Superconducting Microwave Cavity Research Articles

Long-range two-hybrid-qubit gates mediated by a microwave cavity with red sidebands

Implementing two-qubit gates via strong coupling between quantum-dot qubits and a superconducting microwave cavity requires achieving coupling rates that are much faster than decoherence rates. Typically, this involves tuning the qubit either to a sweet spot, where it is relatively insensitive to charge noise, or to a point where it is resonant with the microwave cavity. Unfortunately, such operating points seldom coincide. Here, we theoretically investigate several schemes for performing gates between two quantum-dot hybrid qubits, mediated by a microwave cavity. The rich physics of the quantum dot hybrid qubit gives rise to two types of sweet spots, which can occur at operating points with strong charge dipole moments. Such strong interactions provide new opportunities for off-resonant gating, thereby removing one of the main obstacles for long-distance two-qubit gates. Our results suggest that the numerous tuning knobs of quantum dot hybrid qubits make them good candidates for strong coupling. In particular, we show that off-resonant red-sideband-mediated two-qubit gates can exhibit fidelities $>$95\% for realistic operating parameters, and we describe improvements that could potentially yield gate fidelities $>$99\%.

Seamless High- Q Microwave Cavities for Multimode Circuit Quantum Electrodynamics

Multimode cavity quantum electrodynamics-where a two-level system interacts simultaneously with many cavity modes-provides a versatile framework for quantum information processing and quantum optics. Because of the combination of long coherence times and large interaction strengths, one of the leading experimental platforms for cavity QED involves coupling a superconducting circuit to a 3D microwave cavity. In this work, we realize a 3D multimode circuit QED system with single photon lifetimes of 2ms across 9 modes of a novel seamless cavity. We demonstrate a variety of protocols for universal single-mode quantum control applicable across all cavity modes, using only a single drive line. We achieve this by developing a straightforward flute method for creating monolithic superconducting microwave cavities that reduces loss while simultaneously allowing control of the mode spectrum and mode-qubit interaction. We highlight the flexibility and ease of implementation of this technique by using it to fabricate a variety of 3D cavity geometries, providing a template for engineering multimode quantum systems with exceptionally low dissipation. This work is an important step towards realizing hardware efficient random access quantum memories and processors, and for exploring quantum many-body physics with photons.

Coherently amplifying photon production from vacuum with a dense cloud of accelerating photodetectors

An accelerating photodetector is predicted to see photons in the electromagnetic vacuum. However, the extreme accelerations required have prevented the direct experimental verification of this quantum vacuum effect. In this work, we consider many accelerating photodetectors that are contained within an electromagnetic cavity. We show that the resulting photon production from the cavity vacuum can be collectively enhanced such as to be measurable. The combined cavity-photodetectors system maps onto a parametrically driven Dicke-type model; when the detector number exceeds a certain critical value, the vacuum photon production undergoes a phase transition from a normal phase to an enhanced superradiant-like, inverted lasing phase. Such a model may be realized as a mechanical membrane with a dense concentration of optically active defects undergoing gigahertz flexural motion within a superconducting microwave cavity. We provide estimates suggesting that recent related experimental devices are close to demonstrating this inverted, vacuum photon lasing phase.

Enhancing spin-photon coupling with a micromagnet

Hybrid quantum systems involving solid-state spins and superconducting microwave cavities play a crucial role in quantum science and technology, but improving the spin-photon coupling at the single quantum level remains challenging in such systems. Here, we propose a simple technique to strongly couple a single solid-state spin to the microwave photons in a superconducting coplanar waveguide (CPW) cavity via a magnetic microsphere. We show that, strong coupling at the single spin level can be realized by virtual magnonic excitations of a nearby micromagnet. The spin-photon coupling strength can be enhanced up to typically four orders of magnitude larger than that without the use of the micromagnet. This work can find applications in quantum information processing with strongly coupled solid-state spin-photonic systems.

