Sulfide Liquid Research Articles

The cobalt and nickel enrichment in base metal sulfides from the Xiarihamu Cu-Ni-Co deposit, China: Constrained by in-situ mineral geochemistry of sulfides

Rapidly growing demand for cobalt and nickel in rechargeable battery industry promotes research on metallogenic theory of magmatic Cu-Ni-Co sulfide deposits. Xiarihamu Cu-Ni-Co deposit, one of the lately discovered Co-rich magmatic sulfide deposits in China, is typical of distribution in orogenic belts, rather than in divergent tectonic settings as many deposits of the same type. In-situ elemental and sulfur isotopic analyses of base metal sulfides (BMS; pyrrhotite, pentlandite, and chalcopyrite) from Xiarihamu were conducted in this study. The strongly negative correlation between Fe and Co + Ni reveals the major occurrence of Co and Ni as isomorphism states in pentlandite and pyrrhotite. The δ34S values of pentlandite and pyrrhotite generally increase with Co contents and Co/Ni ratios, indicating that the Co enrichment within BMS accompanied with enhanced contamination of crustal sulfur. Zinc, Cd, Sb, and Te are significantly and preferentially fractionated into intermediate sulfide solution (ISS) from which chalcopyrite exsolved. The Se contents and Se/S ratios of pentlandite and pyrrhotite in lherzolite/harzburgite are much higher than those of BMS from gabbro, which has systematically higher δ34S values. Combined with the partially overlapped Sb/Se and As/Se ratios of BMS from lherzolite and gabbro, as well as similar calculated R factors of ore-hosting peridotite and gabbro, it is proposed that the studied Xiarihamu gabbro was crystallized from a separate pulse of Co-Ni-enriched, Se-depleted and intensively contaminated mafic parent magma, rather than evolved from ultramafic magma through crystallization fractionation. The lack of olivine and spinel in gabbro also promoted more Co and Ni into sulfide liquid. Based on Se/Te ratios, the pentlandite and pyrrhotite from drill core XH1E01S was originated from sulfide liquid, which suffered higher degree of crystallization fractionation of monosulfide solution (MSS). While pentlandite and pyrrhotite that crystallized from less evolved parent sulfide liquid bear less cobalt, such as those collected from drill core XH1109. This study strengthens the potential importance of crustal contamination and crystallization fractionation of MSS from sulfide liquid during Co enrichment within BMS (pentlandite and pyrrhotite).

Trace element and isotope composition of calcite, apatite, and zircon associated with magmatic sulfide globules

AbstractThe formation of volatile-rich phases in magmatic sulfide systems has been interpreted at least in six different ways. The most popular model attributes their origin to secondary processes, mostly due to the presence of serpentine, chlorite, phlogopite, amphibole, and calcite. While chlorite and serpentine are likely to form as alteration products, the other volatile-rich minerals have the potential to originate in a range of ways, including by primary magmatic processes. Based on mineralogical and petrological studies, it was recently suggested that volatile- and incompatible element-rich halos around sulfide globules may form due to the interaction between three immiscible liquids: silicate, carbonate, and sulfide. This hypothesis was confirmed by experimental data revealing the systematic envelopment of sulfide globules by carbonate melt, indicating their mutual affinity. In this study, we present data on isotopic signatures and trace element distributions of three minerals commonly found in spatial association with sulfides—calcite, apatite, and zircon—to address the question of the source and nature of volatiles and other incompatible elements involved in the formation of the halos. Here we compare our new hypothesis with all the previously proposed explanations to show if they can be consistent with obtained results. Our findings indicate that both mantle and crustal sources play a role in the formation of volatile- and incompatible element-rich halos, strongly correlating with sulfur isotope data previously reported for the sulfide globules in the same intrusions. This correlation confirms the shared origin of sulfides, carbonate and fluids during ore-forming processes, ruling out the secondary origin of volatile-rich phases. The isotope and trace element signatures support the newly proposed hypothesis that volatile- and incompatible element-rich halos could have been formed due to the interaction of immiscible sulfide, carbonate, and silicate melts. The volatile-rich carbonate melt could be sourced from the mantle or it could be added from the crust. Regardless of the origin, carbonate melt and sulfide liquid both immiscible with mafic magma tend to stick to each other resulting in the formation of volatile- and incompatible element-rich halos commonly documented in magmatic sulfide deposits.

