Structural Characteristics Research Articles

Cytological and metabolomic analysis of Citrus fruit to elucidate puffing disorder

Puffiness, a physiological disorder commonly observed during the ripening and post-harvest processes of fruits in Citrus reticulata, significantly affects the quality and shelf-life of citrus fruits. The complex array of factors contributing to puffiness has obscured the current understanding of its mechanistic basis. This study examined the puffing index (PI) of 12 citrus varieties at full ripeness, focusing on the albedo layer as a crucial tissue, and investigated the correlation between cellular structural characteristics, key primary metabolites and PI. The findings revealed that the cell gap difference and the number of lipid droplets were closely linked to PI. Chlorogenic acid, Ferulic acid, D-Galacturonic acid, D-Glucuronic acid, (9Z,11E)-Octadecadienoic acid, and 9(10)-EpOME were identified as pivotal primary metabolites for rind puffing. Determination of lignin, protopectin, cellulose and lipoxygenase content further validated the relationship between cell wall, lipid metabolism and rind puffing. This study furnishes novel insights into the mechanisms underlying puffing disorder.

Multi-parameter design of triply periodic minimal surface scaffolds: from geometry optimization to biomechanical simulation

This study introduces a multi-parameter design methodology to create triply periodic minimal surface (TPMS) scaffolds with predefined geometric characteristics. The level-set constant and unit cell lengths are systematically correlated with targeted porosity and minimum pore sizes. Network and sheet scaffolds featuring diamond, gyroid, and primitive level-set structures are generated. Three radially graded schemes are applied to each of the six scaffold type, accommodating radial variations in porosity and pore sizes. Computer simulations are conducted to assess the biomechanical performance of 18 scaffold models. Results disclose that diamond and gyroid scaffolds exhibit more expansive design ranges than primitive counterparts. While primitive scaffolds display the highest Young’s modulus and permeability, their lower yield strength and mesenchymal stem cell (MSC) adhesion render them unsuitable for bone scaffolds. Gyroid scaffolds demonstrate superior mechanical and permeability performances, albeit with slightly lower MSC adhesion than diamond scaffolds. Sheet scaffolds, characterized by more uniform material distribution, exhibit superior mechanical performance in various directions, despite slightly lower permeability. The higher specific surface area of sheet scaffolds contributes to elevated MSC adhesion. The stimulus factor analysis also revealed the superior differentiation potential of sheet scaffolds over network ones. The diamond sheet type demonstrated the optimal differentiation. Introducing radial gradations enhances axial mechanical performance at the expense of radial mechanical performance. Radially decreasing porosity displays the highest permeability, MSC adhesion, and differentiation capability, aligning with the structural characteristics of human bones. This study underscores the crucial need to balance diverse biomechanical properties of TPMS scaffolds for bone tissue engineering.

Preparation of Rehmanniae Radix Praeparata Polysaccharide Iron(III) Complex and Evaluation of Its Biological Activity.

This study extracted and purified a polysaccharide from Rehmanniae radix praeparata (RGP) with an average molecular weight. The structural characteristics of RGP and its iron (III) complex, RGP-Fe(III), were examined for their antioxidant properties and potential in treating iron deficiency anemia (IDA). Analysis revealed that RGP comprised Man, Rha, Gal, and Xyl, with a sugar residue skeleton featuring 1→3; 1→2, 3; and 1→2, 3, 4 linkages, among others. RGP-Fe(III) had a molecular weight of 4.39×104 Da. Notably, RGP-Fe(III) exhibited superior antioxidant activity compared to RGP alone. In IDA rat models, treatment with RGP-Fe(III) led to increased weight gain, restoration of key blood parameters including hemoglobin, red blood cells, and mean hemoglobin content, elevated serum iron levels, and decreased total iron-binding capacity. Histological examination revealed no observable toxic effects of RGP-Fe(III) on the liver and spleen. These findings suggest the potential of RGP-Fe(III) as a therapeutic agent for managing IDA and highlight its promising antioxidant properties.

