Trimeric Structure Research Articles

On‐Demand Fabrication and Manipulation of Single Plasmonic Trimers for Ultrasensitive Enantiomer Detection

AbstractThe capability of plasmonic nanostructures in generating superchiral near‐fields holds great potential for a wide range of applications, including enantioselective sensing, medical diagnosis, and chirality‐based bioimaging. To implement high‐performance chiral nanophotonic devices, achieving in situ tuning of chiroptical activity in plasmonic nanostructures is highly desirable yet remains a formidable challenge. Here, a straightforward method is developed for deterministic assembly of plasmonic nanosphere trimers using spectroscopy‐assisted nano‐manipulation. The technique offers in situ, real‐time, and site‐specific control over the chiroptical response of trimers by adjusting their vertex angle and in‐plane orientation. The combination of numerical simulations with the Born‐Kuhn model reveals that oblique excitation effectively induces the symmetry breaking of the trimer structure, resulting in a preferential response of two distinct hybridized plasmonic modes to the handedness of light. Consequently, this yields a significant chiroptical response with the g factor up to 0.37. Remarkably, the trimer with an optimized obtuse angle exhibits a 193‐fold enhancement of optical chirality density, enabling the detection of molecular chirality with a record‐large spectral dissymmetric factor of 12 nm. The study facilitates the rational design of plasmonic nanostructures, offering promising prospects for chiral sensing at the single‐molecule level and asymmetric photocatalysis.

Architectural organization and in situ fusion protein structure of lymphocytic choriomeningitis virus.

The impact of COVID-19 on public health has highlighted the importance of understanding zoonotic pathogens. Lymphocytic choriomeningitis virus (LCMV) is a rodent-borne human pathogen that causes hemorrhagic fever. Herein, we describe the in situ structure of LCMV proteins and their architectural organization on the viral envelope and around the nucleocapsid. The virion structure reveals the distribution of the surface glycoprotein complex (GPC) and the contact points between the viral envelope and the underlying matrix protein, as well as the association with the nucleocapsid. The morphology and sizes of virions, as well as the number of RNA polymerase L inside each virion vary greatly, highlighting the fast-changing nature of LCMV. A comparison between the in situ GPC trimeric structure and prior ectodomain structures identifies the transmembrane and endo domains of GPC and key interactions among its subunits. The work provides new insights into LCMV assembly and informs future structure-guided vaccine design.

Protein mimics of fusion core from SARS-CoV-1 can inhibit SARS-CoV-2 entry

Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) is a member of the genus Betacoronavirus (subgenus Sarbecovirus) and shares significant genomic and phylogenetic similarities with severe acute respiratory syndrome coronavirus 1 (SARS-CoV-1). SARS-CoV-2 infection occurs through membrane fusion between the virus and host cell membranes, which is facilitated by the spike glycoprotein subunit 2 (S2). The folding of three heptad-repeat regions 1 (HR1) into a central trimeric core structure, along with the binding of three heptad-repeat regions 2 (HR2) in an antiparallel manner within the groove formed between the HR1 regions, which provides the driving force for membrane fusion. In this study, trimeric and monomeric six-helix bundles (6HB) were created by combining various truncations of the sequences from SARS-CoV-2 HR1 and HR2. In addition, monomeric five-helix bundles (5HB) were constructed using a similar method. Finally, we demonstrated a protein mimic, 5HB_V1 (from SARS-CoV-1), that exhibits activity in inhibiting SARS-CoV-2. These findings suggest a strategy to design monomeric 6HB and 5HB based on the SARS-CoV-2 fusion core: maintain the flanking sequences outside the α-helix region in HR2 and introduce point mutations to enhance hydrogen bonding between the helix bundles. The 5HB could be a target for designing new inhibitors against SARS-CoV-1 and SARS-CoV-2.

Structure-based validation of recombinant light-harvesting complex II.

