Kinetic Studies Research Articles

HOO• as the Chain Carrier for the Autocatalytic Photooxidation of Benzylic Alcohols.

The oxidation of benzylic alcohols is an important transformation in modern organic synthesis. A plethora of photoredox protocols have been developed to achieve the aerobic oxidation of alcohols into carbonyls. Recently, several groups described that ultraviolet (UV) or purple light can initiate the aerobic oxidation of benzylic alcohols in the absence of an external catalyst, and depicted different mechanisms involving the photoinduction of •O2- as a critical reactive oxygen species (ROS). However, based on comprehensive mechanistic investigations, including control experiments, radical quenching experiments, EPR studies, UV-vis spectroscopy, kinetics studies, and density functional theory calculations (DFT), we elucidate here that HOO•, which is released via the H2O2 elimination of α-hydroxyl peroxyl radicals [ArCR(OH)OO•], serves as the real chain carrier for the autocatalytic photooxidation of benzylic alcohols. The mechanistic ambiguities depicted in the precedent literature are clarified, in terms of the crucial ROS and its evolution, the rate-limiting step, and the primary radical cascade. This work highlights the necessity of stricter mechanistic analyses on UV-driven oxidative reactions that involve aldehydes' (or ketones) generation.

Pancreatic lipase inhibitory and anti‐acne activity of Piper betle: Kinetic studies, in silico docking, and chemical characterization of bioactive compounds

AbstractLipases play important roles in obesity and skin infections. Piper betle (Piperaceae) is widely cultivated and used in daily life. It is a rich source of lead compounds used in skin infections. This study reveals anti‐acne and pancreatic lipase inhibitory potential of leaf extract of Piper betle using in‐vitro and in‐silico molecular docking. The inhibitory potential of 13 selected plant extracts was evaluated at various concentrations (5–25 µg/mL). Ethyl‐acetate extract of Piper betle with strong pancreatic lipase inhibitory activity was further fractionated by preparative thin layer chromatography and eluted bands showing strong inhibitory activity were characterized by high performance liquid chromatography and gas chromatography. The purified compounds, namely, anodendroside E,2‐monoacetate, and 5H‐cyclopropa (3, 4) benz (1, 2‐ejazulen‐5‐one), were identified and showed over 90% pancreatic lipase inhibition. The isolated compounds showed strong dose‐dependent inhibitory effects on Propionibacterium acnes. These observations were consistent with molecular docking studies, which showed that anodendroside E,2‐monoacetate binds to the allosteric site with a binding energy of –7.0 kcal/mol, and this binding site is stabilized by hydrogen and carbon hydrogen bonds contributed by Phe 354 and Asp130, ser103. These findings suggest that the pancreatic lipase inhibitory and anti‐acne effects of Piper betle are attributed to anodendroside E,2‐monoacetate.

Novel insights into acetylation kinetics in a continuous Flow milli-reactor for chemo-enzymatic separation of silybin A/B

AbstractThe separation of silybin A (SilA) and B (SilB) diastereomers in optically pure compounds is challenging due to their very similar physical and chemical properties. However, such separation is crucial for evaluating the biological activity of the diasteroisomers SilA and SilB, which show very different performance in pharmacological applications like treating prostate cancer, liver diseases, and Alzheimer’s disease. The most common isolation method is based on high-performance liquid chromatography, but it is slow and has a yield in pure SilB of hundreds of milligrams per day. An alternative chemo-enzymatic separation method, utilizing an immobilized lipase CALB catalyst to stereoselectively acetylate silybin B (1b), offers advantages in terms of higher productivity, selectivity, and scalability, particularly when applied in flow reactors. This study delves into the kinetics of Sil acetylation catalyzed by Novozym 435 in a continuous flow milli-reactor, investigated at various temperatures, volumetric flow rates, and Sil initial concentrations. It is noteworthy that, at the current state of the art, there is a lack of kinetic studies on this reaction, emphasizing the novelty and significance of this work. The kinetic and fluid dynamic parameters were estimated using a non-linear regression analysis of experimental data. The examined reaction showed a null apparent activation energy, explaining the temperature insensitivity of the final acetylated silybin B (1b) concentration. Furthermore, the decrease in steady-state concentrations of the acetylated products with increasing volumetric flow rates indicated that the reaction was occurring in a kinetic regime. Interestingly, a maximum starting Sil concentration was identified, above which there was no favorable impact on conversion.

