Substrate Specificity Of Protease Research Articles

Cohnella 1759 cysteine protease shows significant long term half-life and impressive increased activity in presence of some chemical reagents

Thermostability and substrate specificity of proteases are major factors in their industrial applications. rEla is a novel recombinant cysteine protease obtained from a thermophilic bacterium, Cohnella sp.A01 (PTCC No: 1921). Herein, we were interested in recombinant production and characterization of the enzyme and finding the novel features in comparison with other well-studied cysteine proteases. The bioinformatics analysis showed that rEla is allosteric cysteine protease from DJ-1/ThiJ/PfpI superfamily. The enzyme was heterologously expressed and characterized and the recombinant enzyme molecular mass was 19.38 kD which seems to be smaller than most of the cysteine proteases. rEla exhibited acceptable activity in broad pH and temperature ranges. The optimum activity was observed at 50℃ and pH 8 and the enzyme showed remarkable stability by keeping 50% of residual activity after 100 days storage at room temperature. The enzyme Km and Vmax values were 21.93 mM, 8 U/ml, respectively. To the best of our knowledge, in comparison with the other characterized cysteine proteases, rEla is the only reported cysteine protease with collagen specificity. The enzymes activity increases up to 1.4 times in the presence of calcium ion (2 mM) suggesting it as the enzyme’s co-factor. When exposed to surfactants including Tween20, Tween80, Triton X-100 and SDS (1% and 4% v/v) the enzyme activity surprisingly increased up to 5 times.

Insights into substrate specificity of proteases for screening efficient dehairing enzymes

Though numerous proteases have been isolated and screened for the dehairing purpose, their use in the leather industry is limited mainly due to high cost, the need for expertise, and control during unit operation and alterations in the quality of leather due to lack of the right kind of substrate specificity of the enzymes used. This paper deals with the comparative specificity and dehairing efficiency of proteases isolated from Bacillus cereus VITSP01 (PE2) and Brevibacterium luteolum VITSP02 (PE). PE2 and PE were found to be trypsin-like and elastase-like serine proteases respectively. The protease of VITSP02 degraded the proteoglycans efficiently in comparison to that of VITSP01. The results suggest that the possible targets of the studied proteases might be skin proteoglycans, including those cementing the hair root bulb. Hence, an in-depth study on the substrate specificity of the dehairing proteases would help in designing an improved screening method for isolating potent dehairing enzymes.

Deep profiling of protease substrate specificity enabled by dual random and scanned human proteome substrate phage libraries

Proteolysis is a major posttranslational regulator of biology inside and outside of cells. Broad identification of optimal cleavage sites and natural substrates of proteases is critical for drug discovery and to understand protease biology. Here, we present a method that employs two genetically encoded substrate phage display libraries coupled with next generation sequencing (SPD-NGS) that allows up to 10,000-fold deeper sequence coverage of the typical six- to eight-residue protease cleavage sites compared to state-of-the-art synthetic peptide libraries or proteomics. We applied SPD-NGS to two classes of proteases, the intracellular caspases, and the ectodomains of the sheddases, ADAMs 10 and 17. The first library (Lib 10AA) allowed us to identify 104 to 105 unique cleavage sites over a 1,000-fold dynamic range of NGS counts and produced consensus and optimal cleavage motifs based position-specific scoring matrices. A second SPD-NGS library (Lib hP), which displayed virtually the entire human proteome tiled in contiguous 49 amino acid sequences with 25 amino acid overlaps, enabled us to identify candidate human proteome sequences. We identified up to 104 natural linear cut sites, depending on the protease, and captured most of the examples previously identified by proteomics and predicted 10- to 100-fold more. Structural bioinformatics was used to facilitate the identification of candidate natural protein substrates. SPD-NGS is rapid, reproducible, simple to perform and analyze, inexpensive, and renewable, with unprecedented depth of coverage for substrate sequences, and is an important tool for protease biologists interested in protease specificity for specific assays and inhibitors and to facilitate identification of natural protein substrates.

Design and Characterization of a New pVII Combinatorial Phage Display Peptide Library for Protease Substrate Mining Using Factor VII Activating Protease (FSAP) as Model.

