Cell Structure Research Articles

Role of Artificial Intelligence in Drug Discovery and Target Identification in Cancer.

Drug discovery and development (DDD) is a highly complex process that necessitates precise monitoring and extensive data analysis at each stage. Furthermore, the DDD process is both timeconsuming and costly. To tackle these concerns, artificial intelligence (AI) technology can be used, which facilitates rapid and precise analysis of extensive datasets within a limited timeframe. The pathophysiology of cancer disease is complicated and requires extensive research for novel drug discovery and development. The first stage in the process of drug discovery and development involves identifying targets. Cell structure and molecular functioning are complex due to the vast number of molecules that function constantly, performing various roles. Furthermore, scientists are continually discovering novel cellular mechanisms and molecules, expanding the range of potential targets. Accurately identifying the correct target is a crucial step in the preparation of a treatment strategy. Various forms of AI, such as machine learning, neural-based learning, deep learning, and network-based learning, are currently being utilised in applications, online services, and databases. These technologies facilitate the identification and validation of targets, ultimately contributing to the success of projects. This review focuses on the different types and subcategories of AI databases utilised in the field of drug discovery and target identification for cancer.

Interpenetrating microstructure in laser powder-bed fusion parts using selective rescanning

In-situ microstructural control is desirable in additively manufactured metal parts due to limited post-processing options for net-shaped components. Here, we introduce a novel selective rescanning approach to control the local solidification conditions and the microstructure in metal parts produced by laser powder-bed fusion (LPBF). We show that the melt pool dimensions, grain size, and sub-grain cell structure can be selectively varied in three dimensions to engineer the mechanical response of LPBF parts. The lattice-based rescanning strategy enables the formation of an interpenetrating microstructure comprised of fine and coarse grains. The localized heating and cooling-induced thermal stresses increase the hardness and tensile strength of rescanned specimens. The study shows the potential of selective rescanning strategy as a promising avenue for achieving precise control of microstructure and properties in as-printed LPBF parts without subsequent processing.

Advanced Optoelectronic Modeling and Optimization of HTL-Free FASnI3/C60 Perovskite Solar Cell Architecture for Superior Performance.

In this study, a novel perovskite solar cell (PSC) architecture is presented that utilizes an HTL-free configuration with formamide tin iodide (FASnI3) as the active layer and fullerene (C60) as the electron transport layer (ETL), which represents a pioneering approach within the field. The elimination of hole transport layers (HTLs) reduces complexity and cost in PSC heterojunction structures, resulting in a simplified and more cost-effective PSC structure. In this context, an HTL-free tin HC(NH2)2SnI3-based PSC was simulated using the solar cell capacitance simulator (SCAPS) within a one-dimensional framework. Through this approach, the device performance of this novel HTL-free FASnI3-based PSC structure was engineered and evaluated. Key performance parameters, including the open-circuit voltage (Voc), short-circuit current density (Jsc), fill factor (FF), power conversion efficiency (PCE), I-V characteristics, and quantum efficiency (QE), were systematically assessed through the modulation of physical parameters across various layers of the device. A preliminary analysis indicated that the HTL-free configuration exhibited improved I-V characteristics, with a PCE increase of 1.93% over the HTL configuration due to improved electron and hole extraction characteristics, reduced current leakage at the back contact, and reduced trap-induced interfacial recombination. An additional boost to the device's key performance parameters has been achieved through the further optimization of several physical parameters, such as active layer thickness, bulk and interface defects, ETL thickness, carrier concentration, and back-contact materials. For instance, increasing the thickness of the active layer PSC up to 1500 nm revealed enhanced PV performance parameters; however, further increases in thickness have resulted in performance saturation due to an increased rate of hole-electron recombination. Moreover, a comprehensive correlation study has been conducted to determine the optimum thickness and donor doping level for the C60-ETL layer in the range of 10-200 nm and 1012-1019 cm-3, respectively. Optimum device performance was observed at an ETL-C60 ultra-thin thickness of 10 nm and a carrier concentration of 1019 cm-3. To maintain improved PCEs, bulk and interface defects must be less than 1016 cm-3 and 1015 cm-3, respectively. Additional device performance improvement was achieved with a back-contact work function of 5 eV. The optimized HTL-free FASnI3 structure demonstrated exceptional photovoltaic performance with a PCE of 19.63%, Voc of 0.87 V, Jsc of 27.86 mA/cm2, and FF of 81%. These findings highlight the potential for highly efficient photovoltaic (PV) technology solutions based on lead-free perovskite solar cell (PSC) structures that contribute to environmental remediation and cost-effectiveness.

