Ligand Substitution Research Articles

In situ meso-tetra (4-carboxyphenyl) porphyrin ligand substitution in Hf-MOF for enhanced catalytic activity and stability in photoredox reactions

In situ meso-tetra (4-carboxyphenyl) porphyrin ligand substitution in Hf-MOF for enhanced catalytic activity and stability in photoredox reactions

Unveiling Mechanistic Complexity in Manganese-Catalyzed C-H Bond Functionalization Using IR Spectroscopy Over 16 Orders of Magnitude in Time.

ConspectusAn understanding of the mechanistic processes that underpin reactions catalyzed by 3d transition metals is vital for their development as potential replacements for scarce platinum group metals. However, this is a significant challenge because of the tendency of 3d metals to undergo mechanistically diverse pathways when compared with their heavier congeners, often as a consequence of one-electron transfer reactions and/or intrinsically weaker metal-ligand bonds. We have developed and implemented a new methodology to illuminate the pathways that underpin C-H bond functionalization pathways in reactions catalyzed by Mn-carbonyl compounds. By integrating measurements performed on catalytic reactions with in situ reaction monitoring and state-of-the-art ultrafast spectroscopic methods, unique insight into the mode of action and fate of the catalyst have been obtained.Using a combination of time-resolved spectroscopy and in situ low-temperature NMR studies, we have shown that photolysis of manganese-carbonyl precatalysts results in rapid (<5 ps) CO dissociation─the same process that occurs under thermal catalytic conditions. This enabled the detection of the key states relevant to catalysis, including solvent and alkyne complexes and their resulting transformation into manganacycles, which results from a migratory insertion reaction into the Mn-C bond. By systematic variation of the substrates (many of which are real-world structurally diverse substrates and not simple benchmark systems) and quantification of the resulting rate constants for the insertion step, a universal model for this migratory insertion process has been developed. The time-resolved spectroscopic method gave insight into fundamental mechanistic pathways underpinning other aspects of modern synthetic chemistry. The most notable was the first direct experimental observation of the concerted metalation deprotonation (CMD) mechanism through which carboxylate groups are able to mediate C-H bond activation at a metal center. This step underpins a host of important synthetic applications. This study demonstrated how the time-resolved multiple probe spectroscopy (TRMPS) method enables the observation of mechanistic process occurring on time scales from several picoseconds through to μs in a single experiment, thereby allowing the sequential observation of solvation, ligand substitution, migratory insertion, and ultimate protonation of a Mn-C bond.These studies have been complemented by an investigation of the "in reaction flask" catalyst behavior, which has provided additional insight into new pathways for precatalyst activation, including evidence that alkyne C-H bond activation may occur before heterocycle activation. Crucial insight into the fate of the catalyst species showed that excess water played a key role in deactivation to give higher-order hydroxyl-bridged manganese carbonyl clusters, which were independently found to be inactive. Traditional in situ IR and NMR spectroscopic analysis on the second time scale bridges the gap to the analysis of real catalytic reaction systems. As a whole, this work has provided unprecedented insight into the processes underpinning manganese-catalyzed reactions spanning 16 orders of magnitude in time.

From the Iron Pentacarbonyl Cation to Heteroleptic η6-arene Carbonyls and bis-η6-arene Cations.

Partial ligand substitution at the iron pentacarbonyl radical cation generates novel half-sandwich complexes of the type [Fe(η6-arene)(CO)2]⋅+ (arene=1,3,5-tri-tert-butylbenzene, 1,3,5-trimethylbenzene, benzene and fluorobenzene). Of those, the bulkier 1,3,5-tri-tert-butylbenzene (mes*) derivative [Fe(mes*)(CO)2]⋅+ was fully characterized by XRD analysis, IR, NMR, cw-EPR, Mössbauer spectroscopy and cyclic voltammetry as the [Al(ORF)4]- (RF=C(CF3)3) salt. Chemical electronation, i. e., the single electron reduction, with decamethylferrocene generates neutral [Fe(mes*)(CO)2], whereas further deelectronation under CO-pressure leads to a dicationic three-legged [Fe(mes*)(CO)3]2+ salt with [Al(ORF)4]- counterion. The full substitution of the carbonyl ligands in [Fe(CO)5]⋅+[Al(ORF)4]- mainly resulted in disproportionation reactions, giving solid Fe(0) and the dicationic bis-arene salts [Fe(η6-arene)2]2+([Al(ORF)4]-)2 (arene=1,3,5-trimethylbenzene, benzene and fluorobenzene). Only by employing the very large fluoride bridged anion [F-{Al(ORF)3}2]-, it was possible to isolate an open shell bis-arene cation salt [Fe(C6H6)2]⋅+[F-{Al(ORF)3}2]-. The highly reactive cation was characterized by XRD analysis, cw-EPR, Mössbauer spectroscopy and cyclic voltammetry. The disproportionation of [Fe(C6H6)2]⋅+ salts to give solid Fe(0) and [Fe(C6H6)2]2+ salts was analyzed by a suitable cycle, revealing that the thermodynamic driving force for the disproportionation is a function of the size of the anion used and the polarity of the solvent.

