Strong Intramolecular Hydrogen Research Articles

Unusual Cross-Conjugation in Cyclic Dipeptide-Based Building Blocks for Donor-Acceptor Semiconducting Conjugated Polymers.

Cross conjugation, though prevalent in many organic compounds, is typically considered less effective for electron delocalization compared to linear conjugation. Consequently, it is rarely used as the backbone structure for semiconducting conjugated polymers. In this study, we designed and synthesized a novel building block, TIDP, which features a central cyclic dipeptide with cross conjugation characteristics. Strong intramolecular hydrogen bonding interactions confer TIDP with a highly rigid and coplanar conformation. Importantly, theoretical calculations reveal that π electrons are well delocalized across the entire structure, despite its low aromaticity. Conjugated polymers incorporating TIDP exhibit high charge carrier mobilities, demonstrating the effective π electrons delocalization of this innovative building block. Our findings show that with rational design, cross conjugation can achieve effective π electrons delocalization, providing a valuable approach for developing high-performance conjugated polymers for organic electronic materials.

Unusual Cross‐Conjugation in Cyclic Dipeptide‐Based Building Blocks for Donor–Acceptor Semiconducting Conjugated Polymers

AbstractCross conjugation, though prevalent in many organic compounds, is typically considered less effective for electron delocalization compared to linear conjugation. Consequently, it is rarely used as the backbone structure for semiconducting conjugated polymers. In this study, we designed and synthesized a novel building block, TIDP, which features a central cyclic dipeptide with cross conjugation characteristics. Strong intramolecular hydrogen bonding interactions confer TIDP with a highly rigid and coplanar conformation. Importantly, theoretical calculations reveal that π electrons are well delocalized across the entire structure, despite its low aromaticity. Conjugated polymers incorporating TIDP exhibit high charge carrier mobilities, demonstrating the effective π electrons delocalization of this innovative building block. Our findings show that with rational design, cross conjugation can achieve effective π electrons delocalization, providing a valuable approach for developing high‐performance conjugated polymers for organic electronic materials.

Three‐dimensional (3‐D) fluoride molecular glue to improve the SnO2/perovskite interface for efficient perovskite solar cells

Aiming at numerous defects at SnO2/perovskite interface and lattice mismatch in perovskite solar cells (PSCs), we design a kind of three‐dimensional (3D) molecular glue (KBF4‐TFMSA), which is derived from strong intramolecular hydrogen bonding interaction between potassium tetrafluoroborate (KBF4) and trifluoromethanesulfonamide (TFMSA). A remarkable efficiency of 25.8% with negligible hysteresis and a stabilized power output of 25.0% have been achieved, in addition, 24.57% certified efficiency of 1 cm2 device is also obtained. Further investigation reveals that this KBF4‐TFMSA can interact with oxygen vacancies and under‐coordinated Sn(IV) from the SnO2, in the meantime, FA+ (NH2‐C=NH) and K+ cations can be well fixed by hydrogen bonding interaction between FA+ and BF4‐, and electrostatic attraction between sulfonyl oxygen and K+ ions, respectively. Thereby, FAPbI3 crystal grain sizes are increased, interfacial defects are significantly reduced and carrier extraction/transport is facilitated, leading to better cell performance and excellent stabilities. Non‐encapsulated devices can maintain 91% of their initial efficiency under maximum‐power‐point (MPP) tracking while continuous illumination (~100 mW cm‐2) for 1000 h, and retain 91% of the initial efficiency after 1000 h “double 60” damp‐heat stability testing (60°C and 60%RH (RH, relatively humidity)).

Three-dimensional (3-D) fluoride molecular glue to improve the SnO2/perovskite interface for efficient perovskite solar cells.