Nanomechanical Microwave Bolometry with Semiconducting Nanowires

Microwave loss of a semiconducting nanowire implemented in a cavity electromechanical system enables bolometric-microwave-power measurements at millikelvin temperatures. This hybrid system consists of a superconducting microwave cavity capacitively coupled to a suspended $\mathrm{In}\mathrm{As}$ nanowire. As a constant voltage is applied across a vacuum gap between the nanowire and the bottom electrode, the nanowire resistance embedded in the microwave resonator follows its own mechanical vibration. The mechanically modulated resistance of the nanowire contributes to microwave sidebands exhibiting its mechanical resonance. The presence of this resistive component provides the device with enhanced sensitivity to microwave dissipation. This dissipation localized at the nanowire results in a temperature increase, producing a frequency shift of the mechanical resonance sensitive to the microwave power. We employ a circuit model to demonstrate that semiconducting nanowires provide optimal resistances for the nanomechanical microwave bolometry. Our technique could benefit precision microwave measurements in quantum-device research.

Non-Markovian decoherence dynamics of strong-coupling hybrid quantum systems: A master equation approach

Based on the recent experiments on the hybrid quantum system of a superconducting microwave cavity coupling strongly to an inhomogeneous broadening spin ensemble under an external driving field, we use the exact master equation approach to investigate its non-Markovian decoherence dynamics. Here the spin ensemble is made by negatively charged nitrogen-vacancy (NV) defects in diamond. Our exact master equation theory for open systems depicts the experimental decoherence results and reveals the mechanism how the decoherence induced by the inhomogeneous broadening is suppressed in the strong-coupling regime. Moreover, we show how the spectral hole burning generates localized states to further suppress the cavity decoherence. We also investigate the two-time correlations in this system to further show how quantum fluctuations manifest quantum memory.

Bidirectional Electro-Optic Wavelength Conversion in the Quantum Ground State

Fiber optic communication is the backbone of our modern information society, offering high bandwidth, low loss, weight, size and cost, as well as an immunity to electromagnetic interference. Microwave photonics lends these advantages to electronic sensing and communication systems, but - unlike the field of nonlinear optics - electro-optic devices so far require classical modulation fields whose variance is dominated by electronic or thermal noise rather than quantum fluctuations. Here we present a cavity electro-optic transceiver operating in a millikelvin environment with a mode occupancy as low as 0.025 $\pm$ 0.005 noise photons. Our system is based on a lithium niobate whispering gallery mode resonator, resonantly coupled to a superconducting microwave cavity via the Pockels effect. For the highest continuous wave pump power of 1.48 mW we demonstrate bidirectional single-sideband conversion of X band microwave to C band telecom light with a total (internal) efficiency of 0.03 % (0.7 %) and an added output conversion noise of 5.5 photons. The high bandwidth of 10.7 MHz combined with the observed very slow heating rate of 1.1 noise photons s$^{-1}$ puts quantum limited pulsed microwave-optics conversion within reach. The presented device is versatile and compatible with superconducting qubits, which might open the way for fast and deterministic entanglement distribution between microwave and optical fields, for optically mediated remote entanglement of superconducting qubits, and for new multiplexed cryogenic circuit control and readout strategies.

Coherent coupling of a trapped electron to a distant superconducting microwave cavity

We theoretically investigate the coupling of a single electron in a planar Penning trap with a remote superconducting microwave (MW) cavity. Coupling frequencies around Ω=2π·1 MHz can be reached with resonators with a loaded quality factor of Q=105, allowing for the strong coupling regime. The electron and the cavity form a system of two coupled quantum harmonic oscillators. This is a hybrid and linear microwave quantum network. We show that the coherent interaction can be sustained over distances of a few mm up to several cm. Similar to classical linear MW circuits, the coherent quantum exchange of photons is ruled by the impedances of the electron and the cavity. As one concrete application, we discuss the entanglement of the cyclotron motions of two electrons located in two separate traps.

Dissipative bosonic squeezing via frequency modulation and its application in optomechanics.

The dissipative squeezing mechanism is an effective method to generate the strong squeezing, which is important in the precision metrology. Here, we propose a practical method to achieve arbitrary bosonic squeezing via introducing frequency modulation into the coupled harmonic resonator model. We analyze the effect of frequency modulation and give the analytical and numerical squeezing results, respectively. To measure the accurate dynamic squeezing in our proposal, we give a more general defination of the relative squeezing degree. Finally, the proposed method is extended to generate the strong mechanical squeezing (>3 dB) in a practical optomechanical system consisting of a graphene mechanical oscillator coupled to a superconducting microwave cavity. The result indicates that the strong mechanical squeezing can be effectively achieved even when the mechanical oscillator is not initially in its ground state. The proposed method expands the study on nonclassical state and does not need the bichromatic microwave driving technology.

