Sum Frequency Generation Studies Research Articles

Probing the electrode-solution interfaces in rechargeable batteries by sum-frequency generation spectroscopy.

An in-depth understanding of the electrode-electrolyte interaction and electrochemical reactions at the electrode-solution interfaces in rechargeable batteries is essential to develop novel electrolytes and electrode materials with high performance. In this perspective, we highlight the advantages of the interface-specific sum-frequency generation (SFG) spectroscopy on the studies of the electrode-solution interface for the Li-ion and Li-O2 batteries. The SFG studies in probing solvent adsorption structures and solid-electrolyte interphase formation for the Li-ion battery are briefly reviewed. Recent progress on the SFG study of the oxygen reaction mechanisms and stability of the electrolyte in the Li-O2 battery is also discussed. Finally, we present the current perspective and future directions in the SFG studies on the electrode-electrolyte interfaces toward providing deeper insight into the mechanisms of discharging/charging and parasitic reactions in novel rechargeable battery systems.

Distinguishing Mesoscale Polar Order (Unidirectional vs Bidirectional) of Cellulose Microfibrils in Plant Cell Walls Using Sum Frequency Generation Spectroscopy.

Cellulose in plant cell walls are synthesized as crystalline microfibrils with diameters of 3-4 nm and lengths of around 1-10 μm. These microfibrils are known to be the backbone of cell walls, and their multiscale three-dimensional organization plays a critical role in cell wall functions including plant growth and recalcitrance to degradation. The mesoscale organization of microfibrils over a 1-100 nm range in cell walls is challenging to resolve because most characterization techniques investigating this length scale suffer from low spatial resolution, sample preparation artifacts, or inaccessibility of specific cell types. Here, we report a sum frequency generation (SFG) study determining the mesoscale polarity of cellulose microfibrils in intact plant cell walls. SFG is a nonlinear optical spectroscopy technique sensitive to the molecular-to-mesoscale order of noncentrosymmetric domains in amorphous matrices. However, the quantitative theoretical model to unravel the effect of polarity in packing of noncentrosymmetric domains on SFG spectral features has remained unresolved. In this work, we show how the phase synchronization principle of the SFG process is used to predict the relative intensities of vibrational modes with different polar angles from the noncentrosymmetric domain axis. Applying this model calculation for the first time and employing SFG microscopy, we found that cellulose microfibrils in certain xylem cell walls are deposited unidirectionally (or biased in one direction) instead of the bidirectional polarity which was believed to be dominant in plant cell walls from volume-averaged characterizations of macroscopic samples. With this advancement in SFG analysis, one can now determine the relative polarity of noncentrosymmetric domains such as crystalline biopolymers interspersed in amorphous polymer matrices, which will open opportunities to study new questions that have not been conceived in the past.

Vibrational sum-frequency generation study of molecular structure, sterical constraints and nonlinear optical switching contrast of mixed alkyl-azobenzene self-assembled monolayers

AbstractSelf-assembled monolayers (SAMs) of azobenzene (AB) functionalized alkyl thiols on gold diluted with simple alkyl thiols provide a straightforward way to photochromic surfaces with high and tunable photoswitching efficiency.Trans-cisisomerization of the AB molecule changes the physical properties of the surface, including the nonlinear optical (NLO) response. Vibrational sum-frequency generation (VSFG) spectroscopy as a nonlinear type of laser spectroscopy offers surface- and orientation-sensitive insight into the molecular structure of mixed SAMs. In this study, VSFG as well as ultraviolet-visible (UV/Vis) spectroscopy has been employed to investigate the morphology, molecular structure, and NLO response of mixed SAMs with systematically varied surface composition. Methylazobenzene (MeAB) has been used as the molecular switch with the methyl substituent serving as orientational VSFG marker. Both short-chain and long-chain alkyl thiol co-ligands have been used to gain insight into the interplay between SAM structure and sterical constraints that are known to limit the free switching volume. Underlining the dominating role of sterical effects for controlling photochromic properties, a strong inhibition of the photoswitching efficiency and NLO response has been observed for the SAMs with an alkyl thiol co-ligand long enough to spatially extend into the layer of the MeAB chromophore. Overall, with <12% signal change, the relative NLO switching contrasts remained low in all cases. VSFG spectral trends clearly revealed that the presumably higher photoswitching efficiency upon dilution with the co-ligand is counteracted by a loss of structural order of the chromophore.

