Sum Frequency Generation Vibrational Spectroscopy Research Articles

Size- and Shape-Dependent Interactions of Lipid-Coated Silver Nanoparticles: An Improved Mechanistic Understanding through Model Cell Membranes and In Vivo Toxicity.

The widespread use of silver nanoparticles (AgNPs) in various applications and industries has brought to light the need for understanding the complex relationship between the physicochemical properties (shape, size, charge, and surface chemistry) of AgNPs that affect their ability to enter cells and cause toxicity. To evaluate their toxicological outcomes, this study systematically analyzed a series of homogeneous hybrid lipid-coated AgNPs spanning sizes from 5 to 100 nm with diverse shapes (spheres, triangles, and cubes). The hybrid lipid membrane comprises hydrogenated phosphatidylcholine (HPC), sodium oleate (SOA), and hexanethiol (HT), which shield the AgNP surface from surface oxidation and toxic Ag+ ion release to minimize its contribution to toxicity. To reduce any significant effects by surface chemistry, the HPC, SOA, and HT membrane composition ratio was kept constant, and the AgNPs were assessed using embryonic zebrafish (Danio rerio). While a direct comparison cannot be drawn due to the lack of complementary sizes below 40 nm for triangular plates and cubes due to synthetic challenges, significant mortality was observed for spherical AgNPs (AgNSs) of 5, 20, 40, and 60 nm at 120 h postfertilization at concentrations ≥6 mg Ag/L. In contrast, the 10, 80, and 100 nm AgNSs, 40, 70, and 100 nm triangular plate AgNPs (AgNPLs), and 55, 75, and 100 nm cubic AgNPs (AgNCs) showed no significant mortality at 5 days postfertilization following exposure to AgNPs at concentrations up to 12 mg Ag/L. With constant surface chemistry on the AgNPs, size is the dominant factor driving toxicological responses, with smaller nanoparticles (5 to 60 nm) being the most toxic. Larger AgNSs, AgNCs, and AgNPLs from 75 to 100 nm do not show any evidence of toxicity. However, when closely examining sizes between 40 and 60 nm for AgNSs, AgNCs, and AgNPLs, there is evidence that discriminates shape as a driver of toxicity since sublethal responses generally were observed to follow a pattern, suggesting toxicity is most significant for AgNSs followed by AgNPLs and then AgNCs, which is the least toxic. Sum frequency generation vibrational spectroscopy showed that irrespective of size or shape, all hybrid lipid-coated AgNPs interact with membrane surfaces and "snorkel" between phases into the lipid monolayer with minimal energetic cost. These findings decisively demonstrate that not only smaller AgNPs but also the shape of the AgNPs influences their biological compatibility.

Probing the Local Near-Field Intensity of Plasmonic Nanoparticles in the Mid-infrared Spectral Region.

The enhanced local field of gold nanoparticles (AuNPs) in mid-infrared spectral regions is essential for improving the detection sensitivity of vibrational spectroscopy and mediating photochemical reactions. However, it is still challenging to measure its intensity at subnanometer scales. Here, using the NO2 symmetric stretching mode (νNO2) of self-assembled 4-nitrothiophenol (4-NTP) monolayers on AuNPs as a model, we demonstrated that the percentage of excited νNO2 mode, determined by femtosecond time-resolved sum-frequency generation vibrational spectroscopy, allows us to directly detect the local field intensity of the AuNP surface in subnanometer ranges. The local-field intensity is tuned by AuNP diameters. An approximate 17-fold enhancement was observed for the local field on 80 nm AuNPs compared to the Au film. Additionally, the local field can regulate the anharmonicity of the νNO2 mode by synergistic effect with molecular orientation. This work offers a promising approach to probe the local field intensity distribution around plasmonic NP surfaces at subnanometer scales.

Activation Energy of Ion Desorption at Ionic Liquid/Pt Electrode Interfaces: A Sum-Frequency Generation Vibrational Spectroscopic Study.