We describe a novel, easy and efficient combinatorial phage display peptide substrate‐mining method to map the substrate specificity of proteases. The peptide library is displayed on the pVII capsid of the M13 bacteriophage, which renders pIII necessary for infectivity and efficient retrieval, in an unmodified state. As capture module, the 3XFLAG was chosen due to its very high binding efficiency to anti‐FLAG mAbs and its independency of any post‐translational modification. This library was tested with Factor‐VII activating protease (WT‐FSAP) and its single‐nucleotide polymorphism variant Marburg‐I (MI)‐FSAP. The WT‐FSAP results confirmed the previously reported Arg/Lys centered FSAP cleavage site consensus as dominant, as well as reinforcing MI‐FSAP as a loss‐of‐function mutant. Surprisingly, rare substrate clones devoid of basic amino acids were also identified. Indeed one of these peptides was cleaved as free peptide, thus suggesting a broader range of WT‐FSAP substrates than previously anticipated.

Challenges and Opportunities in Identifying and Characterising Keratinases for Value-Added Peptide Production

Keratins are important structural proteins produced by mammals, birds and reptiles. Keratins usually act as a protective barrier or a mechanical support. Millions of tonnes of keratin wastes and low value co-products are generated every year in the poultry, meat processing, leather and wool industries. Keratinases are proteases able to breakdown keratin providing a unique opportunity of hydrolysing keratin materials like mammalian hair, wool and feathers under mild conditions. These mild conditions ameliorate the problem of unwanted amino acid modification that usually occurs with thermochemical alternatives. Keratinase hydrolysis addresses the waste problem by producing valuable peptide mixes. Identifying keratinases is an inherent problem associated with the search for new enzymes due to the challenge of predicting protease substrate specificity. Here, we present a comprehensive review of twenty sequenced peptidases with keratinolytic activity from the serine protease and metalloprotease families. The review compares their biochemical activities and highlights the difficulties associated with the interpretation of these data. Potential applications of keratinases and keratin hydrolysates generated with these enzymes are also discussed. The review concludes with a critical discussion of the need for standardized assays and increased number of sequenced keratinases, which would allow a meaningful comparison of the biochemical traits, phylogeny and keratinase sequences. This deeper understanding would facilitate the search of the vast peptidase family sequence space for novel keratinases with industrial potential.

Ultra-high throughput screening for novel protease specificities.

The screening of large libraries of enzyme variants remains an essential tool in evolving biocatalysts toward improved properties for applications in medicine, chemistry, and a broad variety of other fields. Over the last decades, the technology for conducting systematic screens of arrayed members of a library of enzyme variants has made great strides in terms of increasing throughput and reducing assay volume. Here, we describe in detail an alternative to arrayed analysis, which is a screen based on density shifts in result of changed enzyme function, which allows highly parallelized screening. Specifically, we link changes in protease substrate specificity in vivo to the production of an alternative reporter protein, catalase. Depending on the catalase expression level, microcolonies of library bacteria with active protease variants contained in polymeric droplets generate an oxygen bubble, which causes a density shift in the droplet and enables it to float.

POLYANILINE-BASED PEPTIDE ARRAYS: PRODUCTION, PROPERTIES AND APPLICATION IN STUDIES OF SUBSTRATE SPECIFICITY OF PROTEASES

Method for peptidyl-polyaniline (peptidyl-PANI) preparation was developed, and obtained substances were characterized. Influence of polymerization conditions on the peptidyl-PANI structure and properties was studied. A potential use of peptidyl-PANI peptide arrays in protease substrate specificity investigations was demonstrated.

Synthetic and biological approaches to map substrate specificities of proteases.

Proteases are regulators of diverse biological pathways including protein catabolism, antigen processing and inflammation, as well as various disease conditions, such as malignant metastasis, viral infection and parasite invasion. The identification of substrates of a given protease is essential to understand its function and this information can also aid in the design of specific inhibitors and active site probes. However, the diversity of putative protein and peptide substrates makes connecting a protease to its downstream substrates technically difficult and time-consuming. To address this challenge in protease research, a range of methods have been developed to identify natural protein substrates as well as map the overall substrate specificity patterns of proteases. In this review, we highlight recent examples of both synthetic and biological methods that are being used to define the substrate specificity of protease so that new protease-specific tools and therapeutic agents can be developed.

Quantitative Analysis of the Substrate Specificity of Human Rhinovirus 3C Protease and Exploration of Its Substrate Recognition Mechanisms.

