Submicrometer Spatial Resolution Research Articles

Tuning Electronic and Functional Properties in Defected MoS2 Films by Surface Patterning of Sulphur Atomic Vacancies.

Defects are inherent in transition metal dichalcogenides and significantly affect their chemical and physical properties. In this study, surface defect electrochemical nanopatterning is proposed as a promising method to tune in a controlled manner the electronic and functional properties of defective MoS₂ thin films. Using parallel electrochemical nanolithography, MoS₂ thin films are patterned, creating sulphur vacancy-rich active zones alternated with defect-free regions over a centimetre scale area, with sub-micrometre spatial resolution. The patterned films display tailored optical and electronic properties due to the formation of sulphur vacancy-rich areas. Moreover, the effectiveness of defect nanopatterning in tuning functional properties is demonstrated by studying the electrocatalytic activity for the hydrogen evolution reaction.

Neural stimulation and modulation with sub-cellular precision by optomechanical bio-dart

Neural stimulation and modulation at high spatial resolution are crucial for mediating neuronal signaling and plasticity, aiding in a better understanding of neuronal dysfunction and neurodegenerative diseases. However, developing a biocompatible and precisely controllable technique for accurate and effective stimulation and modulation of neurons at the subcellular level is highly challenging. Here, we report an optomechanical method for neural stimulation and modulation with subcellular precision using optically controlled bio-darts. The bio-dart is obtained from the tip of sunflower pollen grain and can generate transient pressure on the cell membrane with submicrometer spatial resolution when propelled by optical scattering force controlled with an optical fiber probe, which results in precision neural stimulation via precisely activation of membrane mechanosensitive ion channel. Importantly, controllable modulation of a single neuronal cell, even down to subcellular neuronal structures such as dendrites, axons, and soma, can be achieved. This bio-dart can also serve as a drug delivery tool for multifunctional neural stimulation and modulation. Remarkably, our optomechanical bio-darts can also be used for in vivo neural stimulation in larval zebrafish. This strategy provides a novel approach for neural stimulation and modulation with sub-cellular precision, paving the way for high-precision neuronal plasticity and neuromodulation.

Label-free three-dimensional imaging and quantitative analysis of living fibroblasts and myofibroblasts by holotomographic microscopy.

Holotomography (HT) is a cutting-edge fast live-cell quantitative label-free imaging technique. Based on the principle of quantitative phase imaging, it combines holography and tomography to record a three-dimensional map of the refractive index, used as intrinsic optical and quantitative imaging contrast parameter of biological samples, at a sub-micrometer spatial resolution. In this study HT has been employed for the first time to analyze the changes of fibroblasts differentiating towards myofibroblasts - recognized as the main cell player of fibrosis - when cultured in vitro with the pro-fibrotic factor, namely transforming growth factor-β1. In parallel, F-actin, vinculin, α-smooth muscle actin, phospho-myosin light chain 2, type-1 collagen, peroxisome proliferator-activated receptor-gamma coactivator-1α expression and mitochondria were evaluated by confocal laser scanning microscopy. Plasmamembrane passive properties and transient receptor potential canonical channels' currents were also recorded by whole-cell patch-clamp. The fluorescence images and electrophysiological results have been compared to the data obtained by HT and their congruence has been discussed. HT turned out to be a valid approach to morphologically distinguish fibroblasts from well differentiated myofibroblasts while obtaining objective measures concerning volume, surface area, projection area, surface index and dry mass (i.e., the mass of the non-aqueous content inside the cell including proteins and subcellular organelles) of the entire cell, nuclei and nucleoli with the major advantage to monitor outer and inner features in living cells in a non-invasive, rapid and label-free approach. HT might open up new research opportunities in the field of fibrotic diseases. RESEARCH HIGHLIGHTS: Holotomography (HT) is a label-free laser interferometric imaging technology exploiting the intrinsic optical property of cells namely refractive index (RI) to enable a direct imaging and analysis of whole cells or intracellular organelles. HT turned out a valid approach to distinguish morphological features of living unlabeled fibroblasts from differentiated myofibroblasts. HT provided quantitative information concerning volume, surface area, projection area, surface index and dry mass of the entire fibroblasts/myofibroblasts, nuclei and nucleoli.