Aiming at numerous defects at SnO2/perovskite interface and lattice mismatch in perovskite solar cells (PSCs), we design a kind of three-dimensional (3D) molecular glue (KBF4-TFMSA), which is derived from strong intramolecular hydrogen bonding interaction between potassium tetrafluoroborate (KBF4) and trifluoromethanesulfonamide (TFMSA). A remarkable efficiency of 25.8% with negligible hysteresis and a stabilized power output of 25.0% have been achieved, in addition, 24.57% certified efficiency of 1 cm2 device is also obtained. Further investigation reveals that this KBF4-TFMSA can interact with oxygen vacancies and under-coordinated Sn(IV) from the SnO2, in the meantime, FA+ (NH2-C=NH) and K+ cations can be well fixed by hydrogen bonding interaction between FA+ and BF4-, and electrostatic attraction between sulfonyl oxygen and K+ ions, respectively. Thereby, FAPbI3 crystal grain sizes are increased, interfacial defects are significantly reduced and carrier extraction/transport is facilitated, leading to better cell performance and excellent stabilities. Non-encapsulated devices can maintain 91% of their initial efficiency under maximum-power-point (MPP) tracking while continuous illumination (~100 mW cm-2) for 1000 h, and retain 91% of the initial efficiency after 1000 h "double 60" damp-heat stability testing (60°C and 60%RH (RH, relatively humidity)).

Exploration of Synthesis and Coordination Chemistry of Thiazole-Containing Calix[3]Pyrroles

Calix[n]pyrroles have been used as powerful and specific receptors and as extractants for anions and ion pairs over the past 20 years. In the recent past, calix[4]pyrroles have been used as systems that can move ions and ion pairs over lipophilic membranes [1]. Unfortunately, the coordination chemistry of calix[n]pyrroles hardly explored. The ring-contracted analog of calix[n]pyrrole, calix[3]pyrrole, was synthesized and recently published [2]. The structure of calix[3]pyrrole and its analogues is strained, and they show an appealing strain-induced ring expansion response. On the other hand, the synthesis of calix[3]pyrrole requires multistep reactions including cyclization of hexaketone precursor and Paar–Knorr synthesis with the total yield of 4%. Extended use of calix[3]pyrrole analogues necessitates further refinement of the synthesis process.Here, we demonstrate the synthesis of new calix[3]pyrroles analogue, calix[1]pyrrole[2]thiazole (3). Direct macrocyclization between bis(α-bromoketone) and 2,2-dimethylpropane (bis-thioamide) produced the calix[1]furan[2]thiazole (1), with 60% yield. The furan unit of 1 was converted into pyrrole to give calix[1]pyrrole[2]thiazole 3 (Figure 1).Single-crystal X-ray analysis revealed a cone-shaped conformation of calix[1]pyrrole[2]thiazole 3, with all three heterocycles pointing in the same direction through strong intramolecular hydrogen bonding. However, unlike calix[3]pyrrole, calix[1]pyrrole[2]thiazole was completely stable under acidic conditions, which may be due to the basic nature of the thiazolimine units.Metal coordination of calix[1]pyrrole[2]thiazole was attempted and its Zn(II), Ag(I) and Pd(II) complexes were obtained by appropriate metalation procedures. The central metal ion of the Zn(II) complex is coordinated by a conical 3 and an axial ethyl group to behave as a monoanionic tridentate ligand. In contrast, it acts as a bidentate neutral ligand for Pd(II) or Ag(I) complexation. The synthesis of meso-aza calix[1]pyrrole[2]thiazole is in progress. Figure 1

Cycloaddition reaction of methylidyne radical with dipyrromethanol: quantum chemical insights into the formation of di(pyridin-2-yl)methanol

