Subtrochanteric Osteotomy Research Articles

Les pivots coniques avec traitement de surface sur le 1/3 proximal ont un taux de complication plus élevé que les pivots cylindriques avec traitement de surface sur les 2/3 proximaux en arthroplastie primaire pour luxation congénitale avec ostéotomie fémorale de raccourcissement

BackgroundThe results of cementless stems in total hip arthroplasty (THA) done because of congenital dislocation with step-cut osteotomy is not well known, particularly the influence of the design and the role of extent of porous coating. Therefore, we performed a retrospective study to evaluate the mid- to long-term results THA performed with a single type acetabular component and different geometry and fixation type stems with ceramic bearings in the setting of step-cut subtrochanteric osteotomy in high hip dislocated (HHD) patients. We asked if the stem type affect the outcomes in terms of (1) intra- and postoperative complication rates, (2) radiographic outcomes, (3) prosthesis survival in step-cut subtrochanteric shortening osteotomy. HypothesisThe type of the stem, whether cylindrical or tapered does not affect the outcome if the femoral canal fit and fill is obtained and the step-cut femoral shortening osteotomy is primarily fixed. Materials and methodsForty-five hips in 35 patients with a mean follow-up of 10 years (range, 7–14 years) were evaluated. The single type cementless cup was placed at the level of the true acetabulum, a step-cut shortening femoral osteotomy was performed and reconstruction was performed with two different types of tapered stem in twenty-two hips (Synergy™ and Image™ proximally coated, Smith and Nephew, Menphis, TN, USA) and one type of cylindrical stem (Echelon™ with 2/3 coated, Smith and Nephew, Menphis, TN, USA) in twenty-three hips. Harris hip scores (HHS) and a University of California Los Angeles (UCLA) activity scores were calculated for all patients and successive X-rays were evaluated regarding component loosening and osteolysis, along with complications related to bearing, step-cut osteotomy and stem types. ResultsForty-one hips (91%) had good and excellent clinical outcome according to HHS. The mean UCLA activity scores improved from 3.2±0.6 points (range, 2–4) preoperatively to 6.3 points±0.5 (range, 5–7) at the latest follow-up. The mean femoral shortening was 36±10mm (range, 20–65mm). Four (9%) dislocations were observed. There were five (11%) intraoperative femoral fractures and three (7%) cases of nonunion, which were observed in tapered stems. Cylindrical stems had superior neutral alignment primarily. With any stem revision as the end point, cylindrical stems had a higher survival rate (100%) than all tapered stems (82%; 95% confident interval [CI] 77%–97%) at ten years. With any revision as the end point, the 10-year survival rate for acetabular component (Reflection-Ceramic Interfit) and for femoral components were 98% (95% CI, 85%–99%) and 91% (95% CI, 78%–97%), respectively. ConclusionsThere were more implant related complications in HHD patients undergoing THA when tapered stems with 1/3 proximal coating were used to reconstruct a step-cut osteotomized femur, compared to cylindrical stems 2/3 coated. Level of evidenceIV, retrospective study.

Abnormal femoral antetorsion-a subtrochanteric deformity.

Femoral rotational malalignment is associated with pain and functional disability and may be a contributing factor to hip impingement as well as to instability. In general, the deformity can be addressed surgically by rotational osteotomy. However, the anatomic location of the deformity is debated. The goal of the present study was to narrow down the anatomic site of deformity using the lesser trochanter (LT) as an additional landmark. One hundred and eight patients underwent computer tomography (CT)-based rotational analysis of their lower extremities. Femoral torsion (FT) and LT torsion (LTT) were measured. The combined angle (CoA) between FT and LTT was calculated. Statistical evaluation was done by multiple regression analysis. Ninety-seven extremities were examined for FT and LTT. Average age was 41 years (SD = 16.9) with a range of 18–85 years. Mean values were 20° for FT (SD = 12.2) and −16° for LTT (SD = 11.3). Mean CoA was 37.2 (SD = 8.7). Statistical analysis reveals a strong linear relationship between FT and LTT (y=31+0.74x) and a weaker relationship between FT and CoA (y=31+0.24x). This study identifies the LT as a reliable landmark and shows a strong linear relationship between the orientation of the LT and the overall torsion of the femur below and above the LT with about two-thirds of torsional changes occurring distal to it. These results provide a considerable indication for a subtrochanteric osteotomy to address correction of femoral rotational deformity at its anatomical origin. Level of Evidence: Level III, observational study.

