Studies Of Integral Membrane Proteins Research Articles

Optimisation of Over-Expression in E. coli and Biophysical Characterisation of Human Membrane Protein Synaptogyrin 1

Progress in functional and structural studies of integral membrane proteins (IMPs) is lacking behind their soluble counterparts due to the great challenge in producing stable and homogeneous IMPs. Low natural abundance, toxicity when over-expressed and potential lipid requirements of IMPs are only a few reasons for the limited progress. Here, we describe an optimised workflow for the recombinant over-expression of the human tetraspan vesicle protein (TVP) synaptogyrin in Escherichia coli and its biophysical characterisation. TVPs are ubiquitous and abundant components of vesicles. They are believed to be involved in various aspects of the synaptic vesicle cycle, including vesicle biogenesis, exocytosis and endocytotic recycling. Even though TVPs are found in most cell types, high-resolution structural information for this class of membrane proteins is still missing. The optimisation of the N-terminal sequence of the gene together with the usage of the recently developed Lemo21(DE3) strain which allows the balancing of the translation with the membrane insertion rate led to a 50-fold increased expression rate compared to the classical BL21(DE3) strain. The protein was soluble and stable in a variety of mild detergents and multiple biophysical methods confirmed the folded state of the protein. Crosslinking experiments suggest an oligomeric architecture of at least four subunits. The protein stability is significantly improved in the presence of cholesteryl hemisuccinate as judged by differential light scattering. The approach described here can easily be adapted to other eukaryotic IMPs.

Translational Diffusion Measurements by Microcoil NMR in Aqueous Solutions of the Fos-10 Detergent-Solubilized Membrane Protein OmpX

Aqueous solutions of the detergent Fos-10 (n-decylphosphocholine) without and with addition of the integral membrane protein (IMP) OmpX (outer membrane protein X) have been characterized using pulsed field gradient-stimulated echo (PFG-STE) NMR experiments for measurements of translational diffusion coefficients. Effective diffusion coefficients for Fos-10 micelles in the absence of OmpX were obtained by observation of NMR signals from 10-bromodecan-1-ol that had been inserted into the micelles, and in the presence of OmpX by NMR observation of the protein. It is thus shown that solutions of Fos-10-reconstituted OmpX can be quantitatively described as a mixture of Fos-10 monomers, uniform Fos-10 micelles, and uniform OmpX-containing Fos-10 micelles, with Fos-10 monomers in fast exchange between the pools of these three species. This result establishes an avenue for efficient determination of the effective translational diffusion coefficients of IMP-containing detergent micelles based on observation of the intense detergent NMR signals, which is also applicable with unlabeled IMPs. This monitoring of the species present in a given IMP solution contributes to improved guidelines for rational selection of detergent and buffer conditions in structural studies of integral membrane proteins.

Expression screening of membrane proteins with cell-free protein synthesis

Detailed biophysical studies of integral membrane proteins are often hampered by sample preparation difficulties. Membrane proteins are typically difficult to express in sufficient amounts to enable the use of demanding techniques such as nuclear magnetic resonance and X-ray crystallography for structural biology. Here, we show that an inexpensive batch-based cell-free expression system can be a viable alternative for production of a wide range of different membrane proteins, both of prokaryotic and eukaryotic origin. Out of 38 tested protein constructs, 37 express at levels suitable for structural biology, i.e. enough to produce several milligrams of protein routinely and without excessive costs. This success rate was not anticipated and is even more impressive considering that more than half of the expressed proteins where of mammalian origin. A detergent screen identified Brij-58 as the, in general, most successful choice for co-translational solubilization of the expressed proteins.

