Structural Order Research Articles

On a Symmetry-Based Structural Deterministic Fractal Fractional Order Mathematical Model to Investigate Conjunctivitis Adenovirus Disease

In the last few years, the conjunctivitis adenovirus disease has been investigated by using the concept of mathematical models. Hence, researchers have presented some mathematical models of the mentioned disease by using classical and fractional order derivatives. A complementary method involves analyzing the system of fractal fractional order equations by considering the set of symmetries of its solutions. By characterizing structures that relate to the fundamental dynamics of biological systems, symmetries offer a potent notion for the creation of mechanistic models. This study investigates a novel mathematical model for conjunctivitis adenovirus disease. Conjunctivitis is an infection in the eye that is caused by adenovirus, also known as pink eye disease. Adenovirus is a common virus that affects the eye’s mucosa. Infectious conjunctivitis is most common eye disease on the planet, impacting individuals across all age groups and demographics. We have formulated a model to investigate the transmission of the aforesaid disease and the impact of vaccination on its dynamics. Also, using mathematical analysis, the percentage of a population which needs vaccination to prevent the spreading of the mentioned disease can be investigated. Fractal fractional derivatives have been widely used in the last few years to study different infectious disease models. Hence, being inspired by the importance of fractal fractional theory to investigate the mentioned human eye-related disease, we derived some adequate results for the above model, including equilibrium points, reproductive number, and sensitivity analysis. Furthermore, by utilizing fixed point theory and numerical techniques, adequate requirements were established for the existence theory, Ulam–Hyers stability, and approximate solutions. We used nonlinear functional analysis and fixed point theory for the qualitative theory. We have graphically simulated the outcomes for several fractal fractional order levels using the numerical method.

Higher Order Structure Differences Among Insulin Crystalline Drugs Revealed by 2D heteronuclear NMR.

During therapeutic protein development, two-dimensional (2D) heteronuclear NMR spectra can be a powerful analytical method for measuring protein higher order structure (HOS) in solution since the spectra exhibit much higher resolution than homonuclear 1H spectra. However, 2D NMR capabilities for characterizing protein HOS in crystalline states remain to be assessed, given the low 13C natural abundance and intrinsically broader lines in solid-state NMR (SSNMR). Herein, high-resolution heteronuclear correlation (HETCOR) SSNMR was utilized to directly measure intact crystal drug products of insulin human, insulin analogs of insulin lispro and insulin aspart. The fingerprint regions in 2D 1H-13C HETCOR spectra were identified, which distinguished the insulin crystals in their primary structure, HOS heterogeneity and dynamics, as well as the manufacturing processes. The HOS heterogeneity in insulin analogs is consistent with their therapeutic effect of rapid action; while insulin human crystals showed more structural homogeneity, consistent with their slower pharmacokinetics (PK)peak time than insulin analogs. Therefore, heteronuclear NMR could be broadly applicable to study protein drug dosage forms from liquid to solid, yielding improved molecular level structure data for assessing drug HOS in biosimilar drug development.

The Performance of PEFC with Marimo-like Carbon Considering Relative Humidity

A proton exchange membrane fuel cell (PEMFC) is powered by humidified fuel and air gases supplied to the cells. We evaluated the effect of the relative humidity (RH) of the fuel and air gases on the I-V performance of the Marimo-like carbon (MC). MC is a higher order structure of carbon fibers. The RH increased the proton conductivity of the Nafion, while excessive humidification caused flooding. The highest maximum power density was 303 mW cm-2 (80% RH) for the Pt/MC and 165 mW cm-2 (60% RH) for the Pt/CB (carbon black). At all the RHs, the maximum power density of the Pt/MC was higher than that of the Pt/CB. The fiber structure and I/C (0.1) of the MC increase the mass diffusivity of the Pt/MC. The high mass diffusivity of the Pt/MC found to reduce flooding and promote the wetting of the Nafion by the generated water.