Tapered stems one-third proximally coated have higher complication rates than cylindrical two-third coated stems in patients with high hip dislocation undergoing total hip arthroplasty with step-cut shortening osteotomy

BackgroundThe results of cementless stems in total hip arthroplasty (THA) done because of congenital dislocation with step-cut osteotomy is not well known, particularly the influence of the design and the role of extent of porous coating. Therefore we performed a retrospective study to evaluate the mid to long-term results THA performed with a single type acetabular component and different geometry and fixation type stems with ceramic bearings in the setting of step-cut subtrochanteric osteotomy in high hip dislocated (HHD) patients. We asked if the stem type affect the outcomes in terms of (1) intra and postoperative complication rates (2) radiographic outcomes (3) prosthesis survival in step-cut subtrochanteric shortening osteotomy. HypothesisThe type of the stem, whether cylindrical or tapered does not affect the outcome if the femoral canal fit and fill is obtained and the step-cut femoral shortening osteotomy is primarily fixed. Materials and methodsForty-five hips in 35 patients with a mean follow up of 10 years (range, 7–14 years) were evaluated. The single type cementless cup was placed at the level of the true acetabulum, a step-cut shortening femoral osteotomy was performed and reconstruction was performed with two different types of tapered stem in twenty-two hips (Synergy™ and Image™ proximally coated, Smith and Nephew, Menphis, TN, USA) and one type of cylindrical stem (Echelon™ with 2/3 coated, Smith and Nephew, Menphis, TN, USA) in twenty-three hips. Harris hip scores (HHS) and a University of California Los Angeles (UCLA) activity scores were calculated for all patients and successive X-rays were evaluated regarding component loosening and osteolysis, along with complications related to bearing, step-cut osteotomy and stem types. ResultsForty-one hips (91%) had good and excellent clinical outcome according to HHS. The mean UCLA activity scores improved from 3.2±0.6 points (range, 2–4) preoperatively to 6.3 points±0.5 (range, 5–7) at the latest follow-up. The mean femoral shortening was 36±10mm (range, 20–65mm). Four (9%) dislocations were observed. There were five (11%) intra-operative femoral fractures and three (7%) cases of non-union, which were observed in tapered stems. Cylindrical stems had superior neutral alignment primarily. With any stem revision as the end point, cylindrical stems had a higher survival rate (100%) than all tapered stems (82%; 95% confident interval [CI] 77–97%) at ten years. With any revision as the end point, the 10-year survival rate for acetabular component (Reflection-Ceramic Interfit) and for femoral components were 98% (95% CI, 85–99%) and 91% (95% CI, 78–97%), respectively. ConclusionsThere were more implant related complications in HHD patients undergoing THA when tapered stems with 1/3 proximal coating were used to reconstruct a step cut osteotomized femur, compared to cylindrical stems 2/3 coated. Level of evidenceIV, retrospective study.

Percutaneous Subtrochanteric Osteotomy for Painful Dislocated Hips in Patients With Cerebral Palsy.

