Substrate-binding Region Research Articles

Influence of a mutation in the ATP-binding region of Ca2+/calmodulin-dependent protein kinase II on its interaction with peptide substrates.

CaMKII (Ca2+/calmodulin-dependent protein kinase II) is expressed in high concentrations in the brain and is found enriched in the postsynaptic densities. The enzyme is activated by the binding of calmodulin to the autoregulatory domain in the presence of high levels of intracellular Ca2+, which causes removal of auto-inhibition from the N-terminal catalytic domain. Knowledge of the 3D (three-dimensional) structure of this enzyme at atomic resolution is restricted to the association domain, a region at the extreme C-terminus. The catalytic domain of CaMKII shares high sequence similarity with CaMKI. The 3D structure of the catalytic core of CaMKI comprises ATP- and substrate-binding regions in a cleft between two distinct lobes, similar to the structures of all protein kinases solved to date. Mutation of Glu-60, a residue in the ATP-binding region of CaMKII, to glycine exerts different effects on phosphorylation of two peptide substrates, syntide and NR2B ( N -methyl-D-aspartate receptor subunit 2B) 17-mer. Although the mutation caused increases in the Km values for phosphorylation for both the peptide substrates, the effect on the kcat values for each was different. The kcat value decreased in the case of syntide, whereas it increased in the case of the NR2B peptide as a result of the mutation. This resulted in a significant decrease in the apparent kcat/Km value for syntide, but the change was minimal for the NR2B peptide. These results indicate that different catalytic mechanisms are employed by the kinase for the two peptides. Molecular modelling suggests structural changes are likely to occur at the peptide-binding pocket in the active state of the enzyme as a consequence of the Glu-60-->Gly mutation.

Structure of the Functional Fragment of Auxilin Required for Catalytic Uncoating of Clathrin-Coated Vesicles

The three-dimensional structure of the C-terminal 20 kDa portion of auxilin, which consists of the clathrin binding region and the C-terminal J-domain, has been determined by NMR. Auxilin is an Hsp40 family protein that catalytically supports the uncoating of clathrin-coated vesicles through recruitment of Hsc70 in an ATP hydrolysis-driven process. This 20 kDa auxilin construct contains the minimal sequential region required to uncoat clathrin-coated vesicles catalytically. The tertiary structure consists of six helices, where the first three are unique to auxilin and believed to be important in the catalytic uncoating of clathrin. The last three helices correspond to the canonical J-domain of Hsp40 proteins. The first helix, helix 1, which contains a conserved FEDLL motif believed to be necessary for clathrin binding, is transient and not packed against the rest of the structure. Helix 1 is joined to helix 2 by a flexible linker. Helix 2 packs loosely against the J-domain surface, whereas helix 3 packs tightly and makes critical contributions to the J-domain core. A long insert loop, also unique to the auxilin J-domain, is seen between helix 4 and helix 5. Comparison with a previously reported structure of auxilin containing only helices 3-6 shows a significant difference in the invariant HPD segment of the J-domain. The region where helix 1 is located corresponds to the expected region of the unstructured G/F-rich domain seen in DnaJ, i.e., the canonical N-terminal J-domain protein. In contrast, the location of helix 1 differs from the substrate binding regions of two other Hsp40 proteins, Escherichia coli Hsc20 and viral large T antigen. The variety of biological functions performed by Hsp40 proteins such as auxilin, as well as the observed differences in the structure and function of their substrate binding regions, supports the notion that Hsp40 proteins act as target-specific adaptors that recruit their more general Hsp70 partners to specific biological roles.