Long-term Supplementation of Deep-fried Oil Consumption Impairs Oxidative Stress, Colon Histology and Increases Neurodegeneration.

Sesame oil and sunflower oil are popular cooking oils in southern India. Deep-frying is a frequent method of food preparation. Deep-frying at high temperatures has been linked with several disorders, including cancer, diabetes, and unknown metabolic problems. There have been no long-term investigations on the influence of deep-fried oils on PUFA metabolism and pathogenesis. As a result, the current study aimed to explore the effect of deep-fried frying oil on Wistar rats by continuous treatment. Furthermore, the pathophysiology of MSG-induced neurotoxicity in Wistar rats was investigated. Wistar rats weighing 200-260 g were used in this study. Female rats were divided into five groups fed with (1) standard chow (control group), (2) unheated sesame oil (UHSO) along with standard chow, and (3) reheated sesame oil (RHSO) along with standard chow, (4) unheated sunflower oil (UHSFO) along with standard chow, and (5) reheated sunflower oil (RHSFO) along with standard chow and continued up to F1 generation. Furthermore, F1 male rats were treated with MSG of 2 g/kg body weight for 10 alternative days and were sacrificed for major tissues. We found that rats treated with RHSO and RHSFO showed increased body weight. Deep-fried oil-fed rats (RHSO and RHSFO) showed a significant increase in total cholesterol- 100 mg/dl, LDL- 23 mg/dl, & TAG-100 mg/dl, when compared to unheated oil rats. Liver function tests revealed that AST and ALT levels were significantly elevated in RHSO and RHSFO when compared to unheated oils and the control group. Inflammatory markers revealed that Hs-CRP (0.35 mg/dl) and LDH levels (6000 U/L) were significantly elevated in RHSO and RHSFO when compared to the unheated oils and control group. RT-PCR results showed significant elevation in the antioxidant genes SOD (twofold) and GPX (3-fold) when compared to UHSO and UHSFO groups. Liver and colon histology showed significant damage in the cell structure of RHSO and RHSFO-treated rats. Further, rats treated with unheated oils and MSG showed statistically significantly higher mRNA expression of neuroplasticity genes CREB, BDNF and reduced NMDA levels (UHSO, UHSFO) when compared to reheated oil groups (RHSO & RHSFO). Proinflammatory marker TNF-α expression was significantly elevated in RHSFO-treated rats when compared to control. Brain histology showed focal damage in glial cell degeneration in rats treated with RHSO and RHSFO when compared to other groups. The results from the present study proved that continuous supplementation deep-fried reheated oil consumption increased serum TGL and oxidative stress markers. Impaired liver metabolism and the involvement of the gut-liver-brain axis increased the risk of neurodegeneration.

Interface engineering at the nanoscale: Synthesis of low‐energy boundaries

The low toughness and structural stability of nanostructured materials is strongly related to the numerous grain boundaries and interfaces. This necessitates new design strategies to inherently improve the grain boundaries. Amongst other concepts the use of low‐energy boundaries has turned out to provide the most comprehensive improvement of the property spectrum targeting on ductility, toughness, as well as thermal and microstructural stability upon mechanical loading. Cyclic high‐pressure torsion (CHPT) is one prosperous technique to synthesis low‐angle boundaries (LAGB) at the nanoscale, enabling the production of high‐strength materials. We present here an in‐depth analysis of the structural evolution focusing on the effect of different strain amplitudes and accumulated strains as well as crystal structure to understand how these parameters need to be adjusted to optimize the fraction of LAGBs. Different than expected from classical fatigue testing, the crystal structure seems to play a minor role for the cell structure evolution at comparably large strain amplitudes. It is therefore a strong asset that CHPT is feasible to produce nanostructures LAGB boundaries in both FCC and BCC structures. Furthermore, by optimizing the geometry of the anvils, it enables homogenous structural sizes in the entire sample as in contrast to other techniques the strain gradient impact on LAGB formation can be overcome.This article is protected by copyright. All rights reserved.