Treatment of a painful, chronically dislocated hip in nonambulatory children with cerebral palsy (CP) is challenging and controversial. Although many surgical options have been described, there is limited information, including patient-centered outcomes, following treatment. The purpose of our study was to evaluate the effect of a percutaneous subtrochanteric valgus osteotomy (SVO) using external fixation (EF) on hip abduction, radiographic parameters, and quality of life (QOL) measures in such patients. Fifteen nonambulatory patients (8 male, 7 female) with CP with 19 chronically dislocated hips underwent SVO using EF and adductor tenotomy at an average age of 14.3 years (range, 10.7 to 26.8 y). Changes in hip abduction and radiographic angular correction following surgery were assessed. Caregivers completed 2 surveys detailing differences in the patient's QOL measures, including severity and duration of pain and ease of nursing care, and the modified Child Health Index of Life with Disabilities (CPCHILD). Caregivers of 11 patients completed both surveys at an average follow-up of 50 months (range, 17 to 119 mo) after fixator removal. There was improvement in pain, sitting tolerance, ease of transfers, and perineal care in the majority (9/11) of patients. The modified CPCHILD (possible score, 10 to 50) improved from 27.2 to 16.23 (P=0.05). Hip abduction improved from -7 degrees (range, -32 to 5 degrees) to 24 degrees (range, 0 to 40 degrees) (P<0.0001). The average valgus osteotomy correction was 48.2 degrees (range, 2.2 to 93.2 degrees). The pelvic femoral shaft angle improved from -15.2 degrees (range, -47.7 to 7.4 degrees) to 15.4 degrees (-44.3 to 44.6 degrees). There was some correlation of both, change in hip abduction (R=0.55) and osteotomy angle (R=0.60), with improvement in QOL measures. There were 3 major complications (20%) in 15 patients. On the basis of preliminary results, percutaneous SVO stabilized with EF improves QOL in the majority of nonambulatory CP patients despite untoward events and is a viable alternative to open osteotomy with internal fixation. More robust comparative studies are needed to further assess the optimal salvage technique in this patient population. Level IV.

Total hip replacement in dysplastic hip joint dislocation

Objective: to assess current approaches to hip joint (HJ) ar­throplasty with high dysplastic dislocation and to evaluate out­comes. Methods: we studied the literature on the problem of to­tal hip arthroplasty under conditions of dysplastic coxarthrosis (DC) Crowe III–IV type classification and results of treatment in 322 patients (126 (39.1 %) — DC type III, 4 (4.4 %) — IV), wth domestic arthroplasty modular system with two types of ta­pered legs and two «dysplastic» with a square profile. Results: the main problem of hip joint arthroplasty in patients with DC Crowe III–IV type — selection of the optimal method of the femo­ral head construction, setting the cup on implant bed in the acetabulum (AC), prevention of cardiovascular and neurological complications. The method of low intertrochanteric osteotomy, femoral neck used in 126 cases (90 %) during the arthroplasty and length of limb offset from 2.8 to 4.5 cm without complica­tions. In 11 patients cup set to AC into true bed after osteotomy T. Paavilainen. In 3 cases subtrochanteric osteotomy performed with partial resection of the bone segment from 4 to 5 cm. Posi­tive results were obtained in 94.6 % of patients. Conclusions: in patients with DC III–IV type for Srowe when shortening the limb to 4 cm, treatment can be performed on the level or over minor trochanter intertrochanteric osteotomy, the release AC zone and immobilization of the proximal femur that saves its metaphysis and HJ muscular balance. In the case of complete dislocation of the femoral head with dysplastic genesis and shortening of the limbs over than 4 cm we recommend shorten­ing osteotomy together with the restoration of anatomic center of rotation of the head implant, ie setting the cup to the anatomic bed of AC combined with bone grafting defect in AC and use inserts 10o and 20o shed for prevent dislocation of the implant.

Cementless Total Hip Arthroplasty Involving Trochanteric Osteotomy without Subtrochanteric Shortening for High Hip Dislocation.