Density functional theory was employed to investigate methylidyne radical reaction on to the unsaturation of dipyrromethanol moiety through cycloaddition forming a six membered di(pyridin-2-yl)methanol followed by H-elimination via ring expansion. Time-dependent density functional theory (TD-DFT) simulations were performed to figure out the ultraviolet–visible spectrum of dipyrromethanol and di(pyridin-2-yl)methanol. Ultraviolet–visible spectrum of dipyrromethanol and di(pyridin-2-yl)methanol shows that two sharp absorption peaks were obtained at λ max = 161 nm and 206 nm for the reactant dipyrromethanol while a sharp peak was observed for the product di(pyridin-2-yl)methanol at shorter wavelength (λ max = 170 nm). The theoretical IR spectrum of dipyrromethanol and di(pyridin-2-yl)methanol shows that a significant red shift of 129 cm−1 was observed in the case of di(pyridin-2-yl)methanol due to presence of two strong intra-molecular hydrogen bonds, which indicates its higher stability than the dipyrromethanol. HOMO–LUMO energy gap calculations and natural bond orbital (NBO) analysis endorse the type of electronic transition for the desired product di(pyridin-2-yl)methanol is π–π*. The global reactivity analysis shows the electron donor and acceptor nature of dipyrromethanol and methylidyne radical, respectively. A potential energy surface is constructed via methylidyne radical addition, ring expansion, and hydrogen elimination transition states. Thermodynamics study and potential energy surface of the title reaction indicates its highly exothermicity and spontaneous in nature.

Antioxidant properties of catechin and its 3′O-α-glucoside: Insights from computational chemistry calculations

Density functional theory (DFT) calculations were used to investigate the conformational landscape of catechin and one of its main glucoside derivative (catechin-3′ O- α −glucopyranoside), and to determine the corresponding antioxidant properties. These investigations were carried out in benzene and water using the SMD universal continuum solvation model. Both properties were found to be significantly affected. The structures are characterized in both solvents by strong intramolecular hydrogen bonds (IMHB). In an apolar environment, Hydrogen Atom Transfer (HAT) is by far favored whereas in water the Sequential Proton Loss Electron Transfer (SPLET) mechanism is strongly preferred. In benzene, the catechin fragment has the best antioxidant character (from 27 kJ/mole) whereas in polar surroundings, the glucoside derivative has a slightly better antiradical activity (from 5 kJ/mole). Our results confirm the key role of the 3′-OH and 4′-OH groups of the catechole ring in these properties.

A perspective on cellulose dissolution with deep eutectic solvents

Currently, membrane manufacturing relies heavily on fossil-based solvents and polymers, resulting in significant negative impacts on human health and the environment. Thus, there is an urgent need for eco-friendly, low-toxicity, and sustainable solvents and polymers to comply with the United Nations’ sustainable development goals. Cellulose, as a green, natural, and abundant polymer, offers a sustainable source for membrane manufacturing. However, a significant challenge exists in dissolving cellulose due to strong intermolecular and intramolecular hydrogen bonds within cellulose molecules. Deep eutectic solvents (DESs), which contain both hydrogen bond donor and acceptor groups, have received significant attention as alternative solvents for cellulose dissolution owing to their low cost, low toxicity, environmentally friendly nature, ease of synthesis, and versatility. This review examines experimental studies, and theoretical approaches, highlighting key findings and factors influencing cellulose dissolution in deep eutectic solvents.

Promoting Ruddlesden-Popper Perovskite Formation by Tailoring Spacer Intramolecular Interaction for Efficient and Stable Solar Cells.

Low-dimensional Ruddlesden-Popper phase (LDRP) perovskites are widely studied in the field of photovoltaics due to their tunable energy-band properties, enhanced photostability, and improved environmental stability compared to the 3D perovskites. However, the insulating spacers with weak intramolecular interaction used in LDRP materials limit the out-of-plane charge transport, leading to poor device performance of LDRP perovskite solar cells (PSCs). Here, a functional ligand, 3-guanidinopropanoic acid (GPA), which is capable of forming strong intramolecular hydrogen bonds through the carboxylic acid group, is employed as an organic spacer for LDRP PSCs. Owing to the strong interaction between GPA molecules, high-quality LDRP (GPA)2(MA)n-1PbnI3n+1 film with promoted formation of n = 5 phase, improved crystallinity, preferential vertical growth orientations, reduced trap-state density, and prolonged carrier lifetime is achieved using GPAI as the dimensionality regulator compared to butylamine hydroiodide (BAI). As a result, GPA-based LDRP PSC exhibits a champion power conversion efficiency of 18.16% that is much superior to the BA-based LDRP PSC (15.43%). Importantly, the optimized GPA-based LDRP PSCs without encapsulation show enhanced illumination, thermal, storage, and humidity stability compared to BA-based ones. This work provides new insights into producing high n value LDRP films and their efficient and stable PSCs.