Improving Three-Photon Fluorescence of Near-Infrared Quantum Dots for Deep Brain Imaging by Suppressing Biexciton Decay.

Three-photon fluorescence microscopy (3PFM) is a promising brain research tool with submicrometer spatial resolution and high imaging depth. However, only limited materials have been developed for 3PFM owing to the rigorous requirement of the three-photon fluorescence (3PF) process. Herein, under the guidance of a band gap engineering strategy, CdTe/CdSe/ZnS quantum dots (QDs) emitting in the near-infrared window are designed for constructing 3PF probes. The formation of type II structure significantly increased the three-photon absorption cross section of QDs and caused the delocalization of electron-hole wave functions. The time-resolved transient absorption spectroscopy confirmed that the decay of biexcitons was significantly suppressed due to the appropriate band gap alignment, which further enhanced the 3PF efficiency of QDs. By utilizing QD-based 3PF probes, high-resolution 3PFM imaging of cerebral vasculature was realized excited by a 1600 nm femtosecond laser, indicating the possibility of deep brain imaging with these 3PF probes.

Time-resolved self-heating temperature measurements of AlInN/GaN HEMTs using CeO2 Raman micro-thermometers

The DC and RF electrical performance and reliability of GaN-based transistors depend on their thermal behavior. Therefore, measuring the self-heating temperature of these devices under real operating conditions with high accuracy is an important and challenging issue. For these reasons, we present a time-resolved thermometry technique to measure transient self-heating temperatures in semiconductor components by combining conventional Raman spectroscopy and CeO2 Raman micro-thermometers. Thus, the experimental GaN volumetric and surface self-heating temperatures measured for biased AlInN/GaN HEMTs in both DC and pulsed regime are reported with a submicrometer spatial resolution and a temperature resolution of about 5 °C. Likewise time-resolved self-heating temperature of drain contact surface has also been studied.

Direct imaging of shock wave splitting in diamond at Mbar pressure

Understanding the behavior of matter at extreme pressures of the order of a megabar (Mbar) is essential to gain insight into various physical phenomena at macroscales—the formation of planets, young stars, and the cores of super-Earths, and at microscales—damage to ceramic materials and high-pressure plastic transformation and phase transitions in solids. Under dynamic compression of solids up to Mbar pressures, even a solid with high strength exhibits plastic properties, causing the induced shock wave to split in two: an elastic precursor and a plastic shock wave. This phenomenon is described by theoretical models based on indirect measurements of material response. The advent of x-ray free-electron lasers (XFELs) has made it possible to use their ultrashort pulses for direct observations of the propagation of shock waves in solid materials by the method of phase-contrast radiography. However, there is still a lack of comprehensive data for verification of theoretical models of different solids. Here, we present the results of an experiment in which the evolution of the coupled elastic–plastic wave structure in diamond was directly observed and studied with submicrometer spatial resolution, using the unique capabilities of the x-ray free-electron laser (XFEL). The direct measurements allowed, for the first time, the fitting and validation of the 2D failure model for diamond in the range of several Mbar. Our experimental approach opens new possibilities for the direct verification and construction of equations of state of matter in the ultra-high-stress range, which are relevant to solving a variety of problems in high-energy-density physics.

Twist-Induced Modification in the Electronic Structure of Bilayer WSe2.

The recent discovery of strongly correlated phases in twisted transition-metal dichalcogenides (TMDs) highlights the significant impact of twist-induced modifications on electronic structures. In this study, we employed angle-resolved photoemission spectroscopy with submicrometer spatial resolution (μ-ARPES) to investigate these modifications by comparing valence band structures of twisted (5.3°) and nontwisted (AB-stacked) bilayer regions within the same WSe2 device. Relative to the nontwisted region, the twisted area exhibits pronounced moiré bands and ∼90 meV renormalization at the Γ-valley, substantial momentum separation between different layers, and an absence of flat bands at the K-valley. We further simulated the effects of lattice relaxation, which can flatten the Γ-valley edge but not the K-valley edge. Our results provide a direct visualization of twist-induced modifications in the electronic structures of twisted TMDs and elucidate their valley-dependent responses to lattice relaxation.