Human rhinovirus 3C protease (HRV 3C-P) is a high-value commercial cysteine protease that could specifically recognize the short peptide sequence of LEVLFQ↓GP. In here, a strategy based on our previous Yeast Endoplasmic Reticulum Sequestration Screening (YESS) approach was developed in Saccharomyces cerevisiae, a model microorganism, to fully characterize the substrate specificity of a typical human virus protease, HRV 3C-P, in a quantitative and fast manner. Our results demonstrated that HRV 3C-P had very high specificity at P1 and P1' positions, only recognizing Gln/Glu at the P1 position and Gly/Ala/Cys/Ser at the P1' position, respectively. Comparably, it exhibited efficient recognition of most residues at the P2' position, except Trp. Further biochemical characterization through site mutagenesis, enzyme structural modeling, and comparison with other 3C proteases indicated that the S1 pocket of HRV 3C-P was constituted by neutral and basic amino acids, in which His160 and Thr141 specifically interacted with Gln or Glu residues at the substrate P1 position. Additionally, the stringent S1' pocket determined its unique property of only accommodating residues without or with short side chains. Based on our characterization, LEVLFQ↓GM was identified as a more favorable substrate than the original LEVLFQ↓GP at high temperature, which might be caused by the conversion of random coils to β-turns in HRV 3C-P along with the temperature increase. Our studies prompted a further understanding of the substrate specificity and recognition mechanism of HRV 3C-P. Besides, the YESS-PSSC combined with the enzyme modeling strategy in this study provides a general strategy for deciphering the substrate specificities of proteases.

Calcium ion induced thermodynamic stability, bisubstrate specificity, and differential organic solvent tolerance of a predominantly β-sheet serine protease from Bacillus aquimaris VITP4.

The present study was aimed to get insights on the role of calcium ions on the thermodynamic stability, substrate specificity, and organic solvent compatibility of the extracellular protease produced by Bacillus aquimaris VITP4. Presence of Ca2+ enhanced the activity of the enzyme in the temperature range of 30-60°C and increased the half-life from 164 to 234Min. Circular dichroism experiments indicated that the temperature of half-denaturation (Tm ) of the protease increased from 76 to 86°C. As judged by fluorescence emission profiles, the overall fold of the enzyme around the tryptophan residues could be similar. Further, thermal inactivation experiments revealed that the enzyme followed first order kinetics, with increase in energy for inactivation (Eai ) by 24.2±1.2kJmol-1 in the presence of Ca2+ . Studies with synthetic peptides as well as with bovine serum albumin signified preferential hydrolysis of the peptide bonds at the C-terminus of alanine residues (with a kcat /KM of 141,400M-1 Sec-1 ) and at the C-terminus of arginine residues with a lower specificity (72,400M-1 Sec-1 ), indicating bisubstrate specificity of the enzyme. The enzyme was found to be compatible with organic solvents (50%, v/v) such as acetonitrile and butanol, indicating possible application under demanding nonaqueous conditions.

Purification and biochemical characteristics of the extracellular protease from Pediococcus pentosaceus isolated from Harbin dry sausages

This study investigated the purification and biochemical characteristics of the protease produced by Pediococcus pentosaceus isolated from Harbin dry sausages. The optimized fermented conditions were as follows: fermentation time 36 h, initial pH 5 and fermentation temperature 30 °C. A 29.6 kDa extracellular protease was purified using ammonium sulphate deposition, ion exchange layer system and gel filtration. The protease produced by P. pentosaceus had a certain pH and thermal stability at pH 6 and 30 °C. The microbial protease activity could be inhibited by ethylene diamine tetraacetic acid disodium salt (EDTA). Vmax and Km of the protease were 43.9 mg/min and 8.3 mg/mL, respectively. Sodium dodecyl sulphate-polyacrylamide gel electrophoresis (SDS-PAGE) reflected the ability of the protease to hydrolyse sarcoplasmic and myofibrillar proteins, particularly those of myosin heavy chain, paramyosin, actin, phosphorylase and creatine kinase-M types. 3D structure modelling of the P. pentosaceus protease found two domains in the protease protein and the correlation of the active sites with protease properties and substrate specificity. In conclusion, P. pentosaceus can be used as a starter culture or enzyme producing strain for inoculation in Harbin dry sausages.