Petrogenetic relationship of the variably Ni−Cu−platinum-group element (PGE)-mineralized intrusions of the Thunder Bay North Intrusive Complex, Midcontinent Rift, Canada: Implications for mineral exploration in mafic−ultramafic complexes

The Thunder Bay North Intrusive Complex (TBNIC) of Canada comprises six variably Ni−Cu−platinum-group element (PGE)-mineralized mafic−ultramafic intrusions that intruded the Archean Quetico Subprovince. These are the Current, Escape, Lone Island, Greenwich, and 025 intrusions, with the former three aligned along an east−west-trending intrusion termed the East−West Corridor. These intrusions have a consistent igneous stratigraphy comprising, from bottom to top, peridotite, gabbros, and quartz gabbro. Only the Current and Escape intrusions are known to host sulfide mineralization in the peridotite. Despite the economic significance of the TBNIC, little work has been done to characterize its petrogenetic evolution and the causes of the apparent variable fertility. Our new ages for Escape (1107.6 ± 0.9 Ma) and Greenwich (1105.7 ± 0.9 Ma), combined with previously determined ages for Current (1106.6 ± 1.6 Ma) and Lone Island (1106.3 ± 2.1 Ma), demonstrate that the TBNIC was emplaced as part of the ca. 1.1 Ga Midcontinent Rift event. The similarities in their rare earth element geochemistry and consistently low Th/La−Sri values indicate that the intrusions crystallized from genetically related magmas that did not assimilate significant amounts of crustal material. Accordingly, their systematically negative εNdt values and Nb anomalies likely reflect that their parent magmas were largely sourced from the subdcontinental lithospheric mantle and not the Keweenaw Plume. Given their genetic relationship, the variable fertility of the intrusions cannot be related to processes that occurred in their mantle sources. Since the gabbros have systematically depleted Cu/Zr−Cu/Pd ratios and the peridotites have enriched ratios, the apparent variable fertility is likely related to the timing and location of sulfide segregation and accumulation, with the barren gabbros preserving magmas that lost sulfide liquid during transport to shallow crustal levels, and the mineralized peridotites recording accumulation of sulfide liquid. This interpretation has important implications for exploration as it implies that sulfide mineralization in the apparently barren intrusions may be located at depth in undiscovered ultramafic cumulates.

Multi-stage magma emplacement in the western end of the Jinchuan Ni[sbnd]Cu sulfide deposit, NW China, and mineral exploration strategy based on exploration data

The western intrusion of the world-class Jinchuan NiCu sulfide deposit consists of fine-grained and coarse-grained binary lithofacies units. However, recent exploration has revealed two layers of net-textured sulfides in the fine-grained unit at the western end of the Jinchuan intrusion, adding complexity to the genesis of sulfide mineralization. We measured chalcophile elements and collected exploration data on Cu and Ni content to investigate their genesis and prospecting potential. The lower fine-grained subunits, comprising a layer of disseminated sulfides (DS-1) in the bottom and overlain by massive sulfide (MS) and olivine-sulfide cumulates (NTS-1), were overlain by the upper fine-grained subunits disseminated sulfides (DS-2) with a core of net-textured sulfides (NTS-2). The coarse-grained lherzolite with disseminated sulfides (DS-3) sharply cut through the upper subunit. All disseminated samples have Cu/Pd ratios (11,414–128,626) that exceed the mantle range. Additionally, the Pd/Ru ratios of DS-1 (1.26–13.2) are the lowest, followed by DS-2 (3.69–13.5), and highest in DS-3 (2.80–33.6). The exploration data indicate that the Ni and Cu contents and Cu/(Cu + Ni) ratios are significantly higher in DS-3 than in DS-2, while DS-1 shows more dispersed. The NTS-1 exhibits significant Ir and Ru depletion, with Cu/(Cu + Ni) decreasing with depth, eventually encountering Ir and Ru-riched MS. In addition, NTS-2 shows partially Ir depletion but Ru non-depletion, and Cu/(Cu + Ni) increases with depth. These signatures suggest that the lower and upper subunits, along with the coarse-grained unit, formed from platinum-group elements (PGE) in increasingly depleted magma, likely resulting from prior sulfide segregation before emplacement. Furthermore, the differences in Ir and Ru depletion and the variation in the Cu/(Cu + Ni) trend with depth between NTS-1 and NTS-2 were explained by the migration direction of fractional sulfide liquid during sulfide fractionation. We propose that the western end of the Jinchuan intrusion was formed by multi-stage magma emplacement. The strong correlation between exploration data (Ni, Cu, and Cu/(Cu + Ni)) and various sulfide mineralization layers suggests that delineating the spatial range of each sulfide mineralization could provide valuable information for deep mineral prospectivity mapping.

Copper isotope fractionation during magmatic evolution in a convergent tectonic setting: Constraints from sulfide Cu-S isotopes and whole-rock PGE of the Xiarihamu Ni-Cu sulfide deposit