Enhancing photocatalytic degradation of rhodamine B with visible-light-driven HCl-assisted Bi2O3 photocatalysts: Activity, mechanism, and pathways

This study utilized X-diffraction, BET, photoluminescence, UV–vis DRS, FTIR, SEM, XPS, TOC analysis, EPR, electrochemical measurements, and LC-MS to characterize the structural characteristics, morphology, optical properties, photocatalytic activity, surface electronic states, active compounds, and potential photodegradation pathways of rhodamine B (RhB) over as-prepared Bi2O3. The as-prepared Bi2O3 photocatalyst exhibited a narrow bandgap, which enabled efficient absorption of visible light, thereby contributing to its enhanced photocatalytic activity. Additionally, Bi2O3 exhibited a high degradation efficiency for RhB. with up to 96.8 % of RhB removed within 120 min at pH 3.0. The excellent photocatalytic performance of Bi2O3 can be attributed to the formation of the heterogeneous Bi2O3/BiOCl structure on the Bi2O3 surface in the presence of HCl. Moreover, the TOC analysis revealed that over 58.1 % of the carbon in the RhB solution was mineralized into CO2 after 120 min of irradiation. The effect of catalyst content, RhB concentration, initial pH, and inorganic anions on the photocatalytic degradation of RhB over Bi2O3 was examined. Furthermore, the active compounds and potential photocatalytic mechanism of the Bi2O3/BiOCl heterogeneous structure toward RhB were evaluated. The intermediates formed during RhB degradation were identified, and the corresponding degradation pathway was deduced via LC-MS.

Implication of Molecular Constraints Facilitating the Functional Evolution of Pseudomonas aeruginosa KPR2 into a Versatile α-Keto-Acid Reductase.

Theoretical concepts linking the structure, function, and evolution of a protein, while often intuitive, necessitate validation through investigations in real-world systems. Our study empirically explores the evolutionary implications of multiple gene copies in an organism by shedding light on the structure-function modulations observed in Pseudomonas aeruginosa's second copy of ketopantoate reductase (PaKPR2). We demonstrated with two apo structures that the typical active site cleft of the protein transforms into a two-sided pocket where a molecular gate made up of two residues controls the substrate entry site, resulting in its inactivity toward the natural substrate ketopantoate. Strikingly, this structural modification made the protein active against several important α-keto-acid substrates with varied efficiency. Structural constraints at the binding site for this altered functional trait were analyzed with two binary complexes that show the conserved residue microenvironment faces restricted movements due to domain closure. Finally, its mechanistic highlights gathered from a ternary complex structure help in delineating the molecular perspectives behind its kinetic cooperativity toward these broad range of substrates. Detailed structural characteristics of the protein presented here also identified four key amino acid residues responsible for its versatile α-keto-acid reductase activity, which can be further modified to improve its functional properties through protein engineering.

Label-free visualization of unfolding and crosslinking mediated protein aggregation in nonenzymatically glycated proteins.

Nonenzymatic glycation (NEG) unfolds and crosslinks proteins, resulting in aggregation. Label-free evaluation of such structural changes, without disturbing molecular integrity, would be beneficial for understanding the fundamental mechanisms of protein aggregation. The current study demonstrates the assessment of NEG-induced protein aggregation by combining autofluorescence (AF) spectroscopy and imaging. The methylglyoxal (MG) induced protein unfolding and the formation of cross-linking advanced glycation end-products (AGEs) leading to aggregation were evaluated using deep-UV-induced-autofluorescence (dUV-AF) spectroscopy in proteins with distinct structural characteristics. Since the AGEs formed on proteins are fluorescent, the study demonstrated the possibility of autofluorescence imaging of NEG-induced protein aggregates. Autofluorescence spectroscopy can potentially reveal molecular alterations such as protein unfolding and cross-linking. In contrast, AGE-based autofluorescence imaging offers a means to visually explore the structural arrangement of aggregates, regardless of whether they are amyloid or non-amyloid in nature.

