Cl Substituents Research Articles

Synergy of atomic hydrogen reduction and reactive oxygen species oxidation over confined Mn bifunctional site for electrocatalytic deep mineralization

Traditional reduction or oxidation processes generating one−component free radicals face challenges in deep dechlorination and mineralization of chlorophenols from wastewater. Herein, an efficient electrocatalytic process has been developed, which couples atomic H* reduction with reactive oxidation species (•OH and 1O2) oxidation on a bifunctional cathode for 4 −chlorophenol (4 −CP) removal. The N − doped carbon nanotubes encapsulated manganese nanoparticles was fabricated as cathode, which could generate atomic H* , initiating nucleophilic hydrodechlorination in presence of confined MnO sites. Subsequently, electrophilic oxidation by generating mainly 1O2 on confined Mn7C3 sites and •OH on confined MnO sites, facilitating the oxidative processes. Experimental results and theory calculations demonstrated that reductive dechlorination and oxidative mineralization processes could mutually promote each other, resulting in an enhancement factor of 2.90. At pH 7, this process achieved 100 % removal for 4 −CP, 84 % dechlorination, 76 % total organic carbon (TOC) removal and low energy consumption (0.76 kWh g−1TOC) within 120 min. Notably, TOC for chlorophenols containing Cl substituents at different positions and real lake water containing 4 −CP could be almost completely removed. This research establishes confined non−noble bifunctional active sites that synergistically enhance reductive dechlorination and oxidative degradation processes, holding significant treatment potential for application in deep mineralization of organochlorine from water/wastewater.

Synthesis of New Chroman-4-one Based 1,2,3-Triazole Analogues as Antioxidant and Anti-Inflammatory Agents.

A library of new chroman-4-one based 1,2,3-triazole analogues were synthesized involving a series of condensation, cyclization, Suzuki coupling and copper catalysed click chemistry protocols. The newly synthesized compounds 8a-l were screened for their invitro antioxidant and anti-inflammatory activities by employing Ascorbic acid and Diclofenac as reference drugs respectively. The compound without any substituent on benzyl ring (8a), compound with -Cl substituent in para position of benzyl ring (8i), and compound with ethoxy substituent in para position of benzyl ring (8k) exhibited potent antioxidant and anti-inflammatory activities with higher percentage of inhibition. To understand their binding affinities, molecular docking study of these three compounds performed against NADPH oxidase with presented outstanding docking scores and promising binding interactions like H-bond and hydrophobic.

The synthesis, structure, and catalytic properties of Cl‐substituted tridentate ONO Schiff base molybdenum(VI) complexes: Expeditious synthesis of 1,8‐dioxo‐octahydro‐xanthene derivatives

A family of molybdenum complexes with a general formula of [MoO2L]2 have been synthesized and fully characterized, where L is a tridentate ONO Schiff base ligand featuring a Cl substituent in different positions on the aromatic ring of salicylidene‐2‐aminophenolato backbone. The solvent molecule stabilized the monomeric structure of [MoO2LD] (D = DMF or DMSO) allowing single‐crystal X‐ray diffraction of the three new complexes. The dimeric complexes are utilized to catalyze the reaction of aldehydes/ketones with dimedone, leading to 1,8‐dioxo‐octahydro‐xanthene derivatives in N,N‐dimethylformamide. We found that their catalytic activity is enhanced by the electron‐withdrawing group of the Cl substituent on the ONO ligand. In addition, the position of the Cl substituent can also positively influence the catalysis performance: (ortho (L1) > para (L3) > meta (L2) ≈ meta (L4)). The high efficiency of the catalysts promises high yields and selectivity with a low catalyst loading and allows a wide substrate scope of aldehydes/ketones for the reaction. In addition, the method employs recrystallization for purifying products and can be easily scaled up to gram levels, indicating a strong potential for industrial utilization.