The Monoolein-Cholesterol Cubic Phase: Characterization by NMR Spectroscopy

The lipid cubic phase (LCP) formed by particular mixtures of monoolein and water has received significant attention as a system for the crystallization of membrane proteins for structural characterization by x-ray crystallography (the so-called in meso method [Caffrey & Cherezov: Nature Protocols (2009) 4(5):706]). In several cases, the addition of specific lipids to the mesophase was necessary to promote the stabilization and crystallization of a protein. For example, the addition of cholesterol was instrumental for obtaining high-resolution structures of the beta2 adrenergic receptor [Cherezov et al: Science (2007) 318:1258], and of four other G protein-coupled receptors. Apart from the success of LCPs for supporting crystal growth, the bulk isotropic symmetry, rapid diffusion and localized bilayer-like environment make this system potentially useful for NMR studies. We demonstrate that several NMR techniques traditionally associated with solution phase samples (e.g., heteronuclear single quantum coherence, HSQC, and saturation transfer difference, STD) can be adapted for use in LCPs comprising monoolein with cholesterol and/or a transmembrane protein. Our data indicate that a range of advanced NMR techniques could be applied in LCPs, enabling studies of dynamics that will complement the x-ray structural data already obtainable using this phase and significantly expand the variety of tools available for the study of integral membrane proteins.

Self-Assembled Nanometer Scale Lipid Bilayers for Elucidating the Structure and Function of Membrane Proteins

One of the most challenging problems in biochemical science are studies of integral membrane proteins. Using designed amphipathic helical peptides, termed membrane scaffold proteins (MSPs) we have developed a simple and robust system that self-assembles phospholipids into soluble discoidal phospholipid bilayers 8-10 nm in diameter, termed Nanodiscs. Importantly, the same self-assembly process can be used to directly incorporate a variety of integral membrane proteins into these nanobilayers. The result is a native-like environment that provides stability and full functionality for these integral membrane protein targets. Using MSPs of varying lengths, the size and composition of the Nanodiscs can also control the oligomerization state of incorporated targets. During my presentation I will relay our most recent results in the incorporation of integral membrane enzymes, channels, transporters and receptors into Nanodiscs as well as the structural, biophysical and biochemical characterization of these nanostructures. We have also demonstrated that this same self-assembly process can be used to form Soluble Membrane Protein Libraries (SMPL) which can be used as the basis for high-throughput screening of protein-protein, cell-cell and cell-viral interactions. Supported by grants from the National Institutes of Health.

Physiological Response to Membrane Protein Overexpression in E. coli

Overexpression represents a principal bottleneck in structural and functional studies of integral membrane proteins (IMPs). Although E. coli remains the leading organism for convenient and economical protein overexpression, many IMPs exhibit toxicity on induction in this host and give low yields of properly folded protein. Different mechanisms related to membrane biogenesis and IMP folding have been proposed to contribute to these problems, but there is limited understanding of the physical and physiological constraints on IMP overexpression and folding in vivo. Therefore, we used a variety of genetic, genomic, and microscopy techniques to characterize the physiological responses of Escherichia coli MG1655 cells to overexpression of a set of soluble proteins and IMPs, including constructs exhibiting different levels of toxicity and producing different levels of properly folded versus misfolded product on induction. Genetic marker studies coupled with transcriptomic results indicate only minor perturbations in many of the physiological systems implicated in previous studies of IMP biogenesis. Overexpression of either IMPs or soluble proteins tends to block execution of the standard stationary-phase transcriptional program, although these effects are consistently stronger for the IMPs included in our study. However, these perturbations are not an impediment to successful protein overexpression. We present evidence that, at least for the target proteins included in our study, there is no inherent obstacle to IMP overexpression in E. coli at moderate levels suitable for structural studies and that the biochemical and conformational properties of the proteins themselves are the major obstacles to success. Toxicity associated with target protein activity produces selective pressure leading to preferential growth of cells harboring expression-reducing and inactivating mutations, which can produce chemical heterogeneity in the target protein population, potentially contributing to the difficulties encountered in IMP crystallization.

Solution NMR study of integral membrane proteins

Signals between a cell and its environment are often transmitted through membrane proteins; therefore, many membrane proteins, including G protein-coupled receptors (GPCRs) and ion channels, are important drug targets. Structural information about membrane proteins remains limited owing to challenges in protein expression, purification and the selection of membrane-mimicking systems that will retain protein structure and function. This review describes recent advances in solution NMR applied to the structural study of integral membrane proteins. The examples herein demonstrate that solution NMR spectroscopy will play a unique role not only in structural analysis, but also drug discovery of membrane proteins.