Kinetics study of catalytic pyrolysis of polystyrene polymer using response surface method

Kinetics study of catalytic pyrolysis of polystyrene polymer using response surface method

Kinetic study of a conventional and ultrasound-assisted extraction of pectin from different plant-based side streams: Impact on pectin extraction yield, purity and molecular pectin structure

The time-dependency of both a conventional and ultrasound-assisted extraction (UAE) was studied for three biomasses, carrot pomace (CP), broccoli stems (BS) and pumpkin pomace (PP). Both extraction processes were performed completely analogous without and with ultrasound waves to unequivocally evaluate the effect of ultrasonication. Besides the pectin extraction yield (considering the yield and pectin purity), the composition and molecular structure of the extracted materials were also studied as a function of time. For all biomasses, UAE resulted in a(n) (slight) increase of the final pectin extraction yield, giving rise to the extraction of an additional 4.2, 5.8 and 10.7% of the amount of pectin initially present for CP, BS and PP, respectively. Prolonged extraction times resulted in pectin structures comparable to conventional extraction (with a higher protein content). Compared to conventional extraction, shorter UAE processes (1, 5 and 2.5 min for CP, BS and PP, respectively) resulted in comparable pectin extraction yields and slightly more branched pectin structures with a higher protein content. Both observations show the potential of UAE for the intensification of the industrial pectin extraction. The three biomasses differed mainly in the amount of non-pectic compounds co-extracted, and the sensitivity by which the UAE process was accelerated.

Adsorption of β-Lactoglobulin on Thiol-Functionalized Mesoporous Silica.

SBA-15 mesoporous materials were synthesized with different pore sizes (5 and 10 nm) and thiol-functionalized groups and then characterized to describe their ability to differentially adsorb β-lactoglobulin (BLG), a globular protein with an ellipsoid shape measuring 6.9 nm in length and 3.6 nm in width. All adsorption experiments showed that the adsorption capacities of mesoporous materials for BLG were dependent on the duration of contact between the two materials (mesoporous material and BLG) and the initial BLG concentration. It was also shown that the pore sizes and thiol groups of SBA-15-based adsorbents are important factors for the BLG adsorption capacities. Among the tested adsorbents, thiol-functionalized SBA-15 with a 10 nm pore size (SBA-15-SH-10) showed the highest adsorption capacity (0.560 g·g-1) under optimal experimental conditions. Kinetics studies demonstrated that the adsorption occurs predominantly inside the pores, with interactions occurring on heterogeneous surfaces. In addition, the thermodynamic parameters indicate a spontaneous and exothermic behavior of the BLG adsorption process onto the thiol-functionalized SBA-15 mesoporous adsorbent. Finally, the characterization of the SBA-15-SH-10 adsorbent at 308 K showed the occurrence of an oxidation reaction of the thiol groups to sulfonate groups during the adsorption process as confirmed by Raman spectroscopy. The spectra recorded after adsorption of the protein showed that this adsorption did not affect the secondary structure of the protein.

Novel 1,2,4-triazole derivatives containing the naphthalene moiety as selective butyrylcholinesterase inhibitors: Design, synthesis, and biological evaluation.

Butyrylcholinesterase (BChE) is considered a promising therapeutic target for treating Alzheimer's disease due to the increase in the levels and activity of BChE in the late stage of the disease. In this study, a series of novel 1,2,4-triazole derivatives bearing the naphthalene moiety linked to the benzothiazole, thiazole, and phenyl scaffolds via amid chain were designed and synthesized as potential and selective BChE inhibitors. The results of the inhibitory activity studies revealed that most of these compounds exhibited significant inhibitor potency on BChE. Compounds 35a (0.025 ± 0.01 μM) and 37a (0.035 ± 0.01 μM) displayed the most potent inhibitory activity, with excellent selectivity against BChE over acetylcholinesterase (SIBChE, 23,686 and 16,936, respectively) among the target compounds. The kinetics studies revealed that these compounds behaved with noncompetitive BChE inhibitors. Molecular docking studies indicated that 35a and 37a fit well into the active side of BChE. In addition, 35a and 37a also had the lowest cytotoxicity for human neuroblastoma cells (SH-SY5Y), potential antioxidant capacity, moderate inhibition potency on amyloid-β1-42 aggregation, and significant neuroprotective effect against SH-SY5Y cellinjury induced by H2O2 and amyloid-β1-42. All results suggest that these compounds might be considered as promising new lead compounds in the drug discovery process for the treatment of late-stage Alzheimer's disease.