Light-harvesting complex II (LHCII) captures sunlight and dissipates excess energy to drive photosynthesis. To elucidate this mechanism, the individual optical properties of pigments in the LHCII protein must be identified. In vitro reconstitution with apoproteins synthesized by Escherichia coli and pigment-lipid mixtures from natural sources is an effective approach; however, the local environment surrounding each pigment within reconstituted LHCII (rLHCII) has only been indirectly estimated using spectroscopic and biochemical methods. Here, we used cryo-electron microscopy to determine the 3D structure of the rLHCII trimer and found that rLHCII exhibited a structure that was virtually identical to that of native LHCII, with a few exceptions: some C-terminal amino acids were not visible, likely due to aggregation of the His-tags; a carotenoid at the V1 site was not visible; and at site 614 showed mixed occupancy by both chlorophyll a and b molecules. Our observations confirmed the applicability of the in vitro reconstitution technique.

Structural insights into CXCR4 modulation and oligomerization.

Activation of the chemokine receptor CXCR4 by its chemokine ligand CXCL12 regulates diverse cellular processes. Previously reported crystal structures of CXCR4 revealed the architecture of an inactive, homodimeric receptor. However, many structural aspects of CXCR4 remain poorly understood. Here, we use cryo-electron microscopy to investigate various modes of human CXCR4 regulation. CXCL12 activates CXCR4 by inserting its N terminus deep into the CXCR4 orthosteric pocket. The binding of US Food and Drug Administration-approved antagonist AMD3100 is stabilized by electrostatic interactions with acidic residues in the seven-transmembrane-helix bundle. A potent antibody blocker, REGN7663, binds across the extracellular face of CXCR4 and inserts its complementarity-determining region H3 loop into the orthosteric pocket. Trimeric and tetrameric structures of CXCR4 reveal modes of G-protein-coupled receptor oligomerization. We show that CXCR4 adopts distinct subunit conformations in trimeric and tetrameric assemblies, highlighting how oligomerization could allosterically regulate chemokine receptor function.

Hydrogen bonding in 2,2,2-trifluoroethanol.

2,2,2-Trifluoroethanol (TFE) is known as a membrane mimetic solvent. The IR spectrum, 1H NMR spectrum, 13C NMR spin‒lattice relaxation times (T1), and nuclear Overhauser effect (NOE) data are consistent with extensive hydrogen bonding in TFE, but do not lead to structural features of the hydrogen bonding. Hence, DFT computations were carried out. The results predict the existence of a set of H-bonded dimers and trimers. The bond lengths and dihedral angles in these complexes are obtained, together with their dissociation energies. Computations were also performed for the geometry of the two conformers of the isolated monomer. The structure of one of the dimers consists of a 7-member cyclic fragment with a free CF3CH2 side chain. One set of the trimer structures involves the OH of a third monomer H-bonding to one of the F atoms in the CF3 group of the side chain of this dimer, thereby creating three trimer isomers. A fourth trimer cluster is formed from three monomers in which three OH∙∙∙O bonds create a cyclic fragment with three CF3CH2 side chains. The high dissociation energy (with respect to three monomers) indicates the high stability of the trimer complexes. The structural features of the trimer complexes resemble the structure of a conventional liquid crystal molecule and are postulated to resemble the latter in properties and function in solution, but at a much shorter timescale because of the noncovalent bonding. This hydrogen bonding phenomenon of TFE may be related to its function as a membrane memetic solvent. Initially, IR and NMR spectroscopic methods were used. Standard procedures were followed. For the computations, a hybrid DFT method with empirical dispersion, ωB97X-D, was used. The basis set, 6-311++G**, is of triple-ζ quality, in which polarization functions and diffuse functions were added for all atoms.

A chimeric mRNA vaccine of S-RBD with HA conferring broad protection against influenza and COVID-19 variants.