Evolution of Different Structures of the Fungicide Dodine and Changes in the Associated Water at the Air/Water Interface: Vibrational Sum Frequency Generation Study

Fungicides get adsorbed at the interface of air/water and specifically kill fungi that are responsible for damage of the enormous number of crops worldwide. Hence, having an understanding of the structural evolution of fungicides at the air/water interface is of great importance. Surface selective vibrational sum frequency generation (VSFG) technique has been implemented to obtain insights into the different structural evolution of fungicide viz. dodine and its effect on the interfacial water at the air/water interface. Under different concentrations, the hydrocarbon chains of dodine arrange themselves in disordered, ordered, and well-packed states at the air/water interface. The interfacial water gets oriented in the presence of all the states of dodine; however, the hydrogen bond of interfacial water beneath the well-packed state is significantly different from those in the disordered and ordered states. The understanding of the different structures of the hydrocarbon chain of dodine and interfacial water may help in understanding its action mechanism against fungi.

Competitive Adsorption of Lubricant Base Oil and Ionic Liquid Additives at Air/Liquid and Solid/Liquid Interfaces

Oil-soluble ionic liquids (ILs) have been proved as effective additives in lubricant oils through tribological experiments and post-test analytical analyses. In this study, surface structures of lubricant base oil, oil-soluble ILs, and their mixtures at the air/liquid and solid/liquid interfaces have been studied using sum frequency generation (SFG) vibrational spectroscopy. At the air/base oil and air/IL interfaces, the alkyl chains of the studied compounds were shown to be conformationally disordered and their terminal methyl groups point outward at the liquid surface. The base oil dominates the air/(base oil + IL) interface due to its higher surface excess propensity and larger bulk concentration. At the solid (silica) surface, ILs adopt a structure with their charged headgroups in contact with the silica surface, while their alkyl chains are more conformationally ordered or packed compared to the air/IL interface. At the interface between silica and (base oil + IL) mixtures, ILs also preferentially adsorb to the silica surface with their layer structures somewhat different from those of ILs alone. These results showed that ILs can adsorb onto the solid surface even before tribological contacts are made. The insights obtained from this SFG study provide a better understanding of the role of ionic liquids in lubrication.

Structure and Dynamics of Interfacial Peptides and Proteins from Vibrational Sum-Frequency Generation Spectroscopy.

Proteins at interfaces play important roles in cell biology, immunology, bioengineering, and biomimetic material design. Many biological processes are based on interfacial protein action, ranging from cellular communication to immune responses and the protein-driven mineralization of bone. Despite the importance of interfacial proteins, comparatively little is known about their structure. The standard methods for studying crystalline or solution-phase proteins (X-ray diffraction and NMR spectroscopy) are not well-suited for studying proteins at interfaces, and for these proteins we still lack a corresponding technique that can provide the same level of structural resolution. This is not surprising in view of the challenges involved in probing the structure of proteins within monomolecular films assembled at a very thin interface in situ. Vibrational sum-frequency generation (SFG) spectroscopy has the potential to overcome this challenge and investigate the structure and dynamics of proteins at interfaces at the molecular level with subpicosecond time resolution. While SFG studies were initially limited to simple model peptides, the past decade has seen a dramatic advancement of experimental techniques and data analysis methods that has made it possible to also study interfacial proteins and their folding, binding, orientation, hydration, and dynamics. In this review, we first explain the principles of SFG spectroscopy and the experimental and theoretical methods to measure and analyze protein SFG spectra. Then we give an extensive overview of the interfacial proteins studied to date with SFG. We highlight representative examples to demonstrate recent advances in probing the structure of proteins at the interfaces of liquids, membranes, minerals, and synthetic materials.

Insights on the Molecular Characteristics of Molecularly Imprinted Polymers as Monitored by Sum Frequency Generation Spectroscopy.

