Deflection Of Structure Research Articles

GNSS TECHNOLOGY FOR RESEARCH OF DEFORMATIONS OF HYDROTECHNICAL INSTALLATIONS

Hydro technical installations are subject to a list of temporary and constant factors, such as Natural, Physical, Tectonic, Anthropogenic and other, which lead to their deformation and destruction. Study, exploration and forecast of deformations, can save us big. In this article has been researched the GNSS capability of obtaining the necessary data for building a model and reading or predicting deformations. GNSS has been used for monitoring structural deformation and deflection for more than a 30 years now. Detailed procedures for field data collection, data analysis and visualisation, generation of reliable analytical model, model updating and prediction for structural operational condition are also recommended.

Numerical Simulation of Fixed-Free End Beam’s Modal Behaviour using Two-Way Coupled Fluid-Structure Interaction Approach

The fluid flow velocity stands as a pivotal parameter with a great influence on the mutual interaction between the fluid domain and structure. This paper focuses on structural deformation, structural velocity, von-Mises stress and frequency response of a fixed-free end beam using two-way coupled fluid-structure interaction within ANSYS Workbench. The parameters such as deformed fluid pressure and velocity were analysed across three diverse flow regimes: laminar, transitional and turbulent – each aligned with distinct fluid velocities. The outcomes show that the total deformation, velocity and von-Mises stress distribution of the fixed-free end beam increase as the inlet fluid velocity increases. As a result, the pressure and velocity distribution in the fluid flow which receiving the resultant or leftover structure deflection also increases as the incoming fluid velocity increases. Furthermore, the analysis probes the frequency response in turbulent flow conditions reveals higher values compared to laminar and transitional flows, albeit within the same natural frequency domain. This observation marks significant vibrational characteristics found in the presence of turbulent flow dynamics.

Nonlinear dynamics of wing-like structures using a momentum subspace-based Koiter-Newton reduction

Cantilevers find a wide range of applications in the design of scientific equipment and large-scale engineering structures such as aircraft wings. Analysis techniques based on linearization approximations are unable to capture the large amplitude oscillation behaviour of such structures and thus, necessitates development of dedicated nonlinear methods. In this work, the recent developments in the Koiter-Newton model reduction method are utilized to obtain nonlinear reduced order models (ROMs) from full finite element structural models in order to simulate large amplitude dynamics of cantilevers. The method describes a nonlinear system of governing equations comprising quadratic and cubic terms which are obtained as higher order derivatives of the in-plane strain energy. To ensure that the large rotations in cantilevers and the resultant foreshortening effect is also accounted for, a ROM updating algorithm is adopted where the ROM parameters are varied with the structural deflections. Linear eigenmodes of the structure are utilized to form the reduction subspace. To validate the methodology, the ROM solution is compared against experimental results and a convergence study is conducted to identify the number of modes needed to replicate the nonlinear response. Finally, a composite wingbox structure is considered for which time domain simulations are conducted and frequency response curves, obtained through a frequency sweep, are presented.

Comparative Study of Optimal Flat Double-Layer Space Structures with Diverse Geometries through Genetic Algorithm

This paper investigates the structural performance of flat double-layer grids with various constitutive units, addressing a notable gap in the literature on diverse geometries. Six common types of flat double-layer grids are selected to provide a comprehensive comparison to understand their structural performance. Parametric models are built using Rhino and Grasshopper plugins. Single- and multi-objective optimization processes are conducted on the considered models to evaluate structural mass and maximum deflection. The number of constitutive units, the structural depth, and the cross-section diameter of the members are selected as design variables. The analysis reveals that the semi-octahedron upon square-grid configuration excels in minimizing structural mass and deflection. Furthermore, models lacking a full pyramid form exhibit higher deflections. Sensitivity analyses disclose the critical influence of the design variables, particularly highlighting the sensitivity of structural mass to the number of constitutive units and cross-section diameter. These findings offer valuable insights and practical design considerations for optimizing double-layer grid space structures.