Modular synthesis of pentacyclic-fused pyranoquinoliziniums as organelle-selective fluorescent probes

On basis of their unique chemical and photophysical properties, and excellent biological activities, quinoliziniums have been widely used in various research fields. Herein, modular synthetic strategies for efficient synthesis of novel fluorescent quinoliziniums by using one-pot and stepwise rhodium(III)-catalyzed C–H annulations were developed. In the one-pot synthesis, the reaction between 2-aryl-4-quinolones (1) and 1,2-diarylalkynes (2) proceeded in a chemo- and regioselective manner to give quinolinone-fused isoquinolines (3) and pentacyclic-fused pyranoquinoliziniums (4). The structural diversity of pentacyclic-fused pyranoquinoliziniums (4) was expanded by the stepwise synthesis from 3 and 2, allowing the strategic incorporation of electron-donating (OMe and OH) and electron-withdrawing (Cl) substituents on the top and bottom parts of the pyranoquinoliziniums (4). These newly synthesized pyranoquinoliziniums (4) exhibited tunable absorptions (455–532 nm), emissions (520–610 nm), fluorescence lifetime (0.3–5.6 ns), large Stokes shifts (up to 120 nm), and excellent fluorescence quantum yields (up to 0.73) upon adjusting the different substituents. The the unique arrangement of N and O atoms and extended π-conjugation of 4 could cause the relocation of HOMO comparing with our previous quinoliziniums. Importantly, pyranoquinoliziniums (4a-4g and 4i) targeted the mitochondria, while 4h was localized in lysosome. Due to the remarkable photophysical properties and the potential for organelle targeting of the novel class of quinoliziniums, they could be further applied for biological, chemical and material applications.

Interplay of Isomorphs and Polymorphs of Amidino-Copper(II) Complexes with Different Halides

To increase the number of potential materials for application as MRI contrast agents, several Cu(II) complexes were synthesized. Cu(II) complexes were chosen because they are less expensive in comparison with the presently used Gd(III), Mn(II) and other agents. Pyridine-2-carboximidamide (1), pyrimidine-2-carboximidamide (2) and pyrazole-2-carboximidamide (3) in the form of different salts along with CuCl2 and NaCl or CuBr2 and NaBr were used to obtain four Cu(II) complexes: dichloro-pyrimidine-2-carboximidamide copper(II) (4), dibromo-pyrimidine-2-carboximidamide copper(II) (5), dichloro-pirazole-2-carboximidamide copper(II) (6), and dibromo-pirazole-2-carboximidamide copper(II) (7). X-ray diffraction analysis revealed that molecular complexes 4–7 contain square planar coordinated Cu(II) atoms and their structures are very similar, as well as their packing in crystals, which allows us to consider them isomorphs. The same synthetic approach to complex preparation where NaCl or NaBr was not used brought us to the formation of dimeric complexes μ-chloro{chloro(pyridine-2-carboximidamide)copper(II)} (8) and μ-chloro{chloro(pyrimidine-2-carboximidamide)copper(II)} (9). In the dimeric complexes, two fragments which were the same as in monomeric complexes 4–7 are held together by bridging Cu-Cl bonds making the coordination of Cu equal to 5 (square pyramid). In dimeric complexes, axial Cu-Cl bonds are 2.7360 and 2.854 Å. These values are Cu-Cl bonds on the edge of existence according to statistical data from CSD. Synthesized complexes were characterized by IR spectroscopy, TGA, PXRD, EPR, and quantum chemical calculations. The higher thermal stability of monomer pyrimidine-based complexes with Cl and Br substituents makes them more prospective for further studies.