Sensing in molecularly imprinted polymers (MIPs) requires specific interactions of the imprinted polymer and the approaching template molecule. These interactions are affected by the morphology of the polymer surface, the affinity of the template molecule to the polymer network, and the steric approach. In this particular study, a template molecule, metronidazole, is studied with respect to the typically used methacrylic acid-based imprinted polymer using a combination of bulk and surface techniques. The resulting infrared (IR) spectra exhibited the presence of the template molecule in the polymer matrix as well as their efficient removal after washing. Dipping of the MIP according to what is expected of facile sensing in an aqueous solution of metronidazole did not show any presence of the template molecule in the bulk of the MIP, as observed by IR spectroscopy. However, using sum frequency generation (SFG) spectroscopy, the CH aromatic stretch of the imidazole ring positioned at ∼3100 cm-1 was observed at the polymer surface, including its inner pores or cavities, and at the buried polymer-fused silica interface after dipping. SFG studies have also shown the vibrational signatures of the polymer matrix, the presence of the template molecule on the surface, and the detection of residual template molecules after washing. Increasing the washing time to 50 min has proven to be less effective than increasing the washing cycles to three. However, after the third cycle, reorganization of the polymer matrix was evident as also the complete removal of the template molecule. The observed changes from the acquired images using scanning electron microscopy and atomic force microscopy show the structural morphologies of MIPs and a good distribution of the pores across the MIP surface. The study demonstrates the importance of combining both bulk and surface characterization in providing insight into the template molecule-polymer network interactions.

Electrochemical Oxidation of 5-Hydroxymethylfurfural on Nickel Nitride/Carbon Nanosheets: Reaction Pathway Determined by In Situ Sum Frequency Generation Vibrational Spectroscopy.

2,5-Furandicarboxylic acid was obtained from the electrooxidation of 5-hydroxymethylfurfural (HMF) with non-noble metal-based catalysts. Moreover, combining the biomass oxidation with the hydrogen evolution reaction (HER) increased the energy conversion efficiency of an electrolyzer and also generated value-added products at both electrodes. Here, the reaction pathway on the surface of a carbon-coupled nickel nitride nanosheet (Ni3 N@C) electrode was evaluated by surface-selective vibrational spectroscopy using sum frequency generation (SFG) during the electrochemical oxidation. The Ni3 N@C electrode shows catalytic activities for HMF oxidation and the HER. As the first in situ SFG study on transition-metal nitride for the electrooxidation upgrade of HMF, this work not only demonstrates that the reaction pathway of electrochemical oxidation but also provides an opportunity for nonprecious metal nitrides to simultaneously upgrade biomass and produce H2 under ambient conditions.

Electrochemical Oxidation of 5‐Hydroxymethylfurfural on Nickel Nitride/Carbon Nanosheets: Reaction Pathway Determined by In Situ Sum Frequency Generation Vibrational Spectroscopy

Abstract2,5‐Furandicarboxylic acid was obtained from the electrooxidation of 5‐hydroxymethylfurfural (HMF) with non‐noble metal‐based catalysts. Moreover, combining the biomass oxidation with the hydrogen evolution reaction (HER) increased the energy conversion efficiency of an electrolyzer and also generated value‐added products at both electrodes. Here, the reaction pathway on the surface of a carbon‐coupled nickel nitride nanosheet (Ni3N@C) electrode was evaluated by surface‐selective vibrational spectroscopy using sum frequency generation (SFG) during the electrochemical oxidation. The Ni3N@C electrode shows catalytic activities for HMF oxidation and the HER. As the first in situ SFG study on transition‐metal nitride for the electrooxidation upgrade of HMF, this work not only demonstrates that the reaction pathway of electrochemical oxidation but also provides an opportunity for nonprecious metal nitrides to simultaneously upgrade biomass and produce H2 under ambient conditions.

Heterogenized Molecular Catalysts: Vibrational Sum-Frequency Spectroscopic, Electrochemical, and Theoretical Investigations.