Electrolyte/electrode interfaces of room-temperature ionic liquids (RTILs) exhibit hysteretic responses to different applied potentials owing to the differences in the ion adsorption/desorption processes; the ion desorption requires excess potential, which reflects the activation energy of ion desorption. Thus far, the contributions of the ion adsorption energy and the activation barrier for ion desorption toward the ion-dependent excess potential have not been quantified. Herein, we report on our infrared-visible sum-frequency generation vibrational spectroscopy study of the hysteretic responses of the anion adsorption/desorption at Pt electrode interfaces using neat, binary, and diluted RTILs composed of 1-butyl-3-methylimidazolium cations ([C4mim]+) and bis(trifluoromethanesulfonyl)amide ([TFSA]-) and trifluoromethanesulfonate ([OTf]-) anions. Experimental results are compared to the theoretical calculations for the electric double layer model. The hysteretic response of the RTIL/Pt interface derives predominantly from the activation energy of anion desorption, which causes the negative excess potential required for anion desorption. A comparison of the anion adsorption/desorption behaviors of neat RTILs with those of binary and diluted RTILs reveals that the large activation energy of anion desorption at the neat RTIL/Pt interface originates largely from the activation barrier for restructuring ionic layering in the diffuse layer.

Interfacial molecular structure and orientation evolution of the polystyrene under confinement during annealing revealed by sum frequency generation vibrational spectroscopy

The geometrical confinement directly affects many crucial properties of polymer thin films by interfacial interactions. A key to understanding the role of these interfacial interactions is to specifically probe the confined interface at the molecular level and in situ. However, the direct and nondestructive detection of interfacial polymer structures under confinement is very difficult. In this study, specific interface-sensitive sum frequency generation (SFG) spectroscopy was applied to study the deuterated PS (d8-PS) film confined between hydrogenated poly (methyl methacrylate) (PMMA) films at the molecular level and in situ. The results showed that the ordering/orientation of the PS chain (backbone and phenyl group) evolved at the buried d8-PS/PMMA interface during annealing. The tilt angle of the PS phenyl group increased while the twist angle decreased with elevated annealing temperature. Both overall SFG ssp and ppp intensities decreased after annealing at 433 K for 24 h, indicating that PS chains entangled with or penetrated the PMMA chains at the confined interface. This study qualitatively and quantitatively revealed the interfacial structure and structural evolution of the PS chain confined between PMMA films in situ during annealing, which is beneficial to the molecular-level understanding of the interfacial chain conformational relaxation of polymers under confinement.

Physicochemical control of solvation and molecular assembly of charged amphiphilic oligomers at air-aqueous interfaces

Hypothesis: Understanding the rules that control the assembly of nanostructured soft materials at interfaces is central to many applications. We hypothesize that electrolytes can be used to alter the hydration shell of amphiphilic oligomers at the air-aqueous interface of Langmuir films, thereby providing a means to control the formation of emergent nanostructures.Experiments: Three representative salts – (NaF, NaCl, NaSCN) were studied for mediating the self-assembly of oligodimethylsiloxane methylimidazolium (ODMS-MIM+) amphiphiles in Langmuir films. The effects of the different salts on the nanostructure assembly of these films were probed using vibrational sum frequency generation (SFG) spectroscopy and Langmuir trough techniques. Experimental data were supported by atomistic molecular dynamic simulations.Findings: Langmuir trough surface pressure – area isotherms suggested a surprising effect on oligomer assembly, whereby the presence of anions affects the stability of the interfacial layer irrespective of their surface propensities. In contrast, SFG results implied a strong anion effect that parallels the surface activity of anions. These seemingly contradictory trends are explained by anion driven tail dehydration resulting in increasingly heterogeneous systems with entangled ODMS tails and appreciable anion penetration into the complex interfacial layer comprised of headgroups, tails, and interfacial water molecules. These findings provide physical and chemical insight for tuning a wide range of interfacial assemblies.

Cholesterol Changes Interfacial Water Alignment in Model Cell Membranes.

