla Basin is quite wide and more than one tectonic regime prevailed in the region, have led to various suggestions concerning the evolution of the basin. While the suggestions majorly examine the character of the basin during the late Cretaceous-early Cenozoic, the number of detailed studies on the status of the basin in the late Cenozoic is limited. In this study, we focused on the less-studied late Cenozoic evolution to differentiate the tectonic phases that controlled the development of Ulukisla Basin through structural data, and elaborate the responses of sedimentation and paleogeography during this period through detailed facies analyses. Our findings indicate that the Ulukisla Basin, which started to develop as a supradetachment basin in the late Cretaceous, has continued its extensional development progressively during its Cenozoic history. While the relatively well-studied early Cenozoic sequences represent a marine environment that was rapidly changed shallow- to deep-sea environment and then gained a shallow character by the middle Eocene, sedimentary features and fossil contents of the late Cenozoic units characterize deposition started in a paralic environment changing into a terrestrial environment rapidly, as a result of isolation by the uplifting of surrounding topographies while the basin continues its development under an extensional tectonic regime. However, the extensional basin history surceased in post-middle Eocene and post-middle Miocene, probably caused by the closing processes of the different branches of Neotethys Ocean.