BackgroundTotal hip arthroplasty with subtrochanteric shortening osteotomy is widely performed for high hip dislocation. However, suboptimal leg length discrepancy correction and nonunion of the osteotomy site remain concerns. Although total hip arthroplasty using trochanteric osteotomy without subtrochanteric osteotomy was introduced, cemented implants have been more commonly used than contemporary cementless implants in this procedure. We evaluated the long-term results of cementless total hip arthroplasty with trochanteric osteotomy without subtrochanteric osteotomy for high hip dislocation.MethodsFrom 1990 to 2002, 27 cementless total hip arthroplasties using trochanteric osteotomy without subtrochanteric osteotomy were performed in 26 patients with Crowe III or IV high hip dislocation and a mean age of 36.4 ± 12.9 years. Seven ceramic-on-ceramic, 8 ceramic-on-polyethylene, 10 metal-on-polyethylene, and 2 metal-on-metal bearings were inserted. Mean follow-up was 15.1 ± 3.7 years. We retrospectively reviewed medical records and radiographic data and evaluated the clinical and radiological results including the Harris hip score, implant survival, correction of leg length discrepancy, and occurrence of complications.ResultsThe mean Harris hip score and leg length discrepancy improved significantly from 73.3 to 94.9 points and from 4.3 cm to 1.0 cm, respectively. With revision for loosening set as the end point, implant survival rates at 10 and 15 years postoperatively were 96.0% and 90.9% for stems and 74.1% and 52.3% for cups. In 8 of 10 hips with the metal-on-polyethylene bearing and 4 of 8 hips with the ceramic-on-polyethylene bearing, revision surgery was performed for aseptic loosening. However, no revision was performed in hips with the ceramic-on-ceramic bearing or the metal-on-metal bearing. Implant survival was significantly different by the type of bearing surface. Two permanent neurologic complications occurred in patients with a limb lengthening over 3.5 cm.ConclusionsWith proper selection of the bearing surface coupled with adjustment of lengthening, cementless total hip arthroplasty using trochanteric osteotomy without subtrochanteric osteotomy might be a favorable treatment option for high hip dislocation.

Nerve Palsy after Total Hip Arthroplasty without Subtrochanteric Femoral Shortening Osteotomy for a Completely Dislocated Hip Joint.

Background: Neurological injuries are a rare but devastating complication after total hip arthroplasty (THA). The purpose of this study was to retrospectively determine the frequency of nerve palsy after THA without subtrochanteric femoral shortening osteotomy in patients with a completely dislocated hip joint without pseudo-articulation between the femoral head and iliac bone.Methods:Between October 1999 and September 2001, nine primary THAs were performed for patients with a completely dislocated hip joint. The limb lengths, neurological abnormalities, and the extent of their neurological recovery were evaluated. Three THAs were combined with subtrochanteric femoral shortening osteotomy, and six THAs were combined without subtrochanteric femoral shortening osteotomy.Results:The mean length of the operation was 4.8 cm (range, 3.0-6.5 cm). Sciatic nerve palsy developed in four of the nine patients after THA. None of the cases with sciatic nerve palsy were combined with subtrochanteric femoral shortening osteotomy. Three of four patients did not completely recover from sciatic nerve palsy.Conclusions:THA for patients with a completely dislocated hip was associated with a high risk of nerve palsy due to excessive limb lengthening; the potential for recovery from nerve palsy was observed to be poor. Subtrochanteric femoral shortening osteotomy should be used in combination with THA in patients with a completely dislocated hip.

Short term clinical outcome of total hip arthroplasty for the treatment of Crowe IV congenital dysplasia of the hip in adults

To evaluate the short term clinical effects and surgery methods of the total hip arthroplasty (THA)for the treatment of Crowe type IV congenital dysplasia of hip (CDH) in adults. From March 2013 to March 2015, 20 patients (20 hips) with Crowe type IV CDH in adults were underwent THA, including 4 males and 16 females, with an average age of 52 years old ranged from 32 to 68 years old. All the cementless acetabular cups were placed at the original anatomic location. S-ROM prosthesis was adopted together with subtrochanteric transverse osteotomy in femoral side. All the patients were evaluated by using the Modified Harris Hip Score. Radiographic evaluations were made preoperatively and during follow up. The incisions were healed by first intention. There was no hip dislocation events and venous thrombosis occurred. All patients were followed up for 8 to 60 months with an average of 38.1 months. Postoperative X ray films showed all acetabular prosthesis were in true acetabulum. No nonunion and loosening were found in all patients. Harris score at final follow up improved from preoperative 50.90±9.35 to postoperative 90.25±3.16. The difference was statistically significant (P<0.05). There were 1 patient with femoral split fracture, 1 patient with nerve injury, 1 patient with heterotopic ossification of Brooker I. The hip function of all patients was good, the pain was disappeared. THA with S-ROM prosthesis and subtrochanteric osteotomy is an effective method for the treatment of Crowe type IV CDH in adults. The recent clinical curative effect is satisfied.