Nickel and cobalt are potentially critical metals in many countries because of their great significance for national security and economic development, and they are mainly derived from magmatic Ni-Cu‑platinum-group element (PGE) sulfide ore deposits hosted in mafic-ultramafic intrusions. Although Cu isotopes have been used to trace the metallogenic processes in Ni-Cu-(PGE) sulfide deposits, the Cu isotopic fractionation mechanism during magma generation and evolution in convergent tectonic settings is still debated. The Xiarihamu magmatic NiCu sulfide deposit, located in the East Kunlun orogenic belt, northern Tibetan Plateau, is the world's largest known magmatic NiCu sulfide deposit in an orogenic setting. Here we report the whole-rock element and sulfide CuS isotope compositions of samples from the Xiarihamu deposit. The δ65Cu and δ34S values of the sulfide grains from the massive, heavily disseminated, and disseminated sulfide ores range from 0.19 ‰ to 0.79 ‰, and from 4.2 ‰ to 9.4 ‰, respectively. Most of the samples have δ65Cu values higher than normal mantle values, except for two samples with δ65Cu values within the mantle composition range. The whole rock S/Se ratios range from 3200 to 22,500, and the Cu/Pd ratios range from 330 to 820,000, which are also mainly higher than the corresponding mantle values. Modeling calculations of the δ65Cu, S/Se, and Cu/Pd values reveal that the sulfide liquid to silicate melt mass ratio (R factor) is not the main reason for the observed δ65Cu variations in the Xiarihamu deposit. The variations in the Cu/Pd ratios of the whole-rock samples, and the sulfide δ65Cu and δ34S values with depth indicate that sulfide segregation and crustal contamination can reasonably jointly produce the Cu isotope variations in the Xiarihamu deposit, and the variations of samples from different parts of the deposit are caused by variations in these controlling factors. Therefore, Cu isotope fractionation in convergent tectonic settings is mainly caused by magma evolution. The complicated controlling factors of the Cu and S isotopes indicate that the correlation between δ65Cu and δ34S values may not be helpful in evaluating the metallogenic potential of Ni-Cu-(PGE) sulfide deposits. Cu isotopes can be used to ascertain the migration path of magmas.

Symplectite formation in ultramafic achondrites by impact percolation of a sulfide melt

The ungrouped dunitic achondrite Northwest Africa (NWA) 12217 contains symplectic spinel-pyroxene veins that are mineralogically identical to symplectites in other ultramafic planetary materials. The morphology and amount of chromite present in these features relative to the Cr in their olivine hosts suggest an exogenous origin. Petrological experiments show that a Cr laden sulfide liquid reacts with olivine to produce pyroxene by scavenging Mg and Fe from olivine to crystallize chromite. The liquid infiltrates cracks and grain boundaries within the olivine and produces a vein-like symplectic chromite-pyroxene mineralogy similar to that observed in NWA 12217. This process is likely responsible for forming the symplectites in the related ultramafic achondrites NWA 12319, 12562, and 13954, along with many other achondrites. The nucleosynthetic Cr isotopic composition of chromites appears to be in disequilibrium with that of silicates in NWA 12217, suggesting that the liquids responsible for the symplectite forming reaction are at least partially sourced from a different parent body and result from an impact.

Lower crustal copper enrichment and mobilization indicated by Late Permian amphibole gabbros and granodiorites in the eastern Kunlun Orogen, northern Tibet

Lower crustal fractional crystallization accompanied by sulfide saturation in thick continental arcs has been viewed as an essential step in forming porphyry Cu systems. These processes are supposed to lock Cu in the lower crust and, therefore, can be unfavorable to the generation of ore-forming magmas. In this study, we present in situ mineral major-trace elements, pyrrhotite S isotopes, and zircon UPb ages, as well as whole-rock major-trace elements and SrNd isotopes for amphibole gabbros and contemporary granodiorites in the eastern Kunlun Orogen to elucidate Cu variations during the transcrustal magmatic evolution of these rocks. The amphibole gabbros can be divided into two types based on field relationships with the granodiorites. These rocks were derived from an oxidized metasomatic mantle in a steep subduction setting at ∼250 Ma and experienced a transcrustal magmatic evolution. Orthopyroxene relicts, resorbed clinopyroxene, calcic plagioclase, high-Al2O3 amphibole, and magnetite in the amphibole gabbros of the first type are lower crustal cumulate minerals. Pyrrhotite with minor amounts of chalcopyrite, interstitial to cumulate amphibole or as inclusions in magnetite from the amphibole gabbros of the first type, is lower crustal Ni-rich monosulfide solid solution (mss) crystallized from immiscible sulfide melts with residual Cu-rich sulfide liquids. These lines of evidence together with field, mineralogical, and geochemical data indicate that the Cu-rich parental magmas experienced lower crustal MASH (melting, assimilation, storage, and homogenization) processes and became Cu-depleted. The evolved magmas after lower crustal evolution became moderately oxidized and Cu-normal according to amphibole, biotite, zircon, and whole-rock compositions. The moderately oxidized magmas scavenged and mobilized Cu from Cu-rich sulfide liquids to the upper crustal magma chambers where degassing dispersed the Cu and thus was unfavorable to porphyry Cu mineralization.

Carbonated magmatic sulfide systems: Still or sparkling?

For decades, there has been debate surrounding the transport of dense metal-rich sulfide liquid in mafic magmas. This topic is crucial to understanding the genesis of valuable resources of nickel, copper, and platinum-group elements, which are essential for a sustainable, emission-free energy future. Recent studies of mineralized mafic magmas suggested that gas bubbles adhere to sulfide globules, reducing their density and favoring upward transport. While this hypothesis may explain sulfide mobility in near-surface magmatic environments, it is at odds with key mineralogic and textural observations and does not explain how long-distance sulfide transport operates. Here, we suggest an alternative hypothesis that builds on previous observations, focusing on the interaction between carbonate melt and sulfide liquid. We demonstrate experimentally that carbonate melt wraps sulfide globules forming a relatively mobile pair that may mediate metal-rich sulfide transport from mantle to crust.