Highly efficient circularly polarized phosphorescent electroluminescence from iridium(iii) complexes with chiral ligands

CP-OLEDs based on new phosphors exhibited an EQEmax of 31.9% and a |gEL| of up to 3.0 × 10−3.

Crown ether-like octanuclear molybdenum(V) clusters for cation binding and gas adsorption.

Octanuclear polyoxomolybdenum-based porous materials, Na8[Mo8O8(μ2-O)8(μ2-OH)8(3-apz)4]2·26H2O (1, 3-Hapz = 3-aminopyrazole), K8[Mo8O8(μ2-O)8(μ2-OH)8(3-apz)4]2·7H2O (2) and (NH4)4[Mo8O8(μ2-O)8(μ2-OH)4(3-apz)8]·20.5H2O (3), have been successfully synthesized by a hydrothermal method and fully characterized. X-ray structural analyses show that microporous materials 1-3 contain round pores formed by octanuclear molybdenum-oxygen groups connected sequentially with pore sizes of 4.0, 4.0, and 4.8 Å, respectively. Both 1 and 2 are composed of two {Mo8} rings, which are connected by strong intramolecular hydrogen bonds between bridging hydroxy groups and oxygen atoms to form dimeric structures. The central pores in 1 and 2 are occupied by Na+ and K+, respectively, while they are empty in 3. This reflects the structural expansion and contraction effects induced by different cations. Through intermolecular stacking, 1-3 also exhibit channels with sizes of 14.0 × 6.4, 4.6 × 2.6, and 5.4 × 5.4 Å, respectively, which were used for the studies of gas adsorption. The results show that 1-3 can selectively adsorb CO2 and O2, including the empty hole in 3, while they show little or no affinity for gases H2, N2, and CH4. Moreover, an additional polyoxomolybdenum-based species (Mo8O26)n·4n(3-H2apz) (4) has been obtained with protonated 3-aminopyrazole in the absence of a reducing agent, which can serve as an intermediate for the polyoxomolybdenum-based porous products.

SYNTHESIS AND STUDY OF SOME NOVEL β-ARYLAMINO-2-OXY-5- METHYLPROPIOPHENONES AS POLYETHYLENE STABILIZERS

The number of -arylamino-2-oxy-5-methylpropiophenones has been synthesized by reacting of - dimethylamino-2-oxy-5-methylpropiophenone hydrochloric acid salt with aniline derivatives in order to use these compounds as stabilizers for polyethylene. It was shown that the thermal stability of the compounds, depending on the nature of the substituent in the aniline fragment of the molecule was observed in a temperature range between 165 and 213°C. All studied compounds, introduced into polyethylene, increased its resistance to temperature effects. It was revealed that -arylamino-2-oxy-5-methylpropiophenones had a stabilizing effect due to the suppression of thermo-oxidative degradation of polyethylene. They multiplied the oxidation induction period of polyethylene and reduced the rate of oxidation. Among the compounds studied -phenoxybenzylamino-2-oxy-5-methylpropiophenone showed the highest stabilizing effect. All studied compounds had sufficient light-stabilizing activity, substantially due the presence in their molecules of a strong intramolecular hydrogen bond IHB (OH ... O = C) of the chelate type between the phenolic hydroxyl proton and the carbonyl oxygen of the acyl group.