The nanoscopic layer of water that directly hydrates biological membranes plays a critical role in maintaining the cell structure, regulating biochemical processes, and managing intermolecular interactions at the membrane interface. Therefore, comprehending the membrane structure, including its hydration, is essential for understanding the chemistry of life. While cholesterol is a fundamental lipid molecule in mammalian cells, influencing both the structure and dynamics of cell membranes, its impact on the structure of interfacial water has remained unknown. We used surface-specific vibrational sum-frequency generation spectroscopy to study the effect of cholesterol on the structure and hydration of monolayers of the lipids 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC), 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC), and egg sphingomyelin (SM). We found that for the unsaturated lipid DOPC, cholesterol intercalates in the membrane without significantly changing the orientation of the lipid tails and the orientation of the water molecules hydrating the headgroups of DOPC. In contrast, for the saturated lipids DPPC and SM, the addition of cholesterol leads to clearly enhanced packing and ordering of the hydrophobic tails. It is also observed that the orientation of the water hydrating the lipid headgroups is enhanced upon the addition of cholesterol. These results are important because the orientation of interfacial water molecules influences the cell membranes' dipole potential and the strength and specificity of interactions between cell membranes and peripheral proteins and other biomolecules. The lipid nature-dependent role of cholesterol in altering the arrangement of interfacial water molecules offers a fresh perspective on domain-selective cellular processes, such as protein binding.

Characterization of Buried Interfaces of Silicone Materials in Situ to Understand Their Fouling-Release, Antifouling, and Adhesion Properties.

Poly(dimethylsiloxane) (PDMS) has numerous excellent properties and is extensively used as the main component of many silicone products in a variety of research fields and practical applications such as biomedical materials, aviation, construction, electronic devices, and automobiles. Interfacial structures of PDMS and other components in silicone systems are important for such research and applications. It is difficult to probe interfacial molecular structures of buried solid-liquid and solid-solid interfaces of silicone materials due to the lack of appropriate analytical tools. In this feature article, we presented our research on elucidating the molecular structures of PDMS as well as other additives in silicone samples at buried interfaces in situ at the molecular level using a nonlinear optical spectroscopic technique, sum frequency generation (SFG) vibrational spectroscopy. SFG was applied to study various PDMS surfaces in liquid environments to understand their fouling-release and antifouling activities. SFG has also been used to study buried solid-solid interfaces between silicone adhesives and polymers, elucidating the molecular adhesion mechanisms. Our SFG studies provide important knowledge on interfacial structure-function relationships of silicone materials, helping the design and development of silicone materials with improved properties through optimization of silicone interfacial structures.

Protein-Mediated Changes in Membrane Fluidity and Ordering: Insights into the Molecular Mechanism and Implications for Cellular Function.

Probing protein-membrane interactions is vital for understanding biological functionality for various applications such as drug development, targeted drug delivery, and creation of functional biomaterials for medical and industrial purposes. In this study, we have investigated interaction of Human Serum Albumin (HSA) with two different lipids, dipalmitoylphosphatidylglycerol (dDPPG) and dipalmitoylphosphatidylcholine (dDPPC), using Vibrational Sum Frequency Generation spectroscopy at different membrane fluidity values. In the liquid-expanded (LE) state of the lipid, HSA (at pH 3.5) deeply intercalated lipid chains through a combination of electrostatic and hydrophobic interactions, which resulted in more ordering of the lipid chains. However, in the liquid-condensed (LC) state, protein intercalation is decreased due to tighter lipid packing. Moreover, our findings revealed distinct differences in HSA's interaction with dDPPG and dDPPC lipids. The interaction with dDPPC remained relatively weak compared to dDPPG. These results shed light on the significance of protein mediated changes in lipid characteristics, which hold considerable implications for understanding membrane protein behavior, lipid-mediated cellular processes, and lipid-based biomaterial design.

Probing Interfacial Aging of Model Adhesion Joints under a Hygrothermal Environment at a Molecular Level.