Magnetite geochemistry as a proxy for metallogenic processes: A study on sulfide-mineralized mafic–ultramafic intrusions peripheral to the Kunene Complex in Angola and Namibia

AbstractTrace element concentrations in magnetite are dictated by the petrogenetic environment and by the physico-chemical conditions during magmatic, hydrothermal, or sedimentary processes. This makes magnetite chemistry a useful tool in the exploration of ore-forming processes. We describe magnetite compositions from Ni-Cu-(PGE)-sulfide mineralized rocks from seven mafic–ultramafic intrusions peripheral to the Mesoproterozoic AMCG (anorthosite-mangerite-charnockite-granite) suite of the Kunene Complex of Angola and Namibia to investigate metallogenic processes through the geochemical characterization of Fe-oxides, which were analyzed in-situ via Electron Probe Microanalysis (EPMA), and Laser Ablation-Inductively Coupled Plasma-Mass Spectrometry (LA-ICP-MS). We identified magmatic magnetite, segregated from both a silicate liquid and an immiscible sulfide liquid. Elements like Cr, Co and V suggest that the sulfide-related magnetite segregated from a relatively primitive Fe-rich monosulfide solid solution (MSS). Secondary Cr-rich magnetite appears in intrusions with abundant chromite or Cr-spinel. Two types of hydrothermal magnetite were identified, related to the pervasive replacement of sulfides and a late-stage, low-T fluid circulation event. Magnetite replacing sulfides is associated with serpentinized ultramafic rocks and is preferentially observed in the intrusions with the highest base and precious metal tenors. The high concentration of Ni, Co, Cu, Pd, As and Sb in these grains is corroborated by the identification of micron-size PGE mineral inclusions. We infer that serpentinization during hydrothermal fluid circulation was accompanied by desulphurization of sulfides with metal remobilization and reconcentration to generate magnetite carrying Pd microinclusions. We suggest that the highly serpentinized ultramafic rocks in the Kunene Complex region may become a possible target for economic Ni-Cu-(PGE) mineralization.

Geochemical Thermometry of Ore-Bearing Gabbronorites from the Apophisis of the Yoko-Dovyren Massif: Composition, Amount of Olivine, and Conditions of Sulphide Saturation in the Parental Magma

The temperature and compositional parameters of the parental magma of the ore-bearing apophysis DV10 from the Yoko-Dovyren massif are estimated based on the results of thermodynamic modeling the equilibrium crystallization of melts of 24 samples, following the method of geochemical thermometry. Thermometric calculations were carried out using the COMAGMAT-5.3 program with a step of 0.5 mol. % to a maximum degree of crystallization 75–85% under oxygen fugacity controlled by the QFM buffer. The model order of mineral crystallization corresponds to the sequence: olivine (Ol) + + Cr-Al spinel (Spl) → plagioclase (Pl) → high-Ca pyroxene (Cpx) → orthopyroxene (Opx). Silicate-sulfide immiscibility was modeled to occur mostlybefore the onset of plagioclase crystallization, being consistent with sulfide saturation of the parental magma. The results of calculations demonstrate the convergence and intersection of the model liquid lines of descent at temperatures of about 1185°C. When applied to the average composition of the DV10 apophysis, this temperature indicates the existence of a suspension of the original crystals (52.1 wt. % cumulus olivine (Fo83.6), 2.3 wt. % plagioclase (An79.7), 0.24% clinopyroxene (Mg# 88.8), 1 wt. % aluminochromite (Cr# 0.62)) and about 0.2% sulfide liquid in a moderately magnesian melt (53.6 wt. % SiO2, 7.4 wt. % MgO). At that the solubility of sulfide sulfur (SCSS) was estimated to be 0.083 wt. %. This heterogeneous system had a viscosity of 4.71 log. units (Pa · s) and an integral density of 2929 kg/m3. Such rheological properties do not contradict the possibility of the migration and emplacement of the protocumulus mush from the main Dovyren chamber. However, a more probable scenario includes a localized accumulation of olivine in the trough-like part of the DV10 subchamber, which preceded or occurred in parallel to the accumulation of segregated sulfides.