Deep Eutectic Solvents-Based Ultrasonic-Assisted Dispersive Liquid-Liquid Microextraction for the Determination of Organophosphorus Pesticides in Honeysuckle Dew Samples.

A deep eutectic solvent (DES) with the ability to change from hydrophilic to hydrophobic was designed and synthesized and applied to the determination of organophosphorus (OPP) pesticides in honeysuckle dew samples. Choline chloride, phenol, and tetrahydrofuran (THF) were used as the hydrogen bond acceptor, hydrogen bond donor, and demulsifier, respectively. Eight OPP pesticides were extracted by DES coupled with ultrasonic-assisted extraction (UA) and then chromatographed by GC-MS. DES used as an extract solvent has the advantages of high extraction efficiency, low cost, and environmental protection. Furthermore, DES is compatible with GC-MS. The single factor experiment design and Box-Behnken design (BBD) were applied to the optimization of experimental factors, including the type and composition of extraction solvent, type of demulsifier solvent, the volume of DES and THF, pH of sample solution, and ultrasonic time. Under the optimum experimental conditions, the high degree of linearity from 0.1 to 20.0 ng mL-1 (R2 ≥ 0.9989), the limits of detection from 0.014 to 0.051 ng mL-1 (S/N = 3), and the recoveries of analytes from 81.4 to 104.4% with relative standard deviation below 8.6%. In addition, the adsorption mechanism of OPPs on DES was explored by adsorption kinetic studies. These results have demonstrated that the present method has offered an effective, accurate, and sensitive methodology for OPP pesticides in honeysuckle dew samples, and this method provides a reference for the detection of pesticide residues in traditional Chinese medicine.

Development of a Novel Cyclodextrin-Chitosan Polymer for an Efficient Removal of Pharmaceutical Contaminants in Aqueous Solution.

A novel polymer synthesized by grafting three cyclodextrins onto chitosan was characterized and evaluated for its potential to adsorb two pharmaceutical residues: ibuprofen and progesterone. The influence of various operational parameters, including contact time, initial molecule concentration, pH, ionic strength, and temperature, was investigated. The synthesized polymer exhibits an amorphous and porous structure with a remarkable swelling capacity of 9.5 mmol/g. It demonstrates remarkable adsorption capacities for progesterone and ibuprofen, reaching 90% and 75%, respectively. Kinetic studies reveal that the adsorption of both molecules follows a pseudo-second-order model. A DSC analysis elucidated the adsorption mechanism, which is governed by the formation of inclusion complexes and electrostatic interactions within the polymer network. The polymer's regeneration after 23 cycles demonstrates its sustainable adsorption efficiency. The combination of chitosan with three cyclodextrins opens up promising new avenues for water treatment and the removal of specific pollutants. This approach significantly improves the material's selectivity towards target pollutants, offering a significant advantage in pollution remediation applications.

Removal of levofloxacin from aqueous solutions by using micro algae: optimization, isotherm, and kinetic study

This study was focused on the response surface methodology modeling of the removal of levofloxacin residue using microalgae as adsorbent. The microalgae categories Cladophora was characterized by Fourier transform infrared spectroscopy (FTIR), Scanning Electron Microscopy (SEM), and X-ray Diffraction (XRD) analysis techniques. The efficacy of LEV removal was evaluated by the historical data of different variables (time, pH, algal dosage, and LEV concentration) using Central Composed Design (CCD). The predicted results of the model demonstrated that the expected responses are reasonably close to the actual data, demonstrating the efficiency of this method in producing an accurate prediction. The model was found to be significant based on its coefficient of determination, which was 0.914, along with the fitted and projected values of 0.9029 and 0.8967. Furthermore, the results of the predicted reaction optimization showed that the maximum LEV elimination could be achieved within a time of 90 min, a pH of 6 and 0.2 g/L of micro algae. The model was validated experimentally with 95.45 % of LEV elimination efficiency. In addition, it is observed that the LEV removal process followed Langmuir model and pseudo-second order kinetic in majority of the cases with R2 of 0.9959. As a result of the dead algae's simple use and high adsorption effectiveness, the results demonstrated the possible use of antibiotics in aqueous solutions.

