Suction Feeding Research Articles

Insights into the feeding behaviors and biomechanics of Varroa destructor mites on honey bee pupae using electropenetrography and histology

Feeding behaviors and biomechanics of female Varroa destructor mites are revealed from AC-DC electropenetrography (EPG) recordings of mites feeding from Apis mellifera honey bee pupae and histology of mite internal ingestion apparatus. EPG signals characteristic of arthropod suction feeding (ingestion) were identified for mites that fed on pupae during overnight recordings. Ingestion by these mites was confirmed afterwards by observing internally fluorescent microbeads previously injected into their hosts. Micrographs of internal ingestion apparatus illustrate the connection between a gnathosomal tube and a pharyngeal lumen, which is surrounded by alternating dilator and constrictor muscles. Inspection of EPG signals showed the muscularized mite pharyngeal pump operates at a mean repetition rate of 4.5 cycles/s to ingest host fluids. Separate feeding events observed for mites numbered between 23 and 33 over approximately 16 h of recording, with each event lasting ~10 s. Feeding events were each separated by ~2 min. Consecutive feeding events separated by either locomotion or prolonged periods of quiescence were grouped into feeding bouts, which ranged in number from one to six. Statistical analyses of EPG data revealed that feeding events were prolonged for mites having lower pharyngeal pump frequencies, and mites having prolonged feeding events went unfed for significantly more time between feeding events. These results suggest that mites may adjust behaviors to meet limitations of their feeding apparatus to acquire similar amounts of food. Data reported here help to provide a more robust view of Varroa mite feeding than those previously reported and are both reminiscent of, as well as distinct from, some other acarines and fluid-feeding insects.

Hydrodynamics of the bladderwort feeding strike.

The aquatic bladderwort Utricularia gibba captures zooplankton in mechanically triggered underwater traps. With characteristic dimensions <1 mm, the trapping structures are among the smallest known that work by suction-a mechanism that would not be effective in the creeping-flow regime. To understand the adaptations that make suction feeding possible on this small scale, we have measured internal flow speeds during artificially triggered feeding strikes in the absence of prey. These data are compared with complementary analytical models of the suction event: an inviscid model of the jet development in time and a steady-state model incorporating friction. The initial dynamics are well described by a time-dependent Bernoulli equation in which the action of the trap door is represented by a step increase in driving pressure. According to this model, the observed maximum flow speed (5.2 m/s) depends only on the pressure difference, whereas the initial acceleration (3 × 104 m/s2 ) is determined by pressure difference and channel length. Because the terminal speed is achieved quickly (~0.2 ms) and the channel is short, the remainder of the suction event (~2.0 ms) is effectively an undeveloped viscous steady state. The steady-state model predicts that only 17% of power is lost to friction. The energy efficiency and steady-state fluid speed decrease rapidly with decreasing channel diameter, setting a lower limit on practical bladderwort size.

High-performance suction feeding in an early elasmobranch.

High-performance suction feeding is often presented as a classic innovation of ray-finned fishes, likely contributing to their remarkable evolutionary success, whereas sharks, with seemingly less sophisticated jaws, are generally portrayed as morphologically conservative throughout their history. Here, using a combination of computational modeling, physical modeling, and quantitative three-dimensional motion simulation, we analyze the cranial skeleton of one of the earliest known stem elasmobranchs, Tristychius arcuatus from the Middle Mississippian of Scotland. The feeding apparatus is revealed as highly derived, capable of substantial oral expansion, and with clear potential for high-performance suction feeding some 50 million years before the earliest osteichthyan equivalent. This exceptional jaw performance is not apparent from standard measures of ecomorphospace using two-dimensional data. Tristychius signals the emergence of entirely new chondrichthyan ecomorphologies in the aftermath of the end-Devonian extinction and highlights sharks as significant innovators in the early radiation of the modern vertebrate biota.

Thermodynamics of the Bladderwort Feeding Strike—Suction Power from Elastic Energy Storage

The carnivorous plant bladderwort exemplifies the use of accumulated elastic energy to power motion: respiration-driven pumps slowly load the walls of its suction traps with elastic energy (∼1 h). During a feeding strike, this energy is released suddenly to accelerate water (∼1 ms). However, due to the traps' small size and concomitant low Reynolds number, a significant fraction of the stored energy may be dissipated as viscous friction. Such losses and the mechanical reversibility of Stokes flow are thought to degrade the feeding success of other suction feeders in this size range, such as larval fish. In contrast, triggered bladderwort traps are generally successful. By mapping the energy budget of a bladderwort feeding strike, we illustrate how this smallest of suction feeders can perform like an adult fish.