Thermodynamic stability of the C-terminal domain of the human inducible heat shock protein 70

The stability of the substrate-binding region of human inducible Hsp70 was studied by a combination of spectroscopic and calorimetric methods. Thermal denaturation of the protein involves four accessible states: the native state, two largely populated intermediates, and the denatured state, with transition temperatures of 52.8, 56.2 and 71.2 °C, respectively, at pH 6.5. The intermediate spectroscopic properties resemble those of molten globules but they still retain substantial enthalpy and heat capacity of unfolding. Moreover, the similar heat capacities of the first intermediate and the native state suggests that the hydrophobic core of the intermediate would be highly native-like and that its formation would involve an increased disorder in localized portions of the structure rather than formation of a globally disordered state. The structure of the C-terminal of Hsp70 is destabilized as the pH separates from neutrality. The intermediates become populated under heat shock conditions at acidic and basic pHs. Denaturation by guanidine chloride also indicated that the protein undergoes a sequential unfolding process. The free energy change associated to the loss of secondary structure at 20 °C (pH 6.5) is 3.1 kcal·mol −1 at high salt conditions. These values agree with the free energy changes estimated from differential scanning calorimetry for the transition between the second intermediate and the final denatured state.

Construction of Chimeric Glucansucrases for Analyzing Substrate-binding Regions That Affect the Structure of Glucan Products

A gene that encodes dextransucrase S (dsrS) from Leuconostoc mesenteroides NRRL B-512F encodes a glucansucrase dextransucrase S (DSRS) which mainly produces water-soluble glucan (dextran), while the dsrT5 gene derived from dsrT of the B-512F strain encodes an enzyme dextransucrase T5 (DSRT5), which mainly produces water-insoluble glucan. Tyr340-Asn510 of DSRS and Tyr307-Asn477 of DSRT5 (Site 1), Lys696-Gly768 of DSRS and Lys668-Gly740 of DSRT5 (Site 2), and Asn917-Lys1131 of DSRS and Asn904-Lys1118 of DSRT5 (Site 3) were exchanged and six different chimeric enzymes were constructed. Water-soluble glucan produced by recombinant DSRS was composed of 64% 6-linked glucopyranoside (Glcp), 9% 3,6-linked Glcp, and 13% 4-linked Glcp. Water-insoluble glucan produced by recombinant DSRT5 was composed of 47% 6-linked Glcp and 43% 3-linked Glcp. All of the chimeric enzymes produced glucans different from the ones produced by their parental enzymes. Some of the glucans produced by chimeric enzymes were extremely changed. The Site 1 chimeric enzyme of DSRS (STS1) produced water-soluble glucan composed mostly of 6-linked Glcp. That of DSRT5 (TST1) produced water-insoluble glucan composed mostly of 4-linked Glcp. The Site 3 chimeric enzyme of DSRS (STS3) produced mainly water-insoluble glucan, DSRT5 (TST3) produced mainly water-soluble glucans, and all of the glucan fractions consisted of 3-Glcp, 4-Glcp, and 6-Glcp. The amounts of the three linkages in the water-soluble glucan produced by TST3 were about 1:1:1. Site 1 was assumed to be important for making or avoiding making alpha-1,4 linkages, while Site 3 was assumed to be important for determining the kinds of glucosyl linkages made.

Role of Aspartate-133 and Histidine-458 in the Mechanism of Tryptophan Indole-Lyase from Proteus vulgaris