Sensing of Magnetic-Field Gradients with Nanodiamonds on Optical Glass-Fiber Facets.

We demonstrate a photonic sensor of the magnetic field and its gradients with remote readout. The sensor is based on optically detected magnetic resonance (ODMR) in nanodiamonds with nitrogen-vacancy color centers that are covalently attached as a thin film on one facet of an optical fiber bundle. By measuring ODMR signals from a group of individual fibers in an ∼0.5-mm-wide imaging bundle, differences of local magnetic field strengths and magnetic field gradients are determined across the plane of the bundle facet. The measured gradients are created by direct electric currents flowing in a wire placed near the nanodiamond film. The measurement enabled the determination of the net magnetic field corresponding to various current directions and their corresponding magnetic field gradients. This demonstration opens up a perspective for compact fiber-based endoscopy, with additional avenues for remote and sensitive magnetic field detection with submicrometer spatial resolution under ambient conditions.

3D Chemical Imaging by Fluorescence-detected Mid-Infrared Photothermal Fourier Light Field Microscopy.

Three-dimensional molecular imaging of living organisms and cells plays a significant role in modern biology. Yet, current volumetric imaging modalities are largely fluorescence-based and thus lack chemical content information. Mid-infrared photothermal microscopy as a chemical imaging technology provides infrared spectroscopic information at submicrometer spatial resolution. Here, by harnessing thermosensitive fluorescent dyes to sense the mid-infrared photothermal effect, we demonstrate 3D fluorescence-detected mid-infrared photothermal Fourier light field (FMIP-FLF) microscopy at the speed of 8 volumes per second and submicron spatial resolution. Protein contents in bacteria and lipid droplets in living pancreatic cancer cells are visualized. Altered lipid metabolism in drug-resistant pancreatic cancer cells is observed with the FMIP-FLF microscope.

Development of a laser-based angle-resolved-photoemission spectrometer with sub-micrometer spatial resolution and high-efficiency spin detection.

Angle-resolved photoemission spectroscopy with sub-micrometer spatial resolution (μ-ARPES), has become a powerful tool for studying quantum materials. To achieve sub-micrometer or even nanometer-scale spatial resolution, it is important to focus the incident light beam (usually from synchrotron radiation) using x-ray optics, such as the zone plate or ellipsoidal capillary mirrors. Recently, we developed a laser-based μ-ARPES with spin-resolution (LMS-ARPES). The 177nm laser beam is achieved by frequency-doubling a 355nm beam using a KBBF crystal and subsequently focused using an optical lens with a focal length of about 16mm. By characterizing the focused spot size using different methods and performing spatial-scanning photoemission measurement, we confirm the sub-micron spatial resolution of the system. Compared with the μ-ARPES facilities based on the synchrotron radiation, our LMS-ARPES system is not only more economical and convenient, but also with higher photon flux (>5 × 1013 photons/s), thus enabling the high-resolution and high-statistics measurements. Moreover, the system is equipped with a two-dimensional spin detector based on exchange scattering at a surface-passivated iron film grown on a W(100) substrate. We investigate the spin structure of the prototype topological insulator Bi2Se3 and reveal a high spin-polarization rate, confirming its spin-momentum locking property. This lab-based LMS-ARPES will be a powerful research tool for studying the local fine electronic structures of different condensed matter systems, including topological quantum materials, mesoscopic materials and structures, and phase-separated materials.

Dynamic correlations in lipid bilayer membranes over finite time intervals.