Effects of black bean cell wall pectin by exogenous calcium ions: Insight into the metabolomics, physicochemical properties and anti-digestive capacity

In this work, the metabolomics, physicochemical and in vitro digestion properties of black beans influenced by different calcium ion solutions (0, 0.5 %, 1 %, and 2 %) were explored. The addition of calcium ions had a significant effect on the metabolic processing of black beans, including 16 differential metabolites and 4 metabolic pathways related to the cell wall. From the results of FT-IR and ICP-OES, it was confirmed that calcium ions can interact with COO− in non-methylated galacturonic acid in pectin to form calcium carboxylate strengthening the middle lamellae of the cell wall. Based on this mechanism, the soaked beans with an intact and dense cell structure were verified by the analyses of SEM and CLSM. Compared with other soaked beans, BB-2 exhibited lower cell permeability with electrical conductivity value decreased to 0.60 μs·cm−1. Additionally, BB-2 demonstrated slower digestion properties with digestion rate coefficient at 0.0020 min−1 and digestion extent only at 30.83 %, which is attributed to its increasingly compact cell wall and densely cellular matrix. This study illustrates the effect of calcium ions on the cellular structure of black beans, providing an effective process method for low glycemic index diets.

Dicyclohexylcarbodiimide and disodium succinate regulate the pulp softening and breakdown in fresh longan by modulating the metabolism of cell wall polysaccharides

Cell wall polysaccharides (CWP) are an important component of cell structure, and its content variation is a primary factor affecting the texture of fresh longan. The influences of dicyclohexylcarbodiimide (DCC) and disodium succinate (DS) treatments on the pulp softening and pulp breakdown, and their relation to CWP metabolism in pulp of longan fruit were explored. Compared with the control longan, DCC-treated fruit showed lower value of pulp firmness, higher index of pulp breakdown, higher expression levels of cell wall disassembly enzymes (CWDEs)-related genes (DlPME1, DlPME3, DlPG1, Dlβ-Gal1, Dlβ-Gal16, DlCx7, DlXET3, DlXET27), and higher activities of CWDEs including pectin methyl esterase (PME), polygalacturonase (PG), β-galactosidase (β-Gal), cellulase (Cx), xyloglucan endotransglycosylase (XET), lower values of cell wall materials, and lower levels of CWP including ionic-soluble pectin, covalent-soluble pectin, cellulose, and hemicellulose. Whereas, the opposite effects were exhibited in DS-treated fruit. The above data indicate that DCC-hastened longan pulp softening and pulp breakdown was due to the up-regulating expressions of CWDEs-related genes, the activating activities of CWDEs, and the accelerating CWP disassembly by DCC treatment. Whereas, DS repressed longan pulp softening and pulp breakdown through down-regulating the expressions of CWDEs-related genes, inhibiting CWDEs activities, and reducing CWP degradation.

Challenges and innovations in CAR-T cell therapy: a comprehensive analysis.

Recent years have seen a marked increase in research on chimeric antigen receptor T (CAR-T) cells, with specific relevance to the treatment of hematological malignancies. Here, the structural principles, iterative processes, and target selection of CAR-T cells for therapeutic applications are described in detail, as well as the challenges faced in the treatment of solid tumors and hematological malignancies. These challenges include insufficient infiltration of cells, off-target effects, cytokine release syndrome, and tumor lysis syndrome. In addition, directions in the iterative development of CAR-T cell therapy are discussed, including modifications of CAR-T cell structures, improvements in specificity using multi-targets and novel targets, the use of Boolean logic gates to minimize off-target effects and control toxicity, and the adoption of additional protection mechanisms to improve the durability of CAR-T cell treatment. This review provides ideas and strategies for the development of CAR-T cell therapy through an in-depth exploration of the underlying mechanisms of action of CAR-T cells and their potential for innovative modification.