Photodegradation of polychlorinated biphenyls in water/nitrogen-doped silica and air/nitrogen-doped silica systems: Kinetics, mechanism and quantitative structure activity relationship (QSAR) analysis

Developing efficient and low-cost photocatalytic materials is essential for removing polychlorinated biphenyls (PCBs). In this work, the photodegradation process of fourteen representative polychlorinated biphenyls (PCBs) in both water/nitrogen-doped SiO2 (N-SiO2) and air/N-SiO2 systems was studied. The photodegradation kinetics of PCBs is consistent with the pseudo-first-order kinetic equation. The variation in the degradation effects of different PCBs in the two systems is primarily related to the position of the Cl substituent and the effective absorption wavelength range of PCBs. A total of fourteen intermediates for 4′-Dichlorobiphenyl (PCB-15), 2,2′,4,4′,6,6′-Hexachlorobiphenyl (PCB-155), and 2,2′,3,3′,4,4′,5,5′,6,6′-Decachlorobiphenyl (PCB-209) generated from four reaction pathways were identified based on both mass spectrometry analysis and theoretical calculations. Using the values of lnk (k denotes pseudo-first-order kinetic constants) for the 11 PCBs in the training set and the calculated molecular and structural parameters, quantitative structure-activity relationship (QSAR) models for the two systems were constructed by using multiple linear regression (MLR) method to better understand the factors affecting the photodegradation rate of PCBs. The QSAR equations were obtained with Cl atom substitution at position 3 (N3) as the main parameter, which were lnk = −1.98 - 0.19 N3 for the water/N-SiO2 system and lnk = −1.56 - 0.34 N3 for the air/N-SiO2 system, with the correlation coefficient (R2) of 0.66 and 0.73, leave-one-out cross-validation (Q2LOO) of 0.51 and 0.59, respectively, and bootstrapping validation coefficients (Q2BOOT) values of both 0.74, confirming that the models were well fitted and showed high robustness and prediction ability. This study provides valuable insights into photocatalytic degradation studies of PCBs.

Regulating the interface electron distribution of iron-based MOFs through ligand functionalization enables efficient peroxymonosulfate utilization and catalytic performance

Ligand functionalization is an effective way to endow Metal-organic frameworks (MOF) with versatility for multiple applications by introducing or displaying substituents without changing the origin framework. In this work, the original MIL-101(Fe) was modified by functional groups, including –NH2, –NO2, –CH3, and -Cl substituents. The Bader charge results and electron localization function (ELF) quantitatively indicated that the functional ligands with different properties can regulate the electron structure of transition-metal centers through interface-charge redistribution. Accompanying the higher adsorption and utilization rate of peroxymonosulfate (PMS), more than 96% of acetaminophen (APAP) was degraded with a mineralization rate of 40.17% under the NH2-BDC/PMS system. In terms of mechanism, the amino group not only accelerated the regeneration of Fe(II) via the NCFe electron-transfer path, but also stimulated the appearance of high-valent Fe species. Meanwhile, the degradation pathways of APAP were proposed by integrating the results of liquid chromatograph-mass spectrometry (LC-MS) and Frontier molecular-orbital theory. Finally, the NH2-BDC/PMS system reveals long-term stability, nonselectivity, low biotoxicity as well as secondary pollution for pollutant degradation, which is a considered candidate for further environmental applications.

Steric and electronic influence on Cu-Cu short contacts in β-thioketiminato tricopper(I) clusters.

A series of β-thioketiminate copper(I) complex trimers [LCuI]3 were synthesized by modifying the ligand framework with electron-withdrawing groups (F and Cl) or electron-donating groups (iPr and Me) at the N-aryl ring as well as with CF3 groups on the chelating backbone. This ligand modification significantly impacts the enhancement of Cu⋯Cu short contacts, which can be rationalized by using steric and electronic factors of the chelated ligand. We observed that this intramolecular cuprophilicity among [LCuI]3 complexes is primarily governed by the size of N-aryl ortho-substituents. These findings were well supported by X-ray crystallography, Raman spectroscopy, and Mayer bond order analysis. The electronic effects induced by the ligand modification on the LCuI fragment were investigated using CO and 2,4,6-CNC6H2Me3 as probe molecules. Corroborated by the FTIR and CV measurements, our results reveal that the β-thioketiminate SN chelators induce more pronounced changes in the electronic character of the LCuI fragment due to the presence of CF3 groups on the chelating backbone in comparison with the F or Cl substituents on the N-aryl ring.