GRNN-based cascade ensemble model for non-destructive damage state identification: small data approach

AbstractAssessing the structural integrity of ageing structures that are affected by climate-induced stressors, challenges traditional engineering methods. The reason is that structural degradation often initiates and advances without any notable warning until visible severe damage or catastrophic failures occur. An example of this, is the conventional inspection methods for prestressed concrete bridges which fail to interpret large permanent deflections because the causes—typically tendon loss—are barely visible or measurable. In many occasions, traditional inspections fail to discern these latent defects and damage, leading to the need for expensive continuous structural health monitoring towards informed assessments to enable appropriate structural interventions. This is a capability gap that has led to fatalities and extensive losses because the operators have very little time to react. This study addresses this gap by proposing a novel machine learning approach to inform a rapid non-destructive assessment of bridge damage states based on measurable structural deflections. First, a comprehensive training dataset is assembled by simulating various plausible bridge damage scenarios associated with different degrees and patterns of tendon losses, the integrity of which is vital for the health of bridge decks. Second, a novel General Regression Neural Network (GRNN)-based cascade ensemble model, tailored for predicting three interdependent output attributes using limited datasets, is developed. The proposed cascade model is optimised by utilising the differential evolution method. Modelling and validation were conducted for a real long-span bridge. The results confirm the efficacy of the proposed model in accurately identifying bridge damage states when compared to existing methods. The model developed demonstrates exceptional prediction accuracy and reliability, underscoring its practical value in non-destructive bridge damage assessment, which can facilitate effective restoration planning.

Numerical model for time-dependent cracking and deflection of large-span concrete bridge structures

A new computational framework is proposed to analyse the simultaneous occurrence of multiple physical processes affecting the long-term behavior of large-scale concrete structures. Relying on the additivity of small strain, the framework comprehensively takes the nonlinearity of concrete creep, cyclic creep induced by traffic load, concrete shrinkage, concrete cracking, normal-strength steel rebars and prestressing strands relaxation into account, and other physical processes are further imagined. The algorithm is implemented with Abaqus/Standard with the aid of several user-supplied subroutines. The implicit time integration scheme is deemed appropriate for large-scale structures. The framework is systematically validated by several classical experimental results. Finally, a three-dimensional study of a three-span continuous rigid frame bridge with 270 m main span is performed. Comparison between the experimental and numerical results further reveals the contributions of various potential influencing factors. The proposed model shows promise for predicting the time-dependent performance of large-scale reinforcement concrete (RC) structures.

Wave energy converter with multiple degrees of freedom for sustainable repurposing of decommissioned offshore platforms: An experimental study

Targeting at the sustainable repurposing of decommissioned offshore platforms, a novel wave energy converter with a distinct mechanical-motion-rectifier power take-off system is developed to provide renewable energy. A scaled prototype is constructed and experimentally investigated in a large wave tank, as an essential step before sea trials. A new phenomenon of parametric oscillation is observed and explored, as physical evidence of chaotic instabilities of wave energy devices. Several advantages of the multi-degree-of-freedom device over its single-degree-of-freedom counterpart are disclosed physically for the first time. Releasing the pitch and roll degrees of freedom helps enlarge the heave amplitude of the energy-absorbing buoy, receive a larger hydrodynamic force from water waves to the power take-off system, reduce structural deflection and friction of the transmission machinery, and eliminate spiky and noisy vibrations of the internal force. Accordingly, the maximum efficiencies in the energy absorption and transmission stages increase from 45% and 11% to 90% and 30%, respectively; the overall efficiency of energy conversion is increased by up to three times in a broad spectrum of wave conditions.

High-fidelity fluid-structure interaction applied to static aeroelasticity in transonic flows

Transonic flows at high Reynolds numbers can lead to high dynamic pressures and, consequently, to aerostructural deflections of aircraft structures. This study aims to develop and validate a high-fidelity static aeroelastic analysis environment that is efficient and that can be used in an industrial setting. The aerodynamics is represented by numerical solutions of the Reynolds-averaged Navier-Stokes equations with appropriate turbulence closures. The load transfer process uses finite element shape functions in order to distribute the aerodynamic loads into the structural discretization. The structural analysis employs a modal basis approach, and a wingtip deflection convergence study is performed to find an adequate modal basis size. Radial basis functions are used for the fluid mesh displacement, and the influence of the support radius is evaluated to determine the optimal values relative to the wing mean aerodynamic chord. The capability is tested using the static aeroelastic benchmarks of the High Reynolds Aerostructural Dynamics Project (HIRENASD) and NASA's Common Research Model (CRM). The static aeroelastic results demonstrate robustness and consistency for the aerodynamic coefficients, pressure distributions, and structural deflection predictions at different normalized dynamic pressure values and grid refinement levels.