Self-assembled mesoporous silica decorated with biogenic carbon dot nanospheres hybrid nanomaterial for efficient removal of aqueous Methoxy-DDT via a Short-Bed Adsorption column technique

Methoxy-DDT is an organochlorine pesticide extensively used in agricultural practices as a DDT substitute. Methoxy-DDT has been found and quantified in several investigations in groundwater, drinking water, sediment, and various biota. Therefore, designing efficient and cost-effective adsorbents for removing methoxy-DDT is vital. In this work, we embedded Ficus benghalensis L. derived carbon dots (CDs) in mesoporous silica (MS) to fabricate MS-CDs nanohybrid material. MS-CDs nanohybrid exhibited remarkable selectivity and removal efficiency towards methoxy-DDT, outperforming other endocrine disruptors. Parameters for industrial-scale fixed-bed adsorption columns, such as bed capacity, length, and breakthrough times, were analyzed. The kinetic study revealed that pseudo-second-order (PSO) adsorption and isotherm analysis confirmed the Langmuir model as the best fit. Small bed adsorption (SBA) column analysis was carried out using spiked Yamuna river water, and the breakthrough curves were demonstrated by varying MS-CDs bed height. The maximum adsorption capacity obtained for methoxy-DDT was 17.16 mg/g at breakthrough and 49.98 mg/g at exhaustion. The adsorbent showed 86.53% removal efficiency in the 5th cycle, demonstrating good reusability. These results indicate that the developed material MS-CDs-based organic sphere is an effective adsorbent for aqueous methoxy-DDT adsorption and can be applied to wastewater treatment.

Gas-Phase Kinetics of a Series of cis-3-Hexenyl Esters with OH Radicals under Simulated Atmospheric Conditions.

The present relative kinetic study reports on the experimentally determined gas-phase reaction rate coefficients of OH radicals with a series of seven cis-3-hexenyl esters. The experiments were carried out in the environmental simulation chamber made of quartz from the "Alexandru Ioan Cuza" University of Iasi (ESC-Q-UAIC), Romania, at a temperature of (298 ± 2) K and a total air pressure of (1000 ± 10) mbar. In situ long-path Fourier transform infrared (FTIR) spectroscopy was used to monitor cis-3-hexenyl formate (Z3HF, (Z)-CH3CH2CH═CH(CH2)2OC(O)H), cis-3-hexenyl acetate (Z3HAc, (Z)-CH3CH2CH═CH(CH2)2OC(O)CH3), cis-3-hexenyl isobutyrate (Z3HiB, (Z)-CH3CH2CH═CH(CH2)2OC(O)CH(CH3)2), cis-3-hexenyl 3-methylbutanoate (Z3H3MeB, (Z)-CH3CH2CH═CH(CH2)2OC(O)CH2CH(CH3)2), cis-3-hexenyl hexanoate (Z3HH, (Z)-CH3CH2CH═CH(CH2)2OC(O)(CH2)4CH3), cis-3-hexenyl cis-3-hexenoate (Z3HZ3H, (Z,Z)-CH3CH2CH═CH(CH2)2OC(O)CH2CH═CHCH2CH3), cis-3-hexenyl benzoate (Z3HBz, (Z)-CH3CH2CH═CH(CH2)2OC(O)C6H5), and the reference compounds. The following reaction rate coefficients (in 10-11 cm3 molecule-1 s-1) were obtained for the OH radical-initiated gas-phase oxidation of cis-3-hexenyl esters: (4.13 ± 0.45) for Z3HF, (4.19 ± 0.38) for Z3HAc, (4.84 ± 0.39) for Z3HiB, (5.39 ± 0.61) for Z3H3MeB, (7.00 ± 0.56) for Z3HH, (10.58 ± 1.40) for Z3HZ3H, and (3.41 ± 0.28) for Z3HBz. The results are discussed in terms of hexenyl ester reactivity and compared with the available literature data and structure-activity relationship (SAR) estimates. The atmospheric implications based on the average lifetimes of the investigated cis-3-hexenyl esters are discussed in the present study. The gas-phase rate coefficients for OH radical reactions are given herein for the first time for cis-3-hexenyl isobutyrate, cis-3-hexenyl 3-methylbutanoate, cis-3-hexenyl hexanoate cis-3-hexenyl cis-3-hexenoate, and cis-3-hexenyl benzoate. The newly determined gas-phase reaction rate coefficients provide new information for existing kinetic databases and contribute to the further development of SAR methodologies useful for predicting the reactivity of oxygenated volatile organic compounds.

On-Surface Self-Assembly Kinetic Study of Cu-Hexaazatriphenylene 2D Conjugated Metal-Organic Frameworks on Coinage Metals and MoS2 Substrates.