Same but different: aquatic prey capture in paedomorphic and metamorphic Alpine newts

Paedomorphosis describes the retention of larval characters in adult stages and is widespread amongst salamanders. Salamandrid newts exhibit facultative paedomorphosis, where paedomorphic and metamorphic adult forms coexist in the same population. Previous studies have shown that prey capture kinematics do not differ between paedomorphic and metamorphosed ambystomatid salamanders, despite diverging morphology and prey capture performance. It remained unclear, however, whether the stereotypy of prey capture kinematics across morphotypes is restricted to ambystomatids, or can be found in other salamander groups too. Here, we performed biplanar high-speed-recordings of the prey capture behavior in paedomorphic and metamorphic salamandrid newts and only found minor kinematic differences across morphotypes, suggesting that stereotypy across morphotypes is a more general feature within salamanders. We then compared anatomy of skull and hyobranchial skeleton, along with the physiological cross sectional area (PCSA) of the rectus cervicis muscle, the main muscle empowering suction feeding. Besides the overall morphological differences of the feeding apparatus, the PCSA of the rectus cervicis also differs significantly between morphotypes, being twice as large in paedomorphs. Accordingly, paedomorphs can exert more powerful suction strikes, which in turn may be one of the key factors why paedomorphs are more efficient in capturing elusive prey compared to metamorphs.

Diaphorocetus poucheti (Cetacea, Odontoceti, Physeteroidea) from Patagonia, Argentina: one of the earliest sperm whales

Sperm whales (Physeteroidea) are the basal-most surviving lineage of odontocetes, represented today by just three highly specialized, deep-diving suction feeders. By contrast, extinct sperm whales were relatively diverse, reflecting a major Miocene diversification into various suction feeding and macroraptorial forms. The beginnings of this diversification, however, remain poorly understood. The Atlantic coast of South America provides a crucial window into early physeteroid evolution and has yielded some of the oldest species known from cranial material, Idiorophus patagonicus and Diaphorocetus poucheti – both of which are in need of re-description and phylogenetic reappraisal. Here, we re-examine Diaphorocetus in detail and, in light of its complex taxonomic history, declare it a nomen protectum. Phylogenetically, the species forms part of a polytomy including ‘Aulophyseter’ rionegresis and the two crown lineages (Physeteridae and Kogiidae) and demonstrates that facial asymmetry and a clearly defined supracranial basin have characterized this lineage for at least 20 Ma. With a total body length of 3.5–4 m, Diaphorocetus is one of the smallest physeteroids yet known. Its cranial morphology hints at an intermediate raptorial/suction feeding strategy and it has a moderately developed spermaceti organ and junk.

Eggs sunny-side up: A new species of Olea, an unusual oophagous sea slug (Gastropoda: Heterobranchia: Sacoglossa), from the western Atlantic.

Nearly all of the recognized species of sea slugs in clade Sacoglossa (about 300 taxa) are herbivorous, using a uniseriate radula in suctorial feeding. The only exceptions are a pair of monotypic genera in the ceratiform family Limapontiidae: Olea Agersborg, 1923 from the northeastern Pacific, and Calliopaea d'Orbigny, 1837 from the northeastern Atlantic coast of Europe and the Mediterranean. Both genera feed on the eggs of other heterobranchs, notably cephalaspideans, and lack cerata on the anterior dorsum. Major differences are that C. bellula d'Orbigny, 1837 has more cerata than O. hansineensis Agersborg, 1923, a more typical radula with ascending and descending rows of fully-formed teeth, and a much longer penial stylet. Here, we describe a new egg-eating sacoglossan species from the subtropical Gulf of Mexico coast of Florida, U.S.A. Phylogenetic relationships inferred from analyses of a four-gene dataset including 219 sacoglossan species indicated the new taxon (O. hensoni n. sp.) belongs to Olea. The generic placement of the new species is also supported by its highly reduced radula and comparatively short penial stylet. A full description of the reproductive, digestive, and nervous systems is also provided. Finding a new Olea species in the warm waters of the western Atlantic was surprising, given the genus was previously known only from the cold northern Pacific, and suggests further diversity in oophagous sacoglossans may await discovery.