Treatment of Crowe Type-IV Hip Dysplasia Using Cementless Total Hip Arthroplasty and Double Chevron Subtrochanteric Shortening Osteotomy: A 5- to 10-Year Follow-Up Study

BackgroundThe purpose of this study was to evaluate the functional and radiographic results of patients with Crowe type-IV hip dysplasia treated by cementless total hip arthroplasty and double chevron subtrochanteric osteotomy. MethodsFrom January 2000 to February 2006, cementless total hip arthroplasty with a double chevron subtrochanteric shortening osteotomy was performed on 18 patients (22 hips) with Crowe type-IV dysplasia. The acetabular cup was placed in the position of the anatomic hip center, and subtrochanteric femoral shortening osteotomy was performed with the use of a double chevron design. The clinical and radiographic outcomes were reviewed with a mean follow-up of 6.5 years (5-10 years). ResultsThe mean amount of femoral subtrochanteric shortening was 38 mm (25-60 mm). All osteotomy sites were healed by 3-6 months without complications. The mean Harris Hip Score improved significantly from 47 points (35-65 points) preoperatively to 88 points (75-97 points) at the final follow-up. The Trendelenburg sign was corrected from a positive preoperative status to a negative postoperative status in 12 of 22 hips. No acetabular and femoral components have loosened or required revision during the period of follow-up. ConclusionCementless total hip arthroplasty using double chevron subtrochanteric osteotomy allowed for restoration of anatomic hip center with safely functional limb lengthening, achieved correction of preoperative limp, and good functional and radiographic outcomes for 22 Crowe type-IV dislocation hips at the time of the 5- to 10-year follow-up.

Total hip arthroplasty with femoral subtrochanteric osteotomy after Schanz osteotomy.

Schanz osteotomy is one of the options for the management of hip instability caused by congenital or septic arthritis. Following Schanz osteotomy, there is risk of hip pain secondary to hip arthritis. It may be necessary to perform subtrochanteric femoral osteotomy in conjunction with total hip arthroplasty (THA). This study evaluates the outcomes and complications associated with THA. We performed 36 THA after Schanz osteotomy. Patients were divided into three groups: (1) successful Schanz osteotomy, (2) highly dislocated hip with contact between the femoral head and pelvis, and (3) completely dislocated hip without contact between the femur and pelvis. Clinical and radiological evaluations were completed for each group. In all three groups, hip function improved significantly (p<0.01). There were four types of complications: transient paralysis, femoral fracture, dislocation, and non-union. Complications occurred frequently in the completely dislocated hip group. Our study shows that acceptable results may be obtained from THA with subtrochanteric femoral osteotomy after Schanz osteotomy. However, this procedure is a technically demanding treatment option, and there were characteristic complications intra and after surgery. Therefore, surgeons should treat hip osteoarthritis after Schanz operation with utmost care, especially completely dislocated hip.

Total hip arthroplasty (S-ROM stem) and subtrochanteric osteotomy for Crowe type IV developmental dysplasia of the hip.

Background:Developmental dysplasia of the hip (DDH) in adults with severe pain and disability is best treated by total hip arthroplasty (THA). The purpose of this study was to retrospectively evaluate the outcomes of subtrochanteric shortening osteotomy combined with THA using S-ROM stem for those severe patients with a special focus on the effect of two shapes in the subtrochanteric osteotomy ends: Oblique and transverse.Materials and Methods:Twenty one cases with mean age of 43.6 years who met inclusion criteria and were operated between February 2007 and February 2012 were included in the study. Those cases had been divided into two groups (oblique vs. transverse) and all records between the two groups were analyzed.Results:The Harris hip score significantly improved from 30.6 (range 18–59) preoperatively to 91.2 (range 87–98) postoperatively by the latest followup. Complications including one deep venous thrombosis, one intraoperative fracture of femur and two dislocations occurred while they were addressed properly afterward. The oblique group showed significant advantages in operative time, union time and additional fixation in comparison with the transverse group.Conclusions:In the primary THA for the treatment of irreducible DDH, subtrochanteric oblique osteotomy combined with the freely-rotatable S-ROM stem provided favorable short term outcomes by affording both morphological and functional advantages.