The Effects of Contact By the Catalyst Layer and the Gas Diffusion Layer Interface on the Performance of a PEFC with Marimo-like Carbon

When assembling a proton exchange membrane fuel cell (PEMFC), a clamping pressure is applied to all the components. The catalyst layer (CL) and gas diffusion layer (GDL) are compressed to the gasket thickness by the clamping during assembly. This compression increases the conductivity of the protons and electrons while reduces the size of the pores, which are the removal channels for the generated water and the diffusion channels for the fuel and air gases. We evaluated the effect of the CL compression prepared with the Marimo-like carbon (MC) regarding the I-V performance. The MC is a higher order structure of carbon fibers. The maximum power density was the highest (237 mW cm-2) at the 22% compression ratio. The excessive compression was suggested to have a higher effect on blocking the diffusion channels of the fuel and air gases than on improving the conductivity.

Influence of the Molecular Weight of the Polycarbonate Polyol on the Intrinsic Self-Healing at 20 °C of Polyurethanes.

Different polyurethanes (PUs) were synthesized with polycarbonate polyols of molecular weights of 500, 1000, and 2000 Da. Their self-healing abilities at 20 °C were tested, and their structural, thermal, and mechanical properties were analyzed. The PUs made with polycarbonates of molecular weights 500 (YC500) and 1000 Da (YC1000) exhibited self-healing at 20 °C, and the self-healing time of YC1000 was the shortest. The absence of crystallinity and the low degree of micro-phase separation favored self-healing at 20 °C in YC500. However, the presence of tack and the existence of allophanate species and urethane-carbonate and urea-carbonate hydrogen bonds disfavored self-healing. Consequently, the self-healing time at 20 °C of YC500 was longer than expected. On the other hand, YC1000 exhibited an "equilibrium" between urethane-carbonate and urea-carbonate hydrogen bonds and carbonate-carbonate interactions among the soft segments, so a particular structural order was produced that was associated with its fastest self-healing at 20 °C. The PU made with the polycarbonate of molecular weight 2000 Da did not exhibit self-healing at 20 °C because of its significant micro-phase separation, the presence of semi-crystalline soft domains, and the lower density of hydrogen bonds.

Low rigidity despite high asphaltene content in bitumen: The role of resins

This research presents a laboratory study on three different bitumens, chosen as representative, coming from three different oils with different origins (Saudi Arabia, Venezuela, Russia) for assessing their structural differences due their different origins. The three bitumens have penetration indexes of 160/220, 70/100, 70/100 respectively, whereas their S.A.R.A. compositions showed marked differences particularly in the asphaltene and resin content, being the bitumen from Saudi Arabia particularly rich in such fractions, and that from Venezuela possessing the lower content of these. Rheological characterization carried out as a function of frequency and temperature suggests that: (i) the modulus at an angular frequency of 1 rad/s takes the lowest value for sample from Saudi Arabia, in accordance with the penetration index trend of the samples (ii) from a microscopic point of view, the average number of first neighbors involved in the flowing process is around one. Further analysis involved the extraction of the asphaltenic fraction according to the standard ASTM D4124 procedure: the melting point of the asphaltene fraction is 175 and 195 °C for the samples from Venezuela and Russia, respectively, while it can hardly be detected for the sample from Saudi Arabia. This anomalous behavior has been interpreted with the aid of X-Ray scattering data, which highlighted a lower order in asphaltene assembly at higher level of aggregation, which means that asphaltene molecules are arranged to form local assemblies with structural well-defined order only at short range, being higher levels of aggregations more disordered. All the data self-consistently show that the bitumen from Saudi Arabia, thanks to a higher content of resins, can stabilize more efficiently aphaltenes and therefore the latter can form ordered stacks only ad short range (only few Angstroms), leaving a more amorphous structure at longer ranges with consequently higher penetration index and lower modulus.

Thermally processed rice starch impacts glucose homeostasis in mice to different degrees via disturbing gut microbial structure and intestinal barrier function

Long-term intake of thermally processed starch-based foods may impact glucose homeostasis, but the consistency of the effects of various thermal treatments and the reasons are not clear. In this study, thermal treatments, especially boiling, damaged the crystal structure and inter-molecular hydrogen bonds of starch-based blends, thus decreasing the structural order and stability. These thermally treated starch-based blends increased the appetite of mice, promoted food digestion, and enhanced postprandial glucose response. Normal C57BL/6J mice were treated with boiled, baked, and fried starch-based diets for ten weeks. Compared to the baked and fried starch-based diets, the boiled starch-based diet significantly (p < 0.05) elevated random blood glucose levels and disrupted insulin homeostasis, primarily due to the remarkable decrease in gut microbial diversity. Both baked and fried starch-based diets resulted in relatively high intestinal epithelial permeability (plasma lipopolysaccharide increased by 28.67 % and 21.85 %, respectively). They adversely affected islet β-cell function and evoked glucose metabolism disorder. Overall, results demonstrate a clear connection among the thermal processing of starch-based diets, disruption of intestinal homeostasis, and adverse glucose metabolism. This study lays a theoretical foundation for the formulation of food processing strategies to mitigate the adverse effects of thermally treated food on glucose homeostasis.