New metamorphic constraints on the Nova-Bollinger Ni–Cu deposit, Fraser Zone, Western Australia

Metamorphic investigations were conducted using mineral chemistry, phase equilibria modelling and conventional thermobarometry on four metamorphic country rock samples from the Nova-Bollinger Ni–Cu deposit, Western Australia. New P–T constraints obtained from phase equilibria modelling of garnet-bearing granulites and cordierite–sillimanite-bearing metasedimentary rocks indicate that the Nova-Bollinger deposit formed at mid-crustal depths (0.75–0.76 GPa and 880–920 °C), along high thermal gradients around 1200 °C/GPa. Peak metamorphic conditions are consistent with those obtained from the Nova-Bollinger intrusive rocks, and with metagabbros from the southern Fraser Zone, but are slightly elevated relative to metapelites examined in the southern Fraser Zone. The peak metamorphic conditions at Nova-Bollinger reflect the combined effects of regional-scale high-T conditions during orogenesis superimposed by contact metamorphism in a thermal aureole adjacent to the Nova-Bollinger mafic–ultramafic magmas. Thermal metamorphism may have been further enhanced by local heat transfer from intruding sulfide liquid, which pervasively infiltrated country rocks on scales of tens to hundreds of metres beneath the orebodies. This additional heat source may be locally significant, despite being volumetrically limited. Retrograde P–T conditions were determined by garnet–biotite conventional thermobarometry of garnet-core–matrix biotite pairs (0.29–0.45 GPa and 550–640 °C). These P–T conditions suggest that the Nova-Bollinger country rocks cooled along a near-isobaric cooling path and reflect the effects of thermal decay following emplacement of voluminous magmas into the Fraser Zone during Stage I Albany–Fraser Orogeny.

Sulfide Copper‐Iron Isotopic Fractionation During Formation of the Kalatongke Magmatic Cu‐Ni Sulfide Deposit in the Central Asian Orogenic Belt

AbstractCopper and iron isotopic signatures in sulfide and silicate minerals are important genetic indicators in magmatic sulfide deposits. Kalatongke is a large‐scale magmatic Cu‐Ni sulfide deposit in the Central Asian Orogenic Belt, and one that experienced multiple stages of magmatism and contamination. It is an ideal deposit in which to study Cu‐Fe isotopic fractionation during multiple stages of magmatism and sulfide mineralization processes. The Kalatongke sulfide orebodies are hosted by three small mafic intrusions in which pyroxene and sulfides (pyrrhotite, pentlandite, and chalcopyrite) are the most common Fe‐rich minerals, and chalcopyrite is the dominant Cu‐rich mineral. Sulfide liquid and silicate melt ▵56FeSul‐Sil (0.03–0.19‰) and ▵65CuCcp‐Sil (−0.78–0.74‰) values are indicative of non‐equilibrium fractionation. Most of the Cu isotope compositions in the sulfide ores at Kalatongke can be modeled as subduction‐ metasomatized, oxidized mantle source‐derived silicate melt (initial δ57Fe = 0.15‰, δ65Cu = −0.07‰) that underwent lower crustal contamination, and then reacted with silicate melt, having an R factor of 100–1,000. Rapid silicate melt and sulfide liquid Fe isotope exchange and re‐equilibration between chalcopyrite and pyrrhotite in the massive ores is reflected in the similarity of their δ56Fe values. Sulfide in disseminated ores shows a range of Fe isotope ratios, influenced by the proportions of monosulfide solid solution (MSS) and intermediate solid solution (ISS) formed. Copper isotopes can be utilized to characterize crustal contamination and silicate melt‐sulfide liquid interaction, while the Fe isotope ratios of sulfide minerals record sulfide liquid segregation and evolution in magmatic sulfide deposits.

Redox control of the partitioning of platinum and palladium into magmatic sulfide liquids

The partitioning behavior of platinum group elements in magmas is critical for their use as tracers of planetary accretion and in understanding magmatic sulfide deposits. Here we use laboratory experiments to determine sulfide liquid–silicate melt partition coefficients for platinum and palladium at 1.5 GPa, 1400 °C, and oxygen fugacity 1.5–2 log units above the fayalite–magnetite–quartz buffer. We find that the partitioning coefficients of these elements are 2.3 × 105 to 1.1 × 106 and are independent of the platinum and palladium concentration in the system. Combined with previous data obtained at oxygen fugacity below the fayalite–magnetite–quartz buffer, this indicates redox-controlled partitioning behavior whereby at oxidizing conditions platinum- and palladium-enrichments are achieved through their dissolution in sulfide liquids, while at reducing conditions the entrapment of platinum- and palladium-rich clusters in sulfide liquids is more critical. This redox-controlled partitioning behavior should be considered when studying crust–mantle differentiation and the formation of magmatic sulfide deposits.