Long-Term Results of Total Hip Arthroplasty With Shortening Subtrochanteric Osteotomy in Crowe IV Developmental Dysplasia

BackgroundNumerous series have documented short-term successes with cementless total hip arthroplasty (THA) and subtrochanteric shortening osteotomy for Crowe IV developmental dysplasia of the hip (DDH). However, data are lacking regarding long-term implant fixation and patient function. In this study, we aimed to evaluate the 10-year results of cementless THA with simultaneous subtrochanteric shortening osteotomy for Crowe IV DDH. MethodsWe retrospectively reviewed 28 consecutive primaries cementless THAs performed in 24 patients with Crowe IV DDH between 1992 and 2005. Evaluation was performed through Harris Hip Scores, physical examination, and radiographic analysis. ResultsAt mean follow-up 10 years, 5 hips were revised, and 3 patients had died leaving 20 hips for clinical analysis. Harris Hip Score was significantly improved compared to preoperative values (43 vs 87 P < .0001). The 10-year survivorship free from revision for aseptic loosening was 89%. Twenty-nine percent patients had an early complication, but these did not have long-term deleterious effects on the reconstruction, and there were no reoperations for any reason after 7 years. ConclusionsIn the longest series to date, cementless THA combined with a subtrochanteric femoral shortening osteotomy in patients with a high hip dislocation secondary to dysplasia was associated with high rates of successful implant fixation and stable clinical improvement.

Fixation of Intertrochanteric Valgus Osteotomy with T Plate in Treatment of Developmental Coxa Vara.

BackgroundAlthough the valgus subtrochanteric osteotomy is considered as a standard surgical treatment for coxa vara, there is no consensus on the optimal method of fixation and osteotomy technique. Fixation of the osteotomy has been achieved by various methods including external fixation and internal fixation with pins and cerclage and a variety of plates. The aim of this study is the evaluation of the results of developmental coxa treated by Y intertrochanteric valgus osteotomy fixed with a T-buttress plate compared with other methods of fixation in the literature.MethodsEighteen corrective valgus intertrochanteric femoral osteotomies were performed in 18 patients (18 hips) for treatment of unilateral developmental coxa vara deformity and fixed with a T plate. There were 12 males and 6 females. The right hip was affected in 10 patients and the left hip in 8 patients. Clinically, patients were evaluated by Larson hip score. Radiographically, anteroposterior view of the pelvis and frog leg lateral views of the affected hip were taken preoperatively and compared with the findings at the final follow-up.ResultsThe average follow-up was 29 months (range, 24 to 36 months). Clinical results showed improvement of the mean Larson hip score from 57.8 to 97.0 (p < 0.001). Radiological results showed that all osteotomies were completely united in 2.4 months (range, 2 to 3 months) with the achievement of the planned correction angle. The average correction of Hilgenreiner's epiphyseal angle improved from 78.2° to 27.8° (p < 0.001) at the final follow-up. The femoral neck shaft angle was improved from 93.7° to 129.9° (p < 0.001) at the final follow-up. Shortening of the affected limb was corrected from 2.8 cm to 1.3 cm (p < 0.001) at the last follow-up. No major serious complications were recorded in the present study.ConclusionsIntertrochanteric valgus osteotomy of the proximal femur fixed with a T plate may be efficient for treatment of developmental coxa vara. With careful planning, it can result in a low complication rate and insignificant or minimal recurrence rate.

Surgical hip dislocation for treatment of cam femoroacetabular impingement.