The impact of mechanical strain on magnetic and structural properties of 2D materials: A Monte Carlo study.

The inherent flexibility of two-dimensional (2D) materials allows for efficient manipulation of their physical properties through strain application, which is essential for the development of advanced nanoscale devices. This study aimed to understand the impact of mechanical strain on the magnetic properties of two-dimensional (2D) materials using Monte Carlo simulations. The effects of several strain states on the magnetic properties were investigated using the Lennard-Jones potential and bond length-dependent exchange interactions. The key parameters analyzed include the Lindemann coefficient, radial distribution function, and magnetization in relation to temperature and magnetic field. The results indicate that applying biaxial tensile strain generally reduces the critical temperature (Tc). In contrast, the biaxial compressive strain increased Tc within the elastic range, but decreased at higher strain levels. Both compressive and tensile strains significantly influence the ferromagnetic properties and structural ordering, as evidenced by magnetization hysteresis. Notably, pure shear strain did not induce disorder, leaving the magnetization unaffected. In addition, our findings suggest the potential of domain-formation mechanisms. This study provides comprehensive insights into the influence of mechanical strain on the magnetic behavior and structural integrity of 2D materials, offering valuable guidance for future research and advanced material design applications.

Modelling and Validating the Nonthermal Plasma Parameters for Producing Liquid Hydrocarbon from Solid Polyolefin Wastes

This study solved a set of equations to verify the dynamic optimal conditions of nonthermal plasma (NTP)-chemical conversion of solid polyolefin wastes into liquid petroleum hydrocarbons. Furthermore, a novel optimisation model was validated with non-linear experimental conditions to assess the quantitative relationship between the process variables responsible for the degradation rate of wastes. The central composite design (CCD) experimental design was developed based on the Response Surface Model (RSM) technique. These techniques significantly improved the model predictions because of the more-detailed electrochemical description. Experiments were conducted in an in-house-designed and -developed NTP system with advanced data acquisition schemes. Both experimental and the numerical findings exhibited a good agreement, and the results indicated that the electrical factors of NTP could significantly affect the conversion yield (Yconv%) of solid polyolefin-derived wastes to liquid hydrocarbons. Additionally, the model investigation indicated that factors such as power discharge (x1), voltage intensity (x2), and reaction retention time (RTT) (x3) significantly influenced the conversion yield. After optimisation, a maximum conversion percentage (Yconv%) of ≈93% was achieved. The findings indicated that this recommended framework could be effectively employed for scaling the plasma synergistic pyrolysis technique for generating the maximal Yconv% of plastic wastes to yield an oil. Thereafter, the analysis of variance (ANOVA) technique was applied to examine the accuracy of the developed structure in order to upgrade this laboratory-scale processes to an industrial-scale process with &gt;95% effectiveness. The calorific value of the produced oil was seen to be from 43,570.5 J/g to 46,025.5 J/g due to changes of the arrangements of the process factors, which specified that the liquid hydrocarbons showed similar characteristics like commercial diesel in this respect.

Ferromagnetic-Antiferromagnetic Coupling in Gas-Phase Synthesized M(Fe, Co, and Ni)-Cr Nanoparticles for Next-Generation Magnetic Applications.

Combining ferromagnetic-antiferromagnetic materials in nanoalloys (i.e., nanoparticles, NPs, containing more than one element) can create a diverse landscape of potential electronic structures. As a result, a number of their magnetic properties can be manipulated, such as the exchange bias between NP core and shell, the Curie temperature of nanoparticulated samples, or their magnetocaloric effect. In this work, such a family of materials (namely M-Cr NPs where M is Fe, Co, Ni, or some combination of them) is reviewed with respect to the tunability of their magnetic properties via optimized doping with Cr up to its solubility limit. To this end, gas-phase synthesis has proven a most effective method, allowing excellent control over the physical structure, composition, and chemical ordering of fabricated NPs by appropriately selecting various deposition parameters. Recent advances in this field (both experimental and computational) are distilled to provide a better understanding of the underlying physical laws and point toward new directions for cutting-edge technological applications. For each property, a relevant potential application is associated, such as memory cells and recording heads, induced hyperthermia treatment, and magnetic cooling, respectively, aspiring to help connect the output of fundamental and applied research with current real-world challenges.