An analytic solution for bending of multilayered structures with interlayer-slip

Layered structures are prevalent in both natural environments and engineered composite materials. The elastic bending behavior of these structures is primarily governed by properties of their abundant interfaces. While the behavior of two- and three-layered beams has been extensively studied, this research shifts the focus to the impact of elastic shearing at interfaces on the deflection of multilayered structures comprising a substantial number of layers. We present an analytical solution indicating that the bending properties of multilayered beams and plates are nonlinearly dependent on interfacial stiffness. Denoting Se as the effective bending stiffness of an n-layered beam of length L, and S0 as the bending stiffness of a perfectly bound counterpart, we arrive at SeS0=11+(n2−1)tanhαLαL where αL represents a dimensionless parameter related to geometry and material properties. The analytical solutions, validated through finite element simulations, highlight the substantial variations in stiffness across different layered structures. This solution could also be instrumental in assessing interfacial damage and delamination in lamellar composites.

Analysis of RCC Framed 45 Storey Building Using Different Combination of Outriggers

In this modern age of civil engineering, the construction industry has embraced a notable inclination towards erecting towering structures, with skyscrapers emerging as integral components of urban development. This trend presents a multifaceted challenge, not only for architects but also for structural engineers, who must ensure these high-rise edifices possess a robust design foundation capable of withstanding diverse loads and their combinations. While both wind and seismic forces exert significant pressures on tall buildings, the former often takes precedence due to its higher magnitude and frequency. Consequently, the structural design of high-rise buildings necessitates careful consideration of gravity, wind, and seismic loads. This study delves into the behaviour of reinforced concrete (RC) framed high-rise buildings (comprising 45 stories) augmented with outrigger truss systems constructed from both concrete and steel bracings. By exploring various configurations of outrigger placement, the aim is to mitigate structural deflection and compare the efficacy against conventional RC systems, both with and without shear walls.

NAVIER SOLUTION FOR DEFLECTION AND STRESSES ANALYSIS OF FGM SANDWICH PLATE RESTING ON PASTERNAK ELASTIC FOUNDATION

In this article, the first-order shear deformation theory (FSDT) and Navier’s solution are used to establish analytical solutions for analyzing the deflection and stresses of FGM sandwich plate structures resting on a Pasternak elastic foundation. The top and bottom layers consist of functionally graded materials (P-FGM) that vary according to the exponential law along the thickness direction, while the core layer is composed of a porous material. The boundary condition of the plate is simply supported on all the edges, and the plate is subjected to a sinusoidal distributed load perpendicular to the mid-surface. The reliability of the model is validated through comparison with findings published in reputable journals. The effects of material parameters, geometric dimensions, foundation coefficients, and face-core-face thickness ratios on deflection and stress components of rectangular FGM sandwich plates are investigated in detail in parametric studies.

OPTIMIZATION OF STEEL PROFILE DIMENSIONS AND BOLT CONNECTIONS IN INTAKE STRUCTURES FOR ENHANCED STRUCTURAL INTEGRITY

Intake structures are facilities for clean water supply situated along riverbanks. These structures are reinforced concrete with pile foundations, and the intake structure comprises a profiled steel frame serving as the upper column-beam framework. The implementation of steel structures demands a high level of precision, particularly in designing connections between sectional steel beams and columns. This study, therefore, aims to determine the optimal dimensions for steel profiles by referring to the design of bolt connections as specified in SNI 1729-2020, particularly for steel beam columns subjected to pump loads and load combinations. The analysis concludes that all three material types meet the safety criteria, with a structural ratio value of ≤ 1 and structural deflection within the allowable limits. Additionally, after assessing the steel column and beam sections' capacity to bear pump loads, it was determined that the optimal bolt connection involved 8 bolts of 24 mm diameter. The ideal supplementary steel plate connection required a plate thickness of 13 mm.

Continuous mapping of deformation over a ship structure model based on pointwise measurements

The development of structural monitoring systems on-board vehicles aims to achieve a full-picture of the vehicle response under operating conditions. The use of different data sources is a key point for many SHM approaches which demand for extensive information and data fusion techniques to address the specific inverse problem in a robust way. Therefore, a procedure to transform pointwise measurements into a continuous representation of the monitored structure is presented in this paper. To achieve the desired monitoring goals, a numerical approach which combines experimental recorded data and modelled responses from a ship structural model is developed. Craig-Bampton truncation technique is applied on the FE vehicle model to reduce elastic dofs and obtain a computationally cost-effective model. The main advantage of Craig-Bampton modes is the capability to keep unchanged the information at the sensor nodes. A state observer is then built to evaluate the elastic deflection field and the loads over the structure in the points where no measurement is available. A natural second-order observer is exploited as it is more suited for the present application than the Kalman filter. To enhance the observer performances, an optimization process is carried out based on a learning phase. Following a previous paper about theoretical aspects of the virtual sensing approach on 1D structures. the developed techniques are here applied to the monitoring of the structural deflections and the ambient excitation relative to an elastically scaled model of a fast catamaran, tested in the towing-tank. Accelerations and strain-gage data are used to reconstruct the elastic deformations of the physical model metallic backbone scaling the reference ship behavior. Hydrodynamic load data relative to the demihull portions and the wetdeck are obtained as well.