Macrocyclization-induce emission enhancement characteristics of benzothiadiazole-based macrocycles: A theoretical study

We present a comprehensive investigation into the molecular structures in the ground state and the first singlet excited state, intramolecular and intermolecular interactions, as well as the emission properties of monomers, dimers and macrocycles using density functional theory and time-dependent density functional theory. Our study aims to unveil the macrocyclization-induce emission enhancement principle for benzothiadiazole-based macrocycles. Compared with the typical π-π stacking of monomers, macrocycles exhibit the tighter stacking arrangement due to the presence of strong intramolecular and intermolecular hydrogen bond interactions and the rigid triangular geometry of macrocycle, which is conducive to the enhancement of emissions efficiency. The calculated oscillator strength of macrocycles in the first excited state is much higher than that of dimers composed of two monomers. Meanwhile, the large transition electric dipole moment is beneficial for enhancing the emission efficiency. Additionally, our study reveals an emission wavelength red-shift for macrocycles after “CH”/N substitution in the acceptor moiety, and the transition mode from LUMO to HOMO can be mainly attributed to intramolecular charge transition characters from acceptor to donor fragments. Our theoretical study might provide valuable insights for the design of innovative luminescent macrocycles with high emission efficiency.

Near-infrared OLEDs with high radiance of ∼105 mW Sr−1 m−2 for single-wavelength oxygen saturation detection

Real-time in-home monitoring oxygen saturation (SpO2) is of great significance for early diagnosis and treatment of severe COVID-19, however, which should be based on multi-wavelength technology and complicated equipment. Herein, as a proof of concept, 740 nm is chosen as singlet light source for single-wavelength SpO2 detection, since absorbance differences between oxyhemoglobin (HbO2) and other interferences are the most rational. To controllably optimize excited-state characteristics of a near-infrared (NIR) thermally activated delayed fluorescence (TADF) emitters, an “extra conjugation” method is demonstrated by CNQP-TPA, whose 2,3-dicyanoquinoxaline phenanthroline (CNQP) acceptor forms strong intramolecular hydrogen bonds with two phenyls of triphenylamine (TPA) donors, which not only reduce excited-state relaxation-induced energy lose, but also provide more space for accurate modulation of intermolecular charge transfer (CT) interactions. As consequence, at the suitable doping concentration, CNQP-TPA endowed its device with a high radiance reaching ∼105 mW Sr−1 m−2 and desired electroluminescence peak at 744 nm. This device is further used as light source to detect SpO2 variation under single-wavelength mode. These results indicate the potential of NIR TADF materials and devices for in-home SpO2 monitoring and pre-diagnosis and prevention of severe COVID-19.

Abraham general solvation parameter model: intramolecular hydrogen bond formation and its effect on the A- and B-descriptor values of select tetracycline derivatives

ABSTRACT Experiment-based Abraham model solute descriptors are calculated from published solubility data for sancycline dissolved in methanol, ethanol, 1-propanol, 2-propanol, 1-butanol, 2-methyl-1-propanol, 1-octanol, cyclohexane, acetonitrile, ethyl acetate and 1,4-dioxane at 298.15 K. The calculated descriptor values suggest that sancycline engages in strong intramolecular hydrogen formation. The hydrogen-bond acidity and basicity solute descriptor values obtained from the experimental solubility data are considerably smaller than what would be expected based on the four hydroxyl, one amide, one dimethylamino and two carbonyl functional groups contained in the molecule. Our study further shows that existing group contribution and machine learning methods provide rather poor estimates of the experiment-based solute descriptors of sancycline.

Trans-3-Benzyloxycarbonylamino-1-methyl-3-(methylcarbamoyl)azetidine-1-oxide

trans-3-Benzyloxycarbonylamino-1-methyl-3-(methylcarbamoyl)azetidine-1-oxide was prepared by stereoselective oxidation of the corresponding azetidine precursor. The stable molecule was characterized in a low-polarity solution by IR, 1H-NMR and 13C-NMR, and in the solid state as a co-crystal with water by X-Ray diffraction. The N-oxide function made a strong intramolecular 7-membered ring hydrogen bond with the methyl amide NH in solution and formed an intermolecular H-bond with the carbamate NH in a neighboring molecule in the solid state.