Iron-Based nanoporous Metal-Organic frameworks with Side-Chain amino substituents for Efficiency-Regulated oxygen evolution reaction

Nanoporous iron-based MOFs, possessing notable attributes such as adjustable structure, considerable porosity, and large surface area, exhibit considerable promise for various applications in the field of photocatalysis. However, the effect of the ligand substitution ratio on the photocatalytic reaction process is currently unknown. In the current investigation, a series of iron-based MOFs MIL-101(Fe)-X with various ratios of amino substituents (X = H: NH2 = 1:0, 1:0.5, 1:1, 1:2, 1:4, 0:1) were synthesized using the solvothermal method. The morphology and structure were characterized using SEM, TEM, XRD, XPS, BET, FT-IR, etc. Their efficacy as water oxidation catalysts under AM1.5G (solar light) irradiation was investigated. The findings of the study indicated that MIL-101(Fe) with an X value of 1:2 exhibited the highest surface area of 380.4 m2/g. This resulted in the exposure of a greater number of active sites, leading to enhanced charge separation efficiency and exceptional oxygen evolution activity when illuminated by simulated sunlight. The oxygen evolution rate under solar light was measured to be 11.7 mmol·h−1·g−1. This research confirmed the effect of substituent variation on the oxygen evolution rate by modulating the substitution ratio of side-chain ligands on MOFs, thereby altering their microstructure and charge distribution. The incorporation of a suitable quantity of amino groups, that act as strong electron-donating groups, facilitated the effective separation of electron-hole pairs generated during the photocatalytic process. However, an excessive introduction of amino groups can result in a reduction in both pore structure and surface area, thereby impeding the efficiency of the photocatalytic oxygen evolution reaction.

Acetylene ligands stabilize atomically dispersed supported rhodium complexes under harsh conditions

Facile sintering of atomically dispersed supported noble metal catalysts at catalytically relevant temperatures, particularly under reducing conditions, poses a challenge for their practical applications. Some ligands, such as carbonyls, aid in improving the stability at the expense of severely suppressing the catalytic activity. Here, we demonstrate that substitution of the carbonyl ligands with reactive acetylene ligands can maintain the atomic dispersion of the supported mononuclear rhodium complex under harsh reducing conditions (>573 K), as confirmed by in-situ X-ray absorption near-edge structure (XANES) and extended X-ray absorption fine structure (EXAFS) spectroscopies. In contrast, the supported rhodium carbonyl complex aggregates into nanoclusters under identical conditions. Furthermore, our results indicate that the acetylene ligands provide this anti-sintering ability while retaining the hydrogenation activity.

Rapid separation of the low concentration Pd from Pd-Pt coexisting systems: Cyano-group’s monomer-specific affinity

Rapid separation of low concentration palladium (Pd) from Pd-Platinum (Pt) coexisting systems remains a formidable challenge, primarily due to the undifferentiated substitution of ligands in Pd/Pt complexes by adsorption sites. The development of an adsorbent featuring monomer-specific affinity adsorption sites for Pd/Pt could mitigate this drawback. Herein, Manganese hexacyanoferrate (MnHCF) possessing the sensitivity and specificity to Pd ions (Pd(II)) was synthesized via the facile co-precipitation method. MnHCF could rapidly and selectively capture 90.30 % of Pd(II) from a 10 ppm Pd-Pt coexisting system within just 5 min. Spectroscopic analyses and density functional theory (DFT) calculations indicated that cyano-group (CN) in MnHCF exhibited the monomer-specific affinity for targeted capturing Pd via the direct and strong coordination interaction (Fe-CN-PdCl2), which was co-determined by the electron-losing of C (0.06 e) and N (0.07 e) atom. At the same time, CN could neither react directly with the fully coordinated [PtCl6]2− species nor substitute the Cl− ligand, both of which contributed to the non-adsorption of Pt, thus triggering the Pd-Pt separation. This study provides a promising candidate adsorbent for practical applications in platinum group metals recovery by the design of adsorption sites with monomer-specific affinity.