Rhenium and manganese bipyridyl tricarbonyl complexes have attracted intense interest for their promising applications in photocatalytic and electrocatalytic CO2 reduction in both homogeneous and heterogenized systems. To date, there have been extensive studies on immobilizing Re catalysts on solid surfaces for higher catalytic efficiency, reduced catalyst loading, and convenient product separation. However, in order for the heterogenized molecular catalysts to achieve the combination of the best aspects of homogeneous and heterogeneous catalysts, it is essential to understand the fundamental physicochemical properties of such heterogeneous systems, such as surface-bound structures of Re/Mn catalysts, substrate-adsorbate interactions, and photoinduced or electric-field-induced effects on Re/Mn catalysts. For example, the surface may act to (un)block substrates, (un)trap charges, (de)stabilize particular intermediates (and thus affect scaling relations), and shift potentials in different directions, just as protein environments do. The close collaboration between the Lian, Batista, and Kubiak groups has resulted in an integrated approach to investigate how the semiconductor or metal surface affects the properties of the attached catalyst. Synthetic strategies to achieve stable and controlled attachment of Re/Mn molecular catalysts have been developed. Steady-state, time-resolved, and electrochemical vibrational sum-frequency generation (SFG) spectroscopic studies have provided insight into the effects of interfacial structures, ultrafast vibrational energy relaxation, and electric field on the Re/Mn catalysts, respectively. Various computational methods utilizing density functional theory (DFT) have been developed and applied to determine the molecular orientation by direct comparison to spectroscopy, unravel vibrational energy relaxation mechanisms, and quantify the interfacial electric field strength of the Re/Mn catalyst systems. This Account starts with a discussion of the recent progress in determining the surface-bound structures of Re catalysts on semiconductor and Au surfaces by a combined vibrational SFG and DFT study. The effects of crystal facet, length of anchoring ligands, and doping of the semiconductor on the bound structures of Re catalysts and of the substrate itself are discussed. This is followed by a summary of the progress in understanding the vibrational relaxation (VR) dynamics of Re catalysts covalently adsorbed on semiconductor and metal surfaces. The VR processes of Re catalysts on TiO2 films and TiO2 single crystals and a Re catalyst tethered on Au, particularly the role of electron-hole pair (EHP)-induced coupling on the VR of the Re catalyst bound on Au, are discussed. The Account also summarizes recent studies in quantifying the electric field strength experienced by the catalytically active site of the Re/Mn catalyst bound on a Au electrode based on a combined electrochemical SFG and DFT study of the Stark tuning of the CO stretching modes of these catalysts. Finally, future research directions on surface-immobilized molecular catalyst systems are discussed.

Absolute Orientations of Water Molecules at Zwitterionic Polymer Interfaces and Interfacial Dynamics after Salt Exposure.

Nonfouling zwitterionic polymers have wide applications ranging from the naval industry to biomedical engineering. Strong hydration at polymer surfaces has been proven to be crucial to their nonfouling property, but the absolute orientations of water molecules on the polymers and the competition between water and salt binding have not been elucidated. In this work, the absolute orientations of water molecules on two zwitterionic polymer brushes, poly(carboxybetaine methacrylate) (pCBMA) and poly(sulfobetaine methacrylate) (pSBMA), were measured using regular and phase-sensitive sum frequency generation (SFG) vibrational spectroscopy. The pH-dependent studies in a pH range from 2 to 12 showed that at a pH of 7, the water absolute orientations are different on the pCBMS and pSBMA surfaces. Phase-sensitive SFG studies confirmed the results obtained from the pH-dependent measurements. Salt effects on the hydration of zwitterionic polymers were examined as a function of time, which indicated that the pCBMA surface and the associated interfacial water exhibit a slow restructuring process after salt binding (likely due to the strong binding of pCBMA with water), whereas the surface of pSBMA and the associated water have a fast change after salt binding.

Heavy Anionic Complex Creates a Unique Water Structure at a Soft Charged Interface

Ion hydration and interfacial water play crucial roles in numerous phenomena ranging from biological to industrial systems. Although biologically relevant (and mostly smaller) ions have been studied extensively in this context, very little experimental data exist about molecular scale behavior of heavy ions and their complexes at interfaces, especially under technologically significant conditions. It has recently been shown that PtCl62- complexes adsorb at positively charged interfaces in a two-step process that cannot fit into well-known empirical trends, such as Hofmeister series. Here, a combined vibrational sum frequency generation and molecular dynamics study reveals that a unique interfacial water structure is connected to this peculiar adsorption behavior. A novel sub-ensemble analysis of MD simulation results show that after adsorption, PtCl62- complexes partially retain their first and second hydration spheres, and it is possible to identify three different types of water molecules around them based on their orientational structures and hydrogen bonding strengths. These results have important implications for relating interfacial water structure and hydration enthalpy to the general understanding of specific ion effects. This in turn influences interpretation of heavy metal ion distribution across and reactivity within, liquid interfaces.