Synthesis, structure and Hirshfeld surface analysis of a coordination compound of cadmium acetate with 2-amino-benzoxazole.

A first coordination compound of 2-amino-benzoxazole (2AB), namely, bis-(2-amino-benzoxazole-κN 3)bis-(acetato-κ2 O,O')cadmium(II), [Cd(CH3COO)2(2AB)2], has been synthesized from ethanol solutions of Cd(CH3(COO)2 and 2AB. In the monoclinic crystals with the space group C21/c, the cadmium ions coordinate two neutral 2AB mol-ecules in a monodentate fashion through the oxazole N atom, while two acetate ligands are coordinated through the O atoms in a bidentate manner. The coordination polyhedron of the central ion is substanti-ally distorted octa-hedral. There are two relatively strong intra-molecular hydrogen bonds in the complex mol-ecule. Additionally, two inter-molecular hydrogen bonds associate complex mol-ecules into columns running in the [10] and [110] directions. The Hirshfeld surface analysis shows that 45.7% of the inter-molecular inter-actions are from H⋯H contacts, 24.7% are from O⋯H/H⋯O contacts and 18.8% are from C⋯H/H⋯C contacts, while other contributions are from N⋯H/H⋯N and O⋯O contacts.

Design, synthesis, and characterization of highly photostable Pigment Yellow 74 derivatives for painting applications

The present objective of this study was develop highly photostable novel Pigment Yellow 74 (P.Y. 74) derivatives. The structures of the synthesized compounds were confirmed by NMR, IR, and HRMS spectral analysis. From the NMR, and IR spectra, pigments exist in the hydrazone tautomeric form. Irradiating pigment samples with UV light allowed us to test their photostability in liquid and spin-coated films. The results revealed that the synthesized pigments PYA, PYB, and PYC have better photostability than the commercial P.Y. 74. The higher photostability of the synthesized pigment (PYA) is mainly due to the presence of strong intramolecular hydrogen bonding. The shifting of pivaloyl carbonyl stretching frequencies towards lower wavenumbers in the FT-IR spectra, as well as the pigment exhibiting sharp reflections in the powder XRD spectra, demonstrate this. The studied results provide insight into the synthesized PYA as a possible replacement to the commercial P.Y. 74 in the color industry.

Inter- vs. Intra-Molecular Hydrogen Bond in Complexes of Nitrophthalic Acids with Pyridine.

This study covers the analysis of isomeric forms of nitrophthalic acids with pyridine. This work dwells on the complementary experimental (X-ray, IR and Raman) and theoretical (Car-Parrinello Molecular Dynamics (CPMD) and Density Functional Theory (DFT)) studies of the obtained complexes. The conducted studies showed that steric repulsion between the nitro group in ortho-position and the carboxyl group causes significant isomeric changes. Modeling of the nitrophthalic acid-pyridine complex yielded a short strong intramolecular hydrogen bond (SSHB). The transition energy from the isomeric form with an intermolecular hydrogen bond to the isomeric form with an intramolecular hydrogen bond was estimated.

Synthesis and Crystal Structure of a New Complex of Nickel(II) Nitrate and Ethoxycarbonyl-Substituted (γ-piperidono)aza-14-crown-4-ether

A new coordination compound—derivative of aza-14-crown-4-ether, containing an ethoxycarbonyl subunit, with nickel(II) nitrate, of the [Ni3(NO3)4L4]2(NO3) composition—has been obtained for the first time in the form of single crystals. The presence of nickel atoms in the complex is confirmed by X-ray fluorescence analysis. The complex structure has been studied by precise X-ray diffraction on a laboratory X-ray source. The molecule of this complex is shown to have an intricate geometry and consist of four pairwise symmetric ligand molecules, coordinated by three nickel atoms. Stabilization of the complex molecule is provided by the presence of strong intramolecular hydrogen bonds, involving a crown-ether fragment.