Sulfur isotopes in Archaean crustal reservoirs constrain the transport and deposition mechanisms of nickel-sulfides in komatiites

Assimilation and prolonged suspension of crust-derived sulfide liquid in komatiites are essential to form Ni-rich mineralisation. Evaluating the spatial relationship between komatiite-hosted Ni mineralisation and crustal S sources may thus provide insights into mechanisms of transport, metal enrichment and deposition of assimilated sulfide liquid. This study applied facies analysis and S isotopes to sulfides in Ni-mineralised komatiites and stratigraphically underlying bimodal volcanic-volcaniclastic and sedimentary rocks, which formed during rifting in the Agnew-Wiluna Greenstone Belt, Western Australia. The results revealed a lateral variation from rift-distal sedimentary sulfides, through sulfidic BIF, to rift-proximal VMS-style sulfides, the latter of which was predominantly assimilated by komatiites. Both crustal and komatiite-hosted sulfides were overprinted by granite-related skarn alteration during later basin inversion. Spatial S isotopes correlation revealed that Ni mineralisation in komatiites predominantly formed < 5 km from their crustal S sources, excluding long lateral transport as the main metal enrichment mechanism. Rather, metal enrichment likely happened through multiple cycles of sulfide entrapment and entrainment in lava flow vortices that formed in the wake of topographic steps represented by syn-rift faults. These faults were the main loci for pre-existing crustal weaknesses, hydrothermal fluid circulation, and VMS-style sulfide deposition, which were subsequently utilised by komatiites for enhanced thermo-mechanical erosion and crustal sulfide assimilation. This study shows that proximity to the syn-rift faults was the dominant control on the formation of komatiite-hosted Ni–sulfide mineralisation, regardless of substrate lithology. The S isotope signatures of crustal sulfides may be used as a proxy to identify syn-rift faults in highly deformed terranes.

Platinum-Group Element Geochemistry of Igneous Rocks in the Chongjiang Cu–Mo–Au Deposit, Southern Tibet: Implications for the Formation of Post-Collisional Porphyry Cu Deposits

Abstract The timing and extent of sulfide saturation have been suggested as controlling factors in the formation of economically significant porphyry Cu deposits in subduction zone settings. However, details on the sulfide saturation history in post-collisional porphyry systems remain ambiguous. Accordingly, we have characterized the whole-rock geochemistry, including platinum-group elements (PGE), of igneous intrusions in the post-collisional Chongjiang porphyry Cu–Mo–Au deposit (southern Tibet) and utilize this data in conjunction with zircon U–Pb geochronological results and sulfide chemistry to assess the timing of sulfide saturation, the nature and amount of magmatic sulfide produced. The Chongjiang intrusions (monzogranite, biotite monzogranite porphyry, granodiorite, dacite porphyry, and quartz diorite porphyry) and mafic microgranular enclaves (MMEs) have zircon U–Pb ages of 14.2 to 12.8 Ma. Covariations in whole-rock major and trace elements among the Chongjiang intrusions and MMEs, together with similarities in their Sr–Nd and zircon Hf isotope compositions, indicate that they are co-magmatic and crystallized from a juvenile lower crustal melt that mixed with mafic melt derived from the lithospheric mantle; this hybrid melt subsequently evolved via fractional crystallization. Trace-element ratios in zircon and temperature − ∆FMQ estimates of the different intrusions suggest that they all crystallized from oxidized (average ∆FMQ = 1.9–2.6) and water-rich magmas. Palladium contents and Pd/Pt ratios in the Chongjiang igneous intrusions increase with decreasing MgO up to 3.9 wt % MgO, after which they abruptly decrease. The initial increase in Pd/Pt ratios likely results from the fractionation of a Pt-rich mineral (e.g. Pt–Fe alloy). The decrease in Pd contents and Pd/Pt ratios at 3.9 wt % MgO likely results from sulfide saturation during magma evolution, but prior to volatile exsolution, which occurred at approximately 1.4 to 2.4 wt % MgO. The presence of magmatic sulfide inclusions in amphibole and magnetite in samples with 3.9 wt % MgO, and the geochemical compositions of sulfide inclusions suggest that they represented trapped sulfide liquid and intermediate solid solution. Results of Monte Carlo simulations demonstrate that 0.003 to 0.009 wt % magmatic sulfide is required to have fractionated from the magma to explain the decrease in Pd contents at 3.9 wt % MgO. Highly chalcophile elements, such as Pd, will be sequestered by the magmatic sulfide that saturates at depth, decreasing their concentrations in the residual silicate melt, whereas concentrations of the less chalcophile elements, such as Cu, Mo, and even Au, will not be as significantly affected. Consequently, sufficient concentrations of Cu–Mo–Au will remain in the residual melt and, upon reaching volatile saturation, can be transported by the vapor phase to form porphyry Cu–Mo–Au deposits. In the case of the Chongjiang deposit, sulfide saturation was likely triggered by the high pressures and/or depletion of FeO caused by the thick (~70 km) crust beneath the Gangdese belt. This contribution presents evidence of sulfide saturation in post-collisional magmatic systems, and demonstrates that the amount of magmatic sulfide produced is a critical factor in controlling the formation of post-collisional porphyry Cu deposits.

How and when do Pt- and Pd-semimetal minerals crystallize from saturated sulfide liquids?