Supramolecular coordination self-assembly on solid surfaces provides an effective route to form two-dimensional (2D) metal-organic frameworks (MOFs). In such processes, surface-adsorbate interaction plays a key role in determining the MOFs' structural and chemical properties. Here, we conduct a systematic study of Cu-HAT (HAT = 1,4,5,8,9,12-hexaazatriphenylene) 2D conjugated MOFs (c-MOFs) self-assembled on Cu(111), Au(111), Ag(111), and MoS2 substrates. Using scanning tunneling microscopy and density functional theory calculations, we found that the as-formed Cu3HAT2 c-MOFs on the four substrates exhibit distinctive structural features including lattice constant and molecular conformation. The structural variations can be attributed to the differentiated substrate effects on the 2D c-MOFs, including adsorption energy, lattice commensurability, and surface reactivity. Specifically, the framework grown on MoS2 is nearly identical to its free-standing counterpart. This suggests that the 2D van der Waals (vdW) materials are good candidate substrates for building intrinsic 2D MOFs, which hold promise for next-generation electronic devices.

Propane dehydrogenation catalysis of group IIIB and IVB metal hydrides.

Catalytic propane dehydrogenation (PDH) has mainly been studied using metal- and metal oxide-based catalysts. Studies on dehydrogenation catalysis by metal hydrides, however, have rarely been reported. In this study, PDH reactions using group IIIB and IVB metal hydride catalysts were investigated under relatively low-temperature conditions of 450 °C. Lanthanum hydride exhibited the lowest activation energy for dehydrogenation and the highest propylene yield. Based on kinetics studies, a comparison between the reported calculation results and isotope experiments, the hydrogen vacancies of metal hydrides were involved in low-temperature PDH reactions.

Maleated Hydroxyethyl Cellulose for the Efficient Removal of Cd(II) Ions from an Aqueous Solution: Isothermal, Kinetic and Regeneration Studies

Maleated Hydroxyethyl Cellulose for the Efficient Removal of Cd(II) Ions from an Aqueous Solution: Isothermal, Kinetic and Regeneration Studies

Development and Evaluation of Docetaxel-Loaded Nanostructured Lipid Carriers for Skin Cancer Therapy.

This study focuses on the design, characterization, and optimization of nanostructured lipid carriers (NLCs) loaded with docetaxel for the treatment of skin cancer. Employing a systematic formulation development process guided by Design of Experiments (DoE) principles, key parameters such as particle size, polydispersity index (PDI), zeta potential, and entrapment efficiency were optimized to ensure the stability and drug-loading efficacy of the NLCs. Combined XRD and cryo-TEM analysis were employed for NLC nanostructure evaluation, confirming the formation of well-defined nanostructures. In vitro kinetics studies demonstrated controlled and sustained docetaxel release over 48 h, emphasizing the potential for prolonged therapeutic effects. Cytotoxicity assays on human umbilical vein endothelial cells (HUVEC) and SK-MEL-24 melanoma cell line revealed enhanced efficacy against cancer cells, with significant selective cytotoxicity and minimal impact on normal cells. This multidimensional approach, encompassing formulation optimization and comprehensive characterization, positions the docetaxel-loaded NLCs as promising candidates for advanced skin cancer therapy. The findings underscore the potential translational impact of these nanocarriers, paving the way for future preclinical investigations and clinical applications in skin cancer treatment.

Multicomponent Equilibrium Isotherms and Kinetics Study of Heavy Metals Removal from Aqueous Solutions Using Electrocoagulation Combined with Mordenite Zeolite and Ultrasonication

Multicomponent Equilibrium Isotherms and Kinetics Study of Heavy Metals Removal from Aqueous Solutions Using Electrocoagulation Combined with Mordenite Zeolite and Ultrasonication

Constrained Catalytic Itinerary of a Retaining 3,6-Anhydro-D-Galactosidase, a Key Enzyme in Red Algal Cell Wall Degradation.