Generally, for adhesive joints, the polar water molecules in humid environments can have a critical effect on the interfacial structures and structural evolution adjacent to the solid substrates. Regarding this, it is still a big challenge to detect and understand the interfacial hygrothermal aging process at the molecular level in real time and in situ. In this study, to trace the interfacial hygrothermal aging process of a classical epoxy formula containing diglycidyl ether of biphenyl A (DGEBA) and 2,2'-(ethylenedioxy) diethylamine (EDDA) with sapphire and fused silica in a typical hygrothermal environment (85 °C and 85% RH), sum frequency generation (SFG) vibrational spectroscopy was used to probe the molecular-level interfacial structural change over the time. The structural evolution dynamics at the buried epoxy/sapphire and epoxy/silica interfaces upon hygrothermal aging were revealed directly in situ. The interfacial delamination during hygrothermal aging was also elucidated from the molecular level. Upon hygrothermal aging, the interfacial CH signals, such as the ones from methyl, methylene, and phenyl groups, decreased significantly and the water OH signals increased substantially, indicating the water molecules had diffused into the interfaces and destroyed the original interactions between the epoxy formula and the substrates. Further analysis indicates that when the integrated signals in the CH range declined to their minimum and leveled off, the interfacial delamination happened. The tensile experiment proved the validity of these spectroscopic experimental results. Our study provides first-hand and molecular-level evidence on a direct correlation between the diffusion of the surrounding water molecules into the interface and the evolution/destruction of the interfacial structures during hygrothermal aging. More importantly, it is proved, SFG can be developed into a powerful tool to noninvasively reveal the local interfacial delamination in real time and in situ under extreme hygrothermal conditions, complemented by the mechanic test.

Charge Transfer Dynamics in Organic-Inorganic Hybrid Heterostructures-Insights by Vibrational-Sum Frequency Generation Spectroscopy.

Organic-inorganic heterostructures play a pivotal role in modern electronic and optoelectronic applications including photodetectors and field effect transistors, as well as in solar energy conversion such as photoelectrodes of dye-sensitized solar cells, photoelectrochemical cells, and in organic photovoltaics. To a large extent, performance of such devices is controlled by charge transfer dynamics at and across (inner) interfaces, e.g., between a wide band gap semiconductor and molecular sensitizers and/or catalysts. Hence, a detailed understanding of the structure-dynamics-function relationship of such functional interfaces is necessary to rationalize possible performance limitations of these materials and devices on a molecular level. Vibrational sum-frequency generation (VSFG) spectroscopy, as an interface-sensitive spectroscopic technique, allows to obtain chemically specific information from interfaces and combines such chemical insights with ultrafast time resolution, when integrated as a spectroscopic probe into a pump-probe scheme. Thus, this minireview discusses the advantages and potential of VSFG spectroscopy for investigating interfacial charge transfer dynamics and structural changes at inner interfaces. A critical perspective of the unique spectroscopic view of otherwise inaccessible interfaces is presented, which we hope opens new opportunities for an improved understanding of function-determining processes in complex materials, and brings together communities who are devoted to designing materials and devices with spectroscopists.

Ladungstransferdynamiken in organisch–anorganischen hybriden Heterostrukturen – Einblicke mithilfe von Summenfrequenzspektroskopie

AbstractOrganisch–anorganische Heterostrukturen spielen eine zentrale Rolle in modernen elektronischen und optoelektronischen Anwendungen. Dazu gehören Photodetektoren und Feldeffekttransistoren sowie die Umwandlung von Solarenergie mithilfe von Photoelektroden für Farbstoffsolarzellen, photoelektrochemischen Zellen und organischen Photovoltaiksystemen. Die Leistung solcher Systeme wird zu großen Teilen durch die Dynamik des Ladungstransfers an und zwischen (inneren) Grenzflächen, z. B. zwischen einem Halbleiter mit großer Bandlücke und molekularen Sensibilisatoren und/oder Katalysatoren, bestimmt. Daher ist ein detailliertes Verständnis der Beziehung zwischen Struktur, Dynamik und Funktion solcher funktionalen Grenzflächen notwendig, um mögliche Limitationen der Leistungsfähigkeit dieser Materialien und Systeme auf molekularer Ebene zu erklären. Die Summenfrequenzspektroskopie (SFS) als grenzflächenempfindliche Technik ermöglicht es, spezifische chemische Informationen über Grenzflächen zu erhalten. Wird diese in ein Anregungs‐Abfrage‐Schema integriert, liefert sie neben solchen chemischen Erkenntnissen eine ultraschnelle Zeitauflösung. Dieser Mini‐Review‐Artikel diskutiert die Vorteile und das Potenzial der SFS für die Untersuchung von Ladungstransferdynamiken an Grenzflächen und von strukturellen Veränderungen an inneren Grenzflächen. Es wird ein wichtiger Beitrag dieser einzigartigen spektroskopischen Einblicke in ansonsten unzugängliche Grenzflächen vorgestellt, der, so hoffen wir, neue Wege für ein besseres Verständnis der funktionsbestimmenden Prozesse in komplexen Materialien aufzeigt. Damit sollen Gemeinschaften, die sich dem Design von Materialien und Bauteilen widmen, mit Spektroskopikern zusammengebracht werden.