The obstacle race to educational improvement: governance, policies, and practices in disadvantaged schools

Contemporary educational reforms emphasise school autonomy, performance-based management, and accountability as necessary policies for attaining improvement goals. Despite their widespread adoption, the configuration and enactment of these policies are discretionary and contingent, deeply influenced by the interaction of local contexts, organisational features, and teachers’ beliefs about policy and pedagogy. Apart from these challenges, schools serving disadvantaged students, often targeted for educational improvement, also struggle with significant organisational constraints and policy overload. This study explores how disadvantaged urban schools make sense of their policy environment and engage with the school improvement mandate through different logics and practices. The analytical framework stresses the policy filtering and adaptation processes that school actors undergo when tasked with multiple implementation demands, and how these interact with school contexts to produce diverse responses. This research is conducted in Catalonia, Spain, and adopts a sequential mixed-methods strategy, relying on interviews with principals and teachers, as well as survey and administrative data. The findings are organised in four ideal types of school responses to the improvement mandate, showing the diverging ways schools engage with policy. Disadvantaged schools exhibit diverse improvement approaches despite sharing structural characteristics, explained by the interaction of contextual factors and organisational characteristics. Each ideal type prioritises different aspects, such as performance, innovation, or inclusive practices. The heterogeneity of school responses highlights the necessity for targeted, context-sensitive support to ensure equitable educational practices.

Beta-irradiated ZnGa2O4:Sm3+ phosphor: Thermoluminescence glow curves and kinetic parameters via gel combustion synthesis

This study examines the X-ray Diffraction (XRD) characteristics of Sm3+-doped ZnGa2O4 phosphor, shedding light on its structural characteristics. The XRD data reveal distinctive peaks that represent the crystal's lattice structure. This provides the basis for a more detailed analysis of thermoluminescence (TL). Initially, the TL glow curves corresponding to different concentrations of Sm were analysed, leading to the identification of the most favorable Sm concentration. Subsequently, an investigation was conducted into the TL behavior of the material in response to varying doses within a broad spectrum of beta radiation, revealing a linear characteristic (b=1.075) across doses ranging from 0.1 Gy to 50 Gy. Following this, a reusability assessment was executed over three measurement sets, wherein it was ascertained that the deviation in peak area across ten cycles did not surpass 2 %. Furthermore, it was investigated how different heating rates ranging from 0.5 °C/s to 7 °C/s affect the TL curve of the material. To determine the TL trap parameters of the sample, Initial Rise (IR) and Computerized Glow Curve Deconvolution (CGCD) methods were employed. A consistent pattern of activation energy values was observed in both IR in the TM-Tstop experiment and CGCD analyses, indicating a uniform response to distinct energy levels within the sample. In terms of providing valuable insights into the characteristics of TL, these methods were found to be very effective. This contributed to a comprehensive understanding of charge carrier dynamics within the crystal lattice. Moreover, Peaks I, II, and III showed a linear response to applied doses, indicating the material's potential for dosimetry applications. The findings of this study not only provide insights into Sm3+-doped ZnGd2O4 phosphors' TL properties, but also enhance our understanding of how to optimize their radiation response.

Schlieren measurements of shock train flow fields in a supersonic cylindrical isolator at Mach 2

AbstractIn a supersonic cylindrical isolator at Mach 2, the structures and frequency characteristics of shock train flow fields were experimentally studied by the schlieren measurement method. According to the design principle of parallel light through schlieren windows in a cylindrical duct, a high-precision conformal optical window pair was designed and integratively processed before. Based on a self-built pipeline structure with conformal windows in a direct-connect wind tunnel under adjustable back-pressure conditions, the shock surfaces in a cylindrical isolator at Mach 2 were first captured by the schlieren method. Then, the schlieren photographs were corrected by a nonlinear image transformation algorithm for the restoration of real shock train structures, and the experimental results were compared with numerical simulation results quantitatively. Finally, the shock train positions were calculated by an image recognition algorithm to analyze the self-excited oscillation frequency characteristics of shock train structures. The methods and experiments in this study enriched optical observation methods of supersonic flows through non-rectangular cross-section isolators in scramjet. Graphical abstract

Living Biobanks of Organoids: Valuable Resource for Translational Research.