Isolation of Potential Azo dye Degrading/Tolerating Bacteria from Polluted Environment

Various industries including the food and textile industries result in the release of azo dyes into the environment. These dyes are known to exert toxic effects on humans, animal and plants. Biological methods of azo dye bioremediation is a solution for the detoxification of azo dye in the environment. The present study was undertaken to isolate bacteria with potential for azo dye bioremediation. From five polluted environment samples, eight bacteria were isolated in azo dye supplemented Nutrient agar. Six isolates (75%, n=8) decolorized azo dye completely following 24 hours of incubation. The control tube with no bacterial inoculation remained blue, indicating that only microbial biotransformation processes were taking place. In each case, a blue-colored ring remained at the top, indicating the anoxic nature of the dye decolorization process. All isolates grew in presence of 400 ppm, 60% tolerated 600 ppm and 20% tolerated 800 ppm, whereas 1000ppm was inhibitory for growth of all isolates. Dead autoclaved cells of three representative isolates were tested for biosorption potential. Only one isolate turned the methylene blue supplemented nutrient broth colorless. This explains that this isolate was not metabolizing methylene blue rather it bound the dye to the cell structure. Two isolates did not show biosorption abilities indicating that their mechanism of bioremediation was enzymatic reduction. 16s rDNA sequencing identified two of the isolates as Lysinibacillus capsici and Stenotrophomonas muris. Bangladesh J Microbiol, Volume 40, Number 2, December 2023, pp 56-59

Enhancing efficiency of Sb2Se3 solar cell through optimized optical and electrical properties with Bi-layer absorber

In this study, an innovative solar cell utilizing antimony selenide (Sb2Se3) as a base material and incorporating a dual absorber layer is comprehensively examined using the Solar Cell Capacitance Simulator (SCAPS-1D) tool. The aim is to assess the performance of the solar cell with different absorber layers in combination with Sb2Se3. Results demonstrate that the solar cell employing an organic CH3NH3SnI3 absorber layer alongside Sb2Se3 achieves superior efficiency compared to one with an inorganic CZTS absorber layer. The two absorber layers investigated are the inorganic Copper Zinc Tin Sulfide (CZTS) and the organic methylammonium tin iodide (CH3NH3SnI3 The dual absorber layer configuration proves advantageous by enhancing light absorption. The solar cell architecture comprises ZnO/i-ZnO/Sb2Se3/CZTS or CH3NH3SnI3/NiO layers, resulting in an improved efficiency of up to 36.70%. Throughout the analysis, parameters such as concentration, band gap, thickness, and temperature are systematically adjusted to evaluate the behavior of this unique solar cell structure. The findings from the study indicate a noticeable enhancement in the performance of Sb2Se3 solar cells when employing the bilayer absorber structure comprising Sb2Se3 and CH3NH3SnI3.

Density of lymphocytes in cortex and medulla substance of thymus particles of white rats in normal conditions and under influence of heavy metal salts during three months

The consumption of clean water is the most relevant today, but natural water is delivered to our homes through plastic, iron and galvanized pipes. Metal ions, which are part of the pipe material, can get into drinking water and affect the human body, in particular the thymus. That is why the aim of the work was to determine the density of large, medium and small lymphocytes in the cortex and medulla of the thymus lobules of outbred white male rats of reproductive age when consuming small doses of heavy metal salts with water for three months. The study was conducted on 40 outbred white male rats of reproductive age, which were divided into 4 groups: 1 group – control animals that consumed distilled water; 2 group of animals that consumed aqueous solutions – CuSO4·5H2O at a dose of 0.247 mg/dm3; 3 group – aqueous solution of ZnSO4·7H2O at a dose of 1.505 mg/dm3; group 4 – aqueous solution of FeSO4·7H2O at a dose of 0.5 mg/dm3. Histological, electron microscopic and morphometric research methods were used to study the density of large, medium and small lymphocytes in different zones of the thymus lobules. It was found that in the control group of rats, the density of large lymphocytes is the highest in the subcapsular zone, and the lowest in the medulla. The density of medium lymphocytes is the lowest in the subcapsular zone. The density of small lymphocytes is the lowest in the medulla, and the highest in the cortico-medullary zone. When using CuSO4·5H2O salts with drinking water for three months, there were no significant changes in the density of lymphocytes compared to the control group, except for a slight decrease in the density of large lymphocytes in the cortex of the thymus lobules. The density of lymphocytes in the third group of animals that consumed zinc salts (ZnSO4·7H2O) with drinking water changes significantly: the density of large lymphocytes in the subcapsular zone decreases by 2.3 times, in the cortico-medullary zone it increases by 4.7 times, and in the medulla it increases by 2.7 times; the density of medium lymphocytes decreases in the subcapsular zone by 2 times; the density of small lymphocytes decreases by 1.5 times in the subcapsular zone, in the cortex and cortico-medullary zone – decreases by 1.2 times, and in the medulla by 1.1 times. When using FeSO4·7H2O salts with drinking water for three months, no special changes in the density of lymphocytes were noted: a decrease in the density of large lymphocytes in the subcapsular zone by 1.5 times and by 1.3 times in the cortex was observed; the density of medium lymphocytes decreases by 1.2 times in the cortex, and the density of small lymphocytes decreases by 1.2 times in the subcapsular zone and cortex, and increases by 1.2 times in the medulla, compared to the control group of animals. Ultrastructural changes in the structure of lymphocytes and reticuloepithelial cells were not detected when heavy metal salts were consumed with water. Thus, the study showed that the most toxic for the body are zinc salts (ZnSO4·7H2O), the consumption of which with drinking water in small doses for three months led to significant changes in the density of lymphocytes, compared to the control group experimental animals.