Structural basis for catalysis and substrate specificity of a 3C-like cysteine protease from a mosquito mesonivirus

Cavally virus (CavV) is a mosquito-borne plus-strand RNA virus in the family Mesoniviridae (order Nidovirales). We present X-ray structures for the CavV 3C-like protease (3CLpro), as a free enzyme and in complex with a peptide aldehyde inhibitor mimicking the P4-to-P1 residues of a natural substrate. The 3CLpro structure (refined to 1.94 Å) shows that the protein forms dimers. The monomers are comprised of N-terminal domains I and II, which adopt a chymotrypsin-like fold, and a C-terminal α-helical domain III. The catalytic Cys-His dyad is assisted by a complex network of interactions involving a water molecule that mediates polar contacts between the catalytic His and a conserved Asp located in the domain II-III junction and is suitably positioned to stabilize the developing positive charge of the catalytic His in the transition state during catalysis. The study also reveals the structural basis for the distinct P2 Asn-specific substrate-binding pocket of mesonivirus 3CLpros.

Pep-MS assay: Protease hydrolysis assay system using photo-cleavable peptide array and mass spectrometer

Food processing technology such as protein hydrolysis using proteases has been receiving a lot of attention, and it is important to accurately understand the cleavage specificity of each protease for selecting a protease suited to aims. Although numerous methods have been reported to reveal the substrate specificity of proteases, there is no method to evaluate simply, quickly, reasonably, and accurately. This study set out to devise Pep-MS assay, a novel assay system that can be used to comprehensively clarify positions at which proteases cleave, by combining a mass spectrometer and a photo-cleavable peptide array. First, we evaluated peptide array corresponding to the primary sequences of αS1-casein, αS2-casein and β-casein with trypsin to verify the accuracy of the Pep-MS assay. The evaluation of cleavage positions by the trypsin protease reagent using the Pep-MS assay resulted in a matching rate of about 96.8% to rational cleavage positions. Next, we confirmed the cleavage positions in αS2-casein or β-lactoglobulin by an industrial bacterial protease from Bacillus subtilis at some protease reaction temperatures or reaction times. The Pep-MS assay clarified the differences in the cleavage patterns due to the reaction temperature, and the change in the cleavage strength with the reaction time. Pep-MS assay is a promising method for evaluating the substrate specificity of proteases, which will be useful to find effective production conditions for functional peptide from foods and effective hydrolysis conditions for decreasing allergen of food proteins.

Short Peptides with Uncleavable Peptide Bond Mimetics as Photoactivatable Caspase-3 Inhibitors.

Chemical probes that covalently interact with proteases have found increasing use for the study of protease function and localization. The design and synthesis of such probes is still a bottleneck, as the strategies to target different families are highly diverse. We set out to design and synthesize chemical probes based on protease substrate specificity with inclusion of an uncleavable peptide bond mimic and a photocrosslinker for covalent modification of the protease target. With caspase-3 as a model target protease, we designed reduced amide and triazolo peptides as substrate mimetics, whose sequences can be conveniently constructed by modified solid phase peptide synthesis. We found that these probes inhibited the caspase-3 activity, but did not form a covalent bond. It turned out that the reduced amide mimics, upon irradiation with a benzophenone as photosensitizer, are oxidized and form low concentrations of peptide aldehydes, which then act as inhibitors of caspase-3. This type of photoactivation may be utilized in future photopharmacology experiments to form protease inhibitors at a precise time and location.

Binding to small ubiquitin-like modifier and the nucleolar protein Csm1 regulates substrate specificity of the Ulp2 protease

Ulp1 and Ulp2, in the yeast Saccharomyces cerevisiae, are the founding members of deSUMOylating enzymes. These enzymes remove small ubiquitin-like modifier (SUMO) from proteins and are conserved in all eukaryotes. Previous studies have shown that Ulp1 deSUMOylates the bulk of intracellular SUMOylated proteins, whereas Ulp2 is a highly specific enzyme. However, the mechanism for Ulp2's substrate specificity has been insufficiently understood. Here we show that the C-terminal regulatory domain of Ulp2 contains three distinct, yet conserved, motifs that control its in vivo substrate specificity and cell growth. Among them, a SUMO-interacting motif (SIM) was found to coordinate with the domain of Ulp2 that binds to the nucleolar protein Csm1 to ensure maximal deSUMOylation of Ulp2's nucleolar substrates. We found that whereas the Csm1-binding domain of Ulp2 recruits this enzyme to the nucleolus, Ulp2's C-terminal SIM promotes its SUMO protease activity and plays a key role in mediating the in vivo specificity of Ulp2. Thus, the substrate specificity of Ulp2 is controlled by both its subcellular localization and the SUMOylation status of its substrates. These findings illustrate the highly coordinated and dynamic nature of the SUMO pathways in maintaining homeostasis of intracellular SUMOylation.