The Evolutionary Dynamics of Mechanically Complex Systems

Animals use a diverse array of motion to feed, escape predators, and reproduce. Linking morphology, performance, and fitness is a foundational paradigm in organismal biology and evolution. Yet, the influence of mechanical relationships on evolutionary diversity remains unresolved. Here, I focus on the many-to-one mapping of form to function, a widespread, emergent property of many mechanical systems in nature, and discuss how mechanical redundancy influences the tempo and mode of phenotypic evolution. By supplying many possible morphological pathways for functional adaptation, many-to-one mapping can release morphology from selection on performance. Consequently, many-to-one mapping decouples morphological and functional diversification. In fish, for example, parallel morphological evolution is weaker for traits that contribute to mechanically redundant motions, like suction feeding performance, than for systems with one-to-one form–function relationships, like lower jaw lever ratios. As mechanical complexity increases, historical factors play a stronger role in shaping evolutionary trajectories. Many-to-one mapping, however, does not always result in equal freedom of morphological evolution. The kinematics of complex systems can often be reduced to variation in a few traits of high mechanical effect. In various different four-bar linkage systems, for example, mechanical output (kinematic transmission) is highly sensitive to size variation in one or two links, and insensitive to variation in the others. In four-bar linkage systems, faster rates of evolution are biased to traits of high mechanical effect. Mechanical sensitivity also results in stronger parallel evolution—evolutionary transitions in mechanical output are coupled with transition in linkages of high mechanical effect. In other words, the evolutionary dynamics of complex systems can actually approximate that of simpler, one-to-one systems when mechanical sensitivity is strong. When examined in a macroevolutionary framework, the same mechanical system may experience distinct selective pressures in different groups of organisms. For example, performance tradeoffs are stronger for organisms that use the same mechanical structure for more functions. In general, stronger performance tradeoffs result in less phenotypic diversity in the system and, sometimes, a slower rate of evolution. These macroevolutionary trends can contribute to unevenness in functional and lineage diversity across the tree of life. Finally, I discuss how the evolution of mechanical systems informs our understanding of the relative roles of determinism and contingency in evolution.

Look into a fish mouth: 3D X-ray particle tracking adapted to intra-oral hydrodynamics in fish feeding

Most of ray-finned fish (Actinopterygii) use suction feeding to capture their prey. The rapid expansion of their mouth generates a high velocity water flow (e.g. Muller and Osse 1984), which leads ...

A new species and biology of the Late Cretaceous 'blunt-snouted' bony fish, Thryptodus (Actinopterygii: Tselfatiiformes), from the United States

Thryptodus zitteli Loomis (Actinopterygii: Tselfatiiformes) is an enigmatic Late Cretaceous bony fish with a massive blunt rostrum that lived in the Western Interior Seaway of North America. Here, a second species of Thryptodus, T. loomisi sp. nov., is described on the basis of two skulls and some isolated rostra from the Britton Formation (Cenomanian–lower Turonian) of Texas, USA. In addition, the type species, T. zitteli, is redescribed and a nearly complete skeleton of the species from the Austin Chalk of Texas is examined to further decipher the biology of Thryptodus. Thryptodus primarily lived in offshore environments and reached up to about 1.8 m in total length. With a massive head, the fossil fish had a dorsal fin that spanned much of the body length, elongate pectoral, pelvic, and anal fins, and a small forked caudal fin, suggesting that Thryptodus was a sluggish swimmer. The function of the peculiar blunt rostrum in Thryptodus remains uncertain. Likewise, the exact diet of Thryptodus remains unknown. However, the skull construct suggests that Thryptodus had powerful lower jaws and hyoid-based suction feeding.

What Fish Can Teach Us about the Feeding Functions of Postcranial Muscles and Joints.