Recent single-molecule measurements [Schoch et al., Proc. Natl. Acad. Sci. U. S. A. 118, e2113202118 (2021)] have observed dynamic lipid-lipid correlations in membranes with submicrometer spatial resolution and submillisecond temporal resolution. While short from an instrumentation standpoint, these length and time scales remain long compared to microscopic molecular motions. Theoretical expressions are derived to infer experimentally measurable correlations from the two-body diffusion matrix appropriate for membrane-bound bodies coupled by hydrodynamic interactions. The temporal (and associated spatial) averaging resulting from finite acquisition times has the effect of washing out correlations as compared to naive predictions (i.e., the bare elements of the diffusion matrix), which would be expected to hold for instantaneous measurements. The theoretical predictions are shown to be in excellent agreement with Brownian dynamics simulations of experimental measurements. Numerical results suggest that the experimental measurement of membrane protein diffusion, in complement to lipid diffusion measurements, might help to resolve the experimental ambiguities encountered for certain black lipid membranes.

Label-free sub-micrometer 3D imaging of ciprofloxacin in native-state biofilms with cryo-time-of-flight secondary ion mass spectrometry

High spatial resolution mass spectrometry imaging has been identified as a key technology needed to improve understanding of the chemical components that influence antibiotic resistance within biofilms, which are communities of micro-organisms that grow attached to a surface. Time-of-flight secondary ion mass spectrometry (ToF–SIMS) offers the unique ability for label-free 3D imaging of organic molecules with sub-micrometer spatial resolution and high sensitivity. Several studies of biofilms have been done with the help of ToF–SIMS, but none of those studies have shown 3D imaging of antibiotics in native-state hydrated biofilms with cell-level resolution. Because ToF–SIMS measurements must be performed in a high-vacuum environment, cryogenic preparation and analysis are necessary to preserve the native biofilm structure and antibiotic spatial distribution during ToF–SIMS measurements. In this study, we have investigated the penetration of the antibiotic ciprofloxacin into Bacillus subtilis biofilms using sub-micrometer resolution 3D imaging cryo-ToF–SIMS. B. subtilis biofilms were exposed to physiologically relevant levels of ciprofloxacin. The treated biofilms were then plunge-frozen in liquid propane and analyzed with ToF–SIMS under cryogenic conditions. Multivariate analysis techniques, including multivariate curve resolution (MCR) and inverse maximum signal factor (iMSF) denoising, were used to aid analysis of the data and facilitate high spatial resolution 3D imaging of the biofilm, providing individually resolved cells and spatially resolved ciprofloxacin intensity at “real world” concentrations.Graphical

Alignment and use of microbeam with full-field x-ray microscopes.

Demonstration tests of the alignment of Fresnel zone plate focusing optics using a full-field x-ray microscope and microbeam x-ray diffraction measurements combined with the full-field x-ray microscope were performed. It was confirmed that the full-field x-ray microscope enables direct two-dimensional observation of a microbeam with sub-micrometer spatial resolution. This allowed visualization of the misalignment of the focusing optics, resulting in accurate alignment of the optics within a short time. In addition, the microscope could be used to observe the sample as well as the microbeam, which enabled clarification of the position and two-dimensional shape of the microbeam on the sample. This realized a measurement procedure that a 100-μm-size sample was imaged with sub-micrometer spatial resolution, and then, microbeam-use measurements were performed for only the region of interest determined by the microscope, which has been difficult with conventional microbeam applications. The combination of observations by a full-field x-ray microscope and measurements using a microbeam is expected to open a new style of measurement.

Label-free visualization of photosynthetic microbial biofilms using mid-infrared photothermal and autofluorescence imaging.

The formation of photosynthetic microbial biofilms comprising multispecies biomolecules, such as extracellular polymeric substances (EPSs), and microbial cells play pivotal roles in maintaining or stimulating their biological functions. Although there are numerous studies on photosynthetic microbial biofilms, the spatial distribution of EPS components that are vital for microbial biofilm formation, such as exopolysaccharides and proteins, is not well understood. Visualization of photosynthetic microbial biofilms requires label-free methods, because labelling EPSs results in structural changes or aggregation. Raman spectroscopy is useful for label-free visualization of biofilm constituents based on chemical contrast. However, interference resulting from the bright autofluorescence of photosynthetic molecules and the low detection efficiency of Raman scattering make visualization a challenge. Herein, we visualized photosynthetic microbial biofilms in a label-free manner using a super-resolution optical infrared absorption imaging technique, called mid-infrared photothermal (MIP) microscopy. By leveraging the advantages of MIP microscopy, such as its sub-micrometer spatial resolution, autofluorescence-free features, and high detection sensitivity, the distribution of cyanobacteria and their extracellular polysaccharides in the biofilm matrix were successfully visualized. This showed that cyanobacterial cells were aligned along acidic/sulfated polysaccharides in the extracellular environment. Furthermore, spectroscopic analyses elucidated that during formation of biofilms, sulfated polysaccharides initially form linear structures followed by entrapment of cyanobacterial cells. The present study provides the foundation for further studies on the formation, structure, and biological functions of microbial biofilms.