Ionic liquid post-modified carboxylate-rich MOFs for efficient catalytic CO2 cycloaddition under solvent-free conditions.

The synthesis of cyclic carbonates through cycloaddition reactions between epoxides and carbon dioxide (CO2) is an important industrial process. Metal-Organic Frameworks (MOFs) have functional and ordered pore structures, making them attractive catalysts for converting gas molecules into valuable products. One approach to enhance the catalytic activity of MOFs in CO2 cycloaddition reactions is to create open metal sites within MOFs. In this study, the amino-functionalized rare earth Gd-MOF (Gd-TPTC-NH2) and its ionic liquid composite catalysts (Gd-TPTC-NH-[BMIM]Br) were synthesized using 2'-amino-[1,1':4',1''-terphenyl]-3,3'',5,5''-tetracarboxylic acid (H4TPTC-NH2) as the ligand. The catalytic performance of these two catalysts was observed in the cycloaddition reaction of CO2 and epoxides. Under the optimized reaction conditions, Gd-TPTC-NH-[BMIM]Br can effectively catalyze the cycloaddition reaction of a variety of epoxide substrates with good to excellent yields of cyclic carbonate products. Comparatively, epichlorohydrin and epibromohydrin, which possess halogen substituents, promote higher yields of cyclic carbonates due to the electron-withdrawing nature of Cl and Br substituents. Additionally, the Gd-TPTC-NH-[BMIM]Br catalyst demonstrated good recyclability and reproducibility, maintaining its catalytic activity without any changes in its structure or properties after five reuse cycles.

Fluorescent properties in solid-state and solution of novel tricyclic derivatives of chloro/bromophenylchromanones and 2-methylpyrazoline

In this work, we reported the synthesis and spectroscopic characterization of seven novel tricyclic compounds resulting from the reaction of 3-benzylidenechromanone with Cl or Br substituent in different positions and without halogen with methylhydrazine. The structural characterization of compounds was done through different techniques i.e., FTIR,1HNMR,a single and powder X-Ray diffraction. Moreover, fluorescence quantum yield and lifetime assessed their fluorescent properties in the solid state and various solvents. Derivatives with Cl or Br substituent in positions 2 and 4 are isostructural. 4-Cl, 4-Br and 3-Cl compounds exhibit fluorescence with moderate efficiency (quantum yield 0.11–0.26) in solid state due to specific arrangements, so-called π-stack brick stone with head-to-tail self-assembly. Other crystalline compounds (2-Cl, 2-Br and 3-Br) that exhibit negligible fluorescence quantum yield have crossed V-type arrangement. In the solution, the nonhalogenated compound shows the best fluorescence efficiency. In turn, the presence of halogen atoms results in fluorescence decreasing. TD-DFT study revealed that unsubstituted compound higher emissive in solution has a different electron density distribution at HOMO and LUMO levels than less emissive substituted compounds (A3 and A3).

Naphthalene Monoimides with Peri-Annulated Disulfide Bridge—Synthesis and Electrochemical Redox Activity

Nowadays, organosulfur compounds provide new options in the development of full organic ion batteries. However, many drawbacks (such as kinetics limitations during the reversible oxidation of disulfides with cleavage of S–S bond, as well as solubility in non-aqueous electrolytes) make their commercialization difficult. Herein, a new concept for the design of organosulfur compounds with regulated redox properties and limited solubility is proposed. As a proof-of-concept, we designed peri-disulfo-substituted 1,8-naphthalimide derivatives, in which the alkyl chain length and halogen substituents (Cl or Br) at positions 3 and 6 are varied. The compounds were synthesized by an originally developed procedure starting from tetrahalonaphthalic anhydride via nucleophilic substitution at both peri-positions in the respective imide. Using ionic liquid electrolyte, it was found that the new peri-dithiolo-1,8-naphthalimides can participate in n- and p-type redox reactions at about 2.0 V and above 4.0 V vs. Li/Li+, respectively. The redox potentials are sensitive mainly to whether Cl or Br substituents are available in the molecule architecture, while the alkyl chain length determines the kinetics of the redox reactions. Among all compounds, the chloro-substituted compound with the shorter alkyl chain displays the best kinetics for both low- and high-voltage redox reactions.