Advances in shotgun proteomics and the analysis of membrane proteomes

The emergence of shotgun proteomics has facilitated the numerous biological discoveries made by proteomic studies. However, comprehensive proteomic analysis remains challenging and shotgun proteomics is a continually changing field. This review details the recent developments in shotgun proteomics and describes emerging technologies that will influence shotgun proteomics going forward. In addition, proteomic studies of integral membrane proteins remain challenging due to the hydrophobic nature in integral membrane proteins and their general low abundance levels. However, there have been many strategies developed for enriching, isolating and separating membrane proteins for proteomic analysis that have moved this field forward. In summary, while shotgun proteomics is a widely used and mature technology, the continued pace of improvements in mass spectrometry and proteomic technology and methods indicate that future studies will have an even greater impact on biological discovery.

Lipid−Protein Nanodiscs as Reference Medium in Detergent Screening for High-Resolution NMR Studies of Integral Membrane Proteins

The choice of a suitable detergent-based membrane mimetic is of crucial importance for high-resolution NMR studies of membrane proteins. The present report describes a new approach of detergent screening. It is based on the comparison of 2D (1)H,(15)N-correlation spectra of a protein in a membrane-bilayer "reference" medium and in "trial" detergent-based environments. The proposed "reference" medium is the lipid-protein nanodisc (LPN) representing nanoscale phospholipid bilayers wrapped around by apolipoprotein A-1. The set of zwitterionic (DPC, DMPC/DHPC), anionic (SDS, LMPG, LPPG), and weakly cationic (LDAO) detergent-based media was screened for their ability to represent the native structure of the isolated voltage-sensing domain (VSD) of the archaeal potassium channel KvAP. The VSD/LPN complexes composed of saturated zwitterionic (DMPC), anionic (DMPG), or a mixture of unsaturated differently charged (POPC/DOPG, 3:1) lipids were used as reference. All assayed detergent media demonstrate similar CD spectra of the domain with a high level (approximately 60%) of overall helicity but different 2D NMR spectra. Using the reference spectrum of the VSD in LPN, we were able to choose the detergent composition in which the membrane-like structure of the VSD is preserved.

Design, synthesis, and properties of branch-chained maltoside detergents for stabilization and crystallization of integral membrane proteins: human connexin 26.

A challenging requirement for structural studies of integral membrane proteins (IMPs) is the use of amphiphiles that replicate the hydrophobic environment of membranes. Progress has been impeded by the limited number of useful detergents and the need for a deeper understanding of their structure-activity relationships. To this end, we designed a family of detergents containing short, branched alkyl chains at the interface between the polar head and the apolar tail. This design mimics the second aliphatic chain of lipid molecules and reduces water penetration, thereby increasing the hydrophobicity within the interior of the micelle. To compare with the popular straight-chained maltoside detergents, the branch-chained beta-D-maltosides were synthesized efficiently in pure anomeric form. The branch-chained maltosides form smaller micelles by having shorter main chains, while having comparable hydrophobicity to the detergents with only straight chains. Selected branch-chained and straight-chained maltoside detergents were examined for their ability to solubilize, stabilize, and aid the crystallization of human connexin 26, an alpha-helical IMP that forms hexamers. We showed that the branch-chained maltosides with optimized micellar properties performed as well as or better than the straight-chained analogues and enabled crystallization in different space groups.

Structural study of the membrane protein MscL using cell-free expression and solid-state NMR

High-resolution structures of membrane proteins have so far been obtained mostly by X-ray crystallography, on samples where the protein is surrounded by detergent. Recent developments of solid-state NMR have opened the way to a new approach for the study of integral membrane proteins inside a membrane. At the same time, the extension of cell-free expression to the production of membrane proteins allows for the production of proteins tailor made for NMR. We present here an in situ solid-state NMR study of a membrane protein selectively labeled through the use of cell-free expression. The sample consists of MscL (mechano-sensitive channel of large conductance), a 75 kDa pentameric α-helical ion channel from Escherichia coli, reconstituted in a hydrated lipid bilayer. Compared to a uniformly labeled protein sample, the spectral crowding is greatly reduced in the cell-free expressed protein sample. This approach may be a decisive step required for spectral assignment and structure determination of membrane proteins by solid-state NMR.