The emergence of organoids is considered a revolutionary model, changing the landscape of traditional translational research. These three-dimensional miniatures of human organs or tissues, cultivated from stem cells or biospecimens obtained from patients, faithfully replicate the structural and functional characteristics of specific target organs or tissues. In this extensive review, we explore the profound impact of organoids and assess the current state of living organoid biobanks, which are essential repositories for cryopreserving organoids derived from a variety of diseases. These resources hold significant value for translational research. We delve into the diverse origins of organoids, the underlying technologies, and their roles in recapitulating human development, disease modeling, as well as their potential applications in the pharmaceutical field. With a particular emphasis on biobanking organoids for prospective applications, we discuss how these advancements expedite the transition from bench to bedside translational research, thereby fostering personalized medicine and enriching our comprehension of human health.

Hydrogen storage on MgO supported TiMgn (n = 2–6) clusters: A first principle investigation

The current study explores the potential of MgO-supported finite-sized TiMgn (n = 2–6) nanoclusters as hydrogen storage materials, employing density functional theory with a spin-polarized generalized gradient approximation (GGA). These systems' structural stability and electronic characteristics reveal that supported clusters offer superior hydrogen storage capabilities compared to their unassisted counterparts. Various parameters, including cluster-adsorption energy (Eads), hydrogen-adsorption energy in supported clusters (Eads-H), HOMO-LUMO gap, vertical ionization potential (VIP), vertical electron affinity (VEA), chemical potential (μ), and chemical hardness (ɳ) are computed. Substrate support notably enhances the thermodynamic stability and chemical reactivity of the TiMg5 cluster when contrasted with the bare TiMg5 cluster. Furthermore, a remarkable increase in the gravimetric hydrogen storage density, from 1.63 wt% for bare Mg5 clusters to 3.45 wt% for bare TiMg5 clusters, reaching 5.62 wt% in the supported TiMg5 cluster system is observed. These findings indicate the substrate-supported TiMg5 cluster as a promising candidate for hydrogen storage applications.

Construction of multilayered small intestine-like tissue by reproducing interstitial flow.

Recent advances have made modeling human small intestines invitro possible, but it remains a challenge to recapitulate fully their structural and functional characteristics. We suspected interstitial flow within the intestine, powered by circulating blood plasma during embryonic organogenesis, to be a vital factor. We aimed to construct an invivo-like multilayered small intestinal tissue by incorporating interstitial flow into the system and, in turn, developed the micro-small intestine system by differentiating definitive endoderm and mesoderm cells from human pluripotent stem cells simultaneously on a microfluidic device capable of replicating interstitial flow. This approach enhanced cell maturation and led to the development of a three-dimensional small intestine-like tissue with villi-like epithelium and an aligned mesenchymal layer. Our micro-small intestine system not only overcomes the limitations of conventional intestine models but also offers a unique opportunity to gain insights into the detailed mechanisms underlying intestinal tissue development.

Experimental study on mechanical responses of 3D needle‐punched composite preforms at different needling densities: Failure structures, tensile and interlayer peeling strengths

AbstractIn this study, needle‐punched quartz fiber felt / fabrics preforms (NQFFPs) with a wide needling densities (NDs) range from 70 to 280 punches/cm2 were manufactured, then the inner correlation among the NDs, mechanical properties and structural failure modes were studied and revealed. Firstly, the effects of NDs on mechanical strengths, which included tensile and interlayer peeling strengths of NQFFPs, were analyzed through experimental methods. Moreover, MATLAB software was applied to fit the NDs‐mechanical strength curves, then best fitting equations were defined to characterize the change rules between NDs and mechanical strengths. Additionally, with NDs increment, tensile strengths decreased from 0.727 to 0.0925 MPa, whereas interlayer peeling strengths increased from 83.46 to 135.04 N/m. Afterwards, the 3D image technology was utilized to capture failure morphologies of NQFFPs at different NDs from tensile and interlayer peeling experiments, which furtherly revealed the failure mechanisms of NQFFPs at different NDs. This work is significant for the engineering manufacturing and application of needle‐punched preforms and the composites.Highlights Failure structure characteristics of NQFFPs at different NDs were captured. Change rules between NDs and strengths were characterized by math equations. The correlation among NDs, fracture morphologies and strengths was revealed.