Tryptophan indole-lyase (Trpase) from Proteus vulgaris is a pyridoxal 5'-phosphate dependent enzyme that catalyzes the reversible hydrolytic cleavage of L-Trp to yield indole and ammonium pyruvate. Asp-133 and His-458 are strictly conserved in all sequences of Trpase, and they are located in the proposed substrate-binding region of Trpase. These residues were mutated to alanine to probe their role in substrate binding and catalysis. D133A mutant Trpase has no measurable activity with L-Trp as substrate, but still retains activity with S-(o-nitrophenyl)-L-cysteine, S-alkyl-L-cysteines, and beta-chloro-L-alanine. H458A mutant Trpase has 1.6% of wild-type Trpase activity with L-Trp, and high activity with S-(o-nitrophenyl)-L-cysteine, S-alkyl-L-cysteines, and beta-chloro-L-alanine. H458A mutant Trpase does not exhibit the pK(a) of 5.3 seen in the pH dependence of k(cat)/K(m) of L-Trp for wild-type Trpase. Both mutant enzymes are inhibited by L-Ala, L-Met, and L-Phe, with K(i) values similar to those of wild-type Trpase, but oxindolyl-L-alanine and beta-phenyl-DL-serine show much weaker binding to the mutant enzymes, suggesting that Asp-133 and His-458 are involved in the binding of these ligands. D133A and H458A mutant Trpase exhibit absorption and CD spectra in the presence of substrates and inhibitors that are similar to wild-type Trpase, with peaks at about 420 and 500 nm. The rate constants for formation of the 500 nm bands for the mutant enzymes are equal to or greater than those of wild-type Trpase, indicating that Asp-133 and His-458 do not play a role in the formation of quinonoid intermediates. In constrast to wild-type and H458A mutant Trpase, D133A mutant Trpase forms an intermediate from S-ethyl-L-Cys that absorbs at 345 nm, and is likely to be an alpha-aminoacrylate. Crystals of D133A and H458A mutant Trpase bind amino acids with similar affinity as the proteins in solution, except for L-Ala, which binds to D133A mutant Trpase crystals about 20-fold stronger than in solution. These results suggest that Asp-133 and His-458 play an important role in the elimination reaction of L-Trp. Asp-133 likely forms a hydrogen bond directly to the indole NH of the substrate, while His-458 probably is hydrogen bonded to Asp-133.

A Bipartite Mechanism for ERK2 Recognition by Its Cognate Regulators and Substrates

Mitogen-activated protein (MAP) kinases control gene expression in response to extracellular stimuli and exhibit exquisite specificity for their cognate regulators and substrates. We performed a structure-based mutational analysis of ERK2 to identify surface areas that are important for recognition of its interacting proteins. We show that binding and activation of MKP3 by ERK2 involve two distinct protein-protein interaction sites in ERK2. Thus, the common docking (CD) site composed of Glu-79, Tyr-126, Arg-133, Asp-160, Tyr-314, Asp-316, and Asp-319 are important for high affinity MKP3 binding but not essential for ERK2-induced MKP3 activation. MKP3 activation requires residues Tyr-111, Thr-116, Leu-119, Lys-149, Arg-189, Trp-190, Glu-218, Arg-223, Lys-229, and His-230 in the ERK2 substrate-binding region, located distal to the common docking site. Interestingly, many of the residues important for MKP3 recognition are also used for Elk1 binding and phosphorylation. In addition to the shared residues, there are also residues that are unique to each target recognition. There is evidence indicating that the CD site and the substrate-binding region defined here are also utilized for MEK1 recognition, and indeed, we demonstrate that the binding of MKP3, Elk1, and MEK1 to ERK2 is mutually exclusive. Taken together, our data suggest that the efficiency and fidelity of ERK2 signaling is achieved by a bipartite recognition process. In this model, one part of the ERK2-binding proteins (e.g. the kinase interaction motif sequence) docks to the CD site located on the back side of the ERK2 catalytic pocket for high affinity association, whereas the interaction of the substrate-binding region with another structural element (e.g. the FXFP motif in MKP3 and Elk1) may not only stabilize binding but also provide contacts crucial for modulating the activity and/or specificity of ERK2 target molecules.

Three Dimensional Structures of S189D Chymotrypsin and D189S Trypsin Mutants: The Effect of Polarity at Site 189 on a Protease-specific Stabilization of the Substrate-binding Site