Comprehensive Evaluation of Models for Ammonia Binding to the Oxygen Evolving Complex of Photosystem II.

The identity and insertion pathway of the substrate oxygen atoms that are coupled to dioxygen by the oxygen-evolving complex (OEC) remains a central question toward understanding Nature's water oxidation mechanism. In several studies, ammonia has been used as a small "water analogue" to elucidate the pathway of substrate access to the OEC and to aid in determining which of the oxygen ligands of the tetramanganese cluster are substrates for O-O bond formation. On the basis of structural and spectroscopic investigations, five first-sphere binding modes of ammonia have been suggested, involving either substitution of an existing H2O/OH-/O2- group or addition as an extra ligand to a metal ion of the Mn4CaO5 cluster. Some of these modes, specifically the ones involving substitution, have already been subject to spectroscopy-oriented quantum chemical investigations, whereas more recent suggestions that postulate the addition of ammonia have not been examined so far with quantum chemistry for their agreement with spectroscopic data. Herein, we use a common structural framework and theoretical methodology to evaluate structural models of the OEC that represent all proposed modes of first-sphere ammonia interaction with the OEC in its S2 state. Criteria include energetic, magnetic, kinetic, and spectroscopic properties compared against available experimental EPR, ENDOR, ESEEM, and EDNMR data. Our results show that models featuring ammonia replacing one of the two terminal water ligands on Mn4 align best with experimental data, while they definitively exclude substitution of a bridging μ-oxo ligand as well as incorporation of ammonia as a sixth ligand on Mn1 or Mn4.

Kinetics and mechanistic investigation of the substitution from dinuclear Pt(II) complexes bridged by N,N’-bis(2-pyridylcarboxamide)phenylenediamines

The rates of substitution of the chloride ligand in dinuclear complexes, [Pt2(N,N'-bis(2-pyridylcarboxamide)-1,3-phenylenediamine)Cl4] (1), [Pt2(N,N'-bis(2-pyridylcarboxamide)-1,4-phenylenediamine)Cl4] (2), [Pt2(N,N'-bis(3-isoquinolylcarboxamide)-1,3-phenylenediamine)Cl4] (3) and [Pt2(N,N'-bis(3-isoquinolylcarboxamide)-1,4-phenylenediamine)Cl4] (4), by three bio-relevant nucleophiles, thiourea (TU), N,N-dimethylthiourea (DMTU) and N,N,N’,N’-tetramethylthiourea (TMTU), were investigated. The mononuclear analogue [Pt(N-phenylpyridine-2-carboxamide)Cl2] (5) was included to compare the results. The kinetics of the reactions were studied under pseudo first-order conditions in a methanol solution (I = 0.1 M LiCl) as a function of concentration and temperature using the stopped-flow spectrophotometer. The observed pseudo first-order rate constants for the substitution reactions of all the complexes were calculated from two well-separated steps and obey the rate law k obs (1 st /2 nd ) = k 2 (1 st /2 nd )[Nu]. The reactivity of the complexes decreases in the order 2 > 1 > 4 > 3 > 5. The conformational symmetry of the complexes as controlled by the phenylenediamine bridges, steric hindrance due to the bridges as well as the σ-donor capacity of the coordinated groups around the metal centers influence the reactivity of the dinuclear complexes. The low enthalpy (ΔH #) and negative intrinsic entropy (ΔS #) values support an associative mechanism of substitution. The kinetic data are supported by DFT calculations.

The Role of the Lowest Excited Triplet State in Defining the Rate of Photoaquation of Hexacyanometalates.

Photosolvation is a type of ligand substitution reaction started by irradiation of a solution with light, triggering the replacement of a ligand with a molecule from the solvent. The excited state is created through many possible pathways. For the class of hexacyanides of groups 8 and 9 of the periodic table, irradiation in the ligand field band is followed by intersystem crossing to the lowest excited triplet state, which we propose to mediate the photoaquation reaction in this class of complexes. In this study, we present time-resolved X-ray absorption data showing indications of the triplet intermediate state in the cobalt(III) hexacyanide complex and we discuss general aspects of the photoaquation reaction in comparison with reported data on the isoelectronic iron(II) hexacyanide. Quantum chemical calculations are analyzed and suggest that the nature of the lowest excited triplet state in each complex can explain the drastically different rate of reactions observed.