Enhanced oxygen evolution and power density of Co/Zn@NC@MWCNTs for the application of zinc-air batteries

Rechargeable zinc-air batteries (ZABs) are viewed as a promising solution for electric vehicles due to their potential to provide a clean, cost-effective, and sustainable energy storage system for the next generation. Nevertheless, sluggish kinetics of the oxygen evolution reaction (OER), the oxygen reduction reaction (ORR) at the air electrode, and low power density are significant challenges that hinder the practical application of ZABs. The key to resolving the development of ZABs is developing an affordable, efficient, and stable catalyst with bifunctional catalytic. In this study, we present a series of bifunctional catalysts composed of Co/Zn nanoparticles uniformly embedded in nitrogen-doped carbon (NC) and multi-walled carbon nanotubes (MWCNTs) denoted as Co/Zn@NC@MWCNTs. The incorporation of MWCNTs using a facile and non-toxic method significantly decreased the overpotential of the OER from 570 to 430 mV at 10 mA cm−2 and the peak power density from 226 to 263 mW cm−2. Besides, the electrochemical surface area measurements and electrochemical impedance spectroscopy indicate that the three-dimensional (3D) network structure of MWCNTs facilitates mass transport for ORR and reduces electron transfer resistance during OER, leading to a small potential gap of 0.86 V between OER and ORR, high electron transfer number (3.92–3.98) of the ORR, and lowest Tafel slope (47.8 mV dec−1) of the OER in aqueous ZABs. In addition, in-situ Raman spectroscopy revealed a notable decrease in the ID/IG ratio for the optimally configured Co/Zn@NC@MWCNTs (75:25), indicating a reduction in defect density and improved structural ordering during the electrochemical process, which directly contributes to enhanced ORR activity. Hence, this study provides an excellent strategy for constructing a bifunctional catalyst material with a 3D MWCNTs conductive network for the development of advanced ZAB systems for sustainable energy applications.

Interrogation of three-finger toxin and phospholipase A2 higher order structures from the forest cobra (Naja melanoleuca) venom using a mass spectrometric approach

Snake venoms are composed of bioactive proteins and peptides from various toxin families and elicit potent pharmacological activity. There is great interest in characterising these venom proteins for the development of effective antivenom treatment as well as utilisation for biomedical and therapeutic applications. However, a thorough structural understanding of the snake venom proteins is necessary. Higher-order protein complexes are known to form in snake venoms and lend structural and functional diversity, often eliciting greater activity than the sum of monomeric protein species. Despite the significance, the nature of these protein complexes is extremely underexplored. In this study, we demonstrate the use of mass spectrometry (MS)-based strategies to explore the toxins at a quaternary level in the venom from the medically significant forest cobra (Naja melanoleuca). Small toxins, mainly three finger toxins (3FTxs) and phospholipase A2s (PLA2s), were identified by comparison of intact and chemically reduced masses using matrix-assisted laser desorption ionisation (MALDI-MS) profiling. Notably, interrogation of these small toxins by native MS and collision-induced dissociation revealed the presence of various non-covalent 3FTx and PLA2 dimers, providing insight on the higher-order protein structures for a variety of N. melanoleuca toxins using a MS-based approach. Furthermore, phospholipid substrate specificity of N. melanoleuca PLA2 enzymes were explored, capturing the indiscriminate activity of these PLA2s towards a range of phospholipid classes for the first time.