Steric congestion in heavy pnictines alters oxidative halogenation pathways

Dihalotriorganopnictoranes serve as important synthetic precursors in Group 15 chemistry, but the influence of the organic substituents on the synthesis and reactivity of these compounds remains underexplored for the heavy pnictogens. We recently reported the isolation of Dipp3Sb (Dipp = 2,6-diisopropylphenyl). The bulky Dipp substituents permit the isolation of monomeric tetrahedral stibine oxide Dipp3SbO, yet also allow for the formation of the trigonal bipyramidal Dipp3SbF2. We now report the isolation of a sterically crowded bismuthine, Dipp3Bi. Reaction between Dipp3Bi and XeF2 afforded Dipp3BiF2, which features a distorted trigonal bipyramidal geometry in the solid state. Reaction between Dipp3Bi and PhICl2 resulted in the generation of 1-chloro-2,6-diisopropylbenzene. Reaction between Dipp3Sb and PhICl2 resulted in the formation of Dipp3SbCl2, which features a square pyramidal geometry in the solid state. Mes3SbCl2, Mes3SbBr2, Mes3BiCl2, and Mes3BiBr2 (Mes = mesityl) were structurally characterized and all exhibit trigonal bipyramidal geometries in the solid state. Solution-phase spectroscopic measurements reflect the fluxionality of all of these molecules, but theoretical analyses in the gas phase suggest that the square pyramidal geometry of Dipp3SbCl2 is more thermodynamically favorable than the trigonal bipyramidal geometry, possibly due to the presence of intramolecular secondary interactions between the Dipp and Cl substituents. These results highlight the ability of Dipp substituents to alter reactivity pathways of heavy pnictines.

Selenoneine-inspired selenohydantoins with glutathione peroxidase-like activity

Chronic diseases such as cystic fibrosis, inflammatory bowel diseases, rheumatoid arthritis, and cardiovascular illness have been linked to a decrease in selenium levels and an increase in oxidative stress. Selenium is an essential trace element that exhibits antioxidant properties, with selenocysteine enzymes like glutathione peroxidase being particularly effective at reducing peroxides. In this study, a series of synthetic organoselenium compounds were synthesized and evaluated for their potential antioxidant activities. The new selenohydantoin molecules were inspired by selenoneine and synthesized using straightforward methods. Their antioxidant potential was evaluated and proven using classical radical scavenging and metal-reducing methods. The selenohydantoin derivatives exhibited glutathione peroxidase-like activity, reducing hydroperoxides. Theoretical calculations using Density Functional Theory (DFT) revealed the selenone isomer to be the only one occurring in solution, with selenolate as a possible tautomeric form in the presence of a basic species. Cytocompatibility assays indicated that the selenohydantoin derivatives were non-toxic to primary human aortic smooth muscle cells, paving the way for further biological evaluations of their antioxidant activity. The results suggest that selenohydantoin derivatives with trifluoro-methyl (-CF3) and chlorine (-Cl) substituents have significant activities and could be potential candidates for further biological trials. These compounds may contribute to the development of effective therapies for chronic diseases such cardiovascular diseases.

Thin Films of Chlorinated Vanadyl Phthalocyanines as Active Layers of Chemiresistive Sensors for the Detection of Ammonia.