Influenza and coronavirus disease 2019 (COVID-19) represent two respiratory diseases that have significantly impacted global health, resulting in substantial disease burden and mortality. An optimal solution would be a combined vaccine capable of addressing both diseases, thereby obviating the need for multiple vaccinations. Previously, we conceived a chimeric protein subunit vaccine targeting both influenza virus and severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), utilizing the receptor binding domain of spike protein (S-RBD) and the stalk region of hemagglutinin protein (HA-stalk) components. By integrating the S-RBD from the SARS-CoV-2 Delta variant with the headless hemagglutinin (HA) from H1N1 influenza virus, we constructed stable trimeric structures that remain accessible to neutralizing antibodies. This vaccine has demonstrated its potential by conferring protection against a spectrum of strains in mouse models. In this study, we designed an mRNA vaccine candidate encoding the chimeric antigen. The resultant humoral and cellular immune responses were meticulously evaluated in mouse models. Furthermore, the protective efficacy of the vaccine was rigorously examined through challenges with either homologous or heterologous influenza viruses or SARS-CoV-2 strains. Our findings reveal that the mRNA vaccine exhibited robust immunogenicity, engendering high and sustained levels of neutralizing antibodies accompanied by robust and persistent cellular immunity. Notably, this vaccine effectively afforded complete protection to mice against H1N1 or heterosubtypic H5N8 subtypes, as well as the SARS-CoV-2 Delta and Omicron BA.2 variants. Additionally, our mRNA vaccine design can be easily adapted from Delta RBD to Omicron RBD antigens, providing protection against emerging variants. The development of two-in-one vaccine targeting both influenza and COVID-19, incorporating the mRNA platform, may provide a versatile approach to combating future pandemics.

Molecular aggregates of merocyanine 540 with different surfactant systems

Merocyanine 540 (MC540) is a dye molecule that displays diverse photophysical features in varying environments. Micelle environments exert intriguing influences on the behavior of such molecules. This study’s primary objective is to examine the spectroscopic and thermodynamic consequences with different surfactants on the aggregation tendency of MC540. Interactions of MC540 with negatively charged sodium dodecyl sulphate (SDS), neutral triton X-100 (TX100) and positively charged hexadecyltrimethylammonium bromide (CTAB) surfactants were investigated by using molecular absorption spectroscopy. The interactions of MC540 with the SDS, CTAB, and TX100 under and above critical micelle concentration (CMC) were studied and H aggregate formation was observed under CMC. This H aggregate structure leaded to a shift towards monomer band above the CMC of SDS, TX100, CTAB according to the H aggregate-monomer equilibrium. Moreover, it was firstly observed that MC540 has trimer type aggregate structures as well with varying CTAB concentrations. In addition, by using temperature studies, thermodynamic function ΔH⁰dis values, dimer and trimer structures, were calculated as 6.10 kcal/mol, and 8.94 kcal/mol, respectively, and ΔS⁰dis values for dimer and trimer structures as −3.87 cal/Kmol, and −18.39 cal/Kmol, respectively. The calculated thermodynamic functions showed that disaggregation of aggregates is endothermic in nature and entropy is the driving force.

HPV induced R-loop formation represses innate immune gene expression while activating DNA damage repair pathways.

R-loops are trimeric nucleic acid structures that form when an RNA molecule hybridizes with its complementary DNA strand, displacing the opposite strand. These structures regulate transcription as well as replication, but aberrant R-loops can form, leading to DNA breaks and genomic instability if unresolved. R-loop levels are elevated in many cancers as well as cells that maintain high-risk human papillomaviruses. We investigated how the distribution as well as function of R-loops changed between normal keratinocytes and HPV positive cells derived from a precancerous lesion of the cervix (CIN I). The levels of R-loops associated with cellular genes were found to be up to 10-fold higher in HPV positive cells than in normal keratinocytes while increases at ALU1 elements increased by up to 500-fold. The presence of enhanced R-loops resulted in altered levels of gene transcription, with equal numbers increased as decreased. While no uniform global effects on transcription due to the enhanced levels of R-loops were detected, genes in several pathways were coordinately increased or decreased in expression only in the HPV positive cells. This included the downregulation of genes in the innate immune pathway, such as DDX58, IL-6, STAT1, IFN-β, and NLRP3. All differentially expressed innate immune genes dependent on R-loops were also associated with H3K36me3 modified histones. Genes that were upregulated by the presence of R-loops in HPV positive cells included those in the DNA damage repair such as ATM, ATRX, and members of the Fanconi Anemia pathway. These genes exhibited a linkage between R-loops and H3K36me3 as well as γH2AX histone marks only in HPV positive cells. These studies identify a potential link in HPV positive cells between DNA damage repair as well as innate immune regulatory pathways with R-loops and γH2AX/H3K36me3 histone marks that may contribute to regulating important functions for HPV pathogenesis.