Platinum and Pd-arsenides, antimonides, tellurides, bismuthinides, and sulfides are the major hosts of Pt and Pd in magmatic and hydrothermal Cu-Ni-sulfide ores. Textural relationships among such minerals in nature often provide contradictory messages about the mechanism and timing of their formation. To know how and when Pt and Pd mineral phases crystallize from sulfide-saturated liquids and how their compositions and textures evolve during cooling, we undertook controlled cooling experiments in evacuated silica tubes. A Cu-Ni-Fe sulfide mixture, similar in composition to the average Merensky Reef sulfide magma, was charged (in a 9:1 wt.% proportion) with one of the PtAs2, PtTe2, PtSb2, PtBi2, PdAs2, PdTe2, PdSb, and PdBi2 compounds, heated to 1,100°C, and slowly cooled (15°C/day) to room temperature. The run products were sampled at 950°C, 750°C, and 25°C by quenching the silica tubes in water. The results show that Pt formed stable phases with As, Te, and Sb above 950°C and with Bi and S below 750°C. The Pt phases were found mostly in the decomposed intermediate solid solution (ISS), and all the phases survived to 25°C with no compositional changes. At 950°C, Pd formed arsenide, telluride, and antimonide immiscible melts that coexisted with monosulfide solid solution (MSS) and sulfide melt. The composition of the Pd-semimetal melt droplets changed during cooling by equilibration with the host sulfide. Palladium mineral phases formed at temperatures below 750°C directly from the immiscible semimetal-rich melts where they kept the rounded shapes of the melt droplets. Ni-sulfarsenides preceded the formation of Pd arsenides. No Ni tellurides, antimonides, or bismuthinides formed in any of the systems, implying that their formation requires higher semimetal/Pt + Pd ratios. The decomposition of MSS and ISS to base metal sulfides led to significant textural changes in Pt and Pd mineral grains. The compositions of Pt and Pd phases are inherited from the magmatic stage, and their textures are low-temperature (&amp;lt;450°C) features.

Controls on the metal tenors of sulfide ores in the Jinchuan Ni–Cu–PGE sulfide deposit, NW China: Implications for the formation of distinct textural types of sulfide ores in magma conduits

The giant Jinchuan Ni–Cu–platinum-group element (PGE) sulfide deposit is a magma conduit system comprising four main intrusive units termed segments III, I, II-W, and II-E. The deposit comprises disseminated, net-textured, massive sulfide, and Cu-rich sulfide ores, with variations in metal tenors occurring among these different ore types and among the segments. Controls on these metal tenor variations must be linked to metallogenic processes, but this remains poorly constrained. To asses this, we systematically compared metal tenors (Ni, Cu, and the PGE) of ores from two perspectives — i) different ore types in each segment and ii) a single ore type across all four segments. Two major styles of metal tenor variations are documented. Style 1: Segments III and I have higher metal tenors than segments II-W and II-E for any given type of ore. Based on sulfide segregation models, this variation is interpreted to be related to variable degrees of early removal of sulfide liquid from the magmas that formed the four segments. Style 2: Disseminated ores in segments III and I have higher metal tenors than the other ore types, whereas all of the ore types in segments II-W and II-E have similar metal tenors. This is interpreted to be the result of the disseminated ores in segments III and I having formed from sulfide liquids that experienced higher R factors than the sulfide liquids that formed the other ore types, whereas all of the ores in segments II-W and II-E formed from sulfide liquids that experienced similar R factors. This difference suggests that the different ore types in segments III and I formed via early percolation and accumulation of sulfide liquids (the net-textured and massive ores) followed by the capture of disseminated, high R factor sulfides (the disseminated ore), whereas the different ore types in segments II-W and II-E likely formed by the physical percolation of originally disseminated sulfide liquid through the inter-crystal pore space. This study demonstrates that both sulfide ore texture and their metal-tenor variations are critical to characterizing ore-forming processes in dynamic magma conduits.

Caught in the moment: interaction of immiscible carbonate and sulfide liquids in mafic silicate magma—insights from the Rudniy intrusion (NW Mongolia)

The Devonian Rudniy intrusion is a composite magmatic body comprising two gabbroid units. Located in the Tsagaan-Shuvuut ridge in NW Mongolia, it is the only one known to contain disseminated sulfide Ni-Cu-PGE minerals out of numerous gabbroid intrusions surrounding the Tuva depression. The ore occurs as disseminated sulfide globules made of pyrrhotite, pentlandite, chalcopyrite, and cubanite, confined to a narrow troctolitic layer at the margins of a melanogabbro, at the contact with a previously emplaced leucogabbro. Globules generally display mantle-dominated sulfur isotopic signatures but show variable metallogenic and mineralogical characteristics, as well as notably different sizes and morphologies reflecting variable cooling and crystallization regimes in different parts of the intrusion. Sulfides from the chilled margin of the melanogabbro are surrounded and intergrown with volatile-rich (i.e., CO2-, H2O-, F-, and Cl) phases such as calcite, chlorite, mica, amphibole, and apatite. Based on the mineralogical and textural relationships of volatile-rich phases with sulfides, we argue that this assemblage represents the product of the crystallization of volatile-rich carbonate melt immiscible with both silicate and sulfide liquids. We put forward the hypothesis that volatile-rich carbonate melt envelops sulfide droplets facilitating their transport in magmatic conduits and that this process may be more widespread than commonly thought. The smaller sulfide globules, which are interpreted to derive from the breakup of larger globules during transport and emplacement, do not display an association with volatile-rich phases, suggesting that the original carbonate melt could have been detached from them during the evolution of the magmatic system. Variable rates of crystallization may have been responsible for the observed disparities in the mineralogical and metallogenic characteristics of different sulfide globules entrained in the Rudniy intrusion.