Photo-responsive hydrogels based on a ruthenium complex: synthesis and degradation.

We report the synthesis of a photo responsive metallo-hydrogel based on a ruthenium(II) complex as a functional cross-linker. This metal complex contains reactive 4AAMP (= 4-(acrylamidomethyl)pyridine) ligands, which can be cleaved by light-induced ligand substitution. Ru[(bpy)2(4AAMP)2] cross-links 4-arm-PEG-SH macromonomers by thia-Michael-addition to the photocleavable 4AAMP ligand for the preparation of the hydrogel. Irradiation with green light at 529 nm leads to photodegradation of the metallo-hydrogel due to the ligand dissociation, which can be adjusted by adjusting the Ru[(bpy)2(4AAMP)2] concentration. The ligand substitution forming [Ru(bpy)2(L)2]2+ (L = H2O and CH3CN) can be monitored by 1H NMR spectroscopy and UV-visible absorption. The control of degradation by light irradiation plays a significant role in modulating the elasticity and stiffness of the light sensitive metallo-hydrogel network. The photo-responsive hydrogel is a viable substrate for cell cultures.

Highly active chromium-based selective ethylene tri-/tetramerization catalysts supported by alkenylphosphanyl PNP ligands.

A series of novel diphosphinoamine (PNP) ligands bearing a P-alkenyl group were synthesized and applied in chromium-catalyzed selective ethylene tri-/tetramerization by in situ combination of Cr(acac)3 and modified methylalumoxane (MMAO-3A). The ligand substitution and oligomerization conditions have a remarkable influence on the catalytic activity and controllable selectivity. Most of these PNP ligands are highly active for ethylene tri-/tetramerization with considerable selectivity. An asymmetric diisopropenylphosphanyl ligand with an N-cyclohexyl group achieved the highest activity of 2036 kg (g Cr h-1)-1 with a high total selectivity of 81.1 wt% toward valuable 1-hexene (43.0 wt%) and 1-octene (38.1 wt%) at 40 bar ethylene and 60 °C. An asymmetric mixed isopropenyl/ethylphosphanyl ligand with an N-isopropyl group exhibited a high 1-octene selectivity of 65.5 wt% and a high total 1-hexene/1-octene selectivity (91.5 wt%) with a high activity of 1256 kg (g Cr h-1)-1.

Multi-phosphine-chelated iron-carbide clusters via redox-promoted ligand exchange on an inert hexa-iron-carbide carbonyl cluster, [Fe6(μ6-C)(μ2-CO)4(CO)12]2.

We report the reactivity, structures and spectroscopic characterization of reactions of phosphine-based ligands (mono-, di- and tri-dentate) with iron-carbide carbonyl clusters. Historically, the archetype of this cluster class, namely [Fe6(μ6-C)(μ2-CO)4(CO)12]2-, can be prepared on a gram-scale but is resistant to simple ligand substitution reactions. This limitation has precluded the relevance of iron-carbide clusters relating to organometallics, catalysis and the nitrogenase active site cluster. Herein, we aimed to derive a simple and reliable method to accomplish CO → L (where L = phosphine or other general ligands) substitution reactions without harsh reagents or multi-step synthetic strategies. Ultimately, our goal was ligand-based chelation of an Fe n (μ n -C) core to achieve more synthetic control over multi-iron-carbide motifs relevant to the nitrogenase active site. We report that the key intermediate is the PSEPT-non-conforming cluster [Fe6(μ6-C)(CO)16] (2: 84 electrons), which can be generated in situ by the outer-sphere oxidation of [Fe6(μ6-C)(CO)16]2- (1: closo, 86 electrons) with 2 equiv. of [Fc]PF6. The reaction of 2 with excess PPh3 generates a singly substituted neutral cluster [Fe5(μ5-C)(CO)14PPh3] (4), similar to the reported reactivity of the substitutionally active cluster [Fe5(μ5-C)(CO)15] with monodentate phosphines (Cooke & Mays, 1990). In contrast, the reaction of 2 with flexible, bidentate phosphines (DPPE and DPPP) generates a wide range of unisolable products. However, the rigid bidentate phosphine bis(diphenylphosphino)benzene (bdpb) disproportionates the cluster into non-ligated Fe3-carbide anions paired with a bdpb-supported Fe(ii) cation, which co-crystallize in [Fe3(μ3-CH)(μ3-CO)(CO)9]2[Fe(MeCN)2(bdpb)2] (6). A successful reaction of 2 with the tripodal ligand Triphos generates the first multi-iron-chelated, authentic carbide cluster of the formula [Fe4(μ4-C)(κ3-Triphos)(CO)10] (9). DFT analysis of the key (oxidized) intermediate 2 suggests that its (μ6-C)Fe6 framework remains fully intact but is distorted into an axially compressed, 'ruffled' octahedron distinct from the parent closo cluster 1. Oxidation of the cluster in non-coordinating solvent allows for the isolation and crystallization of the CO-saturated, intact closo-analogue [Fe6(μ6-C)(CO)17] (3), indicating that the intact (μ6-C)Fe6 motif is retained during initial oxidation with [Fc]PF6. Overall, we demonstrate that redox modulation beneficially 'bends' Wade-Mingo's rules via the generation of electron-starved (non-PSEPT) intermediates, which are the key intermediates in promoting facile CO → L substitution reactions in iron-carbide-carbonyl clusters.