The crystal structure of S189D rat chymotrypsin have been determined (resolution 2.55Å) and compared, together with D189S rat trypsin to wild-type structures to examine why these single mutations resulted in poorly active, non-specific enzymes instead of converting the specificities of trypsin and chymotrypsin into each other. Both mutants have stable structure but suffer from a surprisingly large number of serious deformations. These are restricted to the activation domain, mainly to the substrate-binding region and are larger in S189D chymotrypsin. A wild-type substrate-binding mode in the mutants is disfavored by substantial displacements of the Cys191-Cys220 disulfide and loop segments 185-195 (loop C2/D2) and 217-224 (loop E2/F2) at the specificity site. As a consequence, the substrate-binding clefts become wider and more solvent-accessible in the middle third and occluded in the lower third. Interestingly, while the Ser189 residue in D189S trypsin adopts a chymotrypsin-like conformation, the Asp189 residue in S189D chymotrypsin is turned out toward the solvent. The rearrangements in D189S trypsin are at the same sites where trypsin and trypsinogen differ and, in S189D chymotrypsin, the oxyanion hole as well as the salt-bridge between Asp194 and the N-terminal of Ile16 are missing as in chymotrypsinogen. Despite these similarities, the mutants do not have zymogen conformation. The Ser189Asp and Asp189Ser substitutions are structurally so disruptive probably because the stabilization of such a different specificity site polarities as those after the removal or introduction of a charged residue are beyond the capability of the wild-type conformation of the substrate-binding region.

The role of tryptophan 1072 in human PDE3B inhibitor binding

The catalytic domain of recombinant human PDE3B was expressed in Escherichia coli as inclusion bodies and refolded to form active enzyme. A mutation at tryptophan 1072 in PDE3B disrupts inhibitor binding, but has minimal effect on cAMP hydrolysis. The W1072A mutation caused a 158-fold decrease in affinity for cilostamide, a 740-fold decrease for cGMP, and a 15-fold decrease in affinity for IBMX. The corresponding tyrosine mutation had a smaller effect. However, the K m of cAMP for the W1072A mutation was only increased by about 7-fold. The data indicate that the inhibitor binding region is not completely coincident with the substrate binding region. The homologous residue in PDE4B is located on helix 16 within 7 Å of the predicted bound substrate. A model of PDE3B was constructed based on the X-ray crystal structure of PDE4B.

Computer visualisation of the active site of monoamine oxidase-A by means of selective inhibitors.

Computer visualisation of the active site of monoamine oxidase (MAO) is based on an assumption that the specific and reversible interaction of a ligand (substrate or inhibitor) with the substrate-binding region of the active site requires shape complementarity. The size of the ligand must allow its accommodation at the substrate-binding region. Analysis of the MAO-inhibitory activity of rigid analogues of isatin and pirlindole revealed a dependence between three-dimensional linear sizes of these molecules and the efficacy of inhibition of both MAO-A and MAO-B. However, flexible molecules did not exhibit any dependence between linear sizes and MAO-B inhibitory potency, possibly because they folded into compact structures could fit into the substrate-binding pocket of MAO-B. 'Moulding' of the substrate/inhibitor binding region by superposition of effective MAO-A inhibitors from various groups of chemicals allowed the shape of substrate/inhibitor binding region to be visualised. 'Removal of contents' from this mould yielded a cavity, which corresponded to the shape of substrate/inhibitor binding region. Such cavity can be used to evaluate the most probable positions known inhibitors take in binding to it. The docking procedure can also be used for searching molecular databases for new inhibitors. Pilot experiments revealed that relatively rigid compounds, which did not fit to this cavity, were poor inhibitors of MAO-A.

Photoaffinity ligands in the study of cytochrome p450 active site structure.

While photoaffinity ligands have been widely used to probe the structures of many receptors and nucleic acid binding proteins, their effective use in the study of cytochrome p450 structure is less established. Nevertheless, significant advances in this field have been made since the technique was first applied to p450cam in 1979. In several cases, especially studies involving p450s of the 1A and 2B families, peptides covalently modified with photoaffinity ligands have been isolated and characterized. Some of these peptides were predicted by molecular modeling to line substrate binding regions of the enzymes. Other data obtained from such studies were more difficult to reconcile with theory. This review addresses the status of photoaffinity labeling as a tool for studying cytochrome p450 structure. In addition, potential future directions in this field are discussed, including the development of heme-directed agents and validation of their effectiveness as photoaffinity ligands using sperm whale myoglobin as a test protein. The potential for hydroxyaromatic compounds to serve as photoactivated probes of active site nucleophiles is also discussed. This class of compounds and its derivatives has long been known in the fields of photochemistry and photophysics to be precursors of reactive radicals and quinone methides that are likely to serve as effective active site probes of the p450s.