Vision-Based Displacement Measurement of Pedestrian Suspension Bridges

The number of pedestrian suspension bridges in South Korea increased from 188 to 208 between 2020 and 2021, with a corresponding increase in the number of visitors. However, these bridges are susceptible to structural issues due to natural factors and their continual usage, necessitating structural health monitoring (SHM) to prevent accidents. SHM requires data on the structure's vibration, deflection, and deformation. This study proposes a system utilizing targets for vision-based dynamic behavior measurement of pedestrian suspension bridges through image processing and applying these data to SHM. The proposed method demonstrated a deviation of only 1.3150 mm when compared to the direct measurement of the bridge's dynamic behavior and yielded almost identical mode shape results. The proposed approach can be effectively employed to inspect and maintain pedestrian suspension bridges.

Analysis of deformation in tensegrity structures with curved compressed members

Tensegrity structures are prestressed structures consisting of compressed members connected by prestressed tensioned members. Due to their properties, such as flexibility and lightness, mobile robots based on these structures are an attractive subject of research and are suitable for space applications. In this work, a mobile robot based on a tensegrity structure with two curved members connected by eight tensioned strings is analyzed in terms of deformation in the curved members. Further, the difference in locomotion trajectory between the undeformed and deformed structure after the prestress is analyzed. For that, the theory of large deflections of rod-like structures is used. To determine the relationship between acting forces and the deformation, the structure is optimized using minimization algorithms in Python. The results are validated by parameter studies in FEM. The analysis shows that the distance between the two curved members significantly influences the structure’s locomotion. It can be said that the deformation of the components significantly influences the locomotion of tensegrity structures and should be considered when analyzing highly compliant structures.

Self‐Powered Digital Angle Sensor Based on Triboelectric Signal for Variable Structure of Aircraft

AbstractThe rapid development of aircraft in recent years has attracted more attention, especially the issue of safe flight for aircraft. Some existing angle detection sensors are difficult to adapt to the development speed of the current aircraft due to the expensive price and large size, so there is an immediate need for new technology that can suit the current aircraft. Here, a self‐powered digital angle sensor that is compact, simple, and lightweight is introduced. This sensor eliminates the need for an external power supply and demonstrates highly sensitive signal detection at the volt level when the variable structure of the aircraft is working. The sensor is designed with a thickness of 7.3 mm, a volume of 16.6 cm3, and a weight of 9.85 g. Its lightweight and compact structure allows for seamless integration into aircraft without causing significant impact. The sensor not only provides real‐time monitoring the aircraft's variable structure deflection states, including deflection direction and angle but also alerts operators to any anomalies in deflection. Its small size and self‐powered capability make it an ideal solution for aircraft applications, enhancing safety and efficiency during flight.

A Conceptual Study of Wind Load With Different Types of Lateral Load Resisting Methods in 15-Storey Structure

Abstract: In order to strengthen rigidity and control the base deflection of a high-rise structure, stabilizers and trusses are typically used. A stabilizing layer on the building's roof efficiently fortifies the structure. Lateral stiffness is increased by each succeeding stabilizer layer, albeit less so than by the preceding stabilizer layer. The essential components in multi-storey buildings that can withstand shear forces are the shear walls. More efficient shear walls are required as building code requirements rise and tall structures and skyscrapers get taller. The ductility, energy dissipation capacity, and deformation capacity of conventional reinforced concrete shear walls are limited. In the field of structural engineering, a damper in a building is a device intended to lessen the impact of dynamic forces like seismic vibrations or oscillations caused by wind. These devices are necessary in tall or flexible constructions where excessive movement may cause structural damage or cause discomfort for the residents. In this research, we prepare four different cases of 15-storey structure. All modeling work performed in ETABS 2016. Material properties use concrete grade M-40 and steel grade Fe375 and Fe250. One case has shear walls on corners, second case have FVD damper on corners and last case have outrigger on corners. For design wind speed data use code IS: 875-(2015).