Cluster dynamics of heterometallic trinuclear clusters during ligand substitution, redox chemistry, and group transfer processes.

Stepwise metalation of the hexadentate ligand tbsLH6 (tbsLH6 = 1,3,5-C6H9(NHC6H4-o-NHSiMe2tBu)3) affords bimetallic trinuclear clusters (tbsL)Fe2Zn(thf) and (tbsL)Fe2Zn(py). Reactivity studies were pursued to understand metal atom lability as the clusters undergo ligand substitution, redox chemistry, and group transfer processes. Chloride addition to (tbsL)Fe2Zn(thf) resulted in a mixture of species including both all-zinc and all-iron products. Addition of ArN3 (Ar = Ph, 3,5-(CF3)2C6H3) to (tbsL)Fe2Zn(py) yielded a mixture of two trinuclear products: (tbsL)Fe3(μ3-NAr) and (tbsL)Fe2Zn(μ3-NAr)(py). The two imido species were separated via crystallization, and outer sphere reduction of (tbsL)Fe2Zn(μ3-NAr)(py) resulted in the formation of a single product, [2,2,2-crypt(K)][(tbsL)Fe2Zn(μ3-NAr)]. These results provide insight into the relationship between heterometallic cluster structure and substitutional lability and could help inform both future catalyst design and our understanding of metal atom lability in bioinorganic systems.

Orthopalladated imidazolones and thiazolones: synthesis, photophysical properties and photochemical reactivity.

The reaction of Pd(OAc)2 with (Z)-5-arylidene-4-(4H)-imidazolones (2a-e) and (Z)-4-arylidene-5(4H)-thiazolones (3a-e) in trifluoroacetic acid results in the corresponding orthopalladated dinuclear complexes (4a-e, imidazolones; 11a-d, thiazolones) with trifluoroacetate bridges through regioselective C-H activation at the ortho position of the 4-arylidene group. Compound 4e, which contains an imidazolone substituted at 2- and 4-positions of the arylidene ring with methoxide groups and exhibits strong push-pull charge transfer, is an excellent precursor for the synthesis of fluorescent complexes with green yellowish emission and remarkable quantum yields. Breaking the bridging system with pyridine yields the mononuclear complex 5e (ΦF = 5%), while metathesis of trifluoroacetate ligands with chloride leads to the dinuclear complex 6e, also a precursor of fluorescent complexes by breaking the chloride bridging system with pyridine (7e, ΦF = 7%), or by substitution of chloride ligands with pyridine (8e, ΦF = 15%) or acetylacetonate (9e, ΦF = 2%). In addition to notable photophysical properties, dinuclear complexes 4 and 11 also exhibit significant photochemical reactivity. Thus, irradiation of orthopalladates 4a-c and 11a-c in CH2Cl2 with blue light (465 nm) proceeds via [2 + 2] photocycloaddition of the CC double bonds of imidazolone and thiazolone ligands, yielding the corresponding cyclobutane-bridging diaminotruxillic derivatives 10a-c and 12a-c, respectively.

Reactions of cyclonickelated complexes with hydroxylamines and TEMPO˙: isolation of new TEMPOH adducts of Ni(II) and their reactivities with nucleophiles and oxidants.