Heterodyne-Detected Vibrational Sum Frequency Generation Study of Air–Water–Fluoroalcohol Interface: Fluorocarbon Group-Induced Structural and Orientational Change of Interfacial Water

The presence of fluorocarbon group in alcohols provides them unique and important physicochemical properties. Fluoroalcohol containing aqueous interfaces are used in diverse fields, such as liquid–liquid phase separation, chemical reactions, and polymer industry, and so forth. However, the molecular level understanding of interfacial water in the presence of fluorinated alcohol is sparse. In this paper, we have applied phase-sensitive and surface-specific vibrational spectroscopic technique, heterodyne-detected vibrational sum frequency generation, to understand the structure and orientation of interfacial water in the presence of 1,1,1,3,3,3-hexafluoroisopropanol (HFIP). To realize the role of fluorination, the results of the air–water–HFIP interface have been compared with the corresponding hydrogenated alcohol, air–water–isopropanol (IP) interface. It is observed that the net orientation (H-down) and hydrogen bonding of water at the air–water–IP interface are similar to the neat air–water interface. In contrast, water changes its net orientation (H-up) and becomes more inhomogeneous at the air–water–HFIP interface. On increasing the bulk pH (11), the interfacial water becomes increasingly ordered (H-up oriented) at the air–water–HFIP interface, whereas there is no significant change at the air–water–IP interface. At acidic pH (2.8), the interfacial water takes the same H-down orientation for both IP and HFIP, though the average H-bonding is stronger for HFIP. Thus, fluorination of IP changes the preferred orientation and structure of interfacial water, which may be useful in understanding chemical and biochemical processes that occur at fluoroalcohol-containing aqueous interfaces.

Sum frequency generation study of immobilized 3‐aminopropyltriethoxysilane self‐assembled layer on Si(111) substrates

Distribution and orientation of 3‐aminopropyltriethoxysilane (APTES) on a sensing surface play critical role on biosensor, but have not been fully investigated. In this work, the quality of APTES SAM immobilized on the Si(111) substrate was studied by observing sum frequency generation (SFG) response. The polarization, azimuthal angle, and position‐dependent SFG spectra of APTES coverage were obtained. In ppp and psp‐SFG spectra, the CH2 and CH3 vibrational and NH stretching modes were clearly seen around 3000 cm−1 and around 3300 cm−1 regions, respectively. The spp and ssp‐SFG spectra presented too weak signals that the vibrational regions were not clear. The positional and azimuthal angle dependence of the SFG spectra was observed from 0o to 360o with the step of 45o rotation around the surface normal. The 0° is defined as the [ ] direction of Si(111) crystal lying in the incident plane and opposite to the incident k vectors. The appearance of the NH mode was observed to be strongly dependent on the position. The results indicate that the distribution and orientation of APTES molecules were not well ordered on the Si surfaces, suggesting that SFG is an efficient method to check the quality of APTES coverage immobilized on substrates.

Molecular mechanism of charge inversion revealed by polar orientation of interfacial water molecules: A heterodyne-detected vibrational sum frequency generation study.

"Charge inversion" is a phenomenon in which multivalent counterions overcompensate for interfacial charges and invert the sign of the net charge near a surface. This phenomenon is believed to be relevant to biologically important processes such as DNA condensation, and hence it has attracted much attention. We investigated the polar orientation of interfacial water molecules at two different negatively charged interfaces in the absence and presence of La3+ using heterodyne-detected vibrational sum frequency generation spectroscopy, which can directly determine the up/down orientation of interfacial molecules. It was found that the orientations of water molecules at a bio-relevant phospholipid interface change from the hydrogen-up to the hydrogen-down with the addition of 10 µM La3+. This change of water orientation indicates that the net charge at the phospholipid interface is inverted by adsorption of La3+ to the phosphate headgroup. By contrast, at an alkylsulfate interface, the majority of the interfacial water molecules remain hydrogen-up orientated even in the presence of 25 mM La3+, indicating that the sulfate headgroup is still solvated by up-oriented water. The observed headgroup specificity suggests that charge inversion at the phospholipid interface originates primarily from the chemical interaction between the phosphate and La3+ ion.