Rhetorical Structures of Abstracts Written for TESOL International Conferences

Introduction: The current research aimed to investigate rhetorical move structures in abstracts written for TESOL international conferences by non-native speakers of English. Methodology: Sixty abstracts were collected from Vietnamese and Thai proceedings published by three universities. These abstracts were written for the TESOL conventions in the period 2018-2019. The study used the five-move scheme (I-P-M-R-D) adapted from Pho’s (2008) framework for move analysis with the assistance of the automatic text analysis and move occurrences soft wares AntMover and AntConc. Results: Results from the study showed that Methodology, Result, and Purpose sections played vital parts in abstract writing while Introduction and Discussion seized small portions in the corpus. While writing abstracts for TESOL conventions, the Method section is frequently repeated or embedded in the 60 target abstracts of the present study. The present study also indicated that the authors writing papers for TESOL conferences did not strictly follow the five-move sequence as expected due to word limitation and face-to-face mode of paper presentations at conventions. Non-linear move patterns were also recognized that are aligned with the findings of previous research studies. Conclusion: The findings of this study revealed that the abstracts written for TESOL international conferences in this research have followed the P-M-R order of an abstract rhetorical structure. This study's findings on rhetorical structures could be of great assistance in helping novice writers in composing well-structured abstracts for TESOL conferences.

IL CORPO VIVO DELLA LINGUA: ALCUNE CONSIDERAZIONI PRATICO-TEORICHE SULLE LINGUE «SPARGĂ» E «LEOPARDĂ» DI NINA CASSIAN E VIRGIL TEODORESCU

This contribution, starting from the studies of Giorgio Agamben, aims to highlight the peculiarity of two poetic languages invented by Nina Cassian and Virgil Teodorescu: the “spargă” language and the “leopardă” languages. The “spargă” and “leopardă” languages, developed during the surrealist period in Bucharest, embody the intrinsic dynamism of language. On the one hand, they reflect the multiplicity and original complexity of poetic language, where meanings are manifold and semantic closure is not definitive. On the other hand, these two fantastic languages highlight the pulsional heterogeneity underlying culture itself, suggesting that the truth of things does not directly coincide with what is explicitly said, but rather requires an act of translation and interpretation by the subject. Moreover, these two experimental idiolects can also be interpreted as poetic explorations that challenge the normative structures of the symbolic order, introducing elements of the semiotic that materially express the unconscious in art. The connection with Lacan’s “lalangue” is evident in their common focus on the pre-linguistic and affective dimensions of language, which transcend the limitations of ordinary communication.

Regulating the structure and gelling properties of maize starch by non-thermal effect of low intensity radio frequency wave

To verify whether there is a non-thermal effect in the radio frequency (RF) treatment process, it's very important for effectively excluding the thermal effect. Native maize starch (MS) slurry was treated under a specific electric field intensity while maintaining the sample temperature at 25 ± 2 °C for different times (1, 2, 4 and 8 h), which would effectively eliminate the influence of thermal effect on starch. A corresponding low electric field intensity of 3.3–3.4 kV/m was established after adjusting the electrode gap to be 220 mm of the 27.12 MHz RF system. Samples treated without RF-wave for the same time (1, 2, 4 and 8 h) were used as controls. The differences between the effect of these two treatments on the multi-scale structural and gelling properties of starch samples were investigated. Results showed that the low intensity RF-wave treatment enhanced the short-range structural order. A higher degree of order value and the double helical structure were observed from Fourier transform infrared (FTIR) spectra and solid state 13C nuclear magnetic resonance (13C NMR). Moreover, compared to control MS, the crystallinity of low intensity RF-treated starch significantly increased though the crystal pattern remained unchanged. Low intensity RF-wave treated starch had no significant difference in loss modulus, energy and distance of inter-double helices hydrogen bond, and pasting properties (i.e. TV, SB and BD) when compared with control sample. The effect of low intensity RF wave on starch without heating was insufficient to cause macroscopic property changes. These results provide valuable insights into the structural changes of starch treated by low intensity RF-wave and verify that the non-thermal effect of RF waves may be primarily achieved through the dipole polarization mechanism.

Controllable Design of Polyamide Composite Membrane Separation Layer Structures via Metal-Organic Frameworks: A Review.

Optimizing the structure of the polyamide (PA) layer to improve the separation performance of PA thin-film composite (TFC) membranes has always been a hot topic in the field of membrane preparation. As novel crystalline materials with high porosity, multi-functional groups, and good compatibility with membrane substrate, metal-organic frameworks (MOFs) have been introduced in the past decade for the modification of the PA structure in order to break through the separation trade-off between permeability and selectivity. This review begins by summarizing the recent progress in the control of MOF-based thin-film nanocomposite (TFN) membrane structures. The review also covers different strategies used for preparing TFN membranes. Additionally, it discusses the mechanisms behind how these strategies regulate the structure and properties of PA. Finally, the design of a competent MOF material that is suitable to reach the requirements for the fabrication of TFN membranes is also discussed. The aim of this paper is to provide key insights into the precise control of TFN-PA structures based on MOFs.