Characterization of protein detergent complexes by NMR, light scattering, and analytical ultracentrifugation

Bottlenecks in expression, solubilization, purification and crystallization hamper the structural study of integral membrane proteins (IMPs). Successful crystallization is critically dependent on the purity, stability and oligomeric homogeneity of an IMP sample. These characteristics are in turn strongly influenced by the type and concentration of the detergents used in IMP preparation. By utilizing the techniques and analytical tools we earlier developed for the characterization of protein-detergent complexes (PDCs) [21], we demonstrate that for successful protein extraction from E. coli membrane fractions, the solubilizing detergent associates preferentially to IMPs rather than to membrane lipids. Notably, this result is contrary to the generally accepted mechanism of detergent-mediated IMP solubilization. We find that for one particular member of the family of proteins studied (E. coli receptor kinases, which is purified in mixed multimeric states and oligomerizes through its transmembrane region), the protein oligomeric composition is largely unaffected by a 10-fold increase in protein concentration, by alteration of micelle properties through addition of other detergents to the PDC sample, or by a 20-fold variation in the detergent concentration used for solubilization of the IMP from the membrane. We observed that the conditions used for expression of the IMP, which impact protein density in the membrane, has the greatest influence on the IMP oligomeric structure. Finally, we argue that for concentrating PDCs smaller than 30 kDa, stirred concentration cells are less prone to over-concentration of detergent and are therefore more effective than centrifugal ultrafiltration devices.

Gel chromatography and analytical ultracentrifugation to determine the extent of detergent binding and aggregation, and Stokes radius of membrane proteins using sarcoplasmic reticulum Ca2+–ATPase as an example

For structural studies of integral membrane proteins, including their 3D crystallization, the judicious use of detergent for solubilization and purification is required. Detergent binding by the solubilized protein is an important parameter to determine the hydrodynamic properties in terms of size and aggregational (monomeric/oligo(proto)meric) state of the protein. Detergent binding can be measured by gel filtration chromatography under equilibrium conditions and after separation from mixed micelles of solubilized lipid and detergent. Using sarcoplasmic reticulum Ca(2+)-ATPase as an example, we demonstrate in this protocol complete procedures for measurement of detergent binding using (i) radiolabeled n-dodecyl-beta-D-maltoside (DM) or (ii) from measurements of the increase in refractive index due to the presence of bound detergent on the protein. The latter measurement can also be performed by sedimentation velocity (SV) analysis in the analytical ultracentrifuge which in addition allows determination of the sedimentation coefficient. In combination with estimation of Stokes radius by gel filtration calibration, the molecular mass and asymmetry of the solubilized protein can be calculated. In the proposed protocols, the gel chromatographic procedures require 1 d; SV experiments are performed just after size exclusion. The whole time for these experiments is 24 h. Data analysis of analytical ultracentrifugation requires a couple of days.

Crystal structure of a self-assembling lipopeptide detergent at 1.20 Å

Lipopeptide detergents (LPDs) are a new class of amphiphile designed specifically for the structural study of integral membrane proteins. The LPD monomer consists of a 25-residue peptide with fatty acyl chains linked to side chains located at positions 2 and 24 of the peptide. LPDs are designed to form alpha-helices that self-assemble into cylindrical micelles, providing a more natural interior acyl chain packing environment relative to traditional detergents. We have determined the crystal structure of LPD-12, an LPD coupled to two dodecanoic acids, to a resolution of 1.20 A. The LPD-12 monomers adopt the target conformation and associate into cylindrical octamers as expected. Pairs of helices are strongly associated as Alacoil-type antiparallel dimers, and four of these dimers interact through much looser contacts into assemblies with approximate D(2) symmetry. The aligned helices form a cylindrical shell with a hydrophilic exterior that protects an interior hydrophobic cavity containing the 16 LPD acyl chains. Over 90% of the methylene/methyl groups from the acylated side chains are visible in the micelle interiors, and approximately 90% of these adopt trans dihedral angle conformations. Dodecylmaltoside (DDM) was required for the crystallization of LPD-12, and we find 10-24 ordered DDM molecules associated with each LPD assembly, resulting in an overall micelle molecular weight of approximately 30 kDa. The structures confirm the major design objectives of the LPD framework, and reveal unexpected features that will be helpful in the engineering additional versions of lipopeptide amphiphiles.