Interchain Overlap Affects Formation of Silk Fibroin Secondary Structures on Hydrophobic Polystyrene Surface Detected via Achiral/Chiral Sum Frequency Generation.

Silk fibroin (SF) has been engineered in the biomedical applications on account of its structural robustness, biocompatibility, and biodegradability. However, in situ study is still lacking with respect to the formation of SF secondary structures at the interface. In this paper, by using methanol as an inducing agent, the formation of SF secondary structures at the polystyrene (PS)/SF solution interfaces was detected with achiral and chiral sum frequency generation (SFG) vibrational spectroscopy. SF solutions with two concentrations above and below the critical overlapping concentration ( C*) of SF (∼1.8 mg/mL) were chosen, namely, 90 and 1 mg/mL. We found that above C*, before adding methanol to the protein solution, no ordered SF secondary structures could be detected at the PS/SF solution interface; oppositely, after adding methanol to the protein solution, ordered SF secondary structure, for example, antiparallel β-sheet, could be formed at the PS/protein solution interface. Below C*, both before and after adding methanol to the SF solution, ordered SF secondary structure such as antiparallel β-sheet could be formed. Besides, the addition of methanol could induce the formation of an extended helical structure, verified by the achiral and chiral characteristic bands. Because C* represents a critical solution concentration above which the SF chains can interact with each other and below which the SF chains are isolated in the solution, this achiral/chiral SFG study emphasizes the importance of the chain-chain interaction or spatial confinement on the formation of the protein secondary structures, which provides an additional dimension for the future study of interfacial protein folding.

A set-up for simultaneous measurement of second harmonic generation and streaming potential and some test applications

We present a measurement cell that allows simultaneous measurement of second harmonic generation (SHG) and streaming potential (SP) at mineral-water interfaces with flat specimen that are suitable for non-linear optical (NLO) studies. The set-up directly yields SHG data for the interface of interest and can also be used to obtain information concerning the influence of flow on NLO signals from that interface. The streaming potential is at present measured against a reference substrate (PTFE). The properties of this inert reference can be independently determined for the same conditions. With the new cell, for the first time the SHG signal and the SP for flat surfaces have been simultaneously measured on the same surface. This can in turn be used to unambiguously relate the two observations for identical solution composition. The SHG test of the cell with a fluorite sample confirmed previously observed differences in NLO signal under flow vs. no flow conditions in sum frequency generation (SFG) investigations. As a second test surface, an inert (“hydrophobic”) OTS covered sapphire-c electrolyte interface was studied to verify the zeta-potential measurements with the new cell. For this system we obtained combined zeta-potential/SHG data in the vicinity of the point of zero charge, which were found to be proportional to each other as expected. Furthermore, on the accessible time scales of the SHG measurements no effects of flow, flow velocity and stopped flow occurred on the interfacial water structure. This insensitivity to flow for the inert surface was corroborated by concomitant molecular dynamics simulations. Finally, the set-up was used for simultaneous measurements of the two properties as a function of pH in automated titrations with an oxidic surface. Different polarization combinations obtained in two separate titrations, yielded clearly different SHG data, while under identical conditions zeta-potentials were exactly reproduced. The polarization combination that is characteristic for dipoles perpendicular to the surface scaled with the zeta-potentials over the pH-range studied, while the other did not. The work provides an advanced approach for investigating liquid/surface interactions which play a major role in our environment. The set-up can be upgraded for SFG studies, which will allow more detailed studies on the chemistry and the water structure at a given interface, but also the combined study of specific adsorption including kinetics in combination with electrokinetics. Such investigations are crucial for the basic understanding of many environmental processes from aquatic to atmospheric systems.

Combined Sum Frequency Generation and Thin Liquid Film Study of the Specific Effect of Monovalent Cations on the Interfacial Water Structure.