Working on a dream: bringing up the level of interface spectroscopy to the bulk level

Abstract Liquid interfaces are unique environments in which a variety of fundamental phenomena occur. Therefore, it is important to obtain a molecular-level understanding of liquid interfaces for both basic science and industrial applications. However, it is not an easy task to investigate molecules in the interface region that only has nanometer thicknesses. Second-order nonlinear spectroscopy, or even-order nonlinear spectroscopy more generally, is intrinsically interface-selective because the relevant nonlinear signal is generated only in the region in which the inversion symmetry is broken under the dipole approximation. In the past 2 decades, we have been developing and applying new interface nonlinear spectroscopic methods, aiming to bring up the level of knowledge on interfacial molecules to that on molecules in solution. During this attempt, we developed electronic sum-frequency generation spectroscopy, heterodyne-detected electronic sum-frequency generation spectroscopy, and heterodyne-detected vibrational sum-frequency generation spectroscopy, as well as fourth-order Raman spectroscopy. We also extended the methods to femtosecond time-resolved measurements. Using these methods, we are now able to study the structure and dynamics at liquid interfaces, in particular exposed interfaces such as air/liquid interfaces, at a similar level to the study for solution. I overview our interface research while describing thoughts we had at each turning point.

Intermolecular Protein-Water Coupling Impedes the Coupling Between the Amide A and Amide I Mode in Interfacial Proteins.

The coupling between different vibrational modes in proteins is essential for chemical dynamics and biological functions and is linked to the propagation of conformational changes and pathways of allosteric communication. However, little is known about the influence of intermolecular protein-H2O coupling on the vibrational coupling between amide A (NH) and amide I (C═O) bands. Here, we investigate the NH/CO coupling strength in various peptides with different secondary structures at the lipid cell membrane/H2O interface using femtosecond time-resolved sum frequency generation vibrational spectroscopy (SFG-VS) in which a femtosecond infrared pump is used to excite the amide A band, and SFG-VS is used to probe transient spectral evolution in the amide A and amide I bands. Our results reveal that the NH/CO coupling strength strongly depends on the bandwidth of the amide I mode and the coupling of proteins with water molecules. A large extent of protein-water coupling significantly reduces the delocalization of the amide I mode along the peptide chain and impedes the NH/CO coupling strength. A large NH/CO coupling strength is found to show a strong correlation with the high energy transfer rate found in the light-harvesting proteins of green sulfur bacteria, which may understand the mechanism of energy transfer through a molecular system and assist in controlling vibrational energy transfer by engineering the molecular structures to achieve high energy transfer efficiency.

Water-Mediated Charge Transfer and Electron Localization in a Co3Fe2 Cyanide-Bridged Trigonal Bipyramidal Complex.

The effects of temperature and chemical environment on a pentanuclear cyanide-bridged, trigonal bipyramidal molecular paramagnet have been investigated. Using element- and oxidation state-specific near-ambient pressure X-ray photoemission spectroscopy (NAP-XPS) to probe charge transfer and second order, nonlinear vibrational spectroscopy, which is sensitive to symmetry changes based on charge (de)localization coupled with DFT, a detailed picture of environmental effects on charge-transfer-induced spin transitions is presented. The molecular cluster, Co3Fe2(tmphen)6(μ-CN)6(t-CN)6, abbrev. Co3Fe2, shows changes in electronic behavior depending on the chemical environment. NAP-XPS shows that temperature changes induce a metal-to-metal charge transfer (MMCT) in Co3Fe2 between a Co and Fe center, while cycling between ultrahigh vacuum and 2 mbar of water at constant temperature causes oxidation state changes not fully captured by the MMCT picture. Sum frequency generation vibrational spectroscopy (SFG-VS) probes the role of the cyanide ligand, which controls the electron (de)localization via the superexchange coupling. Spectral shifts and intensity changes indicate a change from a charge delocalized, Robin-Day class II/III high spin state to a charge-localized, class I low spin state consistent with DFT. In the presence of a H-bonding solvent, the complex adopts a localized electronic structure, while removal of the solvent delocalizes the charges and drives an MMCT. This change in Robin-Day classification of the complex as a function of chemical environment results in reversible switching of the dipole moment, analogous to molecular multiferroics. These results illustrate the important role of the chemical environment and solvation on underlying charge and spin transitions in this and related complexes.