Sources of Cu-Rich Sulfide Mineralization and high-Ni Olivine of the Rudnaya Dyke (Imangda Junction, Norilsk Region): Based on Compositional, Isotope and Model Data

The Rudnaya dyke of the Imangda ore junction is composed of the weakly differentiated olivine-bearing to olivine gabbrodolerites with sulfide globules and disseminated sulfides of (pentlandite-pyrrhotite)-chalcopyrite-cubanite composition. Along with cogenetic sulfide mineralization, dyke’s gabbrodolerites contain xenoliths of hornfelsed basalts, abundant amygdales and rare grains of zoned Ol-1 Fo90-47 with 0.5–0.06 wt % NiO that coexist with subhedral olivine Fo74-36 of the second generation. Modeling in the COMAGMAT and alphaMELTS programs showed that high-Mg olivine 1 with Cr-spinel inclusions could not be crystallized from a Fe-enriched tholeiitic magma that is parental for the dyke with 4.8–7.3 wt % MgO and 11.6–16.7 wt % total Fe2O3. The trend of variations and high Ni up to 0.5 wt. % in the cores of xenocrystic olivine Fo90-76 in contrast to maximum Fo83 and 0.4 wt. % NiO in olivine from the ore-bearing intrusions and picritic basalts of the Norilsk region point toward the presence of picritic cumulates, which magma had not exchanged with sulfide liquid. Platinum group element (PGE) abundances increase (up to 2.2 ppm) with Cu/Ni in the whole rocks as well as with proportions of pentlandite in a sulfide association. A specific chalcophile metal distribution, which is characterized by Ni, Os and Ir minima, elevated Cu/Ni (5–15) and Cu/Pd (3200–10 900) as well as lower both PGE tenor of sulfides (2–65 ppm) and Pd content in pentlandite (175 ppm) compared to typical of ore-bearing intrusions, suggests that Cu-rich sulfide mineralization was not mechanically captured from highly fractionated sulfide fractions of ore-bearing magmas but is cogenetic with a magma of the dyke. Sulfide saturation, near-simultaneous with fluid saturation and degassing, was achieved due to assimilation of sedimentary sulfur and volatiles from Devonian evaporites in the dyke conduit that is supported by the heavy S isotope composition of dyke’s sulfides with the average δ34S = 14.7 ±1.1‰ (n = 31), close to the values in sulfides from the endocontact zones of the ore-bearing Imangda intrusions hosted by Devonian strata. The initial isotopic characteristics of dyke’s rocks (Sri 0.70517–0.70532, ɛNd from –0.4 to 0.8) imply its comagmatic origin with the Norilsk-type intrusions whereas the overall data do not exclude even its spatial connection with an upper crustal conduit system of the ore-bearing magmas.

Mineralogy and geochemistry of magnetite in the Zhdanov Ni-Cu-(PGE) deposit in the Pechenga ore field, Russia: Implications for the formation of magmatic sulfide ores

The mineralogy and chemical composition of magnetite and chromite series (simplified as magnetite) can provide valuable insights into the formation processes of magmatic Ni-Cu-(PGE) sulfide deposits. Previous studies mainly focus on magnetite in disseminated ores and massive ores, but very little is known about the magnetite in net-textured ores. In this study, magnetite in net-textured ores (type 1 magnetite) and massive ores (type 2 magnetite) from the Zhdanov Ni-Cu-(PGE) deposit in the Pechenga ore field, were recognized and analyzed using scanning electron microscope (SEM), electron probe microanalysis (EPMA) and laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS). Both the type 1 and type 2 magnetite grains show zoned textures with Cr concentration decreasing from the core to the rim. Type 1 magnetite has higher Al and Mg concentrations than type 2 magnetite. These observations indicate that type 1 and type 2 magnetite crystallized from and record the solidification process of silicate melt and sulfide liquid, respectively. Type 1 magnetite within sulfides of net-textured ores has identical chemical composition to that within silicates, which suggests that the chemical composition of magnetite is not significantly affected by sub-solidus re-equilibrium with sulfide minerals. It also suggests that the type 1 magnetite within sulfides was incorporated into sulfide liquid later during the downward percolation of sulfide liquid through the magnetite-bearing olivine crystal mush. On the other hand, type 2 magnetite has comparable concentrations of W, Sc, Ga, Cr, Mo, and Mn to the type 1 magnetite. Such compositional similarity can be explained by the crystallization of type 2 magnetite from the sulfide liquid pool that have been mingled with the downward percolated sulfide liquid. Accordingly, the downward percolation of sulfide liquid plays an important role in the formation of net-textured ores and massive ores in the Zhdanov deposit.