Halogenated metal phthalocyanines are promising materials for the manufacture of active layers of chemiresistive sensors for the detection of various gases. Despite the high interest in such sensors, there are few systematic studies of the position of halogen substituents in phthalocyanine macroring on the chemiresistive response of their films to gases. In this work, we prepared and studied films of novel tetrachlorosubstituted vanadyl phthalocyanine derivatives with Cl substituents in the peripheral (VOPcCl4-p) and nonperipheral (VOPcCl4-np) positions of the phthalocyanine ring as active layers of chemiresistive sensors to reveal the effect of the position of substituents on their structure and sensor response to low concentrations of NH3. It was shown that the films of VOPcCl4-p exhibited a noticeably higher sensor response to NH3 than the VOPcCl4-np ones. The limit of detection of NH3 was 0.7 ppm. The sensing layers demonstrated a reversible sensor response at room temperature with fairly low response/recovery times. It was also demonstrated that NH3 can be detected in the presence of various interfering gases (CO2 and H2) and some volatile organic vapors, as well as in a mixture of gases with a composition close to exhaled air.

Terpolymerization and Regioisomerization Strategy to Construct Efficient Terpolymer Donors Enabling High-Performance Organic Solar Cells.

For the first time, we combined terpolymerization and regioisomerization strategies to develop novel polymer donors to overcome the difficulty of improving organic solar cells (OSCs) performance. Two novel isomeric units, TTO and TTI, were obtained and incorporated into the PM6 backbone via random copolymerization to form a series of terpolymers. Interestingly, we found that different chlorine (Cl) substituent positions can significantly change the molecular planarity and electrostatic potential (ESP) owing to the steric hindrance effect of the heavy Cl atom, which leads to different molecular aggregation behaviors and miscibility between the donor and acceptor. The TTO unit features a higher number of multiple S⋅⋅⋅O non-covalent interactions, more positive ESP, and fewer isomer structures than TTI. As a result, the terpolymer PM6-TTO-10 exhibited a much better molecular coplanarity, stronger crystallinity, more obvious aggregation behavior, and proper phase separation in the blend film, which are conducive to more efficient exciton dissociation and charge transfer. Consequently, the PM6-TTO-10:BTP-eC9-based OSCs achieved a champion power conversion efficiency (PCE) of 18.37% with an outstanding fill factor of 79.97%, which are among the highest values reported for terpolymer-based OSCs. This work demonstrates that terpolymerization combined with Cl regioisomerization is an efficient approach for achieving high-performance polymer donors. This article is protected by copyright. All rights reserved.

Development of Zeise's Salt Derivatives Bearing Substituted Acetylsalicylic Acid Substructures as Cytotoxic COX Inhibitors.

Zeise's salt derivatives of the potassium trichlorido[η2-((prop-2-en/but-3-en)-1-yl)-2-acetoxybenzoate]platinate(II) type (ASA-Prop-PtCl3/ASA-But-PtCl3 derivatives) were synthesized and characterized regarding their structure, stability, and biological activity. It is proposed that the leads ASA-Prop-PtCl3 and ASA-But-PtCl3 interfere with the arachidonic acid cascade as part of their mode of action to reduce the growth of COX-1/2-expressing tumor cells. With the aim to increase the antiproliferative activity by strengthening the inhibitory potency against COX-2, F, Cl, or CH3 substituents were introduced into the acetylsalicylic acid (ASA) moiety. Each structural modification improved COX-2 inhibition. Especially compounds with F substituents at ASA-But-PtCl3 reached the maximum achievable inhibition of about 70% already at 1 µM. The PGE2 formation in COX-1/2-positive HT-29 cells was suppressed by all F/Cl/CH3 derivatives, indicating COX inhibitory potency in cellular systems. The CH3-bearing complexes showed the highest cytotoxicity in COX-1/2-positive HT-29 cells with IC50 values of 16-27 µM. In COX-negative MCF-7 cells, they were 2-3-fold less active. These data clearly demonstrate that it is possible to increase the cytotoxicity of ASA-Prop-PtCl3 and ASA-But-PtCl3 derivatives by enhancing COX-2 inhibition.