Studies of vertebrate feeding have predominantly focused on the bones and muscles of the head, not the body. Yet, postcranial musculoskeletal structures like the spine and pectoral girdle are anatomically linked to the head, and may also have mechanical connections through which they can contribute to feeding. The feeding roles of postcranial structures have been best studied in ray-finned fishes, where the body muscles, vertebral column, and pectoral girdle attach directly to the head and help expand the mouth during suction feeding. Therefore, I use the anatomy and motion of the head-body interface in these fishes to develop a mechanical framework for studying postcranial functions during feeding. In fish the head and body are linked by the vertebral column, the pectoral girdle, and the body muscles that actuate these skeletal systems. The morphology of the joints and muscles of the cranio-vertebral and hyo-pectoral interfaces may determine the mobility of the head relative to the body, and ultimately the role of these interfaces during feeding. The postcranial interfaces can function as anchors during feeding: the body muscles and joints minimize motion between the head and body to stabilize the head or transmit forces from the body. Alternatively, the postcranial interfaces can be motors: body muscles actuate motion between the head and body to generate power for feeding motions. The motor function is likely important for many suction-feeding fishes, while the anchor function may be key for bite- or ram-feeding fishes. This framework can be used to examine the role of the postcranial interface in other vertebrate groups, and how that role changes (or not) with morphology and feeding behaviors. Such studies can expand our understanding of muscle function, as well as the evolution of vertebrate feeding behaviors across major transitions such as the invasion of land and the emergence of jaws.

Functional coupling in the evolution of suction feeding and gill ventilation of sculpins (Perciformes: Cottoidei).

Suction feeding and gill ventilation in teleosts are functionally coupled, meaning that there is an overlap in the structures involved with both functions. Functional coupling is one type of morphological integration, a term that broadly refers to any covariation, correlation, or coordination among structures. Suction feeding and gill ventilation exhibit other types of morphological integration, including functional coordination (a tendency of structures to work together to perform a function) and evolutionary integration (a tendency of structures to covary in size or shape across evolutionary history). Functional coupling, functional coordination, and evolutionary integration have each been proposed to limit morphological diversification to some extent. Yet teleosts show extraordinary cranial diversity, suggesting that there are mechanisms within some teleost clades that promote morphological diversification, even within the highly integrated suction feeding and gill ventilatory systems. To investigate this, we quantified evolutionary integration among four mechanical units associated with suction feeding and gill ventilation in a diverse clade of benthic, primarily suction-feeding fishes (Cottoidei; sculpins and relatives). We reconstructed cottoid phylogeny using molecular data from 108 species, and obtained 24 linear measurements of four mechanical units (jaws, hyoid, opercular bones, and branchiostegal rays) from micro-CT reconstructions of 44 cottoids and 1 outgroup taxon. We tested for evolutionary correlation and covariation among the four mechanical units using phylogenetically corrected principal component analysis to reduce the dimensionality of measurements for each unit, followed by correlating phylogenetically independent contrasts and computing phylogenetic generalized least squares models from the first principle component axis of each of the four mechanical units. The jaws, opercular bones, and branchiostegal rays show evolutionary integration, but the hyoid is not positively integrated with these units. To examine these results in an ecomorphological context, we used published ecological data in phylogenetic ANOVA models to demonstrate that the jaw is larger in fishes that eat elusive or grasping prey (e.g., prey that can easily escape or cling to the substrate) and that the hyoid is smaller in intertidal and hypoxia-tolerant sculpins. Within Cottoidei, the relatively independent evolution of the hyoid likely has reduced limitations on morphological evolution within the highly morphologically integrated suction feeding and gill ventilatory systems.

†Cretohlezkus gen. nov. from Upper Cretaceous Burmese amber demonstrates ancient origins of suctorial mouthparts in Eucinetidae (Coleoptera: Scirtoidea)

Eucinetidae is a small beetle family comprising only ten extant genera. Five of them have unusually modified mouthparts with a strongly transformed labium, which shows features interpreted as adaptations to suctorial feeding. Among the hyperdiverse Coleoptera, similar feeding adaptations are known only in several genera of Cerylonidae and Leiodidae. Fossils attributed to Eucinetidae or representing taxa presumably closely related to eucinetids are known from Lower Cretaceous of China and Upper Jurassic of Mongolia, but none of them shows modified mouthparts. The first fossil of a ‘suctorial eucinetid’, †Cretohlezkus alleni gen. et sp. nov., is reported in the present paper, based on a well-preserved specimen in Cenomanian Burmese amber. A preliminary phylogenetic analysis placed †Cretohlezkus near base of the monophyletic ‘suctorial eucinetid’ lineage, but branch support was too low to present a robust evolutionary hypothesis. The prementum of †Cretohlezkus is modified as strongly as that of extant members of this group, demonstrating early origins of still only speculative feeding habits of the ‘suctorial eucinetids’, which presumably use Myxomycetes or Basidiomycetes as the source of food.