Morphological, Physiological, Biochemical and Metabolite Analyses of Parenchyma Cells Reveal Heartwood Formation Mechanism of Schima superba

A sapwood tree is a species in which the sapwood does not differ significantly from the heartwood and cannot be classified by shades of color. It is generally accepted that heartwood has a higher economic value than sapwood, but most of the studies related to heartwood formation have focused on heartwood trees, with less research on sapwood trees. In this paper, we take the sapwood tree Schima superba as the research object and analyze the physiological and biochemical changes in the process of heartwood formation by studying the anatomical structure of parenchyma cells, and then further explore the main categories of metabolites and compositional changes. The results showed that during heartwood formation, the parenchyma cells become inactive and the nucleus disappears, while at the same time, the storage substance starch is gradually degraded under the action of enzymes and transformed into secondary metabolites, which include terpenoids, phenols and alkaloids. The accumulation of white and colorless compounds in large quantities in the heartwood, which has some effect on the heartwood color, is an important reason why the heartwood in Schima superba shows normal formation but no difference in color from the sapwood. This study fills a gap in the mechanism of heartwood formation in sapwood trees.

Using origami and Shrinky Dinks to create active learning activities to tackle two microbiology concepts: cell structure differences and operon regulation.

This paper presents two low-cost hands-on activities designed to enhance student understanding and address the pedagogical challenges faced by microbiology professors in teaching concepts related to cell structure and gene regulation. In the first activity, we used Shrinky Dinks and Jeopardy-style game questions to explore the differences between prokaryotic and eukaryotic cells. Students have to collect pieces and physically build their cell models. The second activity uses origami organelles sets from Edvotek to illustrate the regulation of gene expression in the lac and trp operons, incorporating mutation scenarios for analysis. The intended audience comprises undergraduate students in microbiology, including biology, pre-medical studies, and health profession majors. The activities were deployed in three microbiology lectures, and students were surveyed. Students' feedback highlights the efficacy of the hands-on approach and increased class participation, as two of the recurring words in the students' survey were "helpful" and "fun."

Numerical Study of Graded CZT (S, Se) Solar Cell with 2D Transition Metal Dichalcogenide Tungsten Disulfide (WS2) as a Buffer Layer

Recently, there has been a surge of research interest in exploring solar cells based on Cu2ZnSn(S, Se)4 (CZTSSe) for enhanced efficiencies. Traditionally, CdS has served as the buffer layer in these solar cells. However, there is growing scientific exploration aimed at replacing CdS with alternative materials. This work focuses on leveraging a graded CZTSSe absorber layer alongside tungsten disulfide (WS2) 2D transition metal dichalcogenides. WS2 semiconductor as buffer layer is less price, low toxicity with high‐stability, and its performance is compared to that of CdS/CZTSSe solar cells. This comparative study aims to assess the efficacy of the WS2/CZTSSe structure as a potential alternative to the conventional CdS/CZTSSe configuration, with the overarching objective of enhancing overall solar cell efficiency. Initially, to demonstrate the accuracy of our simulated results, a comparison is made between the reported experimental data of CdS/CZTSSe and the simulated data. This numerical investigation utilizes solar cell capacitance simulator ‐1D software. The primary focus of this research is to evaluate the effects of varying thicknesses and doping densities of the absorber and buffer layers, as well as WS2, CdS, and CZTSSe defect densities, on Voc, Jsc, fill factor (FF), and power conversion efficiency. The aim is to achieve optimal device performance through systematic optimization of these parameters. The findings reveal that the WS2/CZTSSe solar cell achieves the highest conversion efficiency of 14.38%, accompanied by a Voc of 0.6920 V, Jsc of 24.96 mA cm−2, and FF of 83.28%. This performance surpasses that of the CdS/CZTSSe configuration, which demonstrates an efficiency of 12.74%, Voc of 0.518 V, Jsc of 37.77 mA cm−2, and FF of 65.10%. These results hold significant promise for the practical implementation of WS2/CZTSSe solar cell structures, offering a pathway toward generating clean, pollution‐free, and cost‐effective energy solutions.