The Crystal Structure of R-specific Alcohol Dehydrogenase from Lactobacillus brevis Suggests the Structural Basis of its Metal Dependency

The crystal structure of the apo-form of an R-specific alcohol dehydrogenase from Lactobacillus brevis (LB-RADH) was solved and refined to 1.8 Å resolution. LB-RADH is a member of the short-chain dehydrogenase/reductase (SDR) enyzme superfamily. It is a homotetramer with 251 amino acid residues per subunit and uses NADP(H) as co-enzyme. NADPH and the substrate acetophenone were modelled into the active site. The enantiospecificity of the enzyme can be explained on the basis of the resulting hypothetical ternary complex. In contrast to most other SDR enzymes, the catalytic activity of LB-RADH depends strongly on the binding of Mg 2+. Mg 2+ removal by EDTA inactivates the enzyme completely. In the crystal structure, the Mg 2+-binding site is well defined. The ion has a perfect octahedral coordination sphere and occupies a special position concerning crystallographic and molecular point symmetry, meaning that each RADH tetramer contains two magnesium ions. The magnesium ion is no direct catalytic cofactor. However, it is structurally coupled to the putative C-terminal hinge of the substrate-binding loop and, via an extended hydrogen bonding network, to some side-chains forming the substrate binding region. Therefore, the presented structure of apo-RADH provides plausible explanations for the metal dependence of the enzyme.

Comparison of Full-atomic and Coarse-grained Models to Examine the Molecular Fluctuations of c-AMP Dependent Protein Kinase

Molecular fluctuations of the native conformation of c-AMP dependent protein kinase (cAPK) have been investigated with three different approaches. The first approach is the full atomic normal mode analysis (NMA) with empirical force fields. The second and third approaches are based on a coarse-grained model with a single single-parameter- harmonic potential between close residues in the crystal structure of the molecule without any residue specificity. The second method calculates only the magnitude of fluctuations whereas the third method is developed to find the directionality of the fluctuations which are essential to understand the functional importance of biological molecules. The aim, in this study, is to determine whether using such coarse-grained models are appropriate for elucidating the global dynamic characteristics of large proteins which reduces the size of the system at least by a factor of ten. The mean-square fluctuations of Cα atoms and the residue cross-correlations are obtained by three approaches. These results are then compared to test the results of coarse grained models on the overall collective motions. AH three of the approaches show that highly flexible regions correspond to the activation and solvent exposed loops, whereas the conserved residues (especially in substrate binding regions) exhibit almost no flexibility, adding stability to the structure. The anti-correlated motions of the two lobes of the catalytic core provide flexibility to the molecule. High similarities among the results of these methods indicate that the slowest modes governing the most global motions are preserved in the coarse grained models for proteins. This finding may suggest that the general shapes of the structures are representative of their dynamic characteristics and the dominant motions of protein structures are robust at coarse-grained levels.

Alpha-crystallin regions affected by adenosine 5'-triphosphate identified by hydrogen-deuterium exchange.

ATP interaction with lens alpha-crystallins leading to enhanced chaperone activity is not yet well understood. One model for chaperone activity of small heat shock proteins proposes that ATP causes small heat shock proteins to release substrates, which are then renatured by other larger heat shock proteins. A similar role has been proposed for ATP in alpha-crystallin chaperone activity. To evaluate this model, ATP-induced structural changes of native human alpha-crystallin assemblies were determined by hydrogen-deuterium exchange. In these experiments, hydrogen-deuterium exchange, measured by mass spectrometry, gave direct evidence that ATP decreases the accessibility of amide hydrogens in multiple regions of both alphaA and alphaB. The surface encompassed by these regions is much larger than would be shielded by a single ATP, implying that multiple ATP molecules bind to each subunit and/or ATP causes a more compact alpha-crystallin structure. Such a conformational change could release a bound substrate. The regions most affected by ATP are near putative substrate binding regions of alphaA and alphaB and in the C-terminal extension of alphaB. The widespread decrease in hydrogen-deuterium exchange with particularly large decreases near substrate binding regions suggests that ATP releases substrates via both direct displacement and a global conformational change.