Skeletal kinematics of the hyoid arch in the suction-feeding shark Chiloscyllium plagiosum.

White-spotted bamboo sharks, Chiloscyllium plagiosum, generate strong suction-feeding pressures that rival the highest levels measured in ray-finned fishes. However, the hyostylic jaw suspension of these sharks is fundamentally different from the actinopterygian mechanism, including more mobile hyomandibulae, with the jaws and ceratohyal suspended from the hyomandibulae. Prior studies have proposed skeletal kinematics during feeding in orectolobid sharks from indirect measurements. Here, we tested these hypotheses using XROMM to measure cartilage motions directly. In agreement with prior hypotheses, we found extremely large retraction and depression of the ceratohyal, facilitated by large protraction and depression of the hyomandibula. Somewhat unexpectedly, XROMM also showed tremendous long-axis rotation (LAR) of both the ceratohyal and hyomandibula. This LAR likely increases the range of motion for the hyoid arch by keeping the elements properly articulated through their large arcs of motion. XROMM also confirmed that upper jaw protraction occurs before peak gape, similarly to actinopterygian suction feeders, but different from most other sharks in which jaw protrusion serves primarily to close the mouth. Early jaw protraction results from decoupling the rotations of the hyomandibula, with much of protraction occurring before peak gape with the other rotations lagging behind. In addition, the magnitudes of retraction and protraction of the hyoid elements are independent of the magnitude of depression, varying the shape of the mouth among feeding strikes. Hence, the large variation in suction-feeding behavior and performance may contribute to the wide dietary breadth of bamboo sharks.

Hawaiian monk seals exhibit behavioral flexibility when targeting prey of different size and shape.

Animals use diverse feeding strategies to capture and consume prey, with many species switching between strategies to accommodate different prey. Many marine animals exhibit behavioral flexibility when feeding to deal with spatial and temporal heterogeneity in prey resources. However, little is known about flexibility in the feeding behavior of many large marine predators. Here, we documented the feeding behavior and kinematics of the endangered Hawaiian monk seal (Neomonachus schauinslandi, n=7) through controlled feeding trials. Seals were fed multiple prey types (e.g. night smelt, capelin, squid and herring) that varied in size and shape to examine behavioral flexibility in feeding. Hawaiian monk seals primarily used suction feeding (91% of all feeding trials) across all prey types, but biting, specifically pierce feeding, was also observed (9% of all feeding trials). Suction feeding was characterized by shorter temporal events, a smaller maximum gape and gape angle, and a fewer number of jaw motions than pierce feeding; suction feeding kinematic performance was also more variable compared with pierce feeding. Seals showed behavioral flexibility in their use of the two strategies. Suction feeding was used most frequently when targeting small to medium sized prey and biting was used with increasing frequency on larger prey. The feeding kinematics differed between feeding strategies and prey types, showing that Hawaiian monk seals adjusted their behaviors to particular feeding contexts. Hawaiian monk seals are opportunistic marine predators and their ability to adapt their feeding strategy and behavior to specific foraging scenarios allows them to target diverse prey resources.

The interaction between suction feeding performance and prey escape response determines feeding success in larval fish.

The survival of larval marine fishes during early development depends on their ability to feed before depleting their yolk reserves. Most larval fish capture prey by expanding their mouth, generating a 'suction flow' that draws the prey into it. These larvae dwell in a hydrodynamic environment that impedes their ability to capture even non-evasive prey; however, the marine environment is characterized by an abundance of evasive prey, predominantly copepods. Copepods sense the hydrodynamic disturbance created by approaching predators and perform high-acceleration escape maneuvers. Using a 3D high-speed video system, we characterized the interaction between Sparus aurata larvae and prey from a natural zooplankton assemblage that contained evasive prey, and assessed the factors that determine the outcome of these interactions. At 8-33 days post hatching, larvae preferentially attacked large prey that was moving prior to the initialization of the strike; however, feeding success was lower for larger, more evasive prey. Thus, larvae were challenged in capturing their preferred prey. Larval feeding success increased with increasing Reynolds numbers, but decreased sharply when the prey performed an escape maneuver. The kinematics of successful strikes resulted in a shorter response time but higher hydrodynamic signature available for the prey, suggesting that strike success in our experiments was determined by brevity rather than stealth: executing a fast strike eliminated a potential escape response by the prey. Our observations of prey selectivity reveal that larval performance, rather than preferences, determines their diet during early development.