Background:Cam femoroacetabular impingement is caused by a misshapen femoral head with a reduced head neck offset, commonly in the anterolateral quadrant. Friction in flexion, adduction and internal rotation causes limitation of the hip movements and pain progressively leading to labral and chondral damage and osteoarthritis. Surgical hip dislocation described by Ganz permits full exposure of the hip without damaging its blood supply. An osteochondroplasty removes the bump at the femoral head neck junction to recreate the offset for impingement free movement.Materials and Methods:Sixteen patients underwent surgery with surgical hip dislocation for the treatment of cam femoroacetabular impingement by open osteochondroplasty over last 6 years. Eight patients suffered from sequelae of avascular necrosis (AVN). Three had a painful dysplastic hip. Two had sequelae of Perthes disease. Three had combined cam and pincer impingement caused by retroversion of acetabulum. All patients were operated by the trochanteric flip osteotomy with attachments of gluteus medius and vastus lateralis, dissection was between the piriformis and gluteus minimus preserving the external rotators. Z-shaped capsular incision and dislocation of the hip was done in external rotation. Three cases also had subtrochanteric osteotomy. Two cases of AVN also had an intraarticular femoral head reshaping osteotomy.Results:Goals of treatment were achieved in all patients. No AVN was detected after a 6 month followup. There were no trochanteric nonunions. Hip range of motion improved in all and Harris hip score improved significantly in 15 of 16 cases. Mean alpha angle reduced from 86.13° (range 66°–108°) to 46.35° (range 39°–58°).Conclusion:Cam femoroacetabular Impingement causing pain and limitation of hip movements was treated by open osteochondroplasty after surgical hip dislocation. This reduced pain, improved hip motion and gave good to excellent results in the short term.

Postoperative Changes in Hemoglobin and Hematocrit in Patients Undergoing Primary Total Hip and Knee Arthroplasty.

Postoperative Changes in Hemoglobin and Hematocrit in Patients Undergoing Primary Total Hip and Knee Arthroplasty.

Triple attack technique for non-union of femoral neck fractures.

The purpose of this study was to describe the technique and clinical results following the utilization of biomechanical and biological means for adequate fracture healing in management of non-union of the neck of femur while preventing distortion of normal hip biomechanics. Twenty-two patients with non-united fractures of femoral neck in adults were treated with what was termed the 'triple attack' procedure. This constituted iliac autogenous bone grafting, valgus subtrochanteric osteotomy together with static fixation across the non-union fracture site of the neck to avoid delayed femoral neck shortening. All patients were classified as Pauwel's type III fractures. The mean time interval between the last operation and the current procedure was 4.6 months. Average operative time was 58.6 minutes. Patients were followed up for an average of 43.6 months. Complete union was achieved in all cases at an average of 4.3 months. Significant improvement of all radiological parameters was noticed together with the Harris hip score from an average of 21.2 pre-operatively to 89.6 at the last follow-up. The present study provides encouraging clinical and functional results to suggest that this newly described procedure ('triple attack') might be a valuable option in the management of non-united femoral neck fractures.

Hip contact stress and femoral neck retroversion: a biomechanical study to evaluate implication of femoroacetabular impingement.

The current literature on femoroacetabular impingement (FAI) is focused on acetabular orientation and femoral head asphericity, with little emphasis on the effect of version of the femoral neck. A biomechanical model was developed to determine the causative effect, if any, of femoral retroversion on hip contact stress and, if present, delineate the type of FAI with femoral neck retroversion. Five pairs of cadaveric hips (n = 10) were tested by loading the hip in 90° of flexion and measured the peak joint pressure and the location of the peak joint pressure. The experiment was repeated after performing a subtrochanteric osteotomy and retroverting the proximal femur by 10°. Ten hips were successfully tested, with one hip excluded due to an outlier value for peak joint pressure. Retroversion of the proximal femur significantly increased the magnitude of mean peak joint pressure. With retroversion, the location of the peak joint pressure was shifted posteroinferiorly in all cases. In conclusion, femoral neck retroversion increases peak joint pressure in the flexed position and may act as a cause of femoroacetabular impingement. The location of peak joint pressure suggests a pincer-type impingement with retroversion. The version of femoral neck should be assessed as a possible causative factor in patients with FAI, especially those with pincer-type impingement.