Biomineral-Based Composite Materials in Regenerative Medicine.

Regenerative medicine aims to address substantial defects by amplifying the body's natural regenerative abilities and preserving the health of tissues and organs. To achieve these goals, materials that can provide the spatial and biological support for cell proliferation and differentiation, as well as the micro-environment essential for the intended tissue, are needed. Scaffolds such as polymers and metallic materials provide three-dimensional structures for cells to attach to and grow in defects. These materials have limitations in terms of mechanical properties or biocompatibility. In contrast, biominerals are formed by living organisms through biomineralization, which also includes minerals created by replicating this process. Incorporating biominerals into conventional materials allows for enhanced strength, durability, and biocompatibility. Specifically, biominerals can improve the bond between the implant and tissue by mimicking the micro-environment. This enhances cell differentiation and tissue regeneration. Furthermore, biomineral composites have wound healing and antimicrobial properties, which can aid in wound repair. Additionally, biominerals can be engineered as drug carriers, which can efficiently deliver drugs to their intended targets, minimizing side effects and increasing therapeutic efficacy. This article examines the role of biominerals and their composite materials in regenerative medicine applications and discusses their properties, synthesis methods, and potential uses.

A Study of Microstructural Tensile and Fatigue Properties Coupled with Digital Image Correlation of Hybrid Manufactured Inconel 718 Parts by Extrusion and Powder Bed Fusion

To overcome challenges associated with additive manufacturing (AM), a combination of AM and conventional manufacturing (CM) can be explored, enabling the production of hybrid structures. Nonetheless, realizing aerospace hybrid structures requires investigation into the process–structure–properties relationships of the AM and CM material and the interface zone between them. Herein, Inconel 718 is deposited onto extruded bars of the same material by powder bed fusion (PBF). The interface zone from the CM zone to the PBF zone is investigated using destructive and nondestructive testing. It is found that fractures during tensile tests occur in the CM zone. The PBF zone proves to be stronger than the CM zone (average yield strength of 1295 and 1167 MPa, respectively). A higher strength of PBF parts is related to the finer microstructure of δ‐phase precipitates and dendrite cell structure. The fatigue limit of the hybrid samples is high (Sa = 305 MPa, R = 0.1). Coupled fatigue and digital image correlation at the highest stress amplitude show distinctive plastic flow dominating the CM zone. In reverse, fracture of hybrid parts at lower stress amplitudes forms preferentially in the PBF zone because of process‐related defects (gas pores and lack of fusion).

Effects of Saikosaponin D on Apoptosis, Autophagy, and Morphological Structure of Intestinal Cells of Cajal with Functional Dyspepsia.

Functional dyspepsia (FD) is one of the most common gastrointestinal diseases, with a global prevalence of 10%-30%. However, the specific pathogenesis of FD has not yet been determined. As such, the aim of this study was to investigate the effects of saikosaponin D (SSD) administration on the apoptosis, autophagy, and morphological structure of the intestinal cells of Cajal (ICCs) in FD. Methods：A rat model of FD was constructed by stimulating the rat tail with a sponge clamp at one-third of the distal tail length. An autophagy model was constructed for ICCs using glutamate. The apoptosis rate in each group of cells was determined using flow cytometry. The expressions of ghrelin and substance P (SP) were detected using ELISA. The body weight and food intake of male and female rats in the SSD group were consistently higher than those in the model group. The SSD group showed substantial improvement compared with the model group, with no inflammatory cell infiltration and normal gastric mucosal structures. After intervention with SSD, the ultrastructure of the ICCs considerably improved and was clear. Compared with the model group, the expressions of LC3 I/II, ghrelin, and SP proteins in the SSD group were significantly upregulated, and the apoptosis rate was significantly reduced. The administration of SSD improved ICC morphology and structure, inhibited excessive autophagy, and improved FD, a gastrointestinal motility disorder, by regulating ghrelin and SP levels.