Some salts have been recently shown to decrease the sum frequency generation (SFG) intensity of the hydrogen-bonded water molecules, but a quantitative explanation is still awaited. Here, we report a similar trend for the chloride salts of monovalent cations, that is, LiCl, NaCl, and CsCl, at low concentrations. Specifically, we revealed not only the specific adsorption of cations at the water surface but also the concentration-dependent effect of ions on the SFG response of the interfacial water molecules. Our thin-film pressure balance (TFPB) measurements (stabilized by 10 mM of methyl isobutyl carbinol) enabled the determination of the surface potential that governs the surface electric field affecting interfacial water dipoles. The use of the special alcohol also enabled us to identify a remarkable specific screening effect of cations on the surface potential. We explained the concentration dependency by considering the direct ion-water interactions and water reorientation under the influence of surface electric field as the two main contributors to the overall SFG signal of the hydrogen-bonded water molecules. Although the former was dominant only at the low-concentration range, the effect of the latter intensified with increasing salt concentration, leading to the recovery of the band intensity at medium concentrations. We discussed the likelihood of a correlation between the effect of ions on reorientation dynamics of water molecules and the broad-band intensity drop in the SFG spectra of salt solutions. We proposed a mechanism for the cation-specific effect through the formation of an ionic capacitance at the solution surface. It explains how cations could impart the ion specificity while they are traditionally believed to be repelled from the interfacial region. The electrical potential of this capacitance varies with the charge separation and ion density at the interface. The charge separation being controlled by the polarizability difference between anions and cations was identified using the SFG response of the interfacial water molecules as an indirect probe. The ion density being affected by the absolute polarizability of ions was tracked through the measurement of the surface potentials and Debye-Hückel lengths using the TFPB technique.

Influence of High pH on the Organization of Acetonitrile at the Silica/Water Interface Studied by Sum Frequency Generation Spectroscopy.

The acetonitrile-water mixture is one of the most commonly used solvents in hydrophilic interaction chromatography, which contains silica as the solid phase. As such, the silica/acetonitrile-water interface plays a large role in the separation of compounds. Varying the pH is one way to influence retention times, particularly of ionizable solutes, yet the influence of high pH is often unpredictable. To determine how the structure of this interface changes with pH, we utilized the surface specific technique sum frequency generation (SFG). Previous SFG studies at neutral pH have suggested the existence of acetonitrile bilayers at the aqueous silica interface even at low acetonitrile mole fractions. Here we find that the SFG signal from 2900 to 3040 cm-1 at the silica/acetonitrile-water interface increased as we adjusted the aqueous pH from near neutral to high values. This increase in signal was attributed to a greater amount of aligned water which is consistent with an increase in silica surface charge at high pH. In contrast, complementary measurements of the silica/acetonitrile-deuterium oxide interface revealed that the acetonitrile methyl mode nearly vanished as the aqueous pH was increased. This loss of methyl mode signal is indicative of a decrease in the number density of acetonitrile molecules at the interface, as orientation analysis indicates no significant change in the net orientation of the outer leaflet of the acetonitrile bilayer over the pH range studied.

Understanding Protein-Interface Interactions of a Fusion Protein at Silicone Oil-Water Interface Probed by Sum Frequency Generation Vibrational Spectroscopy

Protein adsorbed at the silicone oil-water interface can undergo a conformational change that has the potential to induce protein aggregation on storage. Characterization of the protein structures at interface is therefore critical for understanding the protein-interface interactions. In this article, we have applied sum frequency generation (SFG) spectroscopy for studying the secondary structures of a fusion protein at interface and the surfactant effect on protein adsorption to silicone oil-water interface. SFG and chiral SFG spectra from adsorbed protein in the amide I region were analyzed. The presence of beta-sheet vibrational band at 1635 cm−1 implies the protein secondary structure was likely perturbed when protein adsorbed at silicone oil interface. The time-dependent SFG study showed a significant reduction in the SFG signal of preadsorbed protein when polysorbate 20 was introduced, suggesting surfactant has stronger interaction with the interface leading to desorption of protein from the interface. In the preadsorbed surfactant and a mixture of protein/polysorbate 20, SFG analysis confirmed that surfactant can dramatically prevent the protein adsorption to silicone oil surface. This study has demonstrated the potential of SFG for providing the detailed molecular level understanding of protein conformation at interface and assessing the influence of surfactant on protein adsorption behavior.