NMR spectroscopic and analytical ultracentrifuge analysis of membrane protein detergent complexes

BackgroundStructural studies of integral membrane proteins (IMPs) are hampered by inherent difficulties in their heterologous expression and in the purification of solubilized protein-detergent complexes (PDCs). The choice and concentrations of detergents used in an IMP preparation play a critical role in protein homogeneity and are thus important for successful crystallization.ResultsSeeking an effective and standardized means applicable to genomic approaches for the characterization of PDCs, we chose 1D-NMR spectroscopic analysis to monitor the detergent content throughout their purification: protein extraction, detergent exchange, and sample concentration. We demonstrate that a single NMR measurement combined with a SDS-PAGE of a detergent extracted sample provides a useful gauge of the detergent's extraction potential for a given protein. Furthermore, careful monitoring of the detergent content during the process of IMP production allows for a high level of reproducibility. We also show that in many cases a simple sedimentation velocity measurement provides sufficient data to estimate both the oligomeric state and the detergent-to-protein ratio in PDCs, as well as to evaluate the homogeneity of the samples prior to crystallization screening.ConclusionThe techniques presented here facilitate the screening and selection of the extraction detergent, as well as help to maintain reproducibility in the detergent exchange and PDC concentration procedures. Such reproducibility is particularly important for the optimization of initial crystallization conditions, for which multiple purifications are routinely required.

Shotgun Analysis of Integral Membrane Proteins Facilitated by Elevated Temperature

The beneficial effects on peak selectivity and resolution of conducting liquid chromatography (LC) at elevated temperature (e.g., 30-80 degrees C) are generally well-known; however, its importance for peptide recovery is not nearly as well recognized. This report demonstrates that microLC analysis of membrane proteomic samples significantly benefits from the application of heat. Enriched membrane and membrane-embedded peptides (the latter obtained by membrane shaving) were analyzed by microLC-tandem mass spectrometry (MS/MS) from 20 to 60 degrees C using a standard reversed-phase material. Maximal protein and hydrophobic peptide recovery was obtained at 60 degrees C. The membrane-shaving method employed, a recently optimized version of the high pH/proteinase K protocol, provided significant integral membrane protein enrichment: 98% of identified proteins were predicted to have at least one transmembrane domain (87% to have at least three), and 68% of peptides were predicted to contain transmembrane segments. Analysis of this highly enriched sample at elevated temperature increased protein identifications by 400%, and peptide identifications by 500%, as compared to room-temperature separation. Given that most microLC-MS/MS analyses are currently conducted at room temperature, the findings described herein should be of considerable value for improving the comprehensive study of integral membrane proteins.

Amphipathic Polymers: Tools To Fold Integral Membrane Proteins to Their Active Form

Among the major obstacles to pharmacological and structural studies of integral membrane proteins (MPs) are their natural scarcity and the difficulty in overproducing them in their native form. MPs can be overexpressed in the non-native state as inclusion bodies, but inducing them to achieve their functional three-dimensional structure has proven to be a major challenge. We describe here the use of an amphipathic polymer, amphipol A8-35, as a novel environment that allows both beta-barrel and alpha-helical MPs to fold to their native state, in the absence of detergents or lipids. Amphipols, which are extremely mild surfactants, appear to favor the formation of native intramolecular protein-protein interactions over intermolecular or protein-surfactant ones. The feasibility of the approach is demonstrated using as models OmpA and FomA, two outer membrane proteins from the eubacteria Escherichia coli and Fusobacterium nucleatum, respectively, and bacteriorhodopsin, a light-driven proton pump from the plasma membrane of the archaebacterium Halobacterium salinarium.