Current Detection Using a Josephson Parametric Upconverter

We present the design, measurement and analysis of a current sensor based on a process of Josephson parametric upconversion in a superconducting microwave cavity. Terminating a coplanar waveguide with a nanobridge constriction Josephson junction, we observe modulation sidebands from the cavity that enable highly sensitive, frequency-multiplexed output of small currents for applications such as transition-edge sensor array readout. We derive an analytical model to reproduce the measurements over a wide range of bias currents, detunings and input powers. Tuning the frequency of the cavity by more than \SI{100}{\mega\hertz} with DC current, our device achieves a minimum current sensitivity of \SI{8.9}{\pico\ampere\per\sqrt{\hertz}}. Extrapolating the results of our analytical model, we predict an improved device based on our platform, capable of achieving sensitivities down to \SI{50}{\femto\ampere\per\sqrt{\hertz}}}, or even lower if one could take advantage of parametric amplification in the Josephson cavity. Taking advantage of the Josephson architecture, our approach can provide higher sensitivity than kinetic inductance designs, and potentially enables detection of currents ultimately limited by quantum noise.

Quantum error correction of a qubit encoded in grid states of an oscillator.

The accuracy of logical operations on quantum bits (qubits) must be improved for quantum computers to outperform classical ones in useful tasks. One method to achieve this is quantum error correction (QEC), which prevents noise in the underlying system from causing logical errors.This approach derives from the reasonable assumption that noise is local, that is, it does not act in a coordinated way on different parts of the physical system. Therefore, if a logical qubit is encoded non-locally, we can-for a limited time-detect and correct noise-induced evolution before it corrupts the encoded information1. In 2001, Gottesman, Kitaev and Preskill (GKP) proposed a hardware-efficient instance of such a non-local qubit: a superposition of position eigenstatesthat forms grid states of a single oscillator2. However, the implementation of measurements that reveal this noise-induced evolution of the oscillator while preserving the encoded information3-7 has proved to be experimentally challenging, and the only realization reported so far relied on post-selection8,9, which is incompatible with QEC. Here we experimentally prepare square and hexagonal GKP code states through a feedback protocol that incorporates non-destructive measurements that are implemented with a superconducting microwave cavity having the role of the oscillator. We demonstrate QEC of an encoded qubit with suppression of all logical errors, in quantitative agreement with a theoretical estimate based on the measured imperfections of the experiment. Our protocol is applicable to other continuous-variable systems and, in contrast to previous implementations of QEC10-14, can mitigate all logical errors generated by a wide variety of noise processes and facilitate fault-tolerant quantum computation.

Cooling a Mechanical Oscillator in Opto-electro-mechanical System with Frequency Modulations

The opto-electro-mechanical system as a quantum interface between electronic information and optical information plays an important role in quantum information processing. Ground-state cooling of the macroscopic mechanical oscillator is a crucial requirement for this system in order to eliminate the effect of thermal fluctuations on transmission of information. Here, we propose a scheme of ground-state cooling for a mechanical oscillator which is coupled to an optical cavity through radiation pressure force and simultaneously coupled to a superconducting microwave cavity through an effective capacitance. Meanwhile, the periodical frequency modulations are applied to the optical mode, microwave cavity, and mechanical mode, respectively. The cooling efficiency is analyzed and cooling dynamics is simulated numerically by means of covariance matrix. The results show that the Stokes heating processes can be suppressed effectively by means of frequency modulations, and the mechanical oscillator can be cooled to near its ground-state with a higher efficiency than that of a standard optomechanical system due to the double cooling channel. Moreover, a complementary cooling effect is found between these two cooling channels, i.e., a high cooling efficiency can be achieved by cooperation between a good optical cavity and a bad microwave cavity, or vice versa. This cooperative cooling of the double channel breaks the limitation of resolved-sideband regime.