ACE2 from Pipistrellus abramus bats is a receptor for HKU5 coronaviruses.

The merbecovirus subgenus of coronaviruses includes Middle East Respiratory Syndrome Coronavirus (MERS-CoV), a zoonotic pathogen transmitted from dromedary camels to humans that causes severe respiratory disease. Viral discovery efforts have uncovered hundreds of merbecoviruses in different species across multiple continents, but few have been studied under laboratory conditions, leaving basic questions regarding their human threat potential unresolved. Viral entry into host cells is a critical step for transmission between hosts. Here, a scalable approach that assesses novel merbecovirus cell entry was developed and used to evaluate receptor use across the entire merbecovirus subgenus. Merbecoviruses are sorted into clades based on the receptor-binding domain of the spike glycoprotein. Receptor tropism is clade-specific, with the clade including MERS-CoV using DPP4 and multiple clades using ACE2, including HKU5 bat coronaviruses. Mutational analysis identified possible structural limitations to HKU5 adaptability and a cryo-EM structure of the HKU5-20s spike trimer revealed only 'down' RBDs.

2,4-Diarylpyrroles: synthesis, characterization and crystallographic insights.

Three 2,4-diarylpyrroles were synthesized starting from 4-nitrobutanones and the crystal structures of two derivatives were analysed. These are 4-(4-methoxyphenyl)-2-(thiophen-2-yl)-1H-pyrrole, C15H13NOS, and 3-(4-bromophenyl)-2-nitroso-5-phenyl-1H-pyrrole, C16H11BrN2O. Although pyrroles without substituents at the α-position with respect to the N atom are very air sensitive and tend to polymerize, we succeeded in growing an adequate crystal for X-ray diffraction analysis. Further derivatization using sodium nitrite afforded a nitrosyl pyrrole derivative, which crystallized in the triclinic space group P-1 with Z= 6. Thus, herein we report the first crystal structure of a nitrosyl pyrrole. Interestingly, the co-operative hydrogen bonds in this NO-substituted pyrrole lead to a trimeric structure with bifurcated halogen bonds at the ends, forming a two-dimensional (2D) layer with interstitial voids having a radius of 5 Å, similar to some reported macrocyclic porphyrins.

O-glycosylation of SARS-CoV-2 spike protein by host O-glycosyltransferase strengthens its trimeric structure.

Protein O-glycosylation, also known as mucin-type O-glycosylation, is one of the most abundant glycosylation in mammalian cells. It is initially catalyzed by a family of polypeptide GalNAc transferases (ppGalNAc-Ts). The trimeric spike protein (S) of SARS-CoV-2 is highly glycosylated and facilitates the virus's entry into host cells and membrane fusion of the virus. However, the functions and relationship between host ppGalNAc-Ts and O-glycosylation on the S protein remain unclear. Herein, we identify 15 O-glycosites and 10 distinct O-glycan structures on the S protein using an HCD-product-dependent triggered ETD mass spectrometric analysis. We observe that the isoenzyme T6 of ppGalNAc-Ts (ppGalNAc-T6) exhibits high O-glycosylation activity for the S protein, as demonstrated by an on-chip catalytic assay. Overexpression of ppGalNAc-T6 in HEK293 cells significantly enhances the O-glycosylation level of the S protein, not only by adding new O-glycosites but also by increasing O-glycan heterogeneity. Molecular dynamics simulations reveal that O-glycosylation on the protomer-interface regions, modified by ppGalNAc-T6, potentially stabilizes the trimeric S protein structure by establishing hydrogen bonds and non-polar interactions between adjacent protomers. Furthermore, mutation frequency analysis indicates that most O-glycosites of the S protein are conserved during the evolution of SARS-CoV-2 variants. Taken together, our finding demonstrate that host O-glycosyltransferases dynamically regulate the O-glycosylation of the S protein, which may influence the trimeric structural stability of the protein. This work provides structural insights into the functional role of specific host O-glycosyltransferases in regulating the O-glycosylation of viral envelope proteins.