Lysine 152 of MuLV reverse transcriptase is required for the integrity of the active site.

Comparison of the three-dimensional structure of the active sites of MuLV and HIV-1 reverse transcriptases shows the presence of a lysine residue (K152) in the substrate-binding region in MuLV RT, while its equivalent position in HIV-1 RT is occupied by a glycine (G112). To investigate the role of K152 in the mechanism of the polymerase reaction catalyzed by MuLV RT, four mutant RTs, namely, K152A, K152R, K152E, and K152G, were generated and biochemically characterized. All muteins exhibited reduced polymerase activity on both RNA and DNA template-primers with K152E being the most defective. The template-primer binding affinity and the processivity of DNA synthesis, however, remained unchanged. The steady-state kinetic characterization showed little change in K(m.dNTP) (except for that of K152E) and an approximately 3-10-fold decrease in k(cat) depending upon the template-primer and mutational substitutions. The ddNTP resistance patterns were unchanged for all muteins, suggesting no participation of K152 in ddNTP recognition. The ability of individual muteins to add dNTP on the covalently cross-linked enzyme-template-primer complex was significantly decreased. These results together with the analysis of the ion pairs in the catalytic apparatus of MuLV RT suggest that K152 participates in maintaining the integrity of the active site of MuLV RT. Examination of the prepolymerase ternary complex formation showed that neither the wild type nor any of the K152 muteins of MuLV RT are capable of forming stable ternary complexes. This property is in contrast to that of HIV-1 RT, which readily forms stable ternary complexes under similar conditions. These results further indicate that the catalytic mechanism of MuLV RT is significantly different from that of HIV-1 RT, despite the presence of a number of conserved motifs and amino acid residues.

Hexameric Ring Structure of the ATPase Domain of the Membrane-Integrated Metalloprotease FtsH from Thermus thermophilus HB8

FtsH is a cytoplasmic membrane-integrated, ATP-dependent metalloprotease, which processively degrades both cytoplasmic and membrane proteins in concert with unfolding. The FtsH protein is divided into the N-terminal transmembrane region and the larger C-terminal cytoplasmic region, which consists of an ATPase domain and a protease domain. We have determined the crystal structures of the Thermus thermophilus FtsH ATPase domain in the nucleotide-free and AMP-PNP- and ADP-bound states, in addition to the domain with the extra preceding segment. Combined with the mapping of the putative substrate binding region, these structures suggest that FtsH internally forms a hexameric ring structure, in which ATP binding could cause a conformational change to facilitate transport of substrates into the protease domain through the central pore.

Multiple phosphoinositide 3-kinase-dependent steps in activation of protein kinase B.

The protein kinase B (PKB)/Akt family of serine kinases is rapidly activated following agonist-induced stimulation of phosphoinositide 3-kinase (PI3K). To probe the molecular events important for the activation process, we employed two distinct models of posttranslational inducible activation and membrane recruitment. PKB induction requires phosphorylation of two critical residues, threonine 308 in the activation loop and serine 473 near the carboxyl terminus. Membrane localization of PKB was found to be a primary determinant of serine 473 phosphorylation. PI3K activity was equally important for promoting phosphorylation of serine 473, but this was separable from membrane localization. PDK1 phosphorylation of threonine 308 was primarily dependent upon prior serine 473 phosphorylation and, to a lesser extent, localization to the plasma membrane. Mutation of serine 473 to alanine or aspartic acid modulated the degree of threonine 308 phosphorylation in both models, while a point mutation in the substrate-binding region of PDK1 (L155E) rendered PDK1 incapable of phosphorylating PKB. Together, these results suggest a mechanism in which 3' phosphoinositide lipid-dependent translocation of PKB to the plasma membrane promotes serine 473 phosphorylation, which is, in turn, necessary for PDK1-mediated phosphorylation of threonine 308 and, consequentially, full PKB activation.