This contribution describes a study on the reactivities of the complexes [{κP,κC-(i-Pr)2PO-Ar}Ni(μ-Br)]2, 1a-d (Ar: C6H4, a; 3-Cl-C6H3, b; 3-OMe-C6H3, c; 4-OMe-napthalenyl, d), with hydroxylamines in the presence of TEMPO˙ (TEMPO˙ = (2,2,6,6-tetramethylpiperidinyl-1-yl)oxyl). The results of this study showed that treating 1a-d with a mixture of Et2NOH and TEMPO˙ did not afford the desired oxidation-induced functionalization of the Ni-aryl moiety in 1a-d, giving instead the corresponding κO-TEMPOH adducts [{κP,κC-(i-Pr)2PO-Ar}Ni(Br)(κO-TEMPOH)], 3a-d (TEMPOH = N-hydroxy-2,2,6,6-tetramethylpiperidine). The TEMPOH moiety in these zwitterionic compounds 3 can be displaced by a large excess of acetonitrile (MeCN), 10 equiv. of morpholine, or 1-2 equivalents of imidazole. Although these reactions have given the authenticated products [{κP,κC-(i-Pr)2PO-C6H4}Ni(Br)(NCMe)], 4a, [{κP,κC-(i-Pr)2PO-C6H4}Ni(Br)(morpholine)], 5a, and [{κP,κC-(i-Pr)2PO-C6H4}Ni(imidazole)2]Br, 6a, a few other products were also detected by NMR, indicating that the observed reactivities are far more complex than simple substitution of the TEMPOH moiety. Similarly, treating 3a with AgOC(O)CF3 results in the isolation of [{κP,κC-(i-Pr)2PO-C6H4}Ni{OC(O)CF3}(κO-TEMPOH)], 7a, arising from the substitution of the bromo ligand, whereas spectroscopic evidence suggests further reactivity, possibly including displacement of TEMPOH and oxidative decomposition.

Reactivity of Schiff base-[C,N,S] pincer palladacycles: hydrolysis renders singular trinuclear, tetranuclear, and heteropentanuclear Pd3W2 coordinated complexes.

Treatment of the Schiff base ligands a-f with Li2[PdCl4]/NaAcO in methanol under reflux gave the single nuclear palladacycles 1a-1f, with the metal atom bonded to a terdentate monoanionic [C,N,S] iminic ligand and to a chloride ligand that completes the palladium coordination sphere. Reaction of 1a-1c with silver perchlorate/triphenylphosphine in acetone at room temperature yielded the single nuclear complexes 2a-2c as the perchlorate salts, after substitution of the chloride ligand by a triphenylphosphine. However, reaction of a-c with Na2[PdCl4]/NaAcO in methanol at room temperature also gave compounds 1a-1c albeit contaminated with small amounts of the corresponding free aldehyde (mixture A). Reaction of mixture A with silver perchlorate/triphenylphosphine in acetone at room temperature gave analogously 2a-2c with some of the corresponding free aldehyde (mixture B). Attempts to purify mixtures A and B via recrystallization produced single crystals of 5 and 6 respectively: two serendipitously formed complexes, bearing thiomethyl aniline and/or acetate ligands, and void of aldehyde or iminic residue; the structures contain eight- and six-membered rings of alternating palladium and nitrogen atoms, respectively. To clarify this situation the aniline itself was reacted with palladium(II) acetate or with Na2[PdCl4]; in the latter case after recrystallization a unique behavior is revealed, giving rise to a tetranuclear complex containing a Pd4N4 ring with three differing coordination environments on the palladium atoms. Treatment of 1d with Ph2PCH2PPh2 (dppm)/AgClO4 or with Ph2PCH2(PPh2)W(CO)5/AgClO4 gave 3d, with a mono-coordinated dppm ligand, and 4d, respectively; complex 3d could not be converted into 4d by reaction with W(CO)5(THF). Recrystallization of 4d gave a still further noticeable species, complex 8: a pentanuclear trans-configured heterometallic mixed valent Pd(II)/W(0) linear complex with the palladium atoms supported by two acetate and two thiomethyl aniline bridging ligands. The complexes were fully characterized by microanalysis, IR, 1H, and 31P NMR spectroscopies, as appropriate. The X-ray single-crystal analyses for compounds 1b, 5, 6, 7 and 8 are described.