Fluorometric and naked eye detection of cadmium ion by reduced Schiff base zinc-based probe in potable water: Theoretical and experimental approach

Alarmingly increasing population and industrial growth has immensely affected water bodies and potable water sources by elution of many heavy toxic metal ions, including cadmium (II). The rising threat has demanded easy and cost-effective detection of this heavy metal ion so as to spread widely across the masses and eliminate the poisoning of water. With this aim, we have synthesized a zinc-based fluorescent probe (rBDZn) having reduced Schiff base backbone with N- and O- donor atoms derived from 5-bromosalicaldehyde and 2,2-dimethylpropane-1,3-diamine, characterized with the aid of single crystal X-ray analysis, revealing a trimeric structure linearly bridged by azide ion. The complex has been found to exhibit a cyan blue fluorescence getting ‘turned-off’ in the presence of cadmium ion selectively along with many other cations in the aqueous solution together with a naked-eye visible color change from pale yellow to colorless. Steady-state and time-resolved fluorescence titration, and absorption titration experiments were performed. During the investigation of the sensing pathway it is observed that the detection of Cd2+ is being associated with the formation of the cadmium complex rBDCd from the probe rBDZn and this has been explained though a probable mechanism. In support of the fact a single crystal of Cd-substituted complex have been isolated and verified with single crystal XRD and computational calculations. Proper justification of the selectivity of the probe towards cadmium ion with a very low detection limit of 1.72 nM enables its genuine impact in the pollution management.

Circular Heterochiral Titanium-Based Self-Assembled Architectures.

Circular trinuclear helicates have been synthesized from a bis-biphenol strand (LH4), titanium isopropoxide, and various diimine ligands. These self-assembled architectures constructed around three TiO4N2 nodes have a heterochiral structure (C1 symmetry) when 2,2'-bipyridine (A), 4,4'-dimethyl-2,2'-bipyridine (B), 4,4'-bromo-2,2'-bipyridine (C), or 4,4'-dimethyl-2,2'-bipyrimidine (D) is employed. Within these complexes, one nitrogen ligand is endo-positioned inside the metallo-macrocycle, whereas the other two diimine ligands point outside the helicate framework. This investigation highlights that the nitrogen ligand which does not participate in the helicate framework of the complex controls the overall symmetry of the helicate since the 2,2'-bipyrimidine chelate (F) ends in the formation of a homochiral aggregate (C3 symmetry). The lack of symmetry found in the solid state for the trinuclear species ([Ti3L3(B)3], [Ti3L3(C)3], and [Ti3L3(D)3]) is observed for these complexes in solution (dichloromethane or chloroform). Remarkably, the 2,2'-bipyrazine ligand (ligand E) ends in the formation of a hexameric aggregate formulated as [Ti6L6(E)6], whereas the use of 4,4'-dimethyl-2,2'-bipyrimidine (ligand D) permits to generate the dinuclear complexes ([Ti2L(D)2(OiPr)4] and [Ti2L2(D)2]) in addition to the trimeric structure [Ti3L3(D)3]. The behavior of [Ti3L3(A)3] in solution, on the other hand, is unique since an equilibrium between the homochiral and the heterochiral form is reached within 17 days after the complex has been dissolved in dichloromethane (C3-[Ti3L3(A)3]/C1-[Ti3L3(A)3] ratio = 0.3). In chloroform, the heterochiral form of [Ti3L3(A)3] is stable for the same period of time, evidencing the dependence of this stereochemical transformation toward the solvent medium. The thermodynamic and kinetic parameters linked to this stereochemical equilibrium have been obtained and point to the fact that the transformation is intramolecular and not induced by the presence of external ligands. The thermodynamic constant of the C1-[Ti3L3(A)3]/C3-[Ti3L3(A)3] equilibrium is found to be K = 0.34 ± 10%. Further evidence to rationalize this solvent-induced symmetry switch is obtained via a DFT calculation and classical molecular dynamics. In particular, this computational investigation elucidates the reason why the stereochemical transformation of a heterochiral architecture into a homochiral structure is possible only for a trinuclear assembly containing ligand A.

Discovery of a New Polymorph of 5-Methoxy-1H-Indole-2-Carboxylic Acid: Characterization by X-ray Diffraction, Infrared Spectroscopy, and DFT Calculations.

This study presents a new 5-methoxy-1H-indole-2-carboxylic acid (MI2CA) polymorph investigated by single-crystal X-ray diffraction, infrared spectroscopy, and density functional theory (ωB97X-D) calculations employing two basis sets (6-31++G(d,p) and aug-cc-pVTZ). The compound crystallizes in the monoclinic system, space group P21/c (a = 4.0305(2) Å, b = 13.0346(6) Å, c = 17.2042(9) Å, β = 91.871(5)°, Z = 4). In the crystalline structure, the formation of cyclic dimers via double hydrogen bonds O-H⋯O between MI2CA molecules was observed. Interactions between the NH groups of the indole rings and the adjacent methoxy groups, as well as C-H⋯O contacts, significantly influence the spatial arrangement of molecules. The results from DFT calculations, including dimeric and trimeric structures, agree well with the experimental structural and spectroscopic data. Analysis of the infrared spectra confirms the conclusions drawn from X-ray diffraction studies and reveals differences between the IR spectra of the newly obtained polymorph and that reported earlier in the literature. This comprehensive study sheds some light on the MI2CA polymorphism and is important for a potential pharmacological applications of this compound.

Hierarchically Responsive Alternating Nano‐Copolymers with Tailored Interparticle Bonds

AbstractSelf‐assembly of inorganic nanoparticles (NPs) is an essential tool for constructing structured materials with a wide range of applications. However, achieving ordered assembly structures with externally programmable properties in binary NP systems remains challenging. In this work, we assemble binary inorganic NPs into hierarchically pH‐responsive alternating copolymer‐like nanostructures in an aqueous medium by engineering the interparticle electrostatic interactions. The polymer‐grafted NPs bearing opposite charges are viewed as nanoscale monomers (“nanomers”), and copolymerized into alternating nano‐copolymers (ANCPs) driven by the formation of interparticle “bonds” between nanomers. The resulting ANCPs exhibit reversibly responsive “bond” length (i.e., the distance between nanomers) in response to the variation of pH in a range of ~7–10, allowing precise control over the surface plasmon resonance of ANCPs. Moreover, specific interparticle “bonds” can break up at pH≥11, leading to the dis‐assembly of ANCPs into molecule‐like dimers and trimers. These dimeric and trimeric structures can reassemble to form ANCPs owing to the resuming of interparticle “bonds”, when the pH value of the solution changes from 11 to 7. The hierarchically responsive nanostructures may find applications in such as biosensing, optical waveguide, and electronic devices.

Hierarchically Responsive Alternating Nano-Copolymers with Tailored Interparticle Bonds.

Self-assembly of inorganic nanoparticles (NPs) is an essential tool for constructing structured materials with a wide range of applications. However, achieving ordered assembly structures with externally programmable properties in binary NP systems remains challenging. In this work, we assemble binary inorganic NPs into hierarchically pH-responsive alternating copolymer-like nanostructures in an aqueous medium by engineering the interparticle electrostatic interactions. The polymer-grafted NPs bearing opposite charges are viewed as nanoscale monomers ("nanomers"), and copolymerized into alternating nano-copolymers (ANCPs) driven by the formation of interparticle "bonds" between nanomers. The resulting ANCPs exhibit reversibly responsive "bond" length (i.e., the distance between nanomers) in response to the variation of pH in a range of ~7-10, allowing precise control over the surface plasmon resonance of ANCPs. Moreover, specific interparticle "bonds" can break up at pH≥11, leading to the dis-assembly of ANCPs into molecule-like dimers and trimers. These dimeric and trimeric structures can reassemble to form ANCPs owing to the resuming of interparticle "bonds", when the pH value of the solution changes from 11 to 7. The hierarchically responsive nanostructures may find applications in such as biosensing, optical waveguide, and electronic devices.

Study on the Stability of Hydrogen-Bonded Energetic Material 3-Nitropyrazole under High Pressure

The stability of hydrogen-bonded energetic material 3-nitropyrazole (3-NP, C3H3N3O2) under high pressure was studied using a diamond anvil cell, Raman spectrometer, and simulation calculation. Under the hydrostatic experimental pressure and simulated pressure of 10 GPa, the optical Raman spectra, the change of cell parameters, and the Hirshfeld surface energy of 3-NP were obtained respectively. The analysis of the measured Raman spectra shows that the structure is still in original phase at 10 GPa pressure. The effects of pressure on cell parameters, molecular arrangement, and hydrogen bonding were observed by simulation calculation. Systematic analysis of the subtle structural changes, anisotropic characteristics, and various interactions of 3-NP shows that the stability of 3-NP is related to the special trimer structure.

Tethered Trimeric Small‐molecular Acceptors through Aromatic‐core Engineering for Highly Efficient and Thermally Stable Polymer Solar Cells

AbstractPolymer solar cells (PSCs) rely on a blend of small molecular acceptors (SMAs) with polymer donors, where thermodynamic relaxation of SMAs poses critical concerns on operational stability. To tackle this issue, tethered SMAs, wherein multiple SMA‐subunits are connected to the aromatic‐core via flexible chains, are proposed. This design aims to an elevated glass transition temperature (Tg) for a dynamical control. However, attaining an elevated Tg value with additional SMA subunits introduces complexity to the molecular packing, posing a significant challenge in realizing both high stability and power conversion efficiency (PCE). In this study, we initiate isomer engineering on the benzene‐carboxylate core and find that meta‐positioned dimeric BDY‐β exhibits more favorable molecular packing compared to its para‐positioned counterpart, BDY‐α. With this encouraging result, we expand our approach by introducing an additional SMA unit onto the aromatic core of BDY‐β, maintaining a meta‐position relative to each SMA unit location in the tethered acceptor. This systematic aromatic‐core engineering results in a star‐shaped C3h‐positioned molecular geometry. The supramolecular interactions of SMA units in the trimer contribute to enhancements in Tg value, crystallinity, and a red‐shifted absorption compared to dimers. These characteristics result in a noteworthy increase in PCE to 18.24 %, coupled with a remarkable short‐circuit current density of 27.06 mA cm−2. More significantly, the trimer‐based devices delivered an excellent thermal stability with over 95 % of their initial efficiency after 1200 h thermal degradation. Our findings underscore the promise and feasibility of tethered trimeric structures in achieving highly ordered aggregation behavior and increased Tg value in PSCs, simultaneously improving in device efficiency and thermal stability.

Tethered Trimeric Small-molecular Acceptors through Aromatic-core Engineering for Highly Efficient and Thermally Stable Polymer Solar Cells.

Polymer solar cells (PSCs) rely on a blend of small molecular acceptors (SMAs) with polymer donors, where thermodynamic relaxation of SMAs poses critical concerns on operational stability. To tackle this issue, tethered SMAs, wherein multiple SMA-subunits are connected to the aromatic-core via flexible chains, are proposed. This design aims to an elevated glass transition temperature (Tg) for a dynamical control. However, attaining an elevated Tg value with additional SMA subunits introduces complexity to the molecular packing, posing a significant challenge in realizing both high stability and power conversion efficiency (PCE). In this study, we initiate isomer engineering on the benzene-carboxylate core and find that meta-positioned dimeric BDY-β exhibits more favorable molecular packing compared to its para-positioned counterpart, BDY-α. With this encouraging result, we expand our approach by introducing an additional SMA unit onto the aromatic core of BDY-β, maintaining a meta-position relative to each SMA unit location in the tethered acceptor. This systematic aromatic-core engineering results in a star-shaped C3h-positioned molecular geometry. The supramolecular interactions of SMA units in the trimer contribute to enhancements in Tg value, crystallinity, and a red-shifted absorption compared to dimers. These characteristics result in a noteworthy increase in PCE to 18.24 %, coupled with a remarkable short-circuit current density of 27.06 mA cm-2. More significantly, the trimer-based devices delivered an excellent thermal stability with over 95 % of their initial efficiency after 1200 h thermal degradation. Our findings underscore the promise and feasibility of tethered trimeric structures in achieving highly ordered aggregation behavior and increased Tg value in PSCs, simultaneously improving in device efficiency and thermal stability.