Effects of wet-dry alternation on organic phosphorus dynamics and sediment characteristics in the intertidal zone of Nansi Lake

The study of the fractions and distribution characteristics of organic phosphorus in the sediment of the water level fluctuating zone of Nansi Lake is conducive to revealing the transformation of phosphorus in the lake, and has important scientific significance for controlling the eutrophication of Nansi Lake. Based on the sediment of the water level fluctuation zone of Nansi Lake. The improved Hedley continuous grading extraction, ultraviolet-visible spectroscopy and three-dimensional fluorescence spectroscope were used to characterize the structural characteristics and stability of organic molecules in the sediment, and to reflect the differences in the structure and stability of organophosphate in the water level fluctuating zone. Principal component analysis (PCA), Redundancy analysis (RDA) and correlation heat map analysis were used to analyze the correlation between phosphorus and physicochemical index. The results showed that the alternation between wet-dry conditions was more favorable for the release of phosphorus from sediment, compared to continuous inundation conditions. Moreover, the higher the frequency of wet-dry alternations, the greater the release of phosphorus in different forms from the sediment. Wet-dry alternation resulted in a reduction of substituent on the aromatic rings of sediment DOM (dissolved organic matter), and the continuous drying would increase the molecular weight and humidification degree of DOM in the sediment. Correlation analysis showed that NaOH-Po content in sediment was significantly negatively correlated with TP, IP, OP and various organophosphorus forms, indicating a close transformation relationship between phosphorus forms in sediment. The results can provide a scientific basis for controlling the release of endogenous phosphorus and the risk of eutrophication in Nansi Lake.

Assembly and comparative analysis of the complete mitochondrial and chloroplast genome of Cyperus stoloniferus (Cyperaceae), a coastal plant possessing saline-alkali tolerance

BackgroundCyperus stoloniferus is an important species in coastal ecosystems and possesses economic and ecological value. To elucidate the structural characteristics, variation, and evolution of the organelle genome of C. stoloniferus, we sequenced, assembled, and compared its mitochondrial and chloroplast genomes.ResultsWe assembled the mitochondrial and chloroplast genomes of C. stoloniferus. The total length of the mitochondrial genome (mtDNA) was 927,413 bp, with a GC content of 40.59%. It consists of two circular DNAs, including 37 protein-coding genes (PCGs), 22 tRNAs, and five rRNAs. The length of the chloroplast genome (cpDNA) was 186,204 bp, containing 93 PCGs, 40 tRNAs, and 8 rRNAs. The mtDNA and cpDNA contained 81 and 129 tandem repeats, respectively, and 346 and 1,170 dispersed repeats, respectively, both of which have 270 simple sequence repeats. The third high-frequency codon (RSCU > 1) in the organellar genome tended to end at A or U, whereas the low-frequency codon (RSCU < 1) tended to end at G or C. The RNA editing sites of the PCGs were relatively few, with only 9 and 23 sites in the mtDNA and cpDNA, respectively. A total of 28 mitochondrial plastid DNAs (MTPTs) in the mtDNA were derived from cpDNA, including three complete trnT-GGU, trnH-GUG, and trnS-GCU. Phylogeny and collinearity indicated that the relationship between C. stoloniferus and C. rotundus are closest. The mitochondrial rns gene exhibited the greatest nucleotide variability, whereas the chloroplast gene with the greatest nucleotide variability was infA. Most PCGs in the organellar genome are negatively selected and highly evolutionarily conserved. Only six mitochondrial genes and two chloroplast genes exhibited Ka/Ks > 1; in particular, atp9, atp6, and rps7 may have undergone potential positive selection.ConclusionWe assembled and validated the mtDNA of C. stoloniferus, which contains a 15,034 bp reverse complementary sequence. The organelle genome sequence of C. stoloniferus provides valuable genomic resources for species identification, evolution, and comparative genomic research in Cyperaceae.