Expression, purification, and characterization of Thermotoga maritima membrane proteins for structure determination

Structural studies of integral membrane proteins typically rely upon detergent micelles as faithful mimics of the native lipid bilayer. Therefore, membrane protein structure determination would be greatly facilitated by biophysical techniques that are capable of evaluating and assessing the fold and oligomeric state of these proteins solubilized in detergent micelles. In this study, an approach to the characterization of detergent-solubilized integral membrane proteins is presented. Eight Thermotoga maritima membrane proteins were screened for solubility in 11 detergents, and the resulting soluble protein-detergent complexes were characterized with small angle X-ray scattering (SAXS), nuclear magnetic resonance (NMR) spectroscopy, circular dichroism (CD) spectroscopy, and chemical cross-linking to evaluate the homogeneity, oligomeric state, radius of gyration, and overall fold. A new application of SAXS is presented, which does not require density matching, and NMR methods, typically used to evaluate soluble proteins, are successfully applied to detergent-solubilized membrane proteins. Although detergents with longer alkyl chains solubilized the most proteins, further characterization indicates that some of these protein-detergent complexes are not well suited for NMR structure determination due to conformational exchange and protein oligomerization. These results emphasize the need to screen several different detergents and to characterize the protein-detergent complex in order to pursue structural studies. Finally, the physical characterization of the protein-detergent complexes indicates optimal solution conditions for further structural studies for three of the eight overexpressed membrane proteins.

MISTIC BOOSTS PROTEIN YIELDS

A NOVEL BACTERIAL MEMbrane protein can be used to produce large quantities of other tough-to-obtain membrane proteins, according to scientists at Salk Institute, San Diego { Science , 307 , 1317 (2005)}. The discovery by Salk structural biologists Senyon Choe, Roland Riek, Tarmo P. Rooslid, and coworkers opens new avenues around traditional obstacles in the study of integral membrane proteins, particularly those of eukaryotic origin. Such membrane proteins are thought to account for nearly a third of eukaryotic genomes and play central roles in a wide range of cellular processes. It's become routine to determine the structure of soluble proteins, but membrane proteins are another story, the authors write. These proteins are notoriously difficult to crystallize. In addition, it's difficult to produce properly folded membrane proteins in high yields. At the root of this production problem, the researchers continue, is the fact that eukaryotic membrane proteins often can't be overproduced in bacteria, the ...

Conical tomography of freeze-fracture replicas: a method for the study of integral membrane proteins inserted in phospholipid bilayers

We have used conical tomography to study the structure of integral proteins in their phospholipid bilayer environments. Complete conical series were collected from replicas of the water channel aquaporin-0 (AQP0), a 6.6 nm side tetramer with a molecular weight of ∼120 kDa that was purified and reconstituted in liposomes. The replicas were tilted at 38°, 50° or 55° and rotated by 2.5°, 4°, or 5° increments until completing 360° turns. The elliptical paths of between 6 and 12 freeze-fracture particles aligned the images to a common coordinate system. Using the weighted back projection algorithm, small volumes of the replicas were independently reconstructed to reconstitute the field. Using the Fourier Shell Correlation computed from reconstructions of even and odd projections of the series, we estimated a resolution of 2–3 nm, a value that was close to the thickness of the replica (∼1.5 nm). The 3D reconstructions exhibited isotropic resolution along the x– y plane, which simplified the analysis of particles oriented randomly in the membrane plane. In contrast to reconstructions from single particles imaged using random conical tilt [J. Mol. Biol. 325 (2003) 210], the reconstructions using conical tomography allowed the size and shape of individual particles representing the AQP0 channel to be identified without averaging or imposing symmetry. In conclusion, the reconstruction of freeze-fracture replicas with electron tomography has provided a novel experimental approach for the study of integral proteins inserted in phospholipid bilayers.