Antimicrobial and anticancer properties of carbon monoxide releasing molecules of the fac-[Re(CO)3(N-N)L]+ family.

The toxicity profile of fac-[Re(CO)3(N-N)L]+ complexes against microbial and tumoral cells has been extensively studied, primarily focusing on modifications to the bidentate diimine (N-N) ligand. However, less attention has been paid to modifications of the axial ligand L, which is perpendicular to the Re-N-N plane. This study reveals that the high toxicity of the fac-[Re(CO)3(bpy)(Ctz)]+ complex may be attributed to the structural effect of the trityl (CPh3) group present in clotrimazole, as removal of phenyl rings causes a significant decrease in the activity against Staphylococcus aureus (S. aureus). Moreover, substitution of the 1-tritylimidazole ligand by the structurally related ligands PPh3 and PCy3 maintains similarly high activity levels. These findings contribute to understanding the interactions of toxic complexes with bacterial membranes, suggesting that the ligand structures play a crucial role in inhibiting cell wall synthesis processes, potentially including Lipid II synthesis. Compounds with Ph3E (E = C-imidazole; P) groups also showed to be 10 times more toxic than cisplatin against three mammalian cell lines (IC50: 2-4 μM). In contrast, the analogue 1-benzylimidazole and 1-tert-butylimidazole derivatives were as toxic as cisplatin. We observed that the decomposition of the [Re(I)(CO)3] fragment inside mammalian cell lines liberates CO, which is expected to exert biological effects. Therefore, compounds of this family possessing the structural motif Ph3E seem to combine high antimicrobial and antitumoral activities, the latter being much higher than that of cisplatin.

Computational study of core modified dipyriamethyrin for the competitive complexation of Am3+/Cm3+ from their trichlorides.

In the process of handling and storage of radioactive actinides it is essential to selectively sequester the minor actinides, such as Am and Cm, through a competitive complexation process. Herein we computationally designed two core modified ligands (L21- and L3) through systematic oxygen substitution at the NH sites of dipyriamethyrin (L1_2H), a hexadentate expanded porphyrin, and studied their competitive complexation towards trivalent actinides (An = Am/Cm) from their trichlorides using density functional theory (DFT). We observed shorter An-N bonds and longer An-O bonds in complexes based on core modified ligands (L21- and L3). The An-Cl bond length increases with increasing axial coordination number (i.e., from L12- to L3) to accommodate the ligands. All the bonds were identified to be electrostatic in nature. L12- exhibits shorter bonds and larger bond orders on complexing with Am than with Cm. On moving from complexes of L21- to L3, the An-N bond lengths are shortened, while An-O bond lengths become larger. Between the complexes of Am and Cm, there is marginal difference in their bond distances with L21- and L3. Charge analysis shows ligand to metal charge transfer during coordination, with back-donation from An to N/O and Cl. The calculated spin-density analysis indicates that An remains in its trivalent oxidation state on complexation, while orbital occupation analysis shows that the 5f and 6d orbitals are involved in bonding; this was confirmed by molecular orbital (MO) analysis that shows the complexes of L21- and L3 to exhibit higher degeneracy in their overlapping MOs. Further, the energy decomposition analysis (EDA) confirms that all ionic bonds are primarily due to electrostatic contributions, where the orbital contributions increase from L12- to L3 complexes and maximum covalency was observed in Cm complexes due to the energy matching between the 5f orbitals of Cm and the 2p orbitals of N and Cl, compared to Am. To confirm the competitiveness in the complexation of the ligand towards Am vs. Cm, the thermodynamic parameters were analysed for the ligand and metal substitution reactions. L12- shows more affinity towards Am than Cm, while L21- and L3 prefer Cm.

Water stable colloidal PVP coated spin crossover nanoparticles.

Stable aqueous dispersions of spin-crossover (SCO) doped [FeII(Htrz)2(trz)](BF4) nanoparticles (NPs) were prepared by using water-soluble polyvinylpyrrolidone (PVP) as protecting polymer. The metal or ligand substitution percentage regulated the ultra-small size and morphology of the NPs. At the same time, the colloidal dispersions showed a complete conversion of the LS state to the HS state of the FeII ion.

Spectrophotometric quantification of biotin in drug formulations utilizing Pd(II) promoted ligand substitution approach in micellar medium

Spectrophotometric quantification of biotin in drug formulations utilizing Pd(II) promoted ligand substitution approach in micellar medium