Characterization of a bafinivirus exoribonuclease activity.

White bream virus (WBV), a poorly characterized plus-strand RNA virus infecting freshwater fish of the Cyprinidae family, is the prototype species of the genus Bafinivirus in the subfamily Torovirinae (family Coronaviridae, order Nidovirales). In common with other nidoviruses featuring >20 kilobase genomes, bafiniviruses have been predicted to encode an exoribonuclease (ExoN) in their replicase gene. Here, we used information on the substrate specificity of bafinivirus 3C-like proteases to express WBV ExoN in an active form in Escherichia coli. The 374-residue protein displayed robust 3'-to-5' exoribonuclease activity in the presence of Mg2+ ions and, unlike its coronavirus homologues, did not require a protein cofactor for activity. Characterization of mutant forms of ExoN provided support for predictions on putative active-site and conserved zinc-binding residues. WBV ExoN was revealed to be most active on double-stranded RNA substrates containing one or two non-paired 3'-terminal nucleotides, supporting its presumed role in increasing the fidelity of the bafinivirus RNA-dependent RNA polymerase.

Substrate Specificity of Cysteine Proteases Beyond the S2 Pocket: Mutagenesis and Molecular Dynamics Investigation of Fasciola hepatica Cathepsins L.

Cysteine proteases are widespread in all life kingdoms, being central to diverse physiological processes based on a broad range of substrate specificity. Paralogous Fasciola hepatica cathepsin L proteases are essential to parasite invasion, tissue migration and reproduction. In spite of similarities in their overall sequence and structure, these enzymes often exhibit different substrate specificity. These preferences are principally determined by the amino acid composition of the active site's S2 subsite (pocket) of the enzyme that interacts with the substrate P2 residue (Schetcher and Berger nomenclature). Although secreted FhCL1 accommodates aliphatic residues in the S2 pocket, FhCL2 is also efficient in cleaving proline in that position. To understand these differences, we engineered the FhCL1 S2 subsite at three amino acid positions to render it identical to that present in FhCL2. The substitutions did not produce the expected increment in proline accommodation in P2. Rather, they decreased the enzyme's catalytic efficiency toward synthetic peptides. Nonetheless, a change in the P3 specificity was associated with the mutation of Leu67 to Tyr, a hinge residue between the S2 and S3 subsites that contributes to the accommodation of Gly in S3. Molecular dynamic simulations highlighted changes in the spatial distribution and secondary structure of the S2 and S3 pockets of the mutant FhCL1 enzymes. The reduced affinity and catalytic efficiency of the mutant enzymes may be due to a narrowing of the active site cleft that hinders the accommodation of substrates. Because the variations in the enzymatic activity measured could not be exclusively allocated to those residues lining the active site, other more external positions might modulate enzyme conformation, and, therefore, catalytic activity.

Position-dependent impact of hexafluoroleucine and trifluoroisoleucine on protease digestion.

Rapid digestion by proteases limits the application of peptides as therapeutics. One strategy to increase the proteolytic stability of peptides is the modification with fluorinated amino acids. This study presents a systematic investigation of the effects of fluorinated leucine and isoleucine derivatives on the proteolytic stability of a peptide that was designed to comprise substrate specificities of different proteases. Therefore, leucine, isoleucine, and their side-chain fluorinated variants were site-specifically incorporated at different positions of this peptide resulting in a library of 13 distinct peptides. The stability of these peptides towards proteolysis by α-chymotrypsin, pepsin, proteinase K, and elastase was studied, and this process was followed by an FL-RP-HPLC assay in combination with mass spectrometry. In a few cases, we observed an exceptional increase in proteolytic stability upon introduction of the fluorine substituents. The opposite phenomenon was observed in other cases, and this may be explained by specific interactions of fluorinated residues with the respective enzyme binding sites. Noteworthy is that 5,5,5-trifluoroisoleucine is able to significantly protect peptides from proteolysis by all enzymes included in this study when positioned N-terminal to the cleavage site. These results provide valuable information for the application of fluorinated amino acids in the design of proteolytically stable peptide-based pharmaceuticals.