Nanobody peptide conjugate: a novel CD163 based broad neutralizing strategy against porcine reproductive and respiratory syndrome virus

BackgroundPorcine reproductive and respiratory syndrome virus (PRRSV) is a prevalent swine pathogen, which has caused adverse impact on the global swine industry for almost 30 years. However, due to the immune suppression caused by the virus and the genetic diversity in PRRSV, no virus-targeting broad neutralizing strategy has been successfully developed yet. Antiviral peptide and nanobody have attracted extensive attention with the ease in production and the efficacy in practice. In this study, four new fusion proteins named nanobody peptide conjugates (NPCs) were developed by combining PRRSV specific non-neutralizing nanobodies with CD163-derived peptides targeting the receptor binding domain (RBD) of PRRSV proteins.ResultsFour NPCs were successfully constructed using two nanobodies against PRRSV N and nsp9 individually, recombining with two antiviral peptides 4H7 or 8H2 from porcine CD163 respectively. All four NPCs demonstrated specific capability of binding to PRRSV and broad inhibitory effect against various lineages of PRRSV in a dose-dependent manner. NPCs interfere with the binding of the RBD of PRRSV proteins to CD163 in the PRRSV pre-attachment stage by CD163 epitope peptides in the assistance of Nb components. NPCs also suppress viral replication during the stage of post-attachment, and the inhibitory effects depend on the antiviral functions of Nb parts in NPCs, including the interference in long viral RNA synthesis, NF-κB and IFN-β activation. Moreover, an interaction was predicted between aa K31 and T32 sites of neutralizing domain 4H7 of NPC-N/nsp9-4H7 and the motif 171NLRLTG176 of PRRSV GP2a. The motif 28SSS30 of neutralizing domain 8H2 of NPC-N/nsp9-8H2 could also form hydrogens to bind with the motif 152NAFLP156 of PRRSV GP3. The study provides valuable insights into the structural characteristics and potential functional implications of the RBD of PRRSV proteins. Finally, as indicated in a mouse model, NPC intranasally inoculated in vivo for 12–24 h sustains the significant neutralizing activity against PRRSV. These findings inspire the potential of NPC as a preventive measure to reduce the transmission risk in the host population against respiratory infectious agents like PRRSV.ConclusionThe aim of the current study was to develop a peptide based bioactive compound to neutralize various PRRSV strains. The new antiviral NPC (nanobody peptide conjugate) consists of a specific nanobody targeting the viral protein and a neutralizing CD163 epitope peptide for virus blocking and provides significant antiviral activity. The study will greatly promote the antiviral drug R&D against PRRSV and enlighten a new strategy against other viral diseases.Graphical abstract image

The Effect of Fibrillation, Semi-Dry Pressing, and Surface Treatment on the Barrier Properties of Water Molecules and Oxygen on Food Packaging Paper.

The characteristics of fiber morphology and paper structure are critical to the barrier properties of food packaging paper. Herein, this study aimed to use pulp fibrillation, paper semi-dry pressing and carboxymethyl starch (CMS) coating to flatten the fibers, which were formed on the paper surface with good barrier properties due to the tight bond between fibers. The results showed that the permeability of paper was reduced by 87.56%, from 81.44 μm/Pa·s to 10.13 μm/Pa·s after the pulp fibrillation treatment (60 °SR). Moreover, semi-dry pressing treatment contributed to decreasing the water vapor transmission coefficient (WVP) by 50.98% to 2.74 × 10-10 g/m·s·Pa, and the oxygen permeation coefficient (OP) decreased by 98.04% to 1.93 × 10-14 cm3·cm/cm2·s·Pa. After coating the paper surface with titanium dioxide (TiO2) and CMS, the WVP of the paper was further reduced to 1.55 × 10-10 g/m·s·Pa, and OP was reduced to 0.19 × 10-14 cm3·cm/cm2·s·Pa. These values were 72.27% and 99.8% lower than those of the original paper, respectively. Therefore, through pulp fibrillation, semi-dry pressing of paper, TiO2 filling, and surface coating with CMS, there is no need to use synthetic polymer surface film-forming agents to achieve the high barrier properties that are required for low water and oxygen molecules permeation in food packaging paper.

Novel ground state structures of N-doped LuH3.

Ab-initio crystal structure searches have played a pivotal role in recent discovery of high-Tc hydride superconductors under high pressure. Using evolutionary crystal searches, we predict novel ground state structures of N-doped LuH3 at ambient conditions. We find an insulating ground state structure for LuN0.125H2.875 (~1.0 wt.% N), contrary to earlier studies where assumed structures were all metallic. This insulating behavior of ground state was found to persist up to ~45 GPa. However our crystal structure search revealed a metallic state for an H-deficient variant of LuN0.125H2.875. We study bonding characteristics of important structures by calculating electronic density of states, electronic-localization functions and Bader charges. Our Bader charge analysis shows that insulators have both H+ and H- ions whereas metals have only H- ions. We find that H+ ions are bonded to N atoms via a very short covalent bond. Thus we identify a clear relationship between formation of N-H bonds and insulating behavior of materials. Besides this, we perform crystal structure searches for three more compositions with higher N-content (> 1.0 wt.%). Analysis of electronic properties shows that the ground states of these compositions are insulator.