Heterodyne-Detected Sum-Frequency Generation Vibrational Spectroscopy Reveals Aqueous Molecular Structure at the Suspended Graphene/Water Interface.

Graphene, a transparent two-dimensional conductive material, has brought extensive new perspectives and prospects to various aqueous technological systems, such as desalination membranes, chemical sensors, energy storage, and energy conversion devices. Yet, the molecular-level details of graphene in contact with aqueous electrolytes, such as water orientation and hydrogen bond structure, remain elusive or controversial. Here, we employ surface-specific heterodyne-detection sum-frequency generation (HD-SFG) vibrational spectroscopy to re-examine the water molecular structure at a freely suspended graphene/water interface. We compare the response from the air/graphene/water system to that from the air/water interface. Our results indicate that theχ(2)yyz spectrum recorded from the air/graphene/water system arises from the topmost 1-2 water layers in contact with the graphene, with the graphene itself not generating a significant SFG response. Compared to the air/water interface response, the presence of monolayer graphene weakly affects the interfacial water. Graphene weakly affects the dangling O-H group, lowering its frequency through its interaction with the graphene sheet, and has a small effect on the hydrogen-bonded O-H group. Molecular dynamics simulations confirm our experimental observation. Our work provides molecular insight into the interfacial structure at a suspended graphene/water interface, relevant to various technological applications of graphene.

Probing the Molecular Structure and Dynamics of Membrane-Bound Proteins during Misfolding Processes by Sum-Frequency Generation Vibrational Spectroscopy.

Protein misfolding and amyloid formation are implicated in the protein dysfunction, but the underlying mechanism remains to be clarified due to the lack of effective tools for detecting the transient intermediates. Sum frequency generation vibrational spectroscopy (SFG-VS) has emerged as a powerful tool for identifying the structure and dynamics of proteins at the interfaces. In this review, we summarize recent SFG-VS studies on the structure and dynamics of membrane-bound proteins during misfolding processes. This paper first introduces the methods for determining the secondary structure of interfacial proteins: combining chiral and achiral spectra of amide A and amide I bands and combining amide I, amide II, and amide III spectral features. To demonstrate the ability of SFG-VS in investigating the interfacial protein misfolding and amyloid formation, studies on the interactions between different peptides/proteins (islet amyloid polypeptide, amyloid β, prion protein, fused in sarcoma protein, hen egg-white lysozyme, fusing fusion peptide, class I hydrophobin SC3 and class II hydrophobin HFBI) and surfaces such as lipid membranes are discussed. These molecular-level studies revealed that SFG-VS can provide a unique understanding of the mechanism of interfacial protein misfolding and amyloid formation in real time, in situ and without any exogenous labeling.

Elucidating the Changes in Molecular Structure at the Buried Interface of RTV Silicone Elastomers during Curing.

Silicone elastomers are widely used in many industrial applications, including coatings, adhesives, and sealants. Room-temperature vulcanized (RTV) silicone, a major subcategory of silicone elastomers, undergoes molecular structural transformations during condensation curing, which affect their mechanical, thermal, and chemical properties. The role of reactive hydroxyl (-OH) groups in the curing reaction of RTV silicone is crucial but not well understood, particularly when multiple sources of hydroxyl groups are present in a formulated product. This work aims to elucidate the interfacial molecular structural changes and origins of interfacial reactive hydroxyl groups in RTV silicone during curing, focusing on the methoxy groups at interfaces and their relationship to adhesion. Sum frequency generation (SFG) vibrational spectroscopy is an in situ nondestructive technique used in this study to investigate the interfacial molecular structure of select RTV formulations at the buried interface at different levels of cure. The primary sources of hydroxyl groups required for interfacial reactions in the initial curing stage are found to be those on the substrate surface rather than those from the ingress of ambient moisture. The silylation treatment of silica substrates eliminates interfacial hydroxyl groups, which greatly impact the silicone interfacial behavior and properties (e.g., adhesion). This study establishes the correlation between interfacial molecular structural changes in RTV silicones and their effect on adhesion strength. It also highlights the power of SFG spectroscopy as a unique tool for studying chemical and structural changes at RTV silicone/substrate interface in situ and in real time during curing. This work provides valuable insights into the interfacial chemistry of RTV silicone and its implications for material performance and application development, aiding in the development of improved silicone adhesives.