The Crystal Structure of Human α1-Tryptase Reveals a Blocked Substrate-binding Region

Human mast cell tryptases represent a subfamily of trypsin-like serine proteinases implicated in asthma. Unlike β-tryptases, α-tryptases apparently are proteolytically inactive. We have solved the 2.2 Å crystal structure of mature human α1-tryptase. It reveals a frame-like tetrameric architecture that, surprisingly, does not require heparin-binding for stability. In marked contrast to β2-tryptase, the Ser214-Gly219 segment, which normally provides the template for substrate binding, is kinked in α-tryptase, thereby blocking its non-primed subsites. This so far unobserved subsite distortion is incompatible with productive substrate binding and processing. α-Tryptase apparently is trapped in this off-conformation by repulsions and attractions of the Asp216 side-chain. However, proteolytic activity could be generated by an induced-fit mechanism.

Crystal Structure of the CCTγ Apical Domain: Implications for Substrate Binding to the Eukaryotic Cytosolic Chaperonin

The chaperonin containing TCP-1 (CCT, also known as TRiC) is the only member of the chaperonin family found in the cytosol of eukaryotes. Like other chaperonins, it assists the folding of newly synthesised proteins. It is, however, unique in its specificity towards only a small subset of non-native proteins. We determined two crystal structures of mouse CCTγ apical domain at 2.2Å and 2.8Å resolution. They reveal a surface patch facing the inside of the torus that is highly evolutionarily conserved and specific for the CCTγ apical domain. This putative substrate-binding region consists of predominantly positively charged side-chains. It suggests that the specificity of this apical domain towards its substrate, partially folded tubulin, is conferred by polar and electrostatic interactions. The site and nature of substrate interaction are thus profoundly different between CCT and its eubacterial homologue GroEL, consistent with their different functions in general versus specific protein folding assistance.

How does the mitochondrial ADP/ATP carrier distinguish transportable ATP and ADP from untransportable AMP and GTP?Dynamic modeling of the recognition/translocation process in the major substrate binding region

To understand the transport mechanism of the bovine heart mitochondrial ADP/ATP carrier at the atomic level, we studied the four-dimensional features of the interaction of various purine nucleotides with the adenine nucleotide binding region (ABR) consisting of Arg 151-Asp 167 in the second loop facing the matrix side. After three-dimensional modeling of ABR based on the experimental results, its structural changes on interaction with purine nucleotides were examined by molecular dynamics computation at 300 K. ATP/ADP were translocated to a considerable degree from the matrix side to the inner membrane region accompanied by significant backbone conformational changes, whereas neither appreciable translocation nor a significant conformational change was observed with the untransportable nucleotides AMP/GTP. The results suggested that binding of the terminal phosphate group and the adenine ring of ATP/ADP with Arg 151 and Lys 162, respectively, and subsequent interaction of a phosphate group(s) other than the terminal phosphate with Lys 162 triggered the expansion and subsequent contraction of the backbone conformation of ABR, leading to the translocation of ATP/ADP. Based on a simplified molecular dynamic simulation, we propose a dynamic model for the initial recognition process of ATP/ADP with the carrier.

Crystals of Peptide Deformylase from Plasmodium falciparum Reveal Critical Characteristics of the Active Site for Drug Design

Peptide deformylase catalyzes the deformylation reaction of the amino terminal fMet residue of newly synthesized proteins in bacteria, and most likely in Plasmodium falciparum, and has therefore been identified as a potential antibacterial and antimalarial drug target. The structure of P. falciparum peptide deformylase, determined at 2.8 Å resolution with ten subunits per asymmetric unit, is similar to the bacterial enzyme with the residues involved in catalysis, the position of the bound metal ion, and a catalytically important water structurally conserved between the two enzymes. However, critical differences in the substrate binding region explain the poor affinity of E. coli deformylase inhibitors and substrates toward the Plasmodium enzyme. The Plasmodium structure serves as a guide for designing novel antimalarials.