The marine Bacteroidota Zobellia galactanivorans has a polysaccharide utilization locus dedicated to the catabolism of the red algal cell wall galactan carrageenan and its unique and industrially important α-3,6-anhydro-D-galactose (ADG) monosaccharide. Here we present the first analysis of the specific molecular interactions the exo-(α-1,3)-3,6-anhydro-D-galactosidase ZgGH129 uses to cope with the strict steric restrictions imposed by its bicyclic ADG substrate - which is ring flipped relative to D-galactose. Crystallographic snapshots of key catalytic states obtained with the natural substrate and novel chemical tools designed to mimic species along the reaction coordinate, together with quantum mechanics/molecular mechanics (QM/MM) metadynamics methods and kinetic studies, demonstrate a retaining mechanism where the second step is rate limiting. The conformational landscape of the constrained 3,6-anhydro-D-galactopyranose ring proceeds through enzyme glycosylation B1,4 → [E4]‡ → E4/1C4 and deglycosylation E4/1C4 → [E4]‡ → B1,4 itineraries limited to the Southern Hemisphere of the Cremer-Pople sphere. These results demonstrate the conformational changes throughout catalysis in a non-standard, sterically restrained, bicyclic monosaccharide and provide a molecular framework for mechanism-based inhibitor design for anhydro-type carbohydrate-processing enzymes and for future applications involving carrageenan degradation. In addition, it provides a rare example of distinct niche-based conformational itineraries within the same carbohydrate-active enzyme family.

Polymer and micellar catalysis in d-fructose oxidation by imidazolium fluorochromate: A kinetic and mechanistic study

This work investigated the oxidation of d-fructose using imidazolium fluorochromate (IFC) as an oxidant and analyzed how sodium dodecyl sulfate (SDS) and polyethylene glycol (PEG-400) affected the reaction kinetics. The process exhibited a unit-order dependence on IFC, d-fructose, and perchloric acid concentration. Perchloric acid was the primary source of hydrogen ions in the reaction mixture. The stoichiometry of the reaction indicated that 3 mol of d-fructose requires 4 mol of IFC. Acrylonitrile, a radical-generating species, did not impact the reaction rate, indicating the absence of a free radical intermediate. The reaction rate decreases as the Mn (II) ions concentration increases, suggesting the involvement of Cr (IV) species in the reaction. The dielectric value of the reaction medium (D) had an inverse effect on the rate, and the outcomes were consistent with the Amis (log k1 and 1/D) and Kirkwood plots (log k1 and (D-1/2D+1)), indicating the presence of dipole-dipole interactions in the process. SDS and PEG-400 catalyzed the reaction. The reaction showed significant catalysis before reaching the critical micelle concentration (CMC). However, the observed rate constants stabilized at higher SDS concentrations exceeding the CMC. Piszkiewicz's cooperativity model was employed to describe the surfactant catalysis, while the Benesi-Hildebrand equation was utilized to explain polymer catalysis. The activation parameters are ΔH† = 44.3 ± 1.3 kJ mol−1, and ΔS† = −133.4 ± 4.3 J K−1 mol−1. The products of the reaction have been identified by spectral analysis as d-arabinoniclactone and formic acid. The formation of an ester complex followed by its decomposition was proposed as the rate-limiting step in the proposed mechanistic reaction pathway.

Seasonal variation effect on water quality and sediments criteria and its influence on soil pollution: Fayoum Governorate, Egypt

BackgroundIrrigation with low-quality water without considering the acceptable levels negatively impacts not only humans, but also extends to the whole surrounding ecosystem. The current research is a comprehensive-integrated appraisal of the irrigation water quality gathered from El-Batts drain in Fayoum Governorate, from September 2021 to June 2022, together with the drain sediments and the soils adjacent to it. The characteristics (physical, chemical and biological), and the risk fate of some heavy metals (As, B, Cr, Cu, Zn, Cd, Pb, Ni, Fe and Mn) were measured. Moreover, the risks of the studied pollutants were assessed using many indices: irrigation water quality index (IWQI), contamination factor (Cf), degree of contamination (Cd), Salinity indices and Zn equivalent (ZE). Additionally, kinetic studies of the inorganic pollutants were evaluated to determine their availability and impact on the surrounding environment.ResultsData from IQWI showed that water in all five sites was assumed to be very bad and unsuitable for usage with a general average (14.62 and 25.35) in all four seasons. ZE exceeds the critical level of 250, which means there is a risk of soil contamination.ConclusionsThe elevated levels of heavy metals, microbial enzymes, pathogenic fecal coliform and Salmonella reflect bad and direct risk of dealing with such water in irrigation and its effect on the soil ecosystem and the growing crops. Most of the tested parameters exceeded the acceptable levels of the Egyptian Governmental Law Guidelines, WHO and FAO, which may threaten aquatic life. Best managements practices and remediation techniques should be applied to minimize the hazards in such waters.