Potential Dependent Reorientation Controlling Activity of a Molecular Electrocatalyst.

The activity of molecular electrocatalysts depends on the interplay of electrolyte composition near the electrode surface, the composition and morphology of the electrode surface, and the electric field at the electrode-electrolyte interface. This interplay is challenging to study and often overlooked when assessing molecular catalyst activity. Here, we use surface specific vibrational sum frequency generation (VSFG) spectroscopy to study the solvent and potential dependent activation of Mo(bpy)(CO)4, a CO2 reduction catalyst, at a polycrystalline Au electrode. We find that the parent complex undergoes potential dependent reorientation at the electrode surface when a small amount of N-methyl-2-pyrrolidone (NMP) is present. This preactivates the complex, resulting in greater yields at less negative potentials, of the active electrocatalyst for CO2 reduction.

Water structure at coal/water interface: Insights from SFG vibrational spectroscopy and MD simulation

The coal/water interface plays a significant role in coal processing and utilization, and hydrogen bonds (HBs) are the primary factors affecting the interfacial water structure. Sum frequency generation (SFG) vibrational spectroscopy was used in this study to analyze HBs at the coal/water interface, and molecular dynamics (MD) simulations were conducted to investigate the molecular dynamics properties of interfacial water. The results showed that water molecules formed strong HBs with the lignite surface using both oxygen and hydrogen atoms, whereas HBs at bituminous coal/water and anthracite/water interfaces mainly occurred through the hydrogen atoms of water molecules. Fewer HBs existed at the bituminous coal/water interface, resulting in more free hydroxyl groups of water molecules. HBs at the anthracite/water interface were weaker than those at the lignite/water interface but stronger than those at the bituminous coal/water interface. Stronger HBs facilitated the adsorption of water molecules onto coal surfaces, reducing the number density and diffusion coefficient of water molecules within the water layer. For both properties, the MD simulation results showed the following order of decreasing magnitude: bituminous coal/water interface > anthracite/water interface > lignite/water interface. The combination of SFG vibrational spectroscopy and MD simulation offers a scientific approach to understanding the coal/water interface.

Monovalent ion-graphene oxide interactions are controlled by carboxylic acid groups: Sum frequency generation spectroscopy studies.

Graphene oxide (GO) is a two-dimensional, mechanically strong, and chemically tunable material for separations. Elucidating GO-ion-water interactions at the molecular scale is highly important for predictive understanding of separation systems. However, direct observations of the nanometer region by GO surfaces under operando conditions are not trivial. Therefore, thin films of GO at the air/water interface can be used as model systems. With this approach, we study the effects of alkali metal ions on water organization near graphene oxide films at the air/water interface using vibrational sum frequency generation (SFG) spectroscopy. We also use an arachidic acid Langmuir monolayer as a benchmark for a pure carboxylic acid surface. Theoretical modeling of the concentration-dependent sum frequency signal from graphene oxide and arachidic acid surfaces reveals that the adsorption of monovalent ions is mainly controlled by the carboxylic acid groups on graphene oxide. An in-depth analysis of sum frequency spectra reveals at least three distinct water populations with different hydrogen bonding strengths. The origin of each population can be identified from concentration dependent variations of their SFG signal. Interestingly, an interfacial water structure seemed mostly insensitive to the character of the alkali cation, in contrast to similar studies conducted at the silica/water interface. However, we observed an ion-specific effect with lithium, whose strong hydration prevented direct interactions with the graphene oxide film.