Real-time visualisation of ion exchange in molecularly confined spaces where electric double layers overlap.

Ion interactions with interfaces and transport in confined spaces, where electric double layers overlap, are essential in many areas, ranging from crevice corrosion to understanding and creating nano-fluidic devices at the sub 10 nm scale. Tracking the spatial and temporal evolution of ion exchange, as well as local surface potentials, in such extreme confinement situations is both experimentally and theoretically challenging. Here, we track in real-time the transport processes of ionic species (LiClO4) confined between a negatively charged mica surface and an electrochemically modulated gold surface using a high-speed in situ sensing Surface Forces Apparatus. With millisecond temporal and sub-micrometer spatial resolution we capture the force and distance equilibration of ions in the confinement of D ≈ 2-3 nm in an overlapping electric double layer (EDL) during ion exchange. Our data indicate that an equilibrated ion concentration front progresses with a velocity of 100-200 μm s-1 into a confined nano-slit. This is in the same order of magnitude and in agreement with continuum estimates from diffusive mass transport calculations. We also compare the ion structuring using high resolution imaging, molecular dynamics simulations, and calculations based on a continuum model for the EDL. With this data we can predict the amount of ion exchange, as well as the force between the two surfaces due to overlapping EDLs, and critically discuss experimental and theoretical limitations and possibilities.

Single chloroplast in folio imaging sheds light on photosystem energy redistribution during state transitions.

Oxygenic photosynthesis is driven by light absorption in photosystem I (PSI) and photosystem II (PSII). A balanced excitation pressure between PSI and PSII is required for optimal photosynthetic efficiency. State transitions serve to keep this balance. If PSII is overexcited in plants and green algae, a mobile pool of light-harvesting complex II (LHCII) associates with PSI, increasing its absorption cross-section and restoring the excitation balance. This is called state 2. Upon PSI overexcitation, this LHCII pool moves to PSII, leading to state 1. Whether the association/dissociation of LHCII with the photosystems occurs between thylakoid grana and thylakoid stroma lamellae during state transitions or within the same thylakoid region remains unclear. Furthermore, although state transitions are thought to be accompanied by changes in thylakoid macro-organisation, this has never been observed directly in functional leaves. In this work, we used confocal fluorescence lifetime imaging (FLIM) to quantify state transitions in single Arabidopsis (Arabidopsis thaliana) chloroplasts in folio with sub-micrometre spatial resolution. The change in excitation-energy distribution between PSI and PSII was investigated at a range of excitation wavelengths between 475 nm and 665 nm. For all excitation wavelengths, the PSI/(PSI + PSII) excitation ratio was higher in state 2 than in state 1. We next imaged the local PSI/(PSI + PSII) excitation ratio for single chloroplasts in both states. The data indicated that LHCII indeed migrates between the grana and stroma lamellae during state transitions. Finally, fluorescence intensity images revealed that thylakoid macro-organisation is largely unaffected by state transitions. This single chloroplast in folio imaging method will help in understanding how plants adjust their photosynthetic machinery to ever-changing light conditions.