Static hydroelastic study of composite T-foils with beam and lifting line models

Well-designed hydrofoils improve ship resistance and seakeeping by lifting the hull above the water. With greater speeds come greater loads, and the two-way interaction of structural deflections of lifting surfaces on the hydrodynamics must be considered. Tailored structural anisotropy can improve hydrodynamic and structural efficiency of lifting surfaces compared to rigid counterparts by exploiting the layup of composite materials. Structural efficiency here means reduced risk of structural failure for a given amount of material, and hydrodynamic efficiency means lower drag. A T-foil is a prototypical multi-component appendage, consisting of the foil wing and the strut, which we investigate in this work. We use simple composite beam and lifting line theory to explore the static fluid-structure interaction of a composite T-foil for a variety of fiber angles (θf = 0˝ , ˘15˝ ). We apply a simple approximation on lift coefficient at infinite Froude number (F n) to model the free-surface effects, which is valid at high depth-based Froude numbers (F nh ą10a h/c) when CL is independent of F nh and the inertial effects dominate. Results for the moth rudder T-foil geometry studied here indicate that aligning composite fibers towards the leading edge results in a more hydrostructurally efficient foil and that free-surface effects are minor because of the large submergence for this flow condition.

Enhancing Seismic Performance: A Comprehensive Study on Masonry and Reinforced Concrete Structures Considering Soil Properties and Environmental Impact Assessment

Approximately 20,000 people are killed annually on average by building and infrastructure collapses and failures caused by seismic activities. In earlier times, seismic design codes and specifications set minimal requirements for life safety performance levels. Earthquakes can be thought of as recurring events in seismically active areas, with severity states ranging from serviceability to ultimate levels. Buildings designed in accordance with site-specific response spectra, which take into account soil properties based on ground motion amplification data, are better at withstanding such forces and serving their design purposes. This study aims to investigate the site response of reinforced and masonry buildings, considering the effect of soil properties based on the amplification of ground motion data, and to compare the life cycle assessment of the buildings under consideration based on the design and the site-specific response spectrum. In terms of soil properties and site-specific response spectra, STRATA is used to determine the site-specific response for the considered locations for a return period of 475 years for 100 realizations based on the randomization of site properties. For structural analysis, AxisVM software, which is a compatible finite element analysis, is used for building design and analysis, generating comparative results based on the design- and site-specific spectra. To determine and identify potential failures in the model, response spectra were applied to understand the difference in horizontal deflection in two different instances (for elastic design- and site-specific spectra). After building design and analysis is performed, a life cycle analysis in terms of environmental impact assesments using OpenLCA and IdematLightLCA is done. This is done to ascertain the additional expenses in terms of ecocosts and carbon footprints on some failed elements in the structure which are required to make the buildings more resilient when the site-specific response spectrum is applied and to compare the potential economic losses that may occur based on ecological costs. The study presents a comprehensive investigation into the seismic response of masonry and reinforced concrete buildings in Győr, Hungary, incorporating advanced geophysical techniques like multichannel surface wave (MASW) and structural analysis software, AxisVM. Additionally, tailored retrofitting strategies are explored to enhance structural resilience in seismic-prone regions. Significant ground amplifications in soil properties across different profiles are revealed, emphasizing the effectiveness of these strategies in reducing structural deflection and improving resilience. Highlights of the results are observed where the site-specific response spectra are higher than the EC8 design response spectrum. Furthermore, the research underscores the substantial environmental impact, considering both ecocosts and CO2 emissions associated with retrofitting measures, highlighting the importance of sustainable structural interventions in mitigating seismic risks.

Stress-strain state of steel corrugated I-beams prestressed by flange drawing

The material distribution in structures is an urgent scientific and technical problem. Corrugated and prestressed steel structures are efficient and reliable.Purpose: The aim of this paper is to study the operation of steel I-beam with a thin corrugated wall, prestressed by flange drawing.Methodology/approach: Finite element modeling of beams with corrugated and flat walls (models with flat wall, transversely corrugated wall, downward corrugation at an angle of inclination 20 degrees, ascending corrugation at an angle of inclination 20 degrees). The proposed method is used for prestressing the lower beam flange using negative temperature effects. Numerical experiments in LIRA-SAPR software allow to obtain the stress distribution isofields and deformation patterns. A comparative analysis of the stress-strain state.Research findings: The normal stress distribution over flanges of corrugated beams with and without prestress under the external load has low difference. Prestress produces significant deflections of structures and the greatest deflection of the beam with ascending corrugations.