High coherence superconducting microwave cavities with indium bump bonding

Low-loss cavities are important in building high-coherence superconducting quantum computers. Generating high-quality joints between parts is crucial for the realization of a scalable quantum computer using the circuit quantum electrodynamics (cQED) framework. In this paper, we adapt the technique of indium bump bonding to cQED to realize high-quality superconducting microwave joints between chips. We use this technique to fabricate compact superconducting cavities in the multilayer microwave integrated quantum circuit (MMIQC) architecture and achieve single photon quality factors over 300 × 106 or single-photon lifetimes approaching 5 ms. To quantify the performance of the resulting seam, we fabricate microwave stripline resonators in multiple sections connected by different numbers of bonds, resulting in a wide range of seam admittances. The measured quality factors combined with the designed seam admittances allow us to bound the conductance of the seam at gseam≥2×1010/(Ω m). Such a conductance should enable the construction of micromachined superconducting cavities with a quality factor of at least a billion. These results demonstrate the capability to construct very high-quality microwave structures within the MMIQC architecture.

Single-Shot Nondestructive Detection of Rydberg-Atom Ensembles by Transmission Measurement of a Microwave Cavity.

We present an experimental realization of single-shot nondestructive detection of ensembles of helium Rydberg atoms. We use the dispersive frequency shift of a superconducting microwave cavity interacting with the ensemble. By probing the transmission of the cavity, we determine the number of Rydberg atoms or the populations of Rydberg quantum states when the ensemble is prepared in a superposition. At the optimal microwave probe power, determined by the critical photon number, we reach single-shot detection of the atom number with 13% relative precision for ensembles of about 500Rydberg atoms with a measurement backaction characterized by approximately 2% population transfer.

Partial Time-Reversal Invariance Violation in a Flat, Superconducting Microwave Cavity with the Shape of a Chaotic Africa Billiard.

We report on the experimental realization of a flat, superconducting microwave resonator, a microwave billiard, with partially violated time-reversal (T) invariance, induced by inserting a ferrite into the cavity and magnetizing it with an external magnetic field perpendicular to the resonator plane. In order to prevent its expulsion caused by the Meissner-Ochsenfeld effect, we used a cavity of which the top and bottom plate were made from niobium, a superconductor of type II, and cooled it down to liquid-helium temperature T_{LHe}≃4 K. The cavity had the shape of a chaotic Africa billiard. Superconductivity rendered possible the accurate determination of complete sequences of the resonance frequencies and of the widths and strengths of the resonances, an indispensable prerequisite for the unambiguous detection of T invariance violation, especially when it is only partially violated. This allows for the first time the precise specification of the size of T invariance violation from the fluctuation properties of the resonance frequencies and from the strength distribution, which actually depends sensitively on it and thus provides a most suitable measure. For this purpose we derived an analytical expression for the latter which is valid for isolated resonances in the range from no T invariance violation to complete violation.

Electro-optomechanical cooperative cooling of nanomechanical oscillator beyond resolved sideband regime

We propose a ground-state cooling scheme for a nanomechanical oscillator (NMO) that interacts with an optical cavity via radiation pressure at one side and with a superconducting microwave cavity via a capacitor at the other side. By driving these two cavities on their respective red sidebands with extra laser and microwave fields, the NMOs dual cooling channel is created through electro-optomechanical cooperation. Differing from the conventional optomechanical system with a single optical cavity wherein ground-state cooling is limited in the resolved sideband, the proposed scheme allows the optical cavity to function in an unresolved sideband regime under the cooperation of a microwave cavity with a high quality factor, or vice versa. In a weak coupling regime we demonstrate that the NMO can be cooled to near its ground-state from a finite temperature with a cooling rate that is significantly faster than that of the single-cavity optomechanical system. The heating process can be completely suppressed by the cooperation of the dual cooling channel by appropriately selecting the systems parameters. With a decreasing thermal phonon number, the numerical results of final mechanical occupancy gradually approach the analytical cooling limit.

Quantum Rabi Oscillations in Coherent and in Mesoscopic Cat Field States.