3D Orientation Imaging of Polymer Chains with Polarization-Controlled Coherent Raman Microscopy

Despite the ubiquity of three-dimensional (3D) anisotropic materials, their 3D molecular alignment cannot be measured using conventional two-dimensional (2D) polarization imaging. Here, we present images of the 3D angles of molecular orientations with submicrometer spatial resolution acquired through polarization-controlled coherent anti-Stokes Raman scattering microscopy. The hyperspectral Raman data of a polyethylene (PE) film were converted into images, showing the polymer chains' 3D angles and order parameters. The 3D orientation images of PE chains in ring-banded spherulites show that the azimuthal angles of the chains are perpendicular to the crystal growth direction, while the out-of-plane angles display limited-range oscillations synchronous with ring banding. The prevailing crystal growth model of fully twisting lamellae is inconsistent with the observed restricted oscillations of the out-of-plane direction, which are unobservable through conventional 2D projected imaging. This high-resolution, label-free, quantitative imaging of 3D molecular orientation can become a standard measurement tool for the microscopic structures of complex synthetic and biological materials.

Self-stabilization of the equilibrium state in ferroelectric thin films

(K,Na)NbO3 is a lead-free and sustainable ferroelectric material with electromechanical parameters comparable to Pb(Zr,Ti)O3 (PZT) and other lead-based solid solutions. It is therefore a promising candidate for caloric cooling and energy harvesting applications. Specifically, the structural transition from the low-temperature Mc- to the high-temperature c-phase displays a rich hierarchical order of domains and superdomains, that forms at specific strain conditions. The relevant length scales are few tens of nanometers for the domain and few micrometers for the superdomain size, respectively. Phase-field calculations show that this hierarchical order adds to the total free energy of the solid. Thus, domains and their formation has a strong impact on the functional properties relevant for electrocaloric cooling or energy harvesting applications. However, monitoring the formation of domains and superdomains is difficult and requires both, high spatial and high temporal resolution of the experiment. Synchrotron-based time-resolved X-ray diffraction methods in combination with scanning imaging X-ray microscopy is applied to resolve the local dynamics of the domain morphology with sub-micrometer spatial and nanosecond temporal resolution. In this regime, the material displays a novel self-stabilization mechanism of the domain morphology, which may be a general property of first-order phase transitions.

Room-Temperature Oxygen Transport in Nanothin BixOySez Enables Precision Modulation of 2D Materials.

Oxygen conductors and transporters are important to several consequential renewable energy technologies, including fuel cells and syngas production. Separately, monolayer transition-metal dichalcogenides (TMDs) have demonstrated significant promise for a range of applications, including quantum computing, advanced sensors, valleytronics, and next-generation optoelectronics. Here, we synthesize a few-nanometer-thick BixOySez compound that strongly resembles a rare R3m bismuth oxide (Bi2O3) phase and combine it with monolayer TMDs, which are highly sensitive to their environment. We use the resulting 2D heterostructure to study oxygen transport through BixOySez into the interlayer region, whereby the 2D material properties are modulated, finding extraordinarily fast diffusion near room temperature under laser exposure. The oxygen diffusion enables reversible and precise modification of the 2D material properties by controllably intercalating and deintercalating oxygen. Changes are spatially confined, enabling sub-micrometer features (e.g., pixels), and are long-term stable for more than 221 days. Our work suggests few-nanometer-thick BixOySez is a promising unexplored room-temperature oxygen transporter. Additionally, our findings suggest that the mechanism can be applied to other 2D materials as a generalized method to manipulate their properties with high precision and sub-micrometer spatial resolution.

A diamond voltage imaging microscope

Technologies that capture the complex electrical dynamics occurring in biological systems, across fluid membranes and at solid–liquid interfaces are important for furthering fundamental understanding and innovation in diverse fields from neuroscience to energy storage. However, the capabilities of existing voltage imaging techniques utilizing microelectrode arrays, scanning probes or optical fluorescence methods are limited by resolution, scan speed and photostability, respectively. Here we report an optoelectronic voltage imaging system that overcomes these limitations by using nitrogen-vacancy defects as charge-sensitive fluorescent reporters embedded within a transparent semiconducting diamond device. Electrochemical tuning of the diamond surface termination enables photostable optical voltage imaging with a quantitative linear response at biologically relevant voltages and timescales. This technology represents a major step towards label-free, large-scale and long-term voltage recording of physical and biological systems with sub-micrometre spatial resolution.