Preparation of Laterally Chloro-Substituted Schiff Base Ester Liquid Crystals: Mesomorphic and Optical Properties

A new class of Schiff base/ester compounds: ICln, 4-((2′-chlorophenylimino)methyl)phenyl-4″-alkoxy benzoates, were synthesized and their mesophase characteristics and thermal behavior were evaluated. Differential scanning calorimetry (DSC) was used to study mesophase transitions, and polarized optical microscopy was carried out to identify the phases (POM). The results show that all compounds are monomorphic, and enantiotropic nematic (N) phases were seen at all side chains. It was found that lateral Cl atoms in the terminal benzene ring influence both conformation and mesomorphic properties. Comparisons between the present investigated lateral Cl derivatives and their laterally neat, as well as their isomeric, compounds have been briefly discussed. Results revealed that the insertion of lateral Cl substituent in the molecular structure impacts the type and stability of the formed mesophases. The exchanges of the ester-connecting moiety improve their thermal nematic stability than their previously prepared structurally isomeric derivatives. These compounds exhibit a broad absorption in the UV-Visible region, including a peak in UV region and a tail around 550 nm, and there were observed to be absorption tail increases and energy band gap decreases with the increase of the alkoxy side chain length. The photoluminescence (PL) intensity was noted to be quenched for the bulky alkoxy group ascribed to non-radiative recombination through the defect states. Moreover, time resolved fluorescence decay spectra reveal that both the radiative and non-radiative recombination lifetime increases with the increase of alkoxy side chain length.

Regioselective Derivatization of Silylated [20]Silafulleranes

Silafulleranes with endohedral Cl- ions are a unique, scarcely explored class of structurally well-defined silicon clusters and host-guest complexes. Herein, we report regioselective derivatization reactions on the siladodecahedrane [nBu4N][Cl@Si20(SiCl3)12Cl8] ([nBu4N][1]), which has its cluster surface decorated with 12 SiCl3 and 8 Cl substituents in perfect Th symmetry. The room-temperature reaction of [nBu4N][1] with excess iBu2AlH in ortho-difluorobenzene (oDFB) furnishes perhydrogenated [nBu4N][Cl@Si20(SiH3)12H8] ([nBu4N][2]) in 50% yield; the non-pyrophoric [2]- is the largest structurally authenticated (by X-ray diffraction) hydridosilane known to date. A simple switch from pure oDFB to an oDFB/Et2O solvent mixture suppresses core hydrogenation and results in the formation of [nBu4N][Cl@Si20(SiH3)12Cl8] ([nBu4N][3]). In addition to the exhaustive Cl/H exchange at all 44 Si-Cl bonds of [1]- and the regioselective 36-fold silyl group hydrogenation, we achieved the simultaneous introduction of Me substituents at all 8 SiCl vertices along with the conversion of all 12 SiCl3 to SiH3 groups by treating [nBu4N][1] with Me2AlH/Me3Al in oDFB ([nBu4N][Cl@Si20(SiH3)12Me8], [nBu4N][4]; 73%). Quantum-chemical free-energy calculations find an SN2-Si-type hydrogenation of the exohedral SiCl3 moieties in [1]- (trigonal-bipyramidal intermediate) slightly preferred over metathesis-like SNi-Si substitutions (four-membered transition state). Cage hydrogenation likely occurs via SNi-Si processes. The experimentally demonstrated influence of an Et2O co-solvent, which drastically increases the respective reaction barriers, is attributed to the increased stability of the resulting iBu2AlH-OEt2 adduct and its higher steric bulk compared to free iBu2AlH.