The influence of the bounding surface on the structural ordering of short chains of oligoetherimides.

In this study, we have conducted a comparative analysis of the structural ordering of short oligoetherimide chains (dimers) near the bounding surface, depending on the structure of that surface. In order to clarify the possibility of oligoetherimide ordering along the symmetry axes of graphene, two types of bounding surfaces were considered: graphene, with a regular discrete position of interaction centers (carbon atoms), and a smooth, structureless impermeable wall. The chemical structures of the considered dimers consist of two repeating units of BPDA-P3, ODPA-P3, or aBPDA-P3 thermoplastic polyetherimides. Using all-atom molecular dynamics simulations, the process of structural ordering of the dimers near the surface of the graphene or wall was established. The ODPA-P3 and BPDA-P3 dimers form an ordered state near the graphene surface, while the aBPDA-P3 dimers do not demonstrate structural ordering. The simulation results confirmed that the ordering direction of the BPDA-P3 and ODPA-P3 dimers near the graphene surface is chosen randomly. Comparison of the oligoetherimide structure formed near the attracting wall without a symmetrical location of the interaction centers shows the similarity of the ordering of dimers near the graphene surface and the wall. As in the case of the graphene surface, the ordering of oligoetherimide molecules near the structureless wall demonstrates one direction of ordering. Therefore, we confirmed that the key factor for the onset of ordering is the presence of a confining surface, rather than the symmetrical arrangement of interaction centers in the substrate structure.

Modulation of retrogradation properties by removal and retention of starch granule-associated lipids: A case study on buckwheat and wheat starches

The objective of this research was to investigate the influence of starch granule-associated lipids (SGALs) on retrogradation properties of buckwheat and wheat starches. According to the results, the removal of SGALs led to remarkable increase in the retrogradation enthalpy change of all starches and the strength of starch gels, as well as the density and short-range ordered structure of starch aggregates. The strength of starch gel experienced a rise from 3139.39 g to 3718.18 g in Tartary buckwheat, 2924.12 g to 3551.13 g in common buckwheat, and 1887.55 g to 2555.24 g in wheat, respectively. The removal of SGALs contributed to a decrease in the thermal stability of starches and an augmentation of amylose leaching during gelatinization process, which would strengthen the hydrogen bond interaction between starch molecules during cooling process, and promoting the rearrangement of the order structure of starch molecules. In general, these results indicated that the retention of SGALs could limit amylose leaching, then inhibited rearrangement and recrystallization of dissolved starch molecules, and ultimately delayed the short-term and long-term retrogradation process. This work further supplemented theoretical knowledge about SGALs in buckwheat and wheat starches, also provided a new perspective for regulating the physicochemical properties of starches.

Role and tasks of volunteers in the public health institution

In recent years, our country has undergone a radical transformation of its administrative structure in order to adapt to the new and no longer postponable demands for the decentralisation of state powers and competences

The legal foundations and specifics of exercising corporate rights by individuals authorized to perform local self-government

Financial liberalization is a widely adopted policy for countries to enhance growth. Financial liberalization enables financial institutions to proceed with innovative activities by familiarizing themselves with fewer mortgage loans in the financial market. Financial liberalization is a widely adopted policy for countries to enhance growth; however, it is a complex and controversial issue, with different studies providing contrasting perspectives. Financial liberalization is considered an efficient way to measure and change the financial market and structure in order to reach a position to get financial liberalized markets under an efficient and effective guideline. In the case of Vietnam, very few scholars have investigated the issue of financial liberalization-led growth. This endeavor examines the effects of financial liberalization on economic growth in the presence of control variables for Vietnam over the period of 1990 to 2021. This study uses the Autoregressive Distributive Lag Model approach due to its several advantages. The results show that financial liberalization enhances economic growth, which implies that more liberalization results in enhanced growth in Vietnam. Improved access to credit is another positive outcome of financial liberalization, as it can result in greater access to credit for individuals and businesses, enabling them to make investments and expand their operations. Hence, the results support the neo-liberal view of liberalization.