Effects of polypropylene micro(nano)plastics on soil bacterial and fungal community assembly in saline-alkaline wetlands

Microplastic pollution is a major environmental threat, especially to terrestrial ecosystems. To better understand the effects of microplastics on soil microbiota, the influence of micro- to nano-scale polypropylene plastics was investigated on microbial community diversity, functionality, co-occurrence, assembly, and their interaction with soil-plant using high-throughput sequencing approaches and multivariate analyses. The results showed that polypropylene micro/nano-plastics mainly reduced bacterial diversity, not fungal, and that plastic size had a stronger effect than concentration on the assembly of microbial communities. Nano-plastics decreased the complexity and connectivity of both bacterial and fungal networks compared to micro-plastics. Moreover, bacteria were more sensitive and deterministic to polypropylene micro/nano-plastic stress than fungi, as shown by their different growth rates, guanine-cytosine content, and cell structure. Interestingly, the dominant ecological process for bacteria shifted from stochastic drift to deterministic selection with polypropylene micro/nano-plastic exposure. Furthermore, nano-plastics directly or indirectly disrupted the interactions within intra-microbes and between soil-bacteria-plant by altering soil nutrients and stoichiometry (C:N:P) or plant diversity. Collectively, the results indicate that polypropylene nano-plastics pose more ecological risks to soil microbes and their plant-soil interactions. This study sheds light on the potential ecological consequences of polypropylene micro/nano-plastic pollution in terrestrial ecosystems.

Analysis of nickel oxide as a counter electrode for dye-sensitized solar cells using OghmaNano software

Dye-sensitized solar cells (DSSCs), a promising green technology, convert solar energy into electricity more cost-effectively than traditional solar cells. While platinum (Pt) is commonly used in DSSCs, its high cost and toxicity limit practical applications. Recent research aims to develop low-cost counter electrodes with high efficiency. Nickel oxide (NiO), a p-type semiconductor with a wide bandgap, good transmittance, and suitable work function, emerges as a potential alternative for counter electrode of DSSCs. In this work, DSSCs with NiO of thicknesses varying from 100 nm to 1000 nm were simulated to determine its influence on photovoltaic performance using OghmaNano software. The structure of simulated solar cells consists of NiO as counter electrode, zinc oxide (ZnO) as photoanode, N719 as dyes, electrolyte as charge carrier transport, and fluorine-doped tin oxide (FTO) as a contact layer. There are five data of NiO used as an active layer. From the simulation results, NiO-doped gold exhibits the highest power conversion efficiency (PCE) of 15.95% at a thickness of 700 nm, while pure NiO shows the lowest PCE with 4.53% at a thickness of 600 nm. These results have demonstrated that NiO can replace Pt as a counter electrode for DSSCs and doping plays a vital role in increasing efficiency.

Mitochondria of T Lymphocytes Promote Anti-Pulmonary Tumor Immune Response.

B-cell lymphoma 2 (Bcl-2), a protein involved in apoptosis, has been proven to have carcinogenic potential and is well documented. With the recent advancement in optical technology, it has become possible to observe subcellular organelles such as mitochondria in real-time without the need for staining. Consequently, we have examined the movement of mitochondria in cancer cells, correlating it with the regulation of Bcl-2. Using a tomographic microscope, which can detect the internal structure of cells, we observed lung tumor cells. Cells were exposed to a laser beam (λ = 520 nm) inclined at 45°, and holographic images were recorded up to a depth of 30 µm of reconstruction. Intriguingly, lung tumor cells rapidly expelled mitochondria upon the attachment of Bcl-2 or B-cell lymphoma extra-large (Bcl-xL) inhibitors. On the other hand, we observed that tumor cells hijack mitochondria from T cells. The hijacked mitochondria were not immediately linked to tumor cell death, but they played a role in assisting granzyme B-induced tumor cell death. Due to lower levels of Bcl-2 and Bcl-xL on the mitochondria of T cells compared to lung tumor cells, immune cells depleted of Bcl-2 and Bcl-xL were co-cultured with the tumor cells. As a result, a more effective tumor cell death induced by granzyme B was observed. Additionally, further enhanced anticancer immune response was observed in vivo. Together, we show that modified mitochondria of T cells can provide potential novel strategies towards tumor cell death.