Characterization of the deubiquitination activity and substrate specificity of the chicken ubiquitin-specific protease 1/USP associated factor 1 complex.

Deubiquitinases (DUBs) are essential regulators of intracellular processes involving ubiquitin (Ub) modification. The human DUB ubiquitin-specific protease 1 (hUSP1) interacts with human USP-associated factor 1 (hUAF1), and helps to regulate processes such as DNA damage repair. Previously, we identified a chicken USP1 homologue (chUSP1) during an investigation into the properties of Marek's disease virus (MDV). However, chUSP1's deubiquitination activity, interaction with chUAF1, and substrate specificity remained unknown. In the present study, we expressed and purified both chUAF1 and chUSP1 with or without putative catalytic core mutations using the Bac-to-Bac system, before investigating their deubiquitination activity and kinetics using various substrates. chUSP1 was shown to interact with chUAF1 both in cellular assays in which the two proteins were co-expressed, and in in vitro assays using purified proteins. Heterodimerization with chUAF1 increased the deubiquitination activity of chUSP1 up to 54-fold compared with chUSP1 alone. The chUSP1 mutants C91S, H603A, and D758A reduced the deubiquitination activity of the chUSP1/chUAF1 complex by 10-, 7-, and 33-fold, respectively, while the C91A and H594A chUSP1 mutants eliminated deubiquitination activity of the chUSP1/chUAF1 complex completely. This suggests that C91 and H594, but not D758, are essential for chUSP1 deubiquitination activity, and that a nucleophilic group at position 91 is needed for the deubiquitination reaction. The chUSP1/chUAF1 complex was found to have distinct substrate preferences; efficient hydrolysis of Ub dimers with K11-, K48-, and K63-linkages was seen, with weaker hydrolysis observed with K6-, K27-, and K33-linkages and no hydrolysis seen with a K29-linkage. Furthermore, other Ub-like substrates were disfavored by the complex. No activity was seen with SUMO1-GST, SUMO2- and SUMO3-dimers, ISG15-Rho, FAT10-Rho, or Ufm1-Rho, and only weak activity was observed with NEDD8-Rho. Overall, the data presented here characterize the activity and substrate preferences of chUSP1, and thus may facilitate future studies on its in vivo role.

Synthesis of a HyCoSuL peptide substrate library to dissect protease substrate specificity.

Many biologically and chemically based approaches have been developed to design highly active and selective protease substrates and probes. It is, however, difficult to find substrate sequences that are truly selective for any given protease, as different proteases can demonstrate a great deal of overlap in substrate specificities. In some cases, better enzyme selectivity can be achieved using peptide libraries containing unnatural amino acids such as the hybrid combinatorial substrate library (HyCoSuL), which uses both natural and unnatural amino acids. HyCoSuL is a combinatorial library of tetrapeptides containing amino acid mixtures at the P4-P2 positions, a fixed amino acid at the P1 position, and an ACC (7-amino-4-carbamoylmethylcoumarin) fluorescent tag occupying the P1' position. Once the peptide is recognized and cleaved by a protease, the ACC is released and produces a readable fluorescence signal. Here, we describe the synthesis and screening of HyCoSuL for human caspases and legumain. We also discuss possible modifications and adaptations of this approach that make it a useful tool for developing highly active and selective reagents for a wide variety of proteolytic enzymes. The protocol can be divided into three major parts: (i) solid-phase synthesis of the fluorescence-labeled HyCoSuL, (ii) screening of protease P4-P2 preferences, and (iii) synthesis of the optimized activity probes equipped with an AOMK (acyloxymethyl ketone) reactive group and a biotin label for easy detection. Beginning with the library design, the entire protocol can be completed in 4-8 weeks (HyCoSuL synthesis: 3-5 weeks; HyCoSuL screening per enzyme: 4-8 d; and activity-based probe synthesis: 1-2 weeks).