Femoral lengthening during hip resurfacing arthroplasty: A new surgical procedure

Correction of leg length discrepancy during hip arthroplasty is a technical challenge. Although resurfacing proposed to young subjects presents a number of advantages (stability, bone stock, etc.), it does not correct leg length discrepancy. We propose an original femoral lengthening technique concomitant to resurfacing performed through the same approach, consisting in a Z-shaped subtrochanteric osteotomy. Resurfacing was performed first and the femoral and acetabular reaming material was used for autografting. The series comprised five cases followed for a mean 42.2 months (range, 33–64 months). The mean surgical time was 100min (range, 76–124min). Weightbearing was authorized in all cases at the 8th week. The mean lengthening was 32mm (range, 25–40mm). Healing was observed in all cases. This surgical technique, reserved for very young subjects who accept an 8-week postoperative period without weightbearing, can be proposed in cases with substantial preoperative leg length discrepancy.

Subtrochanteric osteotomy for femoral mal-torsion through a surgical dislocation approach.

Missed torsional femur deformities may contribute to reasons for failure after open and more likely arthroscopic hip preservation surgery. A number of surgical approaches have been described for addressing torsion abnormalities. This report describes a subtrochanteric osteotomy technique in a consecutive series of patients with complex hip pathologies, for which intertrochanteric osteotomy is not suitable and precise derotation is required. Subtrochanteric derotation was performed, always in combination with a surgical hip dislocation, in accordance with the authors’ preferred technique. Before osteotomy, a localized decortication was executed. Application of a 4.5-mm broad or narrow plate was undertaken with dynamic compression of the osteotomy. Twenty-eight consecutive subtrochanteric derotational osteotomies were performed in 26 patients. Twenty-one females and five males were treated at an average age of 21.4 years (range, 12–43). Underlying diagnoses included dysplasia, arthrogryposis, cerebral palsy, Down’s syndrome, instability and impingement. The decision to perform derotation was for antetorsion over 20° or less than 0° (retrotorsion). Patients were followed clinically and radiographically till final follow-up. All patients went on to successful osteotomy union. There were two initial failures: one delayed union prompting revision fixation in a chronic smoker and one plate failure due to self-accelerated weight-bearing in a patient status post successful contralateral derotational osteotomy. Rotational deformity of the femur must be considered in the patient undergoing hip preservation surgery. This technique of subtrochanteric derotational osteotomy, with adjunctive surgical hip dislocation, is applicable and reproducible in the setting of complex hip pathologies. Level of evidence: IV, case series.

Initial Stability of Subtrochanteric Oblique Osteotomy in Uncemented Total Hip Arthroplasty: A Preliminary Finite Element Study.

BackgroundSubtrochanteric oblique osteotomy (SOO) has been widely used to reconstruct highly dislocated hips in uncemented total hip arthroplasty. The occurrence of complications can be attributed to the instability of the osteotomy region. The aim of this study was to evaluate the initial stability of SOO in uncemented total hip arthroplasty.Material/MethodsA 3-dimensional finite element femur-stem model was created, and a virtual SOO was performed at 4 oblique angles: 30°, 45°, 60°, and 90°. The von Mises stress distribution in the femur-stem complex and the displacement under different oblique angles were evaluated in the SOO models, in comparison with that of the intact model.ResultsThe study demonstrated that the distal fragment of the femur bore more stresses than the proximal fragment, and the maximum stress was concentrated in the femoral neck and the cortical bone, which contacted with the distal end of the stem. SOO increased the stress of both the femur and the stem, and fractures may occur in the stress concentration sites. Additionally, comparing the displacement at different oblique angles, the lateral region was larger than that of the medial region on the subtrochanteric osteotomy plane. The minimum micromotion on the osteotomy plane was obtained when the oblique angle was 45°.ConclusionsThe fit and fill of the distal fragment of the femur and the stem is essential for the stability of the subtrochanteric osteotomy region. The optimal oblique angle for SOO appears to be 45°.