The simple resonant Rabi oscillation of a two-level system in a single-mode coherent field reveals complex features at the mesoscopic scale, with oscillation collapses and revivals. Using slow circular Rydberg atoms interacting with a superconducting microwave cavity, we explore this phenomenon in an unprecedented range of interaction times and photon numbers. We demonstrate the efficient production of cat states, which are the quantum superposition of coherent components with nearly opposite phases and sizes in the range of few tens of photons. We measure cuts of their Wigner functions revealing their quantum coherence and observe their fast decoherence. This experiment opens promising perspectives for the rapid generation and manipulation of nonclassical states in cavity and circuit quantum electrodynamics.

Entanglement of bosonic modes through an engineered exchange interaction.

Quantum computation presents a powerful new paradigm for information processing. A robust universal quantum computer can be realized with any well controlled quantum system, but a successful platform will ultimately require the combination of highly coherent, error-correctable quantum elements with at least one entangling operation between them1,2. Quantum information stored in a continuous-variable system-for example, a harmonic oscillator-can take advantage of hardware-efficient quantum error correction protocols that encode information in the large available Hilbert space of each element3-5. However, such encoded states typically have no controllable direct couplings, making deterministic entangling operations between them particularly challenging. Here we develop an efficient implementation of the exponential-SWAP operation6 and present its experimental realization between bosonic qubits stored in two superconducting microwave cavities. This engineered operation is analogous to the exchange interaction between discrete spin systems, but acts within any encoded subspace of the continuous-variable modes. Based on a control rotation, the operation produces a coherent superposition of identity and SWAP operations between arbitrary states of two harmonic oscillator modes and can be used to enact a deterministic entangling gate within quantum error correction codes. These results provide a valuable building block for universal quantum computation using bosonic modes.

Engineering bilinear mode coupling in circuit QED: Theory and experiment

Photonic states of superconducting microwave cavities controlled by transmon ancillas provide a platform for encoding and manipulating quantum information. A key challenge in scaling up the platform is the requirement to communicate on demand the information between the cavities. It has been recently demonstrated that a tunable bilinear interaction between two cavities can be realized by coupling them to a bichromatically-driven transmon ancilla, which allows swapping and interfering the multi-photon states of the cavities [Gao et al., Phys. Rev. X 8, 021073(2018)]. Here, we explore both theoretically and experimentally the regime of relatively strong drives on the ancilla needed to achieve fast SWAP gates but which can also lead to undesired non-perturbative effects that lower the SWAP fidelity. We develop a theoretical formalism based on linear response theory that allows one to calculate the rate of ancilla-induced interaction, decay and frequency shift of the cavities in terms of a susceptibility matrix. We treat the drives non-perturbatively using Floquet theory, and find that the interference of the two drives can strongly alter the system dynamics even in the regime where the rotating wave approximation applies. We identify two major sources of infidelity due to ancilla decoherence. i) Ancilla dissipation and dephasing leads to incoherent hopping among Floquet states which occurs even when the ancilla is at zero temperature, resulting in a sudden change of the SWAP rate. ii) The cavities inherit finite decay from the relatively lossy ancilla through the inverse Purcell effect; the effect can be enhanced when the drive-induced AC Stark shift pushes certain ancilla transition frequencies to the vicinity of the cavity frequencies. The theoretical predictions agree quantitatively with the experimental results, paving the way for using the theory to design future experiments.

Cryogenic microwave filter cavity with a tunability greater than 5 GHz.

A wide variety of applications of microwave cavities, such as measurement and control of superconducting qubits, magnonic resonators, and phase noise filters, would be well served by having a highly tunable microwave resonance. Often this tunability is desired in situ at low temperatures, where one can take advantage of superconducting cavities. To date, such cryogenic tuning while maintaining a high quality factor has been limited to ∼500 MHz. Here we demonstrate a three-dimensional superconducting microwave cavity that shares one wall with a pressurized volume of helium. Upon pressurization of the helium chamber, the microwave cavity is deformed, which results in in situ tuning of its resonant frequency by more than 5 GHz, greater than 60% of the original 8 GHz resonant frequency. The quality factor of the cavity remains approximately constant at ≈7 × 103 over the entire range of tuning. As a demonstration of its usefulness, we implement a tunable cryogenic phase noise filter, which reduces the phase noise of our source by approximately 10 dB above 400 kHz.