Effect of Chlorine Substituents on the Photovoltaic Properties of Monocyanated Quinoxaline-Based D–A-Type Polymers

A string of monocyanated quinoxaline (Qx)-based D-A-type polymers systematically decorated with electron-attracting chlorine (Cl) atoms was created for use in non-fullerene polymer solar cells (PSCs). First, coupling of the benzodithiophene (BDT) donor and Qx acceptor with the strong electron-attracting cyano (CN) unit at its 5-position yielded the monocyanated reference polymer PB-CNQ. Subsequently, the additional Cl atoms were separately or simultaneously incorporated into the thiophene side groups of the BDT donor and Qx acceptor to create other objective polymers, PBCl-CNQ, PB-CNQCl, and PBCl-CNQCl. The Cl substituents on the BDT donor and Qx acceptor are represented by the names of the polymers. Owing to the favorable contributions of Cl substituents, the inverted-type non-fullerene PSCs based on partially chlorinated PBCl-CNQ (12.80%) and PB-CNQCl (13.93%) exhibited better power conversion efficiencies (PCEs) than the device based on unchlorinated reference PB-CNQ (11.19%). However, a significantly reduced PCE of 9.84% was observed for the device based on PBCl-CNQCl, in which Cl atoms were loaded on both the BDT donor and Qx acceptor at the same time. Hence, these results reveal that optimization of the number and position of Cl substituents in monocyanated Qx-based polymers is essential for enhancing their photovoltaic nature through the synergistic effects between two strong electron-attracting CN and Cl substituents.

Synthesis and structures of diorganotin(IV) Schiff base complexes [R2Sn(L)Cl2] and their proliferative responses on breast cancer cells

The preparation and structural characterization in solution and the solid-state of five diorganotin(IV) complexes, namely [Me2Sn(L1)Cl2] (1), [Ph2Sn(L1)Cl2] (2), [Bn2Sn(L1)Cl2] (3), [Me2Sn(L2)Cl2] (4), [nBu2Sn(L2)Cl2] (5), [Ph2Sn(L2)Cl2] (6), and [Bn2Sn(L2)Cl2] (7), where L1 = (E)-N-(pyridin-2-ylmethylene)cyclopropanamine and L2 = (E)-N-(pyridin-2-ylmethylene)cyclohexanamine is reported. In all metal complexes the tin atoms have six-coordinate C2SnN2Cl2 environments, exhibiting two distinct configurations. Six of the seven metal complexes are related to cis-Platin concerning the distribution of the nitrogen and chlorine atoms around the metal center, with the organic substituents attached to tin occupying the axial sites. Meanwhile, the organic groups and chlorine atoms are exchanged in the diphenyltin derivative 6, giving a configuration with axial trans-oriented chlorine atoms. Aside from van der Waals contacts, the molecular arrangements in the 3D solid-state structures are controlled by weak C − H⋅⋅⋅Cl, C − H⋅⋅⋅π and/or π⋅⋅⋅π interactions, which are analyzed in a comparative manner using Hirshfeld surface and fingerprint plot analysis. Complexes 1–4, 6 and 7 were investigated by 1H, 13C and 119Sn NMR spectroscopy, with the latter confirming the hexacoordinate C2SnN2Cl2 arrangement is maintained in solution, although ligand exchange was evident for the dimethyltin complexes 1 and 4 at room temperature.The anti-proliferative activity of compounds 1–4, 6 and 7 was evaluated against the MCF-7 (human breast cancer) cell line and normal human peripheral blood lymphocytes (HPBLs) using the MTT (MTT = 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide) assay. Of these, the diphenyl-substituted tin compound 2 carrying a cyclopropyl substituent at the 2-pyridylimine ligand and exhibiting an orientation of the N and Cl substituents analogous to cis-Platin demonstrated the best activity with an IC50 value of 81.63 ± 1.2 µM. Importantly, the trans-complex 6 was significantly less active (IC50 = 347.68 µM). Microscopic and colorimetric studies confirmed the triggering of apoptosis for the cell death of MCF-7, consisting of a caspase-dependent intrinsic pathway as revealed by an immunoblot study.