Underactuated Gripper Mechanism: Function Extraction of Suction Feeding

Underactuated Gripper Mechanism: Function Extraction of Suction Feeding

The evolution of feeding strategies in phocid seals (Pinnipedia, Phocidae)

ABSTRACTAdaptations for feeding underwater were crucial to the success of pinnipeds (seals, sea lions, and walruses) in their transition from terrestrial to aquatic habitats. Extant phocids (true seals) use multiple feeding strategies—biting, filter, and suction feeding—to capture and consume prey, and each strategy is associated with cranial, mandibular, and dental adaptations. However, little is known about feeding strategies in stem pinnipeds. The objectives of this study were to investigate feeding strategies used by some extinct pinnipeds based on cranial and mandibular morphologies and use this framework to examine the evolution of phocid feeding strategies. Three-dimensional cranial and mandibular landmark data were collected from 249 extant and fossil pinnipeds. Principal component analysis and canonical variate analysis were performed to describe the major axes of variation and compare overlap of fossil and extant taxa in morphospace. Stem pinnipeds had morphologies associated with biting and filter feeding. Several fossil taxa were most similar to extant biters, suggesting that biting was a common and important feeding strategy for early phocids. One fossil taxon, Homiphoca capensis, was potentially a filter feeder, because it consistently overlapped with extant filter feeders in cranial morphospace. No fossil taxa had morphological adaptations for suction feeding, indicating that suction feeding is a more derived strategy in phocids. Extant phocids and their ancestors have cranial and mandibular adaptations for multiple feeding strategies, which allowed these animals to move into diverse aquatic niches and likely contributed to their successful transition from terrestrial to aquatic ecosystems.

Transfer Die Technology Application for Efficiency Auto Part Production

Transfer die technology application for efficiency auto part production analysis of feedermechanism and efficiency of highly precision die design of transfer dies were applied by the feedermechanism system and work feed by pneumatic suction feed mechanism for transfer the workpieceto next station. This workpiece is panel sill and it’s a galvanized grade JAC 270C-35 and 1.4 mm ofthickness. After experimented with a finite element, it was found that the work piece able tostamping without causing damage to the workpiece. Then it’s taken into the die design processfollow by step. Therefore, participation start to create a die as highly precisions progressive die andexamined by stamping workpiece according to the customer requirement. It had found out thatwhen we first’s try out the result are similar valid to the design by made tiny adjustment over thedie. The inspection results of workpiece, according to the drawing design. Obviously, the size andborder of workpiece inspection was acceptable and in order to the result. It able conclude out. As aresult, the company can reduce time, reduce cost and mitigate the risk of error in the actual seriesproduction dies.

Angling-induced injuries have a negative impact on suction feeding performance and hydrodynamics in marine shiner perch, Cymatogaster aggregata.

Fishing is a popular and lucrative sport around the world and, in some cases, may contribute to declining fish stocks. To mediate this problem and maintain fish biomass in aquatic ecosystems, catch-and-release fishing, whereby a fish is caught and immediately released, has been implemented in many countries. It is unclear whether the injuries to the mouth that are caused by the hook have an impact on feeding performance of fishes. Using high-speed video and computational fluid dynamics (CFD), we asked whether injuries around the mouth caused by fishing hooks have a negative impact on suction feeding performance (measured as maximum prey velocity) of the commonly angled marine shiner perch (Cymatogaster aggregata). We hypothesized that fish with mouth injuries would exhibit decreased feeding performance compared with controls. Ten shiner perch were caught using scientific angling and 10 were caught using a seine net. Feeding events were then recorded at 500 frames per second using a high-speed camera. Compared with the control group, maximum prey velocity was significantly lower in the injured group (P<0.01). Maximum gape, time to peak gape, maximum jaw protrusion and predator-prey distance were comparable between the control and injured groups, leading us to conclude that the injury-induced hole in the buccal cavity wall reduced the pressure gradient during mouth expansion, thereby reducing the velocity of water entering the fish's mouth. This was confirmed with our CFD modelling. Fishing injuries in nature are likely to depress feeding performance of fish after they have been released, although it is currently unclear whether this has a significant impact on survival.