2D/2D Heterojunctions of Layered TiO2 and (NH4)2V3O8 for Sunlight-Driven Methylene Blue Degradation

Photocatalysis based on titanium dioxide (TiO2) has become a promising method to remediate industrial and municipal effluents in an environmentally friendly manner. However, the efficiency of TiO2 is hampered by problems such as rapid electron–hole recombination and limited solar spectrum absorption. Furthermore, the sensitization of TiO2 through heterojunctions with other materials has gained attention. Vanadium, specifically in the form of ammonium vanadate ((NH4)2V3O8), has shown promise as a photocatalyst due to its ability to effectively absorb visible light. However, its use in photocatalysis remains limited. Herein, we present a novel synthesis method to produce lamellar (NH4)2V3O8 as a sensitizer in a supramolecular hybrid photocatalyst of TiO2–stearic acid (SA), contributing to a deeper understanding of its structural and magnetic characteristics, expanding the range of visible light absorption, and improving the efficiency of photogenerated electron–hole separation. Materials, such as TiO2–SA and (NH4)2V3O8, were synthesized and characterized. EPR studies of (NH4)2V3O8 demonstrated their orientation-dependent magnetic properties and, from measurements of the angular variation of g-values, suggest that the VO2+ complexes are in axially distorted octahedral sites. The photocatalytic results indicate that the 2D/2D heterojunction layered TiO2/vanadate at a ratio (1:0.050) removed 100% of the methylene blue, used as a model contaminant in this study. The study of the degradation mechanism of methylene blue emphasizes the role of reactive species such as hydroxyl radicals (•OH) and superoxide ions (O2•−). These species are crucial for breaking down contaminant molecules, leading to their degradation. The band alignment between ammonium vanadate ((NH4)2V3O8) and TiO2–SA, shows effective separation and charge transfer processes at their interface. Furthermore, the study confirms the chemical stability and recyclability of the TiO2–SA/(NH4)2V3O8 photocatalyst, demonstrated that it could be used for multiple photocatalytic cycles without a significant loss of activity. This stability, combined with its ability to degrade organic pollutants under solar irradiation, means that the TiO2–SA/(NH4)2V3O8 photocatalyst is a promising candidate for practical environmental remediation applications.

Ontological model of structure and parameters of components in high-tech product modernization projects

The subject of the article is models representing the structure and parameters of components in high-tech products based on the analysis of technical documentation in modernization projects. The purpose of the proposed research is to enhance the quality of modernization processes of high-tech products by forming an ontological model of the product with innovative components, considering the diversity of information support. The article addresses the following tasks: studying the main methods and technologies of system representation of complex product structure; forming a model of structural-functional decomposition of a high-tech product, creating an ontological model of the structure and parameters of a high-tech product based on technical documentation. The following methods are applied: systemic approach, methods of functional-structural decomposition, set theory, ontology construction methods, semantic models. The following results were obtained: The main methods of system representation of complex product structure were investigated, based on the following principles: decomposition of complex product architecture, layering of complex product representation, multivariate synthesis of component architecture. The main directions and advantages of using 3D technologies for solving design tasks in modernization projects of high-tech product components are considered. The decomposition of a high-tech product into component parts and partial parameters is proposed, taking into account functional, structural, and parametric characteristics. An ontological model of the structure and parameters of a high-tech product is formed based on a set of technical documentation and considering additional heterogeneous sources of information. Innovative elements are identified, the description of which may be fuzzy. Conclusions. The proposed ontological model can serve as a basis for finding similar solutions regarding the design of innovative components in the precedent database, which is properly structured. In the absence of similar design solutions, innovative component design can be carried out using 3D technologies